11 Heinrich Müller Maschinenfabrik GmbH HMP Umformtechnik GmbH Incremental forming Radial...

11

Heinrich Müller Maschinenfabrik GmbHHMP Umformtechnik GmbH

Incremental forming

Radial oscillation of dies

Relative rotational movement between dies and workpiece

Rotary swaging: process

22


Rotary swaging: material flow

The rotary swaging process generates a homogenous material flow. The complete section of the workpiece is formed with similar strain. High forming ratios are possible, brittle materials can be formed.

33


Rotary swaging: FEM-simulation material flow

44


Rotary swaging: FEM-simulation tooling stress

55


Rotary swaging: operation principle swaging head

66


Rotary swaging: operation principle swaging head

77


Rotary swaging: number of dies

88


Rotary swaging: infeed swaging

99


Rotary swaging: infeed swaging

1010


Rotary swaging: plunge swaging

1111


Rotary swaging: plunge swaging

1212


Rotary swaging: swaging of non circular cross-sections

1313


Rotary swaging: swaging over a mandrel

1414



1515



1616


Rotary swaging: upsetting wall thickness

1717


Rotary swaging: local heating

1818


Rotary swaging: upsetting

1919


• dimensional application range: 0.2mm – 140mm outside diameter• very high forming ratios due to positive state of stresses• high flexibility / multiple design opportunities• low tooling costs / high life time of tooling• achieving high tolerances especially on the inside of tubular parts• possibility of producing very long parts as the forming force is applied radially• cold formed part / possibility of taking advantage of hardness increase• homogenous internal stress distribution / little deformation during heat

treatment

Highlights:

Rotary swaging

2020


Rotary swaging: machine design features

Counter Support

Heating Unit

Numerical Control Unit

Infeed Unit

Rotary Swaging Unit

2121



2222



2323


Rotary swaging: examples of applications

2424


Rotary swaging

Thank you for your attention. We look forward to getting an opportunity of providing a metal forming solution to you.

You are kindly invited to visit our company or our website:

www.hmp.com

11 Heinrich Müller Maschinenfabrik GmbH HMP Umformtechnik GmbH Incremental forming Radial...

Documents

Transcript of 11 Heinrich Müller Maschinenfabrik GmbH HMP Umformtechnik GmbH Incremental forming Radial...