1 Package Contents 2 Device Parts - Brinno · 19/02/2019 · ** Extension pole is not included in...
2
Package Contents 1 2 Device Parts Assembling 3 1. Clamp Head 2. Extension Pole Hole Knob 3. Clamp Head Knob 4. Mounting Hole (1/4”) (x3) 5. Handle 1. Mounting Platform (1/4”) 2. Flex Arm Knob 5 1 1 2 1 1 2 Mount the magic arm onto clamp. Use needle-nose pliers to secure the magic arm. Swivel the handle to release the clamp. Camera Clamp Magic Arm 3 4 Mount the clamp. Tighten it. -1 For tube or flat surface (< 3.5 in (90 mm)) Mount the camera onto the mounting platform. Use needle-nose pliers to secure the camera. 5 Swivel the flex arm knob to adjust the shooting angle. Tighten it. 3 Pull clamp head knob and slide clamp head down. Mount the clamp. Tighten it. -2 Better grasp for flat surface under 2.4 in (60 mm) 3 4 4 2 4 1 1 2 2 Tube Irregular cushion Grooved cushion Flat surface Flat surface
Transcript of 1 Package Contents 2 Device Parts - Brinno · 19/02/2019 · ** Extension pole is not included in...
Package Contents1 2 Device Parts
Assembling3
1. Clamp Head2. Extension Pole Hole Knob3. Clamp Head Knob4. Mounting Hole (1/4”) (x3)5. Handle
1. Mounting Platform (1/4”)2. Flex Arm Knob
5
1
1
2
1
1
2
Mount the magic arm onto clamp.Use needle-nose pliers to secure the magic arm.
Swivel the handle to release the clamp.
Camera Clamp
Magic Arm
3 4
Mount the clamp. Tighten it.
-1 For tube or flat surface (< 3.5 in (90 mm))
Mount the camera onto the mounting platform. Use needle-nose pliers to secure the camera.
5
Swivel the flex arm knob to adjust the shooting angle. Tighten it.
3
Pull clamp head knob and slide clamp head down. Mount the clamp. Tighten it.
-2 Better grasp for flat surface under 2.4 in (60 mm)
3
4
4
2
4
1
12
2
TubeIrregular cushion Grooved cushion
Flat surface
Flat surface
EN_A2 301-0133-00
Camera Clamp KitUser Manual
5 Specifications
Extend Clamping Range4
ACC1000
Camera clamp, magic arm
¼”
Tube: 0.4- 3.5 in (10 - 90 mm)
Flat surface: 0.04- 3.5 in (1 -90 mm)
6.6 lb (3 KG)
Clamp: Stainless, aluminum
Magic Arm: Stainless, metal, aluminum
Model
Contents
26.5 oz (750 g) (included Magic Arm) Weight
Camera Mount Screw
Clamping Range
Magic Arm Load Capacity
Folded: 8.2x 3.7x 1.5 in (209x 94x 39 mm)
Extended: 6.9x 7.1x 2.4 in (176x 180x 60 mm)
110 lb (50 KG) (without extension pole)Clamp Load Capacity
Size (LxWxH)
Materials
For manuals in other languages, visit www.brinno.com/support
The product features, specifications sheets and instructions may differ from actual products. Please refer to Brinno official site for the latest version of user manual.
1
2
Remove the extension pole hole knob.
** Extension pole is not included in BCC2000 package **
Install extension pole.
Extend Clamping Range4
1
** Extension pole is not included in BCC2000 package **
Install extension pole.
2
Remove the extension pole hole knob.Ca
3
4
Pull out the clamp head knob.
Slide the clamp head down to the desired position.Tighten the extension pole hole knob.
4
e the clamp head down to the desired position.Slidhten the extension pole hole knob.Tigh
