1 UNIVERSITY OF TWENTE DEPARTMENT ENGINEERING TECHNOLOGY Group Engineering Fluid Dynamics...

1

UNIVERSITY OF TWENTEUNIVERSITY OF TWENTEDEPARTMENT ENGINEERING DEPARTMENT ENGINEERING

TECHNOLOGYTECHNOLOGYGroup Group Engineering Fluid DynamicsEngineering Fluid Dynamics

MSc-Information MeetingMSc-Information MeetingTechnische Stromingsleer - TSTechnische Stromingsleer - TSMarch 5 2008

Prof.dr.ir. H.W.M. Hoeijmakers

2

Vortex

Group Engineering Fluid DynamicsVakgroep Technische Stromingsleer

PROGRAM• CurriculumCurriculum• Internship & MSc thesis AssignmentInternship & MSc thesis Assignment• Research Themes TSResearch Themes TS• After Graduation??After Graduation??• QuestionsQuestions• Internship: Roel MüllerInternship: Roel Müller• MSc thesis Assigment: Tijmen TonMSc thesis Assigment: Tijmen Ton• Visit to Laboratory (WH.118)Visit to Laboratory (WH.118)

Drinks March 19 (17:15 achter C101)Drinks March 19 (17:15 achter C101)

3

Group Group Engineering Fluid DynamicsEngineering Fluid DynamicsStaffStaffHarry Hoeijmakers Harry Hoeijmakers Günter SchnerrGünter SchnerrMico HirschbergMico HirschbergNiels Kruyt Niels Kruyt Rob HagmeijerRob HagmeijerKees VennerKees VennerFrans de JonghFrans de JonghWouter den BreeijenWouter den BreeijenGuido ZwartGuido ZwartHerman StobbeHerman StobbeAnjenet Mettivier Meyer (secretary)Anjenet Mettivier Meyer (secretary)

Arjen KoopArjen KoopMarco van ZoelenMarco van ZoelenRyan SidinRyan SidinHein de VriesHein de VriesRemko WestraRemko WestraJesse SlotJesse SlotJacco HospersJacco Hospers

41 MSc students41 MSc students

4


•Research & Development:Research & Development:technologytechnology

•Design & Construction:Design & Construction: machinery, vehicles, installations, processesmachinery, vehicles, installations, processes

•Organisation & ManagementOrganisation & Management (not offered in TS)

Tracks Master Mechanical Engineering:Tracks Master Mechanical Engineering:

5


CURRICULUMCURRICULUMYear 1: Courses Year 1: Courses (60 EC in total) (60 EC in total) Track-specificTrack-specific (20 EC)(20 EC) Course from other trackCourse from other track (5 EC)(5 EC) Group/Chair-specific courses Group/Chair-specific courses (35 EC)(35 EC)

Year 2: Year 2: (60 EC in total)(60 EC in total) Internship/traineeshipInternship/traineeship (15 or 20 EC)(15 or 20 EC) Extra CourseExtra Course ( 5 or 0 EC)( 5 or 0 EC) MSc thesis assignment MSc thesis assignment (40 EC) (40 EC)

6


Track-specific Courses (20 EC out of 30 EC):Track-specific Courses (20 EC out of 30 EC):Research & DevelopmentResearch & Development

Numerical Methods in Mechanical Engineering (115771, 5ECNumerical Methods in Mechanical Engineering (115771, 5EC))•Finite-Element Methods, Finite-Volume MethodsFinite-Element Methods, Finite-Volume Methods

Fluid Mechanics (115471, 5EC)Fluid Mechanics (115471, 5EC)•Flows of gases, liquidsFlows of gases, liquids

Solid Mechanics I, Elasticity (115772, 5EC)Solid Mechanics I, Elasticity (115772, 5EC)•Elasticity Theory of SolidsElasticity Theory of Solids

Transport Phenomena (114170, 5EC)Transport Phenomena (114170, 5EC)•Transport of Mass, Momentum and EnergyTransport of Mass, Momentum and Energy

System Identification & Parameter Estimation (113170, 5EC)System Identification & Parameter Estimation (113170, 5EC)•System Identification, ControlSystem Identification, Control

Solids & Surfaces (115570, 5EC)Solids & Surfaces (115570, 5EC)•Structure & Properties of Materials, Interaction of Surfaces and BulkStructure & Properties of Materials, Interaction of Surfaces and Bulk

7


Track-specific Courses (20 EC out of 30 EC):Track-specific Courses (20 EC out of 30 EC):Design & ConstructionDesign & Construction

Numerical Methods in Mechanical Engineering (115771, 5ECNumerical Methods in Mechanical Engineering (115771, 5EC))•Finite-Element Methods, Finite-Volume Methods Finite-Element Methods, Finite-Volume Methods

Construction Principles for Designing (113136, 5EC)Construction Principles for Designing (113136, 5EC)•Principles of Design ProcessPrinciples of Design Process

Process Equipment Design (375003, 5EC)Process Equipment Design (375003, 5EC)•Process/Reactor DesignProcess/Reactor Design

Design of Biomedical Products (115070, 5EC)Design of Biomedical Products (115070, 5EC)•Man-machine interactionMan-machine interaction

Design, Production & Materials (112172, 5EC)Design, Production & Materials (112172, 5EC)•Structure & Properties of materials

Design Principles, Product Design(110203, 3EC)Design Principles, Product Design(110203, 3EC)•CAD / CAM / Design ToolsCAD / CAM / Design Tools

8


Track-specific Courses (20 EC out of 30 EC):Track-specific Courses (20 EC out of 30 EC):Organisation & Management (not offered in TS)Organisation & Management (not offered in TS)

Design of Production & Inventory Systems (112472, 5EC)Design of Production & Inventory Systems (112472, 5EC)

Management van Productontwikkeling (113932, 5 EC)Management van Productontwikkeling (113932, 5 EC)

Cost Management & Engineering (110212, 3.6 EC)Cost Management & Engineering (110212, 3.6 EC)

Manufacturing Facility Design (110204, 5EC)Manufacturing Facility Design (110204, 5EC)

9


Year Ma-1 (35 EC)Year Ma-1 (35 EC)Fluid Dynamics Courses (>15EC)Fluid Dynamics Courses (>15EC)115472 Fluid Mechanics of Turbomachines 1115472 Fluid Mechanics of Turbomachines 1 5 EC5 EC115473 Computational Fluid Dynamics115473 Computational Fluid Dynamics 3.6EC3.6EC115440 Aeroacoustics115440 Aeroacoustics 3.6EC3.6EC115434 Gasdynamics115434 Gasdynamics 3.6EC3.6EC

115474 Bio-physical Fluid Dynamics: Respitory System115474 Bio-physical Fluid Dynamics: Respitory System 5 EC5 EC115475 Capita Selecta TS115475 Capita Selecta TS tbdtbd115476 Fluid Mechanics of Turbomachines 2115476 Fluid Mechanics of Turbomachines 2 3.6EC3.6EC115437 Aerodynamics115437 Aerodynamics 6 EC6 EC115477 Wave Motion115477 Wave Motion 5 EC5 EC358001 Turbulence358001 Turbulence 5 EC5 EC358002 Experimental Techniques in Physics of Fluids358002 Experimental Techniques in Physics of Fluids 5 EC5 EC Mathematics Courses ()Mathematics Courses ()155010 Theory of Partial Differential Equations155010 Theory of Partial Differential Equations 5 EC5 EC151044 Analysis C151044 Analysis C 3 EC3 EC155115 Numerical Techniques for Partial Differential Equations5155115 Numerical Techniques for Partial Differential Equations5 EC EC

10


Elective Courses ()Elective Courses ()

11xxxx Not chosen track courses in Research & Development, Design & Construction11xxxx Not chosen track courses in Research & Development, Design & Construction11/15/35/xxxx Not chosen fluid dynamics courses11/15/35/xxxx Not chosen fluid dynamics courses114142 Transport in Turbulent Str. m. Chem. Reacties114142 Transport in Turbulent Str. m. Chem. Reacties 3.6 EC3.6 EC114143 Gastechnologie114143 Gastechnologie 3.6 EC3.6 EC115573 Tribology115573 Tribology 5 EC5 EC115776 Solid Mechanics II, Plasticity115776 Solid Mechanics II, Plasticity 5 EC5 EC115775 Engineering Acoustics115775 Engineering Acoustics 5 EC5 EC115774 Advanced Dynamics115774 Advanced Dynamics 5 EC5 EC115773 Computational Structural Optimasation115773 Computational Structural Optimasation 5 EC5 EC115039 Biomechanics115039 Biomechanics 5 EC5 EC121096 Signal Processing in Acoustics & Audio121096 Signal Processing in Acoustics & Audio 5 EC5 EC141002 Thermodynamics and Statistical Physics141002 Thermodynamics and Statistical Physics 5 EC 5 EC 141114 General Relativity theory141114 General Relativity theory 5 EC5 EC144006 Electromagnetics, Fields and Waves144006 Electromagnetics, Fields and Waves 5 EC5 EC146012 Introduction to Optics146012 Introduction to Optics 5 EC5 EC

11


Elective Courses, continuedElective Courses, continued

150630 Applied Functional Analysis150630 Applied Functional Analysis 5 EC5 EC151110 Applied Numerical Linear Algebra151110 Applied Numerical Linear Algebra 5 EC5 EC152025 Theory of Complex Functions152025 Theory of Complex Functions 5 EC5 EC155116 Applied Finite Element Methods for PDE’s155116 Applied Finite Element Methods for PDE’s 6 EC6 EC156037 Applied Analytical Methods156037 Applied Analytical Methods 5 EC5 EC157108 Random Signals and Systems157108 Random Signals and Systems 5 EC5 EC371501 Reactor and Microreactor Engineering371501 Reactor and Microreactor Engineering 5 EC5 EC540041 Shallow Water Flows540041 Shallow Water Flows 3 EC3 EC574012 Wind Energy574012 Wind Energy 4 EC4 EC574003 Energy from Biomass574003 Energy from Biomass 5 EC5 EC

or propose any other relevant course that you find interesting.or propose any other relevant course that you find interesting.

12


CourseCourse 5-05-0

Internship/traineeshipInternship/traineeship 15-20 15-20

MSc thesis AssignmentMSc thesis Assignment 4040

Total Ma-2:Total Ma-2: 6060

Year Ma-2Year Ma-2

13


Netherlands (through TS)Netherlands (through TS):: Gasunie, Aeronamics, Flowserve, SiemensGasunie, Aeronamics, Flowserve, Siemens• Stork (Titan, Product Engineering), ADSEStork (Titan, Product Engineering), ADSE• ShellShell (SIEP, GS), Esso, (SIEP, GS), Esso, Thomassen Compression SystemsThomassen Compression Systems• Philips (DAP, AT)Philips (DAP, AT)• Wärtsila Ship Propulsion SystemsWärtsila Ship Propulsion Systems• NLR, ECN, MARIN, TNO’sNLR, ECN, MARIN, TNO’s• Teijin TwaronTeijin Twaron• Peutz AcousticsPeutz Acoustics• CDS Engineering, FramesCDS Engineering, Frames• etc...etc...

.

Internship/TraineeshipInternship/Traineeship

14


• La Sapienza, CIRA, AleniaLa Sapienza, CIRA, Alenia• EADS,EADS, DLR DLR, RWTH, BASF, GE, RWTH, BASF, GE• Cerfacs, OneraCerfacs, Onera• Rolls-Royce, ISVRRolls-Royce, ISVR• Nasa, Uni. of Syracuse, CaltechNasa, Uni. of Syracuse, Caltech• GE, BoeingGE, Boeing• Bombardier, NRCBombardier, NRC• ISAS, NAL, UniversityISAS, NAL, University• RMIT, University of Queensland, University of AucklandRMIT, University of Queensland, University of Auckland• ABBABB• ITA, Embraco, Uni of S, Caterina, etc…ITA, Embraco, Uni of S, Caterina, etc….

Internship/traineeship abroad (TS)Internship/traineeship abroad (TS)

15


MSc thesis AssignmentMSc thesis Assignment

• Internal or externalInternal or external? ? .• Type of AssignmentType of Assignment ? ? theoretical, numerical, experimental,theoretical, numerical, experimental, or combinationor combination• SubjectSubject ? ? from current research TSfrom current research TS new exploratory researchnew exploratory research personal preferencepersonal preference

• SupervisionSupervision ? ? by TS staffby TS staff planning!!planning!!

16

Group Group Engineering Fluid DynamicsEngineering Fluid Dynamics

Academic Education and Research in Fluid DynamicsAcademic Education and Research in Fluid Dynamics• theoreticaltheoretical• numericalnumerical• experimentalexperimental

Driven by applications in Driven by applications in Mechanical, Aerospace, Maritime Engineering, Mechanical, Aerospace, Maritime Engineering,

Process Industry,…Process Industry,…

Mission:Mission:

17

Group Group Engineering Fluid DynamicsEngineering Fluid Dynamics

Rotating-flow machines– Centrifugal pumps, Wind turbines– Flow Control, Fluid-Structure interaction– Thin-Film Flows

Aero-acoustics Multi-Phase Flows, Gasdynamics Bio-physical flows

Research ThemesResearch Themes

18

Engineering Fluid Dynamics

Rotating Flow MachinesRotating Flow Machines• pumps pumps • wind turbineswind turbines• compressorscompressors• propellerspropellers

EFD-FLOW

19


Aero-acousticsAero-acoustics• Computational Computational Aero-AcousticsAero-Acoustics• Experimental Experimental Aero-AcousticsAero-Acoustics

CFD domain

Source domain

CAA domain

Source domain can beautomatcally selected inSWIFT CAA using theCFD solution

Windscreen wipers

A-pillar

Rear-view mirror

20


Multi-Phase Flows, Gas Dynamics Multi-Phase Flows, Gas Dynamics

• Flows with condensationFlows with condensation• Flows with cavitationFlows with cavitation• Flows with separation of phasesFlows with separation of phases• In-flight Ice AccretionIn-flight Ice Accretion• GasdynamicsGasdynamics

21


Multi-Phase Flows, Gasdynamics Multi-Phase Flows, Gasdynamics

• Flows with condensationFlows with condensation• Flows with cavitationFlows with cavitation• Flows with separation of phasesFlows with separation of phases• In-flight Ice AccretionIn-flight Ice Accretion• GasdynamicsGasdynamics DSTI: In-line Separation Oil-Water

3TU, Shell, Frames, CDS

22



UT-TUD STW ProjectUT-TUD STW Project Structure of Unsteady 3D Sheet CavitationStructure of Unsteady 3D Sheet CavitationMarin, Wärtsilä, Flowserve, IHC/MTI, RNN, HRP, Marin, Wärtsilä, Flowserve, IHC/MTI, RNN, HRP,

van Voorden, Shell, Twister BVvan Voorden, Shell, Twister BV

Twist-11 aoa -2°, Twist-11 aoa -2°, σσrefref = 0.817 = 0.817 Inflow velocity: 50 m/s Outlet pressure: 10.0 105 Pa T = 297 K White iso-surface: α=0.05

23



UT-TUD STW ProjectUT-TUD STW Project Structure of Unsteady 3D Sheet CavitationStructure of Unsteady 3D Sheet CavitationMarin, Wärtsilä, Flowserve, IHC/MTI, RNN, HRP, Marin, Wärtsilä, Flowserve, IHC/MTI, RNN, HRP,

van Voorden, Shell, Twister BVvan Voorden, Shell, Twister BV

Twist-11 aoa -2°, Twist-11 aoa -2°, σσrefref = 0.817 = 0.817 Inflow velocity: 50 m/s Outlet pressure: 10.0 105 Pa T = 297 K White iso-surface: α=0.05

24


Flow Control & Fluid-Structure InteractionFlow Control & Fluid-Structure Interaction

• Active Flow Control Active Flow Control • Resonating valve in pulsating flowResonating valve in pulsating flow• Oscillating bladesOscillating blades• Flow of granular material Flow of granular material

25


Flow in thin FilmsFlow in thin Films• Elasto-Hydrodynamic LubricationElasto-Hydrodynamic Lubrication• Flow over a thin layer of liquid on anFlow over a thin layer of liquid on an aerodynamic surfaceaerodynamic surface

26


Bio-Physical FlowsBio-Physical Flows

• Flow in lungsFlow in lungs respiratory ventilationrespiratory ventilation deposition aerosolsdeposition aerosols motion of mucusmotion of mucus• Flow of blood and other liquidsFlow of blood and other liquids

27


FacilitiesFacilities• Test rig for pump impellers Test rig for pump impellers • 0.9 × 0.7 m0.9 × 0.7 m22 (70 m/s) silent wind tunnel (70 m/s) silent wind tunnel• 0.17 × 0.17 m0.17 × 0.17 m22 (40 m/s) pilot wind tunnel (40 m/s) pilot wind tunnel• 0.45 × 0.45 m0.45 × 0.45 m22 (30 m/s) wind tunnel (30 m/s) wind tunnel• small supersonic wind tunnelsmall supersonic wind tunnel• instrumentatie (HWA, visualisation)instrumentatie (HWA, visualisation)• ball-on-disc test rigball-on-disc test rig• Starling Resistor ( lung tubes)Starling Resistor ( lung tubes)

• CFD-labCFD-lab servers, PC-cluster, servers, PC-cluster, shared-memory 32-CPU super,shared-memory 32-CPU super, softwaresoftware

28


Silent WindtunnelSilent Windtunnel

Test sectionTest section: 0.9 × 0.7 m2 : 0.9 × 0.7 m2 Speed: up to 70 m/sSpeed: up to 70 m/s

29


After Graduation???After Graduation???Philips-DAPPhilips-DAPDSM, GasUnie, ICIDSM, GasUnie, ICISiemens, WSiemens, Wäärtsila, GErtsila, GEEsso, Shell, Twister BV, SchlumbergerEsso, Shell, Twister BV, SchlumbergerHoogovens (B)Hoogovens (B)Stork-Titan, Damen Shipyards, IHCStork-Titan, Damen Shipyards, IHCBos Kalis Bos Kalis Peutz Akoestiek, NEMPeutz Akoestiek, NEMTNO, ECN, MarinTNO, ECN, MarinPDE-Automotive,Infram, ImtechPDE-Automotive,Infram, ImtechTU/e, RUGTU/e, RUGUT-TS, UT-POF, UT-TW/CiTUT-TS, UT-POF, UT-TW/CiTCalTech, Uni. AucklandCalTech, Uni. Auckland

ASML, PhilipsASML, PhilipsShell, GasUnieShell, GasUnieWärtsilaWärtsilaBoeingBoeingComp. DynamicsComp. DynamicsNLR, ECN, TNO, DLRNLR, ECN, TNO, DLREu. Octrooi Bur.Eu. Octrooi Bur.Uni. of LiverpoolUni. of LiverpoolUni. of New CastleUni. of New CastleShellShellSKFSKFABBABB

30


Finally:Finally:

• Questions??Questions??• Roel Müller: InternshipRoel Müller: Internship• Tijmen Ton: MSc thesis AssignmentTijmen Ton: MSc thesis Assignment• Visit LaboratoryVisit Laboratory

1 UNIVERSITY OF TWENTE DEPARTMENT ENGINEERING TECHNOLOGY Group Engineering Fluid Dynamics...

Documents

Transcript of 1 UNIVERSITY OF TWENTE DEPARTMENT ENGINEERING TECHNOLOGY Group Engineering Fluid Dynamics...