15 Plastering
30
Page 1 PLASTERING
description
nnnnnnnnn
Transcript of 15 Plastering
Page 1
PLASTERING
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
1. Application of rendering coat>>>
The mortar is forcibly applied with mason’s trowel and pressed well into joints and over the surface.
The thickness of the coat is about 12 mm.
This is allowed to slightly harden.
The surface is left to set at least for 7 days.
Page 17
2. Application of floating coat>>>>>>>>
The rendering coat is cleaned off all dust.
It is lightly wetted.
The mortar is the spread and rubbed to the required plain surface.
After the floating coat is applied, it is then allowed to set for at least 10 days.
The thickness of the coat varies from 6 mm to 9mm
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Page 29
Page 30
