Local algorithms for the prime factorization of strong product
12-1 Prime Time New Product Presentation · Microsoft PowerPoint - 12-1 Prime Time New Product...
Transcript of 12-1 Prime Time New Product Presentation · Microsoft PowerPoint - 12-1 Prime Time New Product...
23askforatwood.com
ATWOODON-DEMAND
WATERHEATERS
Endless Hot Water
Energy Efficient
Designed to Fit
24askforatwood.com
HOW ON-DEMAND WORKS
1. Hot water tap is turned on
2. Flow sensor detects flow of
cold water coming in
3. The burner is automatically
ignited
4. Water is instantly heated up
as it circulates through the
heat exchanger and out to
the tap
25askforatwood.com
ENDLESS HOT WATER
0 10 20 30 40 50 60
On-Demand
Tank
Since Atwood’s on-demand water heater instantly heats water, it can supply a constant
stream of hot water that is limited only by the fresh water supply.
Gallons of Hot Water Per Hour
Traditional
Tank
Water Heater
Atwood
On-Demand
Water Heater
26askforatwood.com
WEIGHT SAVINGS
0
25
50
75
100
125
150
Atwood
On-Demand
6-Gal Tank 10-Gal Tank 12 Gal Tank
+52 lbs.
+97 lbs.
+115 lbs.
An on-demand water heater does not use a tank, thus
eliminates up to 115 pounds of dead water weight.
Atwood
On-Demand6-Gallon
Tank
10-Gallon
Tank
12-Gallon
Tank
Only 30
lbs.
Water
Weight
Tank
Weight
27askforatwood.com
ENERGY EFFICIENT
ATWOOD ON-DEMAND
HOUR 1 HOUR 2 HOUR 3 HOUR 4 HOUR 5 HOUR 6 HOUR 7
Initial
tank
warm-
up
Heat
recovery
Heat
recovery
5 Minute
showerHeat
recovery
TRADITIONAL TANK
HOUR 1 HOUR 2 HOUR 3 HOUR 4 HOUR 5 HOUR 6 HOUR 7
5 Minute
shower
On-demand water heaters only heat water when it is needed. No wasted energy.
Traditional tank water heaters must turn on periodically to
maintain the stored hot water temperature.
28askforatwood.com
COLD WEATHER PERFORMANCE
High output burners deliver hotter water more days of the year.
Just because it is cold outside doesn’t mean you get a cold shower.
29askforatwood.com
SIMPLE OPERATION
1. Turn on HOTwater
2. Mix in COLD to reach
desired temperature
BRAND X
30askforatwood.com
MODULATION VALVE
A flow controlled valve adjusts the burner input from 16,000 - 45,000/50,000 BTUs
based on water flow rate (The slower the flow, the less heat that is needed). This
provides for optimal operating efficiency.
BRAND X ON-DEMAND
ATWOOD ON-DEMAND
2 settings only at 27,000 and 34,000 BTUs. Results in not enough
power on cold days and wasted energy on hot days.
31askforatwood.com
ONE SIZE FITS ALL
Wide side flanges and an adapter plate allow Atwood’s On-Demand to easily fit
the rough opening for all other brands of RV water heaters.
Fits 12.5” to 16” width
2-5/8” wide
flange
Adapter plate
required for
10-gallon (or larger)
water heater
openings only
32askforatwood.com
BENEFITS OF ATWOOD ON-DEMAND
� Performance – Class leading 45 and 50k BTU high output burners
deliver more hot water, more days of the year.
� Operation – No customer training needed. Turn on HOT and add
cold to get desired temperature. Just like home.
� Continuous hot water – No more RV showers. Hot water is only
limited by the fresh water supply.
� Save weight - No tank saves up to 100 lbs. of unnecessary water
weight.
� Energy efficient - Only uses energy when hot water is demanded.
� One size fits all – Designed to easily fit the rough opening for any
brand of RV water heater.
33askforatwood.com
One Size
Fits All
Design
High and
low
heating
modes
Heat
exchanger
Powerful
45k or 50k
modulating
burner
Only 30
lbs. (no
tank full
of water)
Two year
warranty
Adapter kit
10-Gallon+
rough
openings
Electronic
flow
sensor
Consistent
Hot Water
ATWOODON-DEMAND
WATER HEATERS