1 Learning Objectives The Importance Of Company Logos The Importance Of Company Image The Importance Of Packaging / Presentation Rules governing what should appear on packaging. The Significance Of Standards In Industry The Significance of CAD/CAM in Industry Steps In The Manufacture Of The Mini Torch 2 Clean Up All Parts 3 Take A Piece Of Sticky Back Copper 4 Cut To Size Of Patch 10mm x 30mm 5 Remove Backing and Stick to Pad 6 Using Bostik Dont Squeeze The Tube It Will Ooze out on its own 7 Place A Little Glue All Round The Edge 8 Place Middle Section With V Cut Up 9 Place Batteries In Holes Exactly As Shown 10 Take LED Notice One Leg Is Shorter Than The Other 11 Gently Bend Legs As Shown 12 Take A Piece Of Insulating Shrink Tube 13 14 Heat Tube To Cause It To Shrink 15 Place Led In Position Ensure Legs Cross The Batteries 16 Add A Little Glue And Top Nip In Vice Until Set. 17 Torch Vacuum Packaging Aperture Dimensions