14cbewear
description
Transcript of 14cbewear
![Page 1: 14cbewear](https://reader033.fdocuments.in/reader033/viewer/2022042822/563db7bd550346aa9a8d8483/html5/thumbnails/1.jpg)
H45 - H100 Models
Consumable items
Bushings
Tools
Schedule maintenance
Membranes
Seals
Wear Components
![Page 2: 14cbewear](https://reader033.fdocuments.in/reader033/viewer/2022042822/563db7bd550346aa9a8d8483/html5/thumbnails/2.jpg)
Measure Depth of Worn Area Dimension “A”See Service Manuals for specifications.Replace Bushing if ID out of spec.
Wear Limits - Lower Tool Bushing
New
Worn Out
“A”
ID
![Page 3: 14cbewear](https://reader033.fdocuments.in/reader033/viewer/2022042822/563db7bd550346aa9a8d8483/html5/thumbnails/3.jpg)
Wear Limits - Upper Tool Bushing
Measure inside diameter of top end of Upper Tool Bushing. Replace if more than specifications allow.See service manuals for specifications.
H45 Example:New bushing diameter 45mmReplace if diameter is more than 47mm.
ID
![Page 4: 14cbewear](https://reader033.fdocuments.in/reader033/viewer/2022042822/563db7bd550346aa9a8d8483/html5/thumbnails/4.jpg)
Wear Limits -Tool
Upper Tool Bushing Area
Lower Tool Bushing Area
Measure Diameter of Tool at Upper and Lower Bushing Areas -- Replace Tool if not to specification.
See service manual for specifications.
H45 Example:New tool diameter 45 mmReplace tool if less than 43mm.