1 XAS 375 JD6 Compressors Scott Malm Committed to sustainable productivity.

1

XAS 375 JD6 Compressors

Scott Malm

Committed tosustainable productivity.

2

Product Data - XAS 375 JD6

Settings/Shutdowns - XAS 375 JD6

4

AIR SYSTEM INLET VALVE

Spring loaded in the open position

Control Air closes the inlet

Also serves as check valve

Unloading valve

Regulating valve Regulating valve

Load solenoid

Min Press valve

Unloading valve

Load solenoid

Min Press valve

No Load/ Starting Load

Regulating valve Regulating valveUnloading valveUnloading valve

Min Press valve Load solenoid Min Press valve Load solenoid

Unload Blow Down

9

REGULATING SYSTEM REG VALVE

Spring loaded

Adjusting receiver pressureby changing spring tension

• to pressure gauge and loading valve

• to speed regulator• to unloading valve

Regulating pressure:

Receiver pressure

The air receiver pressure can be set to another value by adjusting the spring tension of the regulating valve. This is done by turning the handle on top the valve. Increasing the spring tension, by turning in, will increase the regulating pressure and consequently the pressure inside the vessel. Turning out will decrease the pressure.

In order to regulate the pressure inside the reciever tank of our compressor, the air intake and the engine speed have to be controlled. This is done pneumatically. For that reason, we need regulating pressure. The regulating valve reduces the pressure inside the tank, thus providing the regulating pressure. This regulating pressure is then supplied to the unloader valve and the speed regulator or RPS.

10

Maintains a minimum pressure

of 58 PSI for oil flow

Also contains the final check

valve

AIR SYSTEM MIN PRESS VALVE

Control Panel

Load Solenoid Valve – 1089 9515 02

Maintenance – XAS 375 JD6

14

XC 2002 Controllers

15

XC2002 Controller - XAS 375 JD

16

XC2002 Control Module

Display

Fuel Level

Engine Coolant Temperature

Engine Oil Pressure

Engine RPM

Battery Voltage

Service Timers

Engine Inlet Air Temperature

Fuel Consumption (L/H)

Engine Fuel Temperature

Regulating Pressure

Log List – Will Hold last 30 Historic Codes

Alarm List – Shows Active Alarms Only

Parameters – Choose Another Language, Reset Service Timers, Change Measuring Units, etc…

Control Module – 1604 9516 01

XC2002 Controller

John Deere codes will display here

XC2002 Controller

XC2002 Controller – * Unit Type 2

J1939 Canbus Communication

J1939 Canbus Communication . Cont…

John Deere Engine Fault Code List

Displaying of J1939 DM1 Alarms

34

Electrical System

35

Legend

Detailed Electrical Diagram

36

37

John Deere – Tier III – RPS in place of Pneumatic Speed Regulator

Regulating Pressure Sensor

“Speed Sensor”

38

*Preheat Relay K1 Controlled by JDEC

Starter RelayPreheat Relay

K1 – Preheat Relay – JDEC Warning

Troubleshooting - Information

40

41


42


43

Preventive Maintenance Filter Kits – XAS 375 JD6

Spare Parts Recommendation

Committed tosustainable productivity.

1 XAS 375 JD6 Compressors Scott Malm Committed to sustainable productivity.

Documents

Transcript of 1 XAS 375 JD6 Compressors Scott Malm Committed to sustainable productivity.