10GbE Ultra-low Latency Switches XG2600
2
High Performance 10GbE Layer 2 Switching Offers industry-leading low latency in 10GbE Switching Delivers up to 520Gbps Available as 26-port SFP+ optical solution in compact 1RU high form factor Flexible airflow (front-to-rear and rear-to-front airflow) Flexible SFP+ interfaces (Copper Twinax, SR and LR) allow you to build the ideal network architecture for your requirements Power consumption under 5 watts per port 10GbE Ultra-low Latency Switches XG2600 Networking Solutions XG 2600 Fujitsu enhances its single chip, highly integrated 10GbE Switch Family with a new 26-port SFP+ Switch Powered by our 4th generation Fujitsu AXEL-X2 ASIC, with as low as 300ns latency
Transcript of 10GbE Ultra-low Latency Switches XG2600
High Performance 10GbE Layer 2 Switching
O�ers industry-leading low latency in 10GbE Switching
Delivers up to 520Gbps
Available as 26-port SFP+ optical solution in compact 1RU high form factor
Flexible airflow (front-to-rear and rear-to-front airflow)
Flexible SFP+ interfaces (Copper Twinax, SR and LR) allow you to build the ideal network architecture for your requirements
Power consumption under 5 watts per port
10GbE Ultra-low Latency Switches XG2600
Networking Solutions
XG 2600
Fujitsu enhances its single chip, highly integrated 10GbE Switch Family with a new 26-port SFP+ Switch
Powered by our 4th generation Fujitsu AXEL-X2 ASIC, with as low as 300ns latency
XG2600 Switches
Fujitsu Frontech North AmericaPrinted in the U.S.A. DS_XG_2600_0311
For more information, call us at 877-766-7545 or visit us at: http://us.fujitsu.com/ethernet Fujitsu Frontech North America, Inc.www.fujitsufrontechna.com25902 Towne Centre Drive, Foothill Ranch, CA. 92610
©2011 Copyright 2011 Fujitsu Frontech North America Inc. All rights reserved. Fujitsu and the Fujitsu logo are registered trademarks. All other trademarks are the property of their respective owners. Statements herein are based on normal operating conditions and are not intended to create any implied warranty
Virtual LANs4000 Port-based or Tag-based VLANProtocol VLAN
Ingress Filtering
Administration Industry standard Command Line Interface with command help and completionHTTP with GUISerial or 10/100 BASE-T Ethernet Telnet sessionFTP serverSYSLOG SNMP (v1/v2/v3)RMON (Alarms, Events)In-band and out-of-band managementSNTPLLDP
Spanning Tree ProtocolSTP/RSTP, MSTP
Link AggregationStatic or LACP
Jumbo Frame Support9KB/12KB/15KB/16KB
Congestion Management
IGMPIGMP Snooping (v1/v2)
Security FeaturesMultiple accounts with class privilegesACL (Layers2-4)
SSH (v2)
RADIUS
Other FeaturesLink aggregation backup portsLLMNRStatic routingProxyDNSL3 monitoring IEEE/Standards Compliance802.3ae 802.3ad Link Aggregation802.1D MAC Bridges - Spanning Tree Protocol (STP, RSTP)802.1D MAC Bridges - Unicast/Multicast forwarding802.1D MAC Bridges - Aging/Learning802.1Q VLAN (virtual LAN)802.1p QoS (8 classes, 8 queues)802.3x Pause Frame Flow Control802.1AB Link Layer Discovery Protocol802.1Q Multiple Spanning Tree ProtocolSFF-8431 Enhanced Small Form Factor (SFP+)
RFC ComplianceRFC768 User Datagram ProtocolRFC791 Internet ProtocolRFC792 Internet Control Message ProtocolRFC793 Transmission Control ProtocolRFC854 RFC959 File Transfer ProtocolRFC1042 IPv4 TransmissionRFC1157 Simple Network Management Protocol (SNMP)RFC1212 RFC1213 MIB-2 SNMP GroupRFC1215 Traps for SNMPRFC1493 Bridges MIBRFC1901 Introduction to Community-based SNMPv2RFC2236 IGMP, v2RFC2674 P-Bridge & Q-Bridge MIBsRFC2819 RMON MIB (Statistics History Group)RFC2863 IF MIBRFC2865 RADIUSRFC3164 BSD Syslog ProtocolRFC3410 Introduction and Applicability Statements for
Internet-Standard Management FrameworkRFC3635 Ethernet-Like MIBRFC4252 SSH Protocol
RoHS EU RoHS compliant (RoHS 6)
Physical Characteristics26 ports, 10GBASE-R SFP+ Ethernet, 300ns chip latency, 520Gbps switching operation1 RJ-45 RS232 console/management port
Dimension (W x D x H)430mm x 600mm x 43.5mm16.9” x 23.6” x 1.7”1 RU high, 19” rack mountableHot pluggable and redundant power supplies and cooling fans
Weight13kg (28lbs)
AC Voltage/Current Requirements 100-240V - 50/60 Hz 1.8-0.85A
Power ConsumptionXG2600 less than 130W
Temperature: 0° to 50° CelsiusHumidity: 15 - 85% RH (non-condensing)
Temperature: 0° to 50° CelsiusHumidity: 8 - 90% RH (non-condensing)
Included Accessories 4-post rack mount kit with fastenersPower cordsHardware/Installation GuideUser Guide (CD)RJ 45 to DB9 serial adapter
Warranty3 year return to factory warranty
Part Number Description
XG2600 26-port SFP+ Optical 10GbE Switch (SFP+ Optics sold separately)
XG2600FAM-OOW-YR1 XG2600 additional one year of warranty (total of 4 years)
XG2600FAM-OOW-YR2 XG2600 additional two years of warranty (total of 5 years)
Accessories
SFPP-SR SR SFP+ Optical Module
SFPP-LR LR SFP+ Optical Module
SFPP-CBL-01 Twinax Cable-1m
SFPP-CBL-02 Twinax Cable-2m
SFPP-CBL-03 Twinax Cable-3m
SFPP-CBL-05 Twinax Cable-5m
SFPP-CBL-07 Twinax Cable-7m
