14.52 in Attach the Axle to the chassis using the four (4) bolts, washers, and nylon lock nuts....

8

Transcript of 14.52 in Attach the Axle to the chassis using the four (4) bolts, washers, and nylon lock nuts....

Page 1: 14.52 in Attach the Axle to the chassis using the four (4) bolts, washers, and nylon lock nuts. Mount the tires. Note: The wheel recess outside on the.
Page 2: 14.52 in Attach the Axle to the chassis using the four (4) bolts, washers, and nylon lock nuts. Mount the tires. Note: The wheel recess outside on the.

14.5

2 in

Attach the Axle to the chassis using the four (4) bolts, washers, and nylon lock nuts. Mount the tires.

Note: The wheel recess outside on the main tank will guide positioning

See Operators Manual for wheel height and track width adjustments.

Two on each side.

Page 3: 14.52 in Attach the Axle to the chassis using the four (4) bolts, washers, and nylon lock nuts. Mount the tires. Note: The wheel recess outside on the.

Attach the sprayers tongue using the two (2) hitch fastening plates with (8) bolts, washers, and nuts (found in Accessories box)

Note: The tongue is adjustable. Set proper tongue length before cutting/shortening the PTO.

Underside

Page 4: 14.52 in Attach the Axle to the chassis using the four (4) bolts, washers, and nylon lock nuts. Mount the tires. Note: The wheel recess outside on the.

Attach the Jack and PTO Support to the sides of the tongue

One (1) bolt, washer, and nut (found in Accessories box)

One (1) Pin attached to jack

Page 5: 14.52 in Attach the Axle to the chassis using the four (4) bolts, washers, and nylon lock nuts. Mount the tires. Note: The wheel recess outside on the.

Attach the step to the side of the chassis using two (2) bolts, washers, and nuts (found on the chassis)

The blue bypass hose connects to the top of the tank.

Page 6: 14.52 in Attach the Axle to the chassis using the four (4) bolts, washers, and nylon lock nuts. Mount the tires. Note: The wheel recess outside on the.

Mount Chemical Control Valve

Mount using two (2) bolts, washers and nuts

(found on the mounting bracket)

Connect chemical hoses, secure each with double hose clamps provided.

Tighten valve mounting bolts before connecting hoses.

Page 7: 14.52 in Attach the Axle to the chassis using the four (4) bolts, washers, and nylon lock nuts. Mount the tires. Note: The wheel recess outside on the.

Attach the chemical hoses their respective nozzle branches

Bypass

To top of tank

Left

Bra

nch

Rig

ht

Bra

nch

To

Pu

mp

Right BranchLeft B

ranch

Page 8: 14.52 in Attach the Axle to the chassis using the four (4) bolts, washers, and nylon lock nuts. Mount the tires. Note: The wheel recess outside on the.

Attach the bumper across the rear of the sprayer trailer using four (4) bolts into the threaded holes found on the chassis.

Two (2) Bolts on each side