7

Cat No Range Graduation Item No

1251MEA-12/300 300mm / 12”

0.02mm / 0.001”

BR5860

1251MEA-20/500 500mm / 20” BR587

1251MEA-24/600 600mm / 24” BR588

1251MEA-40/1000 1000mm / 40” BR5890

1251MEA-20/500

3753 series - elecTroNic DiGiTAl DePTh GAuGes & Accessories

Cat No Range Graduation / Description Item No

3753AZ-6/150 150mm / 6”

0.01mm / 0.0005”

DR9450

3753AZ-8/200 200mm / 8” DR9453

3753AZ-12/300 300mm / 12” DR9456

3648-180 180mm Base Extension With Screws DR94250

3648-260 260mm Base Extension With Screws DR94251

3648-320 320mm Base Extension With Screws DR94252

3753A-6/150

Long range vernier caliper complete with fineadjustment thumb wheel.

• Sharp, black graduations on the satin finished bar.

• Fine adjustment thumb wheel.

This light, portable and easy to use depth gauge is reliable and accurate for measurements to 0.01mm (0.0005”).

• Hardened stainless steel body and slide for long life.

• Fine adjustment thumb wheel.• Sharp, easy to read LCD display.• Hook attachment is furnished with the

gauge, making it possible to take readings from the edge of the workpiece to edges of slots, grooves, shoulders and other ID length dimensioning.

• Lock to hold the slide in position.• Instant inch/mm conversion.

1251 series - loNG rANGe verNier cAliPers

CalipErS & DEpTH GauGES

Cat No SizeRange Depth Of

JawsWidth Of

Nibs ClosedGraduation

Item NoOutside Inside Slide Stock

1025ME-130 130mm / 5” 0-96mm/0-3.3/4”

6-100mm/1/4-4”

36mm/1.3/8”

6mm/0.236”

1/2mm64ths mm DP767

1025 series - PocKeT sliDe cAliPer

448 series - verNier DePTh GAuGes

These are easy to use, very accurate depth gauges. They are designed for measuring the depths of holes, slots and recesses and for inspecting jig, fixtures and die work. They are also ideal for measuring from a plane surface to toolmakers’ buttons for locating centre distances.

• Heads are hardened, ground and lapped.• Measuring blades are hardened and

ground and have accurate and sharp machine divided graduations.

• Slide lock nut to hold measurement.• Screw type adjusting nut allows for fine

measuring adjustment.• All metric graduations read to 0.02mm with

the bar graduated in 0.5mm increments.

Cat No Range Blades Furnished Base Length x Width Item No

448MEZ-6 0 - 150mm / 0 - 6” One (150mm / 6”)

70 x 6.35mm /

2.3/4” x 1/4”

CV732

448MEZ-12 0 - 300mm / 0 - 12” One (300mm / 12”) CV734

448MEZ-612 0 - 300mm / 0 - 12” Two (150mm / 6” & 300mm / 12”) CV752

Cat No Range Graduation Item No

B5000BZ-20/500 500mm / 20”

0.01mm / 0.0005”

DR9600

B5000BZ-24/600 600mm / 24” DR9603

B5000BZ-40/1000 1000mm / 40” DR9606

• Strong, lightweight and stable carbon fibre bar.

• Ti N coated stainless steel jaws.• Tight, smoothly fitted slides for maximum

accuracy and easy adjustment.• Locknut to hold measurement.• Screw-type adjusting nut allows for fine

measuring adjustment.

• Large easy to read display with resolution 0.01mm/0.0005”.• MM/Inch conversion.• Output port.• Two preset modes to install any reading at

any point.• Ability to zero the reading at any position.• Packed in a wooden case.

5000 series - cArboN fibre cAliPers

Cat No Range Graduation Item No

5006BZ-14/350Internal: 42-350mm / 1.654”-13.780”

External: 0-270mm / 0”-10.630”0.01mm / 0.0005” DR9620

• Stainless steel construction.• Interchangeable ball contact standard.• Other contacts available on special

request.• Tight, smoothly fitted slides for maximum

accuracy and easy adjustment.• Lock nut to hold measurements.• Large easy to read display with resolution

0.01mm/0.0005”.

• MM/Inch conversion.• Output port.•Two preset modes to install any reading at

any point.• Ability to zero the reading at any position.• Packed in a wooden case.

5006 series - iNTerNAl / exTerNAl cAliPer