1/16 Always Surpassing Customers Expectations DID Features.

of 16 /16
1/16 Always Surpassing Customers Expectations DID Features DID Features

Embed Size (px)

description

3/16 Always Surpassing Customers Expectations 1. DID Flow Chart  DID Call Flow TYPE_2 Ring to Matched extension DID DGT CONV Type? TYPE_1 TYPE_0 DID DGT Conversion Ring to Matched extension Search Flexible DID Table (000~999) DID DGT RCV NO. PGM PGM PGM PGM 231 DID Call Ring to Valid Destination DID DGT RCV NO. DID DGT Conversion

Transcript of 1/16 Always Surpassing Customers Expectations DID Features.

12. DID Digit Conversion
There are three conversion types supported to promote efficiency of conversion
in accordance with the DID numbering; (PGM143 - F4)
Type 0 : Incoming DID digits are converted with Digit Conversion Mask.
The result is final DID destination number.
Type 1 : The incoming DID digit is the destination number. No conversion.
Type 2 : With a result of DID conversion TYPE 0, find the final destination
from flexible DID table conversion of ADMIN PGM 231.
Digit Conversion Type
e.g)
PSTN
1. Check if DID Digit Receive number is set to 4 at ADMIN 146.
2. Set DID Conversion Type as 2 (using Flexible DID Table) at ADMIN 143 – FLEX 4.
3. Program Flexible DID Table as below at ADMIN 231.
ADMIN 231 FLEX DID CONVERSION TABLE
2. DID Digit Conversion
Digit Conversion Type 2
& all sheets have contents.
FLEXIBLE DID CNV_TBL NO
INDICATED TBL NO.
DGT_MASK : #1** (PGM 146-BTN 6)
8502600
8502629
3. DID Destination
BUSY / ERROR / NO ANS Destination can be set at PGM167-F1~F3.
- Tone( : Send Tone & Disconnect )
- Hunt Grp
DID/DISA Destination
DID/DISA Destination Voice Prompt
Station CLIR (ON/OFF) : PGM 114 – F14
Station COLR (ON/OFF) : PGM 114 – F15
CO CLIP Table Index : PGM 143 - BTN 2
CO Type of calling number : PGM 143 - BTN 3
COLP Table : PGM 201
CLIP : decides to display caller’s CLI or not when a station receives an incoming call.
COLP : decides to display called party’s CLI or not when a station makes an outgoing call.
CLIR : inform to PX that this station doesn’t want to send CLI
to called party when it makes an outgoing call.
COLR : inform to PX that this station doesn’t want to send CLI
to calling party when receiving an incoming call.
PROGRAM
PGM143 BTN2
0(Unknown)
1(International)
2(National)
1(CO ATD : PGM200-BTN2)
- Call Type is set at PGM 143 – F3 (CO Base)
INTERNALTIONAL : A(90)+B(216)+C(474)+D(2200) 902164742200
NATIONAL : B(216)+C(474)+D(2200) 2164742200
SUBSCRIBER : C(474)+D(2200) 4742200
Ex) EXT 2200
PGM143 BTN2 – 01 (Index 01 of PGM201)
PGM201 ENTRY01 - “3283”
PGM114 BTN1
If CLI number is matched with speed number, the saved speed bin name is displayed.
If CLI is not matched or if there’s no name registered, only CLI number is displayed.
PGM114 BTN11
*
CLI Name Display
Display CLI & Name
CLIP DISPLAY (PGM114 F1) : ON
CLI NAME DISPLAY(PGM114 F11) : ON
8502824 LGNORTEL
8502824
7. Message waiting with CLI
When a DISA/DID call through DID line is received, the caller’s number is displayed on the LCD of the called party. If the caller hangs up the call before answered by the called party or attendant, the CLI number will be left into the original called party.
Station CLI MSG WAIT : PGM114 - F4(default : OFF)
When a DID CO Call is incoming,
1. The phone number(CLI) is displayed on the LCD of ringing station.
2. If it is not answered, the CLI is left on the LCD and LED of CALLBK btn starts to flashing.
To answer the message
2. Press the [HOLD/SAVE] button and press [ANSWER] button.
To delete
2. Press the [DEL CUR] button
Description
Operation
Program