16.0_ConfCADInt
-
Upload
shyam-radsun -
Category
Documents
-
view
6 -
download
0
description
Transcript of 16.0_ConfCADInt
![Page 1: 16.0_ConfCADInt](https://reader036.fdocuments.in/reader036/viewer/2022062408/563dbb0f550346aa9aa9eeb6/html5/thumbnails/1.jpg)
© 2013 ANSYS, Inc. 1
Configuring CAD Products in v16.0.
Global Support Installation
![Page 2: 16.0_ConfCADInt](https://reader036.fdocuments.in/reader036/viewer/2022062408/563dbb0f550346aa9aa9eeb6/html5/thumbnails/2.jpg)
© 2013 ANSYS, Inc. 2
What will you learn from this presentation:
• What options should I pick during the Installation? • How to configure CAD Interfaces during the Installation • How to (re)configure CAD Interfaces after the Installation has
taken place.
Configuring CAD Products in v16.0.
![Page 3: 16.0_ConfCADInt](https://reader036.fdocuments.in/reader036/viewer/2022062408/563dbb0f550346aa9aa9eeb6/html5/thumbnails/3.jpg)
© 2013 ANSYS, Inc. 3
• Please note that this slide deck uses the Creo Reader and Associative Interface to demonstrate how to Configure CAD readers and Interfaces to work with ANSYS Inc Products.
• The other Readers and Associative Interfaces are configured in a very similar way and so you should be able to follow the same general workflow for each.
Note on examples contained with this presentation
![Page 4: 16.0_ConfCADInt](https://reader036.fdocuments.in/reader036/viewer/2022062408/563dbb0f550346aa9aa9eeb6/html5/thumbnails/4.jpg)
© 2013 ANSYS, Inc. 4
What options should I pick during the Installation?
![Page 5: 16.0_ConfCADInt](https://reader036.fdocuments.in/reader036/viewer/2022062408/563dbb0f550346aa9aa9eeb6/html5/thumbnails/5.jpg)
© 2013 ANSYS, Inc. 5
• During the Installation you are given the option of which CAD Packages to Install.
• Make sure the ones you require are selected.
• Most of these options are small in terms of size and so the recommendation is to leave them selected. • This means you can configure them
later without needing to re-run the installer.
Make sure you install the CAD Packages during Installation
![Page 6: 16.0_ConfCADInt](https://reader036.fdocuments.in/reader036/viewer/2022062408/563dbb0f550346aa9aa9eeb6/html5/thumbnails/6.jpg)
© 2013 ANSYS, Inc. 6
Configuring CAD Products During the Installation Process
![Page 7: 16.0_ConfCADInt](https://reader036.fdocuments.in/reader036/viewer/2022062408/563dbb0f550346aa9aa9eeb6/html5/thumbnails/7.jpg)
© 2013 ANSYS, Inc. 7
• During the Installation Process you will get options for the CAD packages that you have selected.
• The example on the right shows the Creo Parametric.
• You can Pick either the Reader or Workbench Associative Interface options.
• Alternatively If you do not want to configure at this time then click “Skip this step for Workbench and Configure Later”.
• All the other CAD Products are similar in the Installation Process.
Installation Process
![Page 8: 16.0_ConfCADInt](https://reader036.fdocuments.in/reader036/viewer/2022062408/563dbb0f550346aa9aa9eeb6/html5/thumbnails/8.jpg)
© 2013 ANSYS, Inc. 8
Post Install Configuration through the CAD Configuration Utility
![Page 9: 16.0_ConfCADInt](https://reader036.fdocuments.in/reader036/viewer/2022062408/563dbb0f550346aa9aa9eeb6/html5/thumbnails/9.jpg)
© 2013 ANSYS, Inc. 9
• Start to CAD Configuration Manager from
Start Menu -> All Programs -> ANSYS 15.0
• Make sure you start the program by right clicking and selecting “Run as administrator”
Starting the CAD Configuration Manager
![Page 10: 16.0_ConfCADInt](https://reader036.fdocuments.in/reader036/viewer/2022062408/563dbb0f550346aa9aa9eeb6/html5/thumbnails/10.jpg)
© 2013 ANSYS, Inc. 10
1. In ‘CAD Products’ : select « Creo Parametric / Reader »
2. Click Next
3. Click on Configure Selected CAD Interfaces
4. Check every line has the status « Configure Success ».
5. Click « Exit » to close the CAD Configuration Manager
Example – Installing a Reader
![Page 11: 16.0_ConfCADInt](https://reader036.fdocuments.in/reader036/viewer/2022062408/563dbb0f550346aa9aa9eeb6/html5/thumbnails/11.jpg)
© 2013 ANSYS, Inc. 11
1. In ‘CAD Products’ : select « Creo Parametric / Workbench Associative Interface »
2. Click Next
3. Indicate Creo Parametric installation folders
4. Click Next
Example - Installing the Plug in Interface (1/2)
![Page 12: 16.0_ConfCADInt](https://reader036.fdocuments.in/reader036/viewer/2022062408/563dbb0f550346aa9aa9eeb6/html5/thumbnails/12.jpg)
© 2013 ANSYS, Inc. 12
1. Click on Configure Selected CAD Interfaces
2. Check every line has the status « Configure Success ».
3. Click « Exit » to close the CAD Configuration Manager
Example - Installing the Plug in Interface(2/2)