1 2 3 4 5 6 7 8 - Microsoft · 2016. 3. 2. · 2 FE-00039-02 2 spy box 2" White Gaffer's Tape 3...
4
TITLE MODEL NAME FE-00039 SHEET OF 1 4 SCALE 1:32 THIS DOCUMENT IS SUPPLIED IN CONFIDENCE. NO REPRODUCTION OF THIS DOCUMENT IN PART OR IN WHOLE OR THEREON OF THE ITEMS SHOWN MAY BE MADE WITHOUT THE COPYRIGHT OWNERS WRITTEN PERMISSION MODEL NAME FE-00039 TITLE PROJECT APPROVED BY ISSUE DRAWN BY CHECKED BY DATE DATE DATE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE IN INCHES. TOLERANCES ARE: X.X +/- 0.1 X.XX +/- 0.01 X.XXX +/- 0.001 ANG +/- 1 DO NOT SCALE 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 B C D E B C D E 2016 FRC Field Assembly 2016 FRC Field Assembly Rev Zone Description Date Initial A - See Sheet 2. Added Sheet 4. 03/01/2016 DAF ASME STANDARD,INCH
Transcript of 1 2 3 4 5 6 7 8 - Microsoft · 2016. 3. 2. · 2 FE-00039-02 2 spy box 2" White Gaffer's Tape 3...
-
TITLEMODEL NAME
FE-00039
SHEET OF1 4SCALE 1:32THIS DOCUMENT IS SUPPLIED IN CONFIDENCE. NO REPRODUCTION OF THIS DOCUMENT IN PART OR IN WHOLE OR THEREON OF THE ITEMS SHOWN MAY BE MADE WITHOUT THE COPYRIGHT OWNERS WRITTEN PERMISSION
MODEL NAME
FE-00039
TITLE
PROJECT
APPROVED BY
ISSUE
DRAWN BY
CHECKED BY
DATE
DATE
DATE
UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE IN INCHES. TOLERANCES ARE: X.X +/- 0.1 X.XX +/- 0.01 X.XXX +/- 0.001 ANG +/- 1
DO NOT SCALE
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
B
C
D
E
B
C
D
E
2016 FRC Field Assembly
2016 FRC Field Assembly
Rev Zone Description Date InitialA - See Sheet 2. Added Sheet 4. 03/01/2016 DAF
ASME STANDARD,INCH
-
TITLEMODEL NAME
FE-00039
SHEET OF2 4SCALE 1:32THIS DOCUMENT IS SUPPLIED IN CONFIDENCE. NO REPRODUCTION OF THIS DOCUMENT IN PART OR IN WHOLE OR THEREON OF THE ITEMS SHOWN MAY BE MADE WITHOUT THE COPYRIGHT OWNERS WRITTEN PERMISSION
MODEL NAME
FE-00039
TITLE
PROJECT
APPROVED BY
ISSUE
DRAWN BY
CHECKED BY
DATE
DATE
DATE
UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE IN INCHES. TOLERANCES ARE: X.X +/- 0.1 X.XX +/- 0.01 X.XXX +/- 0.001 ANG +/- 1
DO NOT SCALE
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
B
C
D
E
B
C
D
E
2016 FRC Field Assembly
2016 FRC Field Assembly
ITEMNO PART NUMBER QTY DESCRIPTION NOTES
1 FE-00039-01 3 Midline 2" Green Gaffer's Tape2 FE-00039-02 2 spy box 2" White Gaffer's Tape3 FE-00039-03 2 starting line 2" White Gaffer's Tape4 FE-00039-04 2 starting line 2 2" White Gaffer's Tape5 FE-00039-05 2 alignment line 2" Green Gaffer's Tape6 GE-16002 1 2016 field border assembly See Drawing7 GE-16085 2 berm assembly See Drawing8 GE-16148 1 Outer Works 1 See Drawing9 GE-16149 1 Outer Works 2 See Drawing
10 GE-16180 6 boulder Game Piece11 GE-16241 4 Spacer, U-Bolt See Drawing12 HW-00120 4 U-Bolt McMaster #8875T857
Rev Zone Description Date InitialsA A-6 Added Items 11 and 12 03/01/2016
DAF
A
1
2
3
4
5
6
7
8
9
10
-
TITLEMODEL NAME
FE-00039
SHEET OF3 4SCALE 1:32THIS DOCUMENT IS SUPPLIED IN CONFIDENCE. NO REPRODUCTION OF THIS DOCUMENT IN PART OR IN WHOLE OR THEREON OF THE ITEMS SHOWN MAY BE MADE WITHOUT THE COPYRIGHT OWNERS WRITTEN PERMISSION
MODEL NAME
FE-00039
TITLE
PROJECT
APPROVED BY
ISSUE
DRAWN BY
CHECKED BY
DATE
DATE
DATE
UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE IN INCHES. TOLERANCES ARE: X.X +/- 0.1 X.XX +/- 0.01 X.XXX +/- 0.001 ANG +/- 1
DO NOT SCALE
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
B
C
D
E
B
C
D
E
319.72+3.00-.00
30.00±.50132.00±.50
191.50±1.00
72.00±.50
24.00±.50
12.00±.50
12.00±.50
650.22+3.00-.00
1.25
22.75±.50
45.50±.50
45.50±.50
22.75±.50
45.50±.50
45.50±.50
2016 FRC Field Assembly
2016 FRC Field Assembly
NOTE: 2" White - Midline is taped across the middle of the field once built. After that, measurements can be taken to place the Auto Zone lines.
SEE DETAIL A
2" White
2" Green
2" Green
SCALE 1:8ADETAIL
NOTE: When you start adding the Platforms to the Field, be sure to leave enough room so that the ramps that overhang will fit between their assembly and the Guardrail.
-
TITLEMODEL NAME
FE-00039
SHEET OF4 4SCALE 1:32THIS DOCUMENT IS SUPPLIED IN CONFIDENCE. NO REPRODUCTION OF THIS DOCUMENT IN PART OR IN WHOLE OR THEREON OF THE ITEMS SHOWN MAY BE MADE WITHOUT THE COPYRIGHT OWNERS WRITTEN PERMISSION
MODEL NAME
FE-00039
TITLE
PROJECT
APPROVED BY
ISSUE
DRAWN BY
CHECKED BY
DATE
DATE
DATE
UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE IN INCHES. TOLERANCES ARE: X.X +/- 0.1 X.XX +/- 0.01 X.XXX +/- 0.001 ANG +/- 1
DO NOT SCALE
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
B
C
D
E
B
C
D
E
15.0From top of Platformto centerline of U-Bolt
2016 FRC Field Assembly
2016 FRC Field Assembly
Low Bar Brace AssemblyTypical for all Low Bars
SCALE 1:4
11
12 U-Bolt protrudes 3/8"2 Places
U-Bolt nut protrudes a maximumof 1/2" past the surface of the Shield.
Sheet 1Viewsnew_view_13
Sheet 2Viewsnew_view_6
Sheet 3Viewsbottom_9new_view_8A
Sheet 4Viewsnew_view_15
