141325 PS4 ChargeStation UM
2
ENGLISH SETUP: 1. Connect the included AC adapter to the DC input located on the bottom of the Charging Station. 2. Place charging station near an easily accessible wall-outlet. 3. Plug the included AC adapter into your wall outlet. CHARGING YOUR DUALSHOCK®4 CONTROLLERS: The Charging Station can charge one or two DUALSHOCK®4 controllers. • Dock your DUALSHOCK®4 controller by placing it over the Charging Station’s charge cradle and aligning the Charging Station’s connectors with your controller’s charge input. • Place the DUALSHOCK®4 controller onto the charging cradle and push down. The cradle will click into place to indicate the controller is properly docked. • If the DUALSHOCK®4 controller you’re charging isn’t currently connected to your PlayStation®4 console, it will illuminate orange to indicate charging. Once charging is complete, the DUALSHOCK®4 controller illumination will turn off. If the DUALSHOCK®4 controller is currently connected to the PlayStation®4 system, the controller colour will not change to indicate charging status. Charging status can be checked in the PlayStation®4 interface. To remove your DUALSHOCK®4 controller, press down on the controller. The cradle will release your controller. TROUBLESHOOTING: For current FAQs, visit www.PowerA.com/support Q: Why are my controllers not charging? A: Confirm your Charging Station AC adapter is connected to both the Charging Station and your wall outlet. A: Confirm your controllers are properly docked on the Charging Station. A: Your controller might already be fully charged. SUPPORT: For assistance with authentic PowerA accessories, please email PowerA@ bdainc.com or call (888) 664-4327 from 5 AM–5 PM PST. PowerA, the PowerA logo, and “Amplify Your Experience” are trademarks of Bensussen Deutsch and Associates, Inc. TM and © Bensussen Deutsch and Associates, Inc. Manufactured & distributed under license by Sony Computer Entertainment Europe.“ ”, “PlayStation”, “DUALSHOCK” are registered trademarks of Sony Computer Entertainment Inc. Also, “ ” is a trademark of the same company. All rights reserved. REGIONAL COMPLIANCE SYMBOLS: More information available via web-search of each symbol name. The WEEE symbol informs the end-user about separate disposal requirements for WEEE (Waste of electrical and electronic equipment) as required per the Article 11(2) of the WEEE Directive and prescribed by European standard EN50419:2005. CE (Conformité Européene aka European Conformity) is a certification mark that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area. The Regulatory Compliance Mark is a visible indication of a product’s compliance with all applicable ACMA (Australian Communications and Media Authority) regulatory arrangements, including all technical and record-keeping requirements regarding the electrical safety and/or electromagnetic compatibility (EMC). WARRANTY: 2-Year Limited Warranty: Visit PowerA.com for details. FCC AND IC NOTICE: Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IC CLASS B: This device complies with Industry Canada license- exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device mustaccept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. AUSTRALIAN WARRANTY STATEMENT: This product comes with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If purchased within Australia or New Zealand, this product comes with a one-year warranty from date of purchase. Defects in the product must have appeared within one year from date of purchase, in order to claim the warranty. All warranty claims must be facilitated back through the retailer of purchase in accordance with the retailer’s return policies and procedures. Any expenses incurred, as a result of returning the product to the retailer of purchase are the full responsibility of the consumer. AU WHOLESALE DISTRIBUTOR: Bluemouth Interactive Pty Ltd Level 2, 2 Darling Street South Yarra, VIC 3141, Australia +61 (3) 9867 2666 MANUFACTURED BY: Bensussen Deutsch & Associates, Inc. (BDA, Inc.) 15525 Woodinville-Redmond Rd. NE Woodinville, WA 98072 www.bdainc.com FRANÇAIS INSTALLATION: 1. Connectez l’adaptateur CA inclus à l’entrée CC située en bas de la station de chargement. 2. Placez la station de charge près d’une prise murale facile d’accès. 3. Branchez l’adaptateur CA sur une prise murale. CHARGEMENT DE VOS CONTRÔLEURS DUALSHOCK®4: La station de chargement peut charger un ou deux contrôleurs DUALSHOCK®4 à la fois. • Placez votre contrôleur DUALSHOCK®4 sur le socle de la station de chargement et alignez les connecteurs de cette dernière à l’entrée de chargement de votre contrôleur. • Positionnez le contrôleur DUALSHOCK®4 sur le socle de chargement en appuyant dessus. Un clic sur le socle vous indiquera que le contrôleur est correctement positionné. • Si la manette sans fil DUALSHOCK®4 que vous chargez n’est pas connectée à votre console PlayStation®4, la barre lumineuse de la manette Press down to remove controllers Connect the AC adapter Dock your controllers 3 1 2 Customer Service Service client / Kundendienst / Servicio a clientes / Assistenza clienti / Apoio ao Cliente Customer [email protected] 2-Year Limited Warranty: Visit PowerA.com for details and to register your product Garantía limitada de 2 años. Visita PowerA.com para obtener detalles y para registrarte. Garantia limitada de 2 anos: Visita PowerA.com para obter detalhes e registar o teu produto Beschränkte 2-Jahres-Garantie – Details und Informationen zur Anmeldung finden Sie unter PowerA.com. Garantie limitée de 2 ans – Rendez-vous sur PowerA.com pour de plus amples informations et pour enregistrer votre achat. Garantia limitada de 2 anos: Visita PowerA.com para obter detalhes e registar o teu produto CHARGING STATION USER MANUAL Manuel de l’utilisateur, Bedienungsanleitung, Manual de usuario, Manuale per l’uso, Manual do usuário BDA Inc. 15525 Woodinville-Redmond Rd NE Woodinville, WA 98072
Transcript of 141325 PS4 ChargeStation UM
ENGLISHSETUP: 1. Connect the included AC adapter to the DC input
located on the bottom of the Charging Station.
2. Place charging station near an easily accessible wall-outlet.
3. Plug the included AC adapter into your wall outlet.
CHARGING YOUR DUALSHOCK®4 CONTROLLERS:The Charging Station can charge one or two DUALSHOCK®4 controllers.
• Dock your DUALSHOCK®4 controller by placing it over the Charging Station’s charge cradle and aligning the Charging Station’s connectors with your controller’s charge input.
• Place the DUALSHOCK®4 controller onto the charging cradle and push down. The cradle will click into place to indicate the controller is properly docked.
• If the DUALSHOCK®4 controller you’re charging isn’t currently connected to your PlayStation®4 console, it will illuminate orange to indicate charging. Once charging is complete, the DUALSHOCK®4 controller illumination will turn off. If the DUALSHOCK®4 controller is currently connected to the PlayStation®4 system, the controller colour will not change to indicate charging status. Charging status can be checked in the PlayStation®4 interface.
To remove your DUALSHOCK®4 controller, press down on the controller. The cradle will release your controller.
TROUBLESHOOTING:For current FAQs, visit www.PowerA.com/support
Q: Why are my controllers not charging?
A: Confirm your Charging Station AC adapter is connected to both the Charging Station and your wall outlet.
A: Confirm your controllers are properly docked on the Charging Station.
A: Your controller might already be fully charged.
SUPPORT:For assistance with authentic PowerA accessories, please email PowerA@ bdainc.com or call (888) 664-4327 from 5 AM–5 PM PST. PowerA, the PowerA logo, and “Amplify Your Experience” are trademarks of Bensussen Deutsch and Associates, Inc. TM and © Bensussen Deutsch and Associates, Inc.
Manufactured & distributed under license by Sony Computer Entertainment Europe.“”, “PlayStation”, “DUALSHOCK” are registered trademarks of Sony Computer Entertainment Inc. Also, “ ” is a trademark of the same company. All rights reserved.
REGIONAL COMPLIANCE SYMBOLS:More information available via web-search of each symbol name.
The WEEE symbol informs the end-user about separate disposal requirements for WEEE (Waste of electrical and electronic equipment) as required per the Article
11(2) of the WEEE Directive and prescribed by European standard EN50419:2005.
CE (Conformité Européene aka European Conformity) is a certification mark that
indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area.
The Regulatory Compliance Mark is a visible indication of a product’s
compliance with all applicable ACMA (Australian Communications and Media Authority) regulatory arrangements, including all technical and record-keeping requirements regarding the electrical safety and/or electromagnetic compatibility (EMC).
WARRANTY:2-Year Limited Warranty: Visit PowerA.com for details.
FCC AND IC NOTICE:Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
IC CLASS B:This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device mustaccept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.
AUSTRALIAN WARRANTY STATEMENT:This product comes with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If purchased within Australia or New Zealand, this product comes
with a one-year warranty from date of purchase. Defects in the product must have appeared within one year from date of purchase, in order to claim the warranty. All warranty claims must be facilitated back through the retailer of purchase in accordance with the retailer’s return policies and procedures. Any expenses incurred, as a result of returning the product to the retailer of purchase are the full responsibility of the consumer.
AU WHOLESALE DISTRIBUTOR:Bluemouth Interactive Pty Ltd Level 2, 2 Darling Street South Yarra, VIC 3141, Australia +61 (3) 9867 2666
MANUFACTURED BY:Bensussen Deutsch & Associates, Inc. (BDA, Inc.) 15525 Woodinville-Redmond Rd. NE Woodinville, WA 98072 www.bdainc.com
FRANÇAISINSTALLATION: 1. Connectez l’adaptateur CA inclus à l’entrée CC
située en bas de la station de chargement.
2. Placez la station de charge près d’une prise murale facile d’accès.
3. Branchez l’adaptateur CA sur une prise murale.
CHARGEMENT DE VOS CONTRÔLEURS DUALSHOCK®4:La station de chargement peut charger un ou deux contrôleurs DUALSHOCK®4 à la fois.
• Placez votre contrôleur DUALSHOCK®4 sur le socle de la station de chargement et alignez les connecteurs de cette dernière à l’entrée de chargement de votre contrôleur.
• Positionnez le contrôleur DUALSHOCK®4 sur le socle de chargement en appuyant dessus. Un clic sur le socle vous indiquera que le contrôleur est correctement positionné.
• Si la manette sans fil DUALSHOCK®4 que vous chargez n’est pas connectée à votre console PlayStation®4, la barre lumineuse de la manette
Press down to remove controllersConnect the AC adapter Dock your controllers 31 2
Customer ServiceService client / Kundendienst / Servicio a clientes/ Assistenza clienti / Apoio ao Cliente
Customer [email protected]
2-Year Limited Warranty: Visit PowerA.com for details and to register your product
Garantía limitada de 2 años. Visita PowerA.com para obtener detalles y para registrarte.
Garantia limitada de 2 anos: Visita PowerA.com para obter detalhes e registar o teu produto
Beschränkte 2-Jahres-Garantie – Details und Informationen zur Anmeldung finden Sie unter PowerA.com.
Garantie limitée de 2 ans – Rendez-vous sur PowerA.com pour de plus amples informations et pour enregistrer votre achat.
Garantia limitada de 2 anos: Visita PowerA.com para obter detalhes e registar o teu produto
CHARGINGSTATION
USER MANUALManuel de l’utilisateur, Bedienungsanleitung, Manual de usuario, Manuale per l’uso,Manual do usuário
BDA Inc.15525 Woodinville-Redmond Rd NE
Woodinville, WA 98072
s’allume en orange pour indiquer qu’elle est en train de charger. Une fois que la manette est entièrement chargée, la barre de la manette s’éteint.
• Si la manette sans fil DUALSHOCK®4 que vous chargez est connectée à votre console PlayStation®4, la barre lumineuse de la manette s’allume de la même couleur pour indiquer qu’elle est en train de charger. Vous pouvez consulter l’état de la charge sur l’écran d’accueil de votre PlayStation®4.
Pour retirer le contrôleur DUALSHOCK®4, appuyez sur le contrôleur. Le socle relâchera alors le contrôleur.
DÉPANNAGE:Pour consulter les Questions fréquemment posées, rendez-vous sur www.PowerA.com/support
Q: Pourquoi mes contrôleurs ne se chargent pas?
R: Vérifiez que l’adaptateur CA de votre station de chargement est bien connecté à celle-ci et bien branché sur une prise murale.
R: Vérifiez que vos contrôleurs sont correctement positionnés sur la station de chargement.
R: Votre contrôleur est peut-être déjà entièrement chargé.
ASSISTANCE:Pour obtenir de l’aide concernant les accessoires authentiques PowerA, veuillez envoyer un courriel à [email protected] ou bien composer le +1 888 664-4327 entre 5 h et 17 h, heure normale du Pacifique. PowerA, le logo PowerA et « Amplify Your Experience » sont des marques de commerce de Bensussen Deutsch and Associates, Inc. Marque de commerce et © Bensussen Deutsch and Associates, Inc.
Fabriqué et distribué en vertu d’une licence par Sony Computer Entertainment America LLC. «PlayStation», le logo de la famille «PS» et «DUALSHOCK» sont des marques déposées de Bensussen Deutsch and Associates, Inc. TM et © Bensussen Deutsch and Associates, Inc.
SYMBOLES DE CONFORMITÉ RÉGIONAUX:Vous trouverez plus d’information sur chaque nom de symbole au moyen d’une recherche sur le Web.
Le symbole DEEE informe l’utilisateur final des exigences en matière d’élimination séparée pour les DEEE (déchets d’équipements électriques et électroniques), comme l’exigent
l’article 11(2) de la Directive DEEE et la norme européenne EN50419:2005.
CE (Conformité Européene ou European Conformity) est une marque de certification
qui indique la conformité avec les normes de santé, de sécurité et de protection de l’environnement pour les produits vendus dans l’Espace économique européen.
Le Regulatory Compliance Mark est une indication visible de la conformité d’un
produit avec toutes les dispositions réglementaires applicables de l’ACMA (Australian Communications and Media Authority), y compris toutes les exigences techniques et de conservation des informations en matière de sécurité électrique ou de compatibilité électromagnétique (EMC).
GARANTIE:Garantie limitée de deux (2) ans: Rendez-vous à PowerA.com pour en savoir.
CLASSE B D’INDUSTRIE CANADA:Cet appareil répond aux normes RSS-210 de l’Industrie Canada, qui régissent les appareils radio exempts de licence. Son fonctionnement est assujetti aux deux conditions suivantes:
(1) Cet appareil ne doit pas provoquer d’interférences et (2) cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer son mauvais fonctionnement. Cet appareil numérique de classe B est conforme à la norme ICES-003 du Canada.
ESPAÑOLCONFIGURACIÓN: 1. Conecte el adaptador de corriente alterna incluido
a la toma de corriente directa ubicada en la parte inferior de la Estación de carga.
2. Coloque la estación de carga en una toma de corriente cercana y de fácil acceso.
3. Conecte el adaptador de corriente alterna a un tomacorriente de pared.
CÓMO CARGAR LOS CONTROLES DUALSHOCK®4:La Estación de carga sirve para uno o dos controles DUALSHOCK®4.
• Acople el control DUALSHOCK®4 colocándolo sobre el receptáculo de carga de la Estación de carga y alineando los conectores de la estación de carga con la entrada de carga del control.
• Coloque el control DUALSHOCK®4 en el receptáculo de carga y presione hacia abajo. Se escuchará un clic en el receptáculo que indicará que el control está debidamente acoplado.
• Si el mando inalámbrico DUALSHOCK®4 que se está cargando no se encuentra actualmente conectado al sistema PlayStation®4, la barra luminosa del mando se iluminará en naranja para indicar que se está cargando. Cuando la carga haya terminado, la barra luminosa del mando se apagará. Si el mando inalámbrico DUALSHOCK®4 se encuentra actualmente conectado al sistema PlayStation®4, el color de la barra luminosa del mando no cambiará para indicar el estado de carga. El estado de carga se puede visualizar en la pantalla de inicio de PlayStation®4.
Para retirar el control DUALSHOCK®4, presione el control hacia abajo. El receptáculo liberará el control.
RESOLUCIÓN DE PROBLEMAS:Para ver las preguntas frecuentes actuales, visite www.PowerA.com/support.
P: No se están cargando mis controles.
R: Confirme que el adaptador de corriente alterna de la Estación de carga esté conectado tanto a la Estación de carga como al tomacorriente de pared.
R: Confirme que los controles estén bien acoplados a la Estación de carga.
R: Es posible que el control ya esté totalmente cargado.
ASISTENCIA:Para recibir asistencia en relación con accesorios POWER A auténticos, envíe un mensaje de correo electrónico a [email protected] o llame al (888) 664-4327 de 5 a.m. a 5 p.m., hora del Pacífico. PowerA, el logotipo de PowerA y “Amplify Your Experience” son marcas registradas de Bensussen Deutsch and Associates, Inc. TM y © Bensussen Deutsch and Associates, Inc.
Fabricado y distribuido bajo licencia de Sony Computer Entertainment America LLC. “PlayStation”, el logotipo de la familia “PS” y “DUALSHOCK” son marcas comerciales registradas y “PS4” es una marca comercial de Sony Computer Entertainment Inc.
GARANTÍA:Garantía limitada de 2 años: Visite PowerA.com para obtener detalles.
DEUTCHEINRICHTUNG:1. Das mitgelieferte Netzteil am DC-Eingang unten an
der Ladestation anschließen.
2. Platzieren Sie die Ladestation in der Nähe einer leicht zugänglichen Steckdose.
3. Das mitgelieferte Netzteil an einer Wandsteckdose anschließen.
DUALSHOCK®4-CONTROLLER LADEN:Mit der Ladestation können ein oder zwei DUALSHOCK®4-Controller geladen werden.
• Den DUALSHOCK®4-Controller so in die Aufnahme der Ladestation setzen, dass der Eingang des Controllers mit der Anschlussstelle der Ladestation verbunden ist.
• Dann den DUALSHOCK®4-Controller auf die Aufnahme der Ladestation drücken. Die Aufnahme rastet mit einem Klickgeräusch ein, wenn der Controller richtig in der Ladestation sitzt.
• Wenn der DUALSHOCK®4-Controller, der geladen wird, nicht an der PlayStation®4-Konsole angeschlossen ist, weist eine leuchtende orangefarbene Anzeige auf den Ladevorgang hin. Nachdem der Ladevorgang abgeschlossen ist, erlischt die Anzeige des DUALSHOCK®4-Controllers. Während der DUALSHOCK®4-Controller
an der PlayStation®4-Konsole angeschlossen ist, ändert sich die Anzeigefarbe nicht, d. h. es wird nicht auf den Ladezustand hingewiesen. In diesem Fall kann der Ladezustand über die PlayStation®4-Benutzeroberfläche überprüft werden.
Zum Herausnehmen auf den DUALSHOCK®4-Controller drücken. Daraufhin wird der Controller aus der Aufnahme freigegeben.
FEHLERBEHEBUNG:Die aktuelle Liste häufig gestellter Fragen finden Sie unter www.PowerA.com/support
F: Warum laden meine Controller nicht?
A: Vergewissern Sie sich, dass das Netzteil sowohl an der Ladestation als auch an der Wandsteckdose angeschlossen ist.
A: Vergewissern Sie sich, dass die Controller richtig in die Ladestation eingesetzt wurden.
A: Ihr Controller ist möglicherweise bereits vollständig geladen.
HILFE:Unterstützung für PowerA Originalzubehör erhalten Sie per E-Mail über PowerA@ bdainc.com oder telefonisch von 5.00-17.00 Uhr unter der Rufnummer +1 888 664-4327.
PowerA, das PowerA-Logo und „Amplify Your Experience“ sind Marken von Bensussen Deutsch and Associates, Inc. TM und © Bensussen Deutsch and Associates, Inc.
Herstellung und Vertrieb erfolgt unter Lizenz von Sony Computer Entertainment America LLC. „PlayStation“, das „PS“-Logo und „DUALSHOCK“ sind eingetragene Marken und „PS4“ ist eine Marke von Sony Computer Entertainment Inc.
GARANTIE:Beschränkte 2-jährige Garantie Details finden Sie auf www.PowerA.com.
ITALIANOCONFIGURAZIONE:1. Collegare l’adattatore CA in dotazione alla presa CC
situata nella parte inferiore della base di ricarica.
2. Posizionare la base di ricarica accanto a una presa a parete facilmente accessibile.
3. Inserire la spina dell’adattatore CA in dotazione in una presa d’alimentazione.
RICARICA DEI CONTROLLER DUALSHOCK®4:La base di ricarica può caricare uno o due controller DUALSHOCK®4.
• Caricare il controller DUALSHOCK®4 posizionandolo nell’apposito alloggiamento della base di ricarica e allineando i connettori della base di ricarica con quelli del controller.
• Posizionare il controller DUALSHOCK®4 nell’alloggiamento di ricarica e premere verso il basso. Un clic segnala il corretto posizionamento del controller nell’alloggiamento.
• Se il controller DUALSHOCK®4 in carica non è collegato alla PlayStation®4, si illumina di colore arancione a indicare lo stato di carica. Una volta terminata la carica, la luce del controller DUALSHOCK®4 si spegne. Invece, se il controller DUALSHOCK®4 è collegato alla PlayStation®4, il colore non cambia. Lo stato di carica può essere verificato tramite l’interfaccia della PlayStation®4.
Per togliere dalla base di ricarica il controller DUALSHOCK®4 premere sullo stesso in modo da liberarlo dall’alloggiamento.
RISOLUZIONE DEI PROBLEMI:Per le FAQ aggiornate visitare il sito www.PowerA.com/support
D: Perché il controller non si ricarica?
R: Verificare che l’adattatore CA della base di ricarica sia collegato alla base stessa e ad una presa di alimentazione.
R: Verificare che il controller sia correttamente posizionato sulla base di ricarica.
R: Il controller potrebbe già essere completamente carico.
ASSISTENZA:Per assistenza sugli accessori originali PowerA inviare
una e-mail a [email protected] o telefonare al numero (888) 664-4327 dalle ore 5.00 alle 17.00 (ora del Pacifico).
PowerA, il logo PowerA e “Amplify Your Experience” sono marchi di fabbrica di Bensussen Deutsch and Associates, Inc. TM e © Bensussen Deutsch and Associates, Inc.
Prodotto e distribuito su licenza da Sony Computer Entertainment America LLC. “PlayStation”, il logo della famiglia “PS” e “DUALSHOCK” sono marchi depositati, e “PS4” è un marchio di fabbrica di Sony Computer Entertainment Inc.
GARANZIA:Garanzia limitata di 2 anni: per ulteriori informazioni visitare PowerA.com.
PORTUGUÊSCONFIGURAÇÃO:1. Liga o adaptador de CA incluído à entrada de
CC localizada na parte inferior da estação de carregamento.
2. Coloque a estação de carregamento perto de uma tomada de parede de fácil acesso.
3. Liga o adaptador de CA incluído à tomada eléctrica.
CARREGAR OS COMANDOS DUALSHOCK®4:A estação de carregamento pode carregar um ou dois comandos DUALSHOCK®4.
• Acopla o comando DUALSHOCK®4 colocando-o na base da estação de carregamento e alinhando os conectores desta com a entrada de carregamento do comando.
• Coloca o comando DUALSHOCK®4 na base de carregamento e faz pressão para baixo. A base irá produzir um estalido para indicar que o comando se encontra devidamente acoplado.
• Se o comando DUALSHOCK®4 que estiveres a carregar não estiver ligado à consola PlayStation®4, irá acender-se com a cor laranja para indicar que está a carregar. Quando o carregamento estiver concluído, o comando DUALSHOCK®4 apaga-se. Se o comando DUALSHOCK®4 estiver ligado à consola PlayStation®4, a cor do comando não muda para indicar que está a carregar. O estado de carregamento pode ser verificado na interface da PlayStation®4.
Para retirares o comando DUALSHOCK®4, faz pressão sobre o comando. A base irá soltar o comando.
RESOLUÇÃO DE PROBLEMAS:Para consultares as Perguntas Frequentes actuais, visita www.PowerA.com/support
P: Porque é que os meus comandos não estão a carregar?
R: Confirma se o adaptador de CA da estação de carregamento está ligado à estação de carregamento e à tomada eléctrica.
R: Confirma se os comandos estão devidamente acoplados na estação de carregamento.
R: O teu comando pode já estar completamente carregado.
APOIO:Para obteres ajuda com acessórios originais da PowerA, envia um e-mail para [email protected] ou liga para (888) 664-4327 das 5 às 17 h (PST).
PowerA, o logótipo da PowerA e “Amplify Your Experience” são marcas comerciais da Bensussen Deutsch and Associates, Inc. TM e © Bensussen Deutsch and Associates, Inc.
Fabricado e distribuído sob licença pela Sony Computer Entertainment America LLC. “PlayStation”, o logótipo da família “PS” e “DUALSHOCK” são marcas comerciais registadas e “PS4” é uma marca comercial da Sony Computer Entertainment Inc.
GARANTIA:Garantia limitada de 2 anos: Visita PowerA.com para obteres detalhes.
