10th European Conference on Turbomachinery · 2016-02-03 · Tech. Univ. Delft (NL) Dr. R. Vazquez...
Transcript of 10th European Conference on Turbomachinery · 2016-02-03 · Tech. Univ. Delft (NL) Dr. R. Vazquez...
1
10th European Conference onTurbomachineryFluid Dynamics and Thermodynamics
Technical program
15–19 April 2013 – Lappeenranta, Finland
2
10th European Conference onTurbomachineryFluid Dynamics and Thermodynamics
15–19 April 2013 – Lappeenranta, Finland
3
10th European Conference onTurbomachineryFluid Dynamics and Thermodynamics
The European Organising Committee
Chairman of the Committee:Prof. G. Bois, Arts et Métiers-ParisTech, Lille (F)
Paper Review Chairman:Prof. O. Léonard, Univ. Liège (B)
Prof. T. Arts, VKI, Rhode-Saint-
Genèse(B)
Prof. L. Bakken, NTNU, Trondheim
(N)
Prof. D. Bohn, RWTH, Aachen
(D)
Prof. G. Bois, ENSAM, Lille
(F)
Prof. G. Dibelius, Aachen
(D)
Prof. P. Doerffer,Polish Academy of Sciences, Warsaw
(PL)
Dr. M. Dumas, SAFRAN (Snecma)
(F)
Prof. T. Fransson, KTH, Stockholm
(S)
Prof. V. Gnesin, NASU, Kharkov
(UA)
Prof. A. Granovskiy, ALSTOM Power
Uniturbo, Moscow (RUS)
Prof. F. Heitmeir, Graz Univ. Tech.
(A)
Prof. H. Jericha, Graz Univ. Tech.
(A)
Prof. J. Backman, LUT (FIN)
Prof. O. Léonard Univ. Liège,
(B)
Prof. Y. Levy, Technion, Haifa
(IL)
Prof. M. Manna, Univ. Naples
(I)
Prof. F. Martelli, Univ. Florence
(I)
Dr. R. Miller, Univ. Cambridge
(GB)
Prof. V. Molnar, Slovak Tech. Univ.,
Bratislava(SK)
Dr. P. Ott, EPFL, Lausanne
(CH)
Prof. K. Papailiou, NTUA, Athens
(GR)
Mr. C. Scrivener, Consultant to Rolls-
Royce, Derby(GB)
Prof. M. Sen, Tech. Univ. Istanbul
(TR)
Prof. J. Seume, Univ. Hannover
(D)
Prof. C.H. Sieverding, VKI, Rhode-Saint-
Genèse(B)
Prof. M. Stastny, Plzen(CZ)
Prof. J. Vad, Univ. Budapest
(H)
Prof. J.P. Van Buijtenen,
Tech. Univ. Delft (NL)
Dr. R. Vazquez Diaz, ITP, Madrid,
(E)
Dr. E. Walsh, Univ. Limerick
(IRL)
Associated Engineering Associations
• Association of Czech Mechanical Engineers (CZ)• Associazione Termotecnica Italiana (I)• Komitet Problemow Energetyki P.A.N. (PL)• Koninklijke Vlaamse Ingenieursvereniging (B)• Institution of Engineers in Ireland (IRL)• Institution of Mechanical Engineers (GB)• Norsk Forening for Termiske
Strømningsmaskiner (NFTS) (N)
• Österreichischer Ingenieur- und Architekten – Verein (A)• Royal Institution of Engineers in
the Netherlands (Klvl) (NL)• Société Française des Mécanicien (F)• Svenska Mekanisters Riskforbund (S)• VDI-Gesellschaft Energietechnik (D)• Greek Technical Chamber (GR)
Secretary (ETC General)Prof. T. Arts, VKI, Rhode-Saint-Genèse (B)
4
GENERAL INFORMATION
The 10th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (ETC 10) is held in April 2013 in Lappeenranta (FIN), beginning on Monday, April 15 and concluding on Friday, April 19. The 5- days technical program is supplemented with a series of social events over the week fostering international friendship, discussions and collaborative ventures.
CONFERENCE VENUE
The conference will be held at Lappeenranta University of Technology Green Campus, which is situated 7 kilometers from the city center (see map on last page). The registration is at the main entrance adjacent to the Viipuri Hall, where the invited lectures take place every morning. The auditorium is the University’s largest hall and offers room for up to 500 people.
The 25 conference sessions will take place in three lecture halls at the third floor of the University, not far from the main entrance.
Conference Registration and Information Desk
The registration desk will be open from 8:00 AM until the early afternoon, from Monday, April 15 till Thursday, April 18 at the conference venue.
Conference Proceedings
The conference proceedings will be available on-site for attendees. A limited number of additional copies will be available on-site for 50 €, as well.
Updated Information will be available on the conference website www.etc10.eu.
THE CONFERENCE
Final Conference Technical Program
The final technical program is included in this brochure.
Speaker’s Briefing
The authors who are presenting their paper and the session chairs will meet for a short briefing fifteen minutes before the start of their session in the session room. Please attend on the day of your session only.
Time of Presentation
Each paper will be allocated 30 minutes (including introduction and question-and-answer period) except where noted otherwise. Concurrent sessions will maintain uniform starting times.
Audio-Visual Equipment
Each session room will be pre-set with the following equipment: an overhead projector, a computer projection system, a screen, a microphone and a PC (Windows 7, MS Office 2010, Adobe Acrobat Reader). Special audio-visual equipment which has been requested in advance will be available.
Messages and Information
Messages will be ordered and posted on the bulletin board in the registration area. The telephone number for reaching Local Chairman Jari Backman is 040 844 8414 and you can call any time.
5
Internet
Free WLAN access is provided in the conference venue. Personal account and password information can be found from your conference bag.
Smoking Policy
Smoking is not allowed in the conference venue. There are separate smoking areas outside the main building.
Restrictions
Video-taping or audio-recording of any session during this conference is prohibited. The sale of any publication not authorised by ETC10 is also prohibited.
Coffee breaks
Coffee, tea and small snacks are served during the coffee breaks in the morning and in the afternoon in the conference venue for free.
Lunch
Lunch coupons are provided for participants with full registration and day visitors to be used at the University Restaurant next to the Viipuri Hall. There is table space reserved for all conference participants. Please note the lunch is served buffet style.
The menu for lunch and coffee breaks is available at conference notice boards.
Next to the university main building is an alternative restaurant.
Information on the restaurants in Lappeenranta can be found at www.etc10.eu web site. Feel free to make your choice.
Travelling between hotels and the University
For your convenience, a free shuttle service will operate between Lappeenranta hotels and the University. A shuttle bus will depart for the conference in the morning and another will return to the city center in the evening after the last session on Monday 18.30 and other days at 18.45. The buses leave from the main entrance.
The morning buses will leave at the following times from the following hotels.
Route 1 Route 27.30 Spa Hotel 7.30 Hotel Cumulus7.35 Hotel Patria 7.35 Sokos Hotel Lappee8.00 LUT 7.45 Finnhostel Huhtiniemi 8.00 LUT
There are city bus connections to and from the university from the downtown area. Most of the bus drivers do not speak English, and you will need exact change or close to it. The one-way bus fare will be about 4€. Buses leave from downtown to the university every 15 minutes.
City bus stops are identified by a yellow rectangular sign with a picture of a bus. Buses 1 and 5 all travel back and forth between downtown (keskusta) and the university (yliopisto). The best place to catch the bus from downtown is the Town Centre Bus Stop (see map on last page), which is a 5 minute walking distance from all downtown hotels. The University is the last stop and hard to miss.
To get around town, you can find excellent taxi service. A taxi from downtown to the university costs about €15. There are taxi ranks in front of the main post office, at the railway station, and in the market place. The telephone number to reserve a taxi is 0200 60 400
6
ETC10 CONFERENCE PROGRAM AT A GLANCEMonday, April 15th
08.00-10.00 Registration and Coffee at the University Main entrance
10.00-10.15 Opening Ceremony in Viipuri hall10.15-11.15 Invited Lecture: John Whurr, Rolls
Royce plc, UK11.30-13.00 Session A-01 Pumps
Session B-01 Turbines - Secondary Flows13.00-14.15 Lunch14.15-15.45 Session A-02 Compressors - Secondary Flows (1)
Session B-02 Hydraulic Turbines15.45-16.15 Coffee Break16.15-18.15 Session A-03 Acoustics (1)
Session B-03 Measurement Techniques19.00-20.30 Euroturbo 10 Welcome Reception at Lappeenranta
Old City Hall
Tuesday, April 16th
08.30–09.30 Invited Lecture: Prof. Ricardo Martinez-Botas, Imperial College, UK
09.30-10.00 Coffee Break10.00-12.30 Session A-04 Vibrations
Session B-04 Acoustics (2)12.30-14.00 Lunch14.00-16.00 Session A-05 Compressors - Secondary Flows (2)
Session B-05 Steam Turbines (1)Session C-05 Optimization
16.00-16.30 Coffee Break16.30-18.30 Session A-06 Compressors - Stall and Surge
Session B-06 Turbines - CFD (1)Session C-06 Radial Compressors
19.00-21.00 ETC Committee Meeting
Wednesday, April 17th
08.30–09.30 Invited Lecture: Prof. Timo Siikonen, Aalto University, Finland
09.30-10.00 Coffee Break10.00-12.30 Session A-07 Fans
Session B-07 Steam Turbines (2)12.30-14.00 Lunch14.00-16.00 Session A-08 Compressors - Unsteady Flows (1)
Session B-08 Turbines - Heat Transfer (1)Session C-08 Basic Phenomena
16.00-16.30 Coffee Break16.30-18.30 Session A-09 E-CAero Mini-Symposium19.30-22.00 Conference Gala Dinner at Imatra
Castle Valtionhotelli
7
Thursday, April 18th
08.30–09.30 Invited Lecture: Prof. Victor Mileshin, CIAM, Russia
09.30-10.00 Coffee Break10.00-12.30 Session A-10 Compressor Design
Session B-10 Turbines - CFD (2)12.30-14.00 Lunch14.00-16.00 Session A-11 Compressors - Unsteady Flows (2)
Session B-11 Turbines - Heat Transfer (2)16.00-16.30 Coffee Break16.30-18.30 Session A-12 Diffusers
Session B-12 Turbines - Heat Transfer (3)19.00-21.00 ETC Committee Meeting
Friday, April 19th
08.00-15.00 Technical Tours
Imatra Castle Valtionhotelli
8
Monday, April 15, 2013
08:00-10:00
Registration, Main Lobby
Coffee at the main restaurant premises
10:00-10:15
Opening Ceremony, Viipuri Hall
Prof. J. Partanen, LUT - Program Director of LUT Energy
Prof. G. Bois, Arts et Métiers PARISTECH, Lille, France - ETC Chairman
Prof J. Backman, LUT - Local Organization Chairman
10:15-11:15
Invited Lecture 1 – Viipuri Hall
Future Engine Architecture and Technologies
John Whurr, Rolls-Royce plc, United Kingdom
Chairman: Prof. G. Bois (Arts et Métiers PARISTECH, Lille, France) - ETC Chairman
A sessions lecture hall 1381
A-01: Pumps
Chairman: Prof. M. Sen; Istanbul Technical University, Turkey
B sessions lecture hall 1382
B-01: Turbines - Secondary Flows
Chairman: Dr. M. Goodhand, University of Cambridge, United Kingdom
11:30-12:00
A041
Unsteady velocity PIV measurements and 3D numerical calculation comparisons inside the impeller of a radial pump model
Cavazzini, G., Pavesi G.; University of Padova, Italy; Dupont, P.; Ecole Centrale de Lille, France; Dazin, A., Bayeul, A.C., Bois, G.; Arts et Métiers PARISTECH, Lille, France
B022
On the interaction of streamwise vorticity with a rotating turbine blade
Schneider, C.M, Schrack, D., Rose, M.G., Staudacher S.; University of Stuttgart; Guendoglu, Y., Engel, K.; MTU Aero Engines, Munich, Germany
12:00-12:30
A120
Design of the primary liquid-metal pump of the Myrrha research reactor
Mueller, L., Verstraete, T., Arts, T.; von Karman Institute for Fluid Dynamics, Rhode Saint Genèse, Belgium
B085
Experimental and numerical investigations to extend the validity range of a turbine loss correlation for ultra-low aspect ratios in transonic flow
Beschorner, A., Vogeler, K.; Technical University Dresden; Goldhahn, E., Huhnd, M.; Airbus, Bremen, Germany
12:30-13:00
B139
Steam flow through a two-stage turbine with rotor drum arrangement
Hoznedl, M., Tajč, L.; Doosan Škoda Power, Plzeň, Czech Republic
13:00–14:15 Lunch
9
A-02: Compressors - Secondary Flows (1)
Chairman: Dr. M. Dumas; Snecma, Groupe Safran, Villaroche, France
B-02: Hydraulic turbines
Chairman: Prof. G. Bois; Arts et Métiers PARISTECH, Lille, France
14:15-14:45 A060
Circumferential grooves for a modern transonic compressor: Aerodynamic effects, benefits and limitations
Goinis,G., Voß, C., Aulich, M.; German Aerospace Center (DLR), Cologne, Germany
B049
Numerical simulations of Small Turbodrill performance
Mokaramian, A., Rasouli, V.; Curtin University, Perth, Australia; Cavanough, C.; Queensland Centre for Advanced Technologies, Brisbane, Australia
14:45-15:15 A070
An advanced axial-slot casing treatment on a tip-critical transonic compressor rotor Part 1: Unsteady hot wire and wall pressure measurements
Brandstetter, C., Wartzek, F., Schiffer, H.-P.; TU Darmstadt; Streit, J.A.; TU München; Heinichen, F.; Rolls-Royce Deutschland, Germany
B165
Numerical Analyses of a Cavitating Pelton Turbine
Pavesi, G., Rossetti, A., Ardizzon, G.; University of Padova; Santolin, A.; Tamanini Hydro, Mattarello, Italy
15:15-15:45 A068
An advanced axial-slot casing treatment on a tip-critical transonic compressor rotor
Part 2: Taking a closer look with CFD
Streit, J.A., Kau, H.-P.; TU München; Brandstetter, C., Heinichen, F.; TU Darmstadt Germany
15:45 - 16:15 Coffee break
Did you know...
that there are actually over 188,000 lakes in Finland? Some areas of the Finnish lakeland have up to 1000 lakes per 100 km². There are about 98,000 islands in these lakes. In the bordering seas, there are about 81,000 more islands.?
Monday, April 15, 2013 continued
Monday, April 15, 2013 >>
10
A-03 : Acoustics (1)
Chairman: Prof. S. Moreau; University of Sherbrooke, Canada )
B-03: Measurement Techniques
Chairman: Prof. J. von Wolfersdorf; University of Stuttgart, Germany
16:15-16:45
A230
Separation control by acoustic excitation on highly loaded low pressure turbine blades
Bernardini, C., Benton, S.I., Bons, J.P.; Ohio State University, Columbus, Ohio, USA.
B054
Predicted performance of brush seals: porous medium versus resolved bristle matrix and comparison with experimental data
Pugachev, A.O.; Technical University Munich, Germany
16:45 – 17:15
A032
Assessment of numerical methods for low pressure turbine tone noise prediction
Pinelli, L., Poli, F., Arnone,A.; University of Florence; Torzo, D.; Avio S.p.A., Torino, Italy
B098
Model-based control and diagnostic techniques for operational improvements of gas turbine engines
Panov, V., Siemens Industrial Turbomachinery LTD, Lincoln, United Kingdom
17:15- 17:45
A007
On the modal sound field at the outlet of a turbocharger centrifugal compressor
Habing, R.A., Feld, H.-J.; ABB Turbo Systems Ltd, Baden, Switzerland
B188
Aircraft engine sensor fault detection, isolation and reconfiguration using fuzzy logic control based unknown input observer
Yazar, I.; Eskisehir Osmangazi University; Kiyak, E.; Anadolu University, Eskisehir, Turkey
17:45 – 18:15
A109
Sensitivity and uncertainty of the radial mode analysis for turbomachinery applications
Laguna, J.D, Bartelt, M., Keller, C., Seume, J.R.; Leibniz University of Hannover, Germany
Monday, April 15, 2013 continued
Did you know...
that Finland has been a Sovereign Parliamentary Republic since 1917? The president is elected every six years. There are 200 elected members of Parliament that serve four-year terms. The Finnish government includes a multiparty coalition Cabinet of Ministers. Currently, the president of Finland is Sauli Niinistö and the Prime Minister is Jyrki Katainen.?
11
Tuesday, April 16, 2013
8:30-9:30
Invited Lecture 2 – Viipuri Hall
Unsteady aerodynamics in small turbocharger turbines: time scales, performance and flow behaviour
Prof. Ricardo Martinez-Botas, Imperial College, United Kingdom
Chairman: Prof. J. Backman - (Lappeenranta University of Technology, Finland) - Local Organization Chairman
9:30 - 10:00 Coffee break
A sessions lecture hall 1381
A-04: Vibrations
Chairman: Prof. J. Larjola; LUT, Lappeenranta, Finland
B sessions lecture hall 1382
B-04: Acoustics (2)
Chairman: Prof. M. Roger; Ecole Centrale de Lyon, France and Dr. R. Habing; ABB Turbo Systems,
Baden, Switzerland
C sessions lecture hall 1383
10:00-10:30 A010
Numerical analysis of compressor blade flutter in modern gas turbine engines
Vedeneev, V.; Lomonosov Moscow State University; Kolotnikov, M., Makarov, P.; Gas-turbine Engineering Research and Production Center “Salut”, Russia
B210
Numerical assessment of the noise emission of counter-rotating open rotors
Soulat, L., Kernemp, I., Fernando, R.; Safran Snecma, Moissy-Cramayel, France; Moreau, S.; University of Sherbrooke, Canada
10:30-11:00 A066
Experimental aeroelastic investigation of vibrating turbine blade clusters
Zanker, A., Ott, P.; Ecole Polytechnique Fédérale de Lausanne, Switzerland; Calza, P.; Avio S.p.A., Turin, Italy
B119
Three-dimensional gusts for the prediction of tonal fan noise
de Laborderie, J., Moreau, S.; University of Sherbrooke, Canada
11:00-11:30 A090
The unsteady low-frequency aerodynamic forces acting on rotor blades in the first two stages of a jet engine axial compressor in the case of a bird strike
Rzadkowski, R.; Polish Academy of Sciences, Gdansk, Poland; Gnesin, V., Kolodyazhnaya, L.; National Academy of Sciences of Ukraine; Szczepanik, R.; Air Force Institute of Technology, Warszawa, Poland
B135
Impact of the large-scale environment on the tonal noise of axial fans
Sturm, M., Carolus, T.; University of Siegen, Germany
Tuesday, April 16, 2013 >>
12
11:30-12:00 A113
Influence of regeneration-induced variances of stator vanes on the vibration behavior of rotor blades in axial turbines
Aschenbruck, J., Meinzer, C.E., Seume, J.R.; Leibniz University of Hannover,Germany
B081
Optimization and validation of trailing edge blowing for the reduction of rotor-stator interaction noise
Kohlhaas, M., Bamberger, K., Carolus, T.; University of Siegen, Germany
12:00-12:30 A224
Physics of vibrating low-pressure turbine airfoils
Vega A.; Polytechnic University, Madrid; Corral, R.; Industria de Turbo Propulsores, S.A., Madrid, Spain
Tuesday, April 16, 2013 continued
12:30 – 14:00 LunchA-05: Compressors
- Secondary Flows (2)
Chairman: Prof. C. Sieverding; von Karman Institute, Belgium
B-05: Steam Turbines (1)
Chairman: Dr. T. Coton; GE Energy, Belfort, France
C-05: Optimization
Chairman: Prof. T. Verstraete; von Karman
Institute, Belgium 14:00-14:30 A047
Control of secondary flow structures on a highly loaded compressor cascade
Zander, V., Nitsche, W.; TU Berlin, Germany
B067
Enhanced loss prediction for admission through circumferential slots in axial steam turbines
Engelmann, D., Schramm, A., Mailach, R.; Ruhr-University of Bochum; Polklas, T., Schwarz, M.A.; MAN Diesel & Turbo SE, Oberhausen, Germany
C009
Adjoint optimisation of a high pressure turbine stage for a lean-burn combustion system
Shahpar, S., Caloni S.; Rolls-Royce plc, Derby, United Kingdom
14:30-15:00 A025
Automated optimization of the non-axisymmetric hub endwall of an axial compressor
Reutter, O., Hervé, S., Nicke, E.; German Aerospace Center (DLR), Cologne, Germany
B116
High speed aerodynamic investigation of the midsection of a 48” rotor blade for the last stage of steam turbine
Luxa, M., Šimurda, D.; Institute of Thermomechanics AS CR, Prague; Šafařík, P.; Technical University in Prague; Synáč, J., Rudas, B.; Doosan Skoda Power, Pilsen, Czech Republic
C184
Low weight, high speed automotive fan design by 3D inverse method
Henner, M., Demory, B.,Beddadi, Y., Bonnet, P.A.; Valeo Thermal Systems, La Verrière, France; Pengue, F.; Advanced Design Technology Dilke House, London United Kingdom; Zangeneh, M.; University College London, United Kingdom
15:00-15:30 A159
Vortex development induced by part gap geometry and endwall configurations for variable stator vanes in a compressor cascade
Gottschall, M., Vogeler, K.; TU Dresden, Germany
B038
A generic steam turbine exhaust diffuser with tip leakage modelling and non-uniform hood outlet
Burton, Z., Ingram, G., Hogg, S.; Durham University, United Kingdom
C205
Thermodynamical and mechanical modelling analysis of high-speed turbomachine rotors
Saari, E., Backman, J., Larjola, J.; Lappeenranta University of Technology, Finland
13
Tuesday, April 16, 2013 continued
15:30-16:00 A152
Experimental investigations of endwall flow in a highly loaded annular compressor stator cascade
Beselt, C., Peitsch, D.; TU Berlin, Germany
B214
Modelling of nuclear power plant steam turbines with simplifications
Punnonen, P., Kaikko, J., Backman, J.; Lappeenranta University of Technology; Savolainen, S., Fortum Power and Heat Oy, Loviisa, Finland
16:00 - 16:30 Coffee breakA-06: Compressors
- Stall and Surge
Chairman: Mr. C. Scrivener; Consultant to Rolls-Royce, Derby
United Kingdom
B-06: Turbines - CFD (1)
Chairman: Prof. F. Martelli, University of Florence, Italy
C-06: Radial Compressors
Chairman: Prof. I. Trebinjac; Ecole Centrale de Lyon,
France and Prof. R. Martinez-Botas, Imperial College, London, United Kingdom
16:30-17:00 A087
Simulation of near surge instabilities onset in a turbocharger compressor
Després, G., Ngo Boum, G., Lebœuf, F.; Ecole Centrale de Lyon ; Chalet, D., Chesse, P.; Ecole Centrale de Nantes, ; Lefebvre, A.; RENAULT, Lardy, France
B121
High-order discontinuous Galerkin solution of the RANS and explicit algebraic Reynolds stress κ−ω equations in turbomachinery flows
Bassi, F., Botti, L., Colombo, A., Franchina, N.; University of Bergamo, Ghidoni, A., Rebay, S.; University of Brescia, Nigro, A.; University of Calabria, Italy
C004
The design of ultra-high-speed miniature centrifugal compressors
Casey, M.V.; PCA Engineers Limited, Lincoln, United Kingdom and University of Stuttgart, Germany Krähenbuhl, D., Zwyssig, C.; Celeroton AG, Zurich, Switzerland
17:00-17:30 A110
Unsteady wall pressure measurement in an one-and-a-half stage axial transonic compressor during stall inception
Biela, C., Brandstetter, C., Schiffer, H.-P.; TU Darmstadt; Heinichen, F.; Rolls-Royce Deutschland Ltd, Germany
B073
Steady CFD simulations of trailing edge film cooling in a linear nozzle vane cascade
Ravelli, S., Miranda, M., Barigozzi, G.; University of Bergamo, Italy
C015
Shroud contour optimization for a turbocharger centrifugal compressor trim family
Dickmann, H.-P.; ABB Turbo Systems Ltd, Baden, Switzerland
17:30-18:00 A128
Study of the acoustic resonance occurring in a multistage high-speed axial compressor
Courtiade, N., Ottavy, X.; Ecole Centrale de Lyon, France
B126
Numerical investigation on the influence of anisotropic surface structures on the skin friction
S.Hohenstein, S., Seume, J.R.; Leibniz University of Hannover, Germany
C052
The effects of Reynolds number and roughness on compressor performance
Dietmann, F.; University of Stuttgart, Germany; Casey, M.V.; PCA Engineers, Lincoln, United Kingdom
18:00-18:30 A141
Influence of the clearance size on rotating instability in an axial compressor stator
Beselt, C., van Rennings, R., Sorge, R., Peitsch, D., Thiele, F., Ehrenfried, K., Thamsen, P.-U.; TU Berlin ; Pardowitz, B., Enghardt, L.; German Aerospace Center(DLR), Berlin, Germany
14
Wednesday, April 17, 2013
8:30-9:30
Invited Lecture 3 – Viipuri Hall
Turbulence Modelling in CFD
Prof. Timo Siikonen, Aalto University, Finland
Chairman: Mr. Colin Scrivener (Consultant to Rolls-Royce plc, Derby, United Kingdom)
9:30 - 10:00 – Coffee breakA sessions lecture hall 1381
A-07: Fans
Chairman: Dr. X. Carbonneau, ISAE, Toulouse, France
B sessions lecture hall 1382
B-07: Steam Turbines (2)
Chairman: Dr T. Polklas; MAN Diesel & Turbo SE, Oberhausen,
Germany
10:00-10:30 A029
Study on the effects of axial clearance size on the operation of an axial flow electric motor cooling fan
Vad, J., Horváth, Cs.,; Budapest University of Technology and Economics, Hungary
B002
Two-fluid model for prediction of wet steam flow
Dykas, S., Wróblewski, W.; Silesian University of Technology, Gliwice, Poland
10:30-11:00 A091
Experimental comparison between a counter-rotating axial-flow fan and a conventional rotor-stator stage
Wang, J., Ravelet, F., Bakir, F.; Arts et Metiers ParisTech, Paris, France
B005
Experimental study of the effects of temperature variation on droplet size and wetness fraction in a low pressure model steam turbine
Eberle, T., Schatz, M., Starzmann, J., Grübel, M.; University of Stuttgart, Germany; Casey, M.; PCA Engineers, Lincoln, United Kingdom
11:00-11:30 A162
Experimental analysis of the flow through the fan stage of a high-bypass turbofan in windmilling conditions
García Rosa, N., Pilet, J., Barènes, R., Lavergne, G.; Université de Toulouse; Lecordix, J.-L.; Snecma, Moissy-Cramayel, France
B104
Modelling unsteadinesses and polydispersion in wet steam flows using the quadrature method of moments and a two-equation model
Blondel, F., Stanciu, M.; Electricite de France, Chatou; Leboeuf, F., Lance, M.; Ecole Centrale de Lyon, France
11:30-12:00 A189
Numerical investigation on the aerodynamics of a tunnel ventilation fan during pressure pulses
Borello, D., Corsini, A., Delibra, G., Rispoli, F; University of Rome, Italy; Sheard, A.G.; Flakt Woods Ltd., Colchester, United Kingdom
B211
Condensation of steam with chemical impurity in a turbine
Štástný, M.; West Bohemia University, Plzeň; Šejna, M.; PC Progress, Praha; Synáč, J., Šimka, Z.; Škoda Power, Plzeň, Czech Republic
15
12:00-12:30 A094
Potential of power recovery of an axial fan in windmilling operation
Courty-Audren, S., Binder, N., Carbonneau, X.; University of Toulouse; Challas, F.; Safran - Technofan, France
B140
Influence of Vane Carrier Design in Steam Extraction Modules on the Flow Conditions of the Subsequent Turbine Stage
Schramm, A., Engelmann, D., Mailach, R.; Ruhr-Universität Bochum; Polklas, T., Brunn, O.; MAN Diesel & Turbo SE, Oberhausen, Germany
12:30 – 14:00 Lunch
A-08: Compressors - Unsteady Flows (1)
Chairman: Prof. M. Casey; University of Stuttgart, Germany
B-08: Turbines - Heat Transfer (1)
Chairman: Prof. G. Barigozzi; University of Bergamo, Italy
and Prof. T. Arts; von Karman Institute, Belgium
C-08: Basic Phenomena
Chairman: Prof. M. Manna; University of Naples, Italyy)
14:00-14:30 A124
Performance prediction and optimization of low pressure axial fans by artificial neural networks
Bamberger, K., Carolus, T.; University of Siegen, Germany
B017
Application of thermochromic liquid crystal mixtures for transient heat transfer measurements
Waidmann, C., Poser, R., von Wolfersdorf, J.; University of Stuttgart, Germany
C042
Application of a new numerical solver to turbomachinery flow problems
Wan, B.; China University of Mining & Technology Xuzhou, P. R. China; Benra, F.-K., Dohmen, H.J.; University of Duisburg-Essen, Germany
14:30-15:00 A147
Numerical simulation of a compressor facility test trig at near-surge operating conditions
Crevel, F.; Snecma Villaroche; Gourdain, N.; CERFACS, Toulouse; Wlassow, F.; Turbomeca, Bordes, France
B020
Experimental investigation of unsteadiness associated with film cooling flow ejection from the vane pressure side
Barigozzi, G., Ravelli, S.; University of Bergamo; Armellini, A., Mucignat, C., Casarsa, L.; University of Udine, Italy
C023
“TurboSphere” – Multistage micro turbine for secondary energy sources recovery
Levkov, K.; National Technical University, Minsk, Belarus
Wednesday, April 17, 2013 continued
Wednesday, April 17, 2013 >>
Did you know...
that forests (mainly pine and spruce) cover 68% of the ground area of Finland? Private persons - ordinary Finnish citizens - own 52% of all forest land. The number of individual private forest owners is estimated at 920,000. That means that almost every fifth Finn is a forest owner.?
16
15:00-15:30 A157
Quantification of the numerical solution sensitivity to tip clearance dimensions in an axial multistage compressor
Mouret, G, Gourdain, N.; CERFACS, Toulouse, France
B115
Low speed numerical and experimental validation of a solving methodology for the inverse heat conduction problem by means of quantitative infra-red thermography
Baldani, F., Bosschaerts, W.; Belgium Royal Military Academy, Brussels, Belgium; Harmand, S.; University of Valenciennes, France; Arts, T.; von Karman Institute, Belgium
C212
Investigation of the roughness strip effects on the separation-induced transition with the γ-R̃eθt transition model on a high-lift low-pressure turbine rotor blade at steady conditions
Llobet, J.R., Babajee, J., Arts, T.; von Karman Institute, Rhode Saint Genese, Belgium
15:30-16:00 B129
Heat transfer and friction in circular ducts with shaped ribs
Bonanni, L., Da Soghe, R., Facchini, B., Micio, M., Pievaroli, M., Tarchi, L.; University of Florence; Abba, L., Maritano, M.; Ansaldo Energia S.p.A., Genova, Italy
C218
Performance improvement of a radial ORC turbine by means of automated CFD design
Harinck, J., Pecnik, R., Colonna, P.; Delft University of Technology, The Netherlands; Pasquale, D.; Università degli Studi di Brescia, Italy; van Buijtenen, J.; Tri-O-Gen B.V.; The Netherlands
16:00 - 16:30 – Coffee break
A-09: E-CAero Mini-Symposium
Chairman: Mr C. Scrivener; Consultant to Rolls-Royce, Derby United Kingdom
16:30 – 18:30FUTURE AERO-ENGINE DESIGN
Key research and development issues
a EUROTURBO-EUCASS-ERCOFTAC joint event
Wednesday, April 17, 2013 continued
17
Thursday, April 18, 2013
8:30-9:30
Invited Lecture 4 – Viipuri Hall
Numerical and experimental investigation of bypass fan stage models and high loaded compressor stages for development of new fan and high pressure
compressor for advanced engines
Prof. Victor Mileshin, CIAM, Russia
Chairman: Prof. Francesco Martelli (University of Florence, Italy)
9:30 - 10:00 – Coffee breakA sessions lecture hall 1381
A-10: Compressor Design
Chairman: Prof. J. Seume; Leibnitz University of Hannover, Germany and Prof. J. Vad;
Budapest University of Technology, HungaryD
B sessions lecture hall 1382
B-10: Turbines - CFD (2)
Chairman: Dr R. Corral; Industria de TurboPropulsores, SA, Madrid, Spain
10:00-10:30 A044
Performance testing of a low-pressure compressor
Sans, J., Desset, J., Dell’Era, G., Brouckaert, J.-F.; von Karman Institute, Rhode Saint Genèse; Hiernaux, S.; Techspace Aero, Milmort, Belgium
B039
A numerical comparison on the aerodynamic performances of a two-stage two-spool turbine facility predicted by steady and unsteady simulations
Spataro, R., Göttlich, R., Santner, C., Heitmeir, F.; Graz University of Technology, Austria
10:30-11:00 A183
HPC design based on multidisciplinary numerical simulation
Temis, J., Selivanov, A., Yurchenko, G., Yakushev, D., Novokreshchenov, V.; CIAM, Moscow, Russia
B132
Evaluation of unsteady CFD models applied to the analysis of a transonic HP turbine stage
Giovannini, M., Marconcini, M., Arnone, A.; University of Florence; Bertini, F., Avio Group, Rivalta di Torino, Italy
11:00-11:30 A185
Three-dimensional near wall flow phenomena of a tandem cascade
Frey, T., Böhle, M.; TU Kaiserslautern, Germany
B201
Application of harmonic balance method to the simulation of unsteady rotor/stator interaction in the single stage
Grigoriev, A.V., Iakunin A.I., Kuznechov N.B.; JSC ‘Klimov’, St – Petersburg; Kondratiev V.F., Kortikov N.N.; St - Petersburg State Polytechnical University, Russia
11:30-12:00 A082
Aerodynamic design studies of a transonic centrifugal compressor impeller based on automated 3D-CFD optimization
Raitor, T., Reutter, O., Aulich, M., Nicke, E.; German Aerospace Center (DLR), Cologne, Germany
B011
Semi automated improvement of wind blade design
Perfiliev, D., Kosmacheva, A., Backman, J., Hämäläinen, J.; Lappeenranta University of Technology, Finland
18
12:00-12:30 A096
New double-shaft compressor for two-shaft combined cycle power units and prospects of their application
Zaryankin, A.E., Mager, A.E., Rogalev, A.N.; Moscow Power Engineering Institute, Russia
B131
Small horizontal axis wind turbine: analytical blade design and comparison with RANS-predicted flow field and performance data
Gerhard, T., Carolus, T.H., University of Siegen, Germany
12:30 – 14:00 Lunch
Thursday, April 18, 2013 continued
A-11: Compressors - Unsteady Flows (2)
Chairman: Prof. F. Heitmeir; TU Graz, Austria
B-11: Turbines - Heat Transfer (2)
Chairman: Dr P. Ott ; Ecole Polytechnique Fédérale de
Lausanne, Switzerland14:00-14:30 A079
Study of the aerodynamic instabilities in an axial air compressor using 3D-1D codes coupling approach
de Crécy, F., Després, G., Ngo Boum, G., Lebœuf, F.; Ecole Centrale de Lyon, France
B111
A Comparative study of RANS, URANS and NLES approaches for flow prediction in pin fin array
Carnevale, M., Salvadori, S., Martelli, F.; University of Florence; Manna, M.; University of Naples, Italy
14:30-15:00 A186
Modelling rotor-rotor interaction on reduced reduced passage counts using a time-domain Fourier approach
Stapelfeldt, S.C., di Mare, L.; Imperial College London, United Kingdom
B170
Comparison of stationary internal cooling passage numerical simulations to experimental data
McGilvray, M., Ryley, J., Gillespie, D.; University of Oxford; Orozco Piñeiro, C., Axe, T.; Rolls-Royce plc, Derby, United Kingdom
15:00-15:30 A136
Evolution of the aerodynamic stability of an oscillating annular compressor cascade with inlet reverse flow condition variations
Chenaux, V.A; Ecole Polytechnique Fédérale de Lausanne, Switzerland; Schönenborn, H.; MTU Aero Engines GmbH, München, Germany; Ott, P.; Ecole Polytechnique Fédérale de Lausanne, Switzerland
B203
CHT analyses of an industrial gas turbine blade: comparison between an in-house developed decoupled procedure and CFD coupled simulations
Andrei, L., Andreini, A., Bonini, A., Da Soghe, R., Facchini, B., Mazzei, L.; University of Florence; Ciani, A., Innocenti, L.; GE Oil & Gas, Florence, Italy
15:30-16:00 A097
Description of the unsteady flow pattern from peak efficiency to near surge in subsonic centrifugal compressor stage
Bousquet, Y., Carbonneau, X., Dufour , G.; Université de Toulouse; Trébinjac, I.; Ecole Centrale de Lyon; Roumeas, M.; Liebherr – Aerospace, Toulouse, France
B223
Loosely coupled fluid/solid heat transfer analysis using a dynamic HTC approach
Corral, R., Chaquet, J.M., Pastor, G.; Industria de Turbo Propulsores S.A, Madrid; Wang, Z.; Polytechnic University, Madrid, Spain
16:00 - 16:30 – Coffee break
19
Thursday, April 18, 2013 continued
A-12: Diffusers
Chairman: Mr. H.P. Dickmann; ABB Turbo Systems, Baden, Switzerland
B-12: Turbines - Heat Transfer (3)
Chairman: Prof. T. Arts; von Karman Institute, Belgium
16:30-17:00 A065
The tip clearance effects on the centrifugal compressor vaneless diffuser flow fields at off-design conditions
Jaatinen-Värri, A., Turunen-Saaresti, T., Grönman, A., Röyttä, P., Backman, J.; Lappeenranta University of Technology, Finland
B130
Experimental investigation on the heat transfer in a turbine airfoil leading edge region: effects of the wedge angle and jet impingement geometries
Facchini, B., Maiuolo, F., Tarchi, L.; University of Florence, Italy; Ohlendorf, N.; ALSTOM, Baden, Switzerland
17:00-17:30 A156
Temporal behavior of a boundary layer separation within a radial vaned diffuser
Marsan, A., Coste, S. Leroy, G.; Turbomeca, Bordes; Trébinjac, I.; Ecole Centrale de Lyon, France
B143
Film-cooling adiabatic effectiveness measurements on a real high pressure turbine blade
Facchini, B., Picchi, A., Tarchi, L.; University of Florence; Ciani, A., D’Ercole, M., Innocenti, L.; GE Oil & Gas, Florence, Italy
17:30-18:00 A179
New stabilization methods of flows in plane, conic and annular diffusers
Zaryankin, A., Noskov, V., Grigoriev, E.; Moscow Power Engineering Institute, Russia
B161
Stationary internal cooling passage experiments for an engine realistic configuration
Riley, J.C., McGilvray, M., Gillespie, D.; University of Oxford, United Kingdom
18:00-18:30 A033
Review and collection of preliminary design rules for low solidity diffusers
Grönman, A., Backman, J.; Lappeenranta University of Technology, Finland; Dietmann, F., Casey, M.V.; University of Stuttgart, Germany
B168
Investigations of heat transfer and pressure loss in an engine-similar two-pass internal blade cooling configuration
Waidmann, C., Poser, R., von Wolfersdorf, J.; University of Stuttgart; Fois, M., Semmler, K.; MTU Aero Engines GmbH, Munich, Germany
Did you know...
that Finns really love coffee? The population of Finland consumes more coffee per person than anywhere else in the world. Their 12 kg of coffee consumption per capita is 20% more than the next most coffee loving folk, the Norwegians.?
20
AUTHOR INDEx(Author and Session)
Abba, L. B129Andrei, L. B203Andreini, A. B203Ardizzon, G. B165Armellini, A. B020Arnone, A. A032, B132Arts, T. A120, B115,
C212Aschenbruck, J. A113Aulich, M. A060, A082Axe, T. B170Babajee, J. C212Backman, J. A033, A065,
A205, B011, B214
Bakir, F. A091Baldani, F. B115Bamberger, K. A124, B081Barènes, R. A162Barigozzi, G. B020, B073Bartelt, M. A109Bassi, F. B121Bayeul, A.C. A041Beddadi, Y. A184Benra, F. C042Benton, S.I. A230Bernardini, C. A230Bertini, F. B132Beschorner, A. B085Beselt, C. A141, A152Biela, C. A110Binder, N. A094Blondel, F. B104Bois, G. A041Bonanni, L. B129Bonini, A. B203Bonnet, P.A. A184Bons, J.P. A230Borello, D. A189Bosschaerts, W. B115Botti, L. B121Bousquet, Y. A097Brandstetter, C. A068, A070,
A110Brouckaert, J-F. A044Brunn, O. B140Burton, Z. B038Böhle, M. A185Caloni, S A009Calza, P. A066Carbonneau, X. A094, A097
Carnevale, M. B111Carolus, T.H. A124, B081,
B131, B135Casarsa, L. B020Casey, M. A033, B004,
B005, B052Cavanough, C. B049Cavazzini, G. A041Chalet, D. A087Challas, F. A094Chaquet, J.M. B223Chenaux, V.A. A136Chesse, P. A087Ciani, A. B143, B203Colombo, A. B121Corral, R. A224, B223Corsini, A. A189Coste, S. A156Courtiade, N. A128Courty-Audren, S. A094Crevel, F. A147Da Soghe, R. B129, B203Dazin, A. A041de Crécy, F. A079de Laborderie, J. B119Delibra, G. A189Dell’Era, G. A044Demory, B. A184D’Ercole, M. B143Després, G. A079, A087Desset, J. A044di Mare, L. A186Dickmann, H-P. B015Dietmann, F. A033, B052Dohmen, H.J. C042Dufour, G. A097Dupont, P. A041Dykas, S. B002Eberle, T. B005Ehrenfried, K. A141Engel, K B022Engelmann, D. B067, B140Enghardt, L. A141Facchini, B. B129, B130,
B143, B203Feld, H-J. A007Fernandoy, R. B210Fois, M. B168Franchina, N. B121Frey, T. A185García Rosa, N. A162
Gerhard, T. B131Ghidoni, A. B121Gillespie, D. B161, B170Giovannini, M. B132Gnesin, V. A090Goinis, G. A060Goldhahn, E. B085Gottschall, M. A159Gourdain, N. A147, A157Grigoriev, A.V. B201Grigoriev, E. A179Grübel, M. B005Grönman, A. A033, A065Guendoglu, Y B022Göttlich, R. B039Habing, R.A. A007Harinck, J. C218Harmand, S. B115Heinichen, F. A068, A070,
A110Heitmeir, F. B039Henner, M. A184Hervé, S. A025Hiernauxy, S. A044Hogg, S. B038Hohenstein, S. B126Horváth, C. A029Hoznedl, M. B139Huhnd, M. B085Hämäläinen, J. B011Iakunin, A.I. B201Ingram, G. B038Innocenti, L. B143, B203Jaatinen-Värri, A. A065Kaikko, J. B214Kau, H.-P. A068Keller, C. A109Kernemp, I. B210Kiyak, E. B188Kohlhaas, M. B081Kolodyazhnaya, L. A090Kolotnikov, M. A010Kondratiev, V.F. B201Kortikov, N.N. B201Kosmacheva, A. B011Krähenbuhl, D. B004Kuznechov, N.B. B201Laguna, J.D. A109Lance, M. B104Larjola, J. A205Lavergne, G. A162
21
Lebœf, F. A079, A087, B104
Lecordix, J-L. A162Lefebvre, A. A087Leroy, G. A156Levkov, K. C023Llobet, J.R. C212Luxa, M. B116Mager, A.E. A096Mailach, R. B067, B140Maiuolo, F. B130Makarov, P. A010Manna, M. B111Marconcini, M. B132Maritano, M. B129Marsan, A. A156Martelli, F. B111Mazzei, L. B203McGilvray, M. B161, B170Meinzer, C.E. A113Micio, M. B129Miranda, M. B073Mokaramian, A. B049Moreau, S. B119, B210Mouret, G. A157Mucignat, C. B020Mueller, L. A120Ngo Boum, G. A079, A087Nicke, E. A025, A082Nigro, A. B121Nitsche, W. A047Noskov, V. A179Novokreshchenov, V. A183Ohlendorf, N. B130Orozco Piñeiro, C. B170Ott, P. A066, A136Ottavy, X. A128Panov, V. B098Pardowitz, B. A141Pasquale, D. C218Pastor, G. B223Pavesi, G. A041, B165Pecnik, R. C218Peitsch, D. A141, A152Perfiliev, D. B011Picchi, A. B143Pievaroli, M. B129Pilet, J. A162Pinelli, L. A032Poli, F. A032Polklas, T. B067, B140Poser, R. B017, B168Pugachev, A.O. B054Punnonen, P. B214Raitor, T. A082Rasouli, V. B049Ravelet, F. A091
Ravelli, S. B020, B073Rebay, S. B121Reutter, O. A025, A082Riley, J.C. B161Rispoli, F. A189Rogalev, A.N. A096Rose, M.G. B022Rossetti, A. B165Roumeas, M. A097Rudas, B. B116Ryley, J. B170Rzadkowski, R. A090Röyttä, P. A065Saari, E. A205Šafařík, P. B116Salvadori, S. B111Sans, J. A044Santner, C. B039Santolin, A. B165Savolainen, S. B214Schatz, M. B005Schiffer, H-P. A070, A110Schneider, C.M. B022Schrack, D. B022Schramm, A. B067, B140Schwarz, M.A. B067Schönenborn, H. A136Šejnab, M. B211Selivanov, A. A183Semmler, K. B168Seume, J.R. A109, A113,
B126Shahpar, S. A009Sheard, A.G. A189Šimkad, Z. B211Šimurda, D. B116Sorge, R. A141Soulat, L. B210Spataro, R. B039Stanciu, M. B104Stapelfeldt, S.C. A186Starzmann, J. B005Šťastný, M. B211Staudacher, S. B022Streit, A. A068Streit, J.A. A068, A070Sturm, M. B135Synáč, J. B116, B211Szczepanik, R. A090Tajč, L. B139Tarchi, L. B129, B130,
B143Temis, J. A183Thamsen, P-U. A141Thiele, F. A141Torzo, D. A032Trébinjac, I. A097, A156
Turunen-Saaresti, T. A065Vad, J. A029Waidmann, C. B017, B168van Buijtenen, J. C218Wan, B. C042Wang, J. A091Wang, Z. B223vanRennings, R. A141Wartzek, F. A070Vedeneev, V. A010Vega, A. A224Verstraete, T. A120Wlassowz, F. A147Vogeler, K. A159, B085von Wolfersdorf, J. B017, B168Voß, C. A060Wróblewski, W. B002Yakushev, D. A183Yazar, I. B188Yurchenko, G. A183Zander, V. A047Zangeneh, M. A184Zanker, A. A066Zariankin, A. A096, A179Zwyssig, C. B004
22
Monitoimisali 2. krsSportshall 2nd floor
6325 63233310 3307 3306 3305
4301 4302 4304 4305
2303
2305
4309 43102310
1385 1384 1303 1304 1312 1336 1337 1338 1339 1356
Lääkäriasema 2. krsPersonal HealthcareFirst Aid 2nd floor
1383 1381 1382
Viipuri-saliViipuri Hall
PääsisäänkäyntiMain Entrance
KirjastoLibrary
7343
7339
7337
7334
7332
Opiskelijaterveydenhuolto 1. krsStudent Healthcare First Aid 1st floor
6. rakennusvaihe6th Construction Phase
YlioppilastaloStudent Union Building
1. kerros 1st floor
2. kerros 2nd floor
3. kerros 3rd floor
Yliopiston salit University’s halls
AMK:n salit Saimaa UAS’s halls
4. rakennusvaihe4th Construction Phase
1. rakennusvaihe1st Construction Phase
7. rakennusvaihe7th Construction Phase
3. rakennusvaihe3rd Construction Phase
2. rakennusvaihe2nd Construction Phase
1. rakennusvaihe1st Construction Phase
Skinnar
ilanka
tu
BussipysäkkiBus stop
AsiakaspysäköintiCar Park for Visitors
ParkkipaikatCar Park
1363
3. KERROKSEN SALIT 3RD FLOOR HALLS:
4311
Saimaan ammattikorkeakouluSaimaa University of Applied Sciences
Saimaa AMK:n yhdyskäytäväCorridor Saimaa UAS
Hissit Lifts
MAP OF LAPPEENRANTA UNIVERSITY GREEN CAMPUS
ETC10 Venue
AC B
University Restaurant
Sessions
Viipuri Hall
23
MAP OF LAPPEENRANTA UNIVERSITY GREEN CAMPUS
MAP OF LAPPEENRANTA HOTELS
24