1050 Motor[1]
-
Upload
pinaki-sharma -
Category
Documents
-
view
216 -
download
0
Transcript of 1050 Motor[1]
-
8/8/2019 1050 Motor[1]
1/3
SPECIFICATION NUMBER
DATA SHEET FOR 4935-30001-21-EL-DS-1050
HV MOTOR
Rev : 01
CLIENT: INDIAN OIL CORPORATION LTD., PANIPAT SHEET NO. 1 OF 3
SECTION 1 MOTOR DATA- (By Purchaser)
Quantity ---
Motor Tag No. ---
Voltage (V) 6.6kV + 6 %
Phase 3
Frequency (Hz) 50Hz + 3%
System Fault Level (kA) 25kA
System Earthing Resistance Grounded
Type of Motor Squirrel Cage
Duty Continuous
Location Outdoor
Type of HV terminal box Separate, Phase segregated
Method of starting DOL
Insulation Class Class F with temperature rise limited to class B
Starting Current 450% of full load current (including +ve tolerance)in case fed from DG set and 550% of full loadcurrent (including +ve tolerance) in case fed fromGrid.
Bearing temperature indicator Required
Anti condensation Heaters Required
SECTION 2 LOAD DATA (By Driven Equipment Manufacturer)
Motor Mounting
Type of Load
Suggested Motor Rating in kW
Absorbed kW at Motor Coupling kW at RPM
REVISION NO. 0 01
ISSUED FOR ENQUIRY ENQUIRY
PREPD. BY/DATE UAM/25-03-03 UAM/04-04-03
CHKD. BY/DATE ARA/25-03-03 ARA/04-04-03
APPD.. BY/DATE JAS/25-03-03 JAS/04-04-03
0
1
-
8/8/2019 1050 Motor[1]
2/3
SPECIFICATION NUMBER
DATA SHEET FOR 4935-30001-21-EL-DS-1050
HV MOTOR
Rev : 01
CLIENT: INDIAN OIL CORPORATION LTD., PANIPAT SHEET NO. 2 OF 3
GD2 referred to Motor Shaft for
i) Machine Kg m2
ii) Gearbox Kg m2
iii) Flywheel Kg m2
Speed Torque Curve Ref.
Type of Coupling
Coupling Arrangement in Relation to Shaft
i) Is Driven Equipment SeparatelyLocated?
ii) End Float of Driven Shaft
iii) Radial Load Imposed
iv) End Thrust Imposed
Slide Rails Required
Shaft kW and kW at end of curve
Direction of rotation from Coupling End
Starting/Max Torque required(mkg)
WK2 of equipment Including/excludingflywheel(kgm2)
Thrust up/down(kg)
SECTION 3 MOTOR DATA (BY MANUFACTURER)
1. Manufacturer
2. kW Rating
3. No of poles
4. Frame designation
5. Full Load current(A)
6. Full Load speed (rpm)
7. Full load torque
8. Starting torque
9. Pull out torque
10. Starting current at 100% Voltage (A)
-
8/8/2019 1050 Motor[1]
3/3
SPECIFICATION NUMBER
DATA SHEET FOR 4935-30001-21-EL-DS-1050
HV MOTOR
Rev : 01
CLIENT: INDIAN OIL CORPORATION LTD., PANIPAT SHEET NO. 3 OF 3
11. Rotation viewed from coupling end
12. Starting time (sec)At 80% Voltage
-
13. Starting time (sec)At 100 % Voltage
-
14. Locked rotor with standtime (cold/hot) secAt 80 % Voltage
-
15. Locked rotor with standtime (cold/hot) sec
At 100 % Voltage
-
16. Time (Te) for increased safety motors at100% voltage
17. WK2 of motor (kgm2)
18. Power factor at 100% load -
19. Power factor at 75% Load -
20. Efficiency at 100% load -
21. Efficiency at 75% Load -22. Space heater watts/volts - -
23. Terminal box type -
24. No. of terminals -
25. Type of RTD & BTD
(For Motors above 1000 kW)
-
26. No. of RTDs and BTDsprovided (For Motors above
1000 kW)
-
27. Heating time constant (min) -
28. Cooling time constant (min) -
29. Bearing type/no. DE -
30. Bearing type/no. NDE -
31. Lubrication type
32. Weight of motor (kg)(motor/stator/rotor)
0
1
0
1
0
1