134 Hydraulic Drum Crusher/Compactor · Hydraulic Drum Crusher/Compactor Crushes 55-gallon steel...

DVD or VIDEOAVAILABLE


MODELNUMBER

DRUMCAPACITY

OVERALL SIZE(W x D x H)

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

DRUM-RACK-2 (2) 55 GAL. 45" x 30" x 25½" 1,600 60 $89.00DRUM-RACK-3 (3) 55 GAL. 71" x 30" x 25½" 2,400 95 138.00

DC-20/FC-50/0250♦

MODEL NUMBER

DRUM ROTATIONMETHOD

LIFTHEIGHT

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

HDC-450-60 HAND CRANK 60" 800 604 $1,701.00HDC-450-72 PULL CHAIN 72" 800 659 1,763.00HDC-450-84 PULL CHAIN 84" 800 709 1,872.00HDC-450-96 PULL CHAIN 96" 800 798 1,946.00HDC-DC 12V DC POWER UNIT OPTION 36 $610.00HDC-AC 115V AC POWER UNIT OPTION 36 610.00HDC-AIR AIR/OIL OPERATED POWER UNIT OPTION 36 431.00

DC-20/FC-100/250♦

MODEL NUMBER

ROTATIONMETHOD

LIFTHEIGHT

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

HDC-305-60 HAND CRANK 60" 800 483 $1,617.00HDC-305-72 PULL CHAIN 72" 800 517 1,682.00HDC-305-84 PULL CHAIN 84" 800 552 1,798.00HDC-305-96 PULL CHAIN 96" 800 572 1,875.00HDC-DC 12V DC POWER UNIT OPTION 36 $610.00HDC-AC 115V AC POWER UNIT OPTION 36 610.00HDC-AIR AIR/OIL OPERATED POWER UNIT OPTION 36 431.00

DRUMS MUST BE FULL TO ROTATE AT RATED CAPACITY DC-20/FC-100/250♦

MODELNUMBER DESCRIPTION

NET WT.(POUNDS)

LIST PRICEEACH

HDC-900-IDC DRUM CRUSHER/COMPACTOR 1641 $7,694.00HDC-24/7 CONTINUOUS DUTY RATING MOTOR 100 1,132.00HDC-DPN ALUMINUM DRIP PAN 31 139.00HDC9-1 SINGLE PHASE, 3HP POWER UNIT

(OPTION FOR HDC-900-IDC)(REQUIRES 50 AMP BREAKER) CYCLE TIME INCREASES TO APPROX 70 SECONDS

$976.00

DC-20/FC-100

134DR

UM, P

AIL

& C

YLIN

DER

EQUI

PMEN

T

Hydraulic Drum StackersThe Drum Stacker is perfect for positioning 55-gallon steel, plastic, and fiber drums horizontally on shelves. The solid steel construction provides stability during transit. Drums are held in place with a ratchet mechanism. Drums may easily rotate 360° with rotation method. Unit rolls easily on (2) 8" x 2" phenolic casters and (2) 5" x 2" swivel polyurethane casters. Comes standard with hydraulic foot pump. Optional power units available for the lifting operation.

Hydraulic Drum Crusher/CompactorCrushes 55-gallon steel drums to approximately 6” high and resets automatically to crush another drum in only 25 seconds. 38,000 pounds of crushing power. The included drum compacting feature allows you to compact contents inside the drum by simply removing the drum crushing platen. Crushing feature will work with any drum size up to 55-gallons. Compacting feature will only work with 55-gallon drums. This convenient design gives you two pieces of equipment in one. Safety features include a pressure relief valve, which prevents overload, and a door interlock system that will prevent the motor from running unless the door is closed. 6.5 hp motor is 208-230/460V, 3-phase, 60 hz. Meets OSHA and JIC standards. Built-in fork pockets aid in transporting. Aluminum Drip Pan, model HDC-DPN, is available for catching any excess liquid that may be expelled during the crushing operation. The pan holds 7½ gallons and measures 30"W x 20"D x 3"H.Crating is recommended for international shipments, contact factory.

Removable drum crushing platen and a two position key switch to select crush or compact. Weight 70 lbs.

Crushes 55-gallon steel drums to only 6" high.

Stackable Drum RacksThese steel racks have two-way fork truck access. Not recommended for stacking more than two racks high. All steel construction with ¼" formed steel cradles. Bolt together assembly with hardware included. Works well with the Hydraulic Drum Stacker and the Drum Positioner.

(2) model DRUM-RACK-2

model DRUM-RACK-3

Portable Hydraulic Drum Carrier/Rotator/BoomThe product allows one person to lift, transport, and dispense fully loaded 55-gallon steel drums with ease. It features a manual foot pump hydraulic lift and rolls on 4" rear swivel casters and 8" front rigid wheels. There is a hand crank on the 60" model and chain rotation on the other models to rotate the drum 360°. All models feature a boom attachment which stores on the outriggers. Optional power units available for the lifting operation. See page 136 for options to handle plastic and fiber drums.

BOOM ATTACHMENT shown in use above and stored position below.

Shown with optional 12V DC power unit


PORTABLE HYDRAULIC DRUM DUMPERSMODEL

NUMBERDUMP

HEIGHTROTATION

HEIGHTLEVEL

HEIGHTCAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

HDD-36-7-P 36" 91¾" 60¼" 750 798 $2765.00HDD-48-7-P 48" 113¾" 72¼" 750 871 2905.00HDD-60-7-P 60" 134¼" 84¼" 750 966 3037.00HDD-72-7-P 72" 155¾" 97¼" 750 1008 3153.00HDD-36-10-P 36" 91¾" 60¼" 1,000 819 2983.00HDD-48-10-P 48" 113¾" 72¼" 1,000 892 3115.00HDD-60-10-P 60" 134¼" 84¼" 1,000 997 3245.00HDD-72-10-P 72" 155¾" 97¼" 1,000 1039 3361.00HDD-36-15-P 36" 91¾" 60¼" 1,500 960 3329.00HDD-48-15-P 48" 113¾" 72¼" 1,500 1023 3485.00HDD-60-15-P 60" 134¼" 84¼" 1,500 1128 3631.00HDD-72-15-P 72" 155¾" 97¼" 1,500 1176 3758.00STATIONARY HYDRAULIC DRUM DUMPERSHDD-36-7-S 36" 91¾" 60½" 750 735 $2549.00HDD-48-7-S 48" 112¼" 72½" 750 876 2688.00HDD-60-7-S 60" 132¾" 84½" 750 971 2821.00HDD-72-7-S 72" 153" 96" 750 1013 2938.00HDD-36-10-S 36" 91¾" 60½" 1,000 824 $2768.00HDD-48-10-S 48" 112¼" 72½" 1,000 897 2902.00HDD-60-10-S 60" 132¾" 84½" 1,000 1002 3027.00HDD-72-10-S 72" 153" 96" 1,000 1055 3146.00HDD-36-15-S 36" 91¾" 60½" 1,500 966 $3112.00HDD-48-15-S 48" 112¼" 72½" 1,500 1029 3268.00HDD-60-15-S 60" 132¾" 84½" 1,500 1134 3414.00HDD-72-15-S 72" 153" 96" 1,500 1186 3545.00

STANDARD POWER IS 120V 1 PHASE AC DC-20/FC-100♦OPTIONAL 12V DC POWER WITH ON-BOARD CHARGER, MODEL HDD-DC, N/COPTIONAL 5-GALLON PAIL ADAPTOR FINGERS, MODEL HDD-5GF, $62.00

UPGRADE TO STAINLESS STEEL CHUTE (must be ordered with above drum dumpers)CAPACITY 750 POUNDS CAPACITY 1,000 POUNDS CAPACITY 1,500 POUNDS

MODELNUMBER

LIST PRICEEACH

MODELNUMBER

LIST PRICEEACH

MODELNUMBER

LIST PRICEEACH

SSC-36-7 $1,140.00 SSC-36-10 $1,325.00 SSC-36-15 $1,497.00SSC-48-7 1,227.00 SSC-48-10 1,411.00 SSC-48-15 1,606.00SSC-60-7 1,319.00 SSC-60-10 1,511.00 SSC-60-15 1,700.00SSC-72-7 1,557.00 SSC-72-10 1,717.00 SSC-72-15 1,882.00

PORTABLE LIFT AND DUMP DRUM DUMPERS (40° DUMP ANGLE)MODEL

NUMBERDUMP HEIGHT(MIN / MAX)

ROTATION HEIGHT

LEVEL HEIGHT

CAPACITY(POUNDS)

FRAME(W x L)

NET WT.(POUNDS)

LIST PRICEEACH

HLD-94-10-P 48" / 94" 166" 87" 1,000 44" x 69" 1372 $7,136.00HLD-116-10-P 60" / 116" 195" 87" 1,000 44" x 77" 1460 7,641.00HLD-94-15-P 48" / 94" 166" 87" 1,500 44" x 69" 1392 $7,478.00HLD-116-15-P 60" / 116" 195" 87" 1,500 44" x 77" 1480 8,009.00STATIONARY LIFT AND DUMP DRUM DUMPERS (45° DUMP ANGLE)HLD-94-10-S 48" / 94" 165" 86" 1,000 44" x 58" 1434 $6,848.00HLD-116-10-S 60" / 116" 194" 86" 1,000 44" x 66" 1522 7,351.00HLD-94-15-S 48" / 94" 165" 86" 1,500 44" x 58" 1454 $7,188.00HLD-116-15-S 60" / 116" 194" 86" 1,500 44" x 66" 1542 7,719.00

DC-20/FC-100♦

135DRUM

, PAIL & CYLINDER EqUIPM

ENTHydraulic Drum DumpersThe Hydraulic Drum Dumper is what you need to dump drums that weigh up to 1,500 pounds. Works with 55 and 30-gallon plastic, steel, and fiber drums. The unit has a solid steel chute. Portable units have two rigid and two swivel casters with floor lock screws. All steel construction.Standard features include: 56 frame, ¾ HP motor, 120V single phase, 60hz with an 8 foot long power cord and plug. Upper travel limit switch, emergency brass safety velocity fuse in cylinder, and vertical adjustment drum restraints are standard. Chute is rotated with a hand held control on an 8 ft. long coil cord standard.SSC upgrade is constructed with type 304 Stainless Steel in a Mill Finish. Includes stainless steel chute and base plate. Chute is painted with Steel-It™ coating on back of chute. Adjustable height clamps are stainless steel. Frame is painted enamel blue. This option must be ordered with Drum Dumper.

SSC option includes a 304 Stainless Steel chute in Mill Finish. Chute includes Steel-It™ coating standard on any mild steel welded to back of chute. Adjustable height clamps are stainless steel. Frame is painted enamel blue.

This option must be ordered with aHydraulic Drum Dumper.

SPECIALTY POLISHESAND FINISHES

Contact Factory for Pricing

45° DUMP ANGLE(135° TOTAL ROTATION)

Lift-and-Dump Hydraulic Drum DumpersThe Lift-and-Dump Hydraulic Drum Dumper is what you need to dump drums at variable heights. The HLD works similarly to the HDD but includes a lift cylinder that allows you to dump at various heights. Features a (4) push button pendant which allows the operator full independent control of both lift height and the dump angle. 120V 1-phase power standard.

Image shows 304 Stainless Steel chute in Mill Finish. FDA White powder coat option is FDA approved for incidental food contact.

Custom FinishAvailable

New



MODELNUMBER

CRANK TURNSPER 90° ROTATION

ROTATIONMETHOD

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

DCR-205-8� 10 15' CHAIN 800 221 $501.00DCR-205-15� 10 15' CHAIN 1,500 259 612.00DCR-205-20 15 15’ CHAIN 2,000 280 1,840.00

OPTIONAL 12V DC POWERED OPERATION (1,200 lbs. maximum capacity), suffix DC, $1,582.00 DC-20/FC-70DRUM MUST BE FULL TO ROTATE AT RATED CAPACITY

MODEL NUMBER

ACCEPTABLEDRUM TYPES

ROTATION METHOD

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

DCR-110-55 55-GALLON STEEL MANUAL 800 159 $294.00DRUM MUST BE FULL TO ROTATE AT RATED CAPACITY DC-20/FC-70♦

MODELNUMBER


ROTATIONMETHOD

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

DCT-75 55-GALLON STEEL 10' CHAIN 800 97 $353.00DCT-85 55-GALLON STEEL 10' CHAIN 1,500 102 516.00

DRUM MUST BE FULL TO ROTATE AT RATED CAPACITY DC-20/FC-70

MODEL NUMBER DESCRIPTION

NET WT.(POUNDS)

LIST PRICEEACH

FDA-800� FIBER DRUM ADAPTER 14 $165.00FDA-550 ADJUSTING ARM (SOLD SEPARATELY) 24 114.00FDA-250 NYLON STRAP (SOLD SEPARATELY) 12 36.00FDC-30 STEEL SADDLE 36 146.00FDRS DUAL RATCHET STRAP (FACTORY INSTALLED ONLY) 12 109.00

DC-20/FC-70


CAPACITY(POUNDS)

NET WT.(LBS.)

LIST PRICEEACH

DRUM-P-55 55-GALLON STEEL DRUMS 800 321 $832.00DRUM-P-30 30-GALLON STEEL DRUMS 800 315 830.00DRUM-P-55-SB Spacer for use on drums with drum faucets installed 4 $63.00 pr.

DRUM-P-30-SB Spacer for use on drums with drum faucets installed 4 61.00 pr.

DC-20/FC-70

136DR

UM, P

AIL

& C

YLIN

DER

EQUI

PMEN

TFork Truck Drum Carrier/RotatorsThis product allows you to easily transport and rotate 55-gallon steel drums using a fork truck. Drums are held securely in place by a durable chain locking system. Each unit is provided with a 15 foot long chain to allow the drum to be rotated up to 360° from the fork truck operator's seat. Fork pockets measure 7½" wide by 2½" high usable. Safety chain is used to secure unit to fork truck. Bung Nut Wrench, model BNW-I, is also included for opening and closing drums.

Manual Drum Carrier/RotatorHere is an efficient, economical way to handle 55-gallon steel drums. Sturdy handle provides leverage for heavy lifting and easily locks drum in position 5" to 11" off floor. Drum rotates 360°. Rolls smoothly on 8" front wheels and a 4" rear swivel caster. Not for use with drums on pallets.

Hoist Mounted Drum Carrier/RotatorsRotate and position a fully loaded 55-gallon steel drum with ease. Best when used with an overhead hoist. Features a chain crank that allows the operator to rotate 360° drums that are out of reach. Drums are held in place with a drum locking system.

Plastic & Fiber Drum Adapters and UpgradesDesigned to hold and support fiber and plastic drums. Each adapter can be utilized in conjunction with models HDC-305, DCR-205, DCR-110, and DCT.Model FDA-800 comes complete with both an adjusting arm and a high strength nylon strap. Fits drums measuring 12" to 21" in diameter and 28" to 36" high.30-gallon Adapter, model FDC-30, attaches to the inner rim of the drum saddle so a 30-gallon steel drum can be used.Dual Ratchet Strap, model FDRS, accommodates 30 and 55-gallon drums.

ADJUSTING ARMmodel FDA-550

NYLON STRAPmodel FDA-250

STEEL SADDLEmodel FDC-30

DUAL RATCHET STRAPmodel FDRS

CHAIN CONTAINER

See below for options to handle plastic and fiber drums.

Newmodel DCR-205-20

model DCR-205-8DCR-205-15

Drum PositionersAllows fork truck driver to rotate standing drums to the horizontal racking position and vice-versa. Positive latching system ensures safe handling of drums weighing up to 800 lbs. Slide the positioner extensions over the vertical drum. With the aid of the Drum Positioner, rotate drum to horizontal position. Latching system will engage to allow horizontal positioning of drum. It’s now ready to slide into the rack. Mechanical operation relies on fork truck to rotate and lift drums. Fork pockets measure 6½"W x 2½"H usable on 19½" centers.


MODEL NUMBER

NUMBER OF DRUMS

CAPACITY(POUNDS)

OVERALL SIZE(W x L x H)

NET WT.(POUNDS)

LIST PRICEEACH

FMDL-1� 1 1,000 26½" x 46½" x 29" 240 $716.00FMDL-2� 2 2,000 42" x 49½" x 29" 340 980.00

DC-20/FC-70



NET WT.(LBS)

LIST PRICEEACH

DFDL-3� DELUXE COMBO DRUM LIFTER 26½" x 52" x 30" 313 $1,038.00DC-20/FC-70


CAPACITY(POUNDS)


NET WT.(POUNDS)

LIST PRICEEACH

FPDL-8-L� BOTTOM GRIP 800 26½" x 56½" x 23" 160 $468.00FPDL-11-H� TOP GRIP 1,100 26½" x 48½" x 23" 185 595.00

DC-20/FC-70

MODELNUMBER


CAPACITY(POUNDS

OVERALL SIZE( W x L x H)

NET WT.(POUNDS)

LIST PRICEEACH

FMDL-850* (1) STEEL, POLY OR FIBER 750 31" x 34" x 35" 160 $612.00FMDL-1500 (1) STEEL, POLY OR FIBER 1,500 33" x 47" x 37" 340 1,811.00FMDL-2000 (1) STEEL, POLY OR FIBER 2,000 33" x 47" x 37" 366 2,692.00FMDDL-1700* (2) STEEL, POLY OR FIBER 1,500 38" x 34" x 35" 207 $1,150.00FMDDL-3000 (2) STEEL, POLY OR FIBER 3,000 33" x 47" x 37" 430 3,181.00FMDDL-4000 (2) STEEL, POLY OR FIBER 4,000 33" x 47" x 37" 483 4,846.00

* LIGHT-DUTY UNIT TO HANDLE 100 OR FEWER DRUMS PER MONTH DC-20/FC-70

137DRUM


ENTAutomatic Eagle Beak™ Drum LiftersThis time tested and proven design allows a fork truck operator to easily secure, move, and release drums without leaving the seat of the fork truck. For use with open and closed head 30 and 55-gallon plastic, steel and fiber drums with a top lip strong enough to support the weight of the drum. Choose single-drum or double-drum configuration. Includes safety chain and T-locks to secure unit to the fork truck. Welded steel construction. Powder coat finish. Fork pockets measure 6½" wide x 2½" high usable.

Deluxe Combination Fork Mounted Drum LifterDeluxe Combination Fork Mounted Drum Lifter includes attachments to lift any type of drum; 30 and 55-gallon, steel, plastic, fiber, and open or closed head drums. Includes single Eagle Beak™ unit and both bottom and top lip Poly Drum Lifters. Capacity will vary depending upon which attachment you are using. Fork pockets have an inside measurement of 6½" wide by 2½" high. Includes safety chain and T-locks for securing unit to fork truck. Welded steel construction. Powder coat finish.

Fork Mounted Poly Drum HandlersThese easy to use plastic drum handlers are designed to handle odd-shaped plastic drums. Includes safety chain and T-locks for securing unit to the fork truck. Durable powder coat finish.

Model FPDL-8-L has adjustable arms that are designed to fit 55-gallon round bottom plastic drums. Low drum attachment point allows for use with both open and closed head drums.Model FPDL-11-H is a top lip plastic drum lifter for use with 30 and 55-gallon plastic closed head drums. 6½" wide x 2½" high usable fork tubes on 19½" centers. High drum attachment point for use with top lip at least 3/16" high. Will also work with steel and fiber drums.

model FMDL-2

model FMDL-1

model FPDL-8-L

model FPDL-11-H

Fork Mounted Drum LiftersFork truck attachments utilize a light duty single automatic clamping mechanism for handlingany size steel or plastic chimed drum. Scales available, contact factory.

Model FMDL-850 is a knockdown unit that bolts together. Fork pockets and safety chain provide quick and easy installation.

Model FMDDL-1700 attaches to the carriage of most fork trucks and walkie stackers.

The following are fork mounted drum lifters that enable fork truck operators to install or remove the attachment in seconds without any tools. Totally enclosed fork pockets with attached safety chain and cam lock secures the attachment to the fork truck.

FMDL-1500 & FMDDL-3000 - Fork truck attachments utilize a heavy-duty single automatic clamping mechanism for handling steel, fiber, and plastic chimed drums in high volume applications.

Models FMDL-2000 & FMDDL-4000 feature heavy-duty double articulating clamping mechanisms for handling any steel, plastic, or fiber chimed drums in high volume applications. Each drum is gripped with two upper and lower jaws in heads that are spaced about 6 inches apart.

model FMDL-1500model FMDL-850

model FMDL-2000model FMDDL-3000

model FMDDL-4000




MODEL NUMBER

ACCEPTABLEDRUM SIZE

CAPACITY(POUNDS)


FORK POCKET CENTERS

FORK POCKETSIZE (W x H)

NET WT.(POUNDS)

LIST PRICEEACH

DGS-A (1) 30 & 55-GALLON 800 26" x 35" x 8" 13½" 7¼" x 2½" 105 $190.00DGS-55-D (1) 55-GALLON 1,500 28¼" x 24" x 8" 13½" 6¼" x 2" 109 223.00DGD-A (2) 30 & 55-GALLON 1,500 45" x 36" x 8" 24" 7¼" x 2½" 96 $246.00DGD-55-D (2) 55-GALLON 2,000 46" x 24¼" 9½" 24" 7¼" x 2¼" 185 278.00

DC-20/FC-70

MODEL NUMBER

ACCEPTABLEDRUM SIZES

CAPACITY(POUNDS) OPERATION

NET WT.(POUNDS)

LIST PRICEEACH

DRUM-HYD-1 55 & 30-GALLON 1,000 12V DC 525 $2,687.00DC-20/FC-70

MODEL NUMBER

ACCEPTABLEDRUM SIZES

USABLEFORK OPENING

NET WEIGHT(POUNDS)

LIST PRICEEACH

FDG-55 55-GALLON 6½"W x 2½"H 45 $129.00FDG-30 30-GALLON 6½"W x 2½"H 45 129.00

DC-20/FC-70

MODELNUMBER ACCEPTABLE DRUM SIZE

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

HORIZ-70 55-GALLON STEEL DRUMS 650 191 $296.00DC-20/FC-70

MODELNUMBER


LIFTHEIGHT

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

DC-550 33" x 33¾" x 63" 2¼" 550 140 $445.00DC-20/FC-70♦

138DR

UM, P

AIL

& C

YLIN

DER

EQUI

PMEN

TDrum Grippers The Drum Gripper makes it easy to pick up one or two steel drums without leaving the seat of the fork truck. Simply slip the forks into the fork tubes and the Drum Gripper is ready to go. The knuckle gripping system is lowered around the drum, gripped tightly, and then lifted into the air. Drum is automatically released by lowering the forks. All models feature hinged folding design for storage. Models DGS-A and DGD-A feature adjustable-width arms for use with both 30-gallon and 55-gallon steel drums. Welded steel construction. Powder coat finish.

Electric Hydraulic Fork Mounted Drum Grippers When the maximum in performance and control is required. The Electric Hydraulic Fork Mounted Drum Grippers accommodate 30 and 55-gallon steel, plastic, and fiber drums. Available in single or double drum designs. 12V DC power standard. Battery included. Allows for lifting and moving of drums in the vertical position only. Includes hand control on coil cord for controlling the gripping arms from the seat of the fork truck. Safety chain is included to secure the gripper to the fork truck. Welded steel construction. Painted finish.

model DGS-A model DGD-AmodelDGS-55-D

modelDGD-55-D

model DRUM-HYD-1

Horizontal Drum CarrierDesigned to load and unload open or closed head drums horizontally in racks. "T" handle locks secure cradle to the forks to maximize safety and productivity. Drum lock engages and disengages automatically as a function of the fork angle. Fork pockets measure 7½" wide by 2½" high usable.

Fork Mounted Drum Grippers Designed for use with fork trucks fitted with hydraulic lateral fork positioners only. Easily attaches to your forks for easy drum positioning. Available for use with 30 and 55-gallon steel drums. Usable fork openings are 6½"W x 2½"H. Secure to forks with friction-lock screw mechanism. Welded steel construction.

New

Drum ControllerTransport 55-gallon steel drums from work area to work area with the heavy-duty Drum Controller. This unit lifts drums off the ground 2¼" with minimal effort (all this is done without straps or ratchet). To lift drums, center the arms around the drum below the upper rib then pull the handle down. Inside straddle width is 25". Unit rolls smoothly on 8" x 2" phenolic casters. Steel construction.


MODELNUMBER


RAISEDHEIGHT

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

MANUAL OPERATIONDRUM-LRT 36¼" x 61" x 88" 68" 550 402 $1,156.0012V DC POWERDRUM-LRT-DC 36¼" x 61" x 88" 64" 550 629 $2,806.00

DC-20/FC-92.5♦

MODELNUMBER

OVERALL SIZE(W x D)

LIFTHEIGHT

CAPACITY(POUNDS)

NET WT.(LBS.)

LIST PRICEEACH

DRUM-55-36 34¾" x 29" 18" 500 168 $619.00DRUM-55FP 43½" x 39" 20" 1,000 373 2,330.00DRUM-55S 29" x 41" 4" 1,000 180 582.00DRUM-55-PY 29" x 41" 4" 660 220 655.00DRUM-SCLG DRUM-55FP WITH GENERAL READOUT SCALE 389 $63.09DRUM-SCLF DRUM-55FP WITH INTRINSICALLY SAFE READOUT SCALE 397 73.89

DC-20/FC-92.5


JAW SERVICERANGE

CAPACITY(POUNDS)

NET WT.(LBS.)

LIST PRICEEACH

DCR-880-M� HAND RATCHET 27" TO 47" 880 170 $712.00DCR-880-H� FOOT PUMP 27" TO 47" 1,500 190 812.00DCR-880-H-HP� FOOT PUMP 27" TO 74" 880 240 889.00DCR-SCALE WEIGHT SCALE ADD-ON 70 $1,198.00

DC-20/FC-70♦

139DRUM


ENTPortable Drum Lifter/Rotator/Transporter The multifunctional unit, model DRUM-LRT, features a hand pump to lift drums from ground level to a raised height of 68" to bottom of drum in horizontal position. For use with 55-gallon steel, plastic, and fiber drums. A hand crank gear mechanism provides the controlled 360° rotation of the drum. A floor lock is standard to stabilize the unit in a fixed position. Model DRUM-LRT-DC has a 12V DC battery powered lift operation and a hand crank gear mechanism rotation (on-board charger standard). Minor assembly required.

Economical Mechanical Drum TransportersUnique portable unit designed to lift and transport plastic, steel, and fiber drums with a top lip. Steel jaw securely grips the top lip of the drum. Available with either a manual mechanical ratchet or a foot pump hydraulic lift mechanism. Straddle legs rotate for access to drums on pallets. Unit rolls on (4) 8" x 2" phenolic casters. The push handle folds down for easy access to ratchet and foot pump. All welded steel construction. Powder coated with a safety yellow finish. Optional scale weighs drums to an accuracy of +/-0.5 lbs. Optional scale includes (6) D cell batteries and an AC adaptor.

modelDCR-880-M

modelDCR-880-H

HAND PUMP LIFTmodel DRUM-LRT

DC POWER LIFTmodel DRUM-LRT-DC

modelDCR-880-H-HP

Portable Drum JacksThese Drum Jacks are the perfect solution to any of your drum transporting needs. Compact design allows for maximum maneuverability in restrictive areas. All steel construction.

Model DRUM-55-36 accepts both 30 and 55-gallon plastic, steel, and fiber drums with a top lip. The front rigid wheels are 6" x 2”, while the rear swivel casters are 3" x 1½".

Model DRUM-55FP has an adjustable beak design which allows it to grab 30 and 55-gallon steel, plastic, or fiber drums. Drums can easily be placed on or removed from pallets, spill containers, and scales. Available with built-in scale feature, see below.

Model DRUM-55S has a unique grapple to hold 55-gallon drums securely into the steel saddle prior to lifting it vertically. The drum is held in this position during transit, enabling open drums to be handled without spillage.

Model DRUM-55-PY has the capability to move plastic drums conveniently with minimum effort.

Model DRUM-SCLG & DRUM-SCLF have a scale readout built into Drum Jack model DRUM-55FP. The scale allows the drum to be weighed and moved all with the same piece of equipment. The scale features a capacity of 1,000 pounds with an accuracy of +/-0.5 lbs. 12V DC operation with battery and charger included. Stainless steel scale components. NEMA 4 scale read-out housing swivels 360° for maximum viewing convenience.

model DRUM-55-36model DRUM-55FP

model DRUM-55Smodel DRUM-55-PY

model DRUM-SCLF

model DRUM-55FPSHOWN WITH SCALE,

model DRUM-SCLF

model DRUM-SCLG

New

modelDCR-SCALE

MODELNUMBER

STRADDLE(W x D)

CAPACITY(POUNDS) WHEEL TYPE

NET WT.(POUNDS)

LIST PRICEEACH

LO-DC-MR� 26" x 16" 1,000 MOLD-ON-RUBBER 38 $98.00LO-DC-CI� 26" x 16" 1,200 STEEL 40 110.00LO-DC-PU� 26" x 16" 1,200 POLY-ON-STEEL 38 98.00LO-DC-PH 26" x 16" 1,200 PHENOLIC 38 118.00

DC-20/FC-70

MODELNUMBER

OVERALL SIZE(W x L)

WHEELTYPE

NET WT.(POUNDS)

LIST PRICEEACH

DBT-1200 24½" x 60" RUBBER-ON-STEEL 58 $166.00DBT-1200-P 24½" x 60" POLY-ON-STEEL 61 137.00DBT-RED 24¼" x 60¼" POLYURETHANE 60 $154.00

DC-20/FC-100

MODELNUMBER


WHEELTYPE

NET WT.(POUNDS)

LIST PRICEEACH

DBT-SA-MR 22" x 24" x 60½" MOLD-ON-RUBBER 58 $280.00DBT-SA-PO 22" x 24" x 60½" POLY-ON-STEEL 61 259.00

DC-20/FC-70

MODELNUMBER


CAPACITY(POUNDS)

WHEELTYPE

NET WT.(POUNDS)

LIST PRICEEACH

DCHT-1 20" x 57" x 20" 1,000 16" DIA. x 4"W 59 $379.00DC-25/FC-70

MODELNUMBER


CAPACITY(POUNDS)

WHEELTYPE

NET WT.(POUNDS)

LIST PRICEEACH

DBT-1000 22-1/2" x 24-3/8" x 59" 1,000 POLY-ON-STEEL 62 $206.00DC-20/FC-100

140DR

UM, P

AIL

& C

YLIN

DER

EQUI

PMEN

TLo-Profile Drum Caddies with Bung Wrench HandleReduce injuries caused by manually lifting and moving drums. Transport (1) 55 or 30-gallon drum or (2) 5-gallon pails with the Lo-Profile Drum Caddy. To use: align unit in front of drum, remove handle, and grip drum with the handle. Tip drum up while guiding the caddy base under the drum. Re-attach handle and transport drum to desired location. Unit rolls easily on two 6" x 2" rigid wheels and one 3" x 1" swivel caster. The removable handle doubles as a bung nut wrench and seal remover. Cradle height is ½". Inside cradle diameter is 23½". Steel construction. Yellow painted finish.

Barrel/Drum TrucksThe Barrel/Drum Truck handles 30 and 55-gallon steel and fiber drums that are 24" to 48" high. Adjustable chime hook helps to secure the drum. Wheels measure 12" x 2" and are available in rubber-on-steel or polyurethane-on-steel. Capacity is 800 pounds.

RUBBER-ON-STEEL WHEELS

model DBT-1200POLY-ON-STEEL WHEELS

model DBT-1200-P

Drum Truck with Spring AssistHand truck designed for moving 55-gallon steel, plastic, and fiber drums. Special design features spring mechanism for easy use. Spring allows for easier tilting of fully-loaded drums. Removable hook bar includes built-in bung nut wrenches. Steel construction with powder coat yellow finish. 10" x 2" wheels standard.

New

Multi-Purpose Drum & Hand TruckMulti-purpose unit serves as a drum truck, drum cradle, and a hand truck. Extra-long handles give leverage for access to drums on pallets. Unit lies horizontally for use as a drum cradle to empty drum contents. Steel nose plate and drum tines are interchangeable. Features large 16" diameter full-pneumatic wheels for use over rough terrain. Includes built-in bung nut wrench. Ships fully assembled ready for immediate use.

New

Deluxe Tilt Back Drum TruckMove, tilt and unload heavy 30 or 55-gallon steel drums with ease. A foot rest helps in loading and supports a loaded drum truck. It rolls easily and quietly on 10" x 2" poly-on-steel wheels. Deluxe chime gripper for quick and easy drum transportation.

New

POLYURETHANEmodel DBT-RED

New

MODELNUMBER


CAPACITY(POUNDS)

WHEELTYPE

NET WT.(POUNDS)

LIST PRICEEACH

RDBT-MR 21" x 58" x 20" 1,000 MOLD-ON-RUBBER 70 $242.00RDBT-SS 21" x 58" x 20" 1,000 STEEL 72 263.00RDBT-PO 21" x 58" x 20" 1,000 POLYOLEFIN 70 232.00RDBT-PAN OPTIONAL DRIP PAN 2 $37.00

DC-20/FC-70

MODELNUMBER

CAPACITY(POUNDS)

WHEELSIZE

WHEELTYPE

NET WT.(POUNDS)

LIST PRICEEACH

RDC-1000-5PU 1,000 5" POLY-ON-STEEL 58 $144.00RDC-1000-5PO 1,000 5" POLYOLEFIN 58 125.00RDC-1000-5SS 1,000 5" STEEL 60 129.00RDC-1000-DPN OPTIONAL DRIP PAN 2 $37.00

DC-20/FC-70

MODELNUMBER

CAPACITY(POUNDS)

WHEELSIZE

WHEELTYPE

NET WT.(POUNDS)

LIST PRICEEACH

RDC-60-NC 800 -- NONE 27 $78.00RDC-60-5-HR 800 5" HARD RUBBER 32 153.00RDC-60-5-PO 800 5" POLYOLEFIN 32 110.00RDC-60-5-SS 800 5" STEEL 34 126.00RDC-60-HDL OPTIONAL HANDLE 6 $18.00RDC-60-DPN OPTIONAL DRIP PAN 2 37.00

DC-20/FC-70



CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

RDC-100� CART/ DISPENSER 21" x 37" x 25" 1,000 60 $188.00DC-20/UPS/FC-100/250

141DRUM


ENTMulti-Purpose Drum Truck/CradleOne of the most versatile drum trucks in the industry. This innovative product allows the operator to easily tip back the truck in order to transport drums ergonomically on four wheels. Unit doubles as a drum cradle for storage and dispensing all in one. Top angle is 3 degrees when used as a Drum Cradle. This unique design also allows the operator to place drums and retrieve off of a pallet. Accommodates 55-gallon steel, plastic, or fiber drums. Rolls smoothly on (2) 8" x 2", and (4) 6" x 2" wheels. Standard with a wheeled undercarriage that positions the drum horizontally for drainage or storage. The drum height is 14¾” high and a drip pan is available. An integral self-storing bung wrench is standard. This attractive feature not only opens numerous drums, but helps to keep the drum snug on the truck. A convenient kickstand allows for upright storage. Powder coat finish.

New

Deluxe Rotating Drum CartsPractical design is easy to operate and features a capacity of 1,000 pounds. Includes two rigid and two swivel casters. Two retractable wooden handles included for easy operation. Steel stops enable operator to hold drum during tipping operation and includes a built-in bung nut wrench as a bonus. Rugged steel construction with painted finish. Assembly required.

Economy Rotating Drum CartsEasy to operate. Includes two rigid and two swivel casters. Handle is NOT included -- must be purchased separately. Optional handle includes bung nut wrench and a built-in drum tipper to assist with liquid drainage. Rugged steel construction with painted finish. Assembly required.

Revolving Drum CartsThese carts are designed to rotate 55-gallon drums from the vertical position to the horizontal position so their contents may be emptied. Simple one-person operation. Steel construction. Powder coat finish.

Model RDC-100 is equipped with rollers for mixing. Includes a built in drip pan to provide a clean safe work floor. Rolls on two 3" swivel casters and two 5" rigid casters.

Model RDC-60 ships knockdown via parcel carrier for lower shipping costs. 2½" x 1¼" cast aluminum wheels.

model RDC-100

RDC-1000-5PU

RDC-1000-DPN

RDC-60-NC

RDC-60-5-HR

RDC-60-HDL

MODELNUMBER

DRUMSACCEPTED


SUMPCAPACITY

CAPACITY(POUNDS)

NET WT.(LBS.)

LIST PRICEEACH

DRUM-4848•* 4 48" x 48" x 6" 0 gal. 3,500 79 $158.00VLPDP-2448•• 2 24" x 48" x 2¼" 9 gal. 1,600 24 (UPS) $145.00VLPDP-4848•• 4 48" x 48" x 2¼" 18 gal. 3,200 40 251.00DR-1-DP 1 36" x 36" x 16" 61 gal. 800 40 $272.00DR-2-DP 2 26¼" x 50" x 16" 40 gal. 1,600 40 321.00DR-3-DP 3 26¼" x 76" x 11" 65 gal. 2,400 60 371.00DR-4-DP 4 49" x 49" x 16" 110 gal. 3,200 80 445.00SCC-55 1 30¼" x 26" 65 gal. 800 20 $132.00SCC-2-55 2 31½" x 22½" 120 gal. 1,600 48 161.00

DC-20/DC-25*/FC-100•/FC-150••


CASTERTYPE

CAPACITY(POUNDS)

NET WT.(LBS.)

LIST PRICEEACH

DRUM-SP-32-12-C 32" DIA. STEEL 1,200 59 $81.00DRUM-SP-32-9-H 32" DIA. HARD RUBBER 900 57 67.00DRUM-SP-28-12-C 27½" DIA. STEEL 1,200 54 78.00DRUM-SP-28-9-H 27½" DIA. HARD RUBBER 900 51 63.00SCC-55 CONTAINER -- 55 (gal) 25 $132.00SCC-CVR COVER/LID -- -- 12 69.00

DC-20/FC-70


SUMPCAPACITY

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

VCRD STATIONARY 41-GALLONS 800 30 $172.00VCRD-P PORTABLE 30-GALLONS 800 45 334.00

DC-20/FC-125

142DR

UM, P

AIL

& C

YLIN

DER

EQUI

PMEN

T

model VCRD-P

Poly Drum CradlesDispense drum contents into smaller containers and avoid messy clean-ups with our Poly Drum Cradles. The horizontal drum cradle collection system captures all spills and leaks and stores them in the interior of the hollow cradle for reuse or safe, clean disposal. 2" NPT drain plug is standard. Fork entry measures 6" x 3". Made from 100% virgin polyethylene.

Model VCRD-P features retractable handles for tilting and positioning drums. Includes a round contoured lower back for easier rotation of drums from horizontal to vertical position and 6" x 2" polyolefin wheels.

Plastic Pallets & Drum Spill ContainersModel DRUM-4848 is constructed from 100% polyethylene. Move drums from workstation to workstation with a fork truck or pallet truck. Holds (4) 55-gallon drums. Features: 4-way entry, reversible and holes for drainage.

Low Profile Spill Decks are designed to catch spills. Model VLPDP-2448, has a volume capacity of 9-gallons, while model VLPDP-4848 has an 18-gallon volume capacity. Manufactured from chemical resistant polyethylene. Removable decking standard.

Drum Spill Pallets, series DR, industrial strength molded polyethylene pallets with unique patented grid pattern drainage deck capture container spills and leaks of expensive materials for reuse. Unique design minimizes sloshing when transporting. Excellent for collecting most hazardous products. Dozens of applications when coordinated with many other containment products.

Drum Containment Units, series SCC, are specially designed to contain leaks and spills from 55-gallon drums during plant transport and storage. Either a fork truck or Overpack Drum Dolly can be used to transport the containment units.

model VCRD

model DRUM-4848

series VLPDP

Overpack Drum Dollies & ContainersTransport containment units with Overpack Drum Dollies, series DRUM-SP. Designed to hold drum spill containers. These dollies roll smoothly on four swivel casters. Steel construction. Powder coat finish.

The Containment Units, series SCC, are specially designed to contain leaks and spills from 55-gallon drums during plant transport and storage. Either a fork truck or Overpack Drum Dolly can be used to transport the containment units.

OVERPACK DRUM DOLLYseries DRUM-SP

OVERPACK CONTAINERmodel SCC-55

model DR-1-DP

model DR-2-DP

model DR-3-DP

model DR-4-DP

New




CAPACITY(POUNDS)

NET WT.(LBS.)

LIST PRICEEACH

SRBC-1 (1) VERTICAL 34" x 34" x 40" 600 300 $825.00SRBC-2 (2) VERTICAL 54" x 34" x 40" 1,200 340 896.00SRBC-HR-2 (1) HORIZONTAL (with stand) 54" x 34" x 40" 1,200 340 1,052.00

MEETS EPA 40 CPR - 264.175 & UFC 8003.1.3.4 DC-20/FC-100

MODELNUMBER

DRUMCAPACITY


CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

HSRB-1 1 32" x 52" x 18" 600 276 $689.00HSRB-2 2 61" x 52" x 18" 1,200 330 783.00HSRB-4 4 61" x 52" x 48" 2,400 441 1,012.00




CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

VSRB-1 1 DRUM STYLE 34" x 34" x 18" 600 195 $318.00VSRB-2 2 DRUM STYLE 54" x 34" x 14" 1,200 205 528.00VSRB-4 4 DRUM STYLE 54" x 50" x 10" 2,400 270 597.00VSRB-IN-4 4 DRUM STYLE 107" x 34" x 10" 2,400 380 $695.00


MODELNUMBER

ACCEPTABLEDRUM TYPE

OPERATIONMETHOD

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

FDT-22� 55 & 30-GALLON STEEL CHAIN 1,000 26 $114.00DL-31 55 & 30-GALLON STEEL FORK/CHAIN 1,500 37 116.00

DC-20/UPS

MODELNUMBER

DRUMCAPACITY


CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

STP-2 2 DRUM STYLE 55" x 34" x 55" 1,200 310 $700.00STP-4 4 DRUM STYLE 55" x 50" x 54" 2,400 385 795.00STP-BAR SECURITY BAR 54" -- 4 $52.00


143DRUM


ENTSteel Retention Basin CartsTransfer 55-gallon steel drums from area to area and then safely dispense the drums with this nonflammable Retention Basin Cart. This unit is constructed of steel to resist extreme heat environments. Portability is made easy with the 2 locking swivel and 2 fixed polyurethane casters. A push handle is located at one end for easy maneuverability. Removable steel grating is standard. Volume capacity is 66 gallons. Meets RCRA and Uniform Fire Code (UFC 8003).Model SRBC-HR-2 features a stand which measures 24"W x 14"L x 14"H.

Horizontal Steel Retention BasinsDispense or store 55-gallon steel drums with this non-flammable heavy-duty Horizontal Steel Retention Basin. This unit is constructed of steel to resist extreme heat environments. The rugged steel construction provides durability and repairability. Portability is made easy with the built in fork pockets. The built-in horizontal drum cradles are sloped. Volume capacity is 66 gallons. Meets RCRA and Uniform Fire Code (UFC 8003).

Vertical Steel Retention BasinsStore 55-gallon steel drums in the vertical position with these new non-flammable heavy-duty Drum Basins. The basin is constructed of steel to resist extreme heat environments. The rugged steel construction provides durability and repairability. Four way fork entry. Basins are stackable when empty to provide more space in a warehouse or storage area. Volume capacity is 66 gallons. Meets RCRA and Uniform Fire Code (UFC 8003).

model FDT-22 model DL-31

Drum LiftersModel FDT-22 can be used to lift both 30 and 55-gallon steel drums with either an overhead chain or hoist. This unique lifting system holds drums securely with a locking safety handle. Steel construction with powder coat finish.Model DL-31 may be used to lift 30 and 55-gallon steel drums with either an overhead chain or fork truck. Hook opening measures 4"W x 2"H. Steel construction with powder coat finish.

Stackable Transport Pallets with Side RailsMost spills occur when transporting chemicals. Safely and securely move your chemicals with our Transport Pallets. Welded all steel construction with a durable finish. Galvanized grating is easily removable for sump cleanup. 66-gallon sump capacity. Each unit is individually tested after being welded and before paint for leaks with a low viscous die penetrant test. Four-way forklift access. Meets EPA and UFC requirements.

model SRBC-2

model HSRB-1

model VSRB-4

model VSRB-IN-4

model STP-4

New

New

New

New

New





MODELNUMBER

ACCEPTABLEDRUM TYPE

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

DCL-550� 30-GALLON STEEL 1,000 18 $84.00DCL-1000� 55-GALLON STEEL 1,000 23 91.00

DC-20/UPS/FC-70

MODELNUMBER

ACCEPTABLEDRUM TYPE

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

VDL-22.5 55-GALLON STEEL 1,000 60 $122.00DC-20/UPS/FC-50

MODELNUMBER


CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

CDL-2000 PLASTIC, STEEL & FIBER DRUMS 2,000 8 $68.00DC-20/UPS/FC-50

MODELNUMBER

ACCOMMODATESDRUM DIAMETER

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

CHDL-1620 16" TO 20" 1,000 21 $246.00CHDL-2025 20" TO 25" 1,000 21 246.00

DC-25/UPS/FC-70

MODELNUMBER

ACCEPTABLEDRUM STYLES

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

PDL-800� 55-GALLON STEEL, PLASTIC & FIBER 800 60 $451.00DC-20/UPS/FC-100♦

MODELNUMBER


CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

PDL-800-M� STEEL, PLASTIC & FIBER 800 20 $121.00DC-20/UPS/FC-70

144DR

UM, P

AIL

& C

YLIN

DER

EQUI

PMEN

T

Drum ClutchersThe Drum Clutcher allows for easy lifting and transporting of steel drums with an overhead lifting chain or hoist. The Drum Clutcher is ideal for placing drums in secondary containment and salvage drums. Designed for steel drums with a top lip or chime. Not for use with open head drums.

Vertical Drum LifterThe Vertical Drum Lifter provides for easy lifting and transporting of drums. Solid steel construction. To use, simply lower unit onto the drum and as the lifter is elevated the positive gripping pads secure the drum. When the drum is lowered to the ground, the carriage drops down, automatically locking the drum lifter in an open position, ready for another drum. Use on 55-gallon steel drums with a top lip or chime. Not for use with open head drums.

Chain Drum LifterDesigned for drum lifting and transporting with an overhead lifting device. Constructed of grade 80 chain for OSHA & ANSI compliance. Easy to use design. Drum clamps include spring-loaded latch for positive drum grip. For use with closed head steel, plastic, and fiber 30 and 55-gallon drums with a top lip.

Crane/Hoist Drum LiftersThe Crane/Hoist Drum Lifter has an automatic mechanical operation. Great for positioning drums in and out of overpacks. Steel construction with spring loaded arms for safety. Accommodates steel, plastic, or fiber drums. Overall dimensions are 16"W x 9½"L x 21½"D. Drums weighing over 500 pounds must have top lid secured before lifting.

Multi-Purpose Overhead Drum Lifter/WrenchSimple three-arm design for use with closed head 30 and 55-gallon steel, plastic, and fiber drums with a top lip. Each removable arm also functions as a wrench for use on drum plugs, faucets, and rim ring bolts. Mechanical operation. Requires assistance from an overhead lifting device. Durable powder coat finish. Steel construction.

Automatic Overhead Drum LifterDesigned to handle 55-gallon steel, plastic, and fiber closed head drums with a top lip. Automatic secure and release eccentric lock makes this drum handler a real time saver. Includes adjustable positioning feature for increased adaptability. Requires assistance from an overhead lifting device. Not for use with open head drums.

MODELNUMBER


OVERALLSIZE (D x W)

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

DRUM-ST� 30 & 55-GALLON DRUMS 25" x 5" 1,500 35 $89.00DC-20/FC-70

MODELNUMBER


OVERALLDIAMETER

NET WT.(POUNDS)

LIST PRICEEACH

DTR-20 30-GALLON STEEL DRUMS 20" 16 $59.00DTR-24 55-GALLON STEEL DRUMS 24" 22 62.00DTR-28 85-GALLON STEEL DRUMS 28" 26 66.00

DC-20/UPS/FC-100

MODELNUMBER


FORK OPENING(W x H)

CAPACITY*(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

TDR-30 30-GALLON STEEL 5¾" x 3" 1,200 16 $129.00TDR-55� 55-GALLON STEEL 5¾" x 3" 1,200 24 129.00

*CAPACITY IS BASED ON FULL DRUMS / HALF-FULL DRUMS ARE RATED AT 600 LBS. DC-20/UPS/FC-70

MODELNUMBER

ACCEPTABLEDRUM TYPES STYLE

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

DCS-750-B 30 & 55-GALLON STEEL BRASS 750 6 $89.00DCS-1000-I 30 & 55-GALLON STEEL IRON 1,000 6 33.00DCS-2000-G 30 & 55-GALLON STEEL GALVANIZED 2,000 11 60.00

DC-20/UPS/FC-70

MODELNUMBER

ACCEPTABLEDRUM HEIGHTS

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

NVD-40� 16" TO 40" 1,000 40 $161.00DC-20/UPS/FC-70


HANDLELENGTH

NET WT.(POUNDS)

LIST PRICEEACH

DTP-11� UPENDER FOR HORIZONTAL DRUMS 40" 13 $27.80DC-20/UPS/FC-70

145DRUM


ENT

Drum StandsDrum Stands provide economical and convenient portability. These stands offer a uniquely designed understructure that allows for transporting of drums with either a pallet truck or fork truck. Fork lock tabs minimize the possibility of the drum stands accidentally tipping while being transported with a fork truck. Accepts steel, plastic, and fiber drums.The Drum Stand also allows for single drum stacking for easy storage of drums up to three high (empty stands are nestable and stackable). All welded steel construction. Stands include a safety yellow powder coat finish.

Drum TiersIncrease storage space by stacking your drums with our Drum Tier. The economical Drum Tier is designed to help maximize floor space in a safe and convenient manner. The lightweight design utilizes one person operation. Handles steel drums up to five units high. Tabs keep drums aligned when stacked.

Drum SlingsLift drums in the horizontal position quickly and easily with these Drum Slings. Handle open or closed head steel drums. The large steel lifting ring accommodates most overhead lifting systems. Choose from brass, iron, or galvanized iron construction. Accepts 30 and 55-gallon steel drums.

Tilting Drum RingsTransport up to 800 pounds with your fork truck and the Tilting Drum Ring. Pivoting fork pockets allow you to manually rotate drum to dispense light materials. To use, slip the band over the drum and tighten the lock to secure the band around the belly of the drum. Steel construction. Powder coat finish.

Manual Drum UpenderManual Drum Upender provides the leverage needed for tilting horizontal drums to the vertical position. Constructed of solid steel for long life. Wide toeplate prevents denting on barrel sides. Narrow top plate grabs a variety of chimes. Powder coat finish. Steel construction.

Near Vertical Drum LifterThis product is designed for the transportation of 55-gallon closed head steel drums with an overhead lifting device. Adjustable attachment point allows drum to be lifted from a horizontal to a near-vertical position. Easily attaches to any drum with both a top and bottom lip. Adjustable top attachment point for use with different height drums. Steel construction. Powder coat blue finish.


MODELNUMBER


WHEELTYPE

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

TILT-DOL-55-C 55-GALLON STEEL STEEL 1,200 24 $100.00TILT-DOL-55-H 55-GALLON STEEL HARD RUBBER 900 23 87.00

DC-20/UPS/FC-100


CASTERTYPE

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

DRUM-QUAD-H� BRIGHT ZINC FINISH HARD RUBBER 900 30 $61.00DRUM-QUAD-C� BRIGHT ZINC FINISH CAST IRON 1,200 31 81.00DRUM-QUAD-CS-SS� STAINLESS STEEL HARD RUBBER 900 30 125.00DRUM-TRI-H� BRIGHT ZINC FINISH HARD RUBBER 900 30 $57.00DRUM-TRI-C� BRIGHT ZINC FINISH CAST IRON 1,200 31 76.00

DC-20/UPS/FC-70

MODELNUMBER


CASTERTYPE

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

OCTO-55� 55-GALLON CAST IRON 2,000 51 $91.00DRUM-HD� 55-GALLON PHENOLIC 2,000 42 84.00

DC-20/UPS/FC-70


DRUM TYPE(GALLON)

CASTERTYPE

APPROX.HEIGHT

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

DDO-P103-HT3 CAST IRON 55 & 30 HARD RUBBER 4½" 550 29 $59.00DDO-P103-SS3 CAST IRON 55 & 30 SEMI-STEEL 4½" 600 32 59.00DRUM-DRH-HR WITH HANDLE 55 HARD RUBBER 6" 1,000 34 $71.00DRUM-SS-55-H STAINLESS STEEL 55 HARD RUBBER 6" 800 22 $107.00DDO-P105-SS3 DRUM HALO 55 SEMI-STEEL 4½" 750 57 $101.00

DC-20/FC-70

146DR

UM, P

AIL

& C

YLIN

DER

EQUI

PMEN

T

Tilting Drum DolliesRound steel drum dolly designed exclusively for 55-gallon drums. Includes unique feature to tilt drums 10° for better liquid extraction. Tilting feature is foot-operated and locks into place when activated. Dolly includes four swivel casters for maximum maneuverability. Patent pending.

Octo & Heavy-Duty Drum DolliesThe Octo Drum Dolly, model OCTO-55, will transport 55-gallon drums weighing up to 2,000 pounds. Rolls on (8) 4" x 1¼" cast iron swivel casters for maximum stability.

Transport 55-gallon drums with the Heavy-Duty Drum Dolly, model DRUM-HD. With a capacity of 2,000 lbs., this dolly will transport your heavier drums from location to location. (4) 4" x 2" locking swivel phenolic casters with brakes standard.

Multi-Purpose DolliesThese multi-purpose dollies have a high polished bright zinc finish for corrosion resistance and (4) 3" x 1¼" swivel casters. Each unit comes with a 4 foot long nylon pull strap that helps in transporting down aisles or over thresholds. Rubber-coated hook allows strap to hook on top of drum for storage

Quad Dolly, series DRUM-QUAD, can transport a 5-gallon pail, 30 or 55-gallon drum or LP gas tank. Available with hard rubber or cast iron wheels.

Stainless Steel, model DRUM-QUAD-CS-SS, also available.

Tri Dolly, series DRUM-TRI, will transport 5-gallon pails, 30-gallon drums, or LP gas tank.

series DRUM-QUAD

series DRUM-TRI

model OCTO-55

model DRUM-HD

Mobile Drum DolliesTransport ordinary or specialty drums easily with these multipurpose Drum Dollies.Various constructions, designs, caster types and sizes to accommodate your application.

series DDO-P103 model DRUM-DRH-HR model DRUM-SS-55-H model DDO-P105-SS3

New

MODELNUMBER WIDTH DEPTH HEIGHT

PIECESPER BOX

NET WT.(LBS.)

LIST PRICEPER BOX

VDRCH-1 15" 6" 2" 4 8 $53.00VDRCH-2 15" 29½" 2" 2 10 81.00VDRCH-3 15" 36" 4" 1 9 59.00VDRCH-4 18" 36" 5½" 1 12 81.00

DC-20/FC-100

STANDARD STEEL DRUMSMODEL

NUMBERGALLON

CAPACITYGAUGE

TOP/BODY/BOTTOM STYLEUN

SOLIDUN

LIQUIDNET WT.

(POUNDS)LIST PRICE

EACHSD-30-OH-02 30-GALLON 20 / 20 / 20 OPEN HEAD 1A2 / X200 / S 1A2 / Y1.2 / 100 26 $64.00SD-30-OH-05 30-GALLON 18 / 18 / 18 OPEN HEAD 1A2 / X235 / S 1A2 / Y1.5 / 150 33 76.00SD-30-OH-07 30-GALLON 16 / 18 / 18 OPEN HEAD 1A2 / X225 / S 1A2 / Y1.5 / 150 35 91.00SD-30-OH-07-Q 30-GALLON 16 / 18 / 18 OPEN HEAD 1A2 / X225 / S 1A2 / Y1.5 / 150 37 93.00SD-30-TH-08 30-GALLON 20 / 20 / 20 CLOSED HEAD N/A 1A1 / Y1.5 / 300 26 61.00SD-30-TH-13 30-GALLON 16 / 20 / 16 CLOSED HEAD N/A 1A1 / X1.2 / 300 31 74.00SD-55-OH-04 55-GALLON 18 / 20 / 20 OPEN HEAD 1A2 / Y228 / S 1A2 / Y1.2 / 100 38 $74.00SD-55-OH-06 55-GALLON 18 / 18 / 18 OPEN HEAD 1A2 / X435 / S 1A2 / Y1.5 / 150 48 78.00SD-55-OH-07 55-GALLON 16 / 18 / 18 OPEN HEAD 1A2 / X400 / S 1A2 / Y1.5 / 150 50 89.00SD-55-OH-07-Q 55-GALLON 16 / 18 / 18 OPEN HEAD 1A2 / X400 / S 1A2 / Y1.5 / 150 55 93.00SD-55-OH-08 55-GALLON 16 / 16 / 16 OPEN HEAD 1A2 / X430 / S 1A2 / Y1.6 / 200 60 102.00SD-55-OH-08-Q 55-GALLON 16 / 16 / 16 OPEN HEAD 1A2 / X440 / S 1A2 / Y1.4 / 100 62 106.00SD-55-TH-13 55-GALLON 20 / 20 / 20 CLOSED HEAD N/A 1A1 / Y1.2 / 200 37 $60.00SD-55-TH-15 55-GALLON 18 / 18 / 18 CLOSED HEAD N/A 1A1 / X1.8 / 300 48 77.00SD-55-TH-16 55-GALLON 16 / 16 / 16 CLOSED HEAD N/A 1A1 / X1.8 / 300 60 92.00

SUFFIX “Q” INDICATES THE QUICK RELEASE LEVER OPTION DC-20/FC-CONTACT FACTORY

STAINLESS STEEL DRUMSMODEL

NUMBERGALLON

CAPACITYGAUGE

TOP/BODY/BOTTOM STYLEUN

SOLIDUN

LIQUIDNET WT.

(POUNDS)LIST PRICE

EACHSSD-30-TH-03 30-GALLON 18 / 18 / 18 CLOSE HEAD N/A 1A1 / X1.2 / 300 33 $646.00SSD-30-OH-04 30-GALLON 16 / 18 / 18 OPEN HEAD 1A2 / X225 / S 1A2 / Y1.5 / 150 35 652.00SSD-55-OH-01 55-GALLON 16 / 16 / 16 OPEN HEAD 1A2 / X430 / S 1A2 / Y1.5 / 200 60 980.00SSD-55-TH-03 55-GALLON 18 / 18 / 18 CLOSE HEAD N/A 1A1 / X1.8 / 300 48 746.00SSD-55-TH-04 55-GALLON 16 / 16 / 16 CLOSE HEAD N/A 1A1 / X1.8 / 550 60 881.00

DC-20/FC-CONTACT FACTORY

MODELNUMBER


POLYDIAMETER

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

POLY-D-30 30-GALLON 20" 600 6 $60.00POLY-D-55 55-GALLON 24" 600 7 66.00

DC-20/UPS/FC-250

147DRUM

, PAIL & CYLINDER EQUIPM

ENT

Drum ChocksEliminate the need for expensive specialty racks and stands to store your drums horizontally. Now, with the Drum Chock, you can store your drums horizontally on standard pallet racks or on wooden pallets. The chock eliminates rolling while drums are stored on their side. Models are also available to tilt drums forward for better drainage from standard faucets. Front stops are included on tilted models to eliminate drum slide off. Constructed of recycled polyethylene.

MINI CHOCKmodel VDRCH-1

SHELF CHOCKmodel VDRCH-2

INCLINED SHELFmodel VDRCH-3

INCLINED SHELFWITH FORK OPTION

model VDRCH-4

Steel Drums Standard and U.N. Rated

Standard Steel DrumsQuality cold rolled drums meet most U.N. requirements for shipping and packaging. Drum interior is coated with a corrosion inhibitor. Open head drums have removable lids and 12 gauge bolt ring closure. Closed head drums have a 2" and ¾" bung.

Stainless Steel DrumsHigh quality 304 stainless drums are finished in a 2B polish. Meets most U.N. requirements for shipping and packaging. Excellent corrosion resistance makes these Stainless Steel Drums superior for storage and shipping of foods and chemicals. Open head drums have removable lids and 12 gauge bolt ring closure. Closed head drums have a 2" and ¾" bung.

OPEN HEADSTEEL DRUM

CLOSED HEADSTEEL DRUM

QUICK RELEASE LEVER OPTION • suffix Q

This option is used with open head drums only. Lever automatically tightens drum lids to U.N. specifications. Replaces standard 12 gauge bolt ring closure.

STEEL SURCHARGES MAY APPLY - CHECK WITH FACTORY FOR DETAILS

Polyethylene Drum DolliesManufactured from high impact strength polyethylene, these drum dollies are lightweight yet strong. Dollies come standard with (4) 3" swivel poly casters, and they are suited for both indoor and outdoor applications. Specify color when ordering. Choose from blue, black, green, red, yellow, or white.


NET WT.(POUNDS)

LIST PRICEPER PKG.

DC-TP CLEAR PLASTIC FOR 55-GALLON CLOSED STEEL HEAD DRUMS (5 PER PKG.) 6 $58.00DC-TPO PLASTIC COVER FOR 55-GALLON OPEN STEEL HEAD DRUMS (5 PER PKG.) 6 58.00DC-TPB BLACK PLASTIC FOR 55-GALLON CLOSED STEEL HEAD DRUMS (5 PER PKG.) 6 58.00VDC-30 30-GALLON OPEN OR CLOSED HEAD DRUMS (DIAMETER 20") (1 PER PKG.) 2 $18.00VDC-55 55-GALLON OPEN OR CLOSED HEAD DRUMS (DIAMETER 25") (1 PER PKG.) 3 17.00

DC-20/UPS/FC-70


NET WT.(POUNDS)

LIST PRICEEACH

DD-9 STANDARD DRUM DEHEADER 11 $64.00DDB-1 REPLACEMENT BLADE FOR DD-9 1 15.00D-HEAD-1 EXPRESS-OPEN DRUM DEHEADER 10 $100.00D-HEAD-B REPLACEMENT BLADE FOR D-HEAD-1 1 15.00D-HEAD-GK REPLACEMENT GEAR/BUSHING KIT FOR D-HEAD-1 1 15.50

DC-20/UPS/FC-70

MODELNUMBER DESCRIPTION COLOR

OVERALL SIZE(H x D)

NET WT.(POUNDS)

LIST PRICEEACH

TRASH-TOP-R GENERAL WASTE TOP RED 8½" x 24½" 14 $86.00TRASH-TOP-G GENERAL WASTE TOP GREEN 8½" x 24½" 14 86.00TRASH-TOP-B GENERAL WASTE TOP BLACK 8½" x 24½" 14 86.00

DC-20/UPS/FC-250

MODELNUMBER


INSIDEDIAMETER

NET WT.(POUNDS)

LIST PRICEEACH

DC-235 CLOSED HEAD (tight head) 24½" 3½ $11.80DC-245 OPEN HEAD (tight head) 24½" 3½ 12.80DC-245-H OPEN HEAD (tight head) (WITH HANDLE) 24½" 3¾ 21.80CAN-CAP-G OPEN HEAD (tight head) 24½" 3½ 36.80

DC-35/UPS/FC-65

148DR

UM, P

AIL

& C

YLIN

DER

EQUI

PMEN

T

General Waste Disposal TopsDrum Tops are steel covers that fit over 55-gallon drums. They are used for recycling and generalwaste disposal. Features powder coated finish with ultra violet stabilizer and screws for securing cover to drum.

Drum CoversProtect your drums from bung seepage and unprotected outdoor storage situations. Convenient, and designed for years of reliable use.Series DC-TP is constructed of flexible 60 mil thick polyethylene.Features an ultraviolet screen. Temperature range is -50 to +212°F.Series VDC, simply set on top of the drum. The 2½" side lip keeps rain water out. This durable cover will allow other drums to be stacked on top of it. Overall height is 3". Rigid Polyethylene construction. Specify color when ordering. Choose from blue, black, green, red, yellow, or white.

Manual Drum DeheadersConvert your closed head steel drums into storage containers with our Drum Deheaders. The DD-9 can be adjusted to open steel drums with different thicknesses. The blade is angled for maximum penetration and flattens the cut edge so there are no sharp or jagged edges. Replacement blades available, model DDB-1.

Quickly remove the head of a steel drum with our new Express-Open Drum Deheader! Unique design, model D-HEAD-1, is similar to a household can-opener and is very easy to use. Comfortable handle configuration allows for maximum operator comfort. Includes vice-grip style mechanism for securely attaching unit to drum. A standard ½" ratchet drive (manual or pneumatic) must be used to operate the deheader (ratchet drive not included). Inside cutting blade does not leave a sharp edge on the drum. Replacement blades available separately, model D-HEAD-B. Both styles open 30 and 55-gallon steel drums and 5-gallon pails.

model TRASH-TOP-R

model DC-TPB

series VDC

model DC-TP model DC-TPO

model DD-9

model D-HEAD-1

Galvanized Steel Drum CoversGalvanized steel drum covers for 55-gallon drums. Manufactured from 26 gauge galvanized steel. Cover drum tops for added protection. Perimeter rim is beaded for safety. Recycling Top, model CAN-CAP-G, includes a “CANS ONLY” decal. The disposal hole measures 3½".

model DC-245-Hmodel DC-235

model CAN-CAP-G

New


DRIVESIZE

NET WT.(LBS)

LIST PRICEEACH

PRICE FOR 2+

BUNG-S-B1 NON-SPARKING BRONZE ALLOY 3/8" 1 $39.00 $33.00BUNG-S-B2 NON-SPARKING BRONZE ALLOY 1/2" 1 39.00 33.00BUNG-S-S1 BRIGHT ZINC PLATED CAST STEEL 3/8” 1 18.00 16.00BUNG-S-S2 BRIGHT ZINC PLATED CAST STEEL 1/2" 1 18.00 16.00BUNG-S BRIGHT ZINC PLATED CAST STEEL 3/4" 1 18.00 16.00

DC-20/UPS/FC-70


OVERALLLENGTH

NET WT.(POUNDS)

LIST PRICEEACH

BNW-A NON-SPARKING ALUMINUM (SINGLE ENDED) 10½" 1 $13.00BNW-I IRON (DOUBLE ENDED) 13” 5 18.00BNW-I-W POLISHED ZINC CAST STEEL 12" 5 $27.00BNW-B-W NON-SPARKING BRONZE ALLOY 12" 6 77.00BNW-IX-W POLISHED ZINC CAST STEEL 12" 2 22.00BNW-BX-W NON-SPARKING BRONZE ALLOY 12" 2 42.00

DC-25/UPS/FC-70

MODELNUMBER DESCRIPTION ACCOMMODATES

NET WT.(POUNDS)

LIST PRICEEACH

TAP-3 HORIZONTAL DRUM TAP 2" DRUM OPENINGS 4 $91.00DC-20/UPS/FC-70

MODELNUMBER

DRIVESIZE

TORQUERATING

OVERALLLENGTH

NET WT.(POUNDS)

LIST PRICEEACH

TW-38 3/8" 10 - 80 ft-lbs. 11" 5 $35.90TW-12 1/2" 10 - 150 ft-lbs. 11" 5 35.90

DC-20/UPS/FC-70


DRUM SOCKETACCOMMODATES

RATCHETDRIVE

NET WT.(POUNDS)

LIST PRICEEACH

BUNG-X IMPACT SOCKET 2" & ¾" ½" 2 $88.00DC-25/UPS/FC-70

149DRUM

, PAIL & CyLINDER EQUIPM

ENTDrum Bung Nut WrenchesBung Nut Wrenches are available in several different materials to meet many applications.These multipurpose drum tools not only open and close drum bungs or plugs, they also work as a bung wrench, ring wrench and faucet wrench all in one! Wrenches are universal in that they fit all types of industrial drum plugs and bungs in metal or plastic. The angled handles on model BNW-I-W and BNW-B-W protect knuckles in most positions. These durable wrenches will not bend, break or chip. Eliminate the need for extra tools with these multifunctional drum wrenches! Patent pending.

Drum Bung SocketsOpen drum bungs easily! Tighten or remove with a socket wrench (wrench not included). Available in non-sparking bronze alloy or zinc plated cast steel. Fits 3/4" and 2" drum plugs. Order optional torque wrench (see below) to tighten drum bung to UNC standards.

model BNW-A

model BNW-B-W

model BNW-IX-W

FITS 3/4” AND 2” DRUM PLUGS AS SHOWN ABOVE.

Torque WrenchesReversible ratchet-head style torque wrench. Easy to set torque setting - wrench ‘clicks’ when setting is reached. Knurled handle grip surface for extra grip during use. Use with bung sockets to comply with UNC standards.

model BNW-I

THE TAP-3 WILL ONLY WORK WITH THIS TYPE OF DRUM PLUG.

Horizontal Drum TapThis unique product will allow you to open a 2" drum bung, empty the contents of the drum, and close the drum bung, all with the drum in the horizontal position. Eliminates the need to rotate the drum into the vertical position to gain access. Operation is simple: attach Drum Tap to bung with locking ring, push handle towards drum and twist to unscrew bung, pull handle out away from drum to empty drum contents. Reverse operation to close drum and remove Drum Tap from bung. This product saves time, energy, and reduces the risk of spills. May be used to fill drums in the horizontal position with the bung positioned at the top of the drum. Constructed of fiberglass reinforced polypropylene. O-rings are made of nitrile rubber.

Drum Impact SocketDesigned for opening and closing 2" and ¾" drum plugs. Use with a ½" ratchet drive. Manufactured from heat treated chrome vanadium steel for strength when using with pneumatic impact driver. Works with several ¾" and 2" drum plugs, see illustration.

New

MODELNUMBER CONSTRUCTION

VOLUMECAPACITY DIAMETER

NET WT.(POUNDS)

LIST PRICEEACH

DP-FUN POLYETHYLENE 5-GALLON 24" 6 $64.00DC-20/FC-150


THREAD DIAMETER

NET WT.(POUNDS)

LIST PRICEEACH

BLD-80 BRASS DRUM LOCK 2" & ¾" 6 $49.00DTL-22 POLYCARBONATE DRUM LOCK 2" & ¾" 1 24.00

DC-20/UPS/FC-50


ACCOMMODATESBUNG SIZE

NET WT.(POUNDS)

LIST PRICEEACH

VDFT POLYETHYLENE (MANUAL HANDLE) ¾" 1 $2.10JDFT POLYETHYLENE (MANUAL HANDLE) 2" 1 $12.30JDFT-B BRASS (MANUAL HANDLE) 2" 8 100.00DFT-SS STAINLESS STEEL (SPRING-LOADED HANDLE) ¾" 2 $119.00DFT-AL BRASS-PLATED ZINC (LOCKABLE HANDLE) ¾" 1 $8.00DFT-AS-SC BRASS-PLATED ZINC (LOCKABLE HANDLE) ¾" 1 23.00DFT-RIGID BRASS (LOCKABLE HANDLE) ¾" 2 36.00DFT-ADJ BRASS (SPRING-LOADED HANDLE) ¾" 2 44.00

DC-20/UPS/FC-70

MODELNUMBER DESCRIPTION DISPLACEMENT

NET WT.(POUNDS)

LIST PRICEEACH

VENT-V VERTICAL DRUM VENT FITS 2" OPENINGS 2 $59.00VENT-H HORIZONTAL DRUM VENT FITS 2" OPENINGS 1 43.00

DC-25/UPS/FC-50


DRUMSIZE

FITS DRUM BUNGS

NET WT.(POUNDS)

LIST PRICEEACH

DF-S STEEL 55-GALLON 2" 13 $128.00DC-20/UPS/FC-70

150DR

UM, P

AIL

& C

YLIN

DER

EQUI

PMEN

T

Drum Pump FunnelEliminate spills, drips, and the need for absorbent pads on top of drums with this easy to use Drum Funnel. A ¾" drain fits into one opening of your 55-gallon drum, while the drum pump (sold separately) is installed into the opposite adjustable opening in the funnel.

Drum LocksPrevent unauthorized access to drum contents. Simply screw drum lock into place, insert zinc plated steel rod, and secure with padlock (padlock not included). Steel rod is pre-drilled with a 5/16" diameter padlock hole. Works with both ¾" and 2" bungs.

Manual Drum FaucetsQuickly and easily dispense drum contents with our Drum Faucets. Available in stainless steel, aluminum, and brass. Polyethylene Drum Faucet, model VDFT, is constructed of corrosion-resistant polyethylene. Handles viscous materials. Instant on/off control ensures fast, smooth flow. Padlock not included.The Jumbo Drum Faucets, model JDFT, are ideal for dispensing viscous, non-corrosive flammables such as adhesives, paint, heavy oils, grease, and varnish. Padlock not included.

model VDFTNon-Adjustable Nozzle

model JDFT-BNon-Adjustable Nozzle

model JDFTNon-Adjustable Nozzle

model DFT-AS-SCNon-Adjustable Nozzle

model DFT-SSAdjustable Nozzle

model DFT-ADJAdjustable Nozzle

model DFT-RIGIDNon-Adjustable Nozzle

Drum VentsTwo styles available for use with drums in horizontal or vertical positions. Use with standard 2" drum plug openings. Each vent includes a flash arrestor for safety.

model BLD-80

model VENT-V model VENT-H

Steel Drum Funnel (with self-closing lid)Allows for quick filling of 55-gallon drums with 2" plug. Includes 6" long brass flame assestor for safety. Hinged lid with fusible link automatically closes at 160°. Lid latch may be locked for security (lock not included). Fits 2" NPS threaded drum bung. Gasket included for tight seal. Steel construction with painted finish.

New

New

MODELNUMBER DESCRIPTION CONSTRUCTION

DISPLACEMENTPER STROKE

BUNGSIZE

NET WT.(POUNDS)

LIST PRICEEACH

RDP-55 ROTARY DRUM PUMP STEEL 34 oz. 2" 12 $35.40ADP-55 ROTARY DRUM PUMP ALUMINUM 34 oz. 2" 12 118.00PDP-55 ROTARY DRUM PUMP POLYPROPYLENE 34 oz. 2" 8 80.00RP-90R** ROTARY DRUM PUMP RYTON 34 oz. 2" 7 80.00VDP SELF-VENTING POLYPROPYLENE 8 oz. ¾" & 2" 1 $17.00VDPX SELF-VENTING POLYPROPYLENE 16 oz. ¾" & 2" 1 17.00VLDP LEVER ACTION POLYPROPYLENE 10 oz. 2" 1 $53.00LDP-ST LEVER ACTION STEEL 12 oz. 2" 9 20.00LDP-POLY LEVER ACTION POLYPROPYLENE 12 oz. 2" 4 25.00LDP-RYT LEVER ACTION RYTON, 316 SS ROD 12 oz. 2" 4 35.00LDP-POLY-316 LEVER ACTION POLYPROPYLENE 316 SS 12 oz. 2" 4 24.00LDP-SS-316 HAND PUMP 316 STAINLESS STEEL 16 oz. 2" 12 $102.00PAIL-PST PISTON PAIL PUMP STEEL 8 oz. 1" 3 $16.00PAIL-PST-SS PISTON PAIL PUMP STAINLESS STEEL 8 oz. 1" 3 77.00

**USE WITH ACETONE, MEK, LACQUER THINNERS DC-20/UPS

MODELNUMBER DESCRIPTION / SPEED

NET WT.(POUNDS)

LIST PRICEEACH

COMPLETE UNIT EDP ELECTRIC DRUM PUMP - 115 VOLT 18 $395.00

MOTOR SOLDSEPARATELY

LEP-85-VS 0.85 HP ELECTRIC PUMP MOTOR - VARIABLE SPEED 7 $405.00LEP-85-SS 0.85 HP ELECTRIC PUMP MOTOR - SINGLE SPEED 7 343.00LEP-1-SS 1 HP ELECTRIC PUMP MOTOR - SINGLE SPEED 9 379.00

PUMP TUBESOLD SEPARATELY

LPT-P-39-HC POLYPROPYLENE PUMP TUBE - HASTELLOY C DRIVE SHAFT 9 $342.00LPT-P-39-SS POLYPROPYLENE PUMP TUBE - STAINLESS STEEL DRIVE SHAFT 9 310.00LPT-S-39-SS STAINLESS STEEL PUMP TUBE - STAINLESS STEEL DRIVE SHAFT 9 560.00LMPT-P-39-SS POLYPROPYLENE MIXING PUMP TUBE - SS DRIVE SHAFT 7 941.00

DC-20/UPS

151DRUM

, PAIL & CyLINDER EqUIPM

ENTManual Drum & Pail PumpsDesigned for dispensing and transferring liquids out of 55-gallon drums and 5-gallon pails. Choose rotary, lever, piston, or electric action dispensing. Constructed of either steel, aluminum, polypropylene, or stainless for application specific chemical resistance.RDP-55 - Ideal for light oils, anti-freeze, and other light non-flammable and non-combustible liquids.ADP-55 - High-speed drum pump for light oils up to 40 weight.VDP & VDPX - Exceptional resistance to corrosive chemicals (non-flammable solvents).VLDP - Handles viscous liquids up to 12,000 cPs (equivalent to SAE 90 oil). Not for use above 125°F or with heated drums.LDP-ST - For petroleum products up to 200 cPs.PAIL-PST-SS - Handles most liquids**NOT RECOMMENDED FOR: Ammonium Chloride, Aqua Regia, Bromine Water, Calcium Chloride, Chloracetie Acid, Chlorine Water, Ferric Chloride, Ferrous Chloride, Freon 12, Hydrobrmic Acid, Hydrofluoric Acid, Sodium Hydroxide, Stannic Chloride, and Sulfuric Acid.

Electric Drum PumpsReduce time required to dispense or transfer liquids. Choose complete unit, EDP, or a deluxe unit which allows you to customize by specifying the motor and pump tube ideal for your application.

model RDP-55 model ADP-55 model VDP

model LDP-POLY model LDP-RYT model LDP-SS-316model VLDP model LDP-ST

model PAIL-PST-SS

model EDP model LEP-85-VS model LEP-1-SS model LPT-P-39-HC model LPT-S-39-SS model LMPT-P-39-SS

model PDP-55model RP-90R


MODELNUMBER DESCRIPTION DISPLACEMENT

NET WT.(POUNDS)

LIST PRICEEACH

DGLI-4 HORIZONTAL DRUM GAUGE FITS ¾" BUNGS 4 $73.00DC-20/UPS/FC-70

MODELNUMBER

VOLUMECAPACITY COLOR


NET WT.(POUNDS)

LIST PRICEEACH

TH-64 64 GALLONS GREY 23" x 29" x 41" 55 $77.10TH-32 32 GALLONS GREEN 18½" x 22" x 37½" 35 57.70

DC-25/FC-250

MODELNUMBER

VOLUMECAPACITY COLOR

OVERALL SIZE(D x H)

NET WT.(POUNDS)

LIST PRICEEACH

PAIL-54-PWS 5.4 GALLONS WHITE 11-7/8" x 14-11/16" 2.2 $8.22LID-54-PWT -- WHITE 12-1/2" x 1-7/16" 0.6 2.61

DC-25/FC-250

MODELNUMBER

ACCOMMODATESPAIL TYPES

OVERALL SIZE(W x L x T)

NET WT.(POUNDS)

LIST PRICEEACH

PAIL-PAL� 5 GALLON PLASTIC & STEEL 3" x 7" x ½" 2 $22.00DC-20/UPS/FC-70

MODELNUMBER

POUR HEIGHTLOWERED / RAISED

CRADLE HEIGHTLOWERED / RAISED

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

LLW-PAILD-200 1" TO 52" 3¼" TO 58" 200 134 $571.00DC-25/FC-92.5

152DR

UM, P

AIL

& C

YLIN

DER

EQUI

PMEN

THorizontal Drum Gauge Level IndicatorThe Horizontal Drum Gauge Level Indicator allows personnel to read the level of contents in a drum. Gauge accepts a 3/4" faucet (sold separately). 18-3/8" site gauge. For use with plastic or steel drums. Works well with most oils, solvents, and chemicals. Faucet is not included.

Refuse ContainersDurable polyethylene construction withstands subzero cold and extreme summer heat. Great for high traffic areas such as: warehouses, fairs, ball parks, schools, etc. Each container includes two wheels for easy portability. Hinged lip keeps rain out. Keep your waste out of eyesight in our heavy-duty and easy to move refuse containers.

model TH-64 model TH-32

Plastic Pail and LidMade from high density 0.090 mil thick virgin polyethylene (HDPE) material. The material used to make the pail and lid complies with FDA regulations 21CFR177.1520(c).

Steel Pail Pal (Pail OPener)A must-have product for anyone using five gallon plastic and steel pails. The cutter is used to cut a slit in the lid lip of the pail to enable the lid of the plastic pail to be removed. The side guide conveniently slides under the lid lip for easy removal of the lid. The end hook is used to open steel pails. Just hook the lid lip and rotate. The opposite end is used to close and seal the lid by bending the lip back around the steel pail top.

Variable Height Pail DispenserVariable Height Pail Dumper provides 24 angle settings for dispensing 5 gallon plastic or steel pails. Dispense at any height between 1" and 52" by turning the hand cable winch. 6" x 2" mold-on-rubber wheels with tilt back “hand truck” design can go virtually anywhere. Includes 2" diameter front steel wheels and top wheels for easily loading unit into a van or truck. Steel construction with powder coat finish.

New


OVERALL SIZE( W x D x H)

NET WT.(POUNDS)

LIST PRICEEACH

HPC-400 STEEL PAIL CRUSHER 28" x 28" x 65" 300 $2,257.00DC-20/FC-100

MODELNUMBER OPERATION

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

PAIL/D-5 LINEAR ACTUATED 125 261 $1,381.00DC-20/FC-100/250♦

MODELNUMBER

STORAGECAPACITY


NET WT.(POUNDS)

LIST PRICEEACH

HORIZONTAL STORAGE CABINETSCYL-T-4 4 HORIZONTAL 29" x 29" x 40" 72 $530.00CYL-T-8 8 HORIZONTAL 29" x 29" x 66" 175 726.00CYL-T-16 16 HORIZONTAL 58" x 29" x 66" 240 1,095.00VERTICAL STORAGE CABINETSCYL-T-10 9 VERTICAL 29" x 29" x 66" 100 $703.00CYL-T-20 18 VERTICAL 58" x 28" x 66" 180 960.00COMBINATION STORAGE CABINETSCYL-T-COMBO 8 HORIZONTAL

& 9 VERTICAL58" x 29" x 66" 210 $1,126.00

DC-25/FC-70


DISPENSINGHEIGHT

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

CAN-A STEEL 10" 70 8 $38.00CAN-S STAINLESS STEEL 10" 70 12 89.00

DC-20/UPS/FC-100/250♦

153DRUM


ENTHydraulic Pail CrusherCrush 5-gallon steel pails quickly and easily. Crushes steel pails to approximately 2" high and resets automatically to crush another pail. Reduce storage space and disposal costs.Safety features include: pressure relief valve to prevent overload, door interlock system to prevent the motor from running if the door is unlatched, mushroom head emergency stop button. Other features include a hydraulic pump that provides 70 second cycle time, 10,000 pounds of crushing power, removable legs for bench top mounting and 120 volt single phase for “plug in operation”. Meets OSHA and JIC standards. (Oil Filter Crusher can be found on page 155)

Linear Actuated Pail DumperMinimize redundant bending required to pour pail contents. 120 volt 1 phase power supply standard. Pendant hand control gives operator infinite control of 135° rotation. Solid steel construction with variable height refastener to dispense with or without pail contents contacting the chute. Dump height is 17" when chute is fully rotated. Portable with two rigid and two swivel casters.

Galvanized Cylinder Storage CabinetsStore LP tanks horizontally and acetylene tanks vertically in these heavy-duty Cylinder Storage Cabinets. Made of all steel construction, these rust resistant units have 4 gauge galvanized welded wire sides with sturdy 1½" square steel angle frames. Durable 12 gauge galvanized steel roof. The galvanized rust resistant finish stands up to harsh outdoor environments. Features a padlock hasp for security (padlock not included), “Danger Flammable Materials” sign, and all necessary hardware. Meets OSHA 1910.110 requirements. Assembly required.

model CYL-T-COMBO

Manual Pail TippersThe back saving Manual Pail Tipper is designed for dispensing 5-gallon plastic or steel pails. Variable height chime lock for quick loading and unloading. Sturdy steel or stainless steel construction available. The overall size is 12½"W x 14¼"D x 30"H. Ships knockdown. Some assembly required. Pail is rotated manually.

MODELNUMBER USE WITH

NUMBER OFCYLINDERS

NET WT.(POUNDS)

LIST PRICEEACH

CYL-P-4 FORK TRUCK 4 158 $274.00CYL-190 FORK TRUCK 6 190 338.00CYL-P-8 FORK TRUCK 8 252 371.00PJ-CYL-2 PALLET TRUCK 2 50 $244.00PJ-CYL-4 PALLET TRUCK 4 108 335.00CYL-CK CASTER KIT (FOR CYL) -- 48 $175.00PJ-CYL-CK CASTER KIT (FOR PJ-CYL) -- 48 181.00

DC-25/FC-125/250♦

MODELNUMBER


ACCOMMODATESCYLINDERS

NET WT.(POUNDS)

LIST PRICEEACH

LP-170 38" x 41" x 29" 12" DIA. x 24" H 278 $318.00DC-25/FC-125/250♦

MODELNUMBER MATERIAL


NET WT.(POUNDS)

LIST PRICEEACH

CB-W-S STEEL 1 3 $17.20CB-W-2S STEEL 2 7 35.60CB-W-3S STEEL 3 12 52.70CB-W-P PLASTIC 1 2 $13.50CB-W-2P PLASTIC 2 4 23.00

DC-30/UPS/FC-70

MODELNUMBER


CAPACITY(POUNDS)


NET WT.(POUNDS)

LIST PRICEEACH

OCC-2 30" x 23" x 53" 200 8½" to 12½" 89 $510.00DC-25/FC-100

MODELNUMBER

CAPACITY(POUNDS)

CASTERSIZE

NET WT.(POUNDS)

LIST PRICEEACH

CYHT-350 350 10" x 2" 75 $113.00DC-25/FC-100

154DR

UM, P

AIL

& C

YLIN

DER

EQUI

PMEN

TCylinder CaddiesTransport cylinders safely with these fork mounted or pallet jack style cylinder caddies. These units can hold anywhere from 2 to 6 cylinders and they come complete with safety chains to secure the cylinders in place. Made of all steel construction, these units hold cylinders up to 9½" in diameter. The optional caster kit allows for portability without the need of a fork truck or pallet truck. Features two rigid and two swivel casters.

model PJ-CYL-4Shown with Caster Kit

model PJ-CYL-CK

model CYL-190

Fork Truck LP Tank CaddyHolds up to (6) LP tanks up to 12" in diameter each. Made of all steel construction. Safety chains to hold the tanks in place are standard. Portable with fork truck.

Wall Mounted Cylinder BracketsSimple design is easy to install. Simply bolt to wall and then secure cylinder with strap. Choose either steel or molded plastic construction. Optional steel chain available for added safety.

model CB-W-Pmodel CB-W-2P

model CB-W-Smodel CB-W-2S

model CB-W-3S

Portable Cylinder ClutcherDesigned for lifting and moving gas cylinders with automatic operation. Simply raise and lower handle to operate. Unit raises cylinders 2" off the ground. Works with cylinder diameters between 8½" to 12½". Includes two rigid and one swivel caster. Welded steel construction with painted yellow finish.

New

New

Cylinder Tilt Back Hand TruckIdeal for transporting cylinders from storage to work space. Chains and contoured back cradle provide utmost safety. Tilt back design for effortless transportation.New


MODELNUMBER

STORAGECAPACITY

OVERALL SIZE(W x L x H) CASTERS

NET WT.(POUNDS)

LIST PRICEEACH

LP-6 6 TANKS 33" x 80" x 73" 8" x 2" PHENOLIC 750 $1,975.00DC-25/FC-100

MODELNUMBER


CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

CYL-2 40" x 29" x 65" 500 295 $575.00DC-20/FC-70


OVERALL SIZE( W x D x H)

CYCLE TIME(SECONDS)

NET WT.(POUNDS)

LIST PRICEEACH

CM-1 AIR OPERATED, 100-180 PSI 13¾" x 18" x 27" 11-20 255 $1,827.00CM-2 ELECTRIC-HYDRAULIC, 208-230V, 1PH 25" x 27" x 41½" 12 400 4,863.00CM-T TUBULAR STAND 41" HIGH -- 183 $207.00CM-D DELUxE STAND 44" HIGH -- 405 497.00

DC-20/FC-85♦

155DRUM


ENTLP Tank TruckFinally an easy answer to lifting, storing, and transporting problems associated with LP tanks. This all-in-one cart will allow the user to transport LP tanks to the location where they are needed. The built-in crane can be used to safely load full tanks into fork trucks. The crane pivots 360° for maximum versatility. The crane boom is raised and lowered with a manual hand pump hydraulic lift. The tank attachment at the end of the boom automatically clamps to each end of the cylinder. The built-in racks are ideal for LP tank storage -- racks store two tanks in the vertical position and four tanks in the horizontal position. Each unit includes a push handle with two rigid and two swivel casters for easy portability. Heavy-duty welded steel construction with a painted finish.

Welding Cylinder Torch CartDesigned to contain and transport cutting torch essentials to where they are needed. Includes tank storage compartments, torch holding brackets, torch holding box, overhead crane lifting point, two handles, and fork pockets. Unit rolls smoothly on two 10" x 3½" pneumatic wheels. Welded steel construction with yellow painted finish.

Raise with hoist, lift with fork truck or manually push around.

Oil Filter CrushersRecycle used filters and oil quickly, safely, and easily.The CrushMaster 1 oil filter crusher operates on normal shop air, delivers over 13,000 lbs. of crushing force at 120 PSI, accommodates all standard oil filters, and was designed for high-volume use. Solid steel-plate construction and built-in safety features assure years of safe, maintenance-free operation. Will crush up to four automotive spin-on filters at one time. Crushing chamber door is prevented from opening if the ram is in any position other than fully raised. Can be connected to a variety of waste oil containers.

The CrushMaster 2 is designed for heavy-duty use, and will accommodate both standard size filters and heavy-duty truck filters up to 16" high. Built-in operator convenience and safety features include waste oil drain connections, easily located on/off switch for safe operation, and heavy-duty totally enclosed fan cooled 4HP motor delivering 37,500 pounds of crushing force. Electric-hydraulic operation.

Order optional stands for complete package.The Tubular Stand accommodates model CM-1. Requires 29"W x 22½"D of floor space.

The Deluxe Stand accommodates both the CM-1 and CM-2. It is designed with a heavy-duty grated top for drainage of filters before crushing. The floor space required is 30"W x 26"D. Also allows for placement of 55-gallon drum, sold separately, under crusher to contain oil.

model CM-1Shown with Optional

Tubular Stand, model CM-T

model CM-2Shown with Optional

Deluxe Stand, model CM-D

New

134 Hydraulic Drum Crusher/Compactor · Hydraulic Drum Crusher/Compactor Crushes 55-gallon steel...

Documents

Transcript of 134 Hydraulic Drum Crusher/Compactor · Hydraulic Drum Crusher/Compactor Crushes 55-gallon steel...