105 Gear Drive - Shaft Output - GS Global Resources · Consult your Eskridge representative to...
Transcript of 105 Gear Drive - Shaft Output - GS Global Resources · Consult your Eskridge representative to...
105 Gear Drive - Shaft OutputTypical Applications: Industrial, Marine or Mobile Equipment
(913) 782-1238 (Tel)(913) 782-4206 (Fax)
[email protected]: PS105_0509
Performance RatingsMaximum Intermittent Output Torque ................................. 100,000 in-lb (11,300 N-m)Continuous Output Torque .................................................. 30,000 in-lb (3,390 N-m)Peak Torque Rating............................................................. Consult Eskridge Maximum Input Speed (No Load)........................................ 3,000 RPMConsult your Eskridge representative to determine ratings for your specific application or configuration.
General Dimensions for Rectangular Gear Drive Mounting (ordering option 'E')Other options may be available. See ordering information on last page or contact your Eskridge representative for more details.Values are shown as “inches (millimeters)." Please see page 2 for Dimension A specifications.
105 Gear Drive - Shaft OutputTypical Applications: Industrial, Marine or Mobile Equipment
(913) 782-1238 (Tel)(913) 782-4206 (Fax)
[email protected]: PS105_0509
Approximate Unit WeightDouble Planetary 180 lbs / 82 kgTriple Planetary 198 lbs / 90 kg
Oil Capacities
Pos
ition Quantity
Double Planetary
Triple Planetary
Vertical 2.50 pts(1.2 L)
3.00 pts(1.4 L)
Horizontal 2.25 pts(1.1 L)
2.75 pts(1.3 L)
All units are shipped dry (without oil).
Dimension "A" Specifi cations
Standard Input Mounting
Input Spline Code Ratio SAE 'A' SAE 'B' SAE 'C'
2, 3, 5 19, 26, 36 8.09(205.5)
8.04(204.2)
8.34(211.8)
4 19, 26 8.34(211.8)
8.34(211.8)
8.34(211.8)
4 36 9.59(243.6)
9.59(243.6)
9.59(243.6)
All 33, 45 9.59(243.6)
9.59(243.6)
9.59(243.6)
105 Gear Drive - Shaft OutputTypical Applications: Industrial, Marine or Mobile Equipment
(913) 782-1238 (Tel)(913) 782-4206 (Fax)
[email protected]: PS105_0509
To adjust for loads and speeds other than those shown on above curve, use this formula:
Adjusted Life (hours) = 3000 10rpm
x Load (Curve) 10/3
Speed(Adjusted) Load (Adjusted)
Bearing Curve
105 Gear Drive - Shaft OutputTypical Applications: Industrial, Marine or Mobile Equipment
(913) 782-1238 (Tel)(913) 782-4206 (Fax)
[email protected]: PS105_0509
Output Shaft Options Values are shown as “inches (millimeters)”
D1 - 23T 8/16 DP Spline
D2 - 3.00" Dia. x ⅝" Key
105 Gear Drive - Shaft OutputTypical Applications: Industrial, Marine or Mobile Equipment
(913) 782-1238 (Tel)(913) 782-4206 (Fax)
[email protected]: PS105_0509
Ordering InformationExample Part Number: 105ED2B2-36
Z - Grease ZerkRequired for pinion-up ap pli ca tions
R - Rotated CoverFollowed by the num-ber of cover bolt-holes
to rotate Counter-Clockwise. (example: R2 would mean rotate cover 90 deg CCW).
Options
Double Planetary19 - 19.54:126 - 26.52:136 - 36.00:1
Triple Planetary86 - 86.35:1
117 - 117.21:1147 - 146.59:1159 - 159.12:1199 - 198.95:1216 - 216.00:1270 - 270.00:1
Higher ratios are avail-able. Consult your
Eskridge representative.
Ratio
2 - 13T 16/32 DP Spline3 - SAE 1"-6B Spline4 - 14T 12/24 DP Spline5 - 15T 16/32 DP Spline
Verify motor shaft compatibility with factory
Input Spline
A - SAE “A” (2 & Modifi ed4 Bolt)
B - SAE "B"(2 Bolt)
C - SAE "C"(2 & 4 Bolt)
See input mounting technical bulletin for
details.
Input Mounting
D1 - 23T 8/16 DP SplineD2 - 3.00" Dia x ⅝" Key C1 - Custom Shaft
See Hubs & Pinions technical bulletin for details.
Output Shaft
E - RectangularEQ - Quick EccentricC - Custom
Gear Drive Mounting
105
Model*
*Model 105 replaces the Model 100 gearbox; note that external dimensions and order options are similar between the 105 and 100 Model boxes. Please consult Eskridge for further information.