1/8 T. Kume, Y. Honda, and T. Tauchi High Energy Accelerator Research Organization (KEK) T. Suehara,...
-
Upload
griselda-williams -
Category
Documents
-
view
213 -
download
0
Transcript of 1/8 T. Kume, Y. Honda, and T. Tauchi High Energy Accelerator Research Organization (KEK) T. Suehara,...
1/8
T. Kume, Y. Honda, and T. Tauchi High Energy Accelerator Research Organization (KEK)
T. Suehara, H. Yoda, M. Oroku, T. Yamanaka and Y. KamiyaThe univ. of Tokyo
T. SanukiTohoku Univ.
Mount stabilization for Shintake monitor-65th ATF2 Project meeting December 20, 2007
2/8
Specifications expected for new table support
• ~10nm of amplitude for incoherent vibration with floor
– >Use steal honeycomb core (<Al), thicker (110mm->250mm)
– >Highly ridged mount on floor without any insulator
• ±5mm of height adjustable range with accuracy of ±1mm
– >Shim between table mount and floor
• ±2.5mm of horizontal position adjustable range perpendicular to beam with accuracy of ±1mm
– >Slide sheet between vertical table and horizontal table
3/8
Position and height adjustmentby using slide sheet and shim
Vertical table for mounting interferometer optics(made of non-magnetic SUS and steel honeycomb core)
Beam
Floor
Horizontal table for mounting vertical table(made of steel honeycomb core)
Cover for preventing LASAR scattering
Slide sheet for horizontal position
adjustmentShim for height adjustment
Mou
ntin
g fa
ce
4/8
Method for ensuring face contact on floorby using filler (clay?)
Beam
Floor
Filler for ensuring face contactbetween table and floor
Mou
ntin
g fa
ce
5/8
Shintake monitor mount-side viewassuming distance between end face of CLIC table and FF magnet is 20 m
m, distance between end face of FF magnet and IP is 1000 mm
Downstream ⇔ Upstream
6/8
Shintake monitor mount-top viewassuming beam goes center of CLIC table
7/8
Plan
• Make new optical table and mount (end of Feb.,2008., by Herz co.)
• Put new table and mount on IP (end of Feb., 2008., by Herz co.)
• Align laser optics on the new table and test optics
(~Sep.?, 2008. by U.Tokyo & KEK)
• Vibration measurement and adjustment (~May?, 2008., by Herz co.)
8/8
Schedule
2007Dec Jan. Feb Mar Apr May Jun Jul Aug
Overall
Univ. ofTokyo &
KEK
HERZCo. LTD.
Make Laser optics install & test
2008
Make new optical table & table mount
Install laser optics
Optics test
☆Vibrationmeasurement
☆Install
Design & makelaser cover