1 UTC Fire & Security EMEA ACL 800 Reader Range ACL800 Series The Alliance of Design and Security...

1UTC Fire & Security EMEA

ACL 800 Reader Range

ACL800 SeriesThe Alliance of Design and

Security

Mini Surface and Flush mount range



The readers: Surface mount (2 colours)

3D rotation view

Mounting steps



The readers: Flush mount (3 colours)

Create your own combination of front plates and electronics:3 (Dark Gray/Silver/White) different front plates for 5 different electronics



TAILOR-MADE PRODUCTS: they are compatible with single gang flush back boxes, making installation simple. TAILOR-MADE PRODUCTS: they are compatible with single gang flush back boxes, making installation simple.

The readers: Flush mount

3D mounting

Possibility to connect a master reader to a slave reader to get a double technology

ACL870W ACL800-RDREM Controller



A new access control range

TAILOR-MADE PRODUCTS: they are compatible with single gang flush back boxes, making installation simple (flush mount range)

COLOURS: Available in different colours to match surroundings and different types of building

HOUSINGS OR FRONT PLATES: same housing and front plate for the three technologies (Mifare, Proximity & Stand-Alone Relay)

LARGE RECTANGULAR LED:

A key defining feature of the range is the multi-colour rectangular status LED. The proximity reader’s change colour depending on whether the user’s key fob is accepted (green) or denied (red). The exit switch within the range is touch sensitive and also has the multi-colour notification - whether the door is closed (red) or open (green)

The new products with large rectangular status LEDs are designed to overcome the difficulty people may have in locating exit buttons when leaving a building



Reader Compatibility & Technology

Versions available•13,56 Mhz Mifare readers

• Mifare Classic CSN 4byte & 7 byte• Mifare DESFire EV1 CSN 7 byte• Mifare Lite CSN 7 byte

•125 Khz Proximity readers• CASI Rusco Proximity (EM) as used on TruPortal

Versions with interface• Wiegand interface • Stand-alone Relay interface

Configuration of different formats• 26 Bit / 34 Bit / 58 Bit: selectable either via Config Card or

Switches depending on model• LED control: selectable via Config Card or Switches

depending on selected model



Standalone Keypads: ACL870 & ACL870DIN

Features ACL870W ACL870DIN

Mounting: Surface Electrical flush back box

Housing: Moulded Aluminium ABS

Colour: Silver and Gray

Keys: Backlit Metallic

Resin potted electronic: Yes (with 1m cable) No

Outputs: 1 Relay (2A) & 1 Transistor (250mA) 2 Relays (3A/24V DC, 230V AC)

Master code (programming): 1

User codes: 99Relay time: Latching or timed from 1 to 99 seconds

Push to exit button input: 1

Memory: EEPROM (Keep programming safe even in case of power-cut)

Green LED: Output 1 status

Red LED: Output 2 status

Orange LED: Programming status and Key Press

Keypad blocking: For 30 seconds with beep noise after 8 consecutive incorrect codesBuzzer: 1

Anti-tamper: When open or dismantled

Consumption: 30mA in Stand-by. Max. 100mA Max. 120mA

Power: Automatic power seclect 12-24V DC; 15-24V AC

IP rating: 65 40Dimensions (mm): 92x51x25 80x80x9

ACL870-GRAYcolour ref.: Gray

ACL870-SILVcolour ref.: Silver

ACL870DIN + ACL800DIN-SILV colour ref.: Silver

ACL870DIN + ACL800DIN-GRAYcolour ref.: Gray



Network Keypads: ACL870W & ACL870DINW

Features ACL870W ACL870DINW




Keys: Backlit Metallic


Communication Protocols: Compatible with Wiegand 26, 30, 34, 40, 42, 58 bit, Clock & Data or 8bit per key

Green LED: Externally controlled

Red LED: Externally controlled

Orange LED: Programming status

Buzzer: 1

Anti-tamper protection: When open or dismantled

Consumption: 70mA 70mA

Power: 9-14V DC 9-14V DC

Illumination: Blue backlight (programmable on/off control)

IP Rating: 65 40

Operating Temperature. -20ºC to +50ºC

Dimensions (mm): 92x51x25 80x80x9

ACL870W-GRAYcolour ref.: Gray

ACL870W-SILV

colour ref.: Silver

ACL870DINW + ACL800DIN-SILV colour ref.: Silver

ACL870DINW + ACL800DIN-GRAYcolour ref.: Gray



Network 125 Khz EM Proximity Readers: ACL800-RDREM & ACL800DIN-RDREM

Features ACL800-RDREM ACL800DIN-RDREM





Communication Protocols: Wiegand 26, 34, 42 bits(jumper selection)

Wiegand 26, 34, 42 bits(jumper selection)

Proximity reading type: Casi Rusco

Reading distance: 2 to 5cm Max. 8cm

Green LED: Potential Free

Red LED: Potential Free

Orange LED: Idle mode

Buzzer: 1


Consumption: 20mA in stand-by, Max 35mA Max. 45mA

Power: 9-14V DC

IP Rating: 65 40



ACL800-RDREM-SILVcolour ref.: Silver

ACL800-RDREM-GRAYcolour ref.: Gray

ACL800DIN-RDREM + ACL800DIN-SILV colour ref.: Silver

ACL800DIN-RDREM + ACL800DIN-GRAYcolour ref.: Gray



Network 13,56 Mhz Mifare Proximity Readers: ACL800-RDRMF & ACL800DIN-RDRMF

Features ACL800-RDRMF ACL800DIN-RDRMF





Communication Protocols:

Wiegand 26, 34, 58 bits(programmable by card)

Wiegand 26, 34, 58 bits(programmable by card)

Proximity reading type: Mifare Clasic, Mifare Ultralight, Mifare Desfire (13,56MHz)

Reading distance: 1 to 3cm Max. 6cm

Green LED: Potential Free

Red LED: Potential Free

Orange LED: Idle Mode

Buzzer: 1


Consumption: Max 110mA Max. 150mA

Power: 9-14V DC

IP Rating: 65 40



ACL800-RDRMF-SILVcolour ref.: Silver

ACL800-RDRMF-GRAYcolour ref.: Gray

ACL800DIN-RDRMF + ACL800DIN-SILV colour ref.: Silver

ACL800DIN-RDRMF + ACL800DIN-GRAYcolour ref.: Gray



Sensitive Push Button: ACL800-PB & ACL800DIN-PB

Features ACL800-PB ACL800DIN-PB




Technology: Touch sensitiveBacklighting: Green (Door opened) – Red (Door Closed)

Exit: Relay 1A (NO/C/NC)

Relay output: On/off or Timed (3, 5 or 10 seconds)

Visual and Sound Signals:

Complete button lighting + buzzer

Wiring: 1m cable Terminal block

Consumption: Min. 45mA, Max 80mA Max. 65mA

Power: 12-24VDC; 15-24VAC

IP Rating: 65 40



ACL800-PB-GRAYcolour ref.: Gray

ACL800-PB-SILV

colour ref.: Silver

ACL800DIN-PB + ACL800DIN-GRAY colour ref.: Gray

ACL800DIN-PB + ACL800DIN-SILVcolour ref.: Silver



Partnumbers – Flush Mount

Partnumber Type Interface Mounting Description

ACL800DIN-RDREM Rdr 125 Khz Wiegand Flush Mount EM Flush mount Reader - Wiegand

ACL800DIN-RDRMF Rdr 13,56 Mhz Wiegand Flush Mount Mifare Flush mount Reader - Wiegand

ACL800DIN-PB Push Button Flush Mount Capacitive Flush Mount Push Button

ACL870DIN Keypad Relay Flush Mount Standalone Flush Mount Keypad

ACL870DINW Keypad Wiegand Flush Mount Wiegand Flush Mount Keypad

ACL800DIN-GRAY Colour Frame Flush Mount Dark Gray Single Frame

ACL800DIN-SILV Colour Frame Flush Mount Silver (Light Gray) Single Frame

ACL800DIN-WHT Colour Frame Flush Mount White Single Frame



Partnumbers – Surface Mount

Partnumber Type Interface Mounting Description

ACL800-PB-GRAY Push Button Surface Mount Gray Surface Mount PB

ACL800-PB-SILV Push Button Surface Mount Silver Surface Mount PB

ACL870-SILV Keypad Relay Surface Mount Silver Surface Mount Standalone Keypad

ACL870-GRAY Keypad Relay Surface Mount Dark Gray Surface Mount Standalone Keypad

ACL870W-SILV Keypad Wiegand Surface Mount Silver Wiegand Surface Mount Keypad

ACL870W-GRAY Keypad Wiegand Surface Mount Dark Gray Wiegand Surface Mount Keypad

ACL800-RDREM-SILV Rdr 125 Khz Wiegand Surface Mount Silver EM Surface mount Reader

ACL800-RDREM-GRAY Rdr 125 Khz Wiegand Surface Mount Dark Gray EM Surface mount Reader

ACL800-RDRMF-SILV Rdr 13,56 Mhz Wiegand Surface Mount Silver Mifare Surface mount Reader

ACL800-RDRMF-GRAY Rdr 13,56 Mhz Wiegand Surface Mount Dark Gray Mifare Surface mount Reader



Configuration cards & Usage

• Configuration cards can be used to toggle between the reader modes• Two separate cards are made available

• Configuration card1: Wiegand Output, by default it is 26 bits1. Switch ON the Reader and the reader will blink in orange, indicating that is waiting for the programming cards (Wiegand

or Backlight Card)

2. In the next 60 seconds, present the Wiegand card. 1 beep + 1 blink indicates that the reader is programmed in Wiegand 26 bit.

3. Present the Wiegand Card again and 2 beeps + 2 blinks indicates that the reader is programmed in Wiegand 34bit.

4. Present the Wiegand Card again and 3 beeps + 3 blinks indicates that the reader is programmed in Wiegand 58bit.

• Configuration card2: LED control



Programming of Relay Output Version

1 UTC Fire & Security EMEA ACL 800 Reader Range ACL800 Series The Alliance of Design and Security...

Documents

Transcript of 1 UTC Fire & Security EMEA ACL 800 Reader Range ACL800 Series The Alliance of Design and Security...