10.6 Schedule of Accreditationgac.org.sa/uploads/cab_list/att_1/AC_10_6_Schedule_of...Accreditation...
-
Upload
nguyenthien -
Category
Documents
-
view
233 -
download
0
Transcript of 10.6 Schedule of Accreditationgac.org.sa/uploads/cab_list/att_1/AC_10_6_Schedule_of...Accreditation...
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 1 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Certification Body Accreditation No. APC 0038
is accredited by the GCC Accreditation Center (GAC) in accordance with the recognized International Standard ISO/IEC 17065:2012, “Conformity assessment -- Requirements for bodies certifying products, processes and services”
GULFTIC MIQ CERTIFICATION L.L.C.
Issue No: 1 Issue Date: 12 July 2017
Address. Office No. 210, Al Nasr Plaza Building, Oud Metha, Dubai, United Arab Emirates
Contact: Victorino Abejero Tel: +971 50 6107714 Fax: +971 4 272 1612
Email: [email protected] Web Address: www.gulftic.com
Locations where certification activities covered by the above Accreditation Standard are undertaken
1- address: Office No. 210, Al Nasr Plaza Building, Oud Metha, Dubai, United Arab Emirates
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 2 of 40
Date: 5 January 2016
Approved by: Brahim Houla
For the following scope:
Scope:
40 Product Certification 40.02 Certification Product Certification
50.02. Low Voltage Equipment 50.02.01. Full Product Certification
Scope details are as follows:
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
LVE - Household and similar electrical
appliances
Household and similar electrical appliances
Safety - Part 1: General requirements IEC 60335-1:2010+A1:2013; UAE.S IEC 60335-1
Storage water heaters
Safety - Part 2-21: Particular requirements for storage water heaters
IEC 60335-2-21:2012; UAE.S IEC 60335-2-21;
Labeling – Energy Efficiency Label for Electrical Appliances Part 4: Electric Storage Water Heaters
UAE.S 5010-4
Electric irons Safety - Part 2-3: Particular requirements for electric irons
IEC 60335-2-3:2012+A1:2015; UAE.S IEC 60335-2-3
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 3 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Microwave ovens, including combination microwave ovens
Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens
IEC 60335-2-25:2010+A1:2014+ A2:2015; UAE.S IEC 60335-2-25
Spin extractors Safety - Part 2-4: Particular requirements for spin extractors
IEC 60335-2-4:2008+A1:2012 UAE.S IEC 60335-2-4
Washing machines Safety - Part 2-7: Particular requirements for washing machines
IEC 60335-2-7:2008+A1:2011 UAE.S IEC 60335-2-7
Tumble dryers Safety - Part 2-11: Particular requirements for tumble dryers
IEC 60335-2-11:2008+A1:2012+A2:2015 UAE.S IEC 60335-2-11
Washing Machines and Dryers Labeling - Energy efficiency label for electrical appliances Part 2: Washing Machines and Dryers
UAE.S 5010-2
Stationary cooking ranges, hobs, ovens and similar appliances
Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
IEC 60335-2-6:2014; UAE.S IEC 60335-2-6
Refrigerating appliances, ice-cream appliances and ice makers
Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
IEC 60335-2-24:2010+A1:2012 UAE.S IEC 60335-2-24
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 4 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Household Refrigerating Appliances
Labeling - Energy Efficiency Label for Electrical Appliances Part 3: Household Refrigerating Appliances
UAE.S 5010-3
Electrical heat pumps, air-conditioners and dehumidifiers
Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
IEC 60335-2-40:2013 UAE.S IEC 60335-2-40;
Household Air Conditioners Labeling - Energy efficiency label for electrical appliances Part 1: household air conditioners
UAE.S 5010-1
Grills, toasters and similar portable cooking appliances
Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
IEC 60335-2-9:2008+A1:2012 UAE.S IEC 60335-2-9
Deep fat fryers, frying pans and similar appliances
Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances
IEC 60335-2-13:2009 UAE.S IEC 60335-2-13
Kitchen machines Safety - Part 2-14: Particular requirements for kitchen machines
IEC 60335-2-14:2016 UAE.S IEC 60335-2-14
Vacuum cleaners and water-suction cleaning appliances
Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
IEC 60335-2-2:2009+A1:2012; UAE.S IEC 60335-2-2
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 5 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Fans Safety - Part 2-80: Particular requirements for fans
IEC 60335-2-80:2015; UAE.S IEC 60335-2-80
Heating liquids Safety - Part 2-15: Particular requirements for appliances for heating liquids
IEC 60335-2-15:2012; UAE.S IEC 60335-2-15
Walk-behind and hand-held lawn trimmers and lawn edge trimmers
Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
IEC 60335-2-91:2008 UAE.S IEC 60335-2-91
Scissors type grass shears Safety - Part 2-94: Particular requirements for scissors type grass shears
IEC 60335-2-94:2008 UAE.S IEC 60335-2-94
Appliances for skin or hair care Safety - Part 2-23: Particular requirements for appliances for skin or hair care
IEC 60335-2-23:2003+A1:2008+ A2:2012; UAE.S IEC 60335-2-23
Shavers, hair clippers and similar appliances
Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
IEC 60335-2-8:2012+A1:2015 UAE.S IEC 60335-2-8
Dishwashers
Safety Part 2-5: Particular requirements for dishwashers
IEC 60335-2-5:2012; UAE.S IEC 60335-2-5
Labeling – Energy efficiency label for electrical appliances Part 6: Dishwasher
UAE.S 5010-6
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 6 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Food waste disposers Safety - Part 2-16: Particular requirements for food waste disposers
IEC 60335-2-16:2002+A1:2008+ A2:2011; UAE.S IEC 60335-2-16
Appliances for skin exposure to optical radiation
Safety - Part 2-27: Particular requirements for appliances for skin exposure to optical radiation
IEC 60335-2-27:2009+A1:2012+ A2:2015 UAE.S IEC 60335-2-27
Sewing machines Safety - Part 2-28: Particular requirements for sewing machines
IEC 60335-2-28:2002+A1:2008 UAE.S IEC 60335-2-28
Battery chargers Safety - Part 2-29: Particular requirements for battery chargers
IEC 60335-2-29:2016 UAE.S IEC 60335-2-29
Room heaters Safety - Part 2-30: Particular requirements for room heaters
IEC 60335-2-30:2009 UAE.S IEC 60335-2-30
Range hoods and other cooking fume extractors
Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors
IEC 60335-2-31:201 UAE.S IEC 60335-2-31
Massage appliances Safety - Part 2-32: Particular requirements for massage appliances
IEC 60335-2-32:2002+A1:2008+A2:2013 UAE.S IEC 60335-2-32
Instantaneous water heaters Safety - Part 2-35: Particular requirements for instantaneous water heaters
IEC 60335-2-35:2012; UAE.S IEC 60335-2-35
Pumps Safety - Part 2-41: Particular requirements for pumps
IEC 60335-2-41:2012 UAE.S IEC 60335-2-41
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 7 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Clothes dryers and towel rails Safety - Part 2-43: Particular requirements for clothes dryers and towel rails
IEC 60335-2-43:2002+A1:2005+A2:2008 UAE.S IEC 60335-2-43
Ironers Safety - Part 2-44: Particular requirements for ironers
IEC 60335-2-44:2002+A1:2008+A2:2011 UAE.S IEC 60335-2-44
Portable heating tools and similar appliances
Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
IEC 60335-2-45:2002+A1:2008+A2:2011 UAE.S IEC 60335-2-45
Commercial dispensing appliances and vending machines
Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
IEC 60335-2-75:2012+A1:2015 UAE.S IEC 60335-2-75
Appliances for heating liquids Safety - Part 2-15: Particular requirements for appliances for heating liquids
IEC 60335-2-15:2012 UAE.S IEC 60335-2-15
Storage water heaters Safety - Part 2-21: Particular requirements for storage water heaters
IEC 60335-2-21:2012 UAE.S IEC 60335-2-21
Instantaneous water heaters Safety - Part 2-35: Particular requirements for instantaneous water heaters
IEC 60335-2-35:2012 UAE.S IEC 60335-2-35
Stationary circulation pumps for heating and service water installations
Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations
IEC 60335-2-51:2002 UAE.S IEC 60335-2-51
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 8 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Oral hygiene appliances Safety - Part 2-52: Particular requirements for oral hygiene appliances
IEC 60335-2-52:2002+A1:2008 UAE.S IEC 60335-2-52
Electrical appliances use with aquariums and garden ponds
Safety - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds
IEC 60335-2-55:2002+A1:2008 UAE.S IEC 60335-2-55
Projectors and similar appliances
Safety - Part 2-56: Particular requirements for projectors and similar appliances
IEC 60335-2-56:2002+A1:2008+A2:2014 UAE.S 60335-2-56
Insect killers Safety - Part 2-59: Particular requirements for insect killers
IEC 60335-2-59:2002+A1:2006+A2:2009 UAE.S IEC 60335-2-59
Thermal storage room heaters Safety - Part 2-61: Particular requirements for thermal storage room heaters
IEC 60335-2-61:2002+A1:2005 UAE.S IEC 60335-2-61
Commercial electric kitchen machines
Safety - Part 2-64: Particular requirements for commercial electric kitchen machines
IEC 60335-2-64:2002+A1:2007 UAE.S IEC 60335-2-64
Air-cleaning appliances Safety - Part 2-65: Particular requirements for air-cleaning appliances
IEC 60335-2-65:2002+A1:2008+A2:2015 UAE.S IEC 60335-2-65
Portable immersion heaters Safety - Part 2-74: Particular requirements for portable immersion heaters
IEC 60335-2-74:2002+A2:2009 UAE.S 60335-2-74
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 9 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Commercial dispensing appliances and vending machines
Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
IEC 60335-2-75:2012+A1:2015 UAE.S 60335-2-75
Outdoor barbecues Safety - Part 2-78: Particular requirements for outdoor barbecues
IEC 60335-2-78:2002+A1:2008 UAE.S 60335-2-78
High pressure cleaners and steam cleaners
Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners
IEC 60335-2-79:2016 UAE.S IEC 60335-2-79
Fabric steamers Safety - Part 2-85: Particular requirements for fabric steamers
IEC 60335-2-85:2002+A1:2008 UAE.S IEC 60335-2-85
Commercial microwave ovens Safety - Part 2-90: Particular requirements for commercial microwave ovens
IEC 60335-2-90:2015 UAE.S IEC 60335-2-90
Humidifiers Safety - Part 2-98: Particular requirements for Humidifiers
IEC 60335-2-98:2002+A1:2004 UAE.S IEC 60335-2-98
Hand-held mains-operated garden blowers, vacuums and blower vacuums
Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums
IEC 60335-2-100:2002 UAE.S IEC 60335-2-100
Gas, oil and solid-fuel burning appliances having electrical connections
Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
IEC 60335-2-102:2004+A2:2012 UAE.S IEC 60335-2-102
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 10 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Hand-held motor-operated electric tools - Safety
General requirements Safety - Part 1: General requirements IEC 60745-1:2006 UAE.S IEC 60745-1
Drills and impact drills Safety - Part 2-1: Particular requirements for drills and impact drills
IEC 60745-2-1:2003+A1:2008 UAE.S 60745-2-1
Screwdrivers and impact wrenches
Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches
IEC 60745-2-2:2003+A1:2008 UAE.S 60745-2-2
Grinders, polishers and disk-type sanders
Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
IEC 60745-2-3:2006+A1:2010+A2:2012 UAE.S IEC 60745-2-3
Sanders and polishers other than disk type
Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
IEC 60745-2-4:2002+A1:2008 UAE.S IEC 60745-2-4
Circular saws Safety - Part 2-5: Particular requirements for circular saws
IEC 60745-2-5:2010; UAE.S IEC 60745-2-5
Hammers Safety - Part 2-6: Particular requirements for hammers
IEC 60745-2-6:2003+A1:2006 UAE.S 60745-2-6
Spray guns for non-flammable liquids
Safety - Part 2: Particular requirements for spray guns for non-flammable liquids
IEC 60745-2-7:1989 UAE.S IEC 60745-2-7
Shears and Nibblers Safety - Part 2-8: Particular requirements for shears and nibblers
IEC 60745-2-8:2003+A1:2008 UAE.S IEC 60745-2-8
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 11 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Tappers Safety - Part 2-9: Particular requirements for tappers
IEC 60745-2-9:2003+A1:2008 UAE.S IEC 60745-2-9
Reciprocating Saws Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
IEC 60745-2-11:2003+A1:2008 UAE.S IEC 60745-2-11
Concrete vibrators Safety - Part 2-12: Particular requirements for concrete vibrators
IEC 60745-2-12:2003+A1:2008 UAE.S IEC 60745-2-12
Chain Saws Safety - Part 2-13: Particular requirements for chain saws
IEC 60745-2-13:2006+A1:2009 UAE.S IEC 60745-2-13
Planers Safety - Part 2-14: Particular requirements for planers
IEC 60745-2-14:2003+A1:2006+A2:2010 UAE.S IEC 60745-2-14
Hedge Trimmers Safety - Part 2-15: Particular requirements for hedge trimmers
IEC 60745-2-15:2006+A1:2009 UAE.S IEC 60745-2-15
Tackers Safety - Part 2-16: Particular requirements for tackers
IEC 60745-2-16:2008 UAE.S IEC 60745-2-16
Routers and Trimmers Safety - Part 2-17: Particular requirements for routers and trimmers
IEC 60745-2-17:2010 UAE.S IEC 60745-2-17
Strapping Tools Safety - Part 2-18: Particular requirements for strapping tools
IEC 60745-2-18:2003+A1:2008 UAE.S IEC 60745-2-18
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 12 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Jointers Safety - Part 2-19: Particular requirements for jointers
IEC 60745-2-19:2005+A1:2010 UAE.S IEC 60745-2-19
Band Saws Safety - Part 2-20: Particular requirements for band saws
IEC 60745-2-20:2003+A1:2008 UAE.S IEC 60745-2-20
Drain Cleaners Safety - Part 2-21: Particular requirements for drain cleaners
IEC 60745-2-21:2002+A1:2008 UAE.S IEC 60745-2-21
Plugs and socket-outlets for household and similar purposes
General requirements Part 1: General requirements IEC 60884-1:2002+A1:2006+A2:2013 UAE.S IEC 60884-1
Socket-outlets for appliances Part 2-2: Particular requirements for socket-outlets for appliances
IEC 60884-2-2:2006 UAE.S IEC 60884-2-2
Switched socket-outlets without interlock for fixed installations
Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations
IEC 60884-2-3:2006 UAE.S IEC 60884-2-3
Plugs and socket-outlets for SELV
Part 2-4: Particular requirements for plugs and socket-outlets for SELV
IEC 60884-2-4:2007; UAE.S IEC 60884-2-4
Adaptors Part 2: Particular requirements for adaptors IEC 60884-2-5:1995; UAE.S IEC 60884-2-5
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 13 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Switched socket-outlets with interlock for fixed electrical installations
Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrical installations
IEC 60884-2-6:1997 UAE.S IEC 60884-2-6
Cord Extension sets Part 2-7: Particular requirements for cord extension sets
IEC 60884-2-7:2011+A1:2013 UAE.S IEC 60884-2-7
Switches for household and
similar fixed electrical
installation
General requirements Part 1: General requirements IEC 60669-1:1998+A1:1999+A2:2006 UAE.S IEC 60669-1
Electronic switches Part 2-1: Particular requirements - Electronic switches
IEC 60669-2-1:2002+A1:2008 UAE.S IEC 60669-2-1
Electromagnetic remote-control switches (RCS
Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)
IEC 60669-2-2:2006 UAE.S IEC 60669-2-2
Time-delay switches (TDS) Part 2-3: Particular requirements - Time-delay switches (TDS)
IEC 60669-2-3:2006 UAE.S IEC 60669-2-3
Isolating switches Part 2-4: Particular requirements - Isolating switches
IEC 60669-2-4:2004 UAE.S IEC 60669-2-4
Exterior and interior signs and luminaires
Part 2-6: Particular requirements - Fireman's switches for exterior and interior signs and luminaires
IEC 60669-2-6:2012 UAE.S IEC 60669-2-6
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 14 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Safety of laser products
Part 1: Equipment classification and requirements
Part 1: Equipment classification and requirements IEC 60825-1:2014 UAE.S GSO IEC 60825-1
Laser displays and shows Part3 :Guidance for laser displays and shows IEC TR 60825-3:2008; GSO IEC 60825-3:2012; UAE.S GSO IEC 60825-3
Laser guards Part 4: Laser guards IEC 60825-4:2006+A1:2008+A2:2011 UAE.S GSO IEC 60825-4
Laser beams on humans Part 8 : Guidelines for the safe use of laser beams on humans
IEC TR 60825-8:2006; GSO IEC 60825-8:2012; UAE.S GSO IEC 60825-8
Lamp Control Gear
General and safety requirements
Part 1: General and safety requirements IEC 61347-1:2015; UAE.S IEC 61347-1
Starting devices Part 2-1: Particular requirements for starting devices (other than glow starters)
IEC 61347-2-1:2000+A1:2005+ A2:2013; UAE.S IEC 61347-2-1
D.C or A.C supplied electronic step-down convertors for filament lamps
Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
IEC 61347-2-2:2011 UAE.S IEC 61347-2-2
A.C and/or D.C supplied electronic control gear for fluorescent lamps
Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
IEC 61347-2-3:2011+A1:2016 UAE.S IEC 61347-2-3
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 15 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
D.C supplied electronic ballasts for general lighting
Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting
UAE.S IEC 61347-2-4
Battery supplied electronic control gear for emergency lighting (self-contained)
Part 2-7: Particular requirements for battery supplied electronic control gear for emergency lighting (self-contained)
IEC 61347-2-7:2011 UAE.S IEC 61347-2-7
Ballasts for fluorescent lamps Part 2-8: Particular requirements for ballasts for fluorescent lamps
IEC 61347-2-8:2000+A1:2006 UAE.S IEC 61347-2-8
Electromagnetic control gear for discharge lamps (excluding fluorescent lamps)
Part 2-9: Particular requirements for electromagnetic control gear for discharge lamps (excluding fluorescent lamps)
IEC 61347-2-9:2012 UAE.S IEC 61347-2-9
Electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)
Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)
IEC 61347-2-10:2000+A1:2008 UAE.S IEC 61347-2-10
Miscellaneous electronic circuits used with luminaires
Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
IEC 61347-2-11:2001 UAE.S IEC 61347-2-11
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 16 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
D.C. or A.C. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
IEC 61347-2-12:2005+A1:2010 UAE.S IEC 61347-2-12
D.C or A.C. supplied electronic control gear for LED module
Part 2-13: Particular requirements for d.c. or a.c. supplied electronic control gear for LED modules
IEC 61347-2-13:2014 UAE.S IEC 61347-2-13
Audio, video Products
Audio, video and similar electronic apparatus
Safety requirements IEC 60065:2014/COR2:2016 UAE.S IEC 60065
Lighting Products
Tungsten filament lamps for domestic and similar general lighting purposes
Performance requirements IEC 60064:1993; UAE.S IEC 60064
Double-capped fluorescent lamps
Performance specifications IEC 60081:1997; UAE. S IEC 60081
Fluorescent lamps Glow-starters for fluorescent lamps IEC 60155:1963; UAE.S IEC 60155
Low-pressure sodium vapour lamps
Performance specifications IEC 60192:2001; UAE.S IEC 60192
Tungsten halogen lamps (non-vehicle)
Performance specifications IEC 60357:2002/A3:2011; UAE.S IEC 60357
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 17 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Lamp cap temperature rise Standard method of measurement of lamp cap temperature rise
IEC 60360:1998/COR1:1999 UAE.S IEC 60360
Incandescent lamps - Safety specifications
Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
IEC 60432-1:1999+A1:2005+A2:2011 UAE.S IEC 60432-1
Incandescent lamps - Safety specifications
Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes
IEC 60432-2:1999+A1:2005+A2:2012 UAE.S IEC 60432-2
Incandescent lamps - Safety specifications
Part 3: Tungsten halogen lamps (non-vehicle) IEC 60432-3:2012; UAE.S IEC 60432-3
Incandescent lamps Maximum lamp outlines for incandescent lamps IEC 60630:1994+A7:2014 UAE.S IEC 60630
Luminaires Heat test source (H.T.S.) lamps for carrying out heating tests on luminaires
IEC 60634:1993; UAE.S IEC 60634
High-pressure sodium vapour lamps
Performance specifications IEC 60662:2011; UAE.S IEC 60662
Quartz-tungsten-halogen lamps Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps
IEC 60682:1980/A2:1997 UAE.S IEC 60682
Starterless tubular fluorescent lamps
Pre-heat requirements for starterless tubular fluorescent lamps
IEC TR 60882:1986; UAE.S IEC TR 60882
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 18 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Lamps Glass bulb designation system for lamps IEC TR 60887:2010; UAE.S IEC TR 60887
Single-capped fluorescent lamps
Single-capped fluorescent lamps - Performance specifications
IEC 60901:1996+A1:1997+A2:2000 UAE.S IEC 60901
Self-ballasted fluorescent lamps for general lighting services
Safety requirements IEC 60968:2015; UAE.S IEC 60968
Self-ballasted compact fluorescent lamps for general lighting services
Performance requirements IEC 60969:2016; UAE.S IEC 60969
New lighting products Classification and interpretation of new lighting products
IEC TR 60972:1989 UAE.S IEC TR 60972
Maximum lamp outlines Procedure for use in the preparation of maximum lamp outlines
IEC 61126:1992/AMD2:2005 UAE.S IEC 61126
High pressure xenon short arc lamps
Dimensional, electrical and photometric data and cap types
IEC TR 61127:1992 UAE.S IEC TR 61127
Metal halide lamps Performance specification IEC 61167:2015; UAE.S IEC 61167
Double-capped fluorescent lamps
Safety specifications IEC 61195:1999+A1:2012+A2:2014 UAE.S IEC 61195
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 19 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Single-capped fluorescent lamps
Safety specifications IEC 61199:2011/A2:2014 UAE.S IEC 61199
International lamp coding system
International lamp coding system (ILCOS) IEC 61231:2010+A1:2013; UAE.S IEC 61231
Reflector Lamps Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
IEC TR 61341:2010; UAE.S IEC TR 61341
Miscellaneous lamps Miscellaneous lamps IEC 61549:2003/A3:2012 UAE.S IEC 61549
LED modules for general lighting
Safety specifications IEC 62031:2008+A1:2012+A2:2014 UAE.S IEC 62031
Discharge lamps (excluding fluorescent lamps)
Safety specifications IEC 62035:2014/A1:2016 UAE.SIEC 62035
Lamps and lamp systems Photobiological safety of lamps and lamp systems IEC 62471:2006; UAE.S IEC 62471
General lighting Light emitting diode (LED) products and related equipment - Terms and definitions
IEC 62504:2014; UAE.S IEC 62504
Fluorescent induction lamps Safety specifications IEC 62532:2011+A1:2016 UAE.S IEC 62532
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 20 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Mercury level in fluorescent lamps
Sample preparation for measurement of mercury level in fluorescent lamps
IEC 62554:2011 UAE.S IEC 62554
General lighting services by voltage > 50 V
Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications
IEC 62560:2011+A1:2015 UAE.S IEC 62560
Self-ballasted LED lamps Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements
IEC 62612:2013 UAE.S IEC 62612
Fluorescent induction lamps Performance specification IEC 62639:2012; UAE.S IEC 62639
Non-ballasted LED lamps Safety requirements UAE.S IEC 62663-1
Non-ballasted LED lamps Performance Requirements. UAE.S IEC 62663-2
LED-Binning Part 1: General requirements and white colour grid
IEC 62707-1:2013; UAE.S IEC 62707-1
Colour rendering and correlated colour temperature
Three-digit code for designation of colour rendering and correlated colour temperature
IEC TR 62732:2012 UAE.S IEC TR 62732
Unified fluorescent lamp Dimming standard calculations IEC TR 62750:2012; UAE.S IEC TR 62750
Double-capped LED lamps Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications
IEC 62776:2014/COR1:2015 UAE.S IEC 62776
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 21 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Assessment of blue light hazard to light sources and luminaires
Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires
IEC TR 62778:2014 UAE.S IEC TR 62778
Ballasts for tubular fluorescent lamps
Performance requirements IEC 60921:2004; UAE.S IEC 60921
Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps)
Performance requirements IEC 60923:2005+A1:2006 UAE.S IEC 60923
Auxiliaries for lamps Starting devices (other than glow starters) - Performance requirements
IEC 60927:2007+A1:2013 UAE.S IEC 60927:2007+A1:2013
AC and/or DC- Supplied electronic control gear for tubular fluorescent lamps Performance requirements
IEC 60929:2011+A1:2015; UAE.S IEC 60929
DC or AC Supplied electronic step-down convertors for filament lamps Performance requirements
IEC 61047:2004 UAE.S IEC 61047
Auxiliaries for lamps Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements
IEC 61048:2006/A1:2015 UAE.S IEC 61048
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 22 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Capacitors for use in tubular fluorescent and other discharge lamp circuits
Performance requirements IEC 61049:1991 UAE.S IEC 61049:1991
Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers).
General and safety requirements IEC 61050:1991/A1:1994 UAE.S IEC 61050
DC or AC supplied electronic control gear for LED modules
Performance requirements IEC 62384:2006+A1:2009 UAE.S IEC 62384
Energy performance of lamp control gear
Part 1: Control gear for fluorescent lamps -Method of measurement to determine the total input power of control gear circuits and the efficiency of the control gear
IEC 62442-1:2011 UAE.S IEC 62442-1
Energy performance of lamp control gear
Part 2: Control gear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the control gear
IEC 62442-2:2014 UAE.S IEC 62442-2
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 23 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Energy performance of lamp control gear
Part 3: Control gear for halogen lamps and LED modules - Method of measurement to determine the efficiency of the control gear
IEC 62442-3:2014 UAE.S IEC 62442-3
Equipment for general lighting purposes
EMC immunity requirements IEC 61547:2009 UAE.S IEC 61547
Miscellaneous lampholders Part 2-2: Particular requirements - Connectors for LED-modules
IEC 60838-2-2:2006+A1:2012 UAE.S IEC 60838-2-2
Lamp caps Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:2005 IEC 60061-1:1969/A55:2016 UAE.S IEC 60061-1
Lampholders Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/A51:2016 UAE.S IEC 60061-2
Gauges Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/A51:2015 UAE.S IEC 60061-3
Digital addressable lighting interface
Part 101: General requirements - System components
IEC 62386-101:2014 UAE.S IEC 62386-101
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 24 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Digital addressable lighting interface Control gear
Part 102: General requirements - Control gear IEC 62386-102:2014 UAE.S IEC 62386-102
Digital addressable lighting interface Control gear - LED modules
Part 207: Particular requirements for control gear - LED modules (device type 6)
IEC 62386-207:2009 UAE.S IEC 62386-207
Electromagnetic compatibility (EMC) Limits for harmonic current emissions (equipment input current ≤ 16 A per phase
Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
IEC 61000-3-2:2014 UAE.S IEC 61000-3-2
Electromagnetic fields Assessment of lighting equipment related to human exposure to electromagnetic fields
IEC 62493:2015 UAE.S IEC 62493
Luminaires Part 1: General requirements and tests IEC 60598-1:2014; UAE.S IEC 60598-1
Fixed general purpose luminaires
Luminaires. Part 2: Particular requirements. Section One: Fixed general purpose luminaires
IEC 60598-2-1:1979 UAE.S IEC 60598-2-1
Luminaire performance Part 1: General requirements IEC 62722-1:2014; UAE.S IEC 62722-1
LED Luminaire performance Part 2-1: Particular requirements for LED luminaires
IEC 62722-2-1:2014 UAE.S IEC 62722-2-1
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 25 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Circuit-breakers
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations
Part 1: Circuit-breakers for a.c. operation IEC 60898-1:2015 UAE.S IEC 60898-1
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations
Part 2: Circuit-breakers for AC and DC operation IEC 60898-2:2016 UAE.S IEC 60898-2
Conduits Electrical installations and threads for conduits and fittings
Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings
IEC 60423:2007 UAE.S IEC 60423
Sound signaling devices
Sound signaling devices for household and similar purposes
Sound signaling devices for household and similar purposes
IEC 62080:2001/A2:2015 UAE.S IEC 62080
Electric Toys Electric Toys Electric toys - Safety IEC 62115:2003; UAE.S IEC 62115
AC and DC Low Voltage Wires and Cables
Single core non-sheathed cables with thermoplastic PVC insulation
Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U). Cables for general applications. Single core non-sheathed cables with thermoplastic PVC insulation
BS EN 50525-2-31:2011 UAE.S EN 50525-2-31
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 26 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke
Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U). Cables with special fire performance. Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke
BS EN 50525-3-41:2011 UAE.S EN 50525-3-41
Flexible cables with thermoplastic PVC insulation
Low voltage energy cables of rated voltages up to and including 450/750V (U0/U). Cables for general applications. Flexible cables with thermoplastic PVC insulation
BS EN 50525-2-11:2011 UAE.S EN 50525-2-11
Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U).
Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U). General requirements
BS EN 50525-1:2011 UAE.S BS EN 50525-1
Flexible cables with crosslinked elastomeric insulation
Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U). Cables for general applications. Flexible cables with crosslinked elastomeric insulation
BS EN 50525-2-21:2011 UAE.S EN 50525-2-21
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 27 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Oil resistant control cables with thermoplastic PVC insulation
Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U). Cables for general applications. Oil resistant control cables with thermoplastic PVC insulation
BS EN 50525-2-51:2011 UAE.S EN 50525-2-51
Flexible cables with halogen-free crosslinked insulation, and low emission of smoke
Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U). Cables with special fire performance. Flexible cables with halogen-free crosslinked insulation, and low emission of smoke
BS EN 50525-3-21:2011 UAE.S EN 50525-3-21
Multicore cables with crosslinked silicone rubber insulation
Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U). Cables for general applications. Multicore cables with crosslinked silicone rubber insulation
BS EN 50525-2-83:2011 UAE.S EN 50525-2-83
Armoured cables Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire.
BS 6724:2016 UAE.S BS 6724
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 28 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Voltages up to and including 300/500 V, for electric power and lighting
PVC insulated and PVC sheathed cables for voltages up to and including 300/500 V, for electric power and lighting
BS 6004:2012 UAE .S BS 6004
Electric power and lighting and having low emission of smoke and corrosive gases when affected by fire
Thermosetting insulated and thermoplastic sheathed cables for voltages up to and including 450/750 V for electric power and lighting and having low emission of smoke and corrosive gases when affected by fire
BS 7211:2012 UAE.S BS 7211
Rubber insulated cables - Rated voltages up to and including 450/750 V
Part 1: General requirements IEC 60245-1:2003+A1:2007 GSO IEC 60245-1:2010; UAE.S IEC 60245
Power cables with extruded insulation and their accessories
Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
IEC 60502-1:2004+AMD1:2009 UAE.S IEC 60502-1
Fixed wiring in ships and on mobile and fixed offshore units
Specification for elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units
BS 6883:1991 UAE.S BS 6883
Single core PVC insulated flexible cables
Single core PVC insulated flexible cables of rated voltage 600/1000 V for switchgear and control gear wiring
BS 6231:2006 UAE.S BS 6231
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 29 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Insulated flexible cables and cords for coil leads
Specification for insulated flexible cables and cords for coil leads
BS 6195:1969 UAE.S BS 6195
Thermosetting insulated, armoured cables
Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V for fixed installations. Specification
BS 5467:2016 UAE.S BS 5467
Thermosetting insulated, non-armoured cables
Thermosetting insulated, non-armoured cables with a voltage of 600/1 000 V, for fixed installations
BS 7889:2012 UAE.S BS 7889
Thermosetting insulated, armoured, fire-resistant cables
Thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1 000 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire. Specification
BS 7846:2015 UAE.S BS 7846
Elastomer insulated fire resistant (limited circuit integrity) cables
Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods
BS 7917:1999 UAE.S BS 7917
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 30 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Fire resistant screened cables having low emission of smoke and corrosive gases
Electric cables. Specification for 300/500 V fire resistant screened cables having low emission of smoke and corrosive gases when affected by fire. Multicore and multipair cables
BS 7629-1:2008 UAE.S BS 7629
Cable reels for household and similar purposes
Electrical accessories - Cable reels for household and similar purposes
IEC 61242:1995/A1:2008 UAE.S IEC 61242
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
IEC 60227-1:2007 UAE.S IEC 60227
Power track Systems Part 1: General requirements IEC 61534-1:2011/A1:2014 UAE.S IEC 61534-1
Gas Powered Ovens & Cooking Ranges
Domestic cookers for use with liquefied Petroleum gases
Requirements for domestic cookers for use with liquefied petroleum gases
GSO 1050:2000 UAE.S 1050
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 31 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Commercial and Central Air Conditioning System
Commercial and central Air conditioners
Labeling - Energy efficiency label for electrical appliances - Part five: commercial and central Air conditioners
UAE.S 5010-5
Diesel (Gas Oil)
Diesel (Gas Oil) Gulf Guide of Standard Specifications for Diesel(Gas Oil)
GSO 477:2011 UAE.S GSO 477
Lubricating Oils
Lubricating Oils Lubricating Oils for Internal Combustion Engines API Classifications
GSO 1785:2013 UAE.S GSO 1785
Energy drinks Energy drinks Requirements for handling non-alcoholic formulated caffeinated beverages
FDS 1926:2015 UAE.S 1926
Bottled Drinking Water
Bottled Drinking Water Requirements bottled drinking water fit for human consumption
GSO 1025:2009 UAE.S GSO 1025
Bottled natural mineral water Requirements bottled natural mineral water offered for sale as food product
GSO 987: 2013 UAE.S GSO 987:2013
Ice for human consumption Requirements on manufacturing of ice for human consumption.
GSO 384:1994 UAE.S GSO 384:1994
Perfumes Cosmetic products Cosmetic Products safety requirements GSO 1943 :2016; UAE.S GSO 1943
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 32 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Cosmetics - Packaging and labelling
Requirements for packaging and labelling of all cosmetic products
ISO 22715:2006 UAE.S GSO ISO 22715:2008
Quantity of Product in Prepackages
Legal metrology requirements for prepackaged also called prepackaged commodities
GSO OIML R 87:2007 UAE.S GSO OIML R 87 3
Glass containers used for cosmetics
Glass containers used for cosmetics. GSO 2093 :2011; UAE.S GSO 2093
Detergent Synthetic liquid detergents for Clothing and fabrics
Requirement of synthetic liquid detergents which containing active substances for used in laundering of clothing and fabrics of all types of washing machines and regular hand washing.
GSO 2059:2010 UAE.S GSO 2059
Coloured textiles detergent Requirements for Chlor or its derivatives free coloured textiles detergent which acts by the effect of active atomic oxygen generated from hydrogen peroxide
GSO 2077:2010 UAE.S GSO 2077
Synthetic Detergents -Detergents Powder
Requirements for household synthetic detergent powders
GSO 151 :2007 UAE.S GSO 151
Synthetic Detergents for Kitchen
Requirements for synthetic detergents for kitchen GSO 1946:2010 UAE.S GSO 1946
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 33 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Sodium Bicarbonate Sodium bicarbonate used in various washing and cleaning processes, with or without use of soap as conditions demand, and where a mildly alkaline material is desired.
GSO 1110 :2002 UAE.S GSO 1110
Liquid Chlorine Requirements for liquid chlorine for industrial purposes.
GSO 528 :1994 UAE.S GSO 528
Liquid Glass Cleaner Requirements for Liquid glass cleaner ready for use for cleaning and polishing glass surfaces.
GSO 884 :1997; UAE.S GSO 884
Liquid carpet shampoos General requirements and test methods for carpet shampoos
GSO 461:1994; UAE.S GSO 461
Soap Flakes Requirements for Soap flakes intended for domestic purposes.
GSO 877:1997; UAE.S GSO 877
Cosmetics and Personal Care Products
Cosmetics and Personal Care Products
General safety requirements and parameters as well as labeling and packaging requirements for cosmetics and personal care products.
GSO 1943:2016 UAE S. GSO 1943
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 34 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Cosmetics -Packaging And Labelling
Requirements for packaging and labelling of all cosmetic products as defined according to national regulations or practices intended for sale or free distribution.
GSO ISO 22715:2008 UAE.S GSO ISO 22715
Food Contact Materials
Breast milk substitutes Requirements to be fulfilled in breast-milk substitutes.
GSO 223:2013 UAE.S GSO 223
Food packages Part 2: Plastic package - General requirements GSO 1863 :2013; UAE.S GSO 1863
Fresh fruits and vegetables boxes
General requirements for fresh fruits and vegetables packing boxes made from wood, carton or plastic
GSO 124:1990 UAE.S GSO 124
Tableware made from melamine plastics
Requirements for melamine tableware such as cups, glasses and plates of various types.
GSO 142:2010 UAE.S GSO 142
Wrapping Paper And Paper Bags
General requirements for: 1.1 Kraft paper used for wrapping and packaging and in the manufacture of bags and similar articles; 1.2 Paper bags used for packing foodstuffs and other products.
GSO 458:1994 UAE.S GSO 458
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 35 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Single - use rigid and semi - rigid plastic cups and containers for packaging beverages, Milk products, and allied purposes
General requirements for single - use rigid and semi-rigid plastic cups, containers and closures for packaging beverages, milk products, and allied purposes
GSO 462:1994 UAE.S GSO 462
Milk paperboard containers Disposable pasteurized milk containers which are manufactured from two sided polyethylene coated paperboard blanks or rolls.
GSO 1102:2002 UAE.S GSO 1102
Polyethylene bags for food packaging applications
Polyethylene bags to be used for food packaging applications
GSO 1193:2002 UAE.S GSO 1193
Three Piece Steel Round Cans Used For Canning Food Stuffs
Three piece round steel cans (tin coated or tin free steel) used for canning food stuffs.
GSO 1791:2007 UAE.S GSO 1791
The Two Pieces Aluminum round cans used for canning food (beverages & stuffs)
Hermetically sealed round Aluminum two pieces cans used for canning beverages and stuffs.
GSO 1793:2007 UAE.S GSO 1793
The Two-Pieces Steel Round and Used For Canning Food-Stuffs
Two-piece steel round cans used for canning foodstuffs
GSO 1794:2007 UAE.S GSO 1794
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 36 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Cook ware made from thermal glass
Requirements for cook ware made from thermal glass.
GSO 2075:2010 UAE.S GSO 2075
Cold Formed Aluminum Household Utensils
Cold formed aluminum utensils for household use but does not include pressure cookers.
GSO 1008:1998 UAE.S GSO 1008
Tea and Herbs bags Different types of tea bags (black-green flavored) and with different herbs bags.
GSO 2138:2011 UAE.S GSO 2138
Domestic cookware coating materials
Requirements for domestic cookware materials for use on top of a stove, cooker or hob
GSO 2014:2010 UAE.S GSO 2014
Non-Returnable Glass Bottles For Carbonated Beverage
Non-returnable glass bottles manufactured from soda-lime-silica glass with nominal capacity of up to and including one litre, intended for use in the packaging of carbonated beverages.
GSO 1024:2000 UAE.S GSO 1024
Cookware - Domestic cookware for use on top of a stove, cooker or hob
Part 2: Further general requirements and specific requirements for ceramic, glass and glass ceramic cookware
GSO CEN/TS 12983-2:2012 UAE.S GSO EN TS 12983-2
Ceramic cookware in contact with food
Release of lead and cadmium -- Part 2: Permissible limits
ISO 8391-2:1986; GSO ISO 8391-2:2013 UAE.S GSO ISO 8391-2
Cosmetics -- Packaging and labelling
Requirements for packaging and labelling of all cosmetic products
GSO ISO 22715:2008 UAE.S GSO ISO 22715
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 37 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Glass hollowware in contact with food
Release of lead and cadmium -- Part 2: Permissible limits
GSO ISO 7086-2:2013 UAE.S GSO ISO 7086-2
Ceramic ware in contact with food
Release of lead and cadmium Part 2: Permissible limits
GSO ISO 6486-2:1981 UAE.S GSO ISO 6486-2
Materials and articles in contact with foodstuffs
Insulated containers for domestic use. Specification for insulated bags and boxes
GSO EN 12546-2:2013 UAE.S GSO EN 12546-2
Water Fixture Vitreous china plumbing fixtures and hydraulic requirements for water closets and urinals
Requirements for materials, construction, performance, testing, and markings.
ASME A112.19.2003 ANSI Z124.4-2006 ASME A112.19.3-2017/CSA B45.4-17 ASME A112.19.2/CSA B45.1 - 2013
Hydraulic Performance Requirements for Water Closets and Urinals
Sanitary performance requirements and test procedures for water closets and urinals discharging into gravity waste systems in permanent buildings and structures
ASME A112.19.6 - 1995
Water Closet Tanks Water Closet Tanks ANSI Z124.4-2006; ASME A112.19.2003; A112.19.3/CSA B45.4 - 2008
Electro Hydraulic Water Closet Electro Hydraulic Water Closet A112.19.2-2013/CSA B45.1-13
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 38 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Ceramic plumbing fixtures - Vitreous and non-vitreous china plumbing fixtures, including all types of water closets, lavatories, urinals, bidets, bathtubs, shower receptors, kitchen and bar sinks, service sinks, drinking fountains and institutional application fixtures
Requirements for materials, construction, performance, testing, and markings.
ASME A112.19.2/ CSA B45.1-2013
Vitreous China Nonwater Urinals
Requirements and test methods pertaining to materials, significant dimensions, and functional performance for vitreous china nonwater urinals. The sanitary performance requirements and test procedures apply to all types of nonwater urinals
A112.19.19 - 2016 ASME A112.19.19-2006
Plumbing Supply Fittings Plumbing supply fittings and accessories located between the supply stop and the terminal fitting.
ASME A112.18.1-2012/CSA B125.1-12
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 39 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Sanitary tapware. Thermostatic mixing valves (PN 10).
General technical specification BS EN 1111:1999
Sanitary tapware. Shower hoses for sanitary tapware for water supply systems of type 1 and type 2
General technical specification BS EN 1113:2008+A1:2011 BS EN 1112:2008
Sanitary tapware- Mechanical mixing valves (PN 10)
General technical specifications BS EN 817:2008
Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow
General requirements of devices to prevent pollution by backflow
BS EN 1717:2000
Plastic plumbing fixtures Requirements for materials, construction, performance, testing, and markings.
CSA B45.5-2017/IAPMO Z124-2017
Stainless Steel Plumbing Fixtures
Requirements for materials, construction, performance, testing, and markings.
ASME A112.19.3/CSA B45.4-2008
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 1/ Issue Date: 12 July 2017 Accreditation Manager: Aisha Fallatah
ACCREDITED
PRODUCT CERTIFICATION ISO/IEC 17065:2012
No. APC 0038
Version: 2 Page 40 of 40
Date: 5 January 2016
Approved by: Brahim Houla
Product Category
Items, Materials or Products Specific Tests or Properties Measured Specification, Standard Method or Technique Used
Sanitary tapware. Shower hoses for sanitary tapware for water supply systems of type 1 and type 2.
General technical specification BS EN 1113:2015
Sanitary tapware - Single taps and combination taps for water supply systems of Type 1 and Type 2
General Technical Specification BS EN 200:2008
END
GULFTIC IMQ CERTIFICATION L.L.C. recorded as issuing GAC accredited certificates to organizations in the countries listed below. This list is current at the time of issue of this schedule.
United Arab Emirates Bahrain Saudi Arabia Oman Qatar Kuwait Yemen