16RCD-0017The PRCD 3016 is a key component during Managed Pressure Drilling (MPD) and Under Balanced...
Transcript of 16RCD-0017The PRCD 3016 is a key component during Managed Pressure Drilling (MPD) and Under Balanced...
The PRCD 3016 is a key component during Managed Pressure Drilling (MPD) and Under Balanced Drilling (UBD) operations. The PRCD 3016 forms a passive (wellbore assisted) seal on the drill string and provides the ability to contain pres-sure within the wellbore while performing normal drilling operations.
With a static pressure rating of 3000 PSI and an aggressive dynamic rating, the PRCD 3016 provides the necessary range required for MPD/UBD operations employed in the drilling of today's unconventional wells.
The PRCD 3016 comes equipped with the Pruitt Automated Power Unit and Clamp Operating Stand. The Automated Power Unit is designed as a positive pressure system that ensures all fluids and contaminants remain within the well-bore. Lubrication is also provided to prolong seal life and provides temperature control for the internal components of the RCD.
PRCD 3016 IN HIGH PRESSURE BOWL WITH HYDRAULIC CLAMP. SHOWN WITH 13-5/8”-5M MOUNTING FLANGE AND 7-1/16”-5M STUD-DED OUTLET.
PRCD 3016 SPECIFICATION SHEET
API License #: 16RCD-0017
API MONOGRAMMED RCD
Managed Pressure Drilling
Under Balanced Drilling
APPLICATIONS
API End Connection Flange
API Outlet Blind Flange
Dual Outlets
AVAILABLE OPTIONS
PRCD 3016 SPECIFICATIONS
MAXIMUM TESTED RPMMAXIMUM STATIC RATING psi [bar]MAXIMUM DYNAMIC RATING psi [bar]PASS THRU DIAMETER WITH BEARING inch [mm]PASS THRU DIAMETER WITHOUT BEARING inch [mm]
SINGLE/DUAL ELEMENT SINGLE200
3000 [206.8]
2000 [137.9]7.0 [177.8]
13.625 [346.1]
16RCD-0017
www.pruitt.com
0317
PRCD 3016 SPECIFICATION SHEET
CONTACT INFORMATION
[email protected] Aire Circle Fort Smith, AR USA 72916
www.pruitt.com
18.0” 17.0”
43.2”50.1”
15.3”
.13”
19.9”
26.5”11.5” 12.8”
NOTES CENTER OFGRAVITY - 5,000 LBS
CHEMICAL COMPATIBILITY TABLE
PACKING RUBBER
ROTARY SEALS
BEARING ASSEMBLYO-RINGS
RCDCOMPONENT
DRILLPIPE SIZE(TOOL JOINT SIZE)
TEMPERATURERATING
OIL
BA
SE M
UD
WAT
ER B
ASE
MU
D
H2S
CO2
NAT
URA
L G
AS
WAT
ER B
ASE
AM
INE
BOWL GASKET
4-1/2 in(6-6.625 in)
4-1/2 in(6-6.625 in)
4-1/2 in(6-6.625 in)
4-1/2 in(6-6.625 in)
40 to 180°F
40 to 180°F
40 to 180°F
40 to 180°F
Y Y Y Y Y Y
Y Y Y Y Y Y
Y Y Y Y Y Y
Y Y Y Y Y Y