1 LGX PATCH PANEL - Data Center and Telecom cables

Fiber TotalCableSolutions.com Total Cable Solutions 888.235.2097 1 LGX PATCH PANEL * Can be purchased FULLY LOADED as pictured P/N: FPP-01-W-10 2019.12.03 Grommeted Non-captive Entry Portals - Protects cables from sharp edges and makes future moves, adds and changes easier Heat Resistant Splice Chip - Installing in a hot climate? Our enhanced splice chip is designed for extreme climates and screws down for a secure connection. PN: ST-PASD-24 ADD-ON ADD-ON Universal Compression Grommet - Replaces zip cords for strain relief providing a secure connection PN: CF-B ADD-ON DIN Rail Kit - Includes two sturdy brackets to mount to standard 35mm DIN Rail PN: FPP-01-W-DINRAIL ADD-ON MORE FEATURES • Space saving panel with ample room for cable routing • Non-captive front and rear entry with protective edges • Rear SC cut-outs - Allows for a wallmount MTP ® cassette or splitter SPECIFICATIONS • Dimensions: 5.56" W x 6.125" H x 1.125" D • Panels: (1) Total Cable Solutions or LGX Adapter Panels (see individual panel capacities) • Fiber Capacity: (12) Splice, (24) Patch • Material: 18 Gauge Steel • Coating: black electrostatic polyester powder coat paint • 4 Cable ties • 1 Splice chip • 2 Rubber cable entry grommets • 4 Cable management clips • 1 Warning label • 1 Port identiﬁcation label WHAT'S INCLUDED

Upload
others
Category

Documents
view
2
download
0

Embed Size (px):

Transcript of 1 LGX PATCH PANEL - Data Center and Telecom cables

Page 1: 1 LGX PATCH PANEL - Data Center and Telecom cables

Fiber

TotalCableSolutions.com Total Cable Solutions 888.235.2097

1 LGX PATCH PANEL

* Can be purchased FULLY LOADED as pictured

P/N: FPP-01-W-10

2019

.12.

Grommeted Non-captive Entry Portals - Protects cables from sharp edges and makes future moves, adds and changes easier

Heat Resistant Splice Chip - Installing in a hot climate? Our enhanced splice chip is designed for extreme climates and screws down for a secure connection. PN: ST-PASD-24

ADD-ON

Universal Compression Grommet - Replaces zip cords for strain relief providing a secure connection PN: CF-B

ADD-ON

DIN Rail Kit - Includes two sturdy brackets to mount to standard 35mm DIN RailPN: FPP-01-W-DINRAIL

ADD-ON

MORE FEATURES• Space saving panel with ample room for cable routing• Non-captive front and rear entry with protective edges• Rear SC cut-outs - Allows for a wallmount MTP® cassette or splitter

SPECIFICATIONS• Dimensions: 5.56" W x 6.125" H x 1.125" D• Panels: (1) Total Cable Solutions or LGX Adapter Panels (see individual panel capacities)• Fiber Capacity: (12) Splice, (24) Patch• Material: 18 Gauge Steel• Coating: black electrostatic polyester powder coat paint

• 4 Cable ties

• 1 Splice chip

• 2 Rubber cable entry grommets

• 4 Cable management clips

• 1 Warning label

• 1 Port identification label

WHAT'S INCLUDED