15 TANKS & OIL FILTERS (Réservoirs et filtres à huile)2011

All part numbers in BOLD MAGENTA are new for 2011.

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

925

WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLHT/ FLHTC/FLHTCU/FLHX/FLTR/H-D FL TRIKE MODELS0701-0526 08-11 style fuel-injected gas tank (20”) $1,269.950701-0527 08-11 style fuel-injected gas tank (171/2”) 1,269.95FOR 96-07 FLHT/FLHX/FLTR MODELS0701-0126 03-07 style fuel-injected gas tank (201/2”) 1,186.950701-0127 96-06 style carb gas tank (201/2”) 1,229.950701-0318 03-07 style fuel-injected gas tank (171/2”) 1,186.90

PART # DESCRIPTION SUG. RETAILFOR 96-07 FLHT/FLHX/FLTR MODELS (CONT)0701-0319 96-06 style carb gas tank (171/2”) $1,229.95FOR 96-07 FLHR MODELS0701-0189 03-07 style fuel-injected gas tank (201/2”) 1,229.950701-0190 96-06 style carb gas tank (201/2”) 1,229.950701-0320 03-07 style fuel-injected gas tank (171/2”) 1,229.950701-0321 96-06 style carb gas tank (171/2”) 1,229.95

GAS TANKS FOR DRESSERS•Now available in 171/2”, 20” or 201/2” widths•One-piece tanks feature a 3” stretch•Curved bottom for a custom look•Includes a raw dash panel that replaces the existing dash•Factory sealed powder coat primer on the inside of tanks•Accept L96-11 vented gas caps (sold separately); 03-11 style fuel-injected tanks accepts the stock OEM fuel-pump assembly

•96-06 style carb tanks include a filler plate/neck assembly•Tanks have an approximate 6-gallon capacity•Tanks fit with RWD Profile (PART #0804-0247), ProTour (PART #0804-0248) and LoPro (PART #0801-0508) seats, sold separately, see page 161

•Made in the U.S.A.

NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending unit.

0701-0527

0701-0126

0701-0126 Side profile

0701-0190


0701-0127

0701-0190

1914-0009

PART # DESCRIPTION SUG. RETAILCUSTOM TANKS FOR 00-06 SOFTAIL1914-00091 211/4” L x 151/2” W, (approx. 4.5 gal.) $799.950701-04361 231/2” L x 171/4” W, (approx. 5.5 gal.) 999.95CHOPPER-STYLE TANKS0701-0110 Short, curved bottom, 233/4” L x 121/2” W 953.95UNIVERSAL TANKS0701-0114 5” tear-drop, std. mount 28” L x 16” W 868.950701-0115 5” tear-drop, recessed mount 25” L x 16” W 1,129.95

PART # DESCRIPTION SUG. RETAILUNIVERSAL TANKS (CONT)0701-0117 5” tear-drop narrow, recessed mount 25” L x 14” W $1,129.95TANK MOUNTS0704-0001 Frame mount kit 39.950704-0002 Recessed mount kit 71.951 Requires the relocation of gauges, indicator lights and ignition switch;

FXSTD will require the use of a custom seat.

SMOOTH-TOP GAS TANKS•Custom tanks for custom builders•One-piece, single-cap design•Smooth top eliminates the dash completely•Handcrafted from 14- and 16-gauge steel•Requires the use of an L96-11 vented gas cap and 22mm petcock•Required mount kits may be used on any custom application•Made in the U.S.A.

NOTE: Not for use on fuel-injected models.

0701-0114 SIde profile

0701-0114

1914-00090701-0110


0704-0001 0704-0002


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

CUSTOM GAS TANKS•Narrow Mustang type features a single cap, two petcock outlets, straight mounting tabs and a hole-to-hole center line on mounting brackets of 171/2”

•Extra Wide Mustang type features a high tunnel for the “Fatbob” look, one left side petcock outlet and a hole-to-hole center line on mounting brackets of 1711/16”

•1-Piece Fatbob style features a left side external petcock outlet, indent on tank bottom for rocker box clearance and a hole-to-hole center line on mounting brackets of 193/4”

•Dished tank style features a bung for cam-style gas cap, a bung for late-model 22mm petcock and a hole-to-hole center line on mounting brackets of 163/4”


NOTE: Not for use on fuel-injected models.

NOTE: Paughco recommends all tanks be mounted on leather spacers or bushings.

NOTE: All tanks are pressure-tested and are bare metal; fit before painting.

926


ONE-PIECE 2.5” EXTENDED GAS TANKS•Powder-coated on the inside to form a complete seal

•Uses stock dash•Includes fuel gauge bung and filler bung•Accepts any L96-11 vented aftermarket cap•A new seat or seat nose modification is required•Measures 231/2” L x 171/4” H x 9” H (approximately 5.5 gal.)•Made in the U.S.A.

NOTE: Mounting hardware not included.

PART # DESCRIPTION SUG. RETAILFOR 01-10 SOFTAIL MODELS W/ FUEL INJECTION0701-0382 Gas tank kit (tank and cover, with “Gas It” kit) $1,761.95FOR 00-06 SOFTAIL W/ CARB0701-0381 Gas tank kit (tank and cover) 1,199.95

PART # DESCRIPTION SUG. RETAILFOR 00-06 SOFTAIL W/ CARB (CONT)0701-0315 Gas tank only $1,099.950502-0256 Backbone cover only 246.95

VINTAGE GAS TANKS•Add a period-style bobber tank to your Softail•Steel gas tank inspired by the Softail conversion Roland Sands Designs created and dubbed El Borracho•Available for carbureted or fuel-injected models•Fuel-injected tank includes RSD “Gas It” fuel injection kit that installs with simple hand tools and no fabrication is required•Tanks rest on a clever steel backbone cover that hides the OEM wiring and holds stock ignition switch to deliver a clean look•Holds three gallons of fuel•Roland Sands Design gas caps sold separately; see page 934•Matching seat kit, rear fender kit and handlebars also sold separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0701-0434 For 01-07 Softail models w/ fuel injection $999.950701-0435 For 00-06 Softail models w/ carb 999.95

PART # DESCRIPTION SUG. RETAILNARROW MUSTANG TYPE (161/2” L X 9” W X 7” D; TUNNEL MEASURES 21/2” W X 21/4” D)0701-0183 2.2 gal. tank $171.95EXTRA WIDE MUSTANG TYPE (161/2” L X 12” W X 7” D; TUNNEL MEASURES 21/2” W X 5” D)0701-0184 3 gal. tank 171.951-PIECE FATBOB STYLE (191/2” L X 13” W X 8” D; TUNNEL MEASURES 23/16” W X 41/4” D)0701-01851 4.75 gal. tank 186.95DISHED STYLE (16” L X 10” W X 9” D; TUNNEL MEASURES 3” W X 21/2” D)0701-0523 3 gal. tank 362.951 Will not work on any stock FXR or FLT.

0701-0434

0701-0382

0701-0381

“Gas It” fuel injection kit

0701-0315

0502-0256

0701-0183

0701-01840701-0185

0701-0523


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

927


PART # DESCRIPTION SUG. RETAILFOR 01-06 FXST, FLST W/ FUEL INJECTION AND 04-06 FXST, FLST W/ CARB (EXCEPT FXSTD)1914-18611 Dash style w/ fuel gauge bung,

single screw-in cap $389.950701-01671, 2 2” extended w/ one screw bung and dummy

bung for OEM gas gauge 359.951914-18631 2” extended dash style, dual screw-in caps 439.951914-18641 2” extended dash stye with fuel gauge bung,

single screw-in cap 439.95

PART # DESCRIPTION SUG. RETAILFOR 00-03 FXST, FLST W/ CARB (EXCEPT FXSTD)1914-1813 Dash stye w/ fuel gauge bung, screw-in cap $369.951914-1814 2” extended dash style w/ fuel gauge bung,

single screw-in cap 419.951 Requires the use of petcock adapter OEM #62842-00 or Drag

PART #0705-0024 when used in listed carb applications.2 Will not fit EFI models.

ONE-PIECE TANKS•5.1-gallon tank is made from 16-gauge stamped steel•Available in standard or 2” extended length•Dash-style tank has mounting provisions for stock-style dash and ignition switch (not included)•Tank with fuel gauge bungs accepts OEM-style or aftermarket fuel gauges•Aero tank includes gas caps; screw-in cap tank requires the use of 82-E96 gas caps (sold separately)

NOTE: Seat nose may require modification to fit properly with extended tanks. Some models may require sending unit modification.

MUSTANG GAS TANKS•Fat Bob-style, low-tunnel tank holds approximately 3.3 gallons•Features a 3/8” NPT-style petcock mount with two 1/4” NPT crossover fittings•Available as a single- or dual-cap design•Accept 73-81 style gas caps•Measures 193/4” L (including mounting tabs) x 111/2” W x 71/2” H (approximately)

NOTE: Not for use on fuel-injected models.PART # DESCRIPTION SUG. RETAIL0701-0001 W/ single cap $99.950701-0010 W/ dual cap 107.95

PART # DESCRIPTION SUG. RETAILSMOOTH-TOP STYLE TANKS FOR 84-99 FXST, FLSTDS-390071 With single screw-in cap $354.95

PART # DESCRIPTION SUG. RETAILSMOOTH-TOP STYLE TANKS FOR 84-99 FXST, FLST (CONT)DS-390392 With single Aero cap $449.95

ONE-PIECE EXTENDED GAS TANKS•Smooth-top tanks eliminate the dash completely and will require custom mounting of ignition switch, dash lights and speedometer•Tank measures 221/2” L by 16” W•Aero caps are included with tank; screw-in caps are not included and must be purchased separately (use 82-E96 style caps)•Includes all necessary hardware

NOTE: 96-99 models require the use of pre-96 petcock.

0701-0167Side profile

1914-1863 Side profile 1914-1813 Side profile

DS-390071 Side profile

DS-390071

DS-390392

0701-01671914-1863

1914-1813

0701-0001

0701-0010


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

928


ONE-PIECE 2" EXTENDED GAS TANKS•Gas tanks are fully functional; no dummy extensions•2" stretch over stock length; capacity is approximately 4.2 gallons•Available in a smooth-top style for use with standard screw-in caps or with locking aero cap•Aero cap included; screw-in gas caps sold separately (use 84-E96 style)•Smooth top tanks require custom gauge mounting•Accept late-style petcock (22mm)•Come complete with all necessary mounting hardware

NOTE: Seat nose may require modification.

PART # DESCRIPTION SUG. RETAIL2" EXTENDED TANKS FOR 84-99 FXST, FLST, 85-86 FXWG AND FXSBDS-391291 5.2-gal. tank for use w/ dual screw-in caps $349.95DS-390391 5.2-gal. tank w/ Aero locking caps 499.95

EXTENDED TWO-PIECE FLAT-SIDE GAS TANKS•2" extended tanks are fully functional; no dummy extensions welded to rear of tank•4" extensions comprised of fully functional 2" extended tanks with additional 2" dummy extensions welded to the rear of the gas tanks•Tanks come in a raw finish and accept stock-style speedometer and dash•Contoured to fit around the nose of most seats (some seats may require modification)•Available in 5.2-gallon style for use with standard screw-in caps•Aero caps are included with tank•Screw-in caps are sold separately (use 84-E96 style)•Sold as a set

NOTE: 96-99 models require pre-95 screw-in gas caps and petcock.

NOTE: See SEATS & SISSY BARS section for custom seats and seat pans to fit with extended tanks.

PART # DESCRIPTION SUG. RETAIL4" EXTENDED TANK FOR 84-99 FXST, FLST, 85-86 FXWG AND FXSBDS-391331 5.2-gal. tank for use w/ dual screw-in caps $419.95

PART # DESCRIPTION SUG. RETAILTANKS FOR USE WITH 84-E96 SCREW-IN GAS CAPS (SOLD SEPARATELY) FOR 84-99 FXST, FLST, 85-86 FX/FXWGDS-391237 3.5-gal. Flatside tank; repl. OEM #s 61218-85 (right side) and 61426-85 (left side) $229.95DS-391238 5-gal. Flatside tank; repl. OEM #s 61211-84A (right side) and 61228-84 (left side) 229.95DS-391234 6-gal. Flatside tank 219.95

FAT BOB-STYLE GAS TANKS•Distinctive reproduction gas tanks constructed of drawn steel•Manufactured to exact OEM specifications

NOTE: Stock dash may need to be shimmed.

NOTE: 96-99 models require the use of pre-95 gas caps and petcock.

PART # DESCRIPTION SUG. RETAILFOR 84-94, 99-00 FXR2107-1737 Single locking Aero cap $439.95DS-391335 Dual screw-in caps 357.95

2107-1737Side profile

DS-391291Side profile



2107-1737

DS-391335

DS-391291 DS-390391 DS-391331

DS-391238DS-391237Side profile



WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

929

FATBOB GAS TANKS•4.2 gallon tank bolts to stock frame•Comes with mounting kit and hose line fittings•PART #0701-0186 features a left side rear external outlet for stock petcock; PART #0701-0187 features a left side center external outlet for stock petcock

•Measures 191/4" L x 141/2" W x 8" D; hole-to-hole center line on mounting brackets measures 145/8"


NOTE: Paughco recommends all tanks be mounted on leather spacers or bushings.

NOTE: All tanks are pressure-tested and are bare metal; fit before painting.

EXTENDED DASH-STYLE RUBBER-MOUNT QUICKBOB® TANK KITS•Fully functional extended design, 2” longer than a standard Quickbob tank•Allows the lines of the tank to flow into the lines of the seat for a great custom look•Tanks have cutout in rear for seat nose (some seats may need to be modified)•95-03 tank kit includes a three-light dash for use with the OEM electronic speedo (except customs), 6-post Fat Bob ignition switch, ignition switch relocation bracket, coil bracket and screw-in gas caps

•86-94 tank kit includes a three-light dash, dash base, 2:1 ratio speedo with trip reset (68-84 style face), rubber dampener, a 6-post Fat Bob ignition switch and screw-in gas caps

•All tanks come with necessary mounting brackets•3.9-gallon fuel capacity•Utilizes a 22mm petcock

EXTENDED SMOOTH-TOP QUICKBOB® RUBBER-MOUNT GAS TANKS•Extended design of these tanks allows the lines of the tank to flow into the lines of the seat for a great custom look•2" longer than a standard QuickBob tank•Available in a single- or dual-gas cap style•Tanks have cutout in rear for seat nose (some seats may need to be shortened)•86-03 tanks feature screw-in bungs (use 82-E96 style caps)•3.9-gallon capacity•Utilize a 22mm petcock•Each tank comes with necessary mounting brackets

NOTE: When gas tanks are installed on 92 and later models and the OEM continuous venting system is eliminated or disconnected, you may not reuse your stock vented cap, but may replace it with an earlier version of the screw-type caps.

NOTE: Will not fit 1200S models.


PART # DESCRIPTION SUG. RETAILFOR 86-03 XL MODELS (REQUIRES PART #DS-390077 IGNITION COIL RELOCATION KIT; SOLD SEPARATELY)DS-391351 Twin-cap style gas tank $381.95DS-391352 Single-cap style gas tank 381.95DS-390077 Ignition relocation kit 22.95

PART # DESCRIPTION SUG. RETAILDS-391348 For 95-03 XL models (except 1200S model) $536.95DS-391322 For 86-94 XL models 579.95

PART # DESCRIPTION SUG. RETAIL0701-0187 For 95-03 XL models $412.950701-0186 For 86-94 XL models 412.95

0701-0187


DS-391322

DS-391351

DS-391352 DS-390077


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

930


EXTENDED SMOOTH-TOP GAS TANK•Higher-capacity (approximately 4-gallon) 2" extended tanks•Mounts to stock location; requires use of a custom seat to match rear tank cut-out•Accepts a 22mm petcock and late-style screw-in cap (sold separately)

NOTE: Will require a custom seat; stock seat will not fit.

RUBBER-MOUNT QUICKBOB® GAS TANKS•One-piece 3.6-gallon replicas of the Harley Fat Bob tanks•Available with a complete dash assembly or in a smooth-top design•Each style tank comes with rubber mount brackets and hardware•Speedometer not included, but any of the FL-style speedos (except DS-243870) may be used with DS-391273 tank on 86-94 models only•When ordering speedo, be sure to match existing speedo ratio with the one you're ordering•PART #DS-391284 mount kit with dash allows the use of the OEM electronic speedometer on 95-03 models (except customs); also includes coil and ignition switch relocation brackets (PART #DS-391273 tank only)

NOTE: When this gas tank is installed on 92 and later models and the OEM continuous venting system is eliminated or disconnected, you may not reuse your stock vented cap, but may replace it with an 84-E96 version of the screw-type caps.

NOTE: Will not fit 1200S models.

PART # DESCRIPTION SUG. RETAILFOR 86-03 XL MODELSDS-390396 Smooth-top w/ Aero cap $429.95DS-391272 Smooth-top for use w/ screw-in caps 341.95DS-391273 Dash style for use w/ screw-in caps

(requires PART #DS-391284 for mounting on 95-03 models) 399.95DS-391284 Dash kit for 95-03 OEM electric speedo 91.95DS-391285 Repl. rubber mounting kit for 86-03 49.95

GAS TANKS WITH CHROME AERO-STYLE GAS CAP•Rubber-mounted bolt-on style flat-bottom tank is made from heavy-gauge steel•Reinforced seams and extra-strong mounting tabs•”High-tunnel” design adds fuel capacity without looking tall; 3.3-gallon capacity•Features a chrome aero-style locking gas cap with keys•Accepts a 22mm petcock, sold separately

NOTE: May require seat nose modification and relocation of ignition switch on some models.

GAS TANKS•Bolt-on gas tanks for XL models are made of heavy-gauge steel with reinforced seams

•Come complete with extra-strong mounting tabs•2.9-gallon tanks are 2" wider than stock tanks•3.3-gallon tanks have "high-tunnel" design so they add fuel capacity without looking "tall"

•3.3-gallon tanks may require seat nose modifications•PART #DS-391220 uses a 3/8" NPT petcock, all others use 22mm; petcocks sold separately later in this section

NOTE: When this gas tank is installed on 92 and later models and the Original Equipment continuous venting system is eliminated or disconnected, you may not reuse your stock vented cap, but may replace it with an earlier version of the screw-type caps.

NOTE: 86-94 tanks have petcocks on the right side, 95-03 tanks have petcock on left side.

PART # DESCRIPTION SUG. RETAILDS-391226 2.9-gallon rubber mount tank for 95-03 XL $169.95DS-391225 2.25-gallon rubber mount tank for 95-03 XL 149.95

PART # DESCRIPTION SUG. RETAILDS-391224 2.25-gallon rubber mount tank for 86-94 XL $149.95DS-391223 2.9-gallon rubber mount tank for 86-94 XL 169.95

PART # DESCRIPTIONSUG.

RETAILDS-390340 For 86-94 XL (right-side petcock) $236.950701-0437 For 95-03 XL (left-side petcock 234.90

PART # DESCRIPTION SUG. RETAIL0701-0098 For 04-06 XL $335.95

DS-390396 DS-391272

DS-391273

DS-391284

DS-391285



DS-390340

DS-391224

0701-0437



WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

931


ABREW FABRICATIONS WELD-ON GAS TANK EXTENSIONS•Economical way to get the look of stretched gas tanks•Curved to match the tank’s natural curves•Do not increase gas tank capacity•Extension for 84-99 flat-side tanks requires a shortened seat nose•For custom dashes that fit these extensions, see DASHES & GAUGES section•Made in the U.S.A.

NOTE: Installation is recommended by experienced professionals only. If tanks have a sealer in them, installation will cause the sealer to peel from tank. Remember to pressure-check tanks before resealing and painting.PART # DESCRIPTION SUG. RETAILDS-391253 3" for 31/2-gallon 84-99 flat-side tanks $163.95DS-391254 3" for 5-gallon 84-99 flat-side tanks 163.950701-0095 6" for all 5-gallon flat side tanks 183.95

PART # DESCRIPTION SUG. RETAIL0701-0096 6" for 00-07 Softail (except Deuce) $183.950701-0097 6" for 93-07 FL 183.95

PART # DESCRIPTION SUG. RETAIL0704-0009 Weld-on gas/oil tank mount kit $24.95

WELD-ON GAS/OIL TANK TABS•Laser-cut 1/4" steel tabs are a great way to mount a custom gas or oil tank

•Kit includes two steel tabs and four rubber grommets•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-391301 For 84 FXST, FLST and all 85-99 models w/ split tanks $59.95

CUSTOM MOUNTING KIT FOR FLATSIDE TANKS•Kit includes mount brackets, rubber mounts, hose protector, chrome-plated beveled washers and mounting screws

•Can be used to update the stock mounting hardware or for new constructions

PART # DESCRIPTION SUG. RETAILDS-391357 For all 91-99 Softail models $14.95

CUSTOM BOLT KIT FOR FLAT SIDE TANKS•Chrome-plated hardware replaces front OEM gas tank mounting bolts

•Includes four 5/16-18 x 3/4" flathead Allen bolts with recessed washers

PART # DESCRIPTION SUG. RETAILDS-391300 For custom frame applications using flat-side gas tanks $65.95

FAT BOB-STYLE GAS TANK CONVERSION MOUNTS•Complete tank mount kit adapts new rubber-mounted flatside fuel tanks to 84 and earlier solid tank-mounted frames

•Two of the mounts bolt on; rear mount requires welding

•Include all mounting hardware, grommets and instructions


PART # DESCRIPTION SUG. RETAILACORN NUT-STYLE W/ STUD1913-3015 For 00-11 FXST/FLST models $11.951913-3016 For 84-99 FXST/FLST models 11.951913-3014 For 91-03 Dyna models 22.952401-0119 For 04-11 XL models 22.95

PART # DESCRIPTION SUG. RETAILACORN NUT-STYLE W/ STUD (CONT)1913-3007 For 96-03 XL models $35.95FLAT HEAD ALLEN-STYLE W/ COUNTERSUNK WASHERS1913-3006 For 98-11 FLT models 12.951913-3013 For 91-99 FXST/FLST models 12.95

GAS TANK MOUNTING HARDWARE KITS•Custom chrome-plated mounting kits•Available in acorn nut or flat head Allen styles•Made in the U.S.A.

1913-3015

1913-30161913-3014

2401-0119

1913-30061913-3013

1913-3007

DS-391253

0701-0095

0701-0096

0701-0097


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

932

PART # DESCRIPTION SUG. RETAILDS-391648 For most aftermarket FXST, FLST one-piece

tanks on 84-99 models $49.95

CUSTOM ONE-PIECE GAS TANK MOUNTING KIT•Kit includes front and rear tank mounts, rubber grommets and hardware PART # DESCRIPTION SUG. RETAIL

0705-0043 Weldless tank bung $41.95

WELDLESS TANK BUNG•Use when an alternative fuel source is needed, like when installing a nitrous oxide “wet” kit on fuel-injected motorcycles or as a fitting for an oil tank

•Requires a 9/16” hole for mounting; will work with any tank up to 5/8” wall thickness

•1/8” NPT internal thread size•CNC-machined from billet aluminum; includes a high-quality Viton O-ring for a positive seal, a stainless steel nut and washer and an 80 micron filter


PART # DESCRIPTION SUG. RETAIL3/8” NPT0705-0039 Steel $10.950705-0040 Aluminum 12.9522MM0705-0034 Steel 10.950705-0035 Aluminum 12.95

PETCOCK BUNGS•Weld-on tank bungs are available in 22mm male (stock on Harley-Davidson carbureted fuel tanks after 1975) or 3/8” NPT female (stock on pre-1975 Harley-Davidson fuel tanks)

•Designed to be welded directly to the fuel tank•Great for custom tanks or repairing stock tanks•Sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0521-0228 For 96-03 XL w/ stock fuel tank $42.95

FUEL TANK TAB TRIM•Add some sizzle to your Sportster’s fuel tank•Show-chromed mounting tabs feature chromed fasteners that securely hold the tank in place and look great doing it

•Sold in pairs

PART # DESCRIPTION SUG. RETAILDS-280458 Vented $7.95DS-280459 Non-vented 7.95

REPLACEMENT GAS TANK BUNGS•Weld-in style bungs used for custom-mounting filler hole in fuel tanks

•Accepts 84-E96 screw-in gas caps•Available in vented or non-vented styles

•Sold each

PART # DESCRIPTION SUG. RETAILDS-391241 For 84-99 Softail, 85-86 FX/FXWG w/ OEM gas

tanks and most aftermarket Fat Bob gas tanks; repl. OEM #11447 $1.95 (ea.)

FUEL TANK MOUNTING GROMMETS•Rubber mounting grommets from Genuine James Gaskets

•Sold in 12 packs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-391240 For 85-86 FX, FXWG and 84-99 Softail OEM gas

tanks and most aftermarket Fat Bob-style gas tanks; repl. OEM #11447 (grommet) and 5775 (sleeve) $1.95 (ea.)

GAS TANK GROMMETS•Rubber grommet with metal sleeve

•Sold each to consumer; sold to dealer in packs of 10

PART # DESCRIPTION SUG. RETAIL1913-3005 For 84-99 FXST/FLST, 85-86 FX/FXWG $9.95

FUEL TANK MOUNTING GROMMET KIT•Kit includes six rubber grommets and two steel sleeves

•One kit required for a set of tanks•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST, FLST, 85-86 FX, FXWG0704-0006 Polyurethane bushings only (10-pk.) $34.950704-0007 CNC-machined aluminum bushing inserts (6-pk.) 42.950704-0008 Aluminum bushing inserts and polyurethane

bushing combo (10-pk.) 79.95

PREMIUM FUEL TANK MOUNTING BUSHINGS•Gooden-Tight tank bushings•Injection-molded high-grade polyurethane with two-piece air-pocketed design

•Chemical-resistant, weather-proof, won’t crack, breakdown or damage sheet metal or paint

•Can be used to mount virtually anything that would normally be rubber mounted

•Two-piece busing design make for easy installation•Aluminum bushing i.d. is 5/16”•Made in the U.S.A.

DS-280459

0705-0039 0705-0040 0705-0034 0705-0035

DS-280458

0704-0006

0704-0007

0704-0008


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

933

CHROME SCREW-IN GAS CAPS•Feature a provision for evaporative emissions control equipment

•Available with or without a vent for 84-11 models; sold individually

SCREW-IN LOCKING GAS CAPS•Chrome locking cap discourages fuel theft and tampering

•Lock has a swing-away cover to keep dirt and debris out of the locking mechanism

•Come with two keys•Sold each

0703-0291 0703-0326

PART # DESCRIPTION SUG. RETAILFOR L96-11 MODELS (EXCEPT 04-11 XL)0703-0291 Vented, chrome $39.950703-0326 Vented, black wrinkle 39.950703-0292 Non-vented, chrome 39.950703-0327 Non-vented, black wrinkle 39.950703-0328 Dummy style; repl. fuel gauge, chrome 29.95FOR 84-E96 MODELS0703-0289 Vented, chrome 39.950703-0324 Vented, black wrinkle 39.950703-0325 Non-vented, black wrinkle 39.950703-0290 Non-vented, chrome 39.95

POP-UP GAS CAPS•Billet aluminum construction that is available in a polished chrome or black finish

•Fit is nearly flush when closed; opens easily with just a quarter-turn of the center of cap

•Styles available to fit early and late-model OEM gas tanks with screw-in style gas caps

•Sold each

PART # DESCRIPTION SUG. RETAILFOR L96-11 MODELS0703-0230 Vented $19.950703-0231 Non-vented 19.95FOR 84-E96 MODELS0703-0228 Vented 19.950703-0229 Non-vented 19.95

PART # DESCRIPTION SUG. RETAILFOR L96-11 MODELSDS-390281 W/ vent; repl. OEM #61272-92A $13.95DS-390282 W/o vent; repl. OEM #61103-83B 13.95FOR 84-E96 MODELSDS-390135 W/ vent; repl. OEM #61102-83A 13.95DS-390136 W/o vent; repl. OEM #61103-83B 13.95

0703-0228 0703-0229

DS-390135

PART # DESCRIPTION SUG. RETAILFOR L96-11 MODELS (EXCEPT 04-11 XL)0703-0304 Fuel level cap w/ LED warning light $109.950703-0293 Vented pop-up gas cap 44.95

POP-UP GAS FILLER AND FUEL LEVEL CAPS•Replace your stock cap and gas gauge with these sleek additions

•Left-side cap features a low-fuel LED warning light built in, push-in installation and wiring harness included

•User-programmable to light the LED at any pre-set fuel level•Fits all bikes with a left-side analog gas gauge•Matching right-side filler cap is vented and sized to match the left-side cap (sold separately)

•Caps fit nearly flush, and the filler cap opens easily with a quarter-turn of the cap center

•Chrome finish•Fuel level cap made in U.S.A. for Drag Specialties by Namz Custom Cycle Products

0703-0304 0703-0293

PART # DESCRIPTION SUG. RETAILFOR L96-11 H-D MODELS0703-0199 Vented, RH thread $59.950703-0200 Non-vented, LH thread 49.950703-0201 Dummy style, repl. fuel gauge 29.95

GAS CAPS WITH PAINT PROTECTORS•Chromed low-profile gas caps feature screw-in paint protectors and ratchet-action cap

•Available in vented, non-vented and dummy styles

•Vented cap has right-hand threads and can be used in either the right side of double-capped tanks or in single-cap tanks

•Non-vented cap has left-hand threads and is used only in the left side of double-capped tanks

•The dummy cap replaces the OEM fuel gauge in tanks that feature the fuel gauge in the left side; does not feature a fuel gauge

•Sold each; comes complete with installation tool for paint protector

0703-0199

0703-0200

0703-0201

PART # DESCRIPTION SUG. RETAILFOR L96-11 MODELS0703-0305 Fuel level cap w/ LED warning light $109.950703-0199 Vented Low Profile filler cap with

protector ring and ratchet cap 59.95

LOW PROFILE GAS FILLER AND FUEL LEVEL CAPS•Replace your stock cap and gas gauge with these sleek caps

•Left-side cap features a low-fuel LED warning light built in, push-in installation and wiring harness included

•User-programmable to light the LED at any pre-set fuel level•Fits all bikes with a left-side analog gas gauge•Matching right-side filler cap is vented and includes a screw-in paint protector ring and ratchet action cap (sold separately)

•Chrome finish•Fuel level cap made in U.S.A. for Drag Specialties by Namz Custom Cycle Products

0703-0305

0703-0199


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

PART # DESCRIPTION SUG. RETAILFOR L96-11 H-D MODELS0703-0162 Vintage, Contrast Cut™ $69.950703-0163 Vintage, Chrome 69.950703-0337 Cafe, Contrast Cut™ 69.950703-0338 Cafe, chrome 69.950703-0039 Cafe, Black Ops 69.950703-0340 Tech, Contrast Cut™ 69.950703-0341 Tech, chrome 69.95

PART # DESCRIPTION SUG. RETAILFOR L96-11 H-D MODELS (CONT)0703-0342 Tech, Black Ops $69.950703-0343 Gear Drive, Contrast Cut™ 69.950703-0344 Gear Drive, chrome 69.950703-0345 Gear Drive, Black Ops 69.950703-0346 Tracker, Contrast Cut™ 69.950703-0347 Tracker, chrome 69.950703-0348 Tracker, Black Ops 69.95

BILLET ALUMINUM GAS CAPS•Screw-in vented caps sport the Roland Sands Design logo•Available in chrome, Contrast Cut™ or Black Ops finish•Contrast Cut™ finish starts with a polished gas cap that has been black anodized then re-cut to open up the design•New Black Ops finish features a machined surface treated through a proprietary military spec process for strength and hardness, then further machined and anodized for a subtle yet striking black-on-black contrast that is scratch, weather and damage resistant; it’s the ultimate low maintenance finish

•Vintage design matches the Roland Sands Design Vintage gas tank kit, seat, seat kit, fender kit and handlebars•Made in the U.S.A.

934

PART # DESCRIPTION SUG. RETAILDS-390118 W/ vent $12.95DS-390119 W/o vent 12.95

DELUXE GAS CAPS•One-piece, die-cast gas caps are completely chrome-finished and feature Nytrel/cork seals

•Vented version has a check ball valve to prevent leakage

•Both caps fit any tank using pre-82, early-type twist-on gas caps (will not fit screw-in type tanks)

PART # DESCRIPTION SUG. RETAILFOR ALL 84-E96 MODELSDS-390134 Chrome vented cap $18.95DS-390137 Chrome nonvented cap 18.95DS-390147 Chrome w/ gold insignia vented cap 27.95DS-390148 Chrome w/ gold insignia nonvented cap 27.95

“LIVE TO RIDE” GAS CAPS•Complete thread-in gas caps feature the Live To Ride insignia•3” diameter available in chrome or chrome with a gold insignia•Sold individually

PART # DESCRIPTION SUG. RETAIL1914-1525 120mm vented (ea.) $71.951914-1526 95mm vented (ea.) 64.95

AERO GAS CAPS•Replacement gas caps for Drag Specialties gas tanks that accept Aero caps

•Include keys, gasket and bolts

PART # DESCRIPTION SUG. RETAILDS-390079 Gas cap set (one vented, one non-vented) $59.95DS-390069 Vented gas cap (ea.) 30.95

FLUSH-MOUNT LOCKING CAPS•For use with Drag Specialties gas tanks that accept flush-mount gas caps

DS-390134

DS-390118

DS-390148

1914-1525

1914-1526

DS-390079 DS-390069

0703-0163

0703-0337

0703-03410703-0345 0703-0346

0703-0162


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

935

PART # DESCRIPTION SUG. RETAILWITH STEEL WELD-IN BUNG0703-0066 Classic, chrome $194.950703-0251 Classic, black 194.950703-0067 Hot Rod, chrome 194.950703-0203 Hot Rod, brass 229.950703-0252 Hot Rod, black 194.950703-0164 Flip-top, chrome 223.95

PART # DESCRIPTION SUG. RETAILWITH L96-11 OEM BUNG INSERT0703-0110 Classic, chrome $177.950703-0253 Classic, black 194.950703-0254 Hot Rod, black 194.950703-0165 OEM flip-top, chrome 238.95

GAS CAPS•A great replacement for your hard-to-remove stock gas cap•Made with finger serrations for a much easier removal over the stock smooth-sided gas cap

•Super-clean and low-profile design features all CNC-machined billet aluminum construction throughout

•After being tightened down the cap can rotate to any position to align design pattern

•Hard black anodized finish•High-quality gas cap base has right-hand threads and is vented•Dimensions: 3” diameter, 1/4” thick at the edge, and 9/16” thick in the center


GAS CAPS AND BUNGS•All styles are CNC machined from billet aluminum•Vented and non-vented caps available•Caps with HD-style bung adapter fit 84-E96 right-hand screw-in style tanks

•Caps with weld-in bungs are for custom applications•Bungs available separately for use with Covington gas caps

PART # DESCRIPTION SUG. RETAIL0703-0113 Flush mount gas cap $157.95

POP-UP GAS CAP•Features a weld-in, stainless steel bung with a pop-up aluminum gas cap

•Measures 23/8” dia.•Made in the U.S.A.

FOR 84-E96 STYLE TANKSPART # DESCRIPTION SUG. RETAILSPROCKET0703-0302 Left side, non-vented $199.950703-0303 Right side, vented 199.95SPOKE0703-0300 Left side, non-vented 199.950703-0301 Right side, vented 199.95

GAS CAPS•CNC machined from billet aluminum with a chrome finish

•Sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILNON-VENTED GAS CAPS WITH BUNG0703-0206 Spoke cap, chrome, w/ steel weld-in bung $179.950703-0207 Spoke cap, raw, w/ steel weld-in bung 159.950703-0211 Sprocket cap, chrome, w/ weld-in steel bung 179.950703-0212 Sprocket cap, raw, w/ weld-in steel bung 159.95VENTED GAS CAPS WITH BUNG0703-0208 Spoke cap, chrome, w/ steel weld-in bung 179.950703-0209 Spoke cap, chrome for 84-E96 right-hand

screw-in style gas tanks 199.950703-0210 Spoke cap, raw, w/ steel weld-in bung 159.950703-0213 Sprocket cap, chrome, w/ weld-in steel bung 179.950703-0214 Sprocket cap, chrome for 84-E96 right-hand

screw-in style gas tanks 199.950703-0215 Sprocket cap, raw, w/ steel weld-in bung 159.95GAS TANK BUNGS0703-0216 Aluminum weld-in bung for custom

aluminum tank applications 27.95

PART # DESCRIPTION SUG. RETAILFOR 96-11 HD MODELS0703-0351 JM U.S.A., black $59.950703-0352 Joker, black 59.950703-0353 Smooth, black 59.950703-0354 Techno, black 59.95

GAS CAPS•Chrome, black, brass or raw vented caps•Available with weld-in bungs for custom applications or with OEM bung inserts for stock tanks•Made in the U.S.A.

0703-03010703-0303

0703-0209

0703-0066

0703-0251

0703-0203

0703-0164

0703-0213

0703-0351

0703-0352

0703-03540703-0353


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

936

PART # DESCRIPTION SUG. RETAILFOR L96-11 MODELSDS-390198 Peaked vented $46.95DS-390223 Peaked non-vented 46.95DS-390224 Baby Moon vented 46.95DS-390229 Baby Moon non-vented 46.95DS-390238 Flamed vented 46.95DS-390273 Flamed non-vented 46.95

PART # DESCRIPTION SUG. RETAILFOR 84-E96 MODELSDS-390150 Peaked vented $46.95DS-390152 Baby Moon vented 46.95DS-390153 Baby Moon non-vented 46.95DS-390158 Flamed vented 46.95DS-390159 Flamed non-vented 46.95

NESS-TECH® “LOW GRAVITY” SCREW-IN GAS CAPS•Chrome billet caps are so thin you can barely tell they’re on the tanks•Feature a narrow knurled edge with ratcheting action cap so removal is easy•Available in various styles•Sold individually

PART # DESCRIPTION SUG. RETAILDS-390102 Baby Moon $44.95

“DUMMY” GAS CAP•For bikes with the fuel gauge on the left side

•Designed to match the Ness-Tech® “Low Gravity” Baby Moon-style gas caps

•Quality construction, chrome finish•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0703-0243 Smooth, non-vented $214.950703-0244 Smooth, vented 214.950703-0245 Notched, non-vented 214.950703-0246 Notched, vented 214.95

DEAD END GAS CAPS•CNC-machined from 6061 billet aluminum•Chrome finish•Comes with steel weld-in bung•For custom applications only•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0703-0065 Zombie vented gas cap $115.95

ZOMBIE GAS CAP•Leak-proof and oh so small•Weld-in unit drops into any steel tank for a minimalist look•Dimensions: bung measures 1.5” diameter; cap measures 13/4” diameter•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR L96-11 STYLE TANKS2107-1500 Warrior vented, chrome $43.950703-0063 Maltese vented, chrome 48.950703-0064 Maltese non-vented, chrome 48.950703-0220 Maltese vented, black 44.950703-0221 Maltese non-vented, black 44.950703-0235 Smoothie vented, chrome 49.950703-0236 Smoothie vented, black 49.950703-0237 Smoothie non-vented, chrome 49.950703-0238 Smoothie non-vented, black 49.95FOR 84-E96 STYLE TANKS0703-0239 Smoothie vented, chrome 49.950703-0240 Smoothie vented, black 49.950703-0241 Smoothie non-vented, chrome 49.950703-0242 Smoothie non-vented, black 49.95

BILLET GAS CAPS•Constructed from a solid piece of 6061 billet aluminum•Chrome-plated to show standards•Replace stock vented and non-vented caps•Crusader Maltese Cross cap has matching points cover, derby cover and inspection cover also available


PART # DESCRIPTION SUG. RETAIL301170 Pop-up w/ steel bung $83.95

POP-UP CAP•Pop-up vented gas cap assembly is available in steel construction

•Weld-in style, for custom applications•Made in the U.S.A.

PeakedBaby Moon Flamed

2107-1500

0703-0063

0703-0235

0703-0244

0703-0246

0703-0236


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

937

PART # DESCRIPTION SUG. RETAILFOR L96-11 MODELSDS-390081 Bandit gas cap (ea.) $50.95DS-390080 Bandit gas caps (pr.) 100.95DS-390083 Renegade gas cap (ea.) 50.95DS-390082 Renegade gas caps (pr.) 100.95FOR 84-E96 MODELSLMGC1041A Bandit gas cap (ea.) 50.95LMGC1041 Bandit gas caps (pr.) 100.95LMGC1042A Renegade gas cap (ea.) 50.95LMGC1042 Renegade gas caps (pr.) 100.95

PAINT PROTECTOR WITH BUILT-IN STAINLESS GAS CAP•Fits all screw-in gas tanks•Protects expensive paint jobs from fuel nozzle chips and gas vapors; upgrades the look with a custom gas cap

•Easy installation – Paint Protector simply screws into gas tank and is locked down with the church key provided, then gas cap screws into the Paint Protector, completely covering it

•Two styles to choose from: Bandit with peaked design and Renegade with smooth-domed design

•Paint Protector sleeve is machined from 6061 T-6 aircraft-quality billet aluminum; gas caps are machined from solid billet 303 stainless steel; all parts are polished

•Sold in pairs (one vented, one non-vented) or individually (one vented)•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR L96-11 MODELSDS-390020 Renegade (pr.) $83.95DS-390022 Bandit (pr.) 83.95

PART # DESCRIPTION SUG. RETAILFOR 84-E96 MODELSDS-390170 Renegade (pr.) $83.95DS-390171 Renegade (ea.) 44.95DS-390172 Bandit (pr.) 83.95

PART # DESCRIPTION SUG. RETAILFOR 84-E96 MODELSDS-390180 Renegade (pr.) $83.95DS-390181 Renegade (ea.) 44.95

PART # DESCRIPTION SUG. RETAILFOR 84-E96 MODELS (CONT)DS-390182 Bandit (pr.) $83.95DS-390190 Repl. gas cap key 4.95

STAINLESS STEEL THIN GAS CAPS•CNC-machined from 303 stainless steel•Hand polished to a brilliant shine•Available in two styles•Sold in pairs (one vented, one non-vented) or individually (one vented)•Bottle opener series comes with a Landmark gas cap key•Made in the U.S.A.

DESCRIPTION NON-LOCKING SUG. RETAIL LOCKING SUG. RETAILWELD-IN STEEL BUNG21/4” dia. vented DS-390050 $173.95 DS-390062 $202.9521/4” dia. non-vented DS-390051 173.95 DS-390063 202.953” dia. vented DS-390052 183.95 - -WELD-IN ALUMINUM BUNG21/4” dia. vented DS-390054 173.95 - -

DESCRIPTION NON-LOCKING SUG. RETAIL LOCKING SUG. RETAILBOLT-IN ALUMINUM BUNG21/4” dia. vented DS-390058 $183.95 DS-390066 $194.9521/4” dia. non-vented DS-390059 183.95 DS-390067 194.953” dia. vented DS-390060 187.95 - -

FLUSH-MOUNT GAS CAPS•Aircraft-style flush-mount polished gas caps are available in 21/4” and 3” diameters

•21/4” diameter caps come with or without key locks•Available in vented and non-vented versions•Feature “weld-in” or “bolt-in” style bungs•Bolt-in styles include bolts and nut plates, except PART #DS-390060

PART # DESCRIPTION SUG. RETAILPEAKED0703-0294 Vented, right-hand threads $25.950703-0295 Non-vented, left-hand threads 25.95STOCK STYLE0703-0296 Vented, right-hand threads 14.950703-0297 Non-vented, left-hand threads 12.95DOMED LOW-PROFILE0703-0298 Vented, right-hand threads 25.950703-0299 Non-vented, left-hand threads 25.95

GAS CAPS•Chrome-plated finish•Available in several styles•Sold each

Renegade

Renegade

Bandit

Bandit

Bottle opener series

Renegade

Bandit

Knurled series

DS-390062

DS-390051

DS-390052

DS-390054

DS-390060

DS-390066

Stock styleDomed Low-profile

Peaked

PART # DESCRIPTION SUG. RETAIL

DS-390038 Vented Fat Bob-style (right-hand thread) $49.95DS-390039 Non-vented Fat Bob-style (left-hand thread) 49.950703-0219 Repl. key for DS-390038, DS-390039 5.95

FLUSH-MOUNT GAS CAPS•High-tech look of aviation-style fuel fillers

•Simply screws into the stock opening in your gas tank

•Keyed entry permits the low profile and prevents unauthorized entry•Outer rings prevent chips around gas opening•Available in vented and non-vented styles for 83 and later screw-in style tanks (L96-11 tanks will require reusing the stock gas cap gasket)

•Sold eachU.S. Patent #400838.

DS-390039

DS-390038

PART # DESCRIPTION SUG. RETAILFOR MOST 84-11 MODELSDS-390127 Gold $44.95

PART # DESCRIPTION SUG. RETAILFOR MOST 84-11 MODELS (CONT)DS-390126 Chrome $21.95

“LIVE TO RIDE” GAS CAP COVERS•Gas cap covers are a great way to detail a bike•Available with a detailed chrome or gold-plated eagle/banner with the Live to Ride script recessed into each part

•Covers are held on by special adhesive tape and include one left- and one right-hand eagle emblem•Sold in pairs

DS-390127 DS-390126

BOTTLE OPENER SERIES

•Less than 3mm above the tank

KNURLED SERIES

•Less than 4mm above the tank

FOR L96-11 TANKS WITH SCREW-IN GAS CAP


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

938

DESCRIPTION22MM ROUND 22MM HEX

3/8” NPT ROUND

3/8” NPT HEX

90° OUTLET FACING FORWARDSmooth DS-390240 DS-390231 DS-390245 DS-390209Grooved DS-390241 - - -Lightning DS-390242 - - -Diamond - DS-390243 - -Flamed DS-390244 - - -90°OUTLET FACING BACKWARDSmooth DS-390250 DS-390233 DS-390255 -Grooved DS-390251 - - -Lightning DS-390252 - - -Diamond - DS-390253 DS-390258 -Flamed DS-390254 - - -180° OUTLET FACING INWARDFinned DS-390506 DS-390509 - -Wave DS-390507 - - -

DESCRIPTION22MM ROUND 22MM HEX

3/8” NPT ROUND

3/8” NPT HEX

180° OUTLET FACING INWARD (CONT)Smooth DS-390260 DS-390235 DS-390265 DS-390211Grooved DS-390261 - - -Lightning DS-390262 - - -Diamond - DS-390263 - DS-390268Flamed DS-390264 - - -Oval - DS-390510 - -Smooth (down outlet) - DS-390237 - DS-390213Flag 2107-0000 2107-0001 - -Old School Brass 0705-0094 0705-0092 0705-0093 0705-0091CHROME ADAPTER NUTS FOR 84-06 HD3/8” NPT x 22mm (approximately 7/8”) - - DS-390208 DS-39020822mm to 22mm (approximately 7/8”) 0705-0082 0705-0082 - -

PART # SUG. RETAIL0705-0082 $22.950705-0091 85.950705-0092 102.950705-0093 85.950705-0094 102.952107-0000 115.952107-0001 115.95DS-390208 22.95DS-390209 98.95DS-390211 98.95

PART # SUG. RETAILDS-390213 $110.95DS-390231 115.95DS-390233 115.95DS-390235 115.95DS-390237 127.95DS-390240 115.95DS-390241 115.95DS-390242 115.95DS-390243 118.95DS-390244 115.95

PART # SUG. RETAILDS-390245 $98.95DS-390250 115.95DS-390251 115.95DS-390252 115.95DS-390253 118.95DS-390254 115.95DS-390255 98.95DS-390258 101.95DS-390260 115.95DS-390261 115.95

PART # SUG. RETAILDS-390262 $115.95DS-390263 118.95DS-390264 115.95DS-390265 98.95DS-390268 101.95DS-390506 115.95DS-390507 115.95DS-390509 115.95DS-390510 115.95

POWER-FLO™ FUEL VALVES•Valves feature a brass body with show-quality chrome plating or Old School Brass finish•Substantially higher fuel flow compared to OEM or aftermarket fuel valve•Necessary for adequate fuel delivery even on stock motorcycles and a must for high performance•Available with 3/8” NPT or 22mm external threads•Adapter nut included on 22mm threaded valves•Patents apply•Made in the U.S.A.

NOTE: All descriptions are made from a seated position on the motorcycle with a reference from outlet position to the reserve position of the fuel valve lever.

PRICE LIST

Hose outletfacing forward

Hose outletfacing backward

Hose outletfacing inward

ROUND SERIES

HEX SERIES

Finned

Finned

Wave

Smooth

Oval

SmoothSmooth -Downoutlet

Grooved

Lightning

Diamond

Flamed

Flag

Flag

Old School Brass

Old School Brass

DS-390231


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

939

PART # DESCRIPTION SUG. RETAIL0705-0033 22mm round; 180° outlet facing inward $122.95

HIGH-FLOW FUEL VALVE WITH CUSTOM ROUND KNOB•Custom knob features a detent for positive “on” position with ball-milled grooves that gives the valve a nice grip and a custom look

•Substantially higher fuel flow than OEM or aftermarket fuel valves

•Very universal; will work in any tank location•Valve features a brass body with show-quality chrome plating

•Easy-to-read on, off and reserve positions•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0705-0042 Chopper valve $197.95

CHOPPER VALVE•Designed for use on bikes with custom fuel tanks that are raised high in front, which doesn’t allow proper fuel pickup with a standard reserve fuel valve

•Keeps the bottom of the tank clean from fuel lines, giving universal options for mounting the fuel valve with mounting holes on the back of the valve

•Smooth, clean lines with a compact design that measures 11/2” H x 2” L x 13/8” D

•Easy-to-operate position selector knob with a ball detent for positive on/off/reserve locating

•Two 5/16” hose inlets with one 5/16” hose outlet•Requires two hoses to be routed from the tank: one for on and one for reserve

•Provides exceptional fuel flow to feed the thirstiest big-inch motors•CNC-machined from billet brass, polished and chromed•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILHEX STYLE2107-0002 Left side mount, outlet facing forward; or

right side mount, outlet facing back $185.952107-0003 Left side mount, outlet facing back; or right

side mount, outlet facing forward 185.952107-0004 Universal configuration, outlet facing down 185.95ROUND STYLE0705-0083 Left side mount, outlet facing forward; or

right side mount, outlet facing back 185.950705-0084 Left side mount, outlet facing back; or right

side mount, outlet facing forward 185.950705-0085 Universal configuration, outlet facing down 185.95

VACUUM FUEL VALVES•Has the highest fuel flow of any vacuum-style fuel valve on the market

•The same feature as OEM vacuum fuel valves — when valve is left in the “on” position with the motor off, fuel flow is shut off automatically

•High-quality, lustrous chrome finish is the same as Pingel’s Power-Flo line of fuel valves

•Fits all 94-06 stock applications with 22mm external thread

•Will also fit 84-93 models if a vacuum source is tapped

•Outlet is a single 5/16” hose barb and will accept the stock vacuum line


NOTE: All descriptions are made from a seated position on the motorcycle with a reference from outlet position to the reserve position of the fuel valve lever.

PART # DESCRIPTION SUG. RETAILDS-390285 For tanks w/ 22mm external threads $145.950705-0058 For tanks w/ 3/8” NPT fittings 111.95DS-289141 -6AN fuel fitting 32.95

POWER-FLO™ -6AN FUEL VALVE•Chrome-plated solid brass hex-design petcock features a -6AN outlet

•For use with S&S E and G series carbs

•Fitting sold separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0705-0098 1/4” NPT, 180° outlet

facing inward $75.95

POWER-FLO FUEL VALVE WITH 1/4” NPT INLET•Hex design with a polished aluminum finish

•Universal configuration – can be used in almost any tank location

•Can be installed with the hose barb pointing in any direction that leaves the on/res/off lever accessible


PART # DESCRIPTION SUG. RETAIL0705-0032 In-line fuel valve $82.95

IN-LINE CUSTOM FUEL VALVE•Designed with the bike builder in mind•Eliminates the need to worry about fuel valve location•Simple on/off valve without reserve or filter•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-390225 Fuel valve rebuild kit, complete $62.95

PART # DESCRIPTION SUG. RETAILDS-390226 Fuel valve rebuild components only $75.95

FUEL VALVE REBUILD KIT•Designed to rebuild Pingel 3/8” NPT and 22mm single-outlet valves

•PART #DS-390225 includes all the special tools necessary, photos, instructions and enough components to rebuild three fuel valves

•PART #DS-390226 includes enough components to rebuild five fuel valves; does not include any of the tools

•A bench vise or press with a 61/2” or larger opening is necessary for installing a rebuild kit


NOTE: These kits are not designed for hose outlet down, dual or triple outlets, 1/4” NPT or race valves. Pingel recommends these valves be sent directly to them for rebuilding.

2107-0002

0705-0085

DS-289141

DS-390285

DS-390225

DS-390226


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

940

THE GUZZLER® FUEL VALVES•This is a serious fuel valve for serious riders•Hardcoat anodized billet aluminum and stainless steel construction

•Spring-loaded detents for positive on-off positioning; no reserve available

•Flows up to 211 ounces of fuel per minute•Available with 3/8” NPT or 22mm inlets•Some styles available highly polished for that custom look•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL22MM POLISHED0705-0049 Dual 90° 5/16” (7.9mm) outlet $171.950705-0050 Single -6AN outlet 167.950705-0051 Single 5/16” (7.9mm) outlet 155.950705-0052 Single 3/8” (3.5mm) outlet 155.9522MM CLEAR ANODIZEDDS-390503 Dual 90° 5/16” (7.9mm) outlet 173.950705-0029 Single -6AN outlet 145.95DS-390504 Single 5/16” (7.9mm) outlet 155.95DS-390505 Single 3/8” (3.5mm) outlet 155.95

PART # DESCRIPTION SUG. RETAIL3/8” NPT POLISHED0705-0047 Single 5/16” (7.9mm) outlet $144.950705-0056 Single -6AN outlet 154.953/8” NPT CLEAR ANODIZEDDS-390501 Dual 90° 5/16v” outlets 158.950705-0028 Single -6AN outlet 132.95DS-390502 Single 5/16” (7.9mm) outlet 139.955/16” IN-LINE POLISHED0705-0057 5/16” in-line 132.95

0705-0051

0705-0029

0705-0057

DS-390504

“CLICK-SLICK” PETCOCKS•Manufactured from 360 brass and stainless steel ball bearings and components; available in either a chrome, black or raw brass finish

•Features detents for quick, effortless switching from “On” to “Reserve” to “Off”•90° movement between each detent ensures positive transition when riding•Stainless steel internal ball bearings provide virtually friction-free petcock handle motion•Valve position firmly held in place and unaffected by vibration•Can be modified to fit custom tanks and/or be set to determine amount of reserve gas available with any custom gas tank•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL3/8” NPT CHROME0705-0014 Backward facing $111.950705-0015 Downward facing 111.950705-0016 Forward facing 111.950705-0017 Straight facing 111.950705-0018 6-AN 119.953/8” NPT RAW BRASS0705-0086 Backward facing 111.950705-0087 Downward facing 111.950705-0088 Forward facing 111.950705-0089 Straight facing 111.95

PART # DESCRIPTION SUG. RETAIL3/8” NPT BLACK0705-0100 Backward facing $111.950705-0101 Downward facing 111.950705-0102 Forward facing 111.950705-0103 Straight facing 111.950705-0104 6-AN 119.9522MM CHROME0705-0019 Backward facing 111.950705-0020 Downward facing 111.950705-0021 Forward facing 111.950705-0022 Straight facing 111.950705-0023 6-AN 119.95

PART # DESCRIPTION SUG. RETAIL22MM RAW BRASS0705-0061 Backward facing $111.950705-0062 Downward facing 111.950705-0063 Forward facing 111.950705-0064 Straight facing 111.9522MM BLACK0705-0105 Backward facing 111.950705-0106 Downward facing 111.950705-0107 Forward facing 111.950705-0108 Straight facing 111.950705-0109 6-AN 119.95

0705-00610705-0064

0705-0089

0705-0107

0705-01030705-0014 0705-0015 0705-0016

0705-0018

0705-0017 0705-0019

0705-0020 0705-0021 0705-00220705-0023


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

941

FUEL PETCOCKS•Hi-flow petcocks feature a round, smooth body with a chrome finish•Three-position knob (on, off, reserve) with a 5/16” fuel outlet•Fits most stock tanks and custom tanks with a 22mm outletPART # DESCRIPTION SUG. RETAIL0705-0002 Inward facing outlet $74.950705-0003 Down facing outlet 74.950705-0004 Forward facing outlet 74.95

0705-0002

0705-0003

0705-0004

PETCOCK•Constructed from triple-show-chrome-plated brass•Features an adjustable 360° swivel outlet and clicking detent that allows for accurate and universal positioning

•Significantly outflows stock and modified petcocks•Made in the U.S.A.

NOTE: Not for fuel-injected models.PART # DESCRIPTION SUG. RETAIL0705-0081 For stock and custom tanks w/ a 22mm outlet $79.95

HIGH-FLOW FUEL VALVE WITH SWIVEL SPIGOT•Chrome fuel valve from Accel is designed to replace all right, left and rear spigot applications

•Unique design that incorporates a banjo-type spigot with a 180° swivel onto a high-flow fuel valve with a 22mm nut

•Fuel outlet nipple is 5/16”•Features a 100 micron fuel screen

NOTE: Won’t fit 3/8” NPT thread tanks.

PART # DESCRIPTION SUG. RETAIL5106 High-flow fuel valve w/ swivel spigot $102.95

HIGH-FLOW CHROME PETCOCK•Features on, off and reserve with an easy-to-use knob, 5/16” barbed fuel outlet and a fine wire-mesh screen

•Valve has 3/8” NPT threads and comes with the 3/8” NPT to 22mm adapter nut

•Fits all fuel tanks with 22mm outlet•Features a 100 micron fuel screen

PART # DESCRIPTION SUG. RETAIL5105 Accel high-flow petcock w/ nut $82.95

PART # DESCRIPTION SUG. RETAIL22MMDS-390218 Straight spigot; repl. OEM #s 62166-81, 62168-81 $21.95DS-390219 90° spigot; repl. OEM #62167-81 21.95

CHROME PETCOCKS•Includes filter screen, three-position control and high fuel flow•22mm thread fittings, straight or 90° outlet •All are sold each

DS-390218

DS-390219

PART # DESCRIPTION SUG. RETAIL0705-0099 Rebuild kit $9.95

PETCOCK REBUILD KIT•Kit includes one bronze screen, one stainless steel screen, one viton seal, one spring washer and one gasket

•Fits Drag Specialties petcock PART #s DS-390216/217, DS-390218/219 and 0705-0002/0003/0004

•Kit contains components for several different styles of petcock; all components may not be used in every style


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

TANK FITTING KIT FOR FUEL-INJECTION TO CARBURETOR CONVERSION•Use when converting from OEM fuel-injection systems to use a carburetor in order to deliver adequate fuel for large-displacement engines

•Kit replaces the factory tank fittings, allowing the use of a high-quality, high-flow Pingel fuel valve to feed the carburetor

•Made of stainless steel•Kits include adapter and plug or adapter only with O-rings or gaskets

•See Pingel fuel valves on pages 938-940•Made in the U.S.A.

NOTE: Due to tight tolerances in the tank fittings, a Pingel fuel valve is the only one that will fit.

PETCOCK ADAPTER•Allows the use of a 22mm petcock in a fuel tank designed for Delphi fuel injection

•Original equipment in 01-06 FXSTD, 03-06 Dressers and 04-06 Softail carbureted bikes

•Includes O-ring for a leak-proof seal•Accepts any petcock that installs using a 22mm nut•Chrome-plated finish for great looks

942

0705-0055

FUEL TANK SELECTORS•Custom-mounts the fuel valve at any location

•Ideal for custom builds and choppers where the bottom of the fuel tank shows•Keeps fuel tank bottom clear of hoses or the petcock; allows you to get all the fuel out of raised front or stretched tanks by running hoses from the very low end of the fuel tank

•Needs two fuel hoses routed from gas tank: one for on and one for reserve (hoses sold separately)•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0705-0005 Tank selector w/ face plate $222.950705-0059 Tank selector w/ one-hole bracket 245.95

PART # DESCRIPTION SUG. RETAIL0705-0060 Tank selector w/ two-hole bracket $245.95

BUELL FUEL VALVE ADAPTER•Allows the mounting of any 22mm Pingel® fuel valve on Buell models

•Bolts in place of the stock fuel valve•A must for modified motors that need a higher-flow-rate fuel valve•Fuel valve must be purchased separately•Made in the U.S.A.PART # DESCRIPTION SUG. RETAIL0705-0027 For all 95-02 Buell models, except

fuel-injected models $35.95

PART # DESCRIPTION

SUG.

RETAIL0705-0031 For 00-03 models w/ Delphi EFI (adapter and plug);

for use w/ any Pingel 22mm valve $42.950705-0055 For 00-11 models w/ Delphi EFI (adapter only);

for use w/ any Pingel 22mm valve 24.950705-0030 For 95-01 FLT/FLHT models w/ Magneti Marelli EFI

(adapter and plug); for use w/ any Pingel 22mm valve 42.950705-0097 For 07-11 XL models; for use w/ any Pingel

1/4” NPT valve 62.95

PART # DESCRIPTION SUG. RETAIL0705-0054 Fuel tank outlet plug $14.95

FUEL TANK OUTLET PLUG•Use to plug the outlet on fuel tanks that use either the fuel-injection or petcock adapter

•Also for use on aftermarket fuel tanks that have dual fuel outlets, but only one is required for use

•Polished chrome finish•Includes O-ring seal•Fits OEM and aftermarket fuel tanks that accept petcock adapter OEM #62842-00 (Drag PART #0705-0024)

PART # DESCRIPTION SUG. RETAIL0705-0024 Petcock adapter; repl. OEM #62842-00 $16.95

PART # DESCRIPTION SUG. RETAILDS-390359 Petcock cover $29.95

PETCOCK COVER•Highly decorative chrome cover offers a unique custom look

•Large hex knob provides easy operation

•Installs quickly over OEM petcock•Fits 84-01 OEM petcocks


RETAIL0706-0037 For fuel-injected 01-07 Softails,

02-07 FLT, FLHT and FLHR fuel-injected models and 04-07 fuel-injected Dyna models $42.95

FUEL LINE FITTING COVER•Streamlined, two-piece cover adds a touch of chrome

0705-0030

0705-0097

Back view

Back view

0705-0059Front view

Front view

0705-0005


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

943

PART # DESCRIPTION SUG. RETAIL0707-0005 3/8” aluminum machined satin finish fuel filter (ea.) $34.950707-0006 3/8” aluminum chrome finish fuel filter (ea.) 39.950707-0007 -6AN aluminum machined satin finish fuel filter (ea.) 44.950707-0008 -6AN aluminum chrome finish fuel filter (ea.) 51.95

PART # DESCRIPTION SUG. RETAILDS-391662 5/16” aluminum chrome finish fuel filter (ea.) $43.95DS-391663 5/16” aluminum machined satin fuel filter (ea.) 37.95DS-391666 Repl. 40 micron bronze filter element w/ O-ring (ea.) 16.95

IN-LINE FUEL FILTERS•Pingel® high-flow custom fuel filters are available in aluminum machined satin or chrome finish

•Filters have a high-quality O-ring for a leak-proof seal•Cleanable, reusable 40 micron filter element•13/16” body length; 11/8” o.d.•Works great with Pingel’s high-volume fuel Valves•Made in the U.S.A.

0707-00050707-0008

DS-391662DS-391666

PEAK FLOW FUEL FILTERS•Machined from 6061 T-6 billet aluminum, then polished and chrome-plated

•Filter element is made from pleated 304 stainless steel; filters down to 10 microns and still flows 6 gal. a minute

•Mini filter body measures 13/4” L; super mini body measures 7/8” L (less fittings)

•Replacement filter element available•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-391102 1/4” fittings $48.95DS-391103 5/16” fittings 48.95DS-391104 3/8” fittings 48.95DS-391105 #4 AN fittings 48.95DS-391106 #6 AN fittings 48.95

MINI FILTER

PART # DESCRIPTION SUG. RETAILDS-391100 1/4” fittings $48.950707-00101 5/16” fittings 43.95

PART # DESCRIPTION SUG. RETAILDS-391107 Repl. filter element (ea.) $21.951 Silver anodized finish, not chrome-plated.

SUPER MINI FILTER

DS-391103

DS-391105

DS-391100


RETAIL45000 1/4”, chrome $15.9545010 1/4”, red 15.9545020 1/4”, blue 15.9545030 1/4”, black 15.9545060 5/16”, chrome 15.95


RETAIL45070 5/16”, red $15.9545080 5/16”, blue 15.9545090 5/16”, black 15.95DS-391708 Repl. fuel

filter element 6.95

ANODIZED FUEL FILTERS•Premium-quality custom Russell fuel filters with alloy cases and replaceable bronze elements

•Compact size for easy installation; available in two sizes and several colors



RETAIL14-34470 Red 1/4” $8.9514-34471 Blue 1/4” 8.9514-34472 Black 1/4” 8.9514-34473 Purple 1/4” 8.9514-34474 Gold 1/4” 8.95


RETAIL14-34430 Red 5/16” $8.9514-34431 Blue 5/16” 8.9514-34432 Black 5/16” 8.9514-34433 Purple 5/16” 8.9514-34434 Gold 5/16” 8.95

ANODIZED ALUMINUM FUEL FILTERS•Customize and protect with the same filter

•CNC-machined aluminum outer case•Cleanable brass filter element inside•Available in 1/4” and 5/16” sizes

PART # DESCRIPTION SUG. RETAIL14-34450 5/16” glass filter $9.9514-34460 5/16” metal filter 8.9514-34451 1/4” glass fuel filter 9.9514-34461 1/4” metal filter 8.9514-34455 Repl. filter (10-pk.) .90 (ea.)

UNIVERSAL FUEL FILTERS•Sizes to fit 1/4” or

5/16” fuel lines•Glass fuel filters have glass body with chrome end caps; include hose clamps and spare nylon filter element

•Metal high-performance fuel filters feature brass filter element, all-metal casing and hose clamps

14-34450

14-34460

PART # DESCRIPTION SUG. RETAILMINI FILTERSDS-391673 1/4” inlet $10.95DS-391671 5/16” inlet 10.95STANDARD FILTERSDS-391674 1/4” inlet 10.95

PART # DESCRIPTION SUG. RETAILSTANDARD FILTERS (CONT)DS-391672 5/16” inlet $10.95REPLACEMENT ELEMENTSDS-391675 Short 2.95DS-391676 Long 2.95

CLEAR FUEL FILTERS•Glass filters feature chrome ends•Available in two inlet sizes 1/4” or 5/16” i.d., and in two lengths: mini (13/8”) and standard (23/8”)

•Replacement filter elements available

DS-391673

DS-391671

DS-391674

DS-391672

DS-391675

DS-391676


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

944

FUEL FILTER KITS•OEM-style replacement fuel filters•Essential to keep bikes running in top condition•PART #0707-0011 includes filter, fuel line and clamps•PART #0707-0012 includes filter and O-ring•PART #0707-0013 includes filter only•PART #0707-0014 includes filter, strainer, O-ring, wire ties and clampPART # DESCRIPTION SUG. RETAIL0707-0011 For 01-07 FXST/FLST, 02-07 FLT/FLHT/FLHR/FLHX/FLTR

w/ Delphi EFI; repl. OEM #61001-01 $39.950707-0012 For 04-11 FXD, 08-11 FXST/FLST, 08-11 FLHT/FLHR/FLTR

and H-D FL Trike w/ Delphi EFI; repl. OEM #61011-04A 14.95

PART # DESCRIPTION SUG. RETAIL0707-0013 For 95-99 FLT/FLHT/FLHR/FLTR w/ Magnetti Marelli

EFI; repl OEM #61343-95 $39.950707-0014 For 07-11 XL w/ Delphi EFI; repl. OEM #75304-07A 39.95

0707-0011

0707-0012

0707-0013

0707-0014

FUEL CHECK VALVE ASSEMBLIES•Include check valve, required fittings and line•Meets or exceeds OEM requirements•For Delphi EFI systems only

PART # DESCRIPTION SUG. RETAIL0706-0127 For 08-11 FLHT/FLHR/FLHX/FLTR and H-D FL Trike

models; repl. OEM #62228-08A $29.950706-0126 For 03-07 FLHT/FLHR/FLHX/FLTR models;

repl. OEM #62228-03 21.95

PART # DESCRIPTION SUG. RETAIL0706-0125 For 02 FLHT/FLHR/FLTR models;

repl. OEM #61408-00 $21.950706-0129 For 08-11 Softail models; repl. OEM #62189-08 29.950706-0128 For 01-07 Softail models; repl. OEM #62189-01A 21.950706-0130 For 04-11 Dyna Glide models; repl. OEM #62194-04B 29.95

0706-01250706-01260706-01270706-0129

0706-0130

EFI FUEL LINES•High-quality OEM replacements•Replaces the fuel line from the tank to the fuel rail•Includes necessary connectors


RETAIL0706-0121 For 08-11 FLHT/FLHR/FLHX/FLTR and H-D FL Trike

models; repl. OEM #62905-08 $39.950706-0122 For 04-11 FXD, FXDWG models; repl. OEM #62349-04F 39.950706-0123 For 01-11 FXST, FLST models; repl. OEM #62900-01D 39.950706-0124 For 07-11 XL models; repl. OEM #27693-07 53.95

0706-0121 0706-0122

0706-01230706-0124

FUEL-INJECTION LINES•Upgrade over the stock kit•Flex lines are stainless steel braided

•Chrome steel hard line and fittings•All components are resistant to all chemicals found in gasoline

PART # DESCRIPTION SUG. RETAILHDFL005 Fuel-injection line for 95-99 FLHTCU-I,

98-99 FLHRC-I, 98-99 FLTR-I, 96-99 FLHTC-I, 96 FLTCU-I, 96-97 FLHR-I $159.95

FUEL TANK CROSSOVER LINES•Replaces the stock rubber lower crossover lines with stainless steel lines

•Seals with compression fittings for a positive seal•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILCROSSOVER LINES0706-0007 For 97-07 FLT/FLHT models $26.950706-0004 For 00-11 FXST/FLST models (except Deuce) 26.950706-0005 For 00-07 FXSTD models 26.950706-0006 For 86-99 FXST/FLST models 28.950706-0003 For 93-05 Dyna models 26.95REPLACEMENT WASHER0706-0016 For fuel lines (6-pk.) .95

0706-0016

0706-0005

PART # FITS MODELLENGTH INCLUDING FITTINGS

SUG. RETAIL

0706-0024 86-99 Softail 111/2” $44.950706-0025 00-11 Softail (except Deuce) 51/2” 44.950706-0026 00-07 Deuce 7” 44.950706-0027 97-07 FLT/FLHT/FLHR 101/2” 44.950706-0028 03 Dyna 51/4” 44.950706-0029 04-05 Dyna 53/4” 44.95

STERLING CHROMITE® II FUEL TANK CROSS-OVER LINES•Only Sterling Chromite® II uses the patented technology to create an exclusive braid that looks like chrome

•Perfectly matches color and weave of all other Magnum Sterling Chromite II cables and lines

•High-quality clear covering won’t discolor and makes cleaning easy•Polished chrome-plated ends•Complete compression-style line assemblies•Unique design eliminates leaks•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0706-0059 6” $28.950706-0060 9” 29.95

FUEL LINE CROSSOVER FOR CUSTOM TANKS•Stainless steel braided #3 line•Two chrome 90° fittings•For use with custom tanks•Available in 6” or 9” lengths•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0706-0010 For 99-05 Dyna, 53/4” $41.950706-0011 For 86-99 FXST/FLST, 103/4” 39.950706-0012 For 00-11 FXST/FLST, 51/2” (except FXSTD) 34.950706-0031 For 00-07 FXSTD 33.950706-0030 For 97-07 FLT 41.95DS-096648 Universal stainless steel crossover fuel line (not for FXR and Dyna)

for 1/4” outlets, 111/2” 45.95DS-222617 Repl. seals for crossover fuel line (6-pk.) 7.95

FUEL LINE CROSSOVERS•Braided stainless steel hose features

5/16” i.d. for maximum fuel flow•Attach to crossover tubes with compression fittings for a positive seal – no more worm gear clamps•Made in the U.S.A.

DS-096648

0706-0128


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

945

CUSTOM FUEL LINE CROSSOVER KIT•Braided stainless steel, 9” long•Allows equal gas flow to both sides of tank

•1/8” pipe thread fittings to tank and -3 chrome AN 90° hose ends•For use with custom tanks that have 1/8” NPT bungs in the bottom of the tank


PART # DESCRIPTION SUG. RETAIL0706-0008 Crossover kit $44.95

UNIVERSAL FUEL LINE CROSSOVERS•Clear-coated stainless braided hose•Chrome steel adapters•For use with tanks that feature 1/8” NPT ports in bottom of tank•Available in 6” and 8” lengths

PART # DESCRIPTION SUG. RETAIL0706-0140 6” $24.950706-0141 9” 25.95

0706-0141

FUEL LINE CROSSOVERS•Clear-coated stainless braided hose•Chrome-plated steel compression fittings•Use with OEM-style tanksPART # DESCRIPTION SUG. RETAILFUEL LINE CROSSOVERS0706-0142 For 00-11 FXST/FLST (except FXSTD) $32.950706-0143 For 86-99 FXST/FLST 32.950706-0146 For 00-07 FXSTD 32.950706-0145 For 99-05 FXD 32.950706-0144 For 97-07 FLT 32.95SEAL KITS0706-0147 For 00-11 FXST/FLST, 00-07 FXSTD, 97-07 FLT, (6-pk.) 3.950706-0148 For 86-99 FXST/FLST, 99-05 FXD, (6-pk.) 3.95

0706-0143

SMOOTH-STYLE CUSTOM OIL TANK•Bolt-on oil tank with a custom wraparound look is easily installed

•Made of chromed-finish, heavy-gauge steel

•Conveniently located drain and chrome filler cap

•Battery opening measures 73/8” L x 43/16” W x 59/16” D

•Features a 3.5 quart capacity with Softail-type oil line fittings and a two-piece front mounting bracket for easy installation

•Requires PART #DS-245262 drain plug•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-310231 Oil tank for 85-86 FX/FXWG $293.95DS-245262 Chrome hex-head drain plug, 1/8” NPT 2.95

CUSTOM OIL TANKS•3.5 quart capacity oil tanks in a chrome finish•Features a 1/4” pipe feed and return and 1/8” pipe vent•Center fill design•Measures 6” in dia. and 111/2” W•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST/FLST0710-0040 Round $338.950710-0041 Domed 338.95

0710-0040

0710-0041

CUSTOM OIL TANKS•Chrome-plated steel construction•Includes mounting tabs•Available in side or center fill•Domed ends•Designed with built-in battery box•Approximately 3.3 quart capacity

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST, FLST AND CUSTOM RIGID FRAMES0710-0021 Center fill $319.950710-0022 Side fill 319.95

0710-0021

0710-0022

PART # DESCRIPTION SUG. RETAILFOR 89-99 SOFTAILDS-310232 Center-fill $199.95DS-310113 Side-fill 214.95

WINGED OIL TANKS•Features chrome finish and a winged design that fills the gap between the tank and frame

•Includes filler cap and drain plug•Approximately 3.0 quart capacity

DS-310232

DS-310113

PART # DESCRIPTION SUG. RETAIL0710-0081 Oil tank for 00-09 Softail (approx.

3.5 quart capacity) $219.95DS-310109 Oil tank for 89-99 Softail (approx.

3.0 quart capacity); repl. OEM #62498-89A 199.950710-0089 Repl. oil filler plug for PART #0710-0081 16.95DS-350150 Repl. oil filler plug for PART #DS-310109 (ea.) 7.95

CHROME OIL TANKS•Features a side-fill design•PART #DS-310109 includes oil filler plug•PART #0710-0081 does not include filler plug; must be purchased separately

0710-0081 DS-310109

DS-350150


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

946

OIL TANK BRACKET SET•Replace the dull front and rear oil tank bracket on your late-model Softail with these chrome brackets

NOTE: Rear bracket requires 5/16”-24 x 5/8” bolts to mount on 93-99 models.

PART # DESCRIPTION SUG. RETAIL0710-0003 For 86-94 FXR and most aftermarket FXR frames $133.95

FXR OIL TANK•Formed steel construction with a chrome finish

•Bolt-in application; uses OEM mounts•Fittings, clamps and hoses included•Approximately 3.0 quart capacity

NOTE: Cap not included; must be purchased separately.

PART # DESCRIPTION SUG. RETAILFOR 99-08 FLT, FLHT, FLHR, FLHX, FLTR1105-0025 2-piece billet; chrome $999.951105-0027 1-piece; silver 499.951105-0028 1-piece; black 499.95FOR 93-98 FLT, FLHT, FLHR, FLHX, FLTR1105-0026 2-piece billet; chrome 999.951105-0029 1-piece; silver 499.951105-0030 1-piece; black 499.95

PLUS ONE OIL PAN•Reduces engine oil temperature by 10° on an 80° day•Increases capacity by one quart•Multiple integral baffles eliminate the stock plastic baffle with springs•Baker +1 pan has the feed located in the rear and the return in the front for a more complete system circulation

•Structurally located integral boss for Alloy Art TXR stabilizer•2-piece is constructed of billet aircraft grade 6061 T-6 aluminum•1-piece pans are Cast A356 T-6 and available in silver or black•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 02-06 FLHT, FLHR, FLHX, FLTR0710-00881 Chrome $325.950710-00921 Black 325.95FOR 00-01 FLT, FLHT, FLHR, FLTR0710-0087 Chrome 185.950710-0091 Black 185.95FOR 93-99 FLT, FLHT, FLHR, FLTR0710-0086 Chrome 185.950710-0090 Black 185.951 Includes polished stainless steel breather line.

FUNCTION-FORMED FL OIL SPOUT•Strong billet construction with a sleek and compact design that won’t interfere with larger-bodied starters or side covers

•Features a screw-in dipstick to keep the dipstick from popping out like stock dipsticks

•Available with chrome or black-anodized finish



RETAIL7805-3032 For 93-06 FLT, FLHT; repl. OEM #s 62419-93, 62470-02 $49.95

OIL FILLER HOUSING KIT•Chrome die-cast aluminum housing

•Comes complete with fitting, gasket, hardware and rubber hose

•Converts 93-98 breather style to late-model method of breathing

•Uses OEM dipstick

PART # DESCRIPTION SUG. RETAILDS-310225 For 85-86 FX and FXWG; repl. OEM #62534-65 $11.95

OIL TANK EDGING TRIM•Replacement-type, chrome edging trim


RETAILDS-310255 For 84-99 Softail; repl. OEM #62704-84 (rear),

62707-84 (front) $26.95

1105-0028

0710-0086

PART # DESCRIPTION SUG. RETAIL0710-0046 For 97-03 XL: repl. OEM #62475-97/62888-99 $149.95DS-310119 For 94-96 XL; repl. OEM #62475-94 144.95DS-310102 For 86-93 XL; repl. OEM #62475-83 133.95

CHROME OIL TANKS•A duplicate of the original equipment black oil tank, but this is highly polished and chrome-plated for exceptional looks

•Includes filler cap•Approximately 3.0 quart capacity

DS-310119

DS-310102


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

947

PART # DESCRIPTION SUG. RETAIL2404-0032 Repl. OEM #69123-92; features two

5/16”-18 studs, each 1/2” long $7.95 (ea.)DS-350145-PK Repl. OEM #62563-65; 1/4”-20 threaded studs

and steel side plates; for mounting battery boxes and oil tanks (5-pk.) 2.95 (ea.)

VIBRATION MOUNTS•For battery boxes, oil tanks or custom parts•Meet or exceed all OEM specifications

PART # DESCRIPTION SUG. RETAIL0710-0084 Repl. OEM #62563-65; 1/4”-20 x 1/2” studs (5-pk.) $3.95 (ea.)

HEAVY-DUTY VIBRATION MOUNT•Rubber mount with steel studs•Heavy-duty design has an internal spring for durability under high loads

•Sold to dealer in five-pack, sold to consumer as each

PART # DESCRIPTION SUG. RETAILDS-391240 Repl. OEM #s 11447 (grommet) and 5775 (sleeve) $1.95 (ea.)

TOP OIL TANK BRACKET GROMMET•Rubber grommet with metal sleeve•Sold each to the consumer; sold to dealers in packs of 10

PART # DESCRIPTION SUG. RETAIL0710-0033 For 00-11 FXST, FLST $89.957805-3042 For 84-99 FXST, FLST 89.957805-3030 For 86-03 XL models 89.95

LCD OIL TEMPERATURE GAUGE•Billet aluminum with liquid crystal display

•Push-button readout with automatic shutoff

PART # DESCRIPTION SUG. RETAILDS-330039 For all 00-11 FXST/FLST models $28.95DS-330033 For 84-99 FXST, FLST; 84-94 FXR;

84-92 FLT; 86-01 XL (23/4” L) 28.95DS-330031 For 85-86 FXWG (37/8” L) 28.950710-0047 For 04-11 XL 61.95

OIL PLUG TEMP GAUGE•Sensitive to oil temperatures up to 350°F•Chrome gauge bezel


RETAIL0710-0001 For 91-98 FXD, 93-98 FXDWG; repl. OEM #62685-95A $38.950710-0002 For 93-98 FLT/FLHT; repl. OEM #s 62640-93, 62607-93 25.95

OIL DIPSTICKS•Billet machined aluminum with a chrome finish

•Caps feature knurled edges to allow a good grip

•Plastic dipsticks have all required markings•Come with sealing gaskets

PART # DESCRIPTION SUG. RETAILFOR 00-11 FXST/FLST0710-0077 Notched $49.950710-0080 Smooth 49.95

DEAD END OIL TANK DIPSTICK/PLUG•CNC-machined from 6061 billet aluminum with a chrome finish•Replaces oil tank dipstick/plug•Comes with dipstick for easy oil level checking•Available in smooth and notched designs•Made in the U.S.A.NOTE: Oil must be checked with bike in level position.

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST/FLST MODELS AND CUSTOM APPLICATIONS (11/4” I.D. FILLER NECK)0710-0069 Notched $51.950710-0071 Smooth 51.95FOR 84-98 FLT/FLHT MODELS AND CUSTOM APPLICATIONS (17/8” I.D. FILLER NECK)0710-0068 Notched 57.950710-0070 Smooth 57.95

DEAD END OIL TANK PLUGS•CNC-machined from 6061 billet aluminum, then finished in chrome

•Replaces OEM oil plug•Available in smooth or notched style•Made in the U.S.A.

0710-0099

0710-0121

0710-0100

7805-3030

DS-330039

DS-330033 DS-330031

0710-0047

2404-0032

0710-0071

0710-0069

0710-0001

0710-0002

PART # DESCRIPTION SUG. RETAILFOR 00-11 SOFTAIL0710-0099 Skull $42.950710-0100 Flamed 42.950710-0120 Peaked 39.95FOR 84-99 SOFTAIL0710-0116 Peaked 39.95FOR 07-11 FLT, FLHT, FLTR, FLHX AND H-D FL TRIKES0710-0108 Skull 42.950710-0109 Flamed 42.950710-0115 Peaked 42.95FOR 00-06 FLT, FLHT, FLTR, FLHX0710-0106 Skull 42.950710-0107 Flamed 42.950710-0121 Peaked 39.95

CUSTOM OIL DIPSTICKS•Exact replacement for OEM dipstick•Three styles available•Includes the swiveling dipstick•Chrome plated with skull, flame or clean "peaked" design caps•Matching Points and horn covers available separately

0710-0077 0710-0080


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

948

PART # DESCRIPTION SUG. RETAILFOR 07-11 FLHT/FLHR/FLTR/FLHX/H-D FL TRIKE0710-0082 Black, finned $49.950710-0083 Chrome, finned 49.950710-0085 Black diamond edge 69.95

DIPSTICK COVERS•CNC machined from billet aluminum•Replaces the existing cover •Must remove OE cover before installation•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0710-0066 For 99-06 FLT, FLHT,

FLHX and FLHR models $36.95

DEAD END OIL DIPSTICK COVER•Attaches to the dipstick, replacing the existing cap

•CNC-machined 6061 billet aluminum with a chrome finish

•Notched design•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0711-0059 For all Twin Cam “B” motors $139.95

OIL LINE ADAPTERS•Let you connect rubber or braided oil lines to your engine

•Work like compression fittings so no ugly hose clamps are visible

•Sold as a set of three•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0932-0037 Shoulderless oil line fittings $22.95

SHOULDERLESS OIL LINE FITTINGS•Made of custom polished stainless steel•3/8” x 1/8” oil pump or breather nipples•Install with 1/4” Allen wrench (included)•Sold in a package of three•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0711-0157 Black $28.950711-0158 Chrome 29.95

OIL LINE FITTING KITS•For installation of custom oil lines on Twin Cam B motors

•Available in chrome or black finish•Use with Russell stainless or black oil lines for a professional look•Accepts custom oil lines with AN6 and AN8 fittings•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR ALL 84-92 BIG TWIN MODELSDS-245263 Straight 1/4” NPT x 3/8” hose $3.95DS-245264 90° 1/4” NPT street elbow (must use

w/ PART #DS-245263) 5.95DS-245265 45° 1/4” NPT street elbow (must use

w/ PART #DS-245263) 7.95

CHROME MOTOR CASE BREATHER FITTINGS•Highly polished and plated fittings


PART # DESCRIPTION SUG. RETAILDS-245200 45° elbow, 1/8” male NPT to 1/8” female NPT, for oil tanks, master cylinder, etc. $5.95DS-245205 90° elbow, 1/8” male NPT to 1/8” female NPT, for oil tanks, pressure gauges, etc. 4.95DS-245250 SAE inverted flare male connector, 3/16” o.d. tube to male 1/8” NPT,

for H-D brake lines, etc. 2.95DS-245252 3/8” union, to splice oil lines, cooler installations, etc. 4.95DS-245256 SAE inverted flare 90° male elbow, 3/16” o.d. tube to male 1/8” NPT,

for H-D brake lines, etc. 4.95DS-245257 SAE inverted flare 45° male elbow, 3/16” o.d. tube to male 1/8” NPT,

for H-D brake lines, etc. 5.95DS-245278 SAE inverted flare female connector, 3/16” o.d. to female 1/8” NPT,

for H-D brake lines, etc. 4.95DS-245258 Male 90° hose connector, 3/8” hose to male 1/8” NPT, for oil tanks, coolers, etc. 7.95DS-245259 Male 90° hose connector, 5/16” hose to male 1/8” NPT, used on oil tanks, gas tanks, etc. 6.95DS-245260 Male 90° hose connector, 1/4” hose to male 1/8” NPT, for oil tanks, coolers, etc. 6.95DS-245270 Male hose connector, 1/4” hose to male 1/8” NPT, for oil tanks, custom fuel tanks, etc. 3.95DS-245272 Male hose connector, 5/16” hose to 1/8” male NPT, for oil tanks, coolers, etc. 3.95DS-245274 Male hose connector, 3/8” hose to 1/8” male NPT, for oil tanks, coolers, etc. 3.95DS-245261 Hex socket plug, 3/8” male NPT, for H-D petcocks, etc. 3.95DS-245276 Hex socket plug, 1/8” male NPT, for custom petcocks, etc. 2.95

HOSE AND TANK FITTINGS•Chrome finish; sold individually•Made in the U.S.A.


RETAIL0711-0116 45° fitting, 1/8”

male NPT to 1/8” female NPT $16.95

0711-0117 Straight Barb fitting, 1/8” male NPT to 3/8” female NPT 13.95

0711-0118 90° fitting, 1/8” male NPT to 1/8” female NPT 14.95

HOSE AND TANK FITTINGS•Steel with a black chrome finish•Sold each•Made in the U.S.A.

DS-245200

DS-245205

DS-245250

DS-245252DS-245257

DS-245258

DS-245259

DS-245260

DS-245261

DS-245270

DS-245272

DS-245274DS-245276

DS-245278

DS-245263

DS-245264

DS-245265

0711-0157 0711-0158

0710-0082 0710-0083 0710-0085

0711-0116

0711-0118

0711-0117


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

949

PART # DESCRIPTION SUG. RETAILOIL LINE KITS0711-0036 For L92-99 FXST/FLST models (4-line kit) $126.950711-0035 For 90-E92 FXST/FLST models (6-line kit) 173.950711-0034 For 87-89 FXST/FLST models (4-line kit) 146.950711-0042 For 92-98 Dyna models (3-line kit) 112.950711-0038 For 91-94 FXR models (5-line kit) 153.950711-0037 For 87-90 FXR models (4-line kit) 153.950711-0041 For 94-03 XL models (3-line kit) 112.950711-0040 For 91-93 XL models (4-line kit) 146.950711-0039 For 86-90 XL models (5-line kit) 126.95REPLACEMENT WASHER0711-0063 For oil lines (6-pk.) .95

STAINLESS STEEL BRAIDED OIL LINE KITS•Direct replacements for OEM oil lines•Compression and NPT fittings are chrome-plated•Replacement washers are sold in 6-packs•Made in the U.S.A.

PART # LENGTHSUG.

RETAILDS-222601 8” $29.95DS-222602 9” 29.95DS-222603 10” 29.95DS-222604 11” 30.95DS-222605 12” 30.95DS-222606 13” 31.95DS-222607 14” 31.95DS-222608 15” 32.95DS-222609 16” 32.95DS-222610 17” 33.95

PART # LENGTHSUG.

RETAILDS-222611 18” $33.95DS-222612 20” 34.95DS-222613 22” 35.95DS-222614 24” 36.95DS-222615 26” 37.950711-0076 28” 37.95DS-222616 Repl.

compression fitting seals (12-pk.) 17.95

PRO SYSTEM INDIVIDUAL OIL LINES•Designed for applications when a stock oil line kit won’t work•Feature pre-assembled, individual 3/8” i.d. braided stainless steel Teflon® oil lines with rubber compression fittings

•Fit most standard 3/8” single-barb oil fittings•Length given is the overall length, including the fittings•Replacement seals for compression fittings available separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0711-0081 For 00-10 FXST/

FLST models $56.95

OIL LINE HOSE KIT•Oil hose feed kit for Softail bikes•Built with stainless steel hose and crimped on chrome ends


PART # DESCRIPTION SUG. RETAIL0711-0043 8” $26.950711-0044 9” 27.950711-0045 10” 27.950711-0046 11” 28.950711-0047 12” 28.950711-0048 13” 25.950711-0049 14” 29.950711-0050 15” 30.950711-0051 16” 31.95

PART # DESCRIPTION SUG. RETAIL0711-0052 17” $31.950711-0053 18” 32.950711-0054 20” 33.950711-0055 22” 34.950711-0056 24” 35.950711-0057 26” 36.950711-0063 Replacement seals

sold in 6-pk. .95 (ea.)

UNIVERSAL STAINLESS STEEL BRAIDED OIL LINES•Available in various lengths for any custom application•Include 1/8” NPT chrome compression fittings for easy installation•Measured overall, including fittings•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL600-06 -6 stainless steel hose, 12’ $117.95HD0100CH Tank stub fitting 29.95HD0103CH Straight 1/8” NPT 29.95HD4503CH 45° 1/8” NPT 44.95HD9003CH 90° 1/8” NPT 44.95HD-WASHER-6 Repl. oil line washer kit, 6-pack 8.95

UNIVERSAL OIL LINE AND -6 COMPONENTS•Premium-quality reusable oil line components•Chrome steel fittings and Teflon® hose are offered individually, so you can build the kit to suit your needs

•Fittings are used with our stainless steel braided PTFE-lined hose to provide optimal performance for any Big Twin

0711-0046

HD0100CH

0711-0063

0711-0035

600-06

HD0103CH HD4503CH HD9003CH


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

OIL FILTER/OIL COOLER•Filtration system designed to be used as an additional filter along with stock oil filter

•Drastically reduces contamination and viscosity breakdown in the oil

•Protects engine from cylinder/piston/ring/bearing wear, cylinder bore polishing and extreme oil temperatures

•Mounts above voltage regulator between frame rails to take advantage of air flow off front tire•Includes filter/cooler housing and mounting bracket, replaceable spun glass cartridge filter, off-set oil filter adapter, braided steel lines with swivel fittings, spin-on oil filter, ARP® 12 bolt fasteners and all necessary hardware


TWIN CAM VENT LINES•Replace unsightly stock crankcase-to-oil tank vent line

•High-luster chrome finish•Match other Russell Pro System braided lines


950


CHROME

0713-0042 For 00-11 FXST/FLST $498.95

0713-0043 For 99-11 Dyna w/ charcoal canister 498.95

0713-0070 For 99-11 Dyna w/o charcoal canister 498.95

0713-0044 For 99-11 FLHT, FLHR, FLTR w/o OEM oil coolers 498.95


BLACK

0713-0045 For 00-11 FXST/FLST $498.95

0713-0071 For 99-11 Dyna w/o charcoal canister 498.95

0713-0047 For 99-11 FLHT, FLHR, FLTR w/o OEM oil coolers 498.95


REPL. OIL FILTER W/ O-RING

0712-0103 For Feuling Oil Filter/Oil Cooler $22.95


0711-0032 For 02-06 FLT; repl. OEM #45808-02 $49.95

CRANKCASE VENT LINE•Highly chromed steel construction

•Replaces the rubber OEM crankcase-to-oil tank line•Includes fittings for easy installation



1204-0031 For 02-06 FLHT, FLHR, FLTR $62.95


0711-0133 6” $39.95

0711-0134 7” 39.95

0711-0135 8” 40.95

0711-0136 9” 41.95

0711-0137 10” 41.95


0711-0138 11” $42.95

0711-0139 13” 43.95

0711-0140 14” 44.95

0711-0141 15” 45.95

0711-0142 17” 46.95


0711-0144 19” $48.95

0711-0145 20” 47.95

0711-0146 21” 49.95

0711-0147 24” 51.95

0711-0148 26” 51.95

UNIVERSAL OIL LINES AND FITTINGS•Premium stainless steel braided hoses are available with female chromed steel swivel fittings that fit the universal chrome oil line fittings (sold separtately)

•Featuring durable PTFE hose liners•Made in the U.S.A.

NOTE: Oil line lengths are determined by measuring the distance between the flares of the female swivel fittings.

OIL LINES PART # DESCRIPTION SUG. RETAIL

0711-0149 Straight 1/8” NPT adapter $7.95

0711-0150 Straight 1/4” NPT adapter 7.95

0711-0151 45° 1/8” NPT adapter 13.95

0711-0152 45° 1/4” NPT adapter 13.95

0711-0153 90° 1/8” NPT adapter 13.95

0711-0154 90° 1/4” NPT adapter 13.95

FITTINGS

PART # SUG. RETAIL

0711-0110 $12.95

0711-0111 33.95

0711-0112 34.95

0711-0113 22.95

0711-0114 5.95

0711-0115 13.95

PART # SUG. RETAIL

0711-0119 $5.95

0711-0120 14.95

0711-0121 13.95

0711-0122 50.95

0711-0123 79.95

0711-0124 150.95

PART # SUG. RETAIL

0711-0125 $19.95

0711-0166 14.95

0711-0167 23.95

0711-0168 22.95

0711-0169 5.95

0711-0170 14.95

PART # SUG. RETAIL

0711-0171 $6.95

0711-0172 14.95

0711-0173 14.95

0711-0174 55.95

0711-0175 93.95

0711-0176 172.95

PART # SUG. RETAIL

0711-0177 $13.95

0711-0178 15.95

0711-0179 24.95

0711-0180 24.95

0711-0181 14.95

0711-0182 24.95

PART # SUG. RETAIL

0711-0183 $23.95

0711-0184 30.95

0711-0185 89.95

0711-0186 53.95

0711-0187 88.95

0711-0188 7.95

PART # SUG. RETAIL

0711-0189 $15.95

0711-0190 14.95

0711-0191 15.95

0711-0192 6.95

0711-0193 15.95

0711-0194 22.95

BLACK ENDURA DESCRIPTION11/32” -6 OIL HOSES

0711-0122 0711-0174 6’

0711-0123 0711-0175 10’

0711-0124 0711-0176 20’11/32” -8 OIL HOSES

- 0711-0184 3’

0711-0186 - 6’

0711-0187 0711-0185 10’

HOSE ENDS

0711-0110 0711-0166 -6, straight

BLACK ENDURA DESCRIPTION

HOSE ENDS (CONT)

0711-0181 0711-0178 -8, straight

0711-0111 0711-0167 -6, 45° swivel tube end

0711-0182 0711-0179 -8, 45° swivel tube end

0711-0112 0711-0168 -6, 90° swivel tube end

0711-0183 0711-0180 -8, 90° swivel tube end

0711-0125 0711-0177 -6, compression

ADAPTER FITTINGS

0711-0113 0711-0194 -6 x 1/8”, 45° flare to pipe

0711-0114 0711-0169 -6 x 1/8”, flare to pipe

BLACK ENDURA DESCRIPTION

ADAPTER FITTINGS (CONT)

0711-0115 0711-0170 -6 x 1/8”, 90° flare to pipe

0711-0119 0711-0171 -6 x 1/4”, flare to pipe

0711-0120 0711-0172 -6 x 1/4”, 90° flare to pipe

0711-0121 0711-0173 -6 x 1/4”, 45° flare to pipe

0711-0190 0711-0191 -8 x 3/8”, 45° flare to pipe

0711-0188 0711-0192 -8 x 3/8”, flare to pipe

0711-0189 0711-0193 -8 x 3/8”, 90° flare to pipe

UNIVERSAL BRAIDED OIL HOSE AND FITTINGS•Black oil hose is made from braided nylon that resists abrasion and corrosion; contains a secondary CPE style rubber liner with a nylon inner braid

•ProFlex oil hose is constructed with a stainless steel outer band that resists abrasion and corrosion; contains a secondary CPE style rubber liner with a nylon inner braid

•Very flexible yet will not collapse under extreme heat•Use with -6 or -8 full flow hose ends and adapter fittings; sold separately•Fittings and ends are constructed of lightweight black anodized aluminum or Endura which is a unique finish that simulates the appearance of stainless steel

•Hose ends feature a 37° angled sealing surface for a positive anti-leak seal

0711-0174

0711-0110 0711-01110711-0166 0711-0167

0711-0168

0711-0112

0711-0113 0711-01140711-0115 0711-0119

0711-01200711-0121

0711-01730711-0172

0711-0170 0711-0171

0711-0123

0711-0138

0711-0150

0713-0042

0713-0045

0712-0103

0711-0151


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

951

OIL FILTER MOUNTING BRACKET KITS•Billet oil filter mounting bracket for Twin Cam engines was specially designed and created for the S&S 124” Twin Cam engines, but makes a great cosmetic and functional upgrade for engines built with stock Twin Cam crankcases as well

•No voids or other casting defects in the material to cause leaks

•Position of the filter has been shifted slightly to give additional clearance between the filter body and the crankcase for easier filter installation and removal

•Also machined to make it easy to install an oil cooler in the pressure-side of the system; if a cooler is not needed, simply install the pipe plugs in the threaded holes in the filter bracket, instead of the hose fittings


SPIN-ON FILTER-COOLER KIT•Polished billet aluminum filter housing with stainless mounting plate

•Mounts directly to any 3/4”-16 spin-on filter mount•Provides oil cooling with easy oil filter changes•Includes all necessary seals plus three high-efficiency replacement filters



RETAILDS-275031 For 92-11 FLHT models w/o

OEM oil cooler, 91-11 FXD, 92-11 FXST/FXR, 86-11 XL; replaces oil filter OEM #s 63731-99, 63813-90, 63796-77A, 63805-80, 63805-83 $190.95

DS-275032 Repl. O-ring and flow valve kit for DS-275031 4.95

DS-275112 Repl. oil filter (ea.) 8.95

OIL FILTER CANISTER/OIL COOLER•External oil filter canister is made of polished and lacquered cast aluminum

•Comes with chromed brass hose fittings, machined aluminum cap with O-ring seal, 7’ of 3/8” oil line, four hose clamps and four tie-wraps

•Mounting hole size is 5/16” and center-to-center is 13/8”


PART # DESCRIPTION SUG. RETAILDS-275035 Perf-form filter canister $173.95DS-275115 Repl. filter 8.95

PART # DESCRIPTION SUG. RETAILDS-275040 Perf-form filter

canister mount for 85-86 FX, FXST and FXWG models $35.95

FILTER CANISTER MOUNT•Chrome mounting bracket allows easy horizontal mounting of any Perf-form™ filter canister over the voltage regulator in front of the engine

•Bolts to left front footpeg and kickstand frame lug

•Sold individually•Made in the U.S.A.

CHROME OIL FILTER/REGULATOR MOUNT•.250” machined-from-billet plate with oil passageways

•Predrilled to accept regulator•Mounts to front motor mount•Comes with mounting hardware and fittings and uses PART #s DS-275113/117 filter

•Made in the U.S.A.PART # DESCRIPTION SUG. RETAILDS-190781 For 84-99 FX models $108.95

PART # DESCRIPTION SUG. RETAILFOR 99-06 TWIN CAM (EXCEPT 06 DYNA) AND ALL S&S T-SERIES MOTORS0712-0059 Polished $138.950712-0312 Chrome 152.95FOR 92-99 TWIN CAM AND ALL S&S V-SERIES MOTORS0712-0313 Polished 208.95

DS-275031

0712-0059

0712-0313


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

952

PART # DESCRIPTION SUG. RETAIL0712-0038 For 92-99 80” Big Twins $232.95

BILLET OIL FILTER MOUNT•Designed to mount directly to the engine case•Conceals oil lines, clamps and fittings for a clean look•Machined from billet aluminum and chromed to a mirror finish•Fits Evo engines with mounting bosses in the engine case•Comes complete with mounting bolts and fittings to accept

3/8” oil hoses

PART # DESCRIPTION SUG. RETAIL0712-0035 For 92-99 80” Big Twin $99.95

SLIMLINE BILLET OIL FILTER MOUNT•Chrome-plated 1/2”-thick billet aluminum mount with

3/8” external fittings•Provides a low-cost, slim oil filter mount•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 99-11 TWIN CAM AND EFI EVO MODELS0712-0317 Chrome $189.950712-0318 Black 149.95

OFFSET OIL FILTER MOUNT•Sandwich-style mount allows easy hook-up of any style remote oil cooler or additional oil filter set up

•Designed with pressure relief valve rather than standard thermostat; pressure relief valve allows constant oil flow through remote oil cooler with total protection from starving engine from oil flow


PART # DESCRIPTION SUG. RETAIL0712-0269 For 99-06 Twin Cam “A” motors

(except 06 Dyna) $128.95

OIL FILTER MOUNTING KIT•6061 billet aluminum construction with a polished finish•Optimized oil passages flow almost 30% more efficiently than others on the market which means less oil pressure drop and cooler temps

•Works with any aftermarket oil cooler•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-275107 For all 92-99 Big Twin Evolution;

repl. OEM#26378-92A/26381-92A $42.95

CHROME OIL FILTER MOUNT•Designed to replace the OEM cast mount•Includes oil filter adapter•Mounts with OEM hardware•11/16” threads accept OEM hard lines

PART # DESCRIPTION SUG. RETAILDS-275104 For 92-99 80” Evolution Big Twin models $39.95

CUSTOM OIL FILTER MOUNT•Chrome filter mount features

3/8” fittings and may be used with stainless steel or rubber lines

•Accepts all types of oil filters

PART # DESCRIPTION SUG. RETAIL0711-0155 For 07-11 FXST/FLST $73.95

DELUXE OIL LINE NACELLE COVER•Blankets the area between the cam cover and the transmission

•Covers the oil lines and the exposed clutch cable where it enters the transmission cover

•Easily installed

PART # DESCRIPTION SUG. RETAIL0940-0495 For 00-06 FXST/FLST models $63.95

OIL LINE NACELLE COVER•Die-cast chrome cover dresses up the area between the cam cover and transmission

•Stock chrome oil lines exit through the cover for a high-tech appearance

0712-0317 0712-0318


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

953

PART # DESCRIPTION SUG. RETAIL0940-0439 For 99-06 FLHT/FLHR/FLTR; repl. OEM #37946-99 $39.95

PART # DESCRIPTION SUG. RETAIL0711-0058 For 00-06 FXST/FLST models $39.95

OIL LINE COVER•Chrome two-piece cover hides that plain rubber oil line beneath the right side of your oil tank

PART # DESCRIPTION SUG. RETAILDS-305020 For 99-05 FXD $49.951902-0024 For 02-06 FLT 94.95DS-305021 For 99-01 FLHR, 00-01 FLT 69.95

OIL LINE COVER/TRANSMISSION SHROUD•Oil lines disappear under a luscious layer of chrome

•Also covers the rough-cast area around the transmission•Easy installation

PART # DESCRIPTION SUG. RETAILDS-310241 For 86-99 FXST/FLST models $42.95

CHROME BILLET ALUMINUM OIL DRAIN•Unique drain mounts cleanly and easily to the rear of the transmission mounting plate

•Utilizes existing OEM hardware (mounting bolt and hose clamp)•Works on stock bikes as well as those running wide tires with offset transmissions

•Includes barbed oil line fitting and hex drive pipe plug•Made in the U.S.A.


RETAILDS-310249 For 99-09 Twin Cam FLHT, FLHR, FLTR and 99-05 FXD $17.95DS-310247 For 84-99 Evolution Big Twin 17.95DS-310248 For 86-03 XL 18.95

OIL FILTER DRAIN TRAYS•Tired of hot oil running down your oil filter and all over your bike and floor?

•Once the filter has been loosened, these unique drain trays fit underneath the oil filter and against the filter mount to direct the oil into your catch pan – not all over your bike or the floor

•Manufactured from a carefully selected polymer to resist chemical attack and dimensional distortion from the hot oil

•Easy to keep clean, and small enough to take with you on that long trip•Indispensable in any shop, home garage or on the road•Made in the U.S.A.; sold each


RETAILDS-310245 In-line oil drain for 89-99 FXST/FLST and 91-94 FXR $85.95DS-310243 1/2”-20 oil drain 79.95

NO-PAIN OIL DRAINS•Specially modified quick-release coupling makes oil changes a snap

•Simply attach the drain hose to the special coupler, drain the oil, remove the hose from the coupler and refill the tank

•No more oily mess or fumbling with a hose plug

•DS-310245 installs in-line on the OEM drain hose on 89-99 FXST/FLST and 91-94 FXR models

•DS-310243 replaces the stock oil plug on early-style (1/2”-20) oil tanks and remains permanently on the tank

•Made in the U.S.A. by Custom Cycle Engineering

FLO STAINLESS STEEL, REUSABLE “SPIN ON” OIL FILTER•Made from laser cut, medical grade, 304 stainless steel micronic filter cloth, this filter provides 200% more filter area in many cases

•Stainless filter catches items down to 35 microns, which is about three times better than most good paper or brass filters

•Unlike glued paper filters, the FLO Oil Filter pleat seam is welded and able to withstand up to 600 degrees•Filters maintain consistent flow under all conditions including extreme heat, the presence of water, and cold start ups where paper filters can flow so poorly that they often cause the bypass valve to open and allow unfiltered oil to enter your engine

•Anti-drain back valves are not required for this filter•Features black or polished billet aluminum housing•Should be the last filter an owner ever needs; this high tech filter technology is widely used in all types of auto racing including NASCAR, Indy type cars, Formula 1 and in the Aerospace industry where filtration is of the utmost importance

•Clean the element, spring and housing with solvent, kerosene, contact/brake cleaner or any degreasing agent, even common dish soap and water; see LUBES section for options (do not clean with gasoline)

DS-310249

DS-310247 DS-310248

DS-310243

1902-0024

DS-310245

0712-0351 0712-0219

OIL HOSE COVER•Brighten an unfinished area on stock bikes•Die-cast aluminum with a beautiful chrome finish•Includes mounting hardware

DESCRIPTIONBLACK PART #

POLISHED PART #

SUG. RETAIL

For 99-11 Twin Cam (all) 0712-0351 0712-0219 $109.95For 91-98 Dyna Glide 0712-0351 0712-0219 109.95For 82-98 FLT, 84-99 Softail, 85-11 XL, 09-10 XR1200 0712-0351 0712-0219 109.95For Buell 97-02 MC Cyclone, 95-02 S3 Thunderbolt, 96-02 X1 Lightning 0712-0351 0712-0219 109.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

954

DESCRIPTION BLACKSUG.

RETAILBLACK WITH NUT

SUG. RETAIL CHROME

SUG. RETAIL

CHROME WITH NUT

SUG. RETAIL

For 99-11 Twin Cam models; repl. OEM #63798-99 DS-275109 $8.95 0712-0021 $9.95 DS-275108 $10.95 0712-0011 $12.95For 84-98 FLT; 84-94 FXR; 84-99 FXST, FLST; L84-11 XL, 09-11 XR1200; repl. OEM #s 63796-77A, 63806-83 and 63805-80A DS-275204 7.45 0712-0019 9.95 DS-275203 10.95 0712-0009 12.95For 91-98 Dyna Glide; repl. OEM #63813-90 DS-275119 8.95 0712-0023 9.95 DS-275118 10.95 0712-0012 12.95For 02-11 V-Rod; repl. OEM #63793-01K 2005-1400 9.95 0712-0022 9.95 - - - -For 85-86 FX, FXWG; repl. OEM #s 63782-80A and 63810-80 DS-275206 7.95 0712-0132 9.95 DS-275205 10.95 0712-0018 12.95

SPIN-ON OIL FILTERS•High-quality spin-on filters are a dependable replacement for most H-D models

•Available in chrome and black versions•Twin Cam and V-Rod filters feature 10 micron paper•Filters with nut include a 17mm hex nut on the end of the filter for easy installation/removal

APPLICATION CHROME SUG. RETAIL CHROME WITH NUT SUG. RETAILFor 99-11 Twin Cam; repl. OEM #63798-99 (31/4”) DS-275188 $13.95 0712-0008 $14.95For 91-98 FXD; repl. OEM #63813-90 (51/2”) DS-275127 13.95 0712-0007 14.95For 84-98 FXST/FLST, 84-99 FLT, 86-11 XL, 09-11 XR1200, 84-94 FXR; repl. OEM #s 63796-77A, 63806-83, 63805-80A (31/4”) DS-275126 12.95 0712-0004 14.95For 85-86 FX; repl. OEM #s 63782-80, 63810-80 (21/4”) DS-275125 12.95 0712-0006 14.95

MAGNETIC RING OIL FILTERS•High-quality spin-on-style oil filters•Available in chrome or black•Magnetic filters are designed with a magnetic ring in center to capture small particles of loose metal and come with pressure relief valves•Twin Cam filters feature 10-micron paper•Some filters come with a 17mm nut on the end of the filter for easy installation/removal


RETAILDS-275130 Chrome filter for 99-11 Twin Cam models (3.5”)

w/ anti-drain back valve $15.95DS-275111 Black filter for 99-11 Twin Cam models (3.5”)

w/ anti-drain back valve 10.95DS-275114 Chrome filter for all 84-98 FLT/FLHT; 84-99 FXST, FLST;

86-11 XL, 09-11 XR1200; for all 94-02 Buell models (exc. Blast); repl. OEM #63796-77A (4.125”) 15.95


RETAILHD-2L Black filter for all 84-98 FLT/FLHT (including fuel-

injected models); 84-99 FXST, FLST; 86-11 XL; 09-11 XR1200; for all 94-02 Buell models (exc. Blast); repl. OEM #s 63805-80, 63806-83 (4.125”) $11.95

DS-275129 Chrome filter for all 91-98 Dyna Glide models; repl. OEM #63813-90 (5.5”) 15.95

DS-275128 Black filter for all 91-98 Dyna Glide models; repl. OEM #63812-90 (5.5”) 10.95

DS-275113 Chrome filter for 85-86 FXWG;repl. OEM #s 63810-80, 63782-80 (2.25”) 14.95

DS-275117 Black filter for 85-86 FXWG; repl. OEM #s 63810-80, 63782-80 (2.25”) 9.95

PERF-FORM OIL FILTERS•Black or chrome Perf-form oil filters have a proven service record•Made from the best materials and allow for quick changes•PART #s DS-275114 and HD-2L also fit most H-D accessory spin-on kits•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 99-11 TWIN CAM0712-0101 Black $11.950712-0102 Chrome 13.95

PART # DESCRIPTION SUG. RETAILFOR 84-99 BIG TWIN0712-0099 Black $11.950712-0100 Chrome 13.95

OIL FILTERS•Sturdy steel canister houses the finest filtering media and internal components available•Canister is slightly smaller in diameter than stock filters to make them easier to remove and install•Designed with a direct bypass valve that routes bypass oil directly to the filter exit, which minimizes the amount of contaminants carried to the engine in the unfiltered bypass oil

•The nominal particle capture size is smaller than that of stock filters while the resistance to oil flow is nearly the same•Available in black and chrome finish•Made in the U.S.A.

DS-275130 DS-275111

DS-275188

DS-275109 0712-0021 DS-275108 0712-0011 0712-0019DS-275203 DS-275119

0712-0023

0712-0012

2005-1400 DS-275206

0712-0008

0712-0007

0712-0006

DS-275114 HD-2L DS-275129 DS-275128 DS-275113 DS-275117

0712-0101

0712-0102


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

955

OIL FILTER MAGNETS•Easy to install – just attach to base of standard oil filter

•Standard oil filters only trap particles down to 20 microns, leaving the most harmful 5 to 20 micron particles to circulate through your engine

•Powerful six-point magnet traps harmful, abrasive hard metal particles down to one micron that regular filters don’t

•Invented by Dave Ashley and Dan Smith, winners of 17 Baja Off-road Championships, to help their race engines last through the extreme abuse of Baja racing

•Reduces wear and significantly increases engine life•Available with a 3/4” or 1” hole to fit most spin-on or cartridge oil filters

•Reusable for up to five oil filter changes

•Sold each

DESCRIPTION EMGO BLACK EMGO CHROME

91-98 Dyna Glide; repl. OEM #63812-90, 63813-90 10-82430 10-82420

84-98 FLT, 84-94 FXR, 84-99 FXST/FLST, 86-10 XL, 09-10 XR1200; all 94-02 Buell models (exc. Blast); repl. OEM #63731-99/A, 63781-72R, 63796-77/A, 63798-99/A, 63805-80/A, 63806-83 10-82410 10-82400

10-824501 10-824401

85-86 FL/FX 4-speed; repl. OEM #63782-80, 63810-80A 10-07700 10-07800

1 Micro-Tech filter.

PART # SUG. RETAIL

10-07700 $5.95

10-07800 6.95

10-82400 8.95

10-82410 6.95

PART # SUG. RETAIL

10-82420 $10.95

10-82430 8.95

10-82440 11.95

10-82450 7.95

EMGO OIL FILTERS•Only the highest quality paper, metal and rubber are used to manufacture these top-grade filters

•Bonded with extra strong epoxy (polyvinyl acetate) for long life•Clean oil makes engines last longer

PART # SUG. RETAIL

0712-0045 $13.95KN-170 13.95KN-170C 15.95KN-171B 13.95KN-171C 15.95KN-172C 13.95KN-173C 17.95KN-174C 15.95


0712-0213 For 09 Buell 1125R/CR $9.95

FITS MODEL REPLACES OEM # BLACK SUG. RETAIL CHROME SUG. RETAIL

For 99-11 Twin Cam models (anti-drain back valve) 63798-99, 63731-99 HF171B $7.05 HF171C $9.35

For 91-98 Dyna Glide 63812-90, 63813-90 - - HF173C 12.30

For 80-90 FLT, 84-94 FXR, 84-99 Softail, 86-11 XL, 09-11 XR 1200 63796-77A, 63805-80A HF170B 7.05 HF170C 9.50

For 85-86 FL/FX 4-speed 63782-80, 63810-80A - - HF172C 9.35

For 97-02 Cyclone M2, 94-02 Lightning S1/X1, 02 White Lightning X1W, 94-02 Thunderbolt S2/S2T/S3/S3T 63805-80A HF170B 7.05 HF170C 9.50

For 00-09 Buell Blast, 03-09 Buell Firebolt XB9R/Buell Lightning XB9S, 04-09 Buell Firebolt XB12R/Buell Lightning XB12S 63806-00Y 0712-0044 7.80 - -

For 09 Buell 1125R/CR - 0712-02131 9.95 - -

For 02-11 V-Rod - - - HF174C 9.35

1 Drop-in cartridge filter.

HIFLOFILTRO® OIL FILTERS•The original Hiflofiltro factory was founded in 1955 and has been manufacturing filters for the OEM motor industry since 1963

•With the experience of more than five decades, constant research and development and featuring a completely modern production facility Hiflofiltro offers some of the best quality filters in the world

•TUV approved and production monitored to ensure OEM or better quality•Constructed using the best materials available•One of the broadest ranges of aftermarket coverage

PART # SUG. RETAIL

PH4967 $9.00

PART # SUG. RETAIL

PH6019 $14.60

PART # SUG. RETAIL

PH6022 $10.30

PART # SUG. RETAIL

PH6065 $18.30

PART # SUG. RETAIL

PH6068 $19.60

FITS MODEL REPLACES OEM # BLACK CHROME

For 99-11 Twin Cam (anti-drain back valve) 63798-99, 63731-99 PH6022 -

For 91-98 Dyna Glide 63812-90, 63813-90 - PH6068

For 84-98 FLT, 84-94 FXR, 84-99 FXST/FLST, 86-11 XL, 09-11 XR 1200; all 94-02 Buell models (exc. Blast) 63731-99/A, 63781-72R, 63796-77/A, 63798-99/A, 63805-80/A, 63806-83 - PH6065

For 85-86 FL/FX 4-speed 63782-80, 63810-80A - PH6019

For 00-09 Buell Blast, 03-09 Buell Firebolt XB9R/Buell Lightning XB9S, 04-09 Buell Firebolt XB12R/Buell Lightning XB12S, 06-07 Ulysses XB12X 63806-00Y PH4967 -

OIL FILTERS•High-quality filters are made to strict specifications to provide superior performance

•Micron rating of 10 traps microscopic dirt particles without restricting oil flow•Include all necessary O-rings or gaskets•Available for spin-on applications


0712-0291 3/4” (19.05mm) $11.95

0712-0290 1” (25.4mm) 11.95

OIL FILTER MAGNETS•Polished ceramic-coated magnets•Two mini magnets designed for smaller motorcycle filters

•No restriction in oil flow•SAE-tested engine safe•Rated to a temperature of 842°F (450°C)•Removes a majority of wear particulates down to .5 microns

•Improves engine efficiency•Sold in pairsPART # DESCRIPTION SUG. RETAIL

0712-0139 Magna-Guard filter magnets $7.95

HF171B HF172C

PH6022 PH6068 PH6065

PH6019PH4967

0712-0291 0712-0290

DESCRIPTION REPLACES OEM # BLACK CHROME

For 99-11 Twin Cam (anti-drain back valve) 63798-99, 63731-99 KN-171B KN-171CFor 91-98 Dyna Glide (anti-drain back valve) 63812-90, 63813-90 - KN-173CFor 84-98 FLT, 84-94 FXR, 84-99 Softail, 86-11 XL, 09-11 XR 1200, all 94-02 Buell models (exc. Blast) 63796-77A, 63805-80A KN-170 KN-170CFor 03-11 V-Rod (anti-drain back valve) 63793-01K - KN-174CFor 85-86 FL/FX 4-speed, E84 XL 63782-80, 63810-80A - KN-172CFor 02-09 Buell Blast 500 (all), 04-09 Firebolt XB12R 1200, 03-09 Firebolt XB9R 900, 03-09 Lightning/CityX XB9S/SX 900, 04-09 Lightning XB12S/SCG 1200 6380600Y 0712-0045 -

K&N WRENCH OFF OIL FILTERS•K&N delivers a Race-Spec oil filter which is built with a synthetic media specifically designed to withstand the high concentrates of synthetic racing oils

•Synthetic filter media provides outstanding filtration at high-flow rates•Built to racing specifications•17mm hex nut allows easy-on/easy wrench-off•Predrilled for safety wire security•Protected by a heavy-duty canister and a double-rolled base plate•Check-valve/anti-drain back valve prevents drain-back and dry starts; where applicable•Prelubed base gasket for optimum seal•TUV production monitored and endorsed ensures the highest quality filters available


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

956

DESCRIPTION DELUXE SUG. RETAIL SLIMLINE SUG. RETAIL CHROME SUG. RETAILFor 84-11 FXST/FLST 0713-0002 $229.95 0713-0003 $189.95 0713-0005 $299.95For 91-11 FXD/FXDWG 0713-0002 229.95 0713-0003 189.95 0713-0005 299.95For 84-11 FLHT/FLHR/FLTR w/o OEM oil cooler 0713-0002 229.95 0713-0003 189.95 0713-0005 299.95For 84-99 FXR 0713-0002 229.95 0713-0003 189.95 0713-0005 299.95For 86-11 XL 0713-0002 229.95 0713-0003 189.95 0713-0005 299.95

DESCRIPTION BLACK SUG. RETAIL CHROME SUG. RETAILFor 00-11 FXST/FLST 0713-0029 $219.95 0713-0058 $279.95For 84-11 FLHT/FLHR/FLTR w/o OEM oil cooler 0713-0030 219.95 0713-0059 279.95

DESCRIPTION BLACK SUG. RETAIL CHROME SUG. RETAILFor 00-11 FXST/FLST 0713-0025 $189.95 - -For 84-08 FLHT/FLHR/FLTR J1270 189.95 0713-0007 $229.95

OIL COOLERSINSTALLATION TIME MEASURED IN MINUTESEXTRA RIDING TIME MEASURED IN YEARS•Cooler oil makes engines last longer – simple as that!•Jagg oil coolers feature cutting-edge technology to keep your engine cool under the most punishing conditions

•And because they're designed to look as good as they perform, they'll perfectly complement your bike's style

•Hoses and clamps are included with oil cooler kits

ENGINEERED TO PERFORM•Multipass oil flow configuration ensures the oil's utilization of the entire oil cooler

•Specially designed turbulators in each oil passageway gently stir oil, exposing it to more critical heat dissipation surface area for superior cooling with minimal oil pressure restriction

•Highly concentrated mini-louvered air fins allow maximum heat transfer•Made in the U.S.A.

NOTE: Vertical oil coolers do not fit touring models with lower fairings.

NOTE: Ten-row coolers are recommended for 95" and larger motors.

NOTE: Twin Cam models will require the use of oil filter adapter PART #J4600 or 0713-0031 to access oil supply.

6-ROW LOW-MOUNT HORIZONTAL OIL COOLERS

10-ROW INLINE VERTICAL-MOUNT OIL COOLERS

6-ROW VERTICAL-MOUNT OIL COOLERS

OIL COOLERS continued on next page.

0713-0002

0713-0005

0713-0029 0713-0059

0713-0003

0713-0025

0713-0007


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

957

DESCRIPTION BLACK SUG. RETAIL CHROME SUG. RETAILFor 91-11 FXD/FXDWG 0713-0064 $229.95 0713-0065 $279.95For 84-08 FLHT/FLHR/FLTR 0713-0054 229.95 0713-0063 279.95For 09-11 FLHT/FLHR/FLTR w/o OEM oil cooler 0713-0066 229.95 - -

DESCRIPTION BLACK SUG. RETAILFor 96-02 Buell J1390 $279.95

10-ROW LOW-MOUNT HORIZONTAL OIL COOLERS 6-ROW HIGH-MOUNT HORIZONTAL OIL COOLER

OIL COOLER ADAPTERS•Allow quick-and-easy access to oil supply for any oil cooler installation•Advanced design allows hot oil to go through the oil filter before it is routed through the oil cooler, resulting in less overall restriction and pressure drop

•PART #0713-0031 features an integrated automatic thermostatic actuator to ensure rapid engine warm-up•Anti-rotation kits (sold separately) ensure that the oil filter adapters PART #S J4600 and 0713-0031 cannot rotate during oil filter removal•PART #0713-0050 upgrade nut is designed to replace the stock threaded oil filter mounting stem on applications where stem is too long, to ensure proper oil flow characteristics when installing adapter PART #J4400


PART # DESCRIPTION SUG. RETAIL0713-0013 For 1" dia. frames $6.950713-0014 For 1 1/8" dia. frames 6.950713-0015 For 1 1/4" dia. frames 6.950713-0016 For 1 3/8" dia. frames 6.950713-0017 For 1 1/2" dia. frames 6.95

CLAMPS•For mounting Jagg's universal oil coolers, custom oil coolers, and many other applications


PART # DESCRIPTION SUG. RETAIL0713-0069 Automatic by-pass valve $84.95

AUTOMATIC OIL COOLER BY-PASS VALVE•Valve acts as an automatic thermostat allowing you to by-pass the cooler for cold weather riding or faster warm ups on cool days

•Works with all oil coolers•Durable anodized billet aluminum construction

•Compact in-line installation•Includes all necessary hardware and easy to follow installation instructions


RETAILJ4000B By-pass valve for all oil coolers $64.95

OIL COOLER BYPASS VALVE•Bypass valve J4000B works in conjunction with all oil coolers as a manual version of a thermostat

•Compact design blends into the oil lines, offering a less cluttered appearance



RETAILJ4400 Adapter for all H-D models w/ front-mounted

spin-on filters (except fuel-injected Evolution and all Twin Cam models) $89.95

J4600 Off-set adapter for fuel-injected Evolution and all Twin Cam models 109.95

0713-0031 Off-set adapter w/ automatic thermostat for fuel-injected Evolution and all Twin Cam models 149.95


RETAIL4600GK Service kit (repl. gasket) for oil filter adapter

PART #s J4600 and 0713-0031 $9.950713-0048 Off-set anti-rotation kit for adapter PART #s J4600

and 0713-0031, Twin Cam A models 9.950713-0049 Off-set anti-rotation kit for adapter PART #s J4600

and 0713-0031, Twin Cam B models 9.950713-0050 J4400 oil filter adapter upgrade nut for S&S motors 15.95

OIL COOLERS (CONT)

0713-0064 0713-0054 0713-0066 0713-0065

0713-0063

0713-0031 Back0713-0031 Front

J1390

J440 Front

J4600 Back

J440 Back

J4600 Front

0713-0048 0713-0049 0713-0050


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

958

CHROME OIL COOLER KIT•Kits mount to frame tubes with supplied clamps and reducers

•Available with or without a temperature gauge•Comes with AN #6 fittings (use with -6 lines found in most speed shops)

•If using standard 3/8" hose, use breather fittings PART #DS-245263 (sold separately)

•Measures 12" L x 2.25" diameter•CNC machined from billet aluminum and chrome plated•Replacement clamps available separately•Made in the U.S.A.

0713-0051

0713-0056DS-310204

PART # DESCRIPTION SUG. RETAILFOR 99-08 FLHT/I, FLHR/I, FLTR/I, FLHTCU/I (11/8" AND 11/4" CLAMPS)1911-5010 Chrome $438.951911-5011 Black w/ polished fins 438.951911-5012 Black 438.95FOR 91-05 FXD, FXDWG (11/4" AND 11/2" CLAMPS)1911-5007 Chrome 438.951911-5008 Black w/ polished fins 438.95FOR 06-11 FXD, 09-11 FLHT, FLHR, FLHX AND FLTR (11/2" CLAMPS)0713-0068 Chrome 397.950713-0067 Black 397.95FOR 00-09 FXST, FLST (11/4" CLAMPS)1911-5003 Chrome 438.951911-5004 Black w/ polished fins 438.951911-5005 Black 438.95FOR 84-99 FXST, FLST, FLHR/I, FLT/I, FLHR/I (11/8" CLAMPS)1911-5000 Chrome 438.951911-5001 Black w/ polished fins 438.951911-5002 Black 438.95

TUBE OIL COOLERS•Available in chrome, black with polished fins or all-black styles

•Coolers mount to the front down tube of the frame

•Twin Cam applications require an adapter to provide easy access to the oil supply (sold separately)

•Cooler includes required mounting hardware; hose clamps and oil line must be purchased separately (uses 3/8" i.d. oil line)

•Measures approximately 101/2" long with a 1" diameter•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0711-0156 Oil cooler hose kit $92.95

BLACK OIL COOLER HOSE KIT•Includes 3' of Russell Pro Classic black cloth braided hose and four Russell black anodized compression hose fittings

•A clean, no clamp installation on smooth barb oil cooler and filter adapters is provided by the fittings

•Gives you the perfect finishing touch to a durable cooler installation•Made in the U.S.A.

OIL COOLER COVER•Quality black vinyl cover features hook-and-loop fasteners for easy installation and removal

•Keeps oil at the correct operating temperature when riding in cool weather

•Designed for use on OEM and Jagg Slimline oil cooler•8" L x 21/4" W x 11/4" D•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0711-0060 1/4" x 25' $23.950711-0061 5/16" x 25' 26.950711-0062 3/8" x 25' 34.95

UNIVERSAL FUEL/OIL LINE•Universal, black fuel/oil line in 25' rolls•Reinforced line is fuel- and oil-resistant

PART # DESCRIPTION SUG. RETAIL3511-0001 Oil cooler cover $14.95

PART # DESCRIPTION SUG. RETAILFOR 1" TO 11/4" FRAME TUBESDS-310204 Oil cooler $330.950713-0052 Oil cooler w/ temp gauge 385.950713-0056 Replacement clamp 66.95FOR 11/2" FRAME TUBES0713-0019 Oil cooler 330.950713-0051 Oil cooler w/ temp gauge 385.950713-0057 Replacement clamp 66.95

1911-5007

1911-5004

1911-5002

PART # DESCRIPTION SUG. RETAIL0706-0103 1/16" i.d. x 25' $4.950706-0108 1/16" i.d. x 100' 13.950706-0104 1/8" i.d. x 25' 6.950706-0109 1/8" i.d. x 100' 23.950706-0105 3/16" i.d. x 25' 12.95

PART # DESCRIPTION SUG. RETAIL0706-0110 3/16" i.d. x 100' $54.950706-0106 1/4" i.d. x 25' 14.950706-0111 1/4" i.d. x 100' 56.950706-0107 5/16" i.d. x 25' 19.950706-0112 5/16" i.d. x 100' 78.95

BLUE POLYURETHANE FUEL LINE•High-quality, kink- and abrasion-resistant, transparent blue polyurethane line with exceptional chemical resistance including gasoline, grease and oil

•Strong, yet flexible and easily processed in assembly operations

•High tensile strength; withstands temperatures from -65°F to 220°F without deterioration

•Not to be used with fuel over 10% alcohol


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

959


RETAIL0706-0115 For 01-07 Softail,

00-07 FLHT/FLHR models $9.95

INTERNAL FUEL LINE•Internal fuel line for pump to filter on fuel-injected models

•Replaces OEM #62357-00•Sold each

PART # DESCRIPTION SUG. RETAILFUEL LINE, 3'M6219 1/4", clear $6.95M62191 1/4", black 6.95M6209 3/16", clear 6.95M62091 3/16", black 6.950706-0113 5/16", clear 6.950706-0114 5/16 ", black 6.95CARB VENT LINE, 5'M6109 1/8", clear 8.95M61091 1/8", black 8.95

FUEL AND CARBURETOR VENT LINE•Top-of-the-line U.S.-made fuel line will not harden or crack

•Fuel line available in 1/4", 3/16" and 5/16" i.d.; carburetor vent line available in 1/8" i.d.

•Choice of clear or black•Fuel line available in 3' lengths•Carb vent line comes in 5' lengths•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL3/16" I.D. X 5/16" O.D. – 3' LENGTHS0706-0038 Gray $8.950706-0041 Clear 9.950706-0044 Black 9.951/4" I.D. X 7/16" O.D. – 3' LENGTHS0706-0039 Gray 11.950706-0042 Clear 12.950706-0045 Black 12.955/16" X 1/2" O.D. – 3' LENGTHS0706-0040 Gray 13.950706-0043 Clear 13.950706-0046 Black 14.95

PART # DESCRIPTION SUG. RETAIL3/16" I.D. X 5/16" O.D. – 25' ROLLSMP12-031 Gray $54.950706-0021 Clear 57.950706-0018 Black 57.951/4" I.D. X 7/16" O.D. – 25' ROLLSMP12-032 Gray 79.950706-0022 Clear 83.950706-0019 Black 84.955/16" X 1/2" O.D. – 25' ROLLSMP12-033 Gray 95.950706-0023 Clear 95.950706-0020 Black 102.95

PREMIUM FUEL LINE•Stronger and more durable than vinyl fuel line

•Use with any type of gasoline•Resists swelling and hardening•Resistant to direct sunlight, hardening and/or cracking•Flexible in temperatures from -35F to +165°F •Fuel line stretches easily over fittings or petcocks•Sold in 3' lengths and 25' rolls

NOTE: Not for use with fuel-injected models.

PART # DESCRIPTION SUG. RETAIL1/4" I.D. 0706-0087 3' L $14.950706-0135 25' L 106.955/16" I.D. 0706-0088 3' L 16.950706-0136 25' L 123.95

LP (LOW PERMEATION) PREMIUM FUEL LINE•Meets the 2008 C.A.R.B. and EPA fuel line permeation standards for motorcycles, ATV, snowmobiles, PWC and small engines

•Flexible and kink-resistant•Gray color

PART # DESCRIPTION SUG. RETAILBRAIDED STAINLESS STEEL HOSE0711-0104 1/4" i.d. $121.950711-0105 5/16" i.d. 123.950711-0106 3/8" i.d. 125.95

PART # DESCRIPTION SUG. RETAILBRAIDED COPPER HOSE0711-0107 1/4" i.d. $101.950711-0108 5/16" i.d. 103.950711-0109 3/8" i.d. 106.95

BRAIDED STAINLESS AND COPPER HOSES•25' rolls of braided stainless steel or braided copper hoses for various OEM and custom applications


Stainless

0706-0087

Copper

PART # DESCRIPTION SUG. RETAIL0706-0150 1/4" x 3' L $15.950706-0151 5/16" x 3' L 15.950711-0195 3/8" x 2' L (for oil

tank drains) 21.95

PART # DESCRIPTION SUG. RETAIL0711-0196 1/2" x 2' roll $13.95DS-06226 3/8" x 25' roll 37.95DS-05226 5/16" x 25' roll 34.95DS-04226 1/4" x 25' roll 33.95

FUEL/OIL LINE•Reinforced, synthetic rubber, smooth-bore line is fuel- and oil-resistant•Made in the U.S.A.

0706-0150 0706-0151 0711-01960711-0195


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

960

PART # DESCRIPTION SUG. RETAILDS-096605 1/4" x 3' $18.95DS-096615 1/4" x 6' 34.95DS-096612 1/4" x 25' 139.95DS-096606 5/16" x 3' 21.95DS-096616 5/16" x 6' 39.95

PART # DESCRIPTION SUG. RETAILDS-096613 5/16" x 25' $167.95DS-096607 3/8" x 3' 22.95DS-096617 3/8" x 6' 44.95DS-096614 3/8" x 25' 167.95

STAINLESS STEEL BRAIDED HOSE•Available in 3', 6', or 25' lengths, stainless steel braided hoses can be used for any oil and gas applications

•Available in natural/silver colorPART # DESCRIPTION SUG. RETAILDS-096671 1/4" x 6' $31.95DS-096672 5/16" x 6' 32.95DS-096673 3/8" x 6' 34.95DS-096676 3/8" x 25' 148.95DS-096677 1/2" x 3' (For oil tank drains) 26.95

BLACK BRAIDED HOSE•Hose features a black nylon braided covering

•Suitable for either gas or oil applications

•Available in various sizes and lengths

PART # DESCRIPTION SUG. RETAIL1/4" HOSE0711-0090 6', stainless $44.950711-0091 10', stainless 67.955/16" HOSE0711-0093 6', stainless 44.950711-0094 10', stainless 74.95

PART # DESCRIPTION SUG. RETAIL5/16" HOSE (CONT)0711-0095 25', stainless $176.953/8" HOSE0711-0096 6', stainless 45.950711-0159 6', black 91.950711-0097 10', stainless 76.95

PART # DESCRIPTION SUG. RETAIL3/8" HOSE (CONT)0711-0160 12', black $172.950711-0098 25', stainless 180.95

BRAIDED HOSE•Braided hose is neoprene lined•Can be used as fuel line or oil line•For use with Goodridge hose finishers (sold separately)•Available in stainless or black finish

PART # DESCRIPTION SUG. RETAIL0711-0026 1/4" x 6' $76.950711-0028 3/8" x 6' 81.95

STERLING CHROMITE® II BRAIDED FUEL/OIL LINE•Features Sterling Chromite® II, the patented exclusive braid that looks like chrome

•Perfectly matches color and weave of all other Magnum Sterling Chromite II cables and lines

•High quality clear covering won't discolor and makes cleaning easy

•Premium quality hose uses a tough polyester inner reinforcement braid for high burst strength

•Cuts easily with scissors•Available in two sizes•Made in the U.S.A.

NOTE: Magnum connectors must be used with Magnum braided line.

PART # SIZE SUG. RETAIL0711-0087 1/4" $131.95

PART # SIZE SUG. RETAIL0711-0089 3/8" $158.95

STERLING CHROMITE® II BRAIDED FUEL/OIL LINE BUILDERS VALUE PACK•Only Sterling Chromite II uses patented technology to create an exclusive braid that looks like chrome

•Perfectly matches color and weave of Magnum Sterling Chromite II cables and lines•Sterling Chromite II has a high-quality clear covering that won't discolor and makes cleaning easy

•Contains premium quality hose with a tough polyester inner reinforcement braid for high burst strength

•Each builders value pack contains short pre-cut hoses in lengths most needed for basic construction of oil or fuel lines at a cost savings

•PART # 0711-0087 include three pieces of 15", 18" and 24"•PART # 0711-0089 includes four pieces of 15", three pieces of 18", two pieces of 24" and one piece of 30"

•Builders value packs provide hose for multiple bike builds•Trims easily with scissors•Made in the U.S.A.

PART # DESCRIPTION

SUG.

RETAIL1902-0033 9mm i.d. (fits 1/4" fuel line) $9.951902-0032 11mm i.d. (fits 7/16" o.d. fuel line) 9.951902-0031 25mm i.d. (fits 1" o.d. radiator hose) 10.951902-0030 38mm i.d. (fits 11/2" o.d. radiator hose) 10.95

HOSE PROTECTORS•Protect vulnerable and exposed hoses from heat and abrasion

•Protectors like this are showing up on more and more OEM applications

•Sizes for fuel and radiator hoses•10" L •Made from stainless spring steel•Sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-096608 5/16", 3/8"

hose ends $4.95 (ea.)DS-096609 1/4" hose ends 4.95 (ea.)

GROOVED CHROME HOSE ENDS WITH CLAMPS•Grooved hose end clamps give a finished look to rubber or braided oil/gas lines

•Sold to dealers in 6-pack


RETAILDS-096601 For 1/4", 5/16" hose ends

(2-pk.) $16.95DS-096598 For 1/4", 5/16" hose ends

(6-pk.) 34.95DS-096600 For 3/8" hose ends (2-pk.) 16.95DS-096599 For 3/8" hose ends (6-pk.) 34.95

POLISHED CHROME HOSE CONNECTORS•Smooth, polished style•Puts a finishing touch on any hose installation

•Includes stainless steel worm-gear clamps•Very affordably priced

NOTE: Magnum connectors must be used with Magnum braided line.

1902-0033

1902-0031

0711-0026

0711-0087

Black

Stainless

DS-096598

DS-096612


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

961

WIRE CLAMPS•Self-tensioning wire hose clamps for fuel or vacuum lines

•Quality plated steel for long-lasting durability and function

•15-piece assortment pack offers 5 each of 1/4”, 5/16” and 7/16” i.d. clamps

•150-piece assortment pack offers 50 of each size


COLORED HOSE CLAMPS•Custom colored hose clamps designed for use with braided copper and stainless steel hoses, and fit over most manufacturer’s braided rubber hoses

•Extruded from brass and finished with a matte metallic powder-coat

•Sold in packs of six – an average FXST or custom bike will use a minimum of six oil line clamps and two fuel line clamps



RETAILFOR 1/4” AND 5/16” FUEL LINE0706-0047 Black $36.950706-0049 Copper 43.950706-0051 Silver 36.950706-0053 Brass 36.95


RETAILFOR 3/8” OIL LINE0706-0048 Black $36.950706-0050 Copper 43.950706-0052 Silver 36.950706-0054 Brass 36.95

Black Copper Silver Brass STAINLESS STEEL MINI-CLAMPS•Designed for use on oil and gas lines up to 3/8” in diameter

•Made in the U.S.A.; sold in packs of ten

PART # DESCRIPTION SUG. RETAILDS-2152 Mini hose clamps $1.25 (ea.)

FINISHERS•Available in chrome-plated or black steel, or red or blue anodized aluminum

•Made in the U.K.


RETAIL936-04DB 1/4” blue $4.95936-04DCH 1/4” chrome 4.95936-07DB 5/16” , 3/8” blue 4.95


RETAIL936-07DCH 5/16”, 3/8” chrome $4.95936-07DR 5/16”, 3/8” red 4.950711-0161 5/16”, 3/8” black 6.95

PART # DESCRIPTION SUG. RETAILM30040 15-pc. $7.95M30041 150-pc. 23.95

5/16”-3/8” HOSE CLAMPS•Stainless steel with a black finish•Sold in 10-pk.

PART # DESCRIPTION SUG. RETAIL0713-0055 Universal hose clamps $12.95

PART # DESCRIPTION SUG. RETAIL (EA.)0706-0118 11.3mm; repl. OEM #10222 $1.500706-0119 12.3mm; repl. OEM #10304 1.500706-0120 50mm; repl. OEM #10303 1.95

FUEL LINE CLAMPS•Replacement clamps used when servicing the fuel pump and filter fuel lines on EFI models

•Stainless steel with one-ear Stepless style for a full 360° of closure around hose without any gaps

•Sold in 100-pks.•Made in the U.S.A.

0706-0118

0706-0119

0706-0120

OIL AND FUEL LINE CLAMP/SPLICE KIT•Heavy-duty forged crimping tool can be used from end or side and works in tight places

•Includes the following: 30 each of 1/4”, 5/16” and 3/8” i.d. hose clamps; one 1/2” i.d. clamp for oil drain hose on late model bikes; five each of special 1/4”, 5/16” and ten 3/8” stainless steel splice connectors

•1/4”, 3/8” and 1/2” clamps are conventional one-ear style•1/4”, 5/16” and 3/8” clamps are Stepless® style for a full 360° closure around hose with no gaps

PART # DESCRIPTION SUG. RETAILDS-390302 Clamp/hose splice kit w/ crimper tool (ea.) $191.95DS-390306 Repl. 1/4” Stepless® heavy-duty clamp (100-pk.);

repl. OEM #10014A .65DS-390307 Repl. 5/16” Stepless® heavy-duty clamp (100-pk.) .65DS-390308 Repl. 3/8” Stepless® heavy-duty clamp (100-pk.);

repl. OEM #10080 .65DS-390309 Repl. 1/4” one-ear conventional clamp (100-pk.);

repl. OEM #10014 .35DS-390310 Repl. 3/8” one-ear conventional clamp (100-pk.);

repl. OEM #10020A .35DS-390311 Repl. 1/2” one-ear conventional clamp (100-pk.);

repl. OEM #10086 .45DS-390312 Side- or end-type clamp crimper tool (ea.) 49.95

PART # DESCRIPTION SUG.RETAILMP12-034 Fuel line fitting kit $280.952401-0390 5/16” O-clips for 3/16” hose (10-pk.) 10.952401-0095 7/16” O-clips for 1/4” hose (10-pk.) 6.952401-0096 1/2” O-clips for 5/16” hose (10-pk.) 8.952401-0391 9/16” O-clips for 3/8” hose (10-pk.) 7.953801-0034 O-clip pincher tool 19.95

FUEL LINE FITTINGS KIT•Contains a wide selection of Y and T fittings, hose clamps, O-clips and O-clip pincher tool

•Sizes from 3/16”-3/8” •Includes 40 assorted O-clips, 40 assorted Y-connectors, 40 assorted T-connectors, hose clamps

•Includes ABS storage case•Replacements available in packs of 10 are listed below•Ideal for the shop or home mechanic•Made in the U.S.A.

MP12-034

15 TANKS & OIL FILTERS (Réservoirs et filtres à huile)2011

Documents

Transcript of 15 TANKS & OIL FILTERS (Réservoirs et filtres à huile)2011