1 OMA Location Working Group Update Mike Loushine Senior Scientist / Program Manager Emerging Mobile...
-
date post
19-Dec-2015 -
Category
Documents
-
view
212 -
download
0
Transcript of 1 OMA Location Working Group Update Mike Loushine Senior Scientist / Program Manager Emerging Mobile...
1
OMA Location Working Group Update
Mike LoushineSenior Scientist / Program ManagerEmerging Mobile Technologies Group
Telcordia Applied Research
May 11, 2010 Version 1.0
2
Outline
Disclaimer – This presentation is not an official OMA presentation.
SUPL 3.0 Status
3GPP LPP and OMA LPPe Status
3
Data Gateway: used for SUPL “traffic”
SMS Gateway: used for SUPL service initiation for network initiated SUPL applications
SET - SUPL Enabled TerminalSUPL Server - SUPL Location Platform (SLP)
OMA SUPL High-level Architecture
4
SUPL 3.0 Objectives
Evolve SUPL 2.0 in the following areas Location Support for LTE Improved Location for IP Emergency Calls Improved Location performance Triggered Location Enhancement Improved Indoor Location Accuracy SET to SET Location (Terminal to Terminal) Authentication Enhancements Privacy Enhancements Additional access networks Support for Extended Location Information
5
SUPL 3.0 Status
Highlights of the Requirements (1) The protocol SHALL support IETF “Revised Civic
Location Format for Presence Information Data Format Location Object (PIDF-LO)” [RFC5139] Location info format.
SUPL SHALL support SLP service discovery. SUPL SHALL support delivery of indoor context
information from the SET to the H-SLP. SUPL SHALL support emergency location for
unauthenticated SET.
6
SUPL 3.0 Status
Highlights of the Requirements (2) SUPL SHALL support the conveyance of a location
URI from the SET to the SLP. The SLP MAY use the location URI as an additional source of location information.
SUPL SHALL support extended location information including, for instance, motion state (walking, running, driving, etc.) and SET orientation information.
7
Submit Work Item Supported by 4
voting membercompanies
Submit WID to TP forReview and Approval
Rework definitions
TP assigns WID to WG
Define requirementsfrom use-cases
Generate use-cases Requirements WGreviews requirements
Create Architecturedocument
Create Enablerpackage
Submit CandidateEnabler
Working Group
Architecture
Security
Requirements
InterOp (IOP)
Public Comment
Create test plan Test Fest
Approved Specification
Approve
Approve
Working Group
Architecture
Security
Approve
Work Item Creation
Step 1
Requirements
Step 3
Detailed Technical
Work
Step 4
Validation & IOPStep 5
Assignment to WG
Step 2
SUPL 3.0 Status
RD approved for Candidate Status
Work continues on AD and TS
8
3GPP LPP – LTE Positioning Protocol
Operates on a transaction basis between a target device and a server 3GPP Evolved Packet Solution
Target Device – UE Server – MME
OMA SUPL 2.0 Target Device – SUPL Enabled Terminal (SET) Server – SUPL Location Platform (SLP)
Transaction Types Exchange of positioning capabilities Transfer of assistance data Transfer of location information (positioning
measurements and/or position estimate)
Reference: 3GPP TS 36.305 V1.0.0 (2009-05)
9
LPP Version 1 and 2
UE
eNodeB
S1
eNodeB
S1
MME
E-SMLC
SLs
LTE-Uu
L1
MAC
RLC
PDCP
RRC
LPP
L1
MAC
RLC
PDCP
RRC Relay
L1
L2
IP
SCTP
S1-AP
L1
L2
IP
SCTP
S1-AP
NAS Relay
L1
L2
IP
SCTP
LCS-AP
L1
L2
IP
LCS-AP
LPP
UE eNode B MME LTE Uu S1-MME SLs
SCTP
E-SMLC
L1
MAC
RLC
PDCP
RRC
LPP1
L1
MAC
RLC
PDCP
RRC
L1
L2
IP
SCTP
S1-AP
L1
L2
IP
SCTP
S1-AP
NAS Relay
L1
L2
IP
SCTP
LCS-AP
L1
L2
IP
LCS-AP
LPP2
UE eNode B MME LTE Uu S1-MME SLs
SCTP
E-SMLC
LPP1 LPP2
Reference: 3GPP TS 36.305 V1.0.0 (2009-05)
10
OMA LPPe –Work Areas
AGNSS extensions High accuracy methods including
Precise Point Positioning and Real-Time Kinematics
Atmosphere models, etc. Radio Network-based positioning
extensions Radiomaps for cellular and non-
cellular networks (coverage area models – collection and positioning)
Fingerprinting methods (fingerprint collection and positioning) for cellular and non-cellular access types
SET-based positioning, including: SET based OTDOA and SET based E-CID for LTE and
other access types radio network assistance data
over a broader geographic area Support of other access types
(e.g. Wi-Fi)
SET to SET positioning extensions Compliment (but not duplicate)
service layer support in SUPL 3.0 Extension of existing terrestrial RF
positioning methods to positioning of one SET by other SETs (e.g. a SET measures signals from another SET)
A-GNSS support between SETs – e.g. SET to SET conveyance of assistance data
11
LPP3 Status
Highlights of the Requirements (in development) LPPe SHALL support fixed access types such as Cable, DSL,
LAN, etc. LPPe SHALL support altitude assistance for improved availability
and altitude performance. LPPe SHALL support measurements and assistance for high-
accuracy relative positioning. LPPe SHALL support delivery of indoor context information to the
UE. LPPe SHALL support delivery of indoor context information from
the UE to an appropriate entity in the network.
12
Submit Work Item Supported by 4
voting membercompanies
Submit WID to TP forReview and Approval
Rework definitions
TP assigns WID to WG
Define requirementsfrom use-cases
Generate use-cases Requirements WGreviews requirements
Create Architecturedocument
Create Enablerpackage
Submit CandidateEnabler
Working Group
Architecture
Security
Requirements
InterOp (IOP)
Public Comment
Create test plan Test Fest
Approved Specification
Approve
Approve
Working Group
Architecture
Security
Approve
Work Item Creation
Step 1
Requirements
Step 3
Detailed Technical
Work
Step 4
Validation & IOPStep 5
Assignment to WG
Step 2
LPPe Status
13
Questions? Comments?
Mike Loushine
Senior Scientist / Program Manager
Office: +1 (732) 758-5358
Mobile: +1 (732) 762-0242