1 2 2 1 - gdlp01.c-wss.comgdlp01.c-wss.com/gds/0/0300013550/02/iP2800_GS_U2a-1_V2.pdf · ON/RESUME...
Transcript of 1 2 2 1 - gdlp01.c-wss.comgdlp01.c-wss.com/gds/0/0300013550/02/iP2800_GS_U2a-1_V2.pdf · ON/RESUME...
![Page 1: 1 2 2 1 - gdlp01.c-wss.comgdlp01.c-wss.com/gds/0/0300013550/02/iP2800_GS_U2a-1_V2.pdf · ON/RESUME button to turn OFF the printer, then redo from . Check that the POWER lamp (A) lights](https://reader031.fdocuments.in/reader031/viewer/2022013021/5ecc9732f85c22769a438668/html5/thumbnails/1.jpg)
3
2
1
XXXXXXXX © CANON INC. 2014
1
2
4
1
3
4
1
5
(B)
(A)
1
2
2
2
3
4
1
2
1
2
3
1 2
EN
ES
EN
ES
ENES
EN
ES
EN
ES
EN
ES
No conecte aún el cable USB.
Si la luz de Alarma (Alarm) parpadea (B) en naranja, pulse el botón ACTIVADO/REANUDAR (ON/RESUME) para apagar la impresora y repita desde .
Compruebe que la luz de ENCENDIDO (POWER) (A) se ilumina en verde.
Tenga cuidado con la tinta de la cinta protectora.
Inserte el cartucho FINE (FINE Cartridge) en ángulo dentro de la ranura.
Empuje el cartucho FINE (FINE Cartridge) firmemente hacia dentro y hacia arriba hasta que encaje en su sitio.
Se dispone de tutoriales en vídeo
ESPAÑOL
Guía de inicio
Do not connect the USB cable yet.
If the Alarm lamp (B) flashes orange, press the ON/RESUME button to turn OFF the printer, then redo from .
Check that the POWER lamp (A) lights green.
Be careful of ink on the protective tape.
Insert the FINE Cartridge into the slot at an angle.
Push the FINE Cartridge in and up firmly until it snaps into place.
Video Tutorials Available
ENGLISH
Getting Started
QT5-6656-V02 PRINTED IN XXXXXXXX
![Page 2: 1 2 2 1 - gdlp01.c-wss.comgdlp01.c-wss.com/gds/0/0300013550/02/iP2800_GS_U2a-1_V2.pdf · ON/RESUME button to turn OFF the printer, then redo from . Check that the POWER lamp (A) lights](https://reader031.fdocuments.in/reader031/viewer/2022013021/5ecc9732f85c22769a438668/html5/thumbnails/2.jpg)
5451
2
3
4
5
6
(B)
(A)
EN
ES
EN
ES
EN
ES
ENES
ENES
Repita de a para instalar el otro cartucho FINE (FINE Cartridge).
Si la luz de Alarma (Alarm) (B) parpadea en naranja, compruebe que ambos cartuchos FINE (FINE Cartridges) de negro y de color estén instalados correctamente.
Espere hasta que se ilumine la luz ENCENDIDO (POWER) (A) y continúe.
Cargue papel con el lado de impresión hacia arriba. Manuales
Instale el software en sus dispositivos.
Repeat to to install the other FINE Cartridge.
If the Alarm lamp (B) flashes orange, check that the both black and color FINE Cartridges are installed correctly.
Wait until the POWER lamp (A) is lit, then proceed.
Load paper with the print side facing up.Manuals
Install the software on your devices.