1313 AND 1316 HORIZONTAL IMPACTORS CONTINUED · Cedarapids, Inc. 909 17th Street NE, Cedar Rapids,...
Transcript of 1313 AND 1316 HORIZONTAL IMPACTORS CONTINUED · Cedarapids, Inc. 909 17th Street NE, Cedar Rapids,...
Cedarapids, Inc.909 17th Street NE, Cedar Rapids, IA 52402 USATel +1 (800) 821-5600 or +1 (319) 363-3511www.cedarapids.comForm 24236 (2/08)
1300 SERIESHORIZONTAL IMPACTORS
RICH TRADITIONTerex Cedarapids has remained an industry leader for over eight
decades, and today we are more customer focused than ever.
We understand your business and your needs — Terex Cedarapids
offers crushing and screening solutions that help you get the job done.
CONTINUOUS PRODUCT IMPROVEMENTWe are continually designing, engineering and manufacturing new,
cost-effective products that meet, and exceed customer expectations
for performance, reliability, and ease of maintenance.
WHY TEREX CEDARAPIDS?• Better Products
• Better Support
• Better Distributors
• Better Customer Relationships
CONTINUEDCOMMITMENT TO OUR CUSTOMERS
Effective Date: February 2008. Product specifications and prices are subject to change without notice or obligation. The photographs and/ordrawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of thisequipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in seriousinjury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale andTerex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of TerexCorporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation inthe USA and many other countries. © 2008 Terex Corporation.
1313 AND 1316 HORIZONTAL IMPACTORS
Large feed opening
High strength flared
chrome-nickel-moly shaft
Flanged for attaching feed
adapters and curtains
Hydraulically opened frame
AR500 replaceable
frame liners
1300 SERIES HORIZONTAL IMPACTORS DESIGNED FOR PRODUCTIVITY
Quick removal primary
and secondary aprons
Spring loaded secondary
apron maintains
crusher setting
Convenient hydraulic assist
apron adjustment
Convenient access doors
Large hydraulic cylinders with
integral piloted locking valves
High chrome cast liners
on secondary apron
Massive cast manganese “monoblock”
reversible primary apron for large
feed and long life
Taconite-type
labyrinth seals
Low profile design fits
tight installations
Large spherical roller
bearings with
hydraulic removal
Balanced high inertia rotor
with one-piece impeller bars
RUGGED, DEPENDABLE, MORE PRODUCTIVE
Terex Cedarapids is known for quality crushing
equipment and the 1300 Series horizontal impact
crushers keep that tradition going.
The 1300 Series crushers with their large feed openings,
heavy duty aprons, and rugged rotors, are designed to
accept bigger feed size. The patented wedge bar system
is just one of the many features we’ve incorporated for
reliable operation and make maintenance fast and
easy. Super hard wear surfaces keep you running longer
in tough conditions. These features, along with many
others, add up to give you high production, easy
maintenance, and long life.
Productivity, quality, ease of use, long life — the
Terex® Cedarapids 1300 Series crushers are designed
to give you the maximum value on your investment.
5" (127 mm) thickone-piece castimpeller bars shown,bar and rotor designvaries by application
Replaceablerotor guards
Patented one-piece centerpull wedge keep bars tight
Large backup plate providessolid impeller bar support
Replaceable retainerbar machined intobackup plate
RUGGED ROTOR DESIGN(Primary configuration shown)
Underside feed chute
AR500 wear plates adjust
to strip rotor air stream
in secondary crushing
Large feed opening
High strength flared
chrome-nickel-moly shaft
Flanged for attaching feed
adapters and curtains
Hydraulically opened frame
AR500 replaceable
frame liners
1300 SERIES HORIZONTAL IMPACTORS DESIGNED FOR PRODUCTIVITY
Quick removal primary
and secondary aprons
Spring loaded secondary
apron maintains
crusher setting
Convenient hydraulic assist
apron adjustment
Convenient access doors
Large hydraulic cylinders with
integral piloted locking valves
High chrome cast liners
on secondary apron
Massive cast manganese “monoblock”
reversible primary apron for large
feed and long life
Taconite-type
labyrinth seals
Low profile design fits
tight installations
Large spherical roller
bearings with
hydraulic removal
Balanced high inertia rotor
with one-piece impeller bars
RUGGED, DEPENDABLE, MORE PRODUCTIVE
Terex Cedarapids is known for quality crushing
equipment and the 1300 Series horizontal impact
crushers keep that tradition going.
The 1300 Series crushers with their large feed openings,
heavy duty aprons, and rugged rotors, are designed to
accept bigger feed size. The patented wedge bar system
is just one of the many features we’ve incorporated for
reliable operation and make maintenance fast and
easy. Super hard wear surfaces keep you running longer
in tough conditions. These features, along with many
others, add up to give you high production, easy
maintenance, and long life.
Productivity, quality, ease of use, long life — the
Terex® Cedarapids 1300 Series crushers are designed
to give you the maximum value on your investment.
5" (127 mm) thickone-piece castimpeller bars shown,bar and rotor designvaries by application
Replaceablerotor guards
Patented one-piece centerpull wedge keep bars tight
Large backup plate providessolid impeller bar support
Replaceable retainerbar machined intobackup plate
RUGGED ROTOR DESIGN(Primary configuration shown)
Underside feed chute
AR500 wear plates adjust
to strip rotor air stream
in secondary crushing
Cedarapids, Inc.909 17th Street NE, Cedar Rapids, IA 52402 USATel +1 (800) 821-5600 or +1 (319) 363-3511www.cedarapids.comForm 24236 (2/08)
1300 SERIESHORIZONTAL IMPACTORS
RICH TRADITIONTerex Cedarapids has remained an industry leader for over eight
decades, and today we are more customer focused than ever.
We understand your business and your needs — Terex Cedarapids
offers crushing and screening solutions that help you get the job done.
CONTINUOUS PRODUCT IMPROVEMENTWe are continually designing, engineering and manufacturing new,
cost-effective products that meet, and exceed customer expectations
for performance, reliability, and ease of maintenance.
WHY TEREX CEDARAPIDS?• Better Products
• Better Support
• Better Distributors
• Better Customer Relationships
CONTINUEDCOMMITMENT TO OUR CUSTOMERS
Effective Date: February 2008. Product specifications and prices are subject to change without notice or obligation. The photographs and/ordrawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of thisequipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in seriousinjury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale andTerex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of TerexCorporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation inthe USA and many other countries. © 2008 Terex Corporation.
1313 AND 1316 HORIZONTAL IMPACTORS