10.1” S-Series HMI Quick Start Guidedc.winmate.com.tw › _downloadCenter › 2016 › Multi-touch...

Please read these instructions carefully before using this product, and save this manual for future use.

10.1” S-Series HMI W10IB3S-PCH2AC-PoE

W10IB3S-PCH2-PoE Quick Start Guide

V1.1

Document Part Number: 9154111I100A

Contents Getting Started 3

Unpacking 4

Description Of Parts 5

Dimensions 6

Mounting 7

VESA Mount 7

Flush/ Panel Mount 7

Connector Description 8

DC Input Terminal Block Connector 8

Serial Port Connector 8

PoE/ LAN Connector 9

USB 2.0/ USB 3.0 Connector 9

HDMI Connector 9

Digital I/O Connector 10

Turning On or Off 11

Turning ON 11

Turning OFF 12

Operating the HMI Device 13

System Settings 13

Hot Tab Menu 13

Utilities 14

Brightness 14

Volume 14

LED Light Bar (Easy-Testing) 14

Performance 15

Touch Lock 16

Using HF RFID Reader 16

Reading Mode 17

Writing Mode 18

Using Front Camera 19

Opening the Camera 19

Shooting Photos 20

Recording Videos 21

Camera Settings 21

How to Enable Watchdog 22

Software Developer Support 24

Winmate Software Development Kit 24

Technical Specifications 25

HMI Device Specifications 25

HF RFID Reader 27

3

Getting Started Congratulations on purchasing Winmate® 10.1” S-Series HMI. Interactive and

smart automation systems of intelligent buildings are in a fast growing phase.

Winmate multi-touch S-Series HMI is suitable for home automation and room

management systems. Flat surface is easy-to-clean and delivers aesthetically

pleasing look for any interior. By connecting to centralized database, it can provide

real time update for booking status and available schedule, or perform as a

synchronous display in meetings.

S-Series HMI run on 1.83GHz Intel® Celeron® N2930 processor and support

Windows 10 IoT, Windows Embedded 8.1 Industry Pro, Windows Embedded

8Standard, Windows 7 Pro for Embedded Systems, and Windows Embedded

Standard 7– WS7P. For easy, quick and cost effective network installations both

models support PoE. These models sealed with front IP 65 dust and water proof,

and IP22 on the back side. Optional HF RFID 13.56 MHz is especially useful in

access control applications.

S-Series HMI has an exceptional feature - LED light bar. With the help of red,

green, blue and orange LED indicators you can see the status of the machine or

processes afar. It significantly reduces power consumption by keeping the display

turned off.

Winmate® 10.1” S-Series HMI features:

10.1'' 1280 x 800 Resolution with P-Cap multi-touch screen

PoE standard IEEE 802.3at (25 W)

Fanless cooling system and ultra-low power consumption

Dual Gigabit Ethernet

Front IP65 water and dust proof

Red/ Green/ Blue/ Orange LED light bar indicators on both sides

Optional HF RFID Reader

Optional 2MP Front Camera

Room booking schedule, access control, room information display

4 Please read these instructions carefully before using this product, and save this guide for future use.

Unpacking

Carefully remove the box and unpack your device. Please check if all the items

listed below are inside your package. If any of these items are missing or

damaged contact us immediately.

Standard factory shipment list:

10.1” HMI Device Quick Start Guide

(Hardcopy) Driver CD & User

Manual

AC Adapter (12V/ 50W)

Power Cable Terminal Block 3 pin

External USB Cable VESA Mounting Screws

5

Description Of Parts

W10IB3S-PCH2AC-PoE

W10IB3S-PCH2-PoE

*Digital I/O is an optional connector and may not be present in your model.


Dimensions

Dimensions (W x L x H): 263.28 x 171 x 35.7 mm

*Note: Measurements shown in mm.

**Note: this is a simplified drawing and some components are not marked in detail.

7

Mounting S-series HMI devices come with different mounting options suitable for most of the

industrial and commercial applications.

VESA Mount

Dimensions Screw hole diameter Compatibility

75 x 75 mm VESA M4x5 mm Swing arm mounting kits

Flush/ Panel Mount

Wall cutout Screw hole diameter

157.6 x 249 mm M3x4 mm


Connector Description This section explains how to connect external interfaces to the HMI device.

DC Input Terminal Block Connector

DC power source input is a 3 pin terminal block connector.

Serial Port Connector

Use COM1 serial port connector to connect your HMI to external devices such as

mouse, modem or printer. You can configure serial port setting via jumpers

located on the motherboard. You need to open the housing in order to access

the jumpers.

CAUTION/ ATTENTION

It is recommended to use factory jumper settings. Opening the housing

when it is sealed may damage the device and its parts.

Refer to User Manual for instructions on how to configure serial port setting.

Voltage

Minimum Voltage 11.4V Maximum Voltage 12.6V Maximum Current 4.2A

Pin № RS-232 (Default)

RS-422 RS-485

1 DCD TxD- D-

2 RXD TxD+ D+

3 TXD RxD+ NC

4 DTR RxD- NC

5 GND GND GND

6 DSR NC NC

7 RTS NC NC

8 CTS NC NC

9 RI NC NC

9

PoE/ LAN Connector

The 10.1” S-Series HMI supports one RJ45 10/100/1000 Mbps Ethernet interface for connecting to the internet. Support IEEE 802.3at PoE.

USB 2.0/ USB 3.0 Connector

Use USB 2.0/ USB 3.0 connector to connect your HMI device to other USB 2.0/

USB 3.0 compatible devices.

USB2.0 / USB 3.0

HDMI Connector

Pin № Name Pin № Name

1 TX1+ 2 TX1-

3 TX2+ 4 TX2-

5 TX3+ 6 TX3-

7 TX4+ 8 TX4-


1 +5V 2 USB_D-

3 USB_D+ 4 GND

5 STDA_SSRX- 6 STDA_SSRX+

7 GND_DRAIN 8 STDA_SSTX-

9 STDA_SSTX+ 10 +5V

11 USB_D- 12 USB_D+

13 GND

Pin №

Name Pin № Name

1 TMDS_DATA2+ 2 GND

3 TMDS_DATA2- 4 TMDS_DATA1+

5 GND 6 TMDS_DATA1-

7 TMDS_DATA0+ 8 GND

9 TMDS_DATA0- 10 TMDS_CLOCK+

11 GND 12 TMDS_CLOCK-

13 CEC 14 NC

15 DDC_CLOCK 16 DDC_DATA

17 GND 18 5V

19 Hot Plug Detect


Digital I/O Connector


1 GND 2 DO0

3 DO1 4 DI0

5 DI1

Voltage

Digital output: Open drain to 40V ; Maximum load 2.0A Digital input: Level 0: close to GND; Level 1: 2.5~12V

11

Turning On or Off

Turning ON

Follow the following steps to turn on your device:

1. Connect HMI device to a thermal block (3-pin).

2. Connect the other side of the thermal block to the AC adapter.

3. Connect the AC adapter to the power cord.

4. Plug in the power cord to a working AC wall outlet. The device will boot

automatically.

CAUTION Use only the AC adapter (12V/ 50W) included in your package (Rating: Output 4.2 A). Using other AC adapters may damage the device.

ALTERNATING CURRENT This product must be grounded. Use only a grounded AC outlet. Install the additional PE ground wire if the local installation regulations require it.


Turning OFF

To shut down the device:

1. Tap Start >Shut down.

2. Wait for your HMI device to completely turn off before disconnecting the

power cord (if necessary).

13

Operating the HMI Device Winmate® 10.1” S-Series HMI support several versions of Windows OS:

Windows 10 IoT, Windows Embedded 8.1 Industry Pro, Windows Embedded 8

Standard, Windows 7 Pro for Embedded Systems, and Windows Embedded

Standard 7– WS7P.

IMPORTANT:

The device is shipped with the OS System according to your order.

Contact us if you have any questions regarding OS settings.

System Settings

Hot Tab Menu

1. Double-click the Hot Tab icon on the Windows desktop.

2. The Hot Tab main menu will appear on the screen as shown below.

NOTE:

RFID and LED Light Bar are optional features and may not be

present in your model.


Utilities

Utilities category allows automatically changing

orientation from landscape to portrait mode or rotating

the desktop to a different degree as 0°, 90°, 180°, and

270°.

Brightness

Tap Brightness button to show current brightness level.

To reduce the brightness, drag by touch to

the left.

To enhance the brightness, drag by touch to

the right.

Tap Close to save changes and exit the interface.

Volume

Tap Volume button to show your current volume level.

To decrease the volume, drag by touch to the

left.

To increase the volume, drag by touch to the

right.

Tap Close to save changes and exit the interface.

LED Light Bar (Easy-Testing)

Notice that LED Light Bar is an optional feature for 10.1” S-Series HMI and may

not be present in your device.

15

Tap Light Bar to access the LED light bar control panel, and select Red /

Green / Blue/ Orange color to be displayed on the LED Bar.

Performance

User can adjust the performance level of the HMI device. There are four options

available:

Extreme performance

Office Document

High performance

Power Saving


Touch Lock

To LOCK touch screen, double-click the Hot Tab icon on the Windows

desktop, and tap Touch Lock.

To UNLOCK the touch screen, tap button to the right.

Using HF RFID Reader

Notice that HF RFID Reader is an optional feature for 10.1” S-Series HMI and

may not be present in your device.

HF RFID is commonly used for ticketing, payment, and data transfer applications.

The RFID Reader is located on the bottom right front side of the HMI device.

The COM Port setting in RFID Reader is “COM 14”

1. Double-click the RFID icon on the Windows desktop.

2. Reader menu appears on the screen as shown below.

Note:

The picture below of Reader Demo Version 1.4 is for illustration

purposes only. Your Reader version may differ from the picture

below.

17

Reader Demo Version 1.04

Reading Mode

Select the default RFID Reader COM14or press Search on the upper left

corner of the screen. The system will automatically find RFID COM port, show

the Version.

UID0 Menu

The system will read the data once the card will be near. You can select

different reader modes. Each mode is described below.

Item № Key button Function

1 E1- Version Displays the current version of RFID Reader

system

2 E2- Reset Reset all settings


Item № Key button Function

3 A0- Continuous

Read (default)

The RFID Reader will perform a series of

multiple scanning operations

4 A1- Once Read The RFID Reader will perform a single

scanning operation during the card is near

5 A9- Type Read The RFID Reader will perform a scanning

operation of IC type tag

To scan the card, bring it close to the right bottom front side of device with RFID

icon.

Item № Data 32 Function

6 XXXXABCDEF Display the information written in the card

Writing Mode

Refer to the RFID Porting Guide SDK to configure Write Mode parameters.

19

Using Front Camera Notice that 2MP Front Camera is an optional feature for 10.1” S-Series HMI and

may not be present in your device.

NOTE:

You camera screen may differ from the pictures in thus user

manual.

Opening the Camera

Perform one of the following to open the camera:

1. Press the F1 key.

2. Tap then double-tap to display the HotTab screen. Select Camera.

The Camera Screen

No Item Description

1 Video Tap to record videos

2 Photo Tap to capture photos


3 Settings

Tap to select the destination folder to save captured

photos and videos, enable preview, and select picture

resolution and quality

4 Close Tap to close the camera

5 Capture

Screen Shows the object to capture

Shooting Photos

1. Open the Camera.

2. Focus on the object.

3. Tap to capture the object.

4. By default, the photo preview is displayed briefly on the screen.

The preview screen automatically closes after 3 seconds. Alternatively, do one of

the following:

- Tap to delete the photo and return to the camera screen

- Tap to close the preview and return to the camera screen

21

Recording Videos

1. Open the Camera

2. Focus on the object

3. Tap to record the video. The video recording screen appears

4. Tap to stop recording and return to the camera screen

5. To playback the video, browse for the video file and play using a media

player application on your device

Camera Settings

1. Tap to open the setting page

2. Modify necessary settings.


No Item Description

1 Preview

Setting

Check one of the check boxes to show the preview

screen right after capturing a photo.

• Show Preview: Check this box and enter the

preview duration on Close preview after. When the

duration ends, the preview screen will automatically

close.

• Always Show Preview: When this box is checked,

the preview screen will only close when you tap the

return button ( ).

2 Picture Save Tap this button to browse for the folder directory

where you want to save captured photos.

3 Video Save

Folder

Tap this button to browse for the folder directory

where you want to save recorded videos.

4 Picture

Resolution

Select the picture resolution:

• 640 x 480

• 1600 x 1200

5 Picture Quality Select the picture quality: Low, Medium, High, Best.

3. When settings are complete, tap OK to apply and save changes.

How to Enable Watchdog To enable Watchdog, you need to download Winmate Watchdog utility. Find more

information on Watchdog in “Watchdog Guide” that you can download from

Winmate Download Center or File Share.

To enable watchdog in Watchdog AP follow the instructions below:

1. On the right bottom side of the desktop screen, click triangle button to

show hidden icons.

23

2. Click icon to open Watchdog utility.

3. In Watchdog utility window set countdown time and periodically feed time, or

disable watchdog.

Example:

Every 10 min watchdog will monitor the

system, in case any error occurs the

system will restart automatically when the

countdown time reaches 0.

Every 9 min watchdog timer will be reset to

10 min.

Settings Description

Watchdog

Countdown

Time

The system automaticity restarts when this countdown time

reaches zero.

Default: 10 min

Periodically

Feed Time

To set a cycle time to automatically reset watchdog timer.

Default: 9 min

Enable / Disable Enable or disable watchdog.

Default: Enable


Software Developer Support

Winmate Software Development Kit

Winmate® provides Software Development Kit (SDK). The table below lists SDK

provided by Winmate for 10.1” S-Series HMI with Freescale® Cortex® A9

processor:

Item File Type Description

1 Android SDK Android Driver Programming Guide

2 Linux SDK Linux Driver Programming Guide

3 USB Driver Android USB Driver

4 USB OTG Driver Android USB OTG Driver

To find the Drivers and SDK, please refer to the Driver CD that comes in the

package or contact us. Also, you can download drivers from Winmate Download

Center or Winmate File Share.

Winmate Download Center

Go to http://www.winmate.com.tw/ > Support > Download Center > Multi-Touch PPC > S-Series

HMI- Cortex A9 > Development Kit / Drivers

Or follow the link: http://www.winmate.com//DownCenter/DownLoadCenter.asp?DownType=3008

Winmate File Share

Go to http://www.winmate.com.tw/ > Support > Partner Portal > Public Documents > Panel PC > Multi-Touch HMI > S-Series HMI > FA33 > Development Kit / Drivers

Or follow the link: https://winmate.box.com/v/S-Series-HMI-FA33

Android Debug Bridge (ADB)

For detailed Android Debug Bridge (ADB) information refer to Android Developers Platform:

http://developer.android.com/tools/help/adb.html

http://www.winmate.com.tw/http://www.winmate.com/DownCenter/DownLoadCenter.asp?DownType=3008http://www.winmate.com.tw/https://winmate.box.com/v/S-Series-HMI-FA33http://developer.android.com/tools/help/adb.html

25

Technical Specifications

HMI Device Specifications

Model Name

W10FA3S-PCH2AC-PoE/ W10FA3S-PCH2-PoE

Display

Specifications

Size 10.1" TFT (widescreen)

Resolution 1280 x 800

Brightness ( ) 300 cd/m (typ.)

Contrast Ratio 800:1 (typ.)

Viewing Angle -89~89 (H); -89~89 (V)

Max Colors 262K (6bit)

Touch Projective-capacitive touch

System

Specification

CPU Freescale® Cortex® A9 i.MX6 Dual Core 1GHz

(Optional Quad Core)

System Chipset Freescale® i.MX6

Memory 1GB LPDDR3 (Optional 2GB LPDDR3)

Storage 16 GB eMMC (default)

mSATA/ Micro SD card

Ethernet Dual Broadcom BCM57780 GbE Controller

Speaker 1 x 1 watt speaker

OS Android 4.4 (default)

Linux Kernel 3.0.35, QT 5.4 Browser (optional)

I/O Connectors

Serial Port 2 x RS-232 (Default RS-422/optional 485)

USB Port 2 x USB 2.0 host

1 x USB OTG


Ethernet Port 1 x RJ 45-10/100/1000 Mbps (LAN/ PoE)

Memory 1 x Micro SD card

Peripheral

(optional)

NFC

Peer-to-peer, Full ISO 18092(up to 424 Kbits/s)

Reader/writer, ISO 14443-A-B, MIFARE, FeliCa

NFC Forum tags, ISO 15693

(W10FA3S-PCH2AC-PoE)

Front Camera 2MP Front Camera (W10FA3S-PCH2AC-PoE)

LED Light Bar RGBO LED Light bar on sides

(W10FA3S-PCH2AC-PoE)

Power

Management

Power Input 12 DC in 3-Pin Terminal Block (phoenix type)

Power over

Ethernet

Support PoE, require IEEE 802.3at 25W power

input

Mechanical

Specifications

Dimensions

(W x L x H) 263.28 x 171 x 35.7 mm

Mounting VESA mount (75 x 75mm)

Cooling System Fanless design

Environmental

Considerations

Operating Temp. 0 °C to +50 °C

Humidity 30% to 90% (non-condensing)

IP Rating Front: IP65 water and dust proof

Rear: IP22

27

HF RFID Reader

The RFID Reader can read and write data according to different HF RFID standards.

HF RFID Standard Purpose

ISO-14443 A Standard for MIFARE technology, which used in smart cards and proximity cards

ISO-15693 Standard for tracking items

ISO-18092 Standard for Near Field Communication (NFC), a short range technology that is commonly used for data exchange between devices

Winmate Inc. 9F, No.111-6, Shing-De Rd., San-Chung District, Taipei 241, Taiwan, R.O.C Tel: 886-2-8511-0288 Fax: 886-2-8511-0211 Email: [email protected] Official website: www.winmate.com
http://www.winmate.com/

10.1” S-Series HMI Quick Start Guidedc.winmate.com.tw › _downloadCenter › 2016 › Multi-touch...

Documents

Transcript of 10.1” S-Series HMI Quick Start Guidedc.winmate.com.tw › _downloadCenter › 2016 › Multi-touch...