179195 08 Manual Usb Manhattan

8/12/2019 179195 08 Manual Usb Manhattan

1/23

HI-SPEEDUSB TO SATA/IDEADAPTERUSER MANUALMODEL 179195

MAN-179195-UM-0612-08


2/23

2

INTRODUCTION

Thank you for purchasing the MANHATTANHi-Speed USB to SATA/IDE Adapter,Model 179195.

This convenient device connects SATA, SATA-enhanced, IDE and enhanced-IDE

hard disks to desktop and notebook computers using a USB port. And with itsconvenient built-in, one-touch copy feature, you can more easily transfer, shareand back up les or store large le archives on external drives.

By following the instructions in this user manual, youll soon be enjoying thesepopular features: Supports data transfer SATA speeds up to 1.5 Gbps and Hi-Speed USB speeds

up to 480 Mbps Supports 48-bit LBA (Logical Block Addressing) Fits external SATA and IDE hard drives up to 5.25 Plug and Play Windows, Mac and Linux compatible and hot-swappable

Lifetime Warranty (For a complete list of country-specic warranties, go tomanhattan-products.com/warranty.)

System Requirements Available USB type-A port Windows XP/Vista/7

Package Contents Hi-Speed USB to SATA/IDE Adapter USB cable, 80 cm (31.5 in.) 4-pin power cable, 10 cm (4 in.) Power adapter, 1.5 m (59 in.)

Software CD with user manual; multilanguage quick install guide

USB cable

4-pin power cable

Power adapter


3/23

3

HARDWARE INSTALLATION

1. Always connect the Hi-Speed USB to SATA/IDE Adapter to the HDD port rst,then to the computers USB port. Windows will detect a new device andautomatically install the driver.

2. To verify the connection, go to Start / Control Panel / Device Manager. OpenHard disk controllers to display the newly added hard disk drive.3. If connecting to a new hard disk drive, use Device Manager or enter the

command to initialize and set its capacity. Format the HDD usingstandard procedures. If its icon appears on the desktop but you cant nd itlisted, check the following:

The HDD has been properly installed; and The HDD is set in the Master position.

SOFTWARE INSTALLATION

These steps are for the installation of the convenient one-touch backup software.NOTE:This software doesnt support Mac operating systems. Some images maylook different on your computer, as your software version may be slightly differentthan the one represented here.

1. Load the included software CD. The PC Clone EX setup wizards Welcomescreen will display automatically. Click Install to continue.


4/23

4

2. When the License and Warranty Agreement displays, click Agree to continue.

3. Enter the desired pathway for the installation or click Browse to nd a currentfolder. Click Install to continue.

4. The nal Setup screen will display a progress status bar. When nished, thewizard will display an Install complete! message. Click OK to exit the wizard.

Install Complete!


5/23

5

5. The PC Clone EX icon will appear in the system tray. To open the program, you can double-click the icon or right-click to display the menu option for selection.

CREATING PARTITIONS

NOTE:If the hard drive you have placed in the enclosure (the drive that you arecopying data to) has already been partitioned, you can proceed to the next section.

1. With the adapter plugged into a USB port on your computer and powered on (seeHardware Installation above), right-click My Computer on your desktop and goto Manage. (Or go to Start / Control Panel / Administrative Tools / ComputerManagement.)


6/23

6

2. In the left-hand le directory, click/select Disk Management so its screendisplays on the right. Right-click on the disk identied as Unallocated, thenclick/select New Partition... from the pop-up menu. NOTE:To conrm that thedrive youve placed in the enclosure is indeed the unallocated disk, disconnectthe USB cable and see if the corresponding Unallocated text disappears.

3. With the Format Partition screen displayed, select your preferred settings, thenclick Next to continue.


7/23

7

OPTION:An alternative pathway for accessing the formatting options is throughStart on your desktop, then All Programs / PCCloneEX / FNet FAT32 Format. Theformatting details and instructions will appear on the screens that display.

FAT32 FORMAT UTILITY

With the increases in drive capacities, the FAT32 Format Utility in older operatingsystems is unable to support data transfers in excess of 32 GB. The solution isto use the FNet formatting utility on the enclosed CD, which can quickly format adisk for as much as 4 TB (4,000 GB). Note that all data already on the disk will bedeleted.

1. Connect the HDD to the adapter and turn on the computer.2. Open PC Clone EX and select Visit FNet.

Show PCClone EX

Visit FNet


8/23

8

3. Conrm that the elds for USB Device and Drive to Format display yourpreferences and click Start.

4. Select Quick Format and click Start. Remember, all data previously loadedon the receiving HDD will be deleted.


9/23

9

5. A Status screen will display the progress of the formatting.

6. When the Format Complete message displays, click OK. The selected disk hasbeen formatted with the FAT32 le system.


10/23

10

ONE-TOUCH BACKUP FUNCTION

To use any of the features available with this function, be sure the adapter isplugged into a USB port on your computer and powered on, and that a backupdrive has been properly loaded in the enclosure. NOTE: Before backing up les

for the rst time using this device, its recommended that the function parametersbe set on the File Backup Settings screen in the PC Clone EXprogram.

1. With the PC Clone EX program open and the disk connected tothe adapter (see Hardware Installation above), press the Back Upbutton on the adapter.

2. A Files Backup Conrm screen will display. Click Backupto continue.

3. While the backup procedure is in progress, the PC Clone EX icon will ash in

the system tray and a status uplate will display every 10 seconds until thebackup is complete.

Quick Launch

The Quick Launch screen displays automatically when the PC Clone EX programis opened. From here, you can directly execute the File Backup function by clickingon the boxed icon (5in the image below) or select one of the other menu options:

1Quick Launch2File Backup

3File Manager4 Setup

5 Quick File Backup6 Minimize

7 About8 Help


11/23

11

Quick File Backup

1. As mentioned above, you can click on the Quick File Backup icon (5) when yourst open the program and are presented with the Quick Launch screen. NOTE:If using the backup function for the rst time, you may want to rst go to Setupto establish your preferred function parameters. Setup is where a hot key canbe created for even quicker use of the backup function.

2. With your les selected for backup, click OKwhen prompted.


12/23

12

3. When the le backup begins, a status bar displays to indicate the progress of the procedure. When the Backup nished! prompt displays, click OK.

File Manager

Managing les in PC Clone EX is just like managing les in Windows Explorer. Justdrag les between the xed device and the drive attached to the adapter.

Setup

You can select your preferences on this screen before you begin backing up les.

Options include creating a hotkey: a single command used to initiate the backupfunction.

HotkeysClick Editand enter any combination of keys (using Control and/or Shift and/or Altkeys plus any number, letter or function key) in the text eld to the left.


13/23

13

Files Backup TypeSelect Add les to existing backup to back up additional les; select Discard and

replace existing backup to completely re-copy selected les.OtherYou can select Quick le backup double conrm so that a conrmation box willdisplay whenever you use a hot key to initiate a backup. (This is enabled bydefault.) The other on-screen Setup options are self-explanatory.

File Backup

If youre navigating back from another menu screen and want to proceed with a lebackup, click on the File Backup icon. This screen lets you do a backup or restore.

Backing Up Files1. In the left-hand (Files Backup) window, select the folders/drives to be copied

from the source device. Click the File Backup icon (1) to continue.


14/23

14

2. With your les selected for backup, click OKwhen prompted.

3. When the le backup begins, a status bar displays to indicate the progress of the

procedure. When the Backup nished! prompt displays, click OK.

4. Conrm that the selected items now appear in the right-hand (USB Device) window.


15/23

15

IMPORTANT:A root directory (FNet) folder will display in the USB Device window.This is where all the backed-up les are stored, so be careful not to delete it unintentionally.

Restoring Files1. In the event you need to copy les from the backup drive to the original source

device (to replace lost or damaged originals, for example), select the items inthe right-hand (USB Device) window and click the Restore icon (2).


16/23

16

2. When the Are you going to restore? prompt displays, click OK.

3. When the Restore Finished! message displays, click OK. The selected items

will appear in the left-hand (File Backup) window.

Deleting Files1. Select a le (or les) you want to delete in the USB Device window.2. Right-click your mouse to display the Delete select les option. Select this

option, and all highlighted les will be removed.


17/23

17

OPTION:To remove all les that have been backed up, you can simply select theroot directory (FNet) folder, then right-click for the delete option.


18/23

18

SPECIFICATIONS

Standards and Certifcations

USB 2.0 USB 1.1

Complies with ATA/ATAOI-100 spec v1.0 standards SATA 1.0 FCC CE EuP WEEE

General USB 2.0 Standard-A male; SATA L-type male; IDE 40-pin; IDE 44-pin ports Hi-Speed USB transfer interface 480 Mbps maximum transfer rate

Supports SATA, enhanced-SATA, IDE and enhanced-IDE drivesPower Supply Input: 100 240 V AC; 50/60 Hz maximum 0.8 A Output: 12 V / 2 A Cable: 1.5 m (59 in.)

Physical 9.8 x 7 x 1.8 cm (3.8 x 2.75 x 0.7 in.) Cables: USB, 80 cm (31.5 in.); 4-pin power, 10 cm (4 in.) Weight: 270 g (9.5 oz.)

System Requirements Available USB type-A port Windows XP/Vista/7

Package Contents Hi-Speed USB to SATA/IDE Adapter Software CD with user manual; multilanguage quick install guide


19/23

19

WASTE ELECTRICAL & ELECTRONIC EQUIPMENTDisposal of Electric and Electronic Equipment

(applicable in the European Union and other European countries with separate collection systems)

ENGLISH

This symbol on the product or its packaging indicates that this product shall not betreated as household waste. Instead, it should be taken to an applicable collection

point for the recycling of electrical and electronic equipment. By ensuringthis product is disposed of correctly, you will help prevent potential negativeconsequences to the environment and human health, which could otherwisebe caused by inappropriate waste handling of this product. If your equipmentcontains easily removable batteries or accumulators, dispose of these

separately according to your local requirements. The recycling of materials willhelp to conserve natural resources. For more detailed information about recyclingof this product, contact your local city ofce, your household waste disposal service or

the shop where you purchased this product. In countries outside of the EU:If you wishto discard this product, contact your local authorities and ask for the correct mannerof disposal.

DEUTSCHDieses auf dem Produkt oder der Verpackung angebrachte Symbol zeigt an, dassdieses Produkt nicht mit dem Hausmll entsorgt werden darf. In bereinstimmungmit der Richtlinie 2002/96/EG des Europischen Parlaments und des Rates berElektro- und Elektronik-Altgerte (WEEE) darf dieses Elektrogert nicht im normalenHausmll oder dem Gelben Sack entsorgt werden. Wenn Sie dieses Produkt entsorgenmchten, bringen Sie es bitte zur Verkaufsstelle zurck oder zum Recycling-

Sammelpunkt Ihrer Gemeinde.

ESPAOLEste smbolo en el producto o su embalaje indica que el producto no debe tratarsecomo residuo domstico. De conformidad con la Directiva 2002/96/CE de la UE sobre residuos de aparatos elctricos y electrnicos (RAEE), este producto elctrico nopuede desecharse con el resto de residuos no clasicados. Deshgase de esteproducto devolvindolo a su punto de venta o a un punto de recoleccin municipalpara su reciclaje.

FRANAISCe symbole sur Ie produit ou son emballage signie que ce produit ne doitpas tretrait comme un dchet mnager. Conformment la Directive 2002/96/EC sur lesdchets dquipements lectriques et lectroniques (DEEE), ce produit lectrique nedoit en aucun cas tre mis au rebut sous forme de dchet municipal non tri.Veuillez vous dbarrasser de ce produit en Ie renvoyant son point de vente ou aupoint de ramassage local dans votre municipalit, des ns de recyclage.


20/23

20

ITALIANOQuesto simbolo sui prodotto o sulla relativa confezione indica che il prodotto nonva trattato come un riuto domestico. In ottemperanza alla Direttiva UE 2002/96/ECsui riuti di apparecchiature elettriche ed elettroniche (RAEE), questa prodottoelettrico non deve essere smaltito come riuto municipale misto. Si prega di smaltire

il prodotto riportandolo al punto vendita o al punto di raccolta municipale locale perun opportuno riciclaggio.

POLSKIJeli na produkcie lub jego opakowaniu umieszczono ten symbol, wwczas w czasieutylizacji nie wolno wyrzuca tego produktu wraz z odpadami komunalnymi. Zgodnie zDyrektyw Nr 2002/96/WE w sprawie zuytego sprztu elektrycznego i elektronicznego(WEEE), niniejszego produktu elektrycznego nie wolno usuwa jako nie posortowanegoodpadu komunalnego. Prosimy o usuniecie niniejszego produktu poprzez jegozwrot do punktu zakupu lub oddanie do miejscowego komunalnego punktu zbirkiodpadw przeznaczonych do recyklingu.


21/23

21

WARRANTY INFORMATION

ENGLISH: For warranty information, go to manhattan-products.com/warranty.DEUTSCH: Garantieinformationen nden Sie unter manhattan-products.com/warranty.ESPAOL: Si desea obtener informacin sobre la garanta, visite manhattan-products.com/

warranty.FRANAIS: Pour consulter les informations sur la garantie, visitez manhattan-products.com/warranty.

POLSKI: Informacje dotyczce gwarancji znajduj si na stronie manhattan-products.com/warranty.

ITALIANO: Per informazioni sulla garanzia, accedere a manhattan-products.com/warranty.EN MXICO: Pliza de Garanta MANHATTAN Datos del importador y responsableante el consumidor IC Intracom Mxico, S.A. de C.V. Av. Interceptor Poniente # 73, Col.Parque Industrial La Joya, Cuautitln Izcalli, Estado de Mxico, C.P. 54730, Mxico. Tel. (55)1500-4500

La presente garanta cubre los siguientes productos contra cualquier defecto defabricacin en sus materiales y mano de obra.A. Garantizamos los productos de limpieza, aire comprimido y consumibles, por 60 dias

a partir de la fecha de entrega, o por el tiempo en que se agote totalmente sucontenido por su propia funcin de uso, lo que suceda primero.

B. Garantizamos los productos con partes mviles por 3 aos.C. Garantizamos los dems productos por 5 aos (productos sin partes mviles),

bajo las siguientes condiciones: 1. Todos los productos a que se reere esta garanta, ampara su cambio fsico,

sin ningn cargo para el consumidor. 2. El comercializador no tiene talleres de servicio, debido a que los productos

que se garantizan no cuentan con reparaciones, ni refacciones, ya que sugaranta es de cambio fsico.

3. La garanta cubre exclusivamente aquellas partes, equipos o sub-ensamblesque hayan sido instaladas de fbrica y no incluye en ningn caso el equipoadicional o cualesquiera que hayan sido adicionados al mismo por el usuarioo distribuidor.

Para hacer efectiva esta garanta bastar con presentar el producto al distribuidoren el domicilio donde fue adquirido o en el domicilio de IC Intracom Mxico, S.A. deC.V., junto con los accesorios contenidos en su empaque, acompaado de supliza debidamente llenada y sellada por la casa vendedora (indispensable el sello

y fecha de compra) donde lo adquiri, o bien, la factura o ticket de compra originaldonde se mencione claramente el modelo, nmero de serie (cuando aplique) yfecha de adquisicin. Esta garanta no es vlida en los siguientes casos: Si elproducto se hubiese utilizado en condiciones distintas a las normales; si el productono ha sido operado conforme a los instructivos de uso; o si el producto ha sidoalterado o tratado de ser reparado por el consumidor o terceras personas.


22/23

22

REGULATORY STATEMENTS

FCC Class BThis equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of Federal Communications Commission (FCC)

Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and canradiate radio frequency energy, and if not installed and used in accordance with theinstructions may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from the receiver. Consult the dealer or an experienced radio/TV technician for help.

CE / R&TTE

ENGLISH

This device complies with the requirements of R&TTE Directive 1999/5/EC.

DEUTSCH

Dieses Gert enspricht der Direktive R&TTE Direktive 1999/5/EC.

ESPAOLEste dispositivo cumple con los requerimientos de la Directiva R&TTE 1999/5/EC.

FRANAISCet appareil satisfait aux exigences de la directive R&TTE 1999/5/CE.

POLSKI

Urzdzenie spenia wymagania dyrektywy R&TTE 1999/5/EC.

ITALIANO

Questo dispositivo conforme alla Direttiva 1999/5/EC R&TTE.


23/23

Copyright MANHATTAN

179195 08 Manual Usb Manhattan

Documents

Transcript of 179195 08 Manual Usb Manhattan