100 FPM - img.sigmaequipment.com · 9 031-2219 sprocket, intralox-s900/3.5 (s) 3 ea 8 031-2077...
2
NOTES: THIS DRAWING AND ANY DESIGN, DEVELOPMENT, INVENTION, OR COPYRIGHT WHICH IT MAY EMBODY OR REPRESENT ARE THE SOLE PROPERTY OF SAFELINE Inc. THIS DRAWING MAY NOT BE COPIED IN WHOLE OR IN PART, NOR ANY SUBJECT MATTER SHOWN HEREIN BE MANUFACTURED, WITHOUT THE PRIOR EXPRESS WRITTEN CONSENT FROM AN AUTHORIZED AGENT OF SAFELINE Inc. TITLE: SHEETS: CUSTOMER: SIZE: DRAWN BY: CHECKED BY: DATE: ENGINEER: DRAWING NUMBER: REV UNLESS OTHERWISE SPECIFIED PERFECT ORIENTATION (OR COAXIALITY, OR SYMMETRY) AT MMC REQUIRED FOR RELATED FEATURES INTERPRETATIONS, STANDARDS, AND TOLERANCES TO BE IN ACCORDANCE WITH ANSI Y14.5 DIMENSIONS IN INCHES [MILLIMETERS] (PARENTHESES) DENOTE REF. ONLY TOLERANCES: UNLESS NOTED OTHERWISE .XXX = +/- .005 .XX = +/- .03 FRACT. = +/- 1/32 ANGLE = +/- 1 THIRD ANGLE PROJECTION DO NOT SCALE DRAWING of SIGMA PACKAGING **CERTIFIED DRAWING** 1 2 D SW 9/15/2009 SW 372Z9558 - 2955801,02 www.mt.com/safelineus Metal Detection & X-ray Inspection SAFELINE * PRODUCT DESCRIPTION: BIN OF HYGENICS LENGTH: 10" WIDTH: 10" HEIGHT: 4.0" WEIGHT: < 5 lbs TEMPERATURE: 86 °F RATE: 30 P.P.M. * 10" WIDE, INTRALOX FLUSH GRID, 900 SERIES, POLYPROPYLENE BELT * UPON DETECTION OF METAL A BLAST OF AIR WILL BLOW ACROSS THE BELT AT 90° TO THE DIRECTION OF THE PRODUCT FLOW TO REMOVE CONTAMINATED ITEMS TO THE LEFT * FRAME CONSTRUCTION: #304 STAINLESS STEEL, BRUSHED FINISHED FULLY WELDED SQUARE SECTION TUBING * SAFELINE METAL DETECTOR: COMPACT, POWDER COATED SILVER, CONSTRUCTION, WITH 11" x 6" APERTURE, 300 khz FREQ. (MAX. USABLE PRODUCT OPENING 10.0" x 6.61") * 4.0" HIGH FIXED PRODUCT GUIDES: FULL LENGTH (EXCEPT REJECT AREA) * SINGLE POWER SUPPLY 115/1/60 (15 amps) * DETECTOR & CONVEYOR CONTROLS ARE LOCATED ON THE LEFT SIDE WHEN VIEWED FROM THE INFEED * 3.0" P.D. DONUTS ON INFEED / 3.5" P.D. SPROCKETS ON OUTFEED * SYSTEM TO BE MOUNTED ON LEVELING PADS WITH +/-2.0 ADJUSTABILITY * SYSTEMS 2955801 AND 2955802 ARE IDENTICAL 40.0 (+/-2.0) 4.00 1 4.84 27.21 45.49 54.00 10.00 (BELT) 6.61 27.65 24.00 5.02 1 0.00 100 FPM 54.71 CONTROL SI DE CERTIFIED DRAWING AS BUILT YOUR MACHINE AND/OR DTECTOR IS BEING BUILT TO THIS DRAWING ANY CHANGES WILL INCUR DELAYS AND REDESIGN CHARGES DATE: SAFELINE, INC. 9/15/2009 1 7.00 4.00 42.43 1 8.00 3 8" AIR INLET RESEVI OR ASSEMBLY TO DRILL 9 64" RELIEF HOLE IN NOZZLE
Transcript of 100 FPM - img.sigmaequipment.com · 9 031-2219 sprocket, intralox-s900/3.5 (s) 3 ea 8 031-2077...
NOTES:
THIS DRAWING AND ANY DESIGN, DEVELOPMENT, INVENTION, OR COPYRIGHTWHICH IT MAY EMBODY OR REPRESENT ARE THE SOLE PROPERTY OF SAFELINE Inc.
THIS DRAWING MAY NOT BE COPIED IN WHOLE OR IN PART, NOR ANY SUBJECTMATTER SHOWN HEREIN BE MANUFACTURED, WITHOUT THE PRIOR EXPRESS
WRITTEN CONSENT FROM AN AUTHORIZED AGENT OF SAFELINE Inc.
TITLE: SHEETS: CUSTOMER: SIZE:
DRAWN BY:
CHECKED BY:
DATE:
ENGINEER:
DRAWING NUMBER:
REV
UNLESS OTHERWISE SPECIFIED
PERFECT ORIENTATION (OR COAXIALITY, OR SYMMETRY)AT MMC REQUIRED FOR RELATED FEATURES
INTERPRETATIONS, STANDARDS, AND TOLERANCESTO BE IN ACCORDANCE WITH ANSI Y14.5
DIMENSIONS IN INCHES [MILLIMETERS](PARENTHESES) DENOTE REF. ONLYTOLERANCES:
UNLESS NOTED OTHERWISE.XXX = +/- .005
.XX = +/- .03FRACT. = +/- 1/32
ANGLE = +/- 1
THIRD ANGLE PROJECTION
DO NOT SCALE DRAWING
of
SIGMA PACKAGING**CERTIFIED DRAWING** 1 2 D
SW 9/15/2009
SW
372Z9558-
2955801,02
www.mt.com/safelineus
Metal Detection & X-ray Inspection
SAFELINE
* PRODUCT DESCRIPTION: BIN OF HYGENICS LENGTH: 10" WIDTH: 10" HEIGHT: 4.0" WEIGHT: < 5 lbs TEMPERATURE: 86 °F RATE: 30 P.P.M. * 10" WIDE, INTRALOX FLUSH GRID, 900 SERIES, POLYPROPYLENE BELT * UPON DETECTION OF METAL A BLAST OF AIR WILL BLOW ACROSS THE BELT AT 90° TO THE DIRECTION OF THE PRODUCT FLOW TO REMOVE CONTAMINATED ITEMS TO THE LEFT * FRAME CONSTRUCTION: #304 STAINLESS STEEL, BRUSHED FINISHED FULLY WELDED SQUARE SECTION TUBING * SAFELINE METAL DETECTOR: COMPACT, POWDER COATED SILVER, CONSTRUCTION, WITH 11" x 6" APERTURE, 300 khz FREQ. (MAX. USABLE PRODUCT OPENING 10.0" x 6.61") * 4.0" HIGH FIXED PRODUCT GUIDES: FULL LENGTH (EXCEPT REJECT AREA) * SINGLE POWER SUPPLY 115/1/60 (15 amps) * DETECTOR & CONVEYOR CONTROLS ARE LOCATED ON THE LEFT SIDE WHEN VIEWED FROM THE INFEED * 3.0" P.D. DONUTS ON INFEED / 3.5" P.D. SPROCKETS ON OUTFEED * SYSTEM TO BE MOUNTED ON LEVELING PADS WITH +/-2.0 ADJUSTABILITY * SYSTEMS 2955801 AND 2955802 ARE IDENTICAL
40.0 (+/-2.0)
4.00
14.84 27.21
45.49
54.00
10.00 (BELT)
6.61
27.65
24.00
5.02
10.00
100 FPM
54.71
CONTROL SIDE
CERTIFIED DRAWINGAS BUILT
YOUR MACHINE AND/OR DTECTOR IS BEING BUILT TO THIS DRAWINGANY CHANGES WILL INCUR DELAYS AND REDESIGN CHARGES
DATE:
SAFELINE, INC.
9/15/2009
17.00
4.00
42.43
18.00
38" AIR INLETRESEVIOR
ASSEMBLY TO DRILL9
64" RELIEF HOLE IN NOZZLE
NOTES:
THIS DRAWING AND ANY DESIGN, DEVELOPMENT, INVENTION, OR COPYRIGHTWHICH IT MAY EMBODY OR REPRESENT ARE THE SOLE PROPERTY OF SAFELINE Inc.
THIS DRAWING MAY NOT BE COPIED IN WHOLE OR IN PART, NOR ANY SUBJECTMATTER SHOWN HEREIN BE MANUFACTURED, WITHOUT THE PRIOR EXPRESS
WRITTEN CONSENT FROM AN AUTHORIZED AGENT OF SAFELINE Inc.
TITLE: SHEETS: CUSTOMER: SIZE:
DRAWN BY:
CHECKED BY:
DATE:
ENGINEER:
DRAWING NUMBER:
REV
UNLESS OTHERWISE SPECIFIED
PERFECT ORIENTATION (OR COAXIALITY, OR SYMMETRY)AT MMC REQUIRED FOR RELATED FEATURES
INTERPRETATIONS, STANDARDS, AND TOLERANCESTO BE IN ACCORDANCE WITH ANSI Y14.5
DIMENSIONS IN INCHES [MILLIMETERS](PARENTHESES) DENOTE REF. ONLYTOLERANCES:
UNLESS NOTED OTHERWISE.XXX = +/- .005
.XX = +/- .03FRACT. = +/- 1/32
ANGLE = +/- 1
THIRD ANGLE PROJECTION
DO NOT SCALE DRAWING
of
SIGMA PACKAGING**CERTIFIED DRAWING** 2 2 D
SW 9/15/2009
SW
372Z9558-
2955801,02
www.mt.com/safelineus
Metal Detection & X-ray Inspection
SAFELINE
EA1 -- COMPACT HEAD DETECTOR --COMPACT11X644.6EA1 ASSY, ABH/WITH RESV/12 VDC390-685043EA1 ASSY, 16" PLASTIC CHAIN GUARD390-625442EA1 TRAY, REJECT (18" X 17" X 4.0") SS 086-186341EA2 MOUNTING, SKID (NO GUIDES) S1200 086-141340EA1 SHAFT, DRIVE - 1.0" SQ. (S1200) 10" BELT086-133939EA4 SUPPORT,SKIDRAIL OUTER 10" BELT(S1200)086-133838EA1 SUPPORT,SKIDRAIL INFEED 10" BELT(S1200)086-133737EA1 SHAFT, DONUT IDLER(Ø1.0")S1200(10" BELT)086-133636EA2 GUARD, LEXAN (INFEED/COMPACT)086-101535EA4 BLOCK, MOUNTING DETECTOR
COMPACT(SL1200)086-101234
EA8 SPACER, 1.0" L x Ø0.75OD x Ø0.44 ID,PLST086-082933EA2 MOUNTING, SKID/GUIDE S1200 (3.0") "I"086-082832EA4 MOUNTING, SKID/GUIDE S1200 (3.0") "O"086-082731EA1 BRACKET, IDLER MOUNT IN/R (SL1200)086-082330EA1 BRACKET, IDLER MOUNT IN/L (SL1200)086-082229EA2 BLOCK, BELT RETURN, INFEED (SL1200)086-082128EA1 PLATE, PHOTO-EYE MOUNT (S1500)086-053927EA1 PLATE, REFLECTOR MOUNT (S1500)086-053726EA2 GUARD, SAFETY/LEXAN/6 X 8.5086-015525EA3 SKID RAIL, 5/8 DELRIN( 47 x 1.38)085-4847-00D24EA2 BLOCK, BELT GUIDE INFEED (2.5 x 1.5)084-530323EA3(S)DONUT, - 3.0" O.D./HDPE082-005422EA6 ROD, PRODUCT GUIDE MT-PLASTIC081-083221EA1 BUSHING, ISOLATION-1" SHAFT081-000120EA1 FRAME, MAIN (2955801,02)072Z955819EA1 PLATE ELEC. ENCLOSURE MOUNT (SL1200)062-952618EA1 BRACKET, HEAVY AIR BLAST (SL1500)062-942017EA4(S)BRACKET, CASTER MOUNTING061-631016EA1 CONTROLS, ELECT 1151 .5H045-0179-a15EA1(S)MOTOR, 1/2 HP/WD/1PH/SS/115-230 56C041-408114FT10(S)BELT, S900/FG/PP-W/10" (10 FT)032-191013EA1(S)REDUCER, BOSTON-F718/15/J-WD031-365312EA2(S)BEARING, TAPPED BASE - S.S. 1"031-292211EA2(S)RING, EXTERNAL RETAINING, 1" SQ.031-282210EA3(S)SPROCKET, INTRALOX-S900/3.5031-22199EA1(S)SPROCKET, ROLLER CHAIN 40BTB15031-20778EA1(S)SPROCKET, ROLLER CHAIN 40BTB14031-20767EA1(S)BUSHING, TAPER LOCK-1008-1031-20536EA1(S)BUSHING, TAPER LOCK-1008-0.875031-20525EA6 RING,EXTERNAL RETAINING-1" DIA031-00064SF2 SHEET, UHMW WHITE - 1/8" THK (30.0" x 4.0")011-06053EA2 SHEET, HDPE- .50'' THK (46 x 2)[0.7 SF]011-03182EA6 ROD, DELRIN 1.000" DIA (5.88")011-00221
BILL OF MATERIALSU/MQTYSPAREDESCRIPTIONPART #ITEM
44.1
4
4
44
44
22
2236
21
32
33 3330 28
29
33
33 32
21
37
2424
24
2835
3
313
2
35
23
31
16
21
42
14
12
5
7
19
25
38
11
20
39
1010
9
11
8
6
9 9
15
1834
43
17
41
1
26
27
40
