1

BFVTRAININGDEVICES

2

Safety: none

Risk assessment: low

Environmental: trash

Evaluation: The student will be evaluated during the gunnery exercise on his proficiency with these devices

3

TERMINAL LEARNING OBJECTIVE

ACTION: Identify Training Devices used for BFV Gunnery.

CONDITIONS: Given operational Training Devices FM 3-22.1, TC 25-8, Installation manuals BFV and

suitable training area.

STANDARDS: Place training devices into operation IAW TC 25-8 and installation manuals.

4

ENABLING LEARNING OBJECTIVE

ACTION: Identify the components of the Laser Target Interface Device (LTID’s)

CONDITIONS: Given a complete set of LTID’s and FM 3-22.1 and TC 25-8.

STANDARDS: Identify the components of the LTID’s IAW TC 25-8 and FM 3-22.1.

5

LASER TARGET INTERFACE DEVICE (LTID)

PURPOSE: TO ENHANCE GUNNERY TRAINING WHEN USING MILES OR PGS

6

7

POWER REQUIREMENTS

2 x 6Vdc (TOTAL 12Vdc) BATTERIES

8

LASER TARGET INTERFACE DEVICE (LTID)

PURPOSE: TO ENHANCE GUNNERY TRAINING WHEN USING MILES OR PGS

DESCRIPTION: THE LASER TARGET INTERFACE DEVICE IS COMPATIBLE WITH THE TARGET LIFTING MECHANISMS. THE LTID CONSISTS OF A DETECTION ASSEMBLY, ELECTRONIC ASSEMBLY, AND A SHOCK GENERATOR MECHANISM

9

PRINCIPLES OF OPERATION (LTIDS)

• RECEIVES LASER CODED MESSAGE AND CONVERTS IT INTO ELECTRICAL PULSES.

10

PRINCIPLES OF OPERATION (LTIDS)

• RECEIVES LASER CODED MESSAGE AND CONVERTS IT INTO ELECTRICAL PULSES.

•COMPARES ELECTRICAL PULSES TO THE WEAPONS CODE AND DETERMINES IF A KILL SIGNAL SHOULD BE PRODUCED.

11

PRINCIPLES OF OPERATION (LTIDS)

• RECEIVES LASER CODED MESSAGE AND CONVERTS IT INTO ELECTRICAL PULSES.

•COMPARES ELECTRICAL PULSES TO THE WEAPONS CODE AND DETERMINES IF A KILL SIGNAL SHOULD BE PRODUCED.

•RESPONDS TO THE PROCESSED ELECTRICAL PULSE BY REPLICATING THE SHOCK OF A PROJECTILE STRIKING THE TARGET

12

DETECTION ASSEMBLY

• MILES DETECTOR BELT

13

DETECTOR ASSEMBLY

14

DETECTION ASSEMBLY

• MILES DETECTOR BELT

•RECEIVES AND CONVERTS CODED LASER SIGNALS INTO ELECTRICAL PULSES

15

DETECTION ASSEMBLY

• MILES DETECTOR BELT

•RECEIVES AND CONVERTS CODED LASER SIGNALS INTO ELECTRICAL PULSES

•RELAYS PULSES TO ELECTRONICS ASSEMBLY

16

DETECTION ASSEMBLY

• MILES DETECTOR BELT

•RECEIVES AND CONVERTS CODED LASER SIGNALS INTO ELECTRICAL PULSES

•RELAYS PULSES TO ELECTRONICS ASSEMBLY

•ATTACHES TO TARGET WITH VELCRO.

17

ELECTRONIC ASSEMBLYCONTROLS

18

ELECTRONICS ASSEMBLY

•COMPARES ELECTRICAL PULSES TO THE WEAPON CODE

19

ELECTRONICS ASSEMBLY

•COMPARES ELECTRICAL PULSES TO THE WEAPON CODE

•DETERMINES IF A KILL SIGNAL SHOULD BE PRODUCED

20

ELECTRONICS ASSEMBLY

•COMPARES ELECTRICAL PULSES TO THE WEAPON CODE

•DETERMINES IF A KILL SIGNAL SHOULD BE PRODUCED

•SENDS SIGNAL TO SHOCK GENERATOR MECHANISM

21

ELECTRONICS ASSEMBLY

•COMPARES ELECTRICAL PULSES TO THE WEAPON CODE

•DETERMINES IF A KILL SIGNAL SHOULD BE PRODUCED

•SENDS SIGNAL TO SHOCK GENERATOR MECHANISM

•BATTERY OPERATED

22

ELECTRONICS ASSEMBLY

•COMPARES ELECTRICAL PULSES TO THE WEAPON CODE

•DETERMINES IF A KILL SIGNAL SHOULD BE PRODUCED

•SENDS SIGNAL TO SHOCK GENERATOR MECHANISM

•BATTERY OPERATED

•HAS SELECTOR TO SET SYSTEM FOR APPROPRIATE TARGET AND RANGE

23

ELECTRONIC ASSEMBLYCONTROLS (CONT)

24

ELECTRONIC ASSEMBLYCONTROLS (CONT)

25

ELECTRONIC ASSEMBLYCONTROLS (CONT)

1. LOW BATTERY INDICATOR

2. RANGE, Select (Rotary Switch)

OFFBATTERY TEST0 KM TO 1 KM1 KM TO 2 KM2 KM TO 4 KM

3. TARGET TYPE (Rotary Switch)

INFANTRY TARGETSTHIN SKIN TARGETSARMORED TARGETS

26

SHOCK GENERATOR MECHANISM

•RESPONDS TO THE ELECTRICAL PULSE FROM THE ELECTRONICS ASSEMBLY

27

SHOCK GENERATOR MECHANISM ASSEMBLY

28

SHOCK GENERATOR MECHANISM

•RESPONDS TO THE ELECTRICAL PULSE FROM THE ELECTRONICS ASSEMBLY

•ACTIVATES MECHANICAL SOLENOID

29

SHOCK GENERATOR MECHANISM

•RESPONDS TO THE ELECTRICAL PULSE FROM THE ELECTRONICS ASSEMBLY

•ACTIVATES MECHANICAL SOLENOID

•REPLICATES THE SHOCK OF A PROJECTILE STRIKINGTHE TARGET

30

SHOCK GENERATOR MECHANISM

•RESPONDS TO THE ELECTRICAL PULSE FROM THE ELECTRONICS ASSEMBLY

•ACTIVATES MECHANICAL SOLENOID

•REPLICATES THE SHOCK OF A PROJECTILE STRIKINGTHE TARGET

•POSITIONED ON THE TARGET LIFTING MECHANISMSENSOR

31

COMPONENTS OF THE LTIDS(CONSOLIDATED)

32

THRU-SIGHT VIDEO(TSV)

33

ENABLING LEARNING OBJECTIVE

ACTION: Identify the components of the Thru Sight Video System.

CONDITIONS: In a classroom environment, Given a operational Thru Sight Video System and the Installation

Manual.

STANDARDS: Identify each component of the Thru Sight Video IAW the installation manual.

34

MASTER GUNNER COURSE

35

MASTER GUNNER COURSE

36

MASTER GUNNER COURSE

37

MASTER GUNNER COURSE

38

MASTER GUNNER COURSE

39

MASTER GUNNER COURSE

40

MASTER GUNNER COURSE

41

MASTER GUNNER COURSE

42

MASTER GUNNER COURSE

43

MASTER GUNNER COURSE

44

TARGETRY

45

Enabling Learning Objective

Action: Determine target dimensions and Thermal placement.

Conditions: In a classroom environment with an overhead projector with slides and TC 25-8.

Standards: Explain the different target dimensions and thermal placement IAW TC 25-8.

46

MASTER GUNNER COURSE

47

MASTER GUNNER COURSE

48

MASTER GUNNER COURSE

49

BFVTRAININGDEVICES