12 Pass Rollformer for the production of Window Profile ... · The cut-off shear is positioned by a...
1
Performance Line speed : 50m/min Max component length : 6 metres Accuracy : ± 0.5mm Coil - Galvanised Mild Steel 2000kgs x 300mm x 2mm & 1200mm O/D NON MOTORISED DECOILER Double sided Non-Motorised Decoiler with Back Tension and Safety Brakes (2t Capacity). F1(1.5”) 12 PASS DEDICATED ROLLFORMER 12 pass dedicated rollform mill with 1.5” diameter shafts. Variable speed A C drive Adjustable upper rolls to set the correct rolling pressure. An adjustable guide assembly with digital readourt is mounted prior to the rollforming head section. The rollformer is guarded by a box type mesh guard with a hinged door, for access to the rollforming head, the door is interlocked with the emergency stop circuit. MEASURING WHEEL A measuring wheel is fitted with a length measuring encoder which runs directly on the strip/section. FLYING SHEAR, BASEFRAME AND TOOLING The cut-off shear is positioned by a servo control system which calculates a speed match between the material and the shear assembly. The flying shear consists of a High Speed Hydraulic Block Cylinder system with a 20 tonne capacity pro- viding a 3” stroke length to crop the section “double shear” thus taking a slug. A lightweight aluminium alloy 4 pillar die-set press which runs on linear slides mounted onto a sturdy fabricated baseframe houses the cropping blade & dies. Controls Controls for the Line are housed in appropriate enclosures, with the main control desk situated at the front of the line. FORMIT RF28 12 Pass Rollformer for the production of Window Profile Reinforcements © FORMIT LTD. UNIT 6 MORGAN HOUSE, FOLKES ROAD, LYE STOURBRIDGE, WEST MIDS, DY9 8RG TEL: +44 (0) 1384 895150 FAX: +44 (0) 1384 895303 EMAIL : [email protected]
Transcript of 12 Pass Rollformer for the production of Window Profile ... · The cut-off shear is positioned by a...
PerformanceLine speed : 50m/minMax component length : 6 metresAccuracy : ± 0.5mm
Coil - Galvanised Mild Steel2000kgs x 300mm x 2mm & 1200mm O/D
NON MOTORISED DECOILERDouble sided Non-Motorised Decoiler withBack Tension and Safety Brakes (2t Capacity).
F1(1.5”) 12 PASS DEDICATED ROLLFORMER12 pass dedicated rollform mill with 1.5” diametershafts. Variable speed A C drive Adjustable upperrolls to set the correct rolling pressure.An adjustable guide assembly with digital readourt ismounted prior to the rollforming head section.The rollformer is guarded by a box type mesh guardwith a hinged door, for access to the rollforming head,the door is interlocked with the emergency stopcircuit.
MEASURING WHEELA measuring wheel is fitted with a length measuringencoder which runs directly on the strip/section.
FLYING SHEAR, BASEFRAME AND TOOLINGThe cut-off shear is positioned by a servo controlsystem which calculates a speed match between thematerial and the shear assembly.The flying shear consists of a High Speed HydraulicBlock Cylinder system with a 20 tonne capacity pro-viding a 3” stroke length to crop the section “doubleshear” thus taking a slug. A lightweight aluminiumalloy 4 pillar die-set press which runs on linear slidesmounted onto a sturdy fabricated baseframe housesthe cropping blade & dies.
ControlsControls for the Line are housed in appropriateenclosures, with the main control desk situated at thefront of the line.
FORMIT RF28
12 Pass Rollformer for the production ofWindow Profile Reinforcements
© FORMIT LTD. UNIT 6 MORGAN HOUSE, FOLKES ROAD, LYE STOURBRIDGE, WEST MIDS, DY9 8RGTEL: +44 (0) 1384 895150 FAX: +44 (0) 1384 895303 EMAIL : [email protected]
