PRE-SORTEDFIRST CLASS MAIL

US POSTAGEPAID

HAVERTOWN, PAPERMIT #45

`12 CAT 329EL `99 GROVE RT750 AND `08 ICE 28B`00 HYDRA PLATFORMS HP-32

ABSOLUTE AUCTION

Williamsport, Pennsylvania

Susquehanna Supply Co., Inc.

THURSDAY, DECEMBER 15, 2016 9:00 A.M.

COMPLETE ASSET LIQUIDATION

1440 COWPATH RD. • HATFIELD, PA 19440215/361-9099 • Fax: 215/361-9212

www.hunyady.com

NEVER A BUYER’S PREMIUM!

PA Auction License No: AY000281 • While information is believed to be accurate, all items will be sold “As-Is, Where-Is” without guarantee or warranty. A physical inspection is suggested.

Notice: Susquehanna Supply Company has been building bridges in Pennsylvania for over (45) years. Mr. Tim Crotty, President, has decided to liquidate all equipment assets at absolute auction. All items in the auction are owned by Susquehanna Supply Co. and will sell to the highest bidder, regardless of price and without minimums, reserves, or a Buyer’s Premium!Auctioneer’s Note: Due to the number of items being sold it will be necessary to have (2) auctioneers selling throughout the day. Please plan accordingly. Contact auction company for details. Location: The auction will be held at the Susquehanna Supply office and yard facility at 2 Rose Street, Williamsport, Pennsylvania 17703Directions: TRAVELING ON US ROUTE 220: Exit #29 (US 15 North/Mansfield) and proceed to the Third Street Exit. At Bottom of ramp turn right onto 3rd Street and continue (0.6) miles and turn right onto Rose Street. Proceed on Rose Street (0.4) miles to sale site.Online Bidding: Live internet bidding will be provided by Proxibid. Proxibid will require a 5% internet provider service fee that will be charged for each item purchased online. All interested internet bidders are required to register with Proxibid 24 hours prior to the auction at www.proxibid.com/hunyady or call 877-505-7770Terms: Payment in full is required on sale day by cash, certified funds, or check with a bank letter of guarantee. Sample letter of guarantee: “We hereby guarantee the payment of our customer ___________ written on his account up to __________ dollars for purchases at your auction sale on December 15, 2016” All guaranteed checks should be made payable to Hunyady Auction Co.Sales Tax: Since this contractor is selling items not normally sold in the course of his business, the Commonwealth of Pennsylvania considers this an isolated sale and does not require the auction company to collect sales tax.Financing: Financing is available, please contact Susan (215) 361-9099 at the auction company for details.Inspection: Items will be available for inspection beginning one week prior to the auction from 8:00AM to 4:00PM, or sale day morning beginning at 7:00AM. The site will be closed Saturday and Sunday, December 10th and 11thRemoval: After complete payment, all sale items may be removed on sale day as long as the removal activity is not disruptive to the sale and only until 5:00PM. Items may also be removed Friday, December 16th and Monday thru Thursday, December 19th to December 22nd from 8:00AM until 4:00PM. All items must be removed no later than Thursday, December 22, 2016 at 4:00PMAirport Information: The area is serviced commercially and privately through Williamsport Regional Airport (KIPT)Motel Information: Fairfield Inn & Suites, 104 Maynard St, Williamsport, PA 17701 (570) 601-9200 • Holiday Inn Express & Suites, 90 Pine St, Williamsport, PA 17701 (570) 327-5292 • The Genetti Hotel & Suites, 200 W 4th St, Williamsport, PA 17701 (570) 326-6600

SALESITE

Susquehanna Supply Co., Inc.

Sale Site Phone: (267) 446-3808 (Beginning 12/5/16) • Sale Site Fax: (888) 859-8958

2 Rose StreetWilliamsport, Pennsylvania 17703

(4) 20,000# Portable Truck Scales • HIGHLAND 1,000 Gallon Double Wall, Skid Mounted Fuel Storage Tank, with Gasboy electric pump and gallon indicator • 500 Gallon Skid Mounted Fuel Storage Tank, with Gasboy electric pump and gallon indicator • 500 Gallon Skid Mounted Fuel Storage Tank,

with manual pump • 300 Gallon Skid Mounted Fuel Storage Tank • 1,600 Gallon Poly Tank • 1,400 Gallon Poly Tank • (9) 500 Gallon Poly Tanks • 100 gallon Cross-Bed Fuel Tank, with electric pump • BLUE FIN 16’ Aluminum Boat • CRESTLINER 16’ Aluminum Boat • MERCURY 9.8HP Outboard Motor • Galvanized Corrugate Plastic Pipe • Small Quantity Plastic Pipe • Small Quantity Corrugated Plastic Pipe • Used Equipment and Truck Tires • New and Used Truck and Machine Parts • (73) Jersey Barriers • (235) Concrete Retaining Blocks: 4’x4’x2’ • Attenuators and Bases • Silt and Safety Fence

ALKOTA 5407 26HP Diesel Powered Steam Cleaner, s/n 265200,4,000PSI, oil fired. Very Good (00,167 Hours) • LANDA Industrial Series Portable Pressure Washer • LANDA SGHW4-2000 Steam Cleaner, Wisconsin 2 cylinder gas • CINCINNATI Drill Press, with 3’ column, 5’ arm, 3-way slotted base, 22”x28” 2-way slotted table, table vise, and 3-phase electric • WILTON 7x12 Horizontal/Vertical Electric Band Saw • BLACK & DECKER Reversing Magnetic Drill Press • PORTO-MAC Magnetic Drill Press • (2) CHAMPION AC50 Magnetic Hole Cutting Systems • (2) SLUGGER Max 2+2 Magnetic Drill Presses • SLUGGER Magnetic Drill Press • HOBART TR-250-HF Portable Electric Welder • HOBART Handler 140 Wire Feed Welder, with cart • (3) HOBART Hefty Wire Feed Welders • (3) PHOENIX Rod Ovens • ETQ 2-Stage Portable Air Compressor, 6.5HP gas • CAMPBELL 8 gallon Portable Air Compressor, Honda 5.5GP gas • NAPA 6/12/24 Bolt Portable Battery Charger/Starter • GRAY QP-100 Pneumatic Filter Crusher • SCHAUER 6/12/24 Volt Portable Battery Charger/Starter • SAFETY-KLEEN Model 30 Electric Parts Washer • SAMSON Pneumatic Luber, with self winding hose reel • DAKE 70H Manual Hydraulic Shop Press • MILWAUKEE 6”/8” Dual Wheel Bench Grinder, with shop made pedestal • 2-Wheel Dolly • Bolt Bins and Parts Cabinets • 12 Gallon Shop Vac • 8 Gallon Shop Vac • CRAFTSMAN 12 Gallon Shop Vac • Hydraulic Transmission Jack • LINCOLN Cordless Grease Gun • SIMPLEX Railroad Jack • Oxygen/Acetylene Torch Set, with cart • GOULDS Ditch Wizard 2” Electric Submersible Pump • MILWAUKEE Circular Saw • MILWAUKEE 12” Electric Chop Saw • (3) MASTER BLP375AT Propane Space Heaters, with thermostats • (6) LB WHITE 400 Plus Electric Space Heaters • BLACK & DECKER Electric Angle Grinder • CP Pneumatic Grinder • MILWAUKEE 4-1/2” Electric Angle Grinder • (2) DEWALT 7” Electric Angle Grinder • DEWALT 1/2” VSR Hammer Drill • MILWAUKEE 1/2” Electric Drill • MILWAUKEE 4-1/2” Electric Angle Grinder • (2) DEWALT 7” Electric Angle Grinder • DEWALT 1/2” VSR Hammer Drill • HILTI TE70-ATC Hammer Drill • MILWAUKEE Sawzall • DEWALT 3/8” Electric Drill • DEWALT 1/2” Electric Impact Wrench • JEM Electric Screw Shooter • MAKITA Reciprocating Saw • MAKITA 7-1/4” Circular Saw • MILWAUKEE 7-1/4” Circular Saw • NIKON AS-2C Automatic Level • FACTORY CUT Model 34 Battery Power Floor Sweeper • (2) 36” Portable Shop Fans • HARRINGTON 3-Ton Chain Hoist • 3-Ton Floor Jack • 6’ Fiberglass Step Ladder • 10’ Fiberglass Step Ladder • Manual Luber • Pneumatic Barrel Pump • Manual Barrel Pump • 12-Ton Bottle Jack • (3) 2-Wheel Dollys • Drum Cart • (2) Oxygen/Acetylene Carts • GRACO Ultimate MXII Portable Electric Paint Sprayer • REED Manual Pipe Threader, with 3/8” to 1” dies • Single Barrel and Double Barrel Sealant Guns • Beam Trolleys • Shop Lights, with stands • (2) Electric Space Heaters • HILTI TE70-ATC Hammer Drill • RIDGID Job Box • Banding Cart, with tools • (2) Fiberglass Step Ladders • (3) Cable Come-A-Longs • Oxygen/Acetylene Hose • (3) Job Boxes • Oxygen/Acetylene Torches and Gauges • 1” Drive Socket Set • 1” Drive Torque Wrench • Impact Sockets • DELTA 33-890 Radial Arm Saw • EMPIRE Super 350 Sandblast Pot • (2) Electric Space Heaters • RIDGID Job Box • Banding Cart, with tools • (4) 24’ Fiberglass Extension Ladders • 28’, 20’, & 16’ Fiberglass Extension Ladders • 4-Wheel Hand Dolly • (4) Jack Stands • (2) Mechanics Creepers • Banding Cart and Tools • Fire Extinguishers

SCALES, TANKS, BOATS, AND MISCELLANEOUS

SHOP TOOLS

FUEL TANK

JERSEY BARRIERS

ALKOTA STEAM CLEANER

(#127) 1973 LINK-BELT Model HC218, 82 Ton Conventional Truck Crane, s/n 18HA-454, powered by Cummins 6 cylinder diesel engine and twin disc torque converter, equipped with 140’ of 60” pin connected tubular boom, 30’ jib, main and auxiliary hoists, front bumper counterweight, 2-piece rear counterweight, mounted on 8x4 carrier, powered by Cummins 6 cylinder diesel engine and 10 speed transmission, equipped with (4) hydraulic extending outriggers and 14.00x24 tires. In good condition with good tires. (Current OSHA Certification) (#179) 1975 LINK-BELT Model HC-138, 65 Ton Conventional Truck Crane, s/n 19G5-583, powered by Detroit 6-71 diesel engine, equipped with 150’ pin-connected tubular boom, 20’ jib, main and auxiliary hoists, 3rd drum, power down on all drums, 2 speed rear drum, 2 speed boom lowering, PAT PRS75E2 LMI system, front bumper counterweight, 2-piece rear counterweight, mounted on 8x4 carrier, s/n 65U298, powered by Detroit 8V-71 diesel engine and 5 speed transmission with 2 speed rear, equipped with (4) hydraulic extending outriggers and 14.00x20 tires. In good condition with good tires. (Current OSHA Certification)

(#268) 1999 GROVE Model RT750, 50 Ton Hydraulic Rough Terrain Crane, s/n 220232, powered by Cummins 6BTA5.9L, 6 cylinder diesel engine and powershift transmission, equipped with 35’ to 110’ 4-section hydraulic boom, 32’ to 56’ telescopic swing away lattice jib, main and auxiliary hoists, PAT DS350 LMI, 4-sheave hook block, (4) hydraulic outriggers, and 29.5x25 tires. In good condition with good tires. (Current OSHA Certification)(#126) 1980 FMC LINK-BELT Model HSP-8020, 20 Ton Hydraulic Rough Terrain Crane, s/n 47H0-1174H, powered by Cummins 6 cylinder diesel engine and powershift transmission, equipped with 25’-60’ 3-section hydraulic boom, 20’ swing away lattice jib, main and auxiliary hoists, Kruger LMI system, 3-sheave hook block, overhaul ball, propane cab heater, (4) hydraulic outriggers, and 20.5x25 tires. In fair to good condition with good tires. (Current OSHA Certification)(#143) 1981 FMC LINK-BELT Model HSP-8018, 18 Ton Hydraulic Rough Terrain Crane, s/n 47H1-1024, powered by Cummins 8 cylinder diesel engine and powershift transmission, equipped with 25’-60’ 3-section hydraulic boom, 20’ swing away lattice jib, main and auxiliary hoists, anti-two block system, 2-sheave hook block, propane cab heater, (4) hydraulic outriggers, and 20.5x25 tires. In fair to good condition with fair to good tires. (Current OSHA Certification)

Hot Rolled: Approximately 421,306# PZ 27 Doubles • Approximately 70,352# PZ 27 Singles • PZ 27 Corners, Triples and Corners Attached to Single SheetsCold Rolled: Approximately 12,128# CZ 128 Doubles • Approximately 445,588# CZ 114 Doubles and Singles

(#293) 2008 ICE Model 28B Hydraulic Vibratory Pile Driver/Extractor, s/n V06343, equipped with model 140C clamp, s/n C09206, 150’ hose bundle, ICE model 350E hydraulic power unit, s/n P05349, powered by Cat C-9 diesel engine. In good to very good condition. (Meter Reads 1,200 Hours) (#263) 1993 MKT Model V5B Hydraulic Vibratory Pile Driver/Extractor, s/n 930501E, equipped with MKT model HP175 hydraulic power unit, s/n 930501P, powered by John Deere 6 cylinder diesel engine. In good condition. (#196) L.B. FOSTER Model 20H4 Hydraulic Vibratory Pile Driver/Extractor, s/n A32441, equipped with L.B. Foster model 20H4PP hydraulic power unit, powered by Cat 3208 diesel engine. In good condition. (#296) 2010 ICE Model I-30V2 Diesel Pile Hammer, s/n ZC20100734A, equipped with 85’ of leads. In good condition. (#258) 1994 DELMAG Model D12-32 Diesel Pile Hammer, s/n 8368, equipped with 85’ of leads and 3’ bottom lead. In good condition.(#192) 1969 DELMAG Model D-12 Diesel Pile Hammer, s/n 7402, equipped with 85’ trapezoidal leads and FEC model 52000H square head. In good condition.(#176) 1964 DELMAG Model D-12 Diesel Pile Hammer, s/n 6895, equipped with stand. In good condition.(#109) 1956 VULCAN Model 400A Pile Extractor, s/n 4050. In good condition • (3) MKT Model 9-B3 Pneumatic Pile Driver. In good condition. (1 For Parts) • (#199) MKT #7 Pneumatic Pile Driver. In good condition • (#129) MKT #6 Pneumatic Pile Driver, s/n 730. In good condition • (#177) Assorted Trapezoidal Leads. In good condition.

(#261) 2000 HYDRA PLATFORMS Model HP-32 Hydraulic Portable Bridge Inspection Platform, s/n 1H9US52637YC196143, powered by 2 cylinder gas engine, equipped with 32’x48” 180° rotating platform, 1,000# capacity, hydraulic travel, 16’ max lowering depth, 1 cylinder gas auxiliary engine, and 225/75R15 tires. In good condition with very good tires.(#148) 1982 BIDWELL Model BR-360 Bridge Deck Finishing Machine, s/n BR361382, Kohler 1 cylinder gas engine powered, 36” single roll finisher equipped with (3) 12’, (3) 6’, and (1) 3’ inserts, work bridge consisting of (7) 15’, (9) 10’, (1) 7’, (1) 4’, and (5) 3’ sections, rail and accessories. In good condition.

22,660 ft2 Under Bridge Protection System, 412’x55’w (See Link On Website for Detailed Description)

ROUGH TERRAIN CRANES

CONVENTIONAL TRUCK CRANES

950,000# HOT AND COLD ROLLED Z-PILING

PILE DRIVING EQUIPMENT

PORTABLE BRIDGE INSPECTION PLATFORM, BRIDGE DECK FINISHER AND UNDER BRIDGE PROTECTION SYSTEM

`99 GROVE RT750, 50 TON

`73 LINK-BELT HC218, 82 TON

`08 ICE 28B WITH 350E POWER UNIT

`00 HYDRA PLATFORMS HP-32

DIESEL PILE HAMMERS

UNDER BRIDGE PROTECTION SYSTEM

`81 LINK-BELT HSP-8018, 18 TON

`80 LINK-BELT HSP-8020, 20 TON

`75 LINK-BELT HC-138, 65 TON

LARGE Quantity of Bridge Beams (Up To 106.5’), Decking, Structural Steel and Pipe

STRUCTURAL STEEL AND PIPE(Detailed Description on Website)

BEAMS BEAMS

`93 MKT V5B WITH HP175 POWER UNIT

`82 BIDWELL BR-360

ABSOLUTE AUCTION

COMPLETE ASSET LIQUIDATION

(Please Refer To List on Website for Detailed Inventory)

JRB 60” Fork Attachment (Komatsu WA250)

(#130) 1984 CATERPILLAR Model 936 Rubber Tired Loader, s/n 33Z00979, powered by Cat 3304 diesel engine and powershift transmission, equipped with general purpose loader bucket with bolt-on cutting edge, enclosed ROPS cab with heat and air conditioning, and 17.5x25 tires. In good condition with good tires.

(#276) 2004 KOMATSU Model WA250-5L Rubber Tired Loader, s/n A73417, powered by Komatsu SAA6D102E-2 diesel engine and powershift transmission with variable shift control, equipped with JRB general purpose loader bucket with bolt-on cutting edge, JRB hydraulic coupler, enclosed ROPS cab with heat and air conditioning, and 20.5R25 tires. In good condition with fair to good tires. (Meter Reads 4,141 Hours)

EFCO 360° Column Forms: (36) 36” to 96” Diameter (Detailed Description on Website)

Approximately 12,000 ft2 of EFCO 8”, 6”, and 4” rib plate girder forms (Detailed Description on Website)

Flex Forms • (650’+/-) BMF Parapet Forms Including: (26) 33”x10’, (12) 33”x8’, (2) 33”x2’, (36) 43”x8’, (2) 43”x2’, (4) 33” to 43” transitions • (750) Overhand Brackets • (1,950 +/- ft2) EFCO Hand Set, Steel Faced Forms • UNIVERSAL Forms • SYMONS Forms • Wooden Forms • LARGE Quantity of Form Hardware

RUBBER TIRED LOADERS

COLUMN AND PLATE GIRDER FORMS, OVERHANG BRACKETS, ETC.

`04 KOMATSU WA250-5L

EFCO COLUMN FORMS

OVERHANG BRACKETS

EFCO COLUMN FORMS EFCO GIRDER FORMS

PARAPET FORMS

`84 CAT 936

EFCO GIRDER FORMS

UNIVERSAL FORMS

THURSDAY, DECEMBER 15, 2016 – 9:00 A.M.

WILLIAMSPORT, PENNSYLVANIA

(#299) 2013 CATERPILLAR Model 308E2 CR Midi Hydraulic Excavator, s/n TMX00342, powered by Cat C3.3B diesel engine and hydraulic drive, equipped with 82” dipper stick, Cat 36” digging bucket, 92” backfill blade, auxiliary hydraulics, enclosed ROPS cab with heat and air conditioning, heated seat, and 18” TBG pads with bolt-on street pads. In good condition with good undercarriage. (Meter Reads 1,269 Hours)

(#277) 2006 CATERPILLAR Model 303CR Mini Hydraulic Excavator, s/n DMA04202, powered by Cat 3 cylinder diesel engine and hydraulic drive, equipped with 60” dipper stick, Cat 24” digging bucket, auxiliary hydraulics, manual coupler, enclosed ROPS cab, and 12” rubber crawlers. In good condition with good undercarriage.

(#125) 1996 GRADALL Model XL4100 Rubber Tired Excavator, s/n 0417242, powered by Cummins 5.9L diesel engine, equipped with 64” cleanup bucket, remote travel, mounted on Gradall GW-594-41 6x4 carrier, s/n G04335, powered by Cummins 6CT8.3 diesel engine and Fuller RTO6613, 15 speed transmission, equipped with 10.00x20 tires. In good condition with good tires.

Cat Hydraulic Demolition Hammer (Cat 303CR) • NPK 16X Hydraulic Demo Hammer, with Kenco adaptor and pin adaptor (Cat 325 or Cat 329) • NPK Charging System • KENCO 42” Slab Bucket, with Kenco adaptor (Cat 325 or Cat 329) • KENCO 36” Slab Bucket, with pin connection (Cat 325 or Cat 329) • LABOUNTY HDR120 5-Tine Grapple, s/n 2730 (Cat 325) • Frost Tooth Attachment (Cat 235) • Frost Tooth Attachment (Cat 225) • CAT 52” Digging Bucket (Cat 325) • 40” Digging Bucket (Cat 235) • 36” Digging Bucket (Cat 225) • 28” Digging Bucket (Cat 225) • 24” Digging Bucket (Cat 225) • 40” Digging Bucket (cracked edge) (Cat 225) • 24” Digging Bucket (Gradall XL4100) • 14” Digging Bucket (Gradall XL4100)

HYDRAULIC EXCAVATOR, UNIVERSAL PROCESSOR, HAMMERS AND ATTACHMENTS

`12 CAT 329EL `13 CAT 308E2 CR

`06 CAT 303CR (HAMMER SOLD SEPARATELY)

`96 GRADALL XL4100

`95 CAT 325L

`04 CAT 322CL

(#300) 2012 CATERPILLAR Model 329EL Hydraulic Excavator, s/n PLW00471, powered by Cat C7.1 diesel engine and hydraulic drive, equipped with 10’6” dipper stick, Kenco 48” digging bucket, auxiliary hydraulics, enclosed ROPS cab with heat and air conditioning, and 31.5 TBG pads. In good condition with good undercarriage. (Meter Reads 3,305 Hours)

(#295) 2004 CATERPILLAR Model 322CL Long Reach Hydraulic Excavator, s/n HEK00624, powered by Cat 3126, 309HP diesel engine and hydraulic drive, equipped with approximately 25’9” dipper stick, Cat 36” digging bucket, enclosed ROPS cab with heat and air conditioning, and 31.5” TBG pads. In good condition with good undercarriage. (#200) 1995 CATERPILLAR Model

325L Hydraulic Excavator, s/n 7LM00547, powered by Cat 3116 diesel engine and hydraulic drive, equipped with 10’6” dipper stick, 54” digging bucket, NPK hydraulic controls, auxiliary hydraulics, enclosed ROPS cab with heat and air conditioning, and 32” TBG pads. In good condition with good undercarriage.

(#142) 1986 CATERPILLAR Model 235B Hydraulic Excavator, s/n 9PC00368, powered by Cat 3306DI diesel engine and hydraulic drive, equipped with 9’6” dipper stick, 52” digging bucket, 16’5” crawlers, and 36” TBG pads. In fair to good condition with good undercarriage. (New Travel Motors, Boom Cylinders, & Swivel – Approx. 1,000 Hours) (Will Be Offered Separately and with LaBounty UP90R)(#197) 1991 LABOUNTY Model UP90R Hydraulic Universal Processor, s/n UP9015,

equipped with 32” shear, 36” concrete pulverizer jaws with stand, hydraulic rotating head, and transport wagon. In good condition. (Will Be Offered Separately and With Cat 235B)

`86 CAT 235B AND `91 LABOUNTY UP90R OFFERED SEPARATELY AND TOGETHER

(#264) 1998 JCB Model 532, 7,000# 4x4 Rough Terrain Forklift, s/n 0771240, powered by Perkins 4 cylinder diesel engine and powershift transmission, equipped with 3-secton hydraulic boom, 48” forks, general purpose loader bucket, auxiliary hydraulics, 40’ fork height, enclosed ROPS cab, and 15.5x25 tires. In good condition with good tires. (#141) 1983 CATERPILLAR Model V140, 14,000# Pneumatic Tired Forklift, s/n 13V983, powered by 4 cylinder diesel engine and shuttle transmission, equipped with 146” 2-stage mast, side shift, 72” forks, ROPS canopy, and 8.25x15 tires. In good condition with poor tires.(#106) 1977 CATERPILLAR Model V60B, 6,000# Solid Tired Forklift, s/n 58W1615, powered by Perkins 4 cylinder diesel engine and hydrostatic transmission, equipped with 12’ 2-stage mast, 48” forks, operator protection, and 2.50x15 front and 6.50x10 rear tires. In fair to good condition with fair tires.

ABSOLUTE AUCTION

COMPLETE ASSET LIQUIDATION

(#280) 2006 STONE Model SD54 Vibratory Compactor, s/n 092006212, powered by John Deere 2.9L diesel engine and hydrostatic transmission, equipped with 54” smooth drum, drum drive, drum cleaner, and 9x16 tires. In good condition with good tires.

(#191) 1987 CATERPILLAR Model CP323 Vibratory Compactor, s/n 6JD00146, powered by Perkins 4 cylinder diesel engine and hydrostatic transmission, equipped with 48” padfoot drum, 64” grading blade, drum drive, drum cleaner, ROPS canopy, and 9.5x24 tires. In good condition with fair to good tires.

(#161) 1974 HYSTER Model C350B-D Tandem Roller, s/n B89C-6653-U, powered by Detroit 3-53 diesel engine and hydrostatic transmission, equipped with 54” split front and smooth rear drums, and water system. In fair to poor condition. (#164) EUCLID Soil Compactor, s/n unknown, powered by Cummins 6 cylinder diesel engine and 5 speed transmission, equipped with 60”x42” rear compaction wheels and 12.00x24 tires. In fair to poor condition with fair tires.(#194) 1992 STONE Model RD33 Trench Compactor, s/n 3711198, powered by Wisconsin 2 cylinder gas engine and hydrostatic transmission, equipped with 16” padfoot front drum and (2) 12” rear drums. In good condition.1999 BOMAG Model BW60 SEI Trench Compactor, s/n 57391, powered by Hatz diesel engine and equipped with 24” smooth drums. In fair to good condition.72” Tow Behind Sheepsfoot Compactor

COMPACTORS AND ROLLERS

`06 STONE SD54

`87 CAT CP323

(#290) 1999 JLG Model 80HX+6, 80’ 4x4 Aerial Lift, s/n 0959310300042830, powered by Deutz 4 cylinder diesel engine and hydraulic drive motors, equipped with 36”x72” 500# capacity man/material basket, extendable axles, basket leveling and rotation, 3-section hydraulic boom with 6’ extension, house leveling, 150 volt generator, and 15x19.5 tires. In good condition with fair to good tires. (#257) 1995 GROVE Model MZ66B, 60’ 4x4 Aerial Lift, s/n 34398, powered by 4 cylinder dual fuel and hydraulic drive, equipped with 500# capacity 35”x96”man/material basket, 3-section hydraulic boom, and 15x19.5 tires. In good condition with good tires. (#281) 2000 JLG Model 40H, 40’ 4x4 Self Propelled Aerial Lift, s/n 0300049140, powered by 4 cylinder dual fuel engine and hydraulic drive motors, equipped with 40’ max platform height, 33’ horizontal reach, 36”x96” 500# capacity man/material basket, basket rotation, house leveling, and 12.5Lx15SL tires. In good condition with good tires.

AERIAL LIFTS

`99 JLG 80HX+6, 80’

`00 JLG 40H, 40’

(#294) 2007 CATERPILLAR Model TL1055, 10,000# 4x4 Rough Terrain Telescopic Forklift, s/n TBM00206, powered by Cat 4 cylinder diesel engine and powershift transmission, equipped with 4-section hydraulic boom, 55’ fork height, 60” forks, auxiliary hydraulics, enclosed ROPS cab with heat, (2) hydraulic outriggers, and 14.00x24 tires. In good condition with fair tires.

(#286) 2008 JLG Model G9-43A, 9,000# 4x4 Rough Terrain Telescopic Forklift, s/n 0160035057, powered by John Deere 4 cylinder diesel engine and powershift transmission, equipped with 3-section hydraulic boom, 48” fork attachment, 43’ fork height, auxiliary hydraulics, semi enclosed ROPS cab, and 13.00x24 tires. In good to very good condition with good to very good tires.

FORKLIFTS

`07 CAT TL1055, 10,000#

`98 JCB 532, 7,000#

`08 JLG G9-43A, 9,000#

(#157) 1982 CATERPILLAR Model 963 Crawler Loader, s/n 06Z01018, powered by Cat 3304 diesel engine and hydrostatic transmission, equipped with general purpose loader bucket with teeth, ROPS canopy, and 18” DBG pads. In fair condition with fair to good undercarriage.

(#175) 1979 CATERPILLAR Model D3 Crawler Tractor, s/n 79U5806, powered by Cat 3204 diesel engine and powershift transmission, equipped with 6-way blade, tow pin, ROPS over enclosed cab, and 14” SBG pads. In good condition with fair to good undercarriage.

(#289) 2007 CATERPILLAR Model 420EIT, 4x4 Tractor Loader Extend-A-Hoe, s/n G4D17042, powered by Cat 4 cylinder diesel engine and powershift transmission, equipped with general purpose loader bucket with bolt-on cutting edge, Cat 24” digging bucket, front and rear auxiliary hydraulics, coupler, ride control, enclosed ROPS cab with heat and air conditioning. In good condition with good tires.

(#189) 1989 CATERPILLAR Model 416 Tractor Loader Backhoe, s/n 5PC08889, powered by Perkins 4 cylinder diesel engine and shuttle transmission, equipped with general purpose loader bucket with bolt-on cutting edge, 24” digging bucket, ROPS canopy, light package, and 11Lx16 front and 16.9x24 rear tires. In fair condition with good tires.

12” Digging Bucket (Cat 416)

(#279) 2006 ASV Model RC-60 Posi-Track Crawler Skid Steer Loader, s/n RSE01592, powered by Perkins 4 cylinder diesel engine and hydrostatic transmission, equipped with 64” general purpose loader bucket with bolt-on cutting edge, auxiliary hydraulics, manual coupler, ROPS canopy, and 14” rubber tracks. In good condition with good tracks.

CRAWLER LOADER

CRAWLER TRACTOR

BACKHOES AND SKID STEER LOADER

`82 CAT 963

`79 CAT D3

`07 CAT 420EIT 4X4 EXTEND-A-HOE

`06 ASV RC-60

`89 CAT 416

(#237) 1987 TRANSPORT Model HRTY-T-1-50DHAT, 50 Ton Tri-Axle Lowboy Trailer, equipped with non-ground bearing detachable gooseneck, 48” flip-up air ride 3rd axle, 22’6” level deck, 7’8” over tandems, 2’ transition ramp, 8’6” width, beam suspension, tie downs, outriggers, and 255/70R22.5 tires. In good condition with good tires.(#205) 1971 ROGERS Model T3HPG50-35DSF, 50 Ton Tandem Axle Lowboy Trailer, equipped with ground bearing detachable gooseneck, gas powered pony motor, wetline, 20’ level deck, 6’9” over tandems, 30” transition ramp, flip axle brackets, outriggers, tie downs, and 10.00R15 tires. In good condition with good tires.(#242) 2000 Model XL80SD Spread Axle Step Deck Trailer, equipped with 60,000# in 10’ concentrated load rating, 10’ upper deck, 24” step, 39’9” lower deck, 10’ axle spacing, 97” deck width, 101” overall width, air ride suspension, stake pockets, 92,190# GVWR, ratchet straps, chain dogs, and 235/75R17.5 tires. In good condition with good to very good tires.(#228) 1985 DORSEY Model DDGT Tandem Axle Step Deck Trailer, equipped with 55,000# payload rating, 11’ upper deck, 20” step, 34’ lower deck, 97.5” deck width, 102” overall width, spring suspension, 70,760# GVWR, stake pockets, ratchet straps, and 10.00R15 tires. In good condition with very good tires.(#226) DORSEY 40’-70’ Tandem Axle Extendable Flatbed Trailer, equipped with 44,000# GVWR, stake pockets, and 11R22.5 tires. In good condition with good tires. (No VIN Plate) (#232) 1974 GREAT DANE 45’ Tandem Axle Flatbed Trailer, equipped with 65,000# GVWR, steel deck with stake pockets, sliding tandems, and 11R22.5 tires. In fair condition with good tires. (#231) DORSEY 40’ Tandem Axle Flatbed Trailer, equipped with spring suspension, sliding tandems, steel deck, 60,000# GVWR, 92” deck width, 96” overall width, and 10.00x22 tires. In good condition with fair to good tires. (No VIN# Plate) (#246) 1970 HERCULES 40’ Tandem Axle Flatbed Trailer, equipped with 65,000# GVWR, 90” deck width, 96” overall width, sliding tandems, fixed headboard, stake pockets, ratchet straps, and 11R22.5 tires. In good condition with fair tires. (New Deck)(#214) HILL 40’ Tandem Axle Flatbed Trailer, equipped with spring suspension and 10.00x20 tires. In fair condition with good tires. (No VIN# Plate) (#230) 1962 FRUEHAUF Model PA-S2-36, 36’ Tandem Axle Flatbed Trailer, equipped with steel flatbed, 12” I-beam sides, fixed headboard, stake pockets, and 10.00x22 tires. In fair condition with fair tires.

THURSDAY, DECEMBER 15, 2016 – 9:00 A.M.

WILLIAMSPORT, PENNSYLVANIA

(#089) 1988 AUTOCAR/VOLVO WHITE Tri-Axle Truck Tractor, powered by Cat 3406 diesel engine and Fuller 8LL, 10 speed transmission, equipped with 46,320# rears and 12,860# front axle, wetline, spring/beam suspension, air slide 5th wheel, double frame, 2-stage Jake brake, diff lock, 213” wheelbase, 59,180# GVWR, heated mirrors, air conditioning, and 11R24.5 tires. In very good condition with very good tires. (Odometer Reads 230,842 Miles) (#052) 1985 MACK Model RD686S Tandem Axle Truck Tractor, powered by Mack EM6-285 diesel engine and 6 speed lo hole transmission, equipped with 44,000# rears, camel back suspension, double frame, 174” wheelbase, 2-stage engine brake, wetline, air slide 5th wheel, and 365/80R20 front and 11R24.5 rear tires. In good condition with good tires. (#077) 1982 MACK Model R688ST Tandem Axle Truck Tractor, powered by Mack 6 cylinder diesel engine and 10 speed transmission, equipped with 34,000# rear and 12,000# front axle, wetline, airslide 5th wheel, camelback suspension, 172” wheel base, and 11R22.5 tires. In good condition with good tires.(#043) 1982 MACK Model RD686S Tandem Axle Truck Tractor, powered by Mack EM6-285 diesel engine and 6 speed lo hole transmission, equipped with 44,000# rears, camelback suspension, double frame, 174” wheelbase, double frame, Dynatard engine brake, wetline, air slide 5th wheel, and 315/80R22.5 front and 11R22.5 rear tires. In good condition with good tires. (#245) 1988 TRANSPORT TRAILER Model GQRY-T1-50DPH, 50 Ton Quad Axle Lowboy Trailer, equipped with non ground bearing detachable gooseneck, wetline, gas pony motor, air ride suspension, 25’ drop side deck, 18’ over axles, 123,900# GVWR, outriggers, chain dogs, and 255/70R22.5 tires. In good condition with good tires.

(#137) 1986 MORBARK Model Eager Beaver 12” Portable Chipper, s/n 2427R, powered by Cummins 4B3.9 diesel engine, equipped with 12” feed drums, rotating discharge chute, trailer mounted with 7.00x15 tires. In fair condition with fair tires.(#102) SCHRAMM Pneumatractor, s/n 505S-701, powered by 3 cylinder gas engine and 4 speed transmission, equipped with 7’ hydraulic broom and 7.50x16 front and 11.2x24 rear tires. In fair to good condition with good tires.

(#086) 1994 SIMON/R.O. Model TC-2863, 28,800# Hydraulic Crane, s/n 4590594837, equipped with 25’-63’ 3-section hydraulic boom, Johnson 10 ton single sheave hook block, dual controls, mounted on 1994 Ford Model L8000 Tandem Axle Flatbed Truck, powered by Cummins 8.3L diesel engine and Fuller 10 speed transmission, equipped with 18’ wood stakebed, (4) hydraulic outriggers, and 385/65R22.5 front and 11R22.5 rear tires. In good condition with good tires. (Current OSHA Certification)(#063) 1983 MACK Model MS200P Cabover Single Axle Lube Truck, powered by 6 cylinder diesel engine and 5 speed transmission, equipped with 17’ aluminum van body with roll-up rear and curb side doors, approx. 200 gallon fuel tank, (4) approx. 200 gallon and (1) approx. 150 gallon product tanks, (2) Graco pneumatic pumps, (3) Lincoln Powermaster II pneumatic pumps, lube drum with Lincoln Powermaster II pneumatic pump, 2-stage air compressor with Wisconsin 1 cylinder gas engine, (6) product reels, fuel and hose reels, 25,000# GVWR, and 11R22.5 tires. In fair condition with good tires.

(#069) 1979 MACK Model DM686S Tri-Axle Dump Truck, powered by Mack 6 cylinder diesel engine and 6 speed lo-hole transmission, equipped with 17’ steel dump body, camelback suspension, air conditioning, 315/80R22.5 front, 14/80R20 lift, and 11R24.5 rear tires. In good condition with good tires.

(#070) 1979 MACK Model DM686S Tri-Axle Dump Truck, powered by Mack T676 diesel engine and 6 speed lo hole transmission, equipped with R&S 17’ steel dump body, camelback suspension, and 315/80R22.5 front and 3rd axle and 11R24.5 rear tires. In good condition with good tires. (#029) 1972 MACK Model DM685S Tandem Axle Dump

Truck, powered by Mack 6 cylinder diesel engine and 6 speed lo hole transmission, equipped with 16’ steel dump body with electric tarp kit, beam suspension, and 315/80R22.5 front and 11R22.5 rear tires. In fair condition with good tires. (#030) 1972 MACK Model DM685S Tandem Axle Dump Truck, powered by Mack 6 cylinder diesel engine and 6 speed lo hole transmission, equipped with 16’ steel dump body, beam suspension, and 315/80R22.5 front and 11R22.5 rear tires. In fair condition with good tires.

(#187) 1990 INGERSOLL-RAND Model LM100A Pneumatic Track Drill, s/n BI6860052, equipped with 15’ mast and 8” SBG pads. In good condition with good undercarriage.

(#183) 1957 INGERSOLL-RAND Model CM-2 Pneumatic Track Drill, s/n 16301, equipped with 15’ mast and 10” SBG pads. In fair to good condition.

TRUCK TRACTORS AND TRAILERS

PORTABLE CHIPPER AND TRACTOR

BOOM AND LUBE TRUCK DUMP TRUCKS

TRACK DRILLS

`88 AUTOCAR WITH `87 TRANSPORT 50 TON

`82 MACK R688ST WITH DORSEY 40’-70’

`00 XL80SD

`94 SIMON-RO 28,800# `79 MACK DM686S

`79 MACK DM686S

`82 MACK RD686S WITH `71 ROGERS 50 TON

`88 TRANSPORT TRAILER 50 TON

`85 MACK RD686S WITH `85 DORSEY DDGT

ABSOLUTE AUCTION

COMPLETE ASSET LIQUIDATION

(#091) 1999 GMC Model C6500 Single Axle Flatbed Dump Truck, powered by Cat 3126 diesel engine and 6 speed transmission, equipped with 16’ steel flatbed dump body, spring suspension, air conditioning, and 11R22.5 tires. In good condition with good to very good tires.

(#058) 1982 MACK Model MS200P Single Axle Cabover Flatbed Truck, powered by 6 cylinder diesel engine and 5 speed transmission, equipped with 18’6” steel stakebed with stake pockets and 11R22.5 tires. In fair condition with good tires.(#067) 1982 MACK Model MS200P Single Axle Cabover Flatbed Truck, powered by 6 cylinder

diesel engine and 5 speed transmission, equipped with 22’ steel flatbed and 10.00x20 tires. In fair to good condition with fair to good tires. (#071) 1982 FORD Model 8000 Single Axle Flatbed Truck, powered by Cat 3208 diesel engine and automatic transmission, equipped with 18’ steel flatbed with stake pockets and ratchet straps, spring suspension, pintle hitch with electric, and 11.00R20 tires. In good condition with good tires. (#039) 1977 FORD Model 8000 Tandem Axle Flatbed Truck, powered by Cat 3208 diesel engine and 10 speed transmission, equipped with 22’ steel flatbed, airlift 3rd axle, and 11R22.5 front and 10.00x20 rear tires. In fair to good condition with good to very good tires. (#076) 1976 MACK Model R685ST Tandem Axle Flatbed Truck, powered by Mack ENDT675 diesel engine and 5 speed transmission, equipped with 24’ flatbed, underbed toolboxes, camelback suspension, and 11.00R20 tires. In good condition with good tires.

(#302) 2012 WACKER NEUSON Model G100 Portable Generator, s/n 20135112, powered by John Deere 4045HF285H.1, 4.5L diesel engine, equipped with 80KW/100KVA, 240/480 volt, 240/120 amp, 3-phase, prime, and 7.50x16 tires. In very good condition with very good tires. (#262) 1999 WACKER Model G85 Portable Generator, s/n 5112717, powered by John Deere 4 cylinder diesel engine, rated at 66KW, 83KVA, 208/480-volt, 229/99 amp, 3 phase, equipped with 350 amp and 220 amp circuit breakers, mounted on 1999 Wacker model MGT2E single axle trailer, equipped with 225/75R15 tires. In good condition with good to very good tires. KOHLER Model 85R08489105A Skid Mounted Generator, s/n 315182, powered by 6 cylinder diesel engine, equipped with 75KW/93.75KVA/260 amp continuous, 85KW/106.25KVA/295 amp standby, 3-phase, 120/208 volt. In good condition. WACKER Model G5.6 Generator, s/n Unknown, powered by Honda GX340, 11HP gas engine. In good condition.

FLYGHT 12” Electric Submersible Trash Pump, 460 volt electric and starter boxFLYGHT 12” Electric Submersible Centrifugal Pump, 460 volt/77HP electric and starter boxFLYGHT 8” Electric Submersible Trash Pump, 460 volt electric and starter box(2) FLYGHT 8” Electric Submersible Centrifugal Pumps, 460 volt electric and starter boxFLYGHT 6” Electric Submersible Trash Pump, 460 volt electric and starter box(2) FLYGHT 4” Electric Submersible Submersible Pumps, 460 volt electric and starter box(2) FLYGHT 4” Electric Submersible Pumps, 230 volt electric and (1) with starter box3” Electric Submersible Pump, 460 volt electric and starter box(#165) JAEGER Model 6P, 6” Portable Centrifugal Pump, s/n 2223685, powered by Detroit 3-53 diesel engine, trailer mounted with 6.40x15 tires. In fair to good condition with good tires. (3) JAEGER Model 4PTO, 4” Portable Centrifugal Pump, powered by Allis Chalmers 4 cylinder gas engine, trailer mounted with 6.40x15 tires. In fair to good condition with good tires.

(#229) 60’ Tri-Axle Office Trailer, equipped with (30 offices, (3) window air conditioning units, (4) man doors, electric baseboard heat, and 8x14.5 tires. In good condition with good tires.(#236) WILLIAMS 10’x55’ Tandem Axle Office Trailer, equipped with (3) offices, lavatory, (3) window air conditioning units, electric baseboard heat, (2) man doors, and 7x14.5 tires. In good condition with good tires.(#244) 12’x46’ Tandem Axle Office Trailer, equipped with (3) offices, (2) man doors, lavatory, heat, air conditioning, and 8x14.5 tires. In good condition with good tires.(8) 8’x12’ Single Axle and Tandem Axle 20’ to 45’ Office Trailers, in varying conditions.(#233) 1964 BUTLER 8,300 Gallon Tandem Axle Aluminum Tank Trailer, VIN# 3128NAM, equipped with gravity load and discharge and 10.00x20 tires. In fair condition with poor tires.(10) 27’ to 40’ Single Axle and Tandem Axle Van Storage Trailers. In fair condition • (2) 40’ Overseas Storage Containers • (3) 20’ Overseas Storage Containers • 18’ Van Body • 26’ Van Body

(#275) 2004 INGERSOLL RAND Model P185WJD, 185CFM Portable Air Compressor, s/n 345574UD0221, powered by John Deere 4 cylinder diesel engine, equipped with 205/75D15 tires. In good condition with good tires. (#154) 1996 INGERSOLL-RAND Model XP750WCU, 750 CFM Portable Air Compressor, s/n 267616UGG710, powered by Cummins 6CTA8.3C diesel engine, trailer mounted with 8.00x15.5 tires. In fair to good condition with good tires. (#180) 1984 INGERSOLL-RAND Model P-750-W-CU, 750 CFM Portable Air Compressor, s/n 143361U84482, powered by Cummins L-10 diesel engine, sound suppression, trailer mounted with 8.75x16.5 tires. In fair to good condition with good tires. (#119) 1974 GARDNER DENVER Model SPKDB, 325 CFM Portable Air Compressor, s/n 639417, powered by Detroit 4-53 diesel engine, trailer mounted with 7.00x15 tires. In fair condition with good tires. (#120) 1974 GARDNER DENVER Model SPKDB, 325 CFM Portable Air Compressor, s/n 643480, powered by Detroit 4-53 diesel engine, trailer mounted with 7.00x15 tires. In fair condition with fair tires.

(#087) 2007 GMC Model 3500 Utility Truck, powered by Duramax 6.5L diesel engine and automatic transmission, equipped with 9’ open utility body, tow package, dual fuel tanks, power windows, locks, and mirrors, cruise control, air conditioning, and 215/85R16 tires. In good condition with good tires.

(#260) 2001 FORD Model F-350XL Super Duty Utility Truck, powered by 6.8L, V-10 gas engine and automatic transmission, equipped with 9’ open utility body, dual rear wheels, cruise control, air conditioning, and 235/85R16 tires. In good condition with good tires. (#057) 2000 GMC Model 2500SL Utility Truck,

powered by Vortec 5.7L gas engine and 5 speed transmission, equipped with 8’6” open utility body, material rack, cruise control, air conditioning, and 245/75R16 tires. In fair to good condition with good tires. (Not Running)(#083) 2000 FORD Model F-250XL Super Duty Utility Truck, powered by Powerstroke 7.3L diesel engine and 6 speed transmission, equipped with 8’ open top utility body, 100 gallon fuel tank with electric pump, air conditioning, and 265/75R16 tires. In fair condition with good tires.(#090) 2005 GMC Single Axle Van Body Truck, powered by Vortec 6.0L gas engine and automatic transmission, equipped with 16’ FRP van body with rollup rear door, pullout ramp, tow package, air conditioning, and 225/75R16 tires. In good condition with good tires.

FLATBED TRUCKS

GENERATORS

SUBMERSIBLE AND CENTRIFUGAL PUMPS

OFFICE, TANK, AND VAN/STORAGE TRAILERS

AIR COMPRESSORS

UTILITY AND VAN BODY TRUCKS

`99 GMC C6500

`12 WACKER NEUSON G100

SUBMERSIBLE PUMPS

`99 WACKER G85

SUBMERSIBLE PUMPS

`77 FORD 8000

`04 IR 185CFM

`05 GMC VAN BODY

(1) OF (3) `82 MACK MS200P

`01 FORD F-350XL

THURSDAY, DECEMBER 15, 2016 – 9:00 A.M.

WILLIAMSPORT, PENNSYLVANIA

(#271) 1999 WACKER Model LT4 Portable Light Plant, s/n 5038865, powered by Isuzu 3 cylinder diesel engine, equipped with Pancake 6KW generator, (4) lights, manual raise, (4) manual stabilizers, and 205/75R15 tires. In good condition with good tires. (#270) 1999 WACKER Model LT4 Portable Light Plant, s/n 763501792, powered by Isuzu 3 cylinder diesel engine, equipped with Pancake 6KW generator, (4) lights, manual raise, (4) manual stabilizers, and 205/75R15 tires. In good condition with good tires. (#158) 1994 ALLMAND Model ML4HA0MRXV Portable Light Plant, s/n 940512, powered by Lister 3 cylinder diesel engine, equipped with (4) lights, 6KVA generator, manual raise, and 235/75R15 tires. In fair condition with good tires.

(#195) THRIFT-LIFTY 12”x24’ Portable Electric Conveyor, s/n unknown, equipped with 110 volt electric, wired remote control and 7.00x13 tires. In good condition with good tires.

(6) ENERPAC 100-Ton Rams • ENERPAC 20-Ton Ram • (6) ENERPAC PH80 Porta Powers • ENERPAC P392 Porta Power • JOHNSON 5-Sheave Hook Block • (2) JOHNSON 22 Ton Single Sheave Hook Blocks • Demolition Ball • 3-Sheave Hook Block • Ball Hook • CLAMP-CO 15-Ton Beam Clamp • RIG-MASTER F-15 Beam Clamp • 35-Ton Beam Clamp, 16” to 36” • 30’, 80 Ton SWL Spreader Beam • (4) RENFRO 8 Ton, 2” Plate Lifting Clamps • (2) Heavy Duty Plate Lifting Clamps • (3) KENCO Barrier Lifters • Lifting Cables and Slings • Wire Rope

HILTI DD250E Core Drill, with stand • (13) Core Drill Bits • STIHL TS410 Gas Demo Saw • STIHL TS410 Gas Powered Demo Saw • STIHL TS400 Gas Powered Demo Saw • PARTENER 14” Hydraulic Demo Saw • JONSERED 2171 Gas Powered Chain Saw • JONSERED CS2172 Gas Powered Chain Saw • ECHO CS352 Gas Powered Chain Saw • (2) WACKER PG-2 Centrifugal Pumps, Honda 4HP gas • UNUSED 2” Gas Powered Centrifugal Pump • (2) WAYNE 4E180, 3-Phase, 14KW Generators, Honda GX270 gas • (3) LOADMATIC 5000 Watt Gas Generator • TQ DG6LE Portable Diesel Generator • (31 Sections) BIL JAX Scaffolding, with cross braces and (3) stairways • (6) BIL JAX 7’x28” Aluminum Frame Scaffold Planks • BIL JAX Rolling Scaffold • (5) 8’ Aluminum Scaffold Planks • TORO 20” Walk Behind Snow Blower • GANDY 36” Walk Behind Seed Spreader • MIGHTY MAC Walk Behind Blower, Briggs & Stratton 8HP gas • (2 Sections) Aluminum Trench Shore, with manual pump • REMINGTON 496 Powder Actuated tool • RAMSET SA250 Powder Actuated tool • Self Retracting Laynard • HILTI DD100 Hammer Drill • UNUSED TEXAS PNEUMATIC Needle Scaler, with vacuum attachment • Pneumatic Chipping Hammer • (3) INGERSOLL RAND Max 60 Pneumatic Paving Breakers • (2) THOR 30# Pneumatic Paving Breakers • (4) Pneumatic Rock Drills • (9) Pneumatic Chipping Hammers • LARGE QUANTITY Breaker and Drill Steel • Breaker Stand • WACKER Model G3.7 Generator, powered by Honda 8HP gas engine • (5) Kerosene Space Heaters • WACKER Model WP1540 Walk Behind Plate Compactor, powered by Wacker 6HP gas engine • Signs and Sign Stands 24’ fiberglass Extension Ladder • 8’ Fiberglass Step Ladder • (2) Job Boxes • (9) Wheelbarrows • Contractor Kits

(#131) MILLER Big Blue 400D, 400 Amp Skid Mounted Welder Generator, s/n Unknown, powered by Deutz F3L912 diesel engine. In good condition. (#132) MILLER Bobcat Model 225NT Welder Generator, s/n KJ26470, powered by Onan Performer 16 gas engine (#138) LINCOLN Model SA-200F-163, 200 amp Skid Mounted Welder, s/n A-1062707, powered by 4 cylinder gas engine. In good condition. (#298) RED-D-ARC Model D300K, 3+3 DC Welding Power Source, s/n C1020300061, powered by 4 cylinder diesel engine (#100) HOBART Model Champion 18 Welder/Generator, s/n 93W610743, powered by Onan Performer 18XSL gas engine. In poor condition. (Not Running) (#146) 1973 LINCOLN Model SA-200-F-163, 200 Amp Skid Mounted Welder, s/n A712445, powered by 4 cylinder gas engine. In fair to poor condition. HOBART Champion 16 Skid Mounted Gas Powered Welder (Electrical Problems)HOBART Model Champion 10,000 Welder Generator, s/n LK080295Y, powered by Kohler CH680S gas engine. In good condition. (#115) 1964 MILLER Model Big 40 Skid Mounted Welder/Generator, s/n HE738872, powered by 4 cylinder gas engine. In fair condition. (Runs-Engine Problems)

(#287) 2008 GROUND HEATER Model E1100 Portable Hydraulic Heater, s/n 5822913, oil fired burner, electric winding hose reel, and 185/80D13 tires. In good condition with good tires. (#278) 2007 GROUND HEATER Model E1100 Portable Hydraulic Heater, s/n 01605, oil fired burner, electric winding hose reel, and 185/80D13 tires. In good condition with good tires.

20’ Overseas Storage Container, equipped with FORNEY FT40DR Concrete Test Machine; (2) Galvanized Curing Tubs with heaters; Electrical Outlets; Lights; and Styrofoam Insulation20’ Overseas Storage Container, equipped with FORNEY Hydraulic Test Machine with digital readout; (2) Galvanized Curing tubs; Electrical Outlets; and Lights20’ Overseas Storage Container, equipped with FORNEY FT40DR Concrete Test Machine; (2) Galvanized Curing Tubs with heaters; Electrical Outlets; Lights; and Styrofoam InsulationCLIPPER Model C-355-KBT Walk Behind Concrete Saw, s/n 87LM938610101, powered by Wisconsin 4 cylinder gas engineCLIPPER 30” Blade Capacity Walk Behind Concrete Saw, powered by Wisconsin 4 cylinder gas engineALLEN Concrete Screed Consisting of: 5’ section powered by Honda 8HP gas engine, (1) 5’ section with hydraulic winch, (1) 2’ section with hydraulic winch, (4) 5’ inserts, and (1) 2’ insert • (#255) E-Z DRILL Model 250 SRA Single Pneumatic Dowel Drill, s/n 11524 • Concrete Chutes • LARGE QUANTITY Galvanized Concrete Curing Tubs • (11) Electric Concrete Vibrators • (3) Gas Powered Backpack Concrete Vibrators • ALLEN Portable Cure Sprayer, Honda GX160 gas • AQUA FOG Turbo XE Portable Electric Mister • CENTRAL Concrete Vibrator • Aluminum Bull Floats • (2) Electric Concrete Vibrators • (14) FORNEY Air Press Meters • (6) Round Concrete Buckets • (5) Laydown Concrete Buckets

(#251) 1994 PROTECT-O-FLASH Solar Powered Portable Arrowboard, s/n 03943H8, equipped with Arrow Master III 1500 battery charger and manual raise, trailer mounted with 185/75R14 tires. In fair condition with good tires. (Missing Lights/Damaged)(#250) 1992 PROTECT-O-FLASH Solar Powered Portable Arrowboard, s/n 039264S, equipped with Arrow Master III 1500 battery charger and manual raise, trailer mounted with 185/75R14 tires. In fair condition with good tires.(#198) 1990 PROTECT-O-FLASH Solar Powered Portable Arrowboard, s/n 109044J, equipped with Arrow Master III 1500 battery charger and manual raise, trailer mounted with 185/75R14 tires. In fair condition with good tires.(#285) 2005 PRECISION SOLAR Model SMC-1000 Portable Message Board, s/n 5581, equipped with power raise, computer controls, (4) manual stabilizers, and 235/75R15 tires. In good condition with good tires.(#273) 2000 PRECISION SOLAR Matrix Portable Message Board, s/n 2511, equipped with power raise, model CPU-1M computer, (3) 8-character rows and radar, (4) manual stabilizers, and 235/75R15 tires. In good condition with good tires.(#276) 2000 PRECISION SOLAR Matrix Portable Message Board, s/n 2674, equipped with power raise, model CPU-1M computer, (3) 8-character rows, (4) manual stabilizers, and 235/75R15 tires. In good condition with good tires.(#253) 1995 PRECISION SOLAR Model SMC1000 Portable Message Board, s/n 01004, equipped with power raise, computer controls, radar, (3) 8-character rows, (4) manual stabilizers, trailer mounted with 235/75R15 tires. In fair condition with good tires.(#252) 1994 PRECISION SOLAR Model SMC1000 Portable Message Board, s/n 00551, equipped with power raise, computer controls, (3) 8-character rows, radar, (4) manual stabilizers, trailer mounted with 235/75R15 tires. In fair condition with very good tires.

LIGHT PLANTS

ELECTRIC CONVEYOR

RIGGING AND LIFTING

CONTRACTORS TOOLS

PORTABLE WELDERS

GROUND HEATERS

CONCRETE TEST CONTAINERS AND CONCRETE EQUIPMENT

ARROWBOARDS AND MESSAGE BOARDS

(1) OF (5) MESSAGE BOARDS

(1) OF (2) GROUND HEATERS

CONCRETE TEST CONTAINERS

ALLEN CONCRETE SCREED