10 01 RA4120AEN50GLA0 Nokia Solution

LTE FDD Nokia Solution

RA4120AEN60GLA0 1


RA4120AEN60GLA0 5


RA4120AEN60GLA0 6


RA4120AEN60GLA0 7


RA4120AEN60GLA0 8


RA4120AEN60GLA0 9


RA4120AEN60GLA0 10


RA4120AEN60GLA0 11


RA4120AEN60GLA0 12


RA4120AEN60GLA0 13


RA4120AEN60GLA0 14


RA4120AEN60GLA0 15


RA4120AEN60GLA0 16


RA4120AEN60GLA0 17


RA4120AEN60GLA0 18


RA4120AEN60GLA0 19


RA4120AEN60GLA0 20


RA4120AEN60GLA0 21


RA4120AEN60GLA0 22


RA4120AEN60GLA0 23


RA4120AEN60GLA0 24


RA4120AEN60GLA0 25


RA4120AEN60GLA0 26


RA4120AEN60GLA0 27


RA4120AEN60GLA0 28


RA4120AEN60GLA0 29


RA4120AEN60GLA0 30


RA4120AEN60GLA0 31


RA4120AEN60GLA0 32


RA4120AEN60GLA0 33


RA4120AEN60GLA0 34


RA4120AEN60GLA0 35


RA4120AEN60GLA0 36


RA4120AEN60GLA0 37


RA4120AEN60GLA0 38


RA4120AEN60GLA0 39


RA4120AEN60GLA0 40


RA4120AEN60GLA0 41


RA4120AEN60GLA0 42


RA4120AEN60GLA0 43


RA4120AEN60GLA0 44


RA4120AEN60GLA0 45


RA4120AEN60GLA0 46


RA4120AEN60GLA0 47


RA4120AEN60GLA0 48


RA4120AEN60GLA0 49


RA4120AEN60GLA0 50

Configuration FSMF with FBBA/FBBC module can be used for:

•Dual RF band 3-sector configurations with standard 2TX/2RX with FSMF

•6 sector configurations with default 2TX/2RX

•2TX and 4RX configurations

•4TX and 4RX configurations


RA4120AEN60GLA0 51


RA4120AEN60GLA0 52


RA4120AEN60GLA0 53


RA4120AEN60GLA0 54


RA4120AEN60GLA0 55

• In RL30 implementation FHCC support bands 850 MHz, 1800 MHz and 10 MHz bandwidth in dedicated, coupled and mixed mode.

• Current RL60 implementations FHCC support additional band 2600 MHz and extended to 20 MHz bandwidth (for band 1800 and 2600) in dedicated mode only.

• Only single band (850, 1800 or 2600) configurations per one FSME/FSMF System Module per one FHCC RIU is possible.

• It is possible to configure dual band configuration in one FSME/FSMF and then two RIUs can be connected to one FSME/FSMF where each RIU supports different frequency band respectively.


RA4120AEN60GLA0 56


RA4120AEN60GLA0 57


RA4120AEN60GLA0 58

•One System Module can support a combination of two cells of 20MHz and two cells of 10 MHz bandwidth with 2TX MIMO • Following configurations are supported with required radio HW and with FSME/FSMF for Korean market: • LGU+

•20MHz @2.6GHz (FRHB) and 10MHz @ 850MHz (FHCA) •20MHz @2.6GHz (FRHA) and 10MHz @ 850MHz (FXCA) •20MHz @2.6GHz (FRHB) and 10MHz @ 2.1GHz (FRGQ) •20MHz @2.6GHz (FRHA) and 10MHz @ 2.1GHz (FRGP)

• SKT

•20MHz @1.8GHz (FHEA/FHEB) and 10MHz @ 850MHz (FXCC) •20MHz @1.8GHz (FXEB) and 10MHz @ 850MHz (FXCA)

• KT

•20MHz @ 1.8GHz (FHEA) and 10MHz @ 900MHz (FHDB)


RA4120AEN60GLA0 59

10 01 RA4120AEN50GLA0 Nokia Solution

Documents

Transcript of 10 01 RA4120AEN50GLA0 Nokia Solution