1-6940 GB 2009 4 - Parcol - homeparcol.com/test/docs/1-6940_GB.pdfSA 193 B16 SA 479 XM-19 3 BODY...

PARCOL

A - 1

VeGAVeGAVeGAVeGA

CONTROL VALVE1-6940 and 1-4640

SERIES

Section A – General Description

A - 2

PARCOL

A - 3

TABLE OF CONTENTS SECTION A – GENERAL DESCTIPTION

MAIN FEATURES GENERAL DATA BASIC RATINGS NUMBERING SYSTEM MATERIALS OF CONSTRUCTION BALANCING SEAL INSERTS VALVE DIMENSIONS MASSES OPTIONS SUGGESTED SPARE PARTS SPECIAL TOOLS

SECTION B – TECHNICAL TABLES CV, FL , XT VERSUS TRAVEL

SECTION C – TECHNICAL TABLES PRESSURE DROP TABLES

VeGA is the most Versatile control valve for General Applications ever designed by Parcol. VeGA is a straight body single seat control valve with cage guided balanced plug designed to withstand the most severe process conditions; the flow is mainly controlled by the special drilled cage, which acts as a continuous and full plug guide along the whole valve travel. The special plug design allows improving valve rangeability by reducing minimum controllable flow and plug erosion. The high pressure recovery factor value compared with conventional Contoured plug control valves ensure higher flow rates on compressible fluid service and reduces cavitation risk and effects on liquid service.

All versions have quick change trim with internal spring to extend the quick change design up to maximum working temperature. Together with the standard high capacity trim, low noise trims and double cage trims are available respectively for critical service on compressible fluids (gas and vapor) and for high differential pressures or for cavitating service where higher pressure recovery factor values are required. Balanced Plug with Pilot execution allows to comply with IEC sealing class V up to 566°C for compressi ble fluids service. “Flow to close” configuration improves seat ring protection and increases seating force making this solution particularly reliable. For uncompressible fluids service, a special C-ring metallic seal is available to comply with IEC sealing class V without practical temperature limitations. Contoured unbalanced plugs are available on request up to DN 4” for dirty fluids service. Bonnet style, finned and partially extended is specially designed to comply with all working conditions. A special material configuration is available to comply with NACE MR0175 and MR0103 standards. VeGA control valves are usually equipped with Parcol diaphragm spring return pneumatic actuators 1-X-210 and 1-X-250 series (pneumatic cylinders 1-X-400 series for DN 16” and over). Electrical or hydraulic actuators are available on request.


A - 4

MAIN FEATURES - Wide range of sizes: from DN 3/4” to DN 24” ; - Ratings from ANSI 150 up to ANSI 2500 (B10 to B100 for EN ratings); - Wide operating temperature range (-75 °C to 566 °C, -196°C with optional extended bonnet); - Quick change design up to maximum allowed working temperature; - High flow capacity thanks to optimized body shape design; - High rangeability thanks to CCF plug design; - Sealing class V IEC 60534-4 extended up to 566 °C f or balanced plug with pilot (“flow to close” for compressible fluid

applications) or metal C-ring seal for all applications; - Unbalanced Contoured plug version available up to DN 4” for dirty fluids service; - Soft seat ring insert, to comply with IEC 60534-4 leakage class VI; - Finned-partially extended bonnet shape, to comply with all working temperatures.

GENERAL DATA BODY

- Type: globe, straight way single port. Angle body version 1-4640 series is available on request - Construction: cast - Materials: wide material selection (from ASME and EN standards) is available, according to material tables. Other materials

are available on request - Sizes: 3/4” through 24" - Connections:

o ANSI, EN flanged o BW ANSI B16.25 o UNI EN 12627 butt welding ends o Socket welding up to NPS 2”

- Ratings: according to EN 12516-1 and ASME B16.34 materials o PN 10/16/25/40/63/100 o ANSI 150/300/600 up to DN 24”, ANSI 900/1500 (up to DN 12”), ANSI 2500 (up to DN 4”)

FLOW DIRECTION Flow over the plug on 1-6948 (balanced with pilot). Flow under the plug on 1-6941, 1-6942 and 1-6943.

BONNET - Type: partially extended, finned. With bellows seal or extension bonnet for low temperature service (< -75 °C) on request - Constructions: flanged type, cast or forged - Materials: same as body - Low Emission certified packings are available on request

PLUG - Sizes: full or reduced ports as per Cv table - Type:

o Balanced and unbalanced, cage guided: port 1/2” to 24”, for 1-6943 and 1-6948 series o Contoured unbalanced: up to DN 4” , for 1-6941 and 1-6942 series

- Materials: see table of materials

FLOW CHARACTERISTIC - Linear (also suitable for on-off service) - Equal percentage

SEAT - Mounting: free fitted in the body without screwing or forcing. Centered in the cage granting alignment with the plug, body and

seat. Coupling sealed by means of a flat gasket - Materials: see table of materials

CAGE - Constructions: rolled or forged cylinder, drilled or V-ported, tightened between body and bonnet - Materials: see table of materials

STEM PACKINGS - TFK: PTFE aramid fibers reinforced packing up to 250°C – 150 bar - GRF: Pure flexible graphite packing without practical temperature limitation (max 450 °C in presence o f oxidizing fluids) - TFP: Pure PTFE packing (suitable for oxygen service) up to 200°C – 150 bar

SPECIAL EXECUTIONS SUPPLIED AS OPTION - Double packing with leak off lateral connection Live Loading System with Belleville Springs - Low Emission Certified Packings - Sand protection For further details see Parcol technical Bulletin 1-VII.

LEAKAGE CLASSES In accordance with IEC 60534-4 leakage classes, up to class VI for both balanced and unbalanced construction up to maximum admissible working temperatures. Special sealing class (HS) for erosive/corrosive fluids applications with higher seating forces is available.

PARCOL

A - 5

BASIC RATINGS

Availability RATING

ANSI 150 300 600 900 1500 2500 ANSI 150 300 600 900 1500 2500

PN 10/16 15/40 63/100 PN 10/16 15/40 63/100 DN DN 3/4 " ■ ■ ■ ■ ■ ■ 8" ■ ■ ■ ■ ■ 1" ■ ■ ■ ■ ■ ■ 10" ■ ■ ■ ■ ■

1.1/2" ■ ■ ■ ■ ■ ■ 12" ■ ■ ■ ■ 2" ■ ■ ■ ■ ■ ■ 14" ■ ■ ■ 3" ■ ■ ■ ■ ■ ■ 16" ■ ■ ■ (1) 4" ■ ■ ■ ■ ■ ■ 20" ■ ■ ■ 6" ■ ■ ■ ■ ■ (1) 24" ■ ■ ■

(1) ON REQUEST

NUMBERING SYSTEM


A - 6

MATERIALS OF CONSTRUCTION

VeGA 1-6941 Control Valve Contoured Plug

Carbon and CrMo Steels Stainless Steels NACE

Temp. Range Item Description

-29 ÷ +427°C -29 ÷ +566°C -29 ÷ +566°C -196 ÷ +343° C -196 ÷ +343°C -29 ÷ +427°C -196 ÷ +343°C

1 BODY SA 216 WCC EN GP240GH

SA 217 WC9 EN G17CrMo9-10 SA 217 C12A SA 351 CF8M

EN GX5CrNiMo19-11-2 SA 351 CF3M

EN GX2CrNiMo19-11-2 SA 216 WCC HRC22 max

SA 351 CF8M HRC22 max

SA 216 WCC SA 217 WC9 SA 217 SA 351 CF8M SA 351 CF3M SA 216 WCC HRC22 max

SA 351 CF8M HRC22 max 2 BONNET

SA 105 SA 182 F22 cl.3 SA 182 F91 SA 479 316 SA 479 316L SA 105 HRC22 max SA 479 316 HRC22 max SA 193 B16 SA 479 XM-19 3 BODY STUD SA 193 B7

SA 479 XM-19 SA 479 XM-19

SA193 B7 SA 193 B7 SA 479 XM-19

SA 194 gr.8 4 NUT SA 194 gr.4 SA 194 gr.8 SA 194 gr.4

SA 194 gr.4 SA 194 gr.8

A479 316 - A 479 316

A 479 316L

A 479 316 22HRC

A 182 F6NM Nitrided A 182 F6NM HRC 22max nitrided

- 51 PLUG

A479 316 +Stellite gr.6

- - A 479 316+ Stellite gr.6 A 479 316L+ HVD1

A 479 316 22HRC +Stellite

A479 316 A 479 316 22HRC AISI 400 series hardened

A 479 316

A 479 316L

A479 316+Stellite - - A 182 F6NM

HRC 22max nitrided - 6 SEAT

A182 F6NM+Stellite A 479 316 + Stellite gr.6 A 479 316L + HVD1

A 479 316 22HRC +Stellite 7 STEM•• A 479 316 A 479 XM-19 A 479 316 A 479 316L A 479 316 HRC22 max

8 - 14 GASKET• AISI 321 + GRAPHITE

9 GUIDE A 182 F6NM Nitrided A 479 316L Cr plated A 182 F6NM HRC22 max

Nitrided

A 479 316 HRC22 max

Cr plated 19 INSERT PTFE 12 PIN A 479 304 A 479 316L A 479 304 HRC 22 max

TFK - aramid fibres reinforced PTFE rings GRF - Pure flexible graphite rings 27 PACKING●

TFP - Pure PTFE rings 36 BELLOW AISI 316L 37 EXTENSION A 479 316 A 479 XM-19 A 479 316 A 479 316L A 479 316 HRC22 max

44 BELLOW CHAMBER

SA 105 SA 182 F22 SA 182 F91 SA 479 316 SA 479 316L SA 105 HRC 22Max

SA 479 316 HRC 22Max

45 ANTIROT.SCR. AISI 316L 46 GASKET AISI 321 + GRAPHITE

251 PLUG AISI 316L

1 Available also soft seat version for sealing class VI • Suggested as spare part for commissioning and start-up •• Suggested as spare part for for the first two years

1-6941 Seal Insert for Leackage Class VI

Port size : ø12mm ÷÷÷÷ 4”

PARCOL

A - 7

VeGA 1-6942 Control Valve Contoured Integral Plug, Stem Guided

Carbon Steels Stainless Steels NACE Temperature Range Item Description

-29 ÷ +427°C -196 ÷ +343°C -196 ÷ +343°C -29 ÷ +427 °C -29 ÷ +343°C


SA 351 CF8M EN GX2CrNiMo19-11-2


SA 216 WCC HRC22 max


2 BONNET SA 105 SA 479 316 SA 479 316L SA 105 22HRC max SA 479 316 22HRC max

-196<T<-29: SA 479 XM19 3 BODY STUD SA 193 B7 -29<T<343: SA 193 B7

SA 193 B7 SA 479 XM19

-196<T<-29: SA 194 gr.8 4 NUT SA 194 gr.4 -29<T<343: SA 194 gr.4

SA 194 gr.4 SA 194 gr.8

A 479 316 SA 479 316 A479 316L A 479 316 22HRC max A479 316L+HVD1 5

PLUG and

STEM •• A 479 316 + Stellite gr.6 A 479 316 + Stellite gr.6 HVD1

A 479 316 22HRC max + Stellite gr.6

A 479 316 A 479 316 A 479 316L A 479 316 22HRC max A479 316L+HVD1 6 SEAT••

A 479 316 + Stellite gr.6 A 479 316 + Stellite gr.6 HVD1

A 479 316 22HRC max + Stellite gr.6

8 - 14 GASKET• AISI 321 + GRAPHITE HASTELLOY C276 9 GUIDE BUSHING S21800 S21800

HVD1 annealed S 21800

10 CAGE A 105 A 479 316L A105 HRC22 max A479 316L HRC22 max TFK - aramid fibres reinforced PTFE

GRF - Pure flexible graphite 27 PACKING● TFP – Pure PTFE

VeGA 1-6942

VeGA 1-6941

• Suggested as spare part for commissioning and start-up •• Suggested as spare part for for the first two years


A - 8

VeGA 1-6943 Control Valve Carbon and CrMo Steels Stainless Steels NACE

Temperature Range Item Description

-29 ÷ +427°C -29 ÷ +566°C -29 ÷ +566°C -196 ÷ +343°C -196 ÷ +343°C -29 ÷ +427°C -196 ÷ +34 3°C


SA 217 WC9 EN G17CrMo9-10

SA 217 C12A SA 351 CF8M

EN GX5CrNiMo19-11-2


SA 216 WCC HRC22 max


SA 216 WCC SA 217 WC9 SA 217 C12A SA 351 CF8M SA 351 CF3M SA 216 WCC HRC22 max

SA 351 CF8M HRC22 max 2 BONNET

SA 105 SA 182 F22 cl.3 SA 182 F91 SA 479 316 SA 479 316L SA 105 HRC22 max

SA 479 316 HRC22 max

SA 193 B16 SA 479 XM-19 3 BODY STUD SA 193 B7 SA 479 XM-19

SA 479 XM-19 SA 193 B7

SA 193 B7 SA 479 XM-19

SA 194 gr.8 4 NUT SA 194 gr.4 SA 194 gr.8 SA 194 gr.8 SA 194 gr.4

SA 194 gr.4 SA 194 gr.8

A 479 316 A 479 316L

A 479 316L A 479 316 HRC22 max 5 PLUG•• A 182 F6NM Nitrided

A 479 316 + Stellite gr.6

A 479 316L + HVD1

A 182 F6NM HRC22 max

Nitrided A 479 316 HRC22 max + Stellite gr.6

AISI 400 series hardened - A 479 316

For DN ≤ 3": A 479 316+Stellite gr.6 A 479 316L A 479 316L

DN ≤ 3": A 479 316 HRC22 max +

Stellite gr.6

A 479 316 HRC22 max

6 SEAT••

For DN> 3": A 182 F6NM + Stellite gr.6 A 479 316+ Stellite gr.6

A 479 316L+HVD1

DN > 3": A 182 F6NM HRC22 max

+Stellite gr.6

A 479 316 HRC22 max +

Stellite gr.6 7 STEM•• A 479 316 A 479 XM-19 A 479 316 A 479 316L A 479 316 HRC22 max

8 -14-16 GASKET♦ AISI 321 + GRAFITE

9 CAGE A 351 CA6NM Nitrided A 479 316 Cr plated

A 479 316L Cr plated

A 182 CA6NM HRC22 max

Nitrided

A 479 316 HRC22 max Cr

plated 10 DISC SPRING INCONEL 718 Hardened

11 ADAPTER A 105 A 182 F22 A 479 316L A 105 HRC22 max

A 479 316L HRC22 max

12 PIN A 479 304 A 479 304 HRC 22Max 13 SPACER RING A 479 316L A 479 316L HRC22 max

15-18 SPACER A 105 A 182 F22 A 182 F316L A 105 HRC22 max

A 479 316L HRC22 max

TFK - aramid fibres reinforced PTFE GRF - Pure flexible graphite 27 PACKING♦

TFP – Pure PTFE

♦ Suggested as spare part for commissioning and start-up •• Suggested as spare part for for the first two years

PARCOL

A - 9

VeGA 1-6943 Control Valve Cage Guided


A - 10

VeGA 1-6943 Seat Leakage Availability And Balancing Seal Inserts

Sealing

config. code Description Temp. range Port size Max leakage class

N Non balanced as for mat. class 1/2"÷6" V

D Energized carbon graphite rings -29 ÷ +566°C 1 1/2"÷24" IV

E Bronze loaded PTFE ring energized with O-ring -29 ÷ +180°C 1 1/2"÷24" IV S1

C Carbon graphite rings energ. wt flexible graphit + back seal -29 ÷ +566°C 2"÷24" IV S1

R Metallic C-ring balanced plug -29 ÷ +566°C 1/2"÷24" V met

allic

sea

t

S Graphite loaded pressure energized PTFE ring -29 ÷ +200°C 1 1/2"÷24" V

P Soft Seat, non balanced plug -20 ÷ +200°C 1/2"÷6" VI

soft

seat

U Soft Seat, balanced plug (Graph. loaded pressure energ. PTFE ring) -20 ÷ +200°C 1 1/2"÷24" VI

Insert code D E C R S P

Item Description 19 INSERT - - - - - PTFE 32 SEAL RING - - - - Graph. loaded PTFE - 46 ENERGIZER A 182 F6NM Hard. - - - - - 47 SEAL RING Carbon graphite - Carbon graphite - - - 48 BACK SEAL - - Flexible graphite - - - 49 ROD SEAL A 182 F6NM Hard. - A 182 F6NM Hard. A 182 F6NM Hard. - - 51 O-ring - Fluoroelastomer - - - - 52 SEAL RING - Bronze loaded PTFE - - - -

110 SEAL RING - - - INCONEL X 750 silver plated - -

112 SCREW - - - A 479 316 - - 114 WASHER - - - A 479 304 - -

VeGA 1-6943 Seal Inserts

Soft Seat Insert

Used for code P and U

Sealing Class VI

Energized Carbon Graphite Rings

Used for code D

Max sealing class: IV

PARCOL

A - 11

VeGA 1-6943 Balancing Seal Inserts

Bronzed PTFE Ring

Used for code E

Max sealing class: IV s1

Carbon Graphite Rings and Back Seal

Used for code C

Max sealing class: IV s1

Metallic C-ring

Used for code R

Max sealing class: V

Pressure Energized PTFE Ring

Used for code S and U

Max sealing class: VI


A - 12

VeGA 1-6948 Control Valve(1)

Carbon and CrMo Steels Stainless Steels Temperature Range

Item Description -29 ÷ +427°C -29 ÷ +566°C -29 ÷ +566°C -196 ÷ +343°C -196 ÷ +343°C

1 BODY SA 216 WCC GP240GH

SA 217 WC9 G17CrMo9-10 SA 217 C12A SA 351 CF8M

EN GX5 CrNiMo19-11-2 SA 351 CF3M

EN GX2 CrNiMo19-11-2 SA 216 WCC SA 217 WC9 SA 217 C12A SA 351 CF8M SA 351 CF3M 2 BONNET

SA 105 SA 182 F22 SA182 F91 SA 479 316 SA 479 316L SA 193 B16 SA 479 XM-19 3 BODY STUD SA 193 B7

SA 479 XM-19 SA 479 XM-19

SA 193 B7 SA 194 gr.8 4 NUT SA 194 gr.4 SA 194 gr.8 SA 194 gr.4

5 PLUG•• A 182 F6NM Nitrided A 479 316 + Stellite gr.6 A 479 316L + HVD1 AISI 400 series hardened - - DN ≤4" : A 479 316 + Stellite gr.6 6 SEAT•• - DN >4": A 182 F6NM + Stellite gr.6

A 479 316 + Stellite gr.6 A 479 316L + HVD1

A 479 316 7 STEM•• A 479 316 A 479 XM-19

A 479 XM-19 A 479 316 A 479 316L

8 - 14 GASKET♦ AISI 321 + GRAFITE 9 CAGE A 351 CA6NM Nitrided A 479 316L Cr plated 10 DISC SPRING INCONEL 718 Hardened 12 PIN A 479 304 18 SPACER A 105 A 182 F22 A 192 F91 A 479 316L

TFK - aramid fibres reinforced PTFE GRF - Pure flexible graphite 27 PACKING♦

TFP - Pure PTFE 28 SCREW A 479 304 29 WASHER SA 479 304 Annealed 30 FLANGE A 182 F6NM Hardened A 479 316 A 479 316L 31 PILOT A 182 F6NM + Nitrided A 479 316L + Stellite gr.6 32 SPRIG INCONEL X750 TTT 49 SEAL RING♦ A 182 F6NM Hardened A 479 316L

♦ Suggested as spare part for commissioning and start-up •• Suggested as spare part for for the first two years (1)Balanced plug with pilot 1-6948 series control valves are specifically designed for service on compressible fluids

PARCOL

A - 13

VeGA 1-6948 Control Valve Plug with Pilot


A - 14

VALVES DIMENSIONS2

Dimension A

FLANGED & BW SW & SCREWED

ANSI 150 ANSI 300 ANSI 600 ANSI 900 ANSI 1500 ANSI 2500 ANSI DN RF RJ BW RF RJ BW RF RJ BW RF RJ BW RF RJ BW RF RJ BW 300 600

3/4" 184 - 206 194 207 206 206 206 206 273 273 279 273 273 279 318 318 318 - - 1" 184 197 210 197 210 210 210 210 210 273 273 279 273 273 279 318 318 318 - -

1.1/2" 222 235 251 235 248 251 251 251 251 333 333 330 333 333 330 381 384 359 251 251 2" 254 267 286 267 283 286 286 289 286 375 378 375 375 378 375 413 416 400 286 286 3" 298 311 337 317 333 337 337 340 337 441 444 460 460 463 460 660 666 498 4" 352 365 394 368 384 394 394 397 394 511 514 530 530 533 530 737 747 575 6" 451 464 508 473 489 508 508 511 508 714 717 768 768 774 768 8" 543 556 610 568 584 610 610 613 610 781 784 832 838 848 832

10" 673 686 752 708 724 752 752 755 752 864 867 991 991 1001 991 12" 737 750 819 775 791 819 819 822 819 1016 1019 1130 1130 1146 1130 14" 889 902 1029 927 943 1029 972 975 1029 16" 1016 1029 1108 1057 1073 1108 1108 1111 1108 on request 20" 1278 1291 1420 1320 1333 1420 1400 1413 1460 24" 1680 1693 1680 1724 1746 1724 1800 1809 1800

Dimension B Dimension C3

ANSI ANSI DN 150 300 600 900 1500 2500 150 300 600 900 1500 2500

3/4" 70 70 70 85 85 90 188 188 188 218 218 238 1" 70 70 70 85 85 90 188 188 188 218 218 238

1.1/2" 100 100 100 110 110 120 250 250 250 280 280 320 2" 122 122 122 135 135 150 290 290 290 310 310 340 3" 150 150 150 170 170 180 330 330 330 340 340 370 4" 160 160 160 200 200 220 380 380 380 400 400 430 6" 290 200 205 210 222 430 430 430 460 460 8" 200 200 220 220 230 480 480 480 520 520

10" 258 258 265 310 335 620 620 620 670 670 12" 290 290 300 330 370 710 710 710 760 760 14" 350 360 380 780 780 780 16" 370 380 410 on request 910 910 910 on request 20" 490 500 520 1060 1060 1060 24" 550 560 570 1330 1330 1330

2 Dimensions in mm. See following page drawings for dimensions positioning. 3 Approximate value, for more accurate value contact Parcol

PARCOL

A - 15

Diaphragm Actuator with side hand-

wheel

1-6940 VeGA valve with diafragm actuator

4 See Parcol Actuators bulletins 1-X210, 1-X250 and 1-X400 for further information

1-X-210 Diaphragm Series4 D TYPE

Direct Reverse E ΦΦΦΦF S

D250 400 460 130 265 300 D310 412 494 150 325 300 D390 511 662 200 400 360 D450 584 750 250 482 365 D600 754 954 300 631 455


A - 16

D63 Series Diaphragm Actuator D63 Hand-wheel front view D63 Hand-wheel side view

1-X-250 Diaphragm Series D D63 TYPE

Direct Reverse E φφφφF S

Standard 985 1022 350 640 - With side handwheel 1211 1248 350 640 365

stroke ≤120mm

With H.M.O. 1385 1422 350 640 905 Standard 1370 1407 450 640 -

With side handwheel 1686 1723 450 640 365 stroke

>120mm With H.M.O. 1870 1907 450 640 905 1-X-400 Cylinder Series

C450 1767 2107 450 565 - With side hand-wheel 2245 2585 450 565 350

C600 1841 2130 450 730 - With side hand-wheel 2319 2670 450 730 350

D63 actuator with Hydraulic Manual Operator (H.M.O.) with damping functions

1-X-400 series Pneumatic Cylinder Actuators

PARCOL

A - 17

MASSES5

PARCOL Actuators6 Handwheel (to be added)

SERIES TYPE Direct Reverse Side Top

1-X-210 D250 15 16 +10 +6 1-X-210 D310 16 19 +10 +6

1-X-210 D390 29 39 +19 +15 1-X-210 D450 48 63 +19 +15 1-X-210 D600 98 130 +13 -

stroke≤120mm 185 215 +40 both fo hadwheel and HMO 1-X-250 D63

stroke>120mm 220 250 +60 both fo hadwheel and HMO 1-X-400 C450 540 650 1-X-400 C600 1016 1156

VeGA valves Flanged BW

ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI A NSI DN

150 300 600 900 1500 2500 300 600 900 1500 2500 3/4" 16 22 22 30 30 38 21 15 28 28 31

1" 16 22 22 30 30 38 21 15 28 28 31

1.1/2" 41 43 46 60 60 54 41 43 55 55 44

2" 49 60 63 102 102 143 57 60 93 93 129

3" 74 94 100 180 180 340 88 94 170 164 311

4" 119 120 135 260 260 500 111 121 243 236 457

6" 198 250 300 420 560 256 273 384 507

8" 310 345 432 680 980 322 392 620 897

10" 470 576 789 1200 1700 543 726 1120 1562

12" 677 805 789 1580 2250 760 719 1468 2021

14" 960 1240 1650 1182 1572

16" 1416 1700 2100 on request 1628 1987 on request

20" 2256 3300 3900 3265 3728

24" 2916 4100 5000 4056 4780

5 Masses in kg 6 See Parcol Actuators bulletins 1-X-210, 1-X-250 and 1-X-400 for further information


A - 18

OPTIONS - Cleaning for Oxygen Service - Reducers - Electric or hydraulic actuators - Special materials - Body drain connections - Special tools

SUGGESTED SPARE PARTS

Components suggested as spare parts for commissioning and start-up7:

- body gaskets - packing - soft balancing inserts (PTFE / Graphite)

Two years suggested spare parts8:

- plug - seat - stem - metallic balancing inserts - electrical accessories (2% per type)

SPECIAL TOOLS (provided as options)

- blow out - blow through/flushing - pressure testing kit - acid washing kit - special trim for blowing

7 See also part list where ● 8 See also part list where ●●

PARCOL

A - 19

PARCOL S.p.A. Via Isonzo, 2 – 20010 CANEGRATE (MI) – ITALY TELEPHONE: +39 0331 413 111 – FAX: +39 0331 404 215 E-mail: [email protected] – http://www.parcol.com

Issue 04-2009 ACA 0337/A

VEGA 1-6940 SERIES CAGE CONTROL VALVES SECTION B

– CV, FL, XT VERSUS TRAVEL TABLES

Section B – Cv, FL, xT versus travel tables

B-2

SECTION A – GENERAL DESCTIPTION SECTION B – TECHNICAL TABLES

CV, FL , XT VERSUS TRAVEL Page

1-6941 and 1-6942 Type: Contoured Plug – Flow to Op en - CP-L Flow To Open Linear flow characteristic(1) 3 - CP-E Flow To Open Equal percentage flow characteristic 4 1-6943 Type: Standard Series – Flow to Open

- HC-L High Capacity Linear flow characteristic 5 - HC-E High Capacity Equal percentage flow characteristic 6 - LN-L Low Noise Linear flow characteristic 7 - LN-E Low Noise Equal percentage flow characteristic 8 - XLN-L Special Low Noise Linear flow characteristic 9 - XLN-E Special Low Noise Equal percentage flow characteristic 10 - DC-L Double Cage Linear flow characteristic 11 - DC-E Double Cage Equal percentage flow characteristic 12 - EDC-L Double Cage with Expansion Linear flow characteristic 13 - EDC-E Double Cage with Expansion Equal percentage flow characteristic 14 1-6948 Type: Balanced with Pilot - Flow to Close

- PLN-L Low Noise Linear flow characteristic 15 - PLN-E Low Noise Equal percentage flow characteristic 15 - PXLN-L Special Low Noise Linear flow characteristic 16 - PXLN-E Special Low Noise Equal percentage flow characteristic 16

SECTION C – TECHNICAL TABLES

PRESSURE DROP TABLES (1)For on off services linear plug is provided

PARCOL

B - 3

VeGA valve 1-6941 Type - Cv FL xT

CP-L Trim type: Contoured plug flow to open Flow characteristic: LINEAR

TRAVEL % DN [in]

Port [mm]

Plug type (1)

ΦΦΦΦ Seat [mm]

Travel [mm] 5% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

Press. rec. factor F L 0.98 0.97 0.97 0.96 0.96 0.95 0.95 0.94 0.94 0.93 0.93 Press. diff. ratio fact. x T 0.91 0.89 0.86 0.84 0.82 0.79 0.77 0.75 0.73 0.71 0.68

0.007 0.009 0.014 0.018 0.023 0.027 0.032 0.036 0.041 0.045 0.05 Ø3 F 3 17 0.007 0.011 0.019 0.026 0.034 0.042 0.049 0.057 0.065 0.072 0.08 0.01 0.016 0.029 0.042 0.054 0.067 0.079 0.092 0.1 0.12 0.13 Ø4 F 4 17 0.01 0.019 0.038 0.057 0.076 0.095 0.11 0.13 0.15 0.17 0.19

0.018 0.032 0.061 0.09 0.12 0.15 0.18 0.2 0.23 0.26 0.29 0.018 0.038 0.078 0.12 0.16 0.2 0.24 0.28 0.32 0.36 0.4

1/2

3/4

1

Ø6 F 6 17 0.024 0.054 0.11 0.18 0.24 0.3 0.36 0.42 0.48 0.54 0.6

VeGA valve 1-6941 and 1-6942 Type - Cv FL xT


TRAVEL % DN [in]

Port [mm]

Plug type (1)

ΦΦΦΦ Seat [mm]

Travel [mm] 5% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%


Ø6 C 6 17 0.018 0.07 0.17 0.28 0.38 0.49 0.59 0.69 0.8 0.9 1 0.04 0.13 0.3 0.47 0.64 0.81 0.98 1.2 1.3 1.5 1.7 Ø9 C 9.05 17 0.04 0.17 0.43 0.69 0.96 1.2 1.5 1.7 2 2.3 2.5

1/2 3/4 1

Ø12 C 12.05 17 0.06 0.27 0.68 1.1 1.5 1.9 2.3 2.8 3.2 3.6 4



TRAVEL % DN [in]

Port [in]

ΦΦΦΦ Seat [mm]

Travel [mm] 5% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

Press. recovery factor F L 0.97 0.97 0.96 0.96 0.95 0.95 0.94 0.93 0.92 0.91 0.90 Press. diff. ratio factor x T 0.91 0.90 0.88 0.86 0.83 0.81 0.78 0.75 0.71 0.67 0.62

1/2 1/2 15.1 17 0.16 0.42 0.95 1.49 2.04 2.6 3.2 3.7 4.3 4.9 5.6 3/4 19.1 17 0.22 0.66 1.57 2.48 3.4 4.4 5.3 6.3 7.5 8.8 10 3/4 1/2 15.1 17 0.16 0.44 1.02 1.59 2.16 2.73 3.3 3.9 4.4 5 5.6 1 19.1 17 0.26 0.89 2.16 3.4 4.8 6.1 7.4 8.8 10.2 11.6 13.1

3/4 15.1 17 0.22 0.74 1.79 2.84 3.9 4.9 6 7 8.1 9.1 10.2 1 1/2 12.05 17 0.16 0.44 1.02 1.59 2.16 2.73 3.3 3.9 4.4 5 5.6

1.1/2 35.1 25 0.51 1.91 4.8 7.6 10.6 13.6 16.6 19.7 22.8 26 29.1 1.1/4 28.1 25 0.37 1.53 3.9 6.2 8.5 10.8 13.1 15.5 17.8 20.1 22.4 1.1/2

1 23.1 25 0.27 1.05 2.61 4.2 5.7 7.3 8.9 10.4 12 13.6 15.1 2 45.2 25 0.95 3.1 7.6 12.1 16.7 21.3 26 30.8 35.7 40.4 47.1

1.1/2 35.1 25 0.52 2.64 6.2 9.8 13.3 16.9 20.4 24 27.5 31 34.3 2 1.1/4 28.1 25 0.37 1.57 4 6.5 9 11.5 14.1 16.7 19.4 22.1 24.8

3 72.3 34 1.56 7 18 29.1 40.4 51.9 63.5 75.4 87.4 99.2 111 2.1/2 60.2 34 1.13 5.7 15 24.2 33.5 42.8 52 61.3 70.5 79.6 88.5 3

2 45.2 34 0.93 3.9 9.9 15.9 21.9 27.9 34 40 46 52 58 4 86.3 45 2.71 12.4 31.8 51.2 70.5 89.9 109 129 148 167 187 3 72.3 45 1.64 8.9 23.4 37.8 52.3 66.8 81.3 95.8 110 124 138 4

2.1/2 60.2 45 1.12 6.7 17.9 29 40.2 51.4 62.5 73.7 84.9 96 107 (1)C=contoured, F=flatted


B-4


CP-E Trim type: Contoured plug flow to open Flow characteristic: EQUAL PERCENTAGE

TRAVEL % DN [in]

Port [mm]

Plug type (1)

ΦΦΦΦ Seat [mm]

Travel [mm] 5% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%


Ø6 C 6 17 0.018 0.022 0.034 0.052 0.079 0.12 0.18 0.28 0.43 0.66 1 0.04 0.048 0.072 0.11 0.16 0.23 0.35 0.51 0.76 1.1 1.7 Ø9 C 9.05 17 0.04 0.049 0.074 0.11 0.17 0.25 0.38 0.58 0.87 1.3 2.5

1/2 3/4 1

Ø12 C 12.05 17 0.06 0.074 0.11 0.17 0.26 0.4 0.6 0.92 1.4 2.1 4


CP-E Trim type: Contoured plug flow to open Flow characteristic: EQUAL PERCENTAGE

TRAVEL % DN [in]

Port [in]

ΦΦΦΦ Seat [mm]

Travel [mm] 5% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%


1/2 1/2 15.1 17 0.16 0.19 0.28 0.4 0.59 0.85 1.24 1.8 2.96 4.4 5.7 3/4 19.1 17 0.22 0.27 0.4 0.59 0.87 1.3 1.92 3.5 5.7 8.2 10 3/4 1/2 15.1 17 0.16 0.19 0.28 0.41 0.6 0.88 1.28 1.88 2.75 4 5.5 1 19.1 17 0.26 0.33 0.5 0.75 1.14 1.74 2.64 4 6.6 9.9 12.9

3/4 15.1 17 0.22 0.27 0.4 0.6 0.9 1.35 2.02 3 5.1 7.8 10.4 1 1/2 12.05 17 0.16 0.19 0.28 0.41 0.59 0.87 1.27 1.85 2.71 4 5.5

1.1/2 35 25 0.52 0.63 0.98 1.52 2.36 3.6 5.7 8.7 14.2 21.4 28.6 1.1/4 28 25 0.36 0.45 0.7 1.09 1.67 2.58 4 6.1 10.2 15.8 22 1.1/2

1 23 25 0.26 0.33 0.51 0.78 1.21 1.86 2.87 4.4 6.6 10.3 15.1 2 45 25 0.91 1.15 1.77 2.7 4.1 6.3 9.5 16.1 25.8 36.7 45.8

1.1/2 35 25 0.52 1.06 1.55 2.29 3.4 5 7.3 10.8 17.3 25.3 33.1 2 1.1/4 28 25 0.36 0.46 0.71 1.09 1.69 2.61 4 6.2 10.4 16.5 23.7

3 72 34 1.66 5.1 7.3 10.6 15.2 22 31.7 45.7 66.8 90.2 112 2.1/2 60 34 1.13 1.37 2.28 3.7 5.9 9.4 15.1 26.6 46.3 68.3 88.4 3

2 45 34 0.93 1.17 1.82 2.84 4.4 6.9 10.7 16.7 27 41.7 58.1 4 86 45 2.71 4 9.6 19 32.3 49.6 70.9 95.2 127 158 187 3 72 45 1.7 2.05 3.3 5.3 8.6 13.8 22.1 39.6 72.3 107 138 4

2.1/2 60 45 1.07 1.44 2.3 3.7 6.1 9.8 15.9 25.7 48.4 78.1 107

PARCOL

B - 5


HC-L Trim type: High Capacity Flow characteristic: LINEAR

TRAVEL % DN [in]

Port [in]

ΦΦΦΦ Seat [mm]

Travel [mm] 5% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%


3/4 18.5 17 0.16 0.17 0.19 1.06 2.37 3.8 5.5 6.9 8.6 9.4 9.7 0.11 0.12 0.13 0.84 1.91 2.98 4 5 5.8 6.5 6.9 3/4

1/2 12.5 17 0.11 0.12 0.13 0.66 1.38 2.07 2.73 3.5 4.3 5.1 5.6

3/4 18.5 17 0.16 0.17 0.19 1.06 2.37 3.8 5.5 7 8.7 10.2 10.8 0.11 0.12 0.13 0.84 1.91 2.98 4 5 5.8 6.5 7.1 1

1/2 12.5 17 0.11 0.12 0.13 0.66 1.38 2.07 2.73 3.5 4.3 5.1 5.6

1.1/2 37.5 34 0.3 0.33 2.69 7.5 12 16.4 21.7 27.3 30.2 32.7 34.2 0.22 0.24 1.49 4.2 7.3 10.2 13.4 16.9 20.5 23.9 25.5 1.1/2

1 27.5 34 0.22 0.24 1.07 3 5.4 7.7 10.2 13 15.9 18.9 22.1 1.02 1.03 5.3 13.9 23.5 33.4 41.8 46.7 51 54.8 60 2 64 34 1.02 1.03 3.2 7.6 13.3 19.7 25.1 31.2 37.9 43.6 46.6 0.3 0.33 2.69 7.5 12 16.4 21.9 27.9 34.4 39.7 41

2 1.1/2 37.5 34

0.3 0.33 1.74 4.9 8.5 12.1 15.9 19.9 24.3 28.4 32.2 3 82 45 1.31 1.34 9.6 24.5 39.2 57.7 76.1 91.8 102 110 118

1.02 1.03 5.3 13.9 23.5 33.7 42.5 53.3 64.5 73.9 86.5 2 64 34

1.02 1.03 3.2 7.6 13.3 19.7 25.1 31.4 38.4 44.9 52 0.3 0.33 2.69 7.5 12 16.4 21.9 28 34.7 41.6 46.8

3

1.1/2 37.5 34 0.3 0.33 1.74 4.9 8.5 12.1 15.9 19.9 24.3 28.5 32.5

2.33 2.36 17.4 43.7 67 94.1 123 150 168 182 193 4 103.5 60 2.33 2.36 13.7 33.4 50.9 73.6 97.6 119 141 161 169 1.02 1.03 5.3 13.9 23.5 33.7 42.5 53.3 64.8 74.5 87.6

4 2 64 34

1.02 1.03 3.2 7.6 13.3 19.7 25.1 31.4 38.4 44.9 52 2.78 2.78 24.5 77.3 146 215 271 315 348 373 392 6 125.5 60 2.78 2.78 13.7 40.4 77.3 118 158 194 228 258 283 1.31 1.34 9.6 24.5 39.2 57.7 76.7 93.2 114 135 155

6 3 82 45

1.31 1.34 7.5 18.7 29.8 42 53.7 65 79.2 93.3 107 4.7 4.7 46.3 134 246 360 452 525 580 620 650 8 160.5 76 4.7 4.7 25.5 70 130 199 265 326 381 431 474

2.33 2.36 17.4 43.7 67 94.1 123 152 185 222 250 8

4 103.5 60 2.33 2.36 13.7 33.4 50.9 73.6 97.6 120 142 167 186 4.7 5.3 82.3 235 429 625 780 895 980 1040 1090 10 214.5 100 4.7 5 43.6 122 227 347 463 570 665 745 820

2.78 2.78 24.5 77.9 151 230 303 369 426 475 515 10

6 125.5 60 2.78 2.78 13.7 40.5 77.9 120 163 205 246 285 321 10 11.8 123 332 590 855 1060 1220 1330 1410 1470 12 242.5 120 10 10.9 66.4 173 315 479 635 780 910 1020 1110 4.7 4.7 46.3 135 253 384 505 610 700 775 835

12 8 160.5 76

4.7 4.7 25.5 70.1 131 202 274 343 411 475 535 14 291.5 150 13.8 13.8 117 410 795 1190 1510 1730 1880 1990 2070 12 242.5 120 10 11.8 123 334 605 895 1140 1340 1500 1620 1710

4.7 5.3 82.4 238 443 670 875 1050 1200 1310 1410 14

10 214.5 100 4.7 5 43.6 122 229 355 481 605 720 830 930

16 341.5 200 18.4 18.4 218 705 1280 1810 2170 2400 2540 2640 2710 14 291.5 150 13.8 13.8 117 412 810 1240 1600 1870 2070 2220 2330

10 11.8 123 335 610 910 1180 1410 1590 1730 1840 16

12 242.5 120 10 10.9 66.4 174 318 489 660 825 980 1120 1250

20 440.5 250 28.7 34 453 1250 2180 3030 3650 4060 4340 4530 4650 18.4 18.4 218 715 1360 2030 2580 3000 3320 3550 3710 20

16 341.5 200 18.4 18.4 118 371 715 1110 1510 1870 2200 2490 2740

24 521.5 300 42.7 49.6 640 1760 3070 4290 5170 5760 6150 6410 6590 28.7 34 454 1260 2260 3280 4100 4720 5170 5500 5730 24

20 440.5 250 28.7 31.3 242 655 1200 1820 2440 3000 3500 3940 4310

Yellow rows for reduced Cv valves


B-6


HC-E Trim type: High Capacity Flow characteristic: EQUAL PERCENTAGE

TRAVEL % DN [in]

Port [in]

ΦΦΦΦ Seat [mm]

Travel [mm] 5% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%


3/4 18.5 17 0.16 0.17 0.18 0.61 1.28 2.12 3.2 4.3 5.6 7 8.6 0.11 0.12 0.13 0.47 0.94 1.5 2.16 2.9 3.9 4.8 5.6 3/4

1/2 12.5 17 0.11 0.12 0.13 0.47 0.94 1.41 1.89 2.44 3 3.8 4.5

3/4 18.5 17 0.16 0.17 0.18 0.61 1.28 2.12 3.2 4.3 5.6 7.1 8.7 0.11 0.12 0.13 0.47 0.94 1.5 2.16 2.9 3.9 4.8 5.6 1

1/2 12.5 17 0.11 0.12 0.13 0.47 0.94 1.41 1.89 2.44 3 3.8 4.5 0.3 0.32 1.26 3.2 5 7.5 11 15.3 19.9 25.4 28.6 1.1/2 37.5 34 0.3 0.32 1.26 3.2 5 7.5 10.3 13.7 17.1 20.3 23.7

0.22 0.24 0.65 1.42 2.55 4.1 5.9 8.2 10.7 14.3 18.7 1.1/2

1 27.5 34 0.22 0.24 0.65 1.42 2.55 4.1 5.6 7.4 9.8 12.7 16.1 1.02 1.02 3.1 7.4 12.1 17.9 24.2 32.9 42.3 45.6 50 2 64 34 1.02 1.02 2.08 4.3 7.5 11.7 15.8 20.6 25.9 30.8 37.5 0.3 0.32 1.26 3.2 5 7.5 11 15.3 20 25.7 31.9

2 1.1/2 37.5 34

0.3 0.32 1.26 3.2 5 7.5 10.3 13.7 17.1 20.4 24 1.31 1.33 5.4 12.8 19.9 29.9 41.7 55.5 72.7 88.9 98.1 3 82 45 1.31 1.33 4.4 10.2 17.2 26.1 35.7 46.1 57.9 69.5 81.2 1.02 1.02 3.1 7.4 12.1 17.9 24.2 33.2 43.8 52.8 64.6

2 64 34 1.02 1.02 2.08 4.3 7.5 11.7 15.8 20.6 25.9 31 38 0.3 0.32 1.26 3.2 5 7.5 11 15.3 20 25.8 32.2

3

1.1/2 37.5 34 0.3 0.32 1.26 3.2 5 7.5 10.3 13.7 17.1 20.4 24

2.33 2.35 9.8 22.7 34.2 52 74.3 98.9 126 153 163 4 103.5 60 2.33 2.35 6.1 14.2 25.3 38.3 54.1 72.8 96.3 121 137 1.02 1.02 3.1 7.4 12.1 17.9 24.2 33.2 43.8 52.8 64.9

4 2 64 34

1.02 1.02 2.08 4.3 7.5 11.7 15.8 20.6 25.9 31 38 2.78 2.78 12.3 27.3 50.8 88.9 144 210 266 309 341 6 125.5 60 2.78 2.78 7.6 15.1 26.9 46.4 76.2 115 153 188 220 1.31 1.33 5.4 12.8 19.9 29.9 41.7 55.5 73.2 90.2 108

6 3 82 45

1.31 1.33 4.4 10.2 17.2 26.1 35.7 46.1 57.9 69.9 82.1 4.7 4.7 19.7 41 79.1 143 237 350 444 515 570 8 160.5 76 4.7 4.7 12.2 22.9 42.1 74.7 125 192 258 319 373

2.33 2.35 9.8 22.7 34.2 52 74.3 99 127 159 184 8

4 103.5 60 2.33 2.35 6.1 14.2 25.3 38.3 54.1 72.8 96.3 121 138 4.7 5.3 32.9 71.9 144 265 440 640 800 915 995 10 214.5 100 4.7 5 18.8 38.3 74.8 137 233 359 479 585 680

2.78 2.78 12.3 27.4 50.9 89.8 149 224 296 359 413 10

6 125.5 60 2.78 2.78 7.6 15.1 26.9 46.5 76.9 118 159 198 236 10 11.6 47 98.6 196 360 595 865 1080 1240 1340 12 242.5 120 10 10.8 28.5 54.3 104 188 316 488 655 800 925 4.7 4.7 19.7 41 79.3 144 243 372 493 595 685

12 8 160.5 76

4.7 4.7 12.2 22.9 42.1 74.9 126 196 267 335 400 14 291.5 150 1.1 1.1 48.7 131 272 505 835 1230 1550 1760 1910 12 242.5 120 10 11.6 47.1 98.7 197 362 605 910 1170 1370 1520

4.7 5.3 32.9 72 145 269 455 690 905 1080 1220 14

10 214.5 100 4.7 5 18.8 38.3 74.9 138 235 367 499 625 740

16 341.5 200 18.4 18.4 91.3 209 405 715 1150 1650 2040 2290 2460 14 291.5 150 1.1 1.1 48.7 131 272 505 850 1280 1640 1910 2100

10 11.6 47.1 98.7 197 364 610 925 1210 1430 1610 16

12 242.5 120 10 10.8 28.5 54.4 104 188 319 498 680 845 1000

20 440.5 250 28.7 32.4 175 379 725 1270 2010 2860 3520 3960 4250 18.4 18.4 91.3 209 407 730 1200 1810 2370 2810 3130 20

16 341.5 200 18.4 18.4 54.9 114 213 377 630 980 1350 1690 2000

24 521.5 300 42.7 47.5 222 491 970 1750 2830 4050 5010 5640 6050 28.7 32.4 175 379 727 1280 2080 3060 3930 4560 5050 24

20 440.5 250 28.7 30.5 102 204 379 665 1090 1680 2290 2850 3350

Yellow rows for reduced Cv valves

PARCOL

B - 7

VeGA valve 1-6943 Type – Cv FL xT

LN-L Trim type: Low Noise Flow characteristic: LINEAR

TRAVEL % DN [in]

Port [in]

ΦΦΦΦ Seat [mm]

Travel [mm] 5% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

Pressure recovery factor F L 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.93 Press. diff. ratio factor x T 0.78 0.78 0.78 0.77 0.77 0.77 0.77 0.77 0.77 0.77 0.76

3/4 18.5 17 0.16 0.17 0.18 1.64 3.5 5.2 6.7 8.3 9 9.2 9.4 3/4 1/2 12.5 17 0.11 0.12 0.14 1.49 2.86 4.2 5.1 5.8 6.4 6.5 6.5 3/4 18.5 17 0.16 0.17 0.18 1.64 3.5 5.2 6.8 8.4 9.7 10.2 10.3 1 1/2 12.5 17 0.11 0.12 0.14 1.49 2.86 4.2 5.1 5.9 6.5 7 7.2

1.1/2 37.5 34 0.3 0.32 5.4 13.2 20.3 26.4 29.4 31.4 32.7 33.6 34.4 1.1/2 1 27.5 34 0.22 0.24 4.2 9.9 15.3 20.4 23.9 24.4 24.5 24.7 24.9 2 64 34 1.02 1.02 8.9 21.1 33.2 42.9 46.8 50.7 54.8 58.9 63.2 2

1.1/2 37.5 34 0.3 0.32 5.4 13.2 20.4 27 33.8 38.1 39.2 39.8 40.2 3 82 45 1.31 1.33 17 37.7 58.5 77.5 93.2 100 107 114 121 2 64 34 1.02 1.02 8.9 21.1 33.5 45.3 56.3 66.2 76.7 86.4 92.5 3

1.1/2 37.5 34 0.3 0.32 5.4 13.2 20.4 27.2 34.3 40.2 45.1 49 52.4 4 103.5 60 2.33 2.35 27.4 60.2 91.7 121 148 161 172 182 193 4 2 64 34 1.02 1.02 8.9 21.1 33.5 45.3 56.3 66.6 77.6 87.9 98.5 6 125.5 60 2.89 2.89 34.3 75.2 115 154 191 225 258 292 325 6 3 82 45 1.31 1.33 17 37.7 58.5 78.3 96.4 115 133 151 169 8 160.5 76 4.9 4.9 64.4 127 191 255 313 367 420 474 525 8 4 103.5 60 2.33 2.35 27.4 60.2 91.7 122 151 178 206 234 262 10 214.5 100 8 10 118 230 342 454 555 655 745 840 915 10 6 125.5 60 2.89 2.89 34.3 75.2 115 154 191 226 261 296 331 12 242.5 120 10.6 20.3 172 323 475 630 760 890 1020 1150 1240 12 8 160.5 76 4.9 4.9 64.4 127 191 255 313 369 424 480 535 14 291.5 150 11.6 12.2 180 410 640 870 1070 1260 1450 1640 1770 12 242.5 120 10.6 20.3 172 323 475 630 760 895 1030 1160 1280 14 10 214.5 100 8 10 118 230 342 454 555 660 755 850 950 16 341.5 200 15.2 16.1 306 665 1030 1360 1670 1970 2170 2290 2410 14 291.5 150 11.6 12.2 180 410 640 870 1070 1270 1460 1650 1850 16 12 242.5 120 10.6 20.3 172 323 475 630 760 895 1030 1160 1290 20 440.5 250 25.5 41.7 600 1170 1730 2260 2730 3210 3660 3910 4100 20 16 341.5 200 15.2 16.1 306 665 1030 1370 1690 2000 2310 2610 2910 24 521.5 300 38.6 61.8 890 1730 2560 3320 4030 4730 5340 5670 5930 24 20 440.5 250 25.5 41.7 600 1170 1730 2270 2760 3240 3720 4200 4660


B-8

VeGA valve 1-6943 Type – Cv FL xT

LN-E Trim type: Low Noise Flow characteristic: EQUAL PERCENTAGE

TRAVEL % DN [in]

Port [in]

ΦΦΦΦ Seat [mm]

Travel [mm] 5% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%


3/4 18.5 17 0.16 0.17 0.17 0.46 1.11 1.86 2.84 3.9 5.1 6.5 8.1 3/4 1/2 12.5 17 0.11 0.12 0.13 0.39 0.78 1.37 2.1 2.91 4 4.9 5.7 3/4 18.5 17 0.16 0.17 0.17 0.46 1.11 1.86 2.84 3.9 5.1 6.5 8.1 1 1/2 12.5 17 0.11 0.12 0.13 0.39 0.78 1.37 2.1 2.91 4 4.9 5.7

1.1/2 37.5 34 0.3 0.32 1.17 2.93 5.6 8.2 11.9 16.1 20.9 26 29.1 1.1/2 1 27.5 34 0.22 0.24 0.51 1.32 2.54 4.8 7.3 10.2 13.4 17.9 22.4 2 64 34 1.02 1.02 1.44 4.4 9.7 15.6 24.3 34.2 43.4 47.1 51.2 2

1.1/2 37.5 34 0.3 0.32 1.17 2.93 5.6 8.2 11.9 16.1 21 26.5 33.1 3 82 45 1.31 1.33 5.2 10.4 19.7 30.1 40.5 55.3 72.1 89.4 98.2 2 64 34 1.02 1.02 1.44 4.4 9.7 15.6 24.3 34.5 46.6 57 67.5 3

1.1/2 37.5 34 0.3 0.32 1.17 2.93 5.6 8.2 11.9 16.1 21 26.6 33.5 4 103.5 60 2.33 2.35 8.6 16.8 29.7 45.5 65.5 89.3 117 144 160 4 2 64 34 1.02 1.02 1.44 4.4 9.7 15.6 24.3 34.5 46.6 57 68 6 125.5 60 2.89 2.89 12 29 52.6 82.3 119 158 194 228 262 6 3 82 45 1.31 1.33 5.2 10.4 19.7 30.1 40.5 55.3 72.6 90.9 109 8 160.5 76 4.9 4.9 23.7 53.2 91.7 139 198 262 319 373 426 8 4 103.5 60 2.33 2.35 8.6 16.8 29.7 45.5 65.5 89.3 118 146 175 10 214.5 100 8 8.3 38.4 87.2 155 240 344 461 555 650 745 10 6 125.5 60 2.89 2.89 12 29 52.6 82.3 119 158 194 229 264 12 242.5 120 10.6 12.2 48.6 120 211 323 468 620 750 880 1010 12 8 160.5 76 4.9 4.9 23.7 53.2 91.7 139 198 262 319 375 430 14 291.5 150 11.6 12.2 54.2 155 271 443 645 875 1070 1270 1460 12 242.5 120 10.6 12.2 48.6 120 211 323 468 620 755 890 1020 14 10 214.5 100 8 8.3 38.4 87.2 155 240 344 461 560 655 755 16 341.5 200 15.2 16.1 88.5 199 380 560 810 1110 1440 1740 2030 14 291.5 150 11.6 12.2 54.2 155 271 443 645 875 1080 1270 1470 16 12 242.5 120 10.6 12.2 48.6 120 211 323 468 620 755 890 1020 20 440.5 250 25.5 28.8 141 361 660 1010 1460 1980 2470 2950 3410 20 16 341.5 200 15.2 16.1 88.5 199 380 560 810 1110 1450 1760 2070 24 521.5 300 38.6 42.5 180 454 860 1410 2060 2880 3590 4290 4980 24 20 440.5 250 25.5 28.8 141 361 660 1010 1460 1980 2480 2980 3440

PARCOL

B - 9


XLN-L Trim type: Special Low Noise Flow characteristic: LINEAR

TRAVEL % DN [in]

Port [in]

ΦΦΦΦ Seat [mm]

Travel [mm] 5% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%


3/4 18.5 17 0.16 0.17 0.18 1.26 2.35 3.4 4.4 5.3 6.2 7.1 8 3/4 1/2 12.5 17 0.11 0.12 0.14 1.03 1.92 2.73 3.5 4.3 4.9 5.4 5.8 3/4 18.5 17 0.16 0.17 0.18 1.26 2.35 3.4 4.4 5.3 6.3 7.2 8.1 1 1/2 12.5 17 0.11 0.12 0.14 1.03 1.92 2.73 3.5 4.3 4.9 5.4 5.8

1.1/2 37.5 34 0.3 0.32 3.6 8.4 12.8 17.3 21 25.1 27.5 29.1 30.5 1.1/2 1 27.5 34 0.22 0.24 2.25 5.2 8 10.4 12.9 15.5 17.8 20 22 2 64 34 1.02 1.02 6.1 13.6 20.4 27.9 34.5 41.3 44.1 46.4 48.6 2

1.1/2 37.5 34 0.3 0.32 3.6 8.4 12.8 17.4 21.2 25.4 29.1 33.1 36.6 3 82 45 1.31 1.33 11.3 22.9 34.5 46.1 57.7 68.9 79 88.7 95 2 64 34 1.02 1.02 6.1 13.6 20.4 28 34.8 42.4 48.6 55 61 3

1.1/2 37.5 34 0.3 0.32 3.6 8.4 12.8 17.4 21.2 25.4 29.3 33.5 37.3 4 103.5 60 2.35 2.35 19 37.8 57.3 76.2 94.7 113 130 145 156 4 2 64 34 1.02 1.02 6.1 13.6 20.4 28 34.8 42.4 48.6 55 61.2 6 125.5 60 2.89 2.89 23.7 47.2 71.6 95.2 118 143 167 187 207 6 3 82 45 1.31 1.33 11.3 22.9 34.5 46.1 57.7 69.3 79.8 90 100 8 160.5 76 4.9 4.9 40.7 75.8 112 147 184 218 256 288 320 8 4 103.5 60 2.35 2.35 19 37.8 57.3 76.2 94.7 114 131 147 164 10 214.5 100 8 9.7 77.8 146 215 283 351 418 486 545 600 10 6 125.5 60 2.89 2.89 23.7 47.2 71.6 95.2 118 143 167 187 208 12 242.5 120 10.6 19.1 118 216 312 409 510 605 695 775 860 12 8 160.5 76 4.9 4.9 40.7 75.8 112 147 184 218 256 288 321 14 291.5 150 11.6 12.2 124 270 416 565 710 855 990 1110 1240 12 242.5 120 10.6 19.1 118 216 312 409 510 605 695 780 865 14 10 214.5 100 8 9.7 77.8 146 215 283 351 418 486 545 605 16 341.5 200 15.2 16.1 204 421 645 865 1090 1300 1480 1670 1860 14 291.5 150 11.6 12.2 124 270 416 565 710 855 990 1120 1240 16 12 242.5 120 10.6 19.1 118 216 312 409 510 605 695 780 865 20 440.5 250 25.5 40.3 392 735 1080 1430 1770 2110 2400 2700 2990 20 16 341.5 200 15.2 16.1 204 421 645 865 1090 1300 1490 1690 1880 24 521.5 300 38.6 58.5 565 1080 1580 2080 2590 3070 3500 3930 4350 24 20 440.5 250 25.5 40.3 392 735 1080 1430 1770 2110 2410 2720 3020


B-10


XLN-E Trim type: Special Low Noise Flow characteristic: EQUAL PERCENTAGE

TRAVEL % DN [in]

Port [in]

ΦΦΦΦ Seat [mm]

Travel [mm] 5% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%


3/4 18.5 17 0.16 0.17 0.18 0.61 1.25 2.09 2.95 3.9 4.9 5.8 6.7 3/4 1/2 12.5 17 0.11 0.12 0.13 0.48 0.89 1.45 2.06 2.81 3.6 4.3 4.9 3/4 18.5 17 0.16 0.17 0.18 0.61 1.25 2.09 2.95 3.9 4.9 5.8 6.7 1 1/2 12.5 17 0.11 0.12 0.13 0.48 0.89 1.45 2.06 2.81 3.6 4.3 4.9

1.1/2 37.5 34 0.3 0.32 1.41 3 4.7 7.9 10.8 15 18.8 22.8 26.3 1.1/2 1 27.5 34 0.22 0.24 0.58 1.33 2.28 3.5 5 6.9 9.1 11.6 14.1 2 64 34 1.02 1.02 2.3 4.2 7.3 11 15.9 21.6 28.3 35.3 41.6 2

1.1/2 37.5 34 0.3 0.32 1.41 3 4.7 7.9 10.8 15 18.9 23 26.9 3 82 45 1.31 1.33 3.8 9.1 15.8 24.5 35.3 46.9 58.5 69.7 79.7 2 64 34 1.02 1.02 2.3 4.2 7.3 11 15.9 21.6 28.4 35.7 42.8 3

1.1/2 37.5 34 0.3 0.32 1.41 3 4.7 7.9 10.8 15 18.9 23 27 4 103.5 60 2.35 2.35 6.6 16 29.2 43.3 59.7 79.2 98.3 116 132 4 2 64 34 1.02 1.02 2.3 4.2 7.3 11 15.9 21.6 28.4 35.7 42.8 6 125.5 60 2.89 2.89 9.8 22.2 38.4 57.5 80.6 105 129 152 175 6 3 82 45 1.31 1.33 3.8 9.1 15.8 24.5 35.3 46.9 58.5 70.2 80.5 8 160.5 76 4.9 4.9 16.4 36.2 59.9 90.6 128 162 199 234 271 8 4 103.5 60 2.35 2.35 6.6 16 29.2 43.3 59.7 79.2 98.4 116 133 10 214.5 100 8 8.4 31.3 67.9 113 168 235 303 371 438 505 10 6 125.5 60 2.89 2.89 9.8 22.2 38.4 57.5 80.6 105 129 152 175 12 242.5 120 10.6 12.3 41.4 91.8 156 235 333 432 530 625 710 12 8 160.5 76 4.9 4.9 16.4 36.2 59.9 90.6 128 162 199 234 271 14 291.5 150 11.6 12.2 40.9 114 198 319 466 610 760 905 1030 12 242.5 120 10.6 12.3 41.4 91.8 156 235 333 432 530 625 710 14 10 214.5 100 8 8.4 31.3 67.9 113 168 235 303 371 438 505 16 341.5 200 15.2 16.1 72.5 181 314 491 715 935 1160 1360 1540 14 291.5 150 11.6 12.2 40.9 114 198 319 466 610 760 905 1030 16 12 242.5 120 10.6 12.3 41.4 91.8 156 235 333 432 530 625 710 20 440.5 250 25.5 28.5 135 301 520 815 1160 1510 1850 2180 2470 20 16 341.5 200 15.2 16.1 72.5 181 314 491 715 935 1160 1360 1550 24 521.5 300 38.6 43.6 171 427 760 1180 1690 2200 2710 3170 3590 24 20 440.5 250 25.5 28.5 135 301 520 815 1160 1510 1850 2190 2480

PARCOL

B - 11


DC-L Trim type: Double Cage for liquid service Flow characteristic: LINEAR

TRAVEL % DN [in]

Port [in]

ΦΦΦΦ Seat [mm]

Travel [mm] 5% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

Pressure recovery factor F L 0.955 0.955 0.955 0.955 0.955 0.955 0.955 0.955 0.955 0.955 0.955 3/4 18.5 17 0.16 0.17 0.18 2.04 2.66 3.4 4.8 4.9 6.3 6.5 6.8 3/4 1/2 12.5 17 0.11 0.12 0.13 1.62 2.08 2.72 3.8 3.8 4.7 4.9 5.1 3/4 18.5 17 0.16 0.17 0.18 2.04 2.66 3.4 4.8 4.9 6.5 6.9 7.5 1 1/2 12.5 17 0.11 0.12 0.13 1.62 2.08 2.72 3.8 3.9 4.7 4.9 5.3

1.1/2 37.5 34 0.3 0.32 4.7 6.9 9.9 14.1 16.6 18.4 20.2 21.5 22.2 1.1/2 1 27.5 34 0.22 0.24 3.9 5.7 7.9 11.4 13.5 15 17.6 18.3 18.5 2 64 34 1.02 1.02 7.4 9.8 17.3 21.3 25.2 30.8 31.5 33.5 35.3 2

1.1/2 37.5 34 0.3 0.32 4.7 6.9 9.9 14.2 16.8 18.6 22.3 25.7 27 3 82 45 1.31 1.33 13.3 18.9 28.3 40.5 46 54.2 64.4 67.3 70.1 2 64 34 1.02 1.02 7.4 9.8 17.3 21.4 25.5 32.8 34.9 40.4 45 3

1.1/2 37.5 34 0.3 0.32 4.7 6.9 9.9 14.2 16.8 18.7 22.5 26.1 27.9 4 103.5 60 2.33 2.35 19 33.2 44.7 56 68.9 84.3 98.1 108 112 4 2 64 34 1.02 1.02 7.4 9.8 17.3 21.4 25.5 32.8 34.9 40.4 45.3 6 125.5 60 2.89 2.89 25.3 38.8 52.3 74.7 93.5 106 122 143 155 6 3 82 45 1.31 1.33 13.3 18.9 28.3 40.5 46.2 54.7 65.6 70.6 78.2 8 160.5 76 4.9 4.9 46 72.4 95.8 131 167 191 214 248 273 8 4 103.5 60 2.33 2.35 19 33.2 44.7 56 68.9 84.9 99.3 110 120 10 214.5 100 8 9.3 65.1 121 165 205 247 293 350 396 432 10 6 125.5 60 2.89 2.89 25.3 38.8 52.3 74.7 93.5 106 122 143 156 12 242.5 120 10.6 16.7 90.3 170 249 328 401 468 525 585 640 12 8 160.5 76 4.9 4.9 46 72.4 95.8 131 167 191 214 249 275 14 291.5 150 11.6 12.2 101 190 289 394 500 610 705 785 860 12 242.5 120 10.6 16.7 90.3 170 249 328 401 468 525 585 645 14 10 214.5 100 8 9.3 65.1 121 165 205 247 293 350 397 434 16 341.5 200 15.2 16.1 152 335 520 655 825 990 1120 1240 1390 14 291.5 150 11.6 12.2 101 190 289 394 500 610 705 790 865 16 12 242.5 120 10.6 16.7 90.3 170 249 328 401 468 525 585 645 20 20 16 341.5 200 15.2 16.1 152 335 520 655 825 995 1130 1260 1420 24 521.5 300 38.6 51.6 515 865 1290 1700 2050 2450 2740 3080 3420 24 20 440.5 250 25.5 34.9 337 570 825 1110 1330 1600 1820 2030 2280


B-12


DC-E Trim type: Double Cage for liquid service Flow characteristic: EQUAL PERCENTAGE

TRAVEL % DN [in]

Port [in]

ΦΦΦΦ Seat [mm]

Travel [mm] 5% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

Pressure recovery factor F L 0.955 0.955 0.955 0.955 0.955 0.955 0.955 0.955 0.955 0.955 0.955 3/4 18.5 17 0.16 0.17 0.18 0.79 1 1.58 2.66 2.72 4.4 4.8 5.6 3/4 1/2 12.5 17 0.11 0.12 0.12 0.64 0.81 1.29 2.08 2.13 3.5 3.8 4.3 3/4 18.5 17 0.16 0.17 0.18 0.79 1 1.58 2.66 2.72 4.4 4.8 5.7 1 1/2 12.5 17 0.11 0.12 0.12 0.64 0.81 1.29 2.08 2.13 3.5 3.8 4.3

1.1/2 37.5 34 0.3 0.32 1.43 2.27 3.5 6.3 8.6 10.2 13.8 17.2 18.7 1.1/2 1 27.5 34 0.22 0.24 0.98 1.34 1.84 3.4 4.4 5.2 7.2 9.6 11 2 64 34 1.02 1.02 3.6 4.6 8.6 11.3 14.1 20 22.1 27.8 31 2

1.1/2 37.5 34 0.3 0.32 1.43 2.27 3.5 6.3 8.6 10.2 13.8 17.4 19.1 3 82 45 1.31 1.33 6.1 8.9 13.9 22.1 26.5 33.6 45.2 50.7 57.9 2 64 34 1.02 1.02 3.6 4.6 8.6 11.3 14.1 20.1 22.2 28.2 33.4 3

1.1/2 37.5 34 0.3 0.32 1.43 2.27 3.5 6.3 8.6 10.2 13.8 17.4 19.2 4 103.5 60 2.33 2.35 9 16.6 24 32 42.3 57.7 73.9 85.5 94.9 4 2 64 34 1.02 1.02 3.6 4.6 8.6 11.3 14.1 20.1 22.2 28.2 33.4 6 125.5 60 2.89 2.89 11.8 18.8 26.5 44.4 61.9 74.2 90.6 114 128 6 3 82 45 1.31 1.33 6.1 8.9 13.9 22.1 26.5 33.6 45.3 51 58.6 8 160.5 76 4.9 4.9 21.3 35.3 49.7 77.6 112 135 160 200 226 8 4 103.5 60 2.33 2.35 9 16.6 24 32 42.3 57.7 74.1 86.1 95.9 10 214.5 100 8 8.5 29.4 57.2 90 124 161 208 265 318 359 10 6 125.5 60 2.89 2.89 11.8 18.8 26.5 44.4 61.9 74.2 90.6 114 128 12 242.5 120 10.6 13.3 46 81.3 134 196 260 329 397 462 520 12 8 160.5 76 4.9 4.9 21.3 35.3 49.7 77.6 112 135 160 200 226 14 291.5 150 11.6 12.2 56.5 101 162 238 329 432 535 635 710 12 242.5 120 10.6 13.3 46 81.3 134 196 260 329 397 462 520 14 10 214.5 100 8 8.5 29.4 57.2 90 124 161 208 265 318 359 16 341.5 200 15.2 16.1 71.3 169 291 386 530 720 870 1000 1160 14 291.5 150 11.6 12.2 56.5 101 162 238 329 432 535 635 710 16 12 242.5 120 10.6 13.3 46 81.3 134 196 260 329 397 462 520 20 20 16 341.5 200 15.2 16.1 71.3 169 291 386 530 720 870 1000 1170 24 521.5 300 38.6 44.3 248 430 685 980 1290 1760 2100 2450 2800 24 20 440.5 250 25.5 29.6 163 282 428 635 835 1120 1380 1590 1850

PARCOL

B - 13


EDC-L Trim type: Double Cage with expansion for liquid service Flow characteristic: LINEAR

TRAVEL % DN [in]

Port [in]

ΦΦΦΦ Seat [mm]

Travel [mm]

FL

5% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

3/4 18.5 17 0.986 0.11 0.11 0.13 1.39 1.81 2.33 3.3 3.3 4.3 4.4 4.6 3/4 1/2 12.5 17 0.986 0.08 0.08 0.09 1.17 1.5 1.96 2.75 2.77 3.4 3.5 3.6 3/4 18.5 17 0.986 0.1 0.11 0.12 1.33 1.74 2.24 3.2 3.2 4.3 4.5 4.9 1 1/2 12.5 17 0.986 0.08 0.08 0.09 1.17 1.5 1.95 2.75 2.78 3.4 3.5 3.8

1.1/2 37.5 34 0.985 0.27 0.3 4.3 6.3 9.1 12.9 15.2 16.8 18.5 19.7 20.4 1.1/2 1 27.5 34 0.985 0.2 0.22 3.6 5.2 7.2 10.4 12.3 13.7 16.1 16.7 16.9 2 64 34 0.982 0.96 0.96 6.9 9.2 16.3 20 23.7 29 29.6 31.5 33.2 2

1.1/2 37.5 34 0.985 0.24 0.26 3.9 5.6 8.1 11.5 13.7 15.2 18.2 21 22 3 82 45 0.982 1.06 1.08 10.8 15.3 22.8 32.7 37.1 43.7 51.9 54.3 56.6 2 64 34 0.982 0.86 0.86 6.2 8.2 14.4 17.8 21.2 27.4 29.1 33.7 37.6 3

1.1/2 37.5 34 0.985 0.25 0.27 3.9 5.7 8.2 11.7 13.9 15.5 18.7 21.6 23.1 4 103.5 60 0.987 1.7 1.71 13.8 24.2 32.6 40.8 50.1 61.4 71.4 78.2 81.6 4 2 64 34 0.982 0.86 0.86 6.2 8.3 14.6 18 21.5 27.6 29.4 34.1 38.2 6 125.5 60 0.983 2.45 2.45 21.4 32.9 44.4 63.4 79.3 90 104 121 131 6 3 82 45 0.982 1 1.02 10.2 14.5 21.6 31 35.4 41.8 50.2 54.1 59.9 8 160.5 76 0.984 3.7 3.7 35 55.1 72.9 99.5 127 145 163 189 208 8 4 103.5 60 0.987 1.66 1.68 13.5 23.7 31.9 40 49.2 60.6 70.8 78.7 85.7

10 214.5 100 0.986 6 6.9 48.6 90 123 153 184 219 261 295 322 10 6 125.5 60 0.983 2.5 2.5 21.8 33.5 45.2 64.5 80.8 91.6 105 123 134

12 242.5 120 0.983 7.9 12.5 67.7 127 187 246 301 351 394 437 479 12 8 160.5 76 0.984 3.8 3.8 35.4 55.7 73.6 100 128 147 164 191 211

14 291.5 150 0.983 9.8 10.3 85 160 244 333 423 515 595 660 725 12 242.5 120 0.983 8 12.5 67.8 127 187 246 301 351 396 440 484 14 10 214.5 100 0.986 6 7 49 90.8 124 155 186 221 264 299 327 16 341.5 200 0.985 12.1 12.9 121 267 413 520 655 790 890 990 1110 14 291.5 150 0.983 9.8 10.3 85.4 161 245 334 425 515 595 670 735 16 12 242.5 120 0.983 8 12.6 68.1 128 188 248 302 353 398 442 487 20 20 16 341.5 200 0.985 12.2 12.9 121 267 414 520 660 795 900 1010 1140 24 521.5 300 0.986 29.2 39 389 655 970 1280 1550 1850 2070 2330 2580 24 20 440.5 250 0.985 23.3 31.8 308 520 750 1010 1220 1460 1660 1850 2080


B-14


EDC-E Trim type: Double Cage with expansion for liquid service Flow characteristic: EQUAL PERCENTAGE

TRAVEL % DN [in]

Port [in]

ΦΦΦΦ Seat [mm]

Travel [mm] FL 5% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

3/4 18.5 17 0.986 0.11 0.12 0.12 0.55 0.69 1.1 1.84 1.88 3 3.3 3.9 3/4 1/2 12.5 17 0.986 0.08 0.08 0.09 0.46 0.59 0.93 1.5 1.53 2.52 2.75 3.1 3/4 18.5 17 0.986 0.12 0.12 0.13 0.58 0.73 1.16 1.95 1.99 3.2 3.5 4.2 1 1/2 12.5 17 0.986 0.08 0.09 0.09 0.47 0.6 0.96 1.55 1.58 2.61 2.84 3.2

1.1/2 37.5 34 0.985 0.28 0.3 1.32 2.09 3.2 5.8 7.9 9.5 12.7 15.9 17.3 1.1/2 1 27.5 34 0.985 0.29 0.31 1.27 1.74 2.39 4.5 5.8 6.8 9.4 12.5 14.3 2 64 34 0.982 0.93 0.93 3.2 4.2 7.8 10.3 12.8 18.2 20.1 25.3 28.2 2

1.1/2 37.5 34 0.985 0.29 0.32 1.39 2.21 3.4 6.2 8.4 10 13.5 17 18.7 3 82 45 0.982 1.09 1.11 5.1 7.4 11.5 18.3 22 27.9 37.5 42.1 48.1 2 64 34 0.982 0.98 0.98 3.4 4.4 8.3 10.9 13.4 19.2 21.3 27 32 3

1.1/2 37.5 34 0.985 0.31 0.33 1.46 2.32 3.6 6.4 8.7 10.5 14.1 17.8 19.7 4 103.5 60 0.987 1.71 1.72 6.6 12.1 17.5 23.4 30.9 42.2 54.1 62.5 69.4 4 2 64 34 0.982 1 1 3.5 4.5 8.4 11 13.7 19.5 21.6 27.4 32.5 6 125.5 60 0.983 2.53 2.53 10.4 16.5 23.1 38.8 54.1 64.8 79.2 100 112 6 3 82 45 0.982 1.14 1.16 5.3 7.7 12.1 19.2 23 29.2 39.4 44.3 50.9 8 160.5 76 0.984 3.8 3.8 16.7 27.6 38.8 60.6 87.2 106 125 156 177 8 4 103.5 60 0.987 1.77 1.79 6.8 12.6 18.2 24.3 32.1 43.9 56.3 65.4 72.9 10 214.5 100 0.986 6.1 6.5 22.4 43.6 68.6 94.2 123 158 202 242 274 10 6 125.5 60 0.983 2.59 2.59 10.6 16.9 23.7 39.7 55.4 66.3 81.1 102 114 12 242.5 120 0.983 8.3 10.4 36 63.7 105 153 204 258 311 362 408 12 8 160.5 76 0.984 3.9 3.9 17 28.1 39.5 61.6 88.7 107 127 159 180 14 291.5 150 0.983 10.1 10.6 49 87.5 140 206 285 375 465 550 615 12 242.5 120 0.983 8.4 10.5 36.3 64.2 106 154 205 260 314 365 412 14 10 214.5 100 0.986 6.2 6.6 22.8 44.2 69.6 95.7 124 161 205 246 278 16 341.5 200 0.985 12.5 13.2 58.3 138 238 316 434 590 710 815 945 14 291.5 150 0.983 10.2 10.7 49.5 88.4 142 209 288 378 470 555 625 16 12 242.5 120 0.983 8.4 10.5 36.5 64.5 107 155 206 261 315 367 414 20 20 16 341.5 200 0.985 12.6 13.3 59 140 241 320 439 595 720 830 965 24 521.5 300 0.986 30.2 34.7 194 336 535 765 1010 1370 1650 1920 2200 24 20 440.5 250 0.985 24.4 28.3 155 270 409 605 800 1070 1320 1520 1770

PARCOL

B - 15


PLN-L Trim type: Plug with Pilot - Low Noise Flow characteristic: LINEAR

TRAVEL % DN [in]

Port [in]

ΦΦΦΦ Seat [mm]

Travel [mm] 5% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%


2 2 65.5 34 1.02 1.02 3.5 9.2 19.8 30.1 40.7 45.1 48.5 52.2 55.7 3 3 83.5 45 1.3 1.33 5.6 20.5 39 57.6 75.3 90.7 98.2 104 110 4 4 105.5 60 2.31 2.35 11.2 37.9 67 96.1 123 148 161 170 180 6 6 127.5 60 2.85 2.89 13.2 45.5 81.3 117 153 187 217 247 277 8 8 162.5 76 4.9 4.9 30.1 87.9 146 204 263 316 366 416 465

10 10 216.5 100 8 8 65.1 172 278 382 489 580 670 760 850 12 12 244.5 120 10.6 11.2 97.2 235 373 510 645 765 880 995 1110 14 14 294.5 150 11.6 12.2 93.9 305 510 720 930 1140 1340 1540 1720 16 16 344.5 200 15.2 16.1 191 530 875 1220 1510 1800 2070 2210 2330 20 20 443.5 250 25.3 26.2 457 995 1540 2080 2540 2990 3450 3790 3980 24 24 524.5 300 38.6 39.3 690 1510 2320 3110 3800 4490 5140 5550 5820


PLN-E Trim type: Plug with Pilot - Low Noise Flow characteristic: EQUAL PERCENTAGE

TRAVEL % DN [in]

Port [in]

ΦΦΦΦ Seat [mm]

Travel [mm] 5% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%


2 2 65.5 34 1.02 1.02 2.26 5 8.4 13.7 19.2 25.5 33 42.5 46 3 3 83.5 45 1.3 1.33 4.2 8.7 15.1 24.4 37.2 51.2 64.7 81 94.3 4 4 105.5 60 2.31 2.35 7.4 14.7 27.8 42.3 57.1 78.9 105 131 153 6 6 127.5 60 2.85 2.89 10.9 22.8 43.6 67.5 95.2 131 167 199 228 8 8 162.5 76 4.9 4.9 15 39.7 74.5 114 168 226 284 335 384

10 10 216.5 100 8 8 27.1 66 124 201 299 406 510 600 690 12 12 244.5 120 10.6 10.9 37.4 90.9 171 279 403 540 675 790 905 14 14 294.5 150 11.6 12.2 46.7 130 245 403 605 815 1020 1230 1430 16 16 344.5 200 15.2 16.1 80.1 165 323 494 750 1010 1340 1620 1910 20 20 443.5 250 25.3 25.9 132 333 585 915 1330 1860 2360 2810 3270 24 24 524.5 300 38.6 39.2 239 477 885 1370 1980 2680 3400 4100 4770


Issue 04-2009 ACA 0337/B


PXLN-L Trim type: Plug with Pilot - Low Noise Flow characteristic: LINEAR

TRAVEL % DN [in]

Port [in]

ΦΦΦΦ Seat [mm]

Travel [mm] 5% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%


2 2 65.5 34 1.02 1.02 2.92 6.1 12.6 19.1 25.1 31.5 37.6 42.4 44.8 3 3 83.5 45 1.29 1.33 4.1 13.4 24.6 35.5 46.1 56.7 67.2 77.4 86.7 4 4 105.5 60 2.31 2.35 8.9 25.5 42.8 59.9 77 94.3 111 127 142 6 6 127.5 60 2.86 2.89 10.4 30.5 52 73.4 94.6 116 137 158 178 8 8 162.5 76 4.9 4.9 20.1 53.6 87.5 119 152 186 218 251 284

10 10 216.5 100 8 8 45.1 106 169 233 293 355 420 481 535 12 12 244.5 120 10.6 11.1 70.8 159 248 336 423 510 600 680 755 14 14 294.5 150 11.6 12.2 69.8 202 337 472 605 740 875 1010 1130 16 16 344.5 200 15.1 16.1 126 339 550 760 970 1180 1370 1550 1720 20 20 443.5 250 25.3 26.2 298 635 960 1290 1630 1960 2260 2540 2820 24 24 524.5 300 38.6 39.2 442 925 1410 1890 2390 2870 3300 3700 4120


PXLN-E Trim type: Plug with Pilot - Low Noise Flow characteristic: EQUAL PERCENTAGE

TRAVEL % DN [in]

Port [in]

ΦΦΦΦ Seat [mm]

Travel [mm] 5% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%


2 2 65.5 34 1.02 1.02 1.97 3.6 6.8 11.1 15.6 20.6 26.4 32.3 38.7 3 3 83.5 45 1.29 1.33 3.1 7.4 14.3 22.4 30.4 40.3 51.1 62.2 72.8 4 4 105.5 60 2.31 2.35 5.8 13.9 22.6 35.2 48.2 65.6 83.1 100 117 6 6 127.5 60 2.86 2.89 8.4 15.5 28.8 43 63.8 84.9 106 127 148 8 8 162.5 76 4.9 4.9 11 25.7 46 67.8 98.8 133 164 197 231

10 10 216.5 100 8 8 20 43.7 81.7 132 192 254 318 380 441 12 12 244.5 120 10.6 10.9 34.7 70.1 123 192 273 360 448 535 625 14 14 294.5 150 11.6 12.2 35.6 88.9 166 267 397 530 665 800 930 16 16 344.5 200 15.1 16.1 56.2 140 256 413 605 820 1030 1240 1420 20 20 443.5 250 25.3 26 122 256 450 690 1010 1340 1670 2000 2290 24 24 524.5 300 38.6 39.1 161 371 630 990 1440 1920 2420 2900 3320

VeGA 1-6940 SERIES CAGE CONTROL VALVES

SECTION C –

PRESSURE DROP TABLES

Section C – Pressure Drop Tables

C-2

SECTION A – GENERAL DESCTIPTION SECTION B – TECHNICAL TABLES

CV, FL , XT VERSUS TRAVEL

SECTION C – TECHNICAL TABLES PRESSURE DROP TABLES 9 Page

1-6941 and 1-6942 Type : Contoured – Flow to Open 10 - IV leakage class 3 - V leakage class 4 1-6943 Type: Standard Series – Flow to Open

- IV leakage class N - non balanced 5 - IV leakage class D - energized carbon graphite rings 5 - IV-S1 leakage class E - bronze loaded PTFE ring 6 - IV-S1 leakage class C - carbon graphite rings with back seal 6 - V leakage class N - non balanced 7 - V leakage class S - pressure energized PTFE ring 7 - V leakage class R - metallic C-ring 8 - VI leakage class N - non balanced 8 - VI leakage class S - pressure energized PTFE ring 9 1-6943 Type: High Seating Series – Flow to Open

- V HS leakage class N - non balanced 9 - V HS leakage class S - pressure energized PTFE ring 10 - V HS leakage class R - metallic C-ring 10 1-6948 Type: Balanced with Pilot – Flow to Close

- V leakage class Linear flow characteristic 11 - V leakage class Equal percentage flow characteristic 11

9 Tabulated values refers to room temperature conditions. Temperature influence on balancing inserts performances has not been taken into account. See relevant documentation for further information. Maximum differential pressures ∆P=P1-P2 are calculated under the assumption P2=0. When P2 is significantly higher than zero please contact Parcol Technical Department. 10 Flatted plugs availables only for 1-6941 type

PARCOL

C- 3

1-6941 and 1-6942 Type Plug Contoured Leakage class IV IEC 60534-

DN Port Travel Actuator type AIR TO OPEN (reverse) AIR TO CLOSE (direct) Spring Supply ∆∆∆∆Pshut-off Spring Supply ∆∆∆∆Pshut-off

in mm Series Size psi psi bar psi psi bar Ø3 mm 17 1-X-210 D250 15 ÷ 30 35 258 6 ÷ 30 50 258 Ø4 mm 17 1-X-210 D250 15 ÷ 30 35 258 6 ÷ 30 50 258 Ø6 mm 17 1-X-210 D250 15 ÷ 30 35 258 6 ÷ 30 50 258 Ø9 mm 17 1-X-210 D250 15 ÷ 30 35 258 6 ÷ 30 50 258

D250 15 ÷ 30 35 150 6 ÷ 30 50 196

1/2 3/4 1

Ø12 mm 17 1-X-210 D310 15 ÷ 30 35 258 6 ÷ 30 50 258 D250 15 ÷ 30 35 128 6 ÷ 30 50 170

1/2 1/2" 17 1-X-210 D310 15 ÷ 30 35 204 6 ÷ 30 50 258 D250 15 ÷ 30 35 80 6 ÷ 30 50 107

3/4" 17 1-X-210 D310 15 ÷ 30 35 127 6 ÷ 30 50 169 D250 15 ÷ 30 35 128 6 ÷ 30 50 171

3/4 1/2" 17 1-X-210

D310 15 ÷ 30 35 204 6 ÷ 30 50 272 D250 15 ÷ 30 35 54 6 ÷ 30 50 72

1" 17 1-X-210 D310 15 ÷ 30 35 87 6 ÷ 30 50 116 D250 15 ÷ 30 35 80 6 ÷ 30 50 107

3/4" 17 1-X-210 D310 15 ÷ 30 35 127 6 ÷ 30 50 169 D250 15 ÷ 30 35 128 6 ÷ 30 50 171

1

1/2" 17 1-X-210 D310 15 ÷ 30 35 204 6 ÷ 30 50 272 D310 15 ÷ 30 35 36 6 ÷ 30 50 43 D390 15 ÷ 30 35 65 6 ÷ 30 50 78 1 1/2" 25 1-X-210 D450 15 ÷ 30 35 98 6 ÷ 30 50 118 D310 15 ÷ 30 35 57 6 ÷ 30 50 68 D390 15 ÷ 30 35 102 6 ÷ 30 50 122 1 1/4" 25 1-X-210 D450 15 ÷ 30 35 154 6 ÷ 30 50 185 D310 15 ÷ 30 35 85 6 ÷ 30 50 102 D390 15 ÷ 30 35 152 6 ÷ 30 50 182

1 1/2

1" 25 1-X-210 D450 13 ÷ 30 35 228 6 ÷ 30 50 274 D310 15 ÷ 30 35 22 6 ÷ 30 50 26 D390 15 ÷ 30 35 39 6 ÷ 30 50 47 2" 25 1-X-210 D450 15 ÷ 30 35 59 6 ÷ 30 50 71 D310 15 ÷ 30 35 36 6 ÷ 30 50 43 D390 15 ÷ 30 35 65 6 ÷ 30 50 78 1 1/2" 25 1-X-210 D450 15 ÷ 30 35 98 6 ÷ 30 50 118 D310 15 ÷ 30 35 57 6 ÷ 30 50 68 D390 15 ÷ 30 35 102 6 ÷ 30 50 122

2

1 1/4" 25 1-X-210 D450 15 ÷ 30 35 154 6 ÷ 30 50 185 D390 11 ÷ 32 40 15 6 ÷ 30 50 18 D450 15 ÷ 30 35 23 6 ÷ 30 50 28 3" 34 1-X-210 D600 15 ÷ 30 35 40 6 ÷ 30 50 48 D390 15 ÷ 30 35 22 6 ÷ 30 50 26 D450 15 ÷ 30 35 33 6 ÷ 30 50 40 2 1/2" 34 1-X-210 D600 15 ÷ 30 35 58 6 ÷ 30 50 70 D390 15 ÷ 30 35 40 6 ÷ 30 50 48 D450 15 ÷ 30 35 60 6 ÷ 30 50 72

3

2" 34 1-X-210 D600 15 ÷ 30 35 103 6 ÷ 30 50 124 D390 15 ÷ 30 35 9.3 6 ÷ 30 50 11 D450 15 ÷ 30 35 17 6 ÷ 30 50 20 4" 45 1-X-210 D600 15 ÷ 30 35 28 6 ÷ 30 50 34 D390 15 ÷ 30 35 13 6 ÷ 30 50 16 D450 15 ÷ 30 35 24 6 ÷ 30 50 29 3" 45 1-X-210 D600 15 ÷ 30 35 40 6 ÷ 30 50 48 D390 15 ÷ 30 35 19 6 ÷ 30 50 23 D450 15 ÷ 30 35 35 6 ÷ 30 50 42

4

2 1/2" 45 1-X-210 D600 15 ÷ 30 35 59 6 ÷ 30 50 71


C-4

1-6941 and 1-6942 Type Plug Contoured Leakage class V IEC 60534-


in mm Series Size psi psi bar psi psi bar Ø3 mm 17 1-X-210 D250 15 ÷ 30 35 258 6 ÷ 30 50 258 Ø4 mm 17 1-X-210 D250 15 ÷ 30 35 258 6 ÷ 30 50 258 Ø6 mm 17 1-X-210 D250 15 ÷ 30 35 258 6 ÷ 30 50 258

D250 15 ÷ 30 35 216 6 ÷ 30 50 258 Ø9 mm 17 1-X-210

D310 15 ÷ 30 35 258 6 ÷ 30 50 258 D250 15 ÷ 30 35 122 6 ÷ 30 50 167

1/2 3/4 1

Ø12 mm 17 1-X-210 D310 15 ÷ 30 35 221 6 ÷ 30 50 258 D250 15 ÷ 30 35 110 6 ÷ 30 50 146

1/2 1/2" 17 1-X-210 D310 15 ÷ 30 35 186 6 ÷ 30 50 247 D250 15 ÷ 30 35 66 6 ÷ 30 50 88

3/4" 17 1-X-210 D310 15 ÷ 30 35 113 6 ÷ 30 50 150 D250 15 ÷ 30 35 110 6 ÷ 30 50 146

3/4 1/2" 17 1-X-210

D310 15 ÷ 30 35 186 6 ÷ 30 50 247 D250 15 ÷ 30 35 42 6 ÷ 30 50 56

1" 17 1-X-210 D310 15 ÷ 30 35 75 6 ÷ 30 50 100 D250 15 ÷ 30 35 66 6 ÷ 30 50 88

3/4" 17 1-X-210 D310 15 ÷ 30 35 113 6 ÷ 30 50 150 D250 15 ÷ 30 35 110 6 ÷ 30 50 146

1

1/2" 17 1-X-210 D310 15 ÷ 30 35 186 6 ÷ 30 50 247 D310 15 ÷ 30 35 29 6 ÷ 30 50 35 D390 15 ÷ 30 35 58 6 ÷ 30 50 70 1 1/2" 25 1-X-210 D450 15 ÷ 30 35 90 6 ÷ 30 50 108 D310 15 ÷ 30 35 47 6 ÷ 30 50 56 D390 15 ÷ 30 35 93 6 ÷ 30 50 112 1 1/4" 25 1-X-210 D450 15 ÷ 30 35 144 6 ÷ 30 50 173 D310 15 ÷ 30 35 73 6 ÷ 30 50 88 D390 15 ÷ 30 35 140 6 ÷ 30 50 168

1 1/2

1" 25 1-X-210 D450 13 ÷ 30 35 216 6 ÷ 30 50 259 D310 15 ÷ 30 35 16 6 ÷ 30 50 19 D390 15 ÷ 30 35 33 6 ÷ 30 50 40 2" 25 1-X-210 D450 15 ÷ 30 35 53 6 ÷ 30 50 64 D310 15 ÷ 30 35 29 6 ÷ 30 50 35 D390 15 ÷ 30 35 58 6 ÷ 30 50 70 1 1/2" 25 1-X-210 D450 15 ÷ 30 35 90 6 ÷ 30 50 108 D310 15 ÷ 30 35 47 6 ÷ 30 50 56 D390 15 ÷ 30 35 93 6 ÷ 30 50 112

2

1 1/4" 25 1-X-210 D450 15 ÷ 30 35 144 6 ÷ 30 50 173 D390 11 ÷ 32 40 11 6 ÷ 30 50 13 D450 15 ÷ 30 35 19 6 ÷ 30 50 23 3" 34 1-X-210 D600 15 ÷ 30 35 36 6 ÷ 30 50 43 D390 15 ÷ 30 35 18 6 ÷ 30 50 22 D450 15 ÷ 30 35 29 6 ÷ 30 50 35 2 1/2" 34 1-X-210 D600 15 ÷ 30 35 54 6 ÷ 30 50 65 D390 15 ÷ 30 35 34 6 ÷ 30 50 41 D450 15 ÷ 30 35 54 6 ÷ 30 50 65

3

2" 34 1-X-210 D600 15 ÷ 30 35 97 6 ÷ 30 50 116 D390 15 ÷ 30 35 5.5 6 ÷ 30 50 7 D450 15 ÷ 30 35 13 6 ÷ 30 50 16 4" 45 1-X-210 D600 15 ÷ 30 35 24 6 ÷ 30 50 29 D390 15 ÷ 30 35 9.7 6 ÷ 30 50 12 D450 15 ÷ 30 35 20 6 ÷ 30 50 24 3" 45 1-X-210 D600 15 ÷ 30 35 37 6 ÷ 30 50 44 D390 15 ÷ 30 35 15 6 ÷ 30 50 18 D450 15 ÷ 30 35 30 6 ÷ 30 50 36

4

2 1/2" 45 1-X-210 D600 15 ÷ 30 35 54 6 ÷ 30 50 65

PARCOL

C- 5

1-6941 and 1-6942 Type

Plug Contoured Leakage class VI IEC 60534-


in mm Series Size psi psi bar psi psi bar D250 15 ÷ 30 35 172 6 ÷ 30 50 216

Ø3mm 17 1-X-210 D310 15 ÷ 30 35 258 6 ÷ 30 50 258 D250 15 ÷ 30 35 155 6 ÷ 30 50 195

Ø4mm 17 1-X-210 D310 15 ÷ 30 35 240 6 ÷ 30 50 258 D250 15 ÷ 30 35 128 6 ÷ 30 50 162

Ø6mm 17 1-X-210 D310 15 ÷ 30 35 200 6 ÷ 30 50 258 D250 15 ÷ 30 35 93 6 ÷ 30 50 121

Ø9mm 17 1-X-210 D310 15 ÷ 30 35 151 6 ÷ 30 50 209 D250 15 ÷ 30 35 - 6 ÷ 30 50 91

1/2 3/4 1

Ø12mm 17 1-X-210 D310 15 ÷ 30 35 116 6 ÷ 30 50 163 D250 15 ÷ 30 35 - 6 ÷ 30 50 -

1/2 1/2" 17 1-X-210 D310 15 ÷ 30 35 88 6 ÷ 30 50 128 D250 15 ÷ 30 35 216 6 ÷ 30 50 258

3/4" 17 1-X-210 D310 15 ÷ 30 35 258 6 ÷ 30 50 258 D250 15 ÷ 30 35 - 6 ÷ 30 50 -

3/4 1/2" 17 1-X-210

D310 15 ÷ 30 35 88 6 ÷ 30 50 128 D250 15 ÷ 30 35 - 6 ÷ 30 50 -

1" 17 1-X-210 D310 15 ÷ 30 35 - 6 ÷ 30 50 70 D250 15 ÷ 30 35 216 6 ÷ 30 50 258

3/4" 17 1-X-210 D310 15 ÷ 30 35 258 6 ÷ 30 50 258 D250 15 ÷ 30 35 - 6 ÷ 30 50 -

1

1/2" 17 1-X-210 D310 15 ÷ 30 35 88 6 ÷ 30 50 128 D310 15 ÷ 30 35 - 6 ÷ 30 50 - D390 15 ÷ 30 35 - 6 ÷ 30 50 - 1 1/2" 25 1-X-210 D450 15 ÷ 30 35 - 6 ÷ 30 50 79 D310 15 ÷ 30 35 - 6 ÷ 30 50 - D390 15 ÷ 30 35 - 6 ÷ 30 50 72 1 1/4" 25 1-X-210 D450 15 ÷ 30 35 84 6 ÷ 30 50 111 D310 15 ÷ 30 35 - 6 ÷ 30 50 - D390 15 ÷ 30 35 72 6 ÷ 30 50 94

1 1/2

1" 25 1-X-210 D450 15 ÷ 30 35 110 6 ÷ 30 50 143 D310 15 ÷ 30 35 - 6 ÷ 30 50 - D390 15 ÷ 30 35 - 6 ÷ 30 50 - 1 1/2" 25 1-X-210 D450 15 ÷ 30 35 - 6 ÷ 30 50 79 D310 15 ÷ 30 35 - 6 ÷ 30 50 - D390 15 ÷ 30 35 - 6 ÷ 30 50 72

2

1 1/4" 25 1-X-210 D450 15 ÷ 30 35 84 6 ÷ 30 50 111


C-6

1-6943 TYPE Plug non-balanced Balancing seal Leakage class IV IEC 60534-4 Type none Code N

Port Travel Actuator type AIR TO OPEN (reverse) AIR TO CLOSE (direct) Spring range Supply ∆∆∆∆P shut -off Spring range Supply ∆∆∆∆P shut -off

in mm Series Size psi psi bar psi psi bar 1/2 17 1-X-210 D310 15 ÷ 30 35 172 6 ÷ 30 50 249

D310 15 ÷ 30 35 91 6 ÷ 30 50 132 3/4 17 1-X-210

D390 15 ÷ 30 35 158 6 ÷ 30 50 210 D390 15 ÷ 30 35 80 6 ÷ 30 50 101

1 34 1-X-210 D450 15 ÷ 30 35 122 6 ÷ 30 50 153 D390 15 ÷ 30 35 46 6 ÷ 30 50 58

1 1/2 34 1-X-210 D450 15 ÷ 30 35 69 6 ÷ 30 50 87 D390 15 ÷ 30 35 16 6 ÷ 30 50 21

2 34 1-X-210 D450 15 ÷ 30 35 25 6 ÷ 30 50 31 D390 13 ÷ 30 35 8 6 ÷ 30 50 12

3 45 1-X-210 D450 15 ÷ 30 35 16 6 ÷ 30 50 19 D450 11 ÷ 32 35 7 6 ÷ 30 50 11

4 60 1-X-210 D600 15 ÷ 30 35 18 6 ÷ 30 50 22 D450 11 ÷ 32 35 4 6 ÷ 30 50 7

6 60 1-X-210 D600 15 ÷ 30 35 12 6 ÷ 30 50 15

Plug balanced Balancing seal Leakage class IV IEC 60534-4 Type energ. carbon graphite rings Code D



1 1/2 34 1-X-210 D450 15 ÷ 30 35 200 6 ÷ 30 50 200 D390 15 ÷ 30 35 200 6 ÷ 30 50 200

2 34 1-X-210 D450 15 ÷ 30 35 200 6 ÷ 30 50 200 D390 13 ÷ 30 35 164 6 ÷ 30 50 148

3 45 1-X-210 D450 15 ÷ 30 35 200 6 ÷ 30 50 200 D450 11 ÷ 32 35 199 6 ÷ 30 50 168

4 60 1-X-210 D600 15 ÷ 30 35 200 6 ÷ 30 50 200 D450 11 ÷ 32 35 183 6 ÷ 30 50 134

6 60 1-X-210 D600 15 ÷ 30 35 200 6 ÷ 30 50 200

8 76 1-X-210 D600 15 ÷ 32 35 200 6 ÷ 30 50 186 10 100 1-X-250 D63 15 ÷ 34 35 200 6 ÷ 30 50 156 12 120 1-X-250 D63 15 ÷ 38 35 200 5 ÷ 34 50 156 14 150 1-X-250 D63 15 ÷ 30 35 153 6 ÷ 30 50 108 16 200 1-X-250 D63 10 ÷ 29 35 81 6 ÷ 30 50 87 20 250 1-X-400 C450 29 ÷ 51 87 138 7 ÷ 44 87 93 24 300 1-X-400 C450 29 ÷ 51 87 130 7 ÷ 44 87 74

PARCOL

C- 7

1-6943 TYPE Plug balanced Balancing seal Leakage class IV-S1 IEC 60534-4 Type bronze loaded PTFE rings Code E



1 1/2 34 1-X-210 D450 15 ÷ 30 35 100 6 ÷ 30 50 100 D390 15 ÷ 30 35 100 6 ÷ 30 50 100

2 34 1-X-210 D450 15 ÷ 30 35 100 6 ÷ 30 50 100 D390 13 ÷ 30 35 100 6 ÷ 30 50 100

3 45 1-X-210 D450 15 ÷ 30 35 100 6 ÷ 30 50 100 D450 11 ÷ 32 35 100 6 ÷ 30 50 100

4 60 1-X-210 D600 15 ÷ 30 35 100 6 ÷ 30 50 100 D450 11 ÷ 32 35 100 6 ÷ 30 50 100

6 60 1-X-210 D600 15 ÷ 30 35 100 6 ÷ 30 50 100

8 76 1-X-210 D600 15 ÷ 32 35 100 6 ÷ 30 50 100 10 100 1-X-250 D63 15 ÷ 34 35 100 6 ÷ 30 50 100 12 120 1-X-250 D63 15 ÷ 38 35 100 5 ÷ 34 50 100 14 150 1-X-250 D63 15 ÷ 30 35 100 6 ÷ 30 50 100 16 200 1-X-250 D63 10 ÷ 29 35 100 6 ÷ 30 50 87 20 250 1-X-400 C450 29 ÷ 51 87 100 7 ÷ 44 87 93 24 300 1-X-400 C450 29 ÷ 51 87 100 7 ÷ 44 87 74

Plug balanced Balancing seal Leakage class IV-S1 IEC 60534-4 Type carbon graphite + back seal Code C



2 34 1-X-210 D450 15 ÷ 30 35 200 6 ÷ 30 50 200 D390 13 ÷ 30 35 144 6 ÷ 30 50 148

3 45 1-X-210 D450 15 ÷ 30 35 200 6 ÷ 30 50 200 D450 11 ÷ 32 35 173 6 ÷ 30 50 168

4 60 1-X-210 D600 15 ÷ 30 35 200 6 ÷ 30 50 200 D450 11 ÷ 32 35 156 6 ÷ 30 50 134

6 60 1-X-210 D600 15 ÷ 30 35 200 6 ÷ 30 50 200

8 76 1-X-210 D600 15 ÷ 32 35 200 6 ÷ 30 50 186 10 100 1-X-250 D63 15 ÷ 34 35 200 6 ÷ 30 50 156 12 120 1-X-250 D63 15 ÷ 38 35 191 5 ÷ 34 50 156 14 150 1-X-250 D63 15 ÷ 30 35 135 6 ÷ 30 50 108 16 200 1-X-250 D63 10 ÷ 29 35 70 6 ÷ 30 50 87 20 250 1-X-400 C450 29 ÷ 51 87 123 7 ÷ 44 87 93 24 300 1-X-400 C450 29 ÷ 51 87 114 7 ÷ 44 87 74


C-8

1-6943 TYPE Plug non-balanced Balancing seal Leakage class V IEC 60534-4 Type none Code N



D310 15 ÷ 30 35 89 6 ÷ 30 50 132 3/4 17 1-X-210

D390 15 ÷ 30 35 158 6 ÷ 30 50 210 D390 15 ÷ 30 35 77 6 ÷ 30 50 100

1 34 1-X-210 D450 15 ÷ 30 35 122 6 ÷ 30 50 153 D390 15 ÷ 30 35 39 6 ÷ 30 50 52

1 1/2 34 1-X-210 D450 15 ÷ 30 35 66 6 ÷ 30 50 85 D390 15 ÷ 30 35 11 6 ÷ 30 50 15

2 34 1-X-210 D450 15 ÷ 30 35 20 6 ÷ 30 50 27 D390 13 ÷ 30 35 4 6 ÷ 30 50 8

3 45 1-X-210 D450 15 ÷ 30 35 11 6 ÷ 30 50 15 D450 11 ÷ 32 35 3 6 ÷ 30 50 8

4 60 1-X-210 D600 15 ÷ 30 35 14 6 ÷ 30 50 19 D450 11 ÷ 32 35 2 6 ÷ 30 50 5

6 60 1-X-210 D600 15 ÷ 30 35 9 6 ÷ 30 50 12

Plug balanced Balancing seal Leakage class V IEC 60534-4 Type pressure energized PTFE ring Code S



1 1/2 34 1-X-210 D450 15 ÷ 30 35 250 6 ÷ 30 50 250 D390 15 ÷ 30 35 241 6 ÷ 30 50 214

2 34 1-X-210 D450 15 ÷ 30 35 250 6 ÷ 30 50 250 D390 13 ÷ 30 35 197 6 ÷ 30 50 148

3 45 1-X-210 D450 15 ÷ 30 35 250 6 ÷ 30 50 219 D450 11 ÷ 32 35 250 6 ÷ 30 50 168

4 60 1-X-210 D600 15 ÷ 30 35 250 6 ÷ 30 50 250 D450 11 ÷ 32 35 232 6 ÷ 30 50 134

6 60 1-X-210 D600 15 ÷ 30 35 250 6 ÷ 30 50 250

8 76 1-X-210 D600 15 ÷ 32 35 250 6 ÷ 30 50 186 10 100 1-X-250 D63 15 ÷ 34 35 250 6 ÷ 30 50 156 12 120 1-X-250 D63 15 ÷ 38 35 244 5 ÷ 34 50 156 14 150 1-X-250 D63 15 ÷ 30 35 180 6 ÷ 30 50 108 16 200 1-X-250 D63 10 ÷ 29 35 - (88) 6 ÷ 30 50 87 20 250 1-X-400 C450 29 ÷ 51 87 158 7 ÷ 44 87 93 24 300 1-X-400 C450 29 ÷ 51 87 151 7 ÷ 44 87 74

PARCOL

C- 9

1-6943 TYPE Plug balanced Balancing seal Leakage class V IEC 60534-4 Type metallic C-ring Code R



1 1/2 34 1-X-210 D450 15 ÷ 30 35 200 6 ÷ 30 50 200 D390 15 ÷ 30 35 183 6 ÷ 30 50 200

2 34 1-X-210 D450 15 ÷ 30 35 200 6 ÷ 30 50 200 D390 13 ÷ 30 35 - 6 ÷ 30 50 200

3 45 1-X-210 D450 15 ÷ 30 35 200 6 ÷ 30 50 200 D450 11 ÷ 32 35 186 6 ÷ 30 50 200

4 60 1-X-210 D600 15 ÷ 30 35 200 6 ÷ 30 50 200 D450 11 ÷ 32 35 - 6 ÷ 30 50 172

6 60 1-X-210 D600 15 ÷ 30 35 200 6 ÷ 30 50 200

8 76 1-X-210 D600 15 ÷ 32 35 192 6 ÷ 30 50 200 10 100 1-X-250 D63 15 ÷ 34 35 183 6 ÷ 30 50 200 12 120 1-X-250 D63 15 ÷ 38 35 149 5 ÷ 34 50 200 14 150 1-X-250 D63 15 ÷ 30 35 130 6 ÷ 30 50 199

1-X-250 D63 10 ÷ 29 35 - 6 ÷ 30 50 145 16 200

1-X-400 C450 29 ÷ 51 87 196 7 ÷ 44 87 183 Plug non-balanced Balancing seal Leakage class VI IEC 60534-4 Type none Code N

Port Travel Actuator type AIR TO OPEN (reverse) AIR TO CLOSE (direct) Spring range Supply ∆∆∆∆P shut -of f Spring range Supply ∆∆∆∆P shut -off


D310 15 ÷ 30 35 86 6 ÷ 30 50 120 3/4 17 1-X-210

D390 15 ÷ 30 35 120 6 ÷ 30 50 120 D390 15 ÷ 30 35 76 6 ÷ 30 50 99

1 34 1-X-210 D450 15 ÷ 30 35 120 6 ÷ 30 50 120 D390 15 ÷ 30 35 39 6 ÷ 30 50 52

1 1/22 34 1-X-210 D450 15 ÷ 30 35 65 6 ÷ 30 50 85 D390 15 ÷ 30 35 10 6 ÷ 30 50 15

2 34 1-X-210 D450 15 ÷ 30 35 20 6 ÷ 30 50 26 D390 13 ÷ 30 35 4 6 ÷ 30 50 8

3 45 1-X-210 D450 15 ÷ 30 35 11 6 ÷ 30 50 14 D450 11 ÷ 32 35 3 6 ÷ 30 50 8

4 60 1-X-210 D600 15 ÷ 30 35 14 6 ÷ 30 50 19 D450 11 ÷ 32 35 - 6 ÷ 30 50 4

6 60 1-X-210 D600 15 ÷ 30 35 9 6 ÷ 30 50 12


C-10

1-6943 TYPE Plug balanced Balancing seal Leakage c lass VI IEC 60534-4 Type pressure energized PTFE ring Code S



1 1/2 34 1-X-210 D450 15 ÷ 30 35 120 6 ÷ 30 50 120 D390 15 ÷ 30 35 120 6 ÷ 30 50 120

2 34 1-X-210 D450 15 ÷ 30 35 120 6 ÷ 30 50 120 D390 13 ÷ 30 35 120 6 ÷ 30 50 120

3 45 1-X-210 D450 15 ÷ 30 35 120 6 ÷ 30 50 120 D450 11 ÷ 32 35 120 6 ÷ 30 50 120

4 60 1-X-210 D600 15 ÷ 30 35 120 6 ÷ 30 50 120 D450 11 ÷ 32 35 120 6 ÷ 30 50 120

6 60 1-X-210 D600 15 ÷ 30 35 120 6 ÷ 30 50 120

8 76 1-X-210 D600 15 ÷ 32 35 120 6 ÷ 30 50 120 10 100 1-X-250 D63 15 ÷ 34 35 120 6 ÷ 30 50 120 12 120 1-X-250 D63 15 ÷ 38 35 120 5 ÷ 34 50 120 14 150 1-X-250 D63 15 ÷ 30 35 120 6 ÷ 30 50 108 16 200 1-X-250 D63 10 ÷ 29 35 - 6 ÷ 30 50 87 20 250 1-X-400 C450 29 ÷ 51 87 120 7 ÷ 44 87 93 24 300 1-X-400 C450 29 ÷ 51 87 120 7 ÷ 44 87 74

1-6943 High Seating Series Plug non-balanced Balancing seal Leakage class V HS IEC 60534-4 Type none Code N



D310 15 ÷ 30 35 91 6 ÷ 30 50 132 3/4 17 1-X-210

D390 15 ÷ 30 35 158 6 ÷ 30 50 210 D390 15 ÷ 30 35 80 6 ÷ 30 50 101

1 34 1-X-210 D450 15 ÷ 30 35 122 6 ÷ 30 50 153 D390 15 ÷ 30 35 - 6 ÷ 30 50 -

1 1/2 34 1-X-210 D450 15 ÷ 30 35 - 6 ÷ 30 50 87

Plug balanced Balancing seal Leakage class V HS IEC 60534-4 Type pressure energized PTFE ring Code S



1 1/2 34 1-X-210 D450 15 ÷ 30 35 222 6 ÷ 30 50 250 D390 15 ÷ 30 35 129 6 ÷ 30 50 156

2 34 1-X-210 D450 15 ÷ 30 35 180 6 ÷ 30 50 210 D390 13 ÷ 30 35 103 6 ÷ 30 50 144

3 45 1-X-210 D450 15 ÷ 30 35 172 6 ÷ 30 50 194 D450 11 ÷ 32 35 119 6 ÷ 30 50 168

4 60 1-X-210 D600 15 ÷ 30 35 223 6 ÷ 30 50 250 D450 11 ÷ 32 35 106 6 ÷ 30 50 134

6 60 1-X-210 D600 15 ÷ 30 35 207 6 ÷ 30 50 236

8 76 1-X-210 D600 15 ÷ 32 35 178 6 ÷ 30 50 186 10 100 1-X-250 D63 15 ÷ 34 35 148 6 ÷ 30 50 156 12 120 1-X-250 D63 15 ÷ 38 35 143 5 ÷ 34 50 142 14 150 1-X-250 D63 15 ÷ 30 35 109 6 ÷ 30 50 108 16 200 1-X-250 D63 10 ÷ 29 35 - 6 ÷ 30 50 87 20 250 1-X-400 C450 29 ÷ 51 87 97 7 ÷ 44 87 93 24 300 1-X-400 C450 29 ÷ 51 87 91 7 ÷ 44 87 74

PARCOL

C- 11

1-6943 High Seating Series Plug balanced Balancing seal Leakage class V HS IEC 60534-4 Type metallic C-ring Code R


In mm Series Size psi psi bar psi psi bar D390 15 ÷ 30 35 154 6 ÷ 30 50 190

1 1/2 34 1-X-210 D450 15 ÷ 30 35 200 6 ÷ 30 50 200 D390 15 ÷ 30 35 106 6 ÷ 30 50 144

2 34 1-X-210 D450 15 ÷ 30 35 172 6 ÷ 30 50 200 D390 13 ÷ 30 35 38 6 ÷ 30 50 122

3 45 1-X-210 D450 15 ÷ 30 35 158 6 ÷ 30 50 184 D450 11 ÷ 32 35 78 6 ÷ 30 50 156

4 60 1-X-210 D600 15 ÷ 30 35 200 6 ÷ 30 50 200 D450 11 ÷ 32 35 - 6 ÷ 30 50 134

6 60 1-X-210 D600 15 ÷ 30 35 194 6 ÷ 30 50 200

8 76 1-X-210 D600 15 ÷ 32 35 157 6 ÷ 30 50 186 10 100 1-X-250 D63 15 ÷ 34 45 126 6 ÷ 30 50 157 12 120 1-X-250 D63 15 ÷ 38 35 113 5 ÷ 34 50 112

1-6948 TYPE (FOR SERVICE ON COMPRESSIBLE FLUIDS ONLY ) 1

Plug Balanced with pilot Balancing Seal Typ e - Leakage class V IEC 60534-4 Characteristic Linear

Port Travel Actuator type AIR TO OPEN (reverse) AIR TO CLOSE (direct) Spring Supply ∆∆∆∆P shut -off Spring range Supply ∆∆∆∆P shut -off

in mm Series Size psi psi bar psi psi Bar 2 34 1-X-210 D450 15 ÷ 30 35 250 6 ÷ 30 50 250 3 45 1-X-210 D450 15 ÷ 30 35 242 6 ÷ 30 50 242 4 60 1-X-210 D450 11 ÷ 32 40 90 6 ÷ 30 50 90 6 60 1-X-210 D600 15 ÷ 30 35 123 6 ÷ 30 50 123 8 76 1-X-210 D600 15 ÷ 32 40 47 6 ÷ 30 50 47

10 100 1-X-250 D63 15 ÷ 34 40 31 6 ÷ 30 50 31 12 120 1-X-250 D63 15 ÷ 38 45 33 6 ÷ 30 50 33 14 150 1-X-250 D63 14 ÷ 28 35 15 6 ÷ 30 50 15 16 200 1-X-250 D63 10 ÷ 29 35 7 6 ÷ 30 50 7 20 250 1-X-400 C450 29 ÷ 51 87 3 7 ÷ 44 87 3 20 250 1-X-400 C600 29 ÷ 51 87 5 7 ÷ 44 87 5 24 250 1-X-400 C450 29 ÷ 51 87 3 7 ÷ 44 87 3 24 250 1-X-400 C600 29 ÷ 51 87 6 7 ÷ 44 87 6

Plug Balanced with pilot Balancing Seal Type - Leakage class V IEC 60534-4 Characteristic Equal Percentage


in mm Series Size psi psi bar Psi psi Bar 2 34 1-X-210 D450 15 ÷ 30 35 250 6 ÷ 30 50 250 3 45 1-X-210 D450 15 ÷ 30 35 250 6 ÷ 30 50 250 4 60 1-X-210 D450 11 ÷ 32 40 250 6 ÷ 30 50 250 6 60 1-X-210 D600 15 ÷ 30 35 250 6 ÷ 30 50 250 8 76 1-X-210 D600 15 ÷ 32 40 142 6 ÷ 30 50 142

10 100 1-X-250 D63 15 ÷ 34 40 93 6 ÷ 30 50 93 12 120 1-X-250 D63 15 ÷ 38 45 99 6 ÷ 30 50 99 14 150 1-X-250 D63 14 ÷ 28 35 46 6 ÷ 30 50 46 16 200 1-X-250 D63 10 ÷ 29 35 21 6 ÷ 30 50 21 20 250 1-X-400 C450 29 ÷ 51 87 10 7 ÷ 44 87 10 20 250 1-X-400 C600 29 ÷ 51 87 17 7 ÷ 44 87 17 24 250 1-X-400 C450 29 ÷ 51 87 11 7 ÷ 44 87 11 24 250 1-X-400 C600 29 ÷ 51 87 18 7 ÷ 44 87 18

1For critical services (such as steam turbine vent or similar), when maximum shut-off differential pressures exceeds 70% of listed value, pneumatic actuator must be provided with hydraulic speed regulation


Issue 04-2009 ACA 0337/C

1-6940 GB 2009 4 - Parcol - homeparcol.com/test/docs/1-6940_GB.pdfSA 193 B16 SA 479 XM-19 3 BODY...

Documents

Transcript of 1-6940 GB 2009 4 - Parcol - homeparcol.com/test/docs/1-6940_GB.pdfSA 193 B16 SA 479 XM-19 3 BODY...