133840026 OSN 6800 Electronic Document

7/22/2019 133840026 OSN 6800 Electronic Document

1/159

HUAWEI TECHNOLOGIES CO., LTD.

www.huawei.com

Huawei Confidential

Security Level: INTERNAL2009-1-23

OptiX OSN 6800Hardware Description


2/159

Page1Copyright 2007 Huawei Technologies Co., Ltd. All rights reserved.

Forward

OptiX OSN 6800 is future-oriented according to the

development trend of metropolitan area network (MAN)with IP as the core.

OptiX OSN 6800 achieves dynamic optical layer

grooming and flexible electrical layer grooming with

brand-new architecture.


3/159


Learning Guide

Before learn this course, you should have:

Known WDM Basic Principle

Studied OTN Basic Knowledge


4/159


References

OptiXOSN 6800 Product Description

OptiXOSN 6800 Hardware Description


5/159


Objectives

Upon completion of this course, you will be able to:

Describe the position and networking ability of OptiX OSN

6800

List the main functions and features of OptiX OSN 6800

Outline the layout of OptiX OSN 6800 subrack

Generalize the categories of boards

List the main functions and features of the boards


6/159


Contents

1. Network Application

2. Functions and Features

3. Cabinet, Subrack and Frame

4. Boards


7/159


Contents


1.1 System Architecture

1.2 Position in Networks

1.3 Networking and Applications


8/159


System Architecture

Optical and Electrical Grooming Architecture

Optical Grooming

FOADM

ROADM

Electrical Grooming

L1 electrical layer

L2 electrical layer

Client service process ing

Electrical layer grooming

Control plane bas ed on GMPLS

Packet

FOADM/ROADM

Line-side processing

OT

U

Colore

din

terfa

ce

Electrical layer : L2

Optical layer : L0

Electrical layer : L1

GMPLS: Generalized m ultiprotocal label s witching


9/159


Network Position

OptiX OSN 6800 is mainly used in:

Area Backbone

Local networks

Metro core layer

Metro convergence layer


10/159


OptiX OSN 6800 supports Point to Point, Chain, Ring and

Mesh network. Point to Point

Chain

Networking and Applications

OTM OTM

OTM OTMOADM


11/159



Ring

Because of its excellent survivability, ring network is a dominant

networking mode in MAN DWDM network planning.

OADM

OADM

OADM OADM


12/159



Ring with chain

OTM

OADM

OADM

OADM OADM


13/159



Tangent rings

OADM

OADM

OADM OADM

OADM

OADM

OADM OADM


14/159



Intersecting rings

OADM

OADMOADM

OADMOADM

OADM


15/159



Mesh Network

No node bottleneck, flexible and good expandability

Ready for ASON

OADMOADMOADM

OADM OADM

OADM OADM


16/159


Contents



3. Cabinet, Subrack and Frames

4. Boards


17/159


Contents


2.1 Optical Layer Technology

2.2 Electrical Layer Technology

2.3 Service Access

2.4 Guaranteed Reliability

2.5 Service Processing and Transmission


18/159


Optical Layer Technology

Wavelength Grooming Ability

Distribution solutions of medium wavelength resource of WDMequipment include FOADM and ROADM

Realizes intra-ring two-dimensional grooming and inter-ring

multi-dimensional grooming

Supports DWDM and CWDM

DWDM:40 (2.5G / 10G / 40G

CWDM:18 2.5G

Integrated System and Open System Compatibility


19/159


Electrical Layer Technology

Electrical Layer Grooming Capacity

Centralized cross-connection of GE services, ODU1 signals viathe XCS board.

Distributed cross-connection of GE services, ODU1 signals and

Any services via the dual boards.

L2 electrical layer switching based on VLAN and Stack

VLAN.


20/159


Service Access

OptiX OSN 6800 can access multi-services:

SDH/ SONET

POS

ATM

Ethernet

SAN

OTN

Video and others


21/159


Guaranteed Reliability

Equipment Level Protection

Input power supply 1+1 backup

Cross-connect board 1+1 protection

SCC protection

1+1 protection

External memory for NE configuration data backup

Secondary power protection for OTU


22/159


Guaranteed Reliability Network Level Protection

Optical line protection

Optical channel protection

Subnetwork connect protection (SNCP)


23/159


Service Processing and Transmission

OTN Processing

OSC and ESC

FEC Function

Tunable Wavelengths

Adopts 10Gbit/s, 5Gbit/s and 2.5Gbit/s OTUs

Main/Slave Subrack Unified Management

Maximum of seven slave subrack under one main subrack


24/159


Contents




4. Boards


25/159


Contents


3.1 Cabinet3.2 Subrack

3.3 Frame


26/159


Cabinet

OptiX OSN 6800 can be installed in:

ETSI 300mm rear column cabinet Standard ETSI 300 mm cabinet

23-inch open rack

43Quantity of configurable subracks in a Standard ETSI300mm cabinet

44Quantity of configurable subracks in a ETSI 300mm

rear column cabinet

Quantity of configurable subracks in a 23-inch open rack (7 feet high): 4

2.6m2.2mItem


27/159


Cabinet

DC Power Distribution Box

Input interface area is divided into part A and part B Accesses four 48 V DC inputs, two for working and two for

protection, so as to achieve the load partition power distribution

Six power output interfaces (each part provides six outputs formutual backup)

Maximum Power Consumption (full configured) :3400W

Two ways to connect the input terminals based on the working

current


28/159


Cabinet

DC Power Distribution Box

NEG2(-)

INPUT

RTN2(+)RTN1(+) NEG1(-) NEG2(-)

INPUT

RTN2(+)RTN1(+) NEG1(-)

SW 1 SW 3SW 2 SW 4

ON

OFF

SW 5 SW 6 SW 1 SW 3SW 2 SW 4

ON

OFF

SW 5 SW 6

OUTPUT1 2 3 4 5 6

OUTPUT

1 2 3 4 5 6

1 2 3

4 4

2 13

Power switch4Grounding screw2

Input cable terminal3Output cable terminal1


29/159


Subrack

Subrack Front Layout:

Indicators, Board area, Fiber cabling area, Fan Tray Assembly,

Air Filter and Interface area.

30ARated working current

850WMax power consumption

(full configuration)

-48V/-60V DC (12)Working voltage range

400 (H) 487 (W) 295 mm (D)Dimensions

SpecificationItem


30/159


Fan Tray Assembly

Air Filter

I

U

#

1

6

I

U

#

1

5

I

U

#

1

4

I

U

#

1

3

I

U

#

1

2

I

U

#

1

1

I

U

7

I

U

#

8

I

U

#

7

I

U

#

6

I

U

#

5

I

U

#

4

I

U

#

3

I

U

/

X

C

S

#

1

0

I

U

#

2

I

U

#

1

I

U

/

X

C

S

#

9

I

U

/

S

C

C

#

1

7

Interface Area

P

I

U

A

U

X

S

CC

#

1

8

P

I

U

9U

Fiber Cabling

Slot 1-17 can be usedforOTU/OADM/OA/OSC

XCS 1+1 backup SCC standby slotsoptional

Power Interface unit

Inter-subrackcommunication andsystem auxiliary slot

System control andcommunication

Subrack


31/159


Subrack Dual Slots

OptiX OSN 6800 provides centralized cross-connection. ODU1 signal and GE service

OptiX OSN 6800 provides distributed cross-connection through

dual slots. ODU1 signal, GE service and Any service (100Mbit/s2.5Gbit/s)

Dual slots:

7

3

21 IU7&IU84IU1&IU2

IU15&IU16

IU13&IU146IU5&IU6

IU11&IU125IU3&IU4


32/159


Interfaces in the interface area

COM: Commissioning interface

ETH3: Inter-subrack communication interface

ALMO1ALMO4: Alarm output and cascading interface

SERIAL: OAM interface

ALMI1, ALMI2: Alarm input interface

LAMP1, LAMP2: Subrack alarm output and cascading interface

COM ETH3 ALMO1ALMO2ALMO3ALMO4 SERIAL ALMI1 ALMI2LAMP1LAMP2

Subrack


33/159


Frame Fiber Spooling Frame

Coil up the redundant fiber jumpers1

2

3

45

6

Frame body6Front panel of tray3

Fiber outlet5Tray2

Fiber-spoolingpost4Grommet1


34/159


Contents1. Network Application



4. Boards


35/159


Contents4. Boards

4.1 Overview of Boards

4.2 Optical Transponder Unit

4.3 Tributary Unit and Line Unit

4.4 Cross-connect Unit

4.5 Optical Multiplexer and Demultiplexer Unit

4.6 Optical Add and Drop Multiplexing Unit

4.7 Optical Amplifying Unit

4.8 System Control and Communication Unit

4.9 Optical Supervisory Channel Unit

4.10 Other Units


36/159


Overview of Boards Four laser safety levels

>27.00 dBm (>500.00 mW)Class 4

22.15 dBm ~ 27.00 dBm (164.00 mW ~ 500.00 mW)Class 3B

10.00 dBm ~ 22.15 dBm (10.00 mW ~ 164 mW)Class 1M


37/159


Overview of Boards Bar Code for Boards

On the front panel of each board

Includes the BOM code, delivery information, board version,

board name, board characteristic code and etc.

2102313242 1059000003 -19210PAS

BOM

Product information

Board version

Board name

Characteristic Code

TN11 L4G


38/159


Overview of Boards Bar Code for Boards

Characteristic code for a DWDM OTUe.g.L4G

19210 P A SPIN-Positive Intrinsic NegativeP

APD-Avalanche Photo DiodeA

DWDM side receiving optical moduleType

Intra-office, 2kmI

Short haul, 10kmS

850nm, Multi-modeM

Long haul, 20kmL

Client side transmitting distanceType

DWDM side transmittingoptical module

DWDM-side centralfrequency:192.10TH

z


39/159


Overview of Boards Board Category

Board category

Optical supervisory channel unitCross-connect unit

System control and communication

unit

Tributary unit and Line unit

Spectrum analyzer unitFOADM unit

Optical protection unitOptical multiplexer and demultiplexer unit

Variable optical attenuator unitROADM unit

Optical amplifying unitOptical transponder unit


40/159


Optical Transponder Unit Board list

Occupied

slots

IU1~IU8 and IU11~IU16



Valid slots

4-channel multi-rate (100Mbit/s-2.5Gbit/s)

wavelength conversion unit, single/dual fed

and single/selective receiving

2 x GE unit, single / dual fed and single

/selective receiving

Line wavelength conversion unit with 4xGE

line capacity

Board description

1LQMS /

LQMD

1LDGS /

LDGD

1L4G

Board

name


41/159


Optical Transponder Unit Board list

Occupied

slots

IU1IU17

IU1IU17

IU1IU17

IU1IU17

Valid slots

Arbitrary rate (16Mbit/s-2.5Gbit/s) dual-

wavelength conversion board

Arbitrary rate (16Mbit/s-2.5Gbit/s) wavelength

conversion board (single / double transmit)

10 Gbit/s wavelength conversion relay unit

10 Gbit/s wavelength conversion unit

Board description

1LWXS /

LWXD

1LSXR

1LSX

Board

name

1LWX2


42/159


Optical Transponder Unit Front Panel

See the right picture, (e.g. LDGD)

Indicators

All OTUs provide four indicators

L D G D

L D G D

S T A TA C TP R O GS R V

C L A S S 1L A S E R

P R O D U C T

OUT1

IN1

OUT2

IN2

TX1

RX1

TX2

RX2

TX/RX

Client Side

IN/OUT

WDMSide

Red, greenBoard software status

indicator

PROG

Red, green, yellowService alarm indicatorSRV

GreenService active status indicatorACT

Red, greenBoard hardware status

indicator

STAT

ColorNameIndicator


43/159


Optical Transponder Unit LDGD

2xGE unit, concurrent sending and selective receiving

realizes the conversion between two GE signals and

standard WDM signals

Type of the optical interface: LC

Laser Safety Level: Class 1

L D G D

L D G D


C L A S S 1

L A S E R

P R O D U C T

OUT1

IN1

OUT2

IN2

TX1

RX1

TX2

RX2


44/159



Functional modules and signal flow

Control and communication module

SCC

Backplane

GE

Cross-connect andservice processing

module

Client-side

opticalmodule

GE

GE

WDM-side

opticalmodule

STM-16/OTU1

STM-16/OTU1

Client side WDM side


45/159



Functions and Features

Client-side service: GE

Cross-connect capabilities:

Supports the transmission of 4 GE signals to the XCS and 2 GE

signals to the dual slots through the the backplane.

Provides the OTN interface on WDM-side

Supports the DWDM and the CWDM specifications

Supports the tunable wavelength optical module


46/159




ESC function

Adopts FEC encoding compliant with the ITU-T G.975

Protection scheme

SW SNCP

Client-side 1+1 protection

Intra-OTU 11 protection

Automatic Laser Shutdown (ALS) function


47/159


Optical Transponder Unit L4G

Line wavelength conversion unit with 4xGE line capacity

Converges up to 6 GE service signals into 4 GE service

signals and multiplexes these 4 signals into an OTU

5G/FEC 5G signal.



L 4 G

L 4 G


C L A S S 1

L A S E R

P R O D U C T

TX2

RX2

TX

3

RX

3

TX4

RX4

TX5

RX

5

TX

6

RX

6

OUT

IN

TX1

RX1


48/159




OTN 5G

OTU 5G/FEC 5G

WDM-sideopticalmodule


SCC


Backplane

GE

Cross-

connect andservice

processingmodule

Client-sideopticalmodule

GE

GE

6

6

OTU 5G/FEC 5G6

6

L2mode

4

4


49/159






Supports the transmission of 8 GE signals to the XCS and 4 GE

signals to the dual slots through the the backplane.


Supports DWDM specification



50/159




ESC function


Protection scheme

SW SNCP

VLAN SNCP

Client-side 11 protection

ALS function


51/159


Optical Transponder Unit LQMS

4-channel multi-rate (100 Mbit/s-2.5 Gbit/s) wavelength

conversion unit, single fed and single receiving

Multiplexes 4 signals at the rate between 100 Mbit/s

and 2.5 Gbit/s into a 2.5 Gbit/s signal.



L Q M S

L Q M S


C L A S S 1

L A S E R

P R O D U C T

RX2

TX

3

RX

3

TX4

RX4

O

UT

IN

TX1

RX1

TX2


52/159




OTU1

OTU1


SCC

Backplane


module

Client-side

opticalmodule

WDM-side

optical

module

100Mbit/s-2.5Gbit/s 4

4100Mbit/s-2.5Gbit/s

4

4

100Mbit/s-2.5Gbit/sClient side WDM side


53/159




Client-side service:

STM-16,STM-4,STM-1,OC-48,OC-12,OC-3,

FC200,FC100,GE,FE,ESCON,DVB-ASI,FICON,FICON Express

Cross-connect capabilities: Supports the transmission of four optical signals at the rate between

100 Mbit/s and 2.5 Gbit/s to the dual slots





54/159




ESC function


Protection scheme:

SW SNCP


ALS function


55/159


Optical Transponder Unit

LSX

10 Gbit/s wavelength conversion unit

Maps one channel of 10Gbit/s service signals into

OTU2 or OTU2v signals and realizes the conversion

between the 10Gbit/s service signal and standard

DWDM signal.



L S X

L S X

C L A S S 1

L A S E R

P R O D U C T


OUT

IN

TX

RX


56/159



LSX


WDM-

sideopticalmodule


SCC

Serviceprocessing

module

Client-

sideopticalmodule

10GE LAN/10GE WAN/STM-64/OC-192/OTU2 OTU2/OTU2v

OTU2/OTU2v10GE LAN/10GE WAN/STM-64/OC-192/OTU2



57/159



LSX



OC-192,STM-64,10GE LAN,10GE WAN,OTU2

Cross-connect capabilities: None

Provides the OTN interfaces on WDM-side and client side




58/159



LSX


ESC function

FEC encoding:


Adopts AFEC encoding compliant with the ITU-T G.975.1

Protection scheme:


ALS function


59/159



LWXD

Arbitrary rate (16Mbit/s~2.5Gbit/s) wavelength

conversion board (double transmit).

Realizes the conversion between the signal at the rate

between 16 Mbit/s and 2.5 Gbit/s and standard WDM

signal.

Concurrently sending and selective receiving at WDM-

side



L W X D

L W X D

C L A S S 1

L A S E R

P R O D U C T


TX1

RX1

OU

T1

IN1

OUT2

IN2


60/159



LWXD


OTN 5G

WDM-side

opticalmodule


SCC

Serviceprocessing

module

Client-side

opticalmodule


16Mbit/s-2.5Gbit/s

16Mbit/s-2.5Gbit/s

16Mbit/s-2.5Gbit/s

16Mbit/s-2.5Gbit/s

O i l T d U i


61/159



LWXD



STM-16, STM-4, STM-1, OC-48, OC-12, OC-3, FC200, FC100, GE, FE,

FDDI, ESCON, DVB-ASI/SDI, FICON, FICON Express, HDTV

Cross-connect capabilities: None

OTN function: None



O i l T d U i


62/159



LWXD


ESC function

FEC encoding:



Protection scheme:


Intra-OTU 1

1 protection ALS function

T ib U i d Li U i


63/159


Tributary Unit and Line Unit

Board list





Valid slots

1

1

1

1

Occupie

d slots

4 x STM-16/OC-48/OTU1

tributary service processing

unit

TQS

2 x GE tributary service

processing unitTDG

4 x multi-rate tributary service

processing unitTQM

Tributary

unit

4 x ODU1 multiplexing OTU2

optical interface unitNS2Line unit

Board descriptionBoard

name

Board

category

T ib t U it d Li U it


64/159



Front Panel

See the picture on the right(e.g. TDG)

Indicators

All tributary units and line units provide four indicators


indicator

PROG




indicator

STAT

ColorNameIndicator

T D G

T D G

C L A S S 1

L A S E RP R O D U C T


TX1

RX1

TX2

RX2

T ib t U it d Li U it


65/159



TDG

2 x GE tributary service processing unit

Realizes the conversion between two GE optical

signals and two GE electrical signals or one ODU1

electrical signal



T D G

T D G

C L A S S 1

L A S E RP R O D U C T


TX1

RX1

TX2

RX2

Trib tar Unit and Line Unit


66/159



TDG


GE


SCC

GE

GE

Backplane


module

Client-side

opticalmodule

ODU1Client side



67/159



TDG




Supports the cross-connection of an ODU1 signal and two GE signals

between the TDG and the XCS or the paired board through thebackplane.

Protection scheme

SW SNCP

ODUk SNCP


ALS function



68/159



TQM

4 x multi-rate tributary service processing unit

Realizes the conversion between four optical signals at

the rate between 100 Mbit/s and 2.5 Gbit/s and four

client-side electrical signals or one ODU1 electrical

signal.



T Q M

T Q M


C L A S S 1L A S E R

P R O D U C T

RX2

TX

3

RX

3

TX4

RX4

TX1

RX1

T

X2



69/159



TQM



SCC

Backplane

Cross-connect and serviceprocessing module

Client-sideopticalmodule

100Mbit/s-2.5Gbit/s 4

4100Mbit/s-2.5Gbit/s

100Mbit/s-2.5Gbit/s ODU1

4

4

Client side



70/159



TQM



STM-16,STM-4,STM-1,OC-48,OC-12,OC-

3,FC200,FC100,GE,FE,ESCON,DVB-ASI,FICON,FICON Express


Supports the cross-connection of one ODU1 signal between the TQM

and XCS or the paired board.

Supports the cross-connection of four signals at the rate between 100Mbit/s and 2.5 Gbit/s between the boards in dual slots



71/159



TQM


Protection scheme:

SW SNCP

ODUk SNCP


ALS function



72/159



TQS

4 x STM-16/OC-48/OTU1 tributary service processing

unit

Realizes the conversion between four STM-16/OC-

48/OTU1 optical signals and four ODU1 electrical signals



T Q S

T Q S


C L A S S 1

L A S E R

P R O D U C T

RX2

TX

3

RX

3

TX4

RX4

TX1

RX1

TX

2



73/159



TQS


ODU1


SCC

Backplane


module

Client-side

opticalmodule

STM-16/OC-48/OTU1 4

4STM-16/OC-48/OTU1

4

4

Client side



74/159



TQS



STM-16,OC-48,OTU1


Supports the cross-connection of four ODU1 signals between the TQS

and XCS or the paired board

Provides the OTN interface on Client-side

ESC function



75/159



TQS



Protection scheme:

ODUk SNCP


ALS function



76/159



NS2

4 x ODU1 multiplexing OTU2 optical interface unit

Maps four ODU1 signals sent from XCS or the paired

board into an OTU2 signal.



N S 2

N S 2

C L A S S 1

L A S E R

P R O D U C T


OUT

IN



77/159


y

NS2


WDM-sideopticalmodule


SCC

Backplane

ODU1


moduleOTU2

OTU2

WDM side



78/159


y

NS2


Client-side service: None


Supports the cross-connection of four ODU1 signals between the NS2

and XCS or the paired board.






79/159


y

NS2


ESC function

FEC encoding:



Protection scheme:

ODUk SNCP

ALS function

Cross-connect Unit


80/159


Board list

Cross-connect and clock unitXCSCross-connect unit

Board descriptionBoard nameBoard category

Cross-connect Unit


81/159


XCS

Cross-connect and clock unit

Realizes the cross-connection of services

Occupies one slot, IU9 / IU10

Indicators

X C S

X C S



indicator

PROG




indicator

STAT

ColorNameIndicator

Cross-connect Unit


82/159


XCS


Cross-connect function:

Supports the Centralized grooming of ODU1 signals or GE services.

Supports a maximum cross-connect and grooming capacity of 320

Gbit/s for ODU1 signals.

Supports a maximum cross-connect and grooming capacity of 160

Gbit/s for GE services.

Provides 1+1 hot backup

Switching mode

Manual switching and auto switching

Non-revertive switching only

Optical multiplexer and demultiplexer unit


83/159


Board list

IU1~IU17

IU1~IU17

IU1~IU17

IU1~IU17

IU1~IU17

Valid slots

1

3

3

3

3

Occupied

slots

Fiber interface unitFIU

40-channel multiplexing unit with VOAM40V

40-channel multiplexing unitM40

40-channel demultiplexing unit with

VOA

D40V

40-channel demultiplexing unitD40

Optical

multiplexerand

demultiplexer

unit


name

Board

category



84/159


Front Panel

See the picture on the right (e.g. D40)

Indicators

All Optical multiplexer and demultiplexer unit

provide four indicators


indicator

PROG




indicator

STAT

ColorNameIndicator

D40

D40

STATACTPROGSRV

CLASS 1

LASERPRODUCT

D01D02D03D04D05D06D07D08D09D10

D11D12D13D14D15D16D17D18D19D20

D21D22D23D24D25D26D27D28D29D30

D31D32D33D34D35D36D37D38D39D40

196.00195.90195.80195.70195.60195.50195.40195.30195.20195.10

195.00194.90194.80194.70194.60194.50

194.20194.10

194.40194.30

194.00193.90193.80193.70193.60193.50

193.20193.10

193.40193.30

193.00192.90192.80192.70192.60192.50

192.20192.10

192.40192.30

D1

5

D1

6

D17

D1

8

D1

9

D2

0

D21

D22

D2

3

D24

D1

3

D2

5

D2

6

D14

D01

D02

D03

D04

D05

D06

D07

D08

D09

D1

0

MON

D11

D12

IN

D2

9

D30

D31

D32

D33

D34

D35

D36

D37

D38

D2

8

D39

D4

0

D27



85/159


D40/D40V

40-channel demultiplexing unit without/with VOA

Demultiplexes main path signal to a maximum of 40

channels of service.



Adjusts the optical power of each signal after

demultiplexing (D40V).

D40

D40

STATACTPROGSRV

CLASS 1

LASERPRODUCT

D01D02D03D04D05D06D07D08D09D10

D11D12D13D14D15D16D17D18D19D20

D21D22D23D24D25D26D27D28D29D30

D31D32D33D34D35D36D37D38D39D40

196.00195.90195.80195.70195.60195.50195.40195.30195.20195.10

195.00194.90194.80194.70194.60194.50

194.20194.10

194.40194.30

194.00193.90193.80193.70193.60193.50

193.20193.10

193.40193.30

193.00192.90192.80192.70192.60192.50

192.20192.10

192.40192.30

D1

5

D1

6

D17

D1

8

D1

9

D2

0

D21

D22

D2

3

D24

D1

3

D2

5

D2

6

D14

D01

D02

D03

D04

D05

D06

D07

D08

D09

D1

0

MON

D11

D12

IN

D2

9

D30

D31

D32

D33

D34

D35

D36

D37

D38

D2

8

D39

D4

0

D27



86/159


D40/D40V


Supports C-even band wavelength

Online optical performance monitoring at IN port.

The ratio of MON port and IN port :10/90 (9.5dB)

Attenuation range of D40V: 0dB15dB



87/159


M40/M40V

40-channel multiplexing unit without/with VOA

Realizes the multiplexing of a maximum of 40

standard WDM signals into one fiber.

Type of the optical interface: LC Laser Safety Level: Class 1

Adjusts the optical power of each signal before

multiplexing (M40V).

M40

M40

STATACTPROGSRV

CLASS 1

LASER

PRODUCT

M01M02M03M04M05M06M07M08M09M10

M11M12M13M14M15M16M17M18M19M20

M21M22M23M24M25M26M27M28M29M30

M31M32M33M34M35M36M37M38M39M40

196.00195.90195.80195.70195.60195.50195.40195.30195.20195.10

195.00194.90194.80194.70194.60194.50

194.20194.10

194.40194.30

194.00193.90193.80193.70193.60193.50

193.20193.10

193.40193.30

193.00192.90192.80192.70192.60192.50

192.20192.10

192.40192.30

M1

5

M1

6

M17

M1

8

M1

9

M2

0

M21

M22

M2

3

M24

M1

3

M2

5

M2

6

M14

M01

M02

M03

M04

M05

M06

M07

M08

M09

M1

0

MON

M11

M12

OUT

M2

9

M30

M31

M32

M33

M34

M35

M36

M37

M38

M2

8

M39

M4

0

M27



88/159


M40/M40V


Support C-even band wavelength

Online optical performance monitoring at OUT port

The ratio of MON port and OUT port :10/90 (9.5dB)

Attenuation range of M40V: 0dB15dB

F IU



89/159


FIU

Fiber interface unit

Realizes the multiplexing and demultiplexing of

signals transmitted by the main path and the

optical supervisory channel.


Laser Safety Level: Class 1M

Functions and features The ratio of MON port to OUT port: 1/99 (20dB).

F IU

F IU


MON

OUT

IN

TC

RC

TM

RM

C L A S S 1

L A S E R

P R O D U C T



90/159


FIU


Demult iplexing

module

OUT

IN

Multiplexingmodule

TM

TC

RC

RMOpticalsplitter M ON

Control and communicationmodule

SCC

Line opticalsignal

Supervisorychannel

Ma in path

Ma in path

Supervisorychannel

Line opticalsignal

OADM Unit


91/159


Board list

IU1~IU17

IU1~IU17

IU1~IU17

IU1~IU17

IU1~IU17

Valid

slots

1

1

2

1

1

Occupie

d slots

CWDM 4-channel optical add/drop multiplexing

unit

CMR4

CWDM 2-channel optical add/drop multiplexing

unit

CMR2

8-channel optical add/drop multiplexing unitMR8



Fixed

OADM

Unit

Board description

Boar

d

name

Board

categor

y

OADM Unit


92/159


Board list

IU1~IU17

IU1~IU17

IU1~IU17

IU1~IU17

Valid slots

1

2

2

3

Occupied

slots

9-Port ROADM multiplexing boardRMU9

9-port wavelength selective

switching demultiplexing board

WSD9

9-port wavelength selective

switching multiplexing board

WSM9

Reconfigurable optical adding boardROAM

Reconfigurabl

e OADM Unit

Board description

Boar

d

name

Board

category

OADM Unit

C M R 2 R M U 9


93/159


Indicators

All Fixed OADM units provide one indicator.

All Reconfigurable OADM units provide four indicators.

C M R 2

S T A T

L A S E RR A D I A T I O N

D O N O T V I E W D I R E C T L Y

W I T H O P T I C A L

I N S T R U M E N T S

CL ASS 1 M L ASERP R O D U C T

OUT

IN

MO

MI

D1

A1

D2

A2


indicator

PROG




indicator

STAT

ColorNameIndicator


indicator

STAT

ColorNameIndicator

R M U 9


C L A S S 1

L A S E R

P R O D U C T

MON

OM

ONI

OUT

EXPI

TOA

ROA

AM1

AM2

AM

3

AM4

AM

5

AM

6

AM7

AM

8


94/159

OADM Unit


95/159


MR2


OADM opticalmodule

IN

OUT

MO

MI

D1 D2 A1 A2

OADM Unit

C M R 2

S T A T


96/159


CMR2

CWDM 2-channel optical add/drop multiplexing unit

Realizes the adding/dropping and multiplexing of two signals



C M R 2

S T A T





C L A S S 1 M L A S E RP R O D U C T

OUT

IN

MO

MI

D1

A1

D2

A2

OADM UnitR M U 9

S T A T


97/159


RMU9

ROADM multiplexing unit.

Adds eight single-channel signal or multi-channel

signals to the main path.



R M U 9


C L A S S 1

L A S E R

P R O D U C T

MON

OM

ONI

OUT

EXPI

TOA

ROA

AM1

AM2

AM

3

AM4

AM

5

AM

6

AM7

AM

8

OADM Unit


98/159


SCC

AM 1 AM 2

Coupling module

Control and comm unication mo dule

AM 3 AM 4 AM 5 AM 6 AM 7 AM 8

Optical m ult iplexing mo dule

VO A VO A VO A VO A VO A VO A VO A VO A

Splitter

Splitter

RO A

TO A

EXPI M O N I

M O N O

O UT

RMU9


OADM UnitR M U 9

S T A TA C T


99/159


RMU9


8 colorless adding interface, dynamic input.

The TOA interface can be connected to optical amplifying

unit to realize cascading. If cascading is not needed, the

optical signals should be directly sent to the ROA interface.

Online optical performance monitoring at TOA and EXPI

ports.

The ratio of MONO port to TOA port and MONI port to EXPIport: 3/97 (15dB).

R M U 9

A C TP R O GS R V

C L A S S 1

L A S E R

P R O D U C T

MON

OM

ONI

OUT

EXPI

TOA

ROA

AM1

A

M2

AM

3

AM4

AM

5

AM

6

AM7

AM

8

OADM UnitROAM

STATACT M01 M11 M21 M31196 00 195 00 194 00 193 00


100/159


ROAM

Reconfigurable optical adding unit

Realizes the dynamic adding/dropping, pass-

through, and blocking of a maximum of 40

wavelengths with the demultiplexing board.



ROAM

ACTPROGSRV

LASERRADIATION

DONOT VIEWDIRECTLY

WITHOPTICAL

INSTRUMENTS

CLASS1M LASERPRODUCT

M01M02M03M04M05M06M07M08M09M10

M11M12M13M14M15M16M17M18M19M20

M21M22M23M24M25M26M27M28M29M30

M31M32M33M34M35M36M37M38M39M40

196.00195.90195.80195.70195.60195.50195.40195.30195.20195.10

195.00194.90194.80194.70194.60194.50

194.20194.10

194.40194.30

194.00193.90193.80193.70193.60193.50

193.20193.10

193.40193.30

193.00192.90192.80192.70192.60192.50

192.20192.10

192.40192.30

IN

OUT

M01

M02

M03

M04

M05

M06

M07

M

08

M09

M1

0

M11

M12

M1

3

M14

M1

5

M1

6

M17

M

18

M1

9

M2

0

EXP

O

M21

M22

M2

3

M24

M2

5

M2

6

M27

M

28

M2

9

M30

EXPI

M31

M32

M34

M35

M36

M37

M

38

M39

M4

0

DM

OADM Unit


101/159


ROAM


OUT

DM

EXPI

EXPO

PLC optical module

IN

SCC

M01 M02

Optical demultiplexing module


M40

Optical multiplexing module

OADM UnitR M U 9

S T A TA C T


102/159


ROAM


Used for dynamic grooming of wavelength.

Realizes the wavelength-level equilibrium and control of

optical power to flatten the spectrum for the working signals.

R M U 9

P R O GS R V

C L A S S 1

L A S E R

P R O D U C T

MON

O

MONI

OUT

EXPI

TOA

ROA

AM1

A

M2

AM

3

AM4

AM

5

AM

6

AM7

AM

8

OADM UnitWSD9

STATACTPROG


103/159


WSD9

9-port wavelength selective switching demultiplexing

board

Configured any wavelengths to any interfaces



WSD9

LASERRADIATION

DONOTVIEWDIRECTLY

WITHOPTICAL

INSTRUMENTS

CLASS1MLASERPRODUCT

PROGSRV

DM1

DM2

DM

3

D

M4

EXP

O

IN

DM

5

DM

6

MON

OMONI

DM7

DM

8

OADM Unit


104/159


WSD9


WSS optical module


IN

SCC

DM1

MONI

DM2 DM7DM3 DM4 DM5 DM6 DM8

EXPO

MONO

OADM Unit


105/159


WSD9


Multi-dimension, fully dynamic allocation of wavelengths.

Adjust the optical power of each channel.

Online optical performance monitoring in IN and EXPO

ports.

The ratio of MONI port to IN port and MONO port to EXPO port:

3/97 (15dB).

OADM Unit

S

WSM9

STATACTPROGSRV


106/159


WSM9

9-port wavelength selective switching multiplexing board

Configures any wavelengths to any interfaces



WSM9

CLASS 1

LASERPRODUCT

SRV

AM1

AM2

AM

3

AM4

OUT

EXPI

AM

5

AM

6

MON

O

MONI

AM7

AM

8

OADM Unit

WSM9


107/159


WSM9


AM1 AM2 AM7AM3 AM4 AM5 AM6 AM8

WSS optical module


SCC

OUT

MONO

EXPI

MONI

OADM Unit

WSM9


108/159


WSM9


Multi-dimension, fully dynamic allocation of wavelengths.

Adjust the optical power of each channel.

Online optical performance monitoring in OUT and EXPI

ports.

The ratio of MONO port to OUT port and MONI port to EXPI

port: 3/97 (15dB).

Optical Amplifying Unit

Board list


109/159


Board list

--

IU1~IU17

IU1~IU17

Validslots

--

1

2

Occupied slots

Case-shape Raman pump

amplifier unit for C-bandCRPC

Optical booster unitOBU1

Optical amplifying unitOAU1

Board descriptionBoard name


OAU1

OAU1STATACTPROGSRV


110/159


OAU1

Optical Amplifier Unit



Indicators

OAU1

LASERRADIATION

DO NOTVIEW DIRECTLY

WITHOPTICAL

INSTRUMENTS

CLASS1M LASERPRODUCT

TD

C

PD

C

OUT

IN

MON


indicator

PROG




indicator

STAT

ColorNameIndicator


OAU1


111/159


OAU1


EDFA optical module

Control andcommunication module

INOUT

MON

SCC

TDC RDC


OAU1


112/159


OAU1


Amplifies a maximum of 40 channels with the channel

spacing of 100 GHz at the same time.

Gain locking function

Transient control function

Continuously adjusts the gain from 20 dB to 31 dB

Online optical performance monitoring at OUT port

The ratio of MON port and OUT port :1/99 (20dB)


OBU1

O B U 1S T A TA C TP R O GS R V



113/159


OBU1

Optical Booster Amplifier Unit



Indicators

O B U 1

MON

OUT

IN

R A D I A T I O N






indicator

PROG




indicator

STAT

ColorNameIndicator


OBU1


114/159


OBU1


EDFA optical module


INOUT

MON

SCC


OBU1


115/159


OBU1


Amplifies a maximum of 40 channels with the channel

spacing of 100 GHz at the same time.

Gain locking function

Transient control function Online optical performance monitoring at OUT port

The ratio of MON port and OUT port :1/99 (20dB)

Typical gain

OBU1C01: 20dB, for receive end

OBU1C02: 23dB, for transmit end


CRPC


116/159


CRPC

Case-shape Raman pump amplifier unit for C-band

External, case-shape amplifier

Types of the optical interface: LC,LSH/APC


:

WARNING: FIBERS MUSTBE CONNECTED SEFOREPOWER UP

!

AVOIDEYEORSKIN

EXPOSURETODIRECTOR

CLASS4 LASERPRODUCT

SCATTEREDRADIATION

LASERRADIATION

ALMCRPC RUN

LINESYSMON

RS232-1 RS232-2 LAN


CRPC


117/159


Indicators

:

WARNING: FIBERS MUSTBE CONNECTED SEFOREPOWER UP

!

AVOIDEYEORSKIN

EXPOSURETODIRECTOR

CLASS4 LASERPRODUCT

SCATTEREDRADIATION

LASERRADIATION

ALMCRPC RUN

LINESYSMON

RS232-1 RS232-2 LAN

redService alarm indicatorALRM

greenRunning status indicatorRUN

ColorNameIndicator


CRPC


118/159



LINESYS

Pump source module


MON

SCC


CRPC


119/159



Provides energy for the amplification of signals in the fiber.

Realizes the distributed online amplification of signals over long

distance with wide bandwidth and low noise.

Used at the receive end of the system, must be used with EDFA.

Supports long-hop and 40G OTU application.

Online optical performance monitoring at SYS port

The ratio of MON port and SYS port :1/99 (20dB)

System Control and Communication Unit

Board list


120/159


System control and communication UnitSCC

System control

and

communication

unit

System auxiliary interface unitAUX

Board descriptionBoard nameBoard category


SCC

S C C

S T A TA C TP R O GS R VP W R AP W R BP W R CA L M C


121/159


System control and communication unit

Accomplishes the service grooming, configuration

management and alarm output of a subrack.

Occupies one slot, IU17 and IU18

S C C

R E S E T

L A M P T E S T

A L M C U T

S u b R A C K _ I D


SCC

S C C



122/159


Indicators

S C C

R E S E T

L A M P T E S T

A L M C U T

S u b R A C K _ I D

Red, greenSystem power supply indicatorPWRB


Red, greenSystem power supply indicatorPWRA

Red, greenSystem power supply indicatorPWRC

Red, greenBoard software status indicatorPROG

YellowAlarm cut-off indicatorALMC


Red, greenBoard hardware status indicatorSTAT

ColorNameIndicator


SCC

S C C



123/159


Buttons

S C C

R E S E T

L A M P T E S T

A L M C U T

S u b R A C K _ I D

Used to test all the indicators in the subrackLAMP TEST

Used to cut off the audible alarmALM CUT

Used to reset the SCCRESET

FunctionButton


SCC

S C C



124/159


LED

S C C

R E S E T

L A M P T E S T

A L M C U T

S u b R A C K _ I D

The LED on the front panel is used to indicate

whether the subrack is a primary or a secondary

one when subracks are cascaded.

"0 indicates that the subrack which the SCC

placed is a primary one.

"1 to "7" indicates that the subrack which the SCC

placed is a secondary one.

Subrack_ID

FunctionLED indicator


SCC


125/159


CPU andcontrolmodule

Communicationsmodule

Clock module

Overheadprocessing

module

Other boards

Other boards

Monitoringmodule

Power supplymodule



SCC


126/159



1+1 hot backup

Supports 7 slave subracks cascading

A secondary subrack cannot be upgraded to a primary subrack

1:N power supply backup for the system.

IU18 is primary for SCC


AUX


127/159


System auxiliary interface unit

Provides the system with various auxiliary interfaces and

management interfaces.

Three-bit jumper used to set the subrack ID

Indicators

AUX

STAT

PROG

NM_ETH1

NM

_ETH2

ETH1

ETH2

Red, greenBoard software status indicatorPROG


ColorNameIndicator


AUX


128/159


Interfaces

AUX

STAT

PROG

NM

_ETH1

NM

_ETH2

ETH1

ETH2

Inter-subrack communications network

interfaces

RJ-45ETH1

Inter-subrack communications network

interfaces

RJ-45ETH2

NM interface or NM cascading interfaceRJ-45NM_ETH2

NM interface or NM cascading interfaceRJ-45NM_ETH1

FunctionTypeInterface

Optical Supervisory Channel Unit

Board list


129/159


IU1~IU17

IU1~IU17

Valid

slots

1

1

Occupied slots

Bi-directional optical supervisory channel

unitSC2

Unidirectional optical supervisory channel

unitSC1

Board descriptionBoard name


SC2

S C 2



130/159


Realizes the processing of two supervisory channels in

opposite directions



Indicators

S C 2

TM1

RM1

TM2

RM2


indicator

PROG




indicator

STAT

ColorNameIndicator


SC2


131/159



RM1 TM1

SCC

Opticalreceivingmodule

Overhead andclock processing

module

Opticaltransmitting

module

Opticalreceivingmodule

Opticaltransmitting

module

RM2 TM2


Overhead andclock processing

module


SC2


132/159



No limitation on the distance between two optical line amplifiers

Independent of the SCC

When the SCC needs to be maintained , the SC2 can still ensure the

pass-through of ECC with the two optical interfaces or the paired

board and monitor other stations.

Operating Wavelength: 1510nm

Other Units

Board list


133/159


IU1~IU1

7

IU1~IU1

7

IU1~IU1

7

IU1~IU1

7

IU1~IU17

IU1~IU1

7

IU1~IU1

7

Valid

slots

1

1

2

2

1

1

1

Occupied

slots

8-channel spectrum analyzer unitMCA8

4-channel spectrum analyzer unitMCA4Spectrum

analyzer unit

1-channel variable optical attenuator unitVA1Variable optical

attenuator unit

Sync optical channel separator unitSCS

Optical

protection unitOptical line protection unitOLP

2-channel optical path Protection unitDCP

4-channel variable optical attenuator unitVA4


name

Board

category

Other Units

OLP

O i l Li P i U i

O L P








134/159


Optical Line Protection Unit



Indicators

O L P

TO1

RI1

TO2

RI2

RO

TI


indicator

PROG




indicator

STAT

ColorNameIndicator

Other Units

OLP

F ti l d l d i l fl


135/159



Optical splitter

SCC

TI

RO

TO1TO2

RI1

RI2Optical switch


Other Units

OLP

F ti d F t

O L P








136/159



Protection Type:

optical line protection

intra-OTU 1+1 protection

client-side 1+1 protection

Protection scheme:

concurrent sending and selective receiving

single-end switching

O L P

TO1

RI1

TO2

RI2

RO

TI

Other Units

OLP


O L P








137/159



Switching Type:

Locked switching

Forced switching

Automatic switching

Manual switching

Clear switching

Priority

O L P

TO1

RI1

TO2

RI2

RO

TI

Other Units

DCP

2-channel optical path protection unit

D C P

LA S E RR A D I A T I O N




C L A S S 1 M L A S E R

P R O D U C T



138/159


2 channel optical path protection unit

Protection Type: intra-OTU 1+1 protection


Indicators

D C P

TO11

RI1

1

TO12

RI12

TO21

RI21

TO22

RI22

RO1

TI1

RO2

TI2


indicator

PROG




indicator

STAT

ColorNameIndicator

Other Units

SCS

Sync optical channel separator unit

S C S

C L A S S 1

L A S E R

P R O D U C T


139/159


Sync optical channel separator unit



Indicators

S C S

TO11

TO12

RI12

TO21

RI21

TO22

RI22

RO1

TI1

RO2

TI2

RI11


ColorNameIndicator

Other Units

SCS



140/159



Optical splitter

Optical switch

Optical splitterTI1TO11

RO1

TI2

RO2

TO12

RI11

RI12TO21TO22

RI21RI22Optical switch

Other Units

SCS


S C S

C L A S S 1

L A S E R

P R O D U C T


141/159



Protection Type:


Protection scheme:

Concurrent sending and selective receiving

single-end switching by detecting SD and SF events of the channel

Protection switching time < 50ms

S C S

TO11

TO12

RI12

TO21

RI21

TO22

RI22

RO1

TI1

RO2

TI2

RI11

Other Units

MCA4

4-channel spectrum analyzer unit

MCA4

STATACTPROGSRV


142/159


4 channel spectrum analyzer unit



Indicators:

MCA4

IN1

IN2

IN3

IN4


indicator

PROG




indicator

STAT

ColorNameIndicator

Other Units

MCA4


MCA4

STATACTPROGSRV


143/159



Supports the following detection functions and reporting

Optical power of the channel

Central Wavelength

OSNR

Number of wavelengths in the main optical path

Used in APE function with other boards.

Supports C band

MCA4

IN1

IN2

IN3

IN4

Other Units

MCA4


MCA4

STATACTPROGSRV


144/159


Detect accuracy for optical power: 1.5dBm

Detect accuracy for OSNR: 1.5dB

Detect accuracy for central wavelength: 0.1nm

MCA4

IN1

IN2

IN3

IN4

Other Units

VA1

1-channel variable optical attenuator unit

V A 1







P R O D U C T


145/159


p



Indicators

V A 1

OUT

IN


indicator

PROG




indicator

STAT

ColorNameIndicator

Other Units

VA1


V A 1







P R O D U C T


146/159


Supports optical power adjustment and alarm monitoring

Supports the power-off protection

variable attenuation ranges: 1.5dB21.5dB

Resolution: 0.1dB

V A 1

OUT

IN

Question

How many networking topologies does OptiX OSN 6800

support ?


147/159


What are the main types of the boards in OptiX OSN 6800?

Question

Does XCS work in any slots ?


148/159


Which services are there for centralized cross-connection ?

How many services are there for distributed cross-

connection?

Summary

Position and networking ability of OptiX OSN 6800

Main functions and features of OptiX OSN 6800


149/159


OptiX OSN 6800 subrack layout

OptiX OSN 6800 board category

Main functions and features of the boards


150/159

www.huawei.comThank You

Appendix 1: Indicators

Cabinet Indicators

DescriptionStatusNameIndicator


151/159


There is no minor alarm.Off

There is a minor alarm.On (Yellow)Minor alarm indicatorminor

There is no major alarm.Off

There is a major alarm.On (Orange)Major alarm indicatormajor

There is no critical alarm.Off

There is a critical alarm.On (red)Critical alarm indicatorcritical

The cabinet is not powered on.Off

The cabinet is powered on.On (green)Power indicatorpower


Board Indicators



152/159


No service is configured. (The SRV indicator of the

XCS has no "Off".)

Off

Minor or remote alarm occurs to service.On(yellow)

Critical or major alarm occurs to service.On (red)

Service is normal, no service alarm occurs.On(green)ServiceAlarmIndicator

SRV

The board is not powered on.Off

The board hardware fails.On (red)

The board works normally.On(green)BoardHardwareIndicator

STAT


Board Indicators



153/159


The board software or software for FPGA isuploaded successfully, or the board software isinitialized successfully.

On(green)

300ms on and 300ms offBIOS booting/loading FPGA/loading unit software.

Blinkingslowly

(green)

100ms on and 100ms off

Writing FLASH.

Blinking

quickly(green)


BOOTROM check failed.

Blinking

(red)

Memory check failed/loading unit software failed/the

FPGA file is lost/the unit software is lost.

On (red)Board

SoftwareIndicato

r

PROG


Board Indicators



154/159


No power supply inputs.Off

The 48 V power supply A is faulty (lost or failed).On (red)

The 48 V power supply A is normal.On(green)

Indicatorforsystempowersupply

PWRA


Backing up the system database in patches.

Blinking

quickly(green)

The board is not in working mode.The board is in the standby mode.

Off

The board is in working mode.The board is in the active mode.

On(green)

ServiceActivatio

nIndicator

ACT


Board Indicators

Th 48 V l B i lOI di tPWRB



155/159


Give sound warning upon alarm.Off

Currently in permanent alarm cut-off status.On(green)

Alarm cutindicator

ALMC

The +3.3 V protection power is lost.On (red)

The +3.3 V protection power is normal.On

(green)

Indicator

forprotectionpo

133840026 OSN 6800 Electronic Document

Documents

Transcript of 133840026 OSN 6800 Electronic Document