1

Chapter 13-14

Wide Area Networks (WANs),

Routing, and Shortest Paths

2

MotivationMotivation

Connect multiple computersSpan large geographic distanceCross public right-of-way

StreetsBuildingsRailroads

3

Building BlocksBuilding Blocks

Point-to-point long-distance connectionsPacket switches (nodes)

Forms a mesh network

4

Packet SwitchPacket Switch

Hardware deviceConnects to

Other packet switchesComputers

Forwards packetsUses addresses

5

Illustration of a Packet Switch

Illustration of a Packet Switch

Special-purpose computer systemCPUMemory I/O interfacesFirmware

6

Building a WANBuilding a WAN

Place one or more packet switches at each site

Interconnect switchesLAN technology for local connectionsLeased digital circuits for long-distance

connections

7

Illustration of a WANIllustration of a WAN

Interconnections depend onEstimated trafficReliability needed

8

Store and ForwardStore and Forward

Basic paradigm used in packet switched networkPacket

Sent from source computerTravels switch-to-switchDelivered to destination

Switch“Stores” packet in memoryExamines packet’s destination address“Forwards” packet toward destination

9

Addressing in a WANAddressing in a WAN

NeedUnique address for each computerEfficient forwarding

Two-part addressPacket switch number Computer on that switch

10

Illustration of WAN Addressing

Illustration of WAN Addressing

Two part address encoded as integerHigher-order bits for switch numberLow-order bits for computer number

11

Next-Hop ForwardingNext-Hop Forwarding

Performed by packet switchUses table of routesTable gives next hop

12

Forwarding Table Abbreviations

Forwarding Table Abbreviations

Many entries point to same next hopCan be condensed (default)Improves lookup efficiency

13

Source of Routing Table Information

Source of Routing Table Information

ManualTable created by handUseful in small networksUseful if routes never change

Automatic routingSoftware creates/updates tableNeeded in large networksChanges routes when failures occur

14

Relationship of Routing To Graph Theory

Relationship of Routing To Graph Theory

GraphNode models switchEdge models connection

15

Shortest Path ComputationShortest Path Computation

Algorithms from graph theoryNo central authority (distributed

computation)A switch

Must learn route to each destinationOnly communicates with directly attached

neighbors

16

Illustration of Minimum Weight Path

Illustration of Minimum Weight Path

Label on edge represents “distance”Possible distance metric

Geographic distanceEconomic costInverse of capacity

Darkened path is minimum 4 to 5

17

Algorithms for Computing Shortest Paths

Algorithms for Computing Shortest Paths

Distance Vector (DV)Switches exchange information in their routing

tablesLink-state

Switches exchange link status informationBoth used in practice

18

Distance VectorDistance Vector

Periodic, two-way exchange between neighbors

During exchange, switch sendsList of pairsEach pair gives (destination, distance)

ReceiverCompares each item in list to local routesChanges routes if better path exists

19

Distance Vector AlgorithmDistance Vector Algorithm

20

Distance Vector IntuitionDistance Vector Intuition

LetN be neighbor that sent the routing messageV be destination in a pairD be distance in a pairC be D plus the cost to reach the sender

If no local route to V or local route has cost greater than C, install a route with next hop N and cost C

Else ignore pair

21

Example of Distance Vector Routing

Example of Distance Vector Routing

Consider transmission of one DV messageNode 2 send to 3, 5, and 6Node 6 installs cost 8 route to 2Later 3 sends update to 66 changes route to make 3 the next hop for

destination 2

22

Link-State RoutingLink-State Routing

Overcomes instabilities in DVPair of switches periodically

Test link between themBroadcast link status message

SwitchReceives status messageComputes new routesUses Dijkstra’s algorithm

23

Example of Link-State Information

Example of Link-State Information

Assume nodes 2 and 3Test link between themBroadcast information

Each node Receives informationRecomputes routes as needed

24

Dijkstra’s Shortest Path Algorithm

Dijkstra’s Shortest Path Algorithm

InputGraph with weighted edgesNode, n

OutputSet of shortest paths from n to each nodeCost of each path

Called Shortest Path First (SPF) algorithm

25

Dijkstra’s AlgorithmDijkstra’s Algorithm

26

Algorithm IntuitionAlgorithm Intuition

Start with self as source nodeMove outwardAt each step

Find node u such that itHas not been consideredIs “closest” to source

Compute Distance from u to each neighbor vIf distance shorter, make path from u go through v

27

Result of Dijkstra’s Algorithm

Result of Dijkstra’s Algorithm

Example routes from node 6To 3, next hop = 3, cost = 2To 2, next hop = 3, cost = 5To 7, next hop = 7, cost = 5To 4, next hop = 7, cost = 8To 5, next hop = 3, cost = 11To 1, next hop = 3, cost = 20

28

Early WAN TechnologiesEarly WAN Technologies

ARPANETHistorically important in packet switchingFast when invented, slow by current standards

X.25Early commercial serviceStill UsedMore popular in Europe

29

Recent WAN TechnologiesRecent WAN Technologies

SMDS (Switched Multimegabit Data Service)Offered by phone companiesNot as popular as Frame Relay

Frame RelayWidely used commercial serviceOffered by phone companies

ATM

30

Asynchronous Transfer Mode ( ATM )

Asynchronous Transfer Mode ( ATM )

Designed by phone companiesSingle technology meant to handle

VoiceVideoData

Intended as LAN or WANGoal: replacement for Internet

31

ATM CharacteristicsATM Characteristics

End-to-end (application to application)Connection-oriented interface:

Establish “connection”Send dataClose connection

Performance guarantees (statistical)Uses cell switching

32

ATM CellATM Cell

Fixed size packet (for highest speed electronics)

Size chosen as compromise between voice (small) and data (large)

5 octet header48 octet payload

Note: size not optimal for any application

33

ATM Cell HeaderATM Cell Header

34

ATM SwitchATM Switch

Building block of ATM networkConnections to

ComputersOther ATM switchesAccepts and forwards cells

35

Cell ForwardingCell Forwarding

Performed directly by hardwareIncoming cell sent to an outgoing interfaceUses label in cellMotivation: highest speed

36

Label SwitchingLabel Switching

ATM connection identified with 24-bit binary value

Known as Virtual Path Identifier / Virtual Channel Identifier (VPI / VCI)

Generically called labelVPI / VCI rewritten at each switch

37

Example of VPI/VCI Rewriting

Example of VPI/VCI Rewriting

38

ATM Quality of ServiceATM Quality of Service

Fine-grained (per connection)Specified when connection establishedEndpoint specifies

Type of data transferThroughput desiredMaximum packet burst sizeMaximum delay tolerated

39

Type of Data TransferType of Data Transfer

Constant Bit Rate (CBR)Example: audio

Variable Bit Rate (VBR)Example: video with adaptive encoding

Available Bit Rate (ABR)Example: data

Unspecified Bit Rate (UBR)Each type has detailed parameters (e.g., mean, max,

burst duration)

40

Sending Data Over ATMSending Data Over ATM

Uses ATM Adaptation Layer (AAL5)Accepts and delivers large, variable-size

packetsAAL5 divides into cells for transmission

Called segmentation and reassembly

41

Assessment of ATMAssessment of ATM

Failed to deliver on promiseSwitches too expensive for LANQoS impossible to implement

42

SummarySummary

Wide Area Networks (WANs)Span long distancesConnect many computersBuilt from packet switchesUse store-and-forward

WAN addressingTwo-part addressSwitch/computer

43

Summary (continued)Summary (continued)

RoutingEach switch contains routing tableTable gives next-hop for destination

Routing tables createdManuallyAutomatically

Two basic routing algorithmsDistance vectorLink state

44

Summary (continued)Summary (continued)

Example WAN technologiesARPANETX.25SMDSFrame RelayATM