099-LB-TEST 17025 2017 - COATING.pdfNACE SP-0394:13-Appendix M(M2.1) Glass Transition Temperature...
5
099-LB-TEST E mirates I nternational A ccreditation C entre has accredited WELSPUN MIDDLE EAST PIPES COATING, LLC. 2nd Industrial City, Street No-39 Dammam- Kingdom of Saudi Arabia In accordance with the requirements of ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories to undertake the tests in the attached accreditation scope This Accreditation is invalid without the attached accreditation scope and shall remain in force within the validity period printed below, subject to continuing compliance with the requirements of the accreditation criteria. Validity: 24/03/2020 to 23/03/2023 Initial Accreditation Date: 24/03/2014
Transcript of 099-LB-TEST 17025 2017 - COATING.pdfNACE SP-0394:13-Appendix M(M2.1) Glass Transition Temperature...
099-LB-TEST
Emirates International Accreditation Centre
has accredited
WELSPUN MIDDLE EAST PIPES COATING, LLC.
2nd Industrial City, Street No-39
Dammam- Kingdom of Saudi Arabia
In accordance with the requirements of
ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories
to undertake the tests in the attached accreditation scope
This Accreditation is invalid without the attached accreditation scope and shall remain in force
within the validity period printed below, subject to continuing compliance with the requirements of
the accreditation criteria.
Validity: 24/03/2020 to 23/03/2023
Initial Accreditation Date: 24/03/2014
Issue no.: 02 Valid to: 23-03-2023
Type of ActivityTest
Materials/Products Test Name Test Method
Indentation Test at 23°C
& 70°C
DIN 30670 Annex I
% Elongation DIN 30670:12 - Annex F
EN ISO 527 Part 1
EN ISO 527 Part 2
Adhesion(Hot Water
Soak)
CAN CSA Z245.20 Para
12.14
ISO 21809 Part 2
NACE SP-0394:13
Bend Test NACE SPO 394:13
Appendix H-Process A
Epoxy Powder Gel Time CAN CSA Z245.20 Para
12.2:18
Epoxy Powder Cure Time CAN CSA Z245.20 Para
12.1:18
Fusion bonded Epoxy
Coating
% of Cure CAN CSA Z245.20 Para
12.7.3.2.2 & 12.7.3.3:18
Accreditation Scope
Metallurgical Testing
099-LB-TEST
Welspun Middle East Pipes Coating, LLC.
2nd Industrial City, Street No-39
Dammam- Kingdom of Saudi Arabia
Date: 24-03-2020
Mechanical Testing Extruded Polyethylene or
Polypropylene sheet
Sample
Fusion bonded Epoxy
Coating
Chemical Testing
www.eiac.gov.aeP. O. Box Dubai 67
Office +97143027445 Fax +971433623811 of 4
Issue no.: 02 Valid to: 23-03-2023
Type of ActivityTest
Materials/Products Test Name Test Method
Accreditation Scope
Metallurgical Testing
099-LB-TEST
Welspun Middle East Pipes Coating, LLC.
2nd Industrial City, Street No-39
Dammam- Kingdom of Saudi Arabia
Date: 24-03-2020
Mechanical Testing Extruded Polyethylene or
Polypropylene sheet
Sample
Fusion bonded Epoxy
Coating
Delta Tg CAN CSA Z245.20 Para
12.7.3.2.2 & 12.7.3.3:18
Moisture Content CAN CSA Z245.20 Para
12.4, Procedure B:18
ISO 21809 Part 2:
Process B
NACE SP-0394:13-
Appendix M(M2.1)
Glass Transition
Temperature (Tg1 &
Tg2)
CAN CSA Z245.20 Para
12.7.3.2.1:18
Heat of Reaction -∆H CAN CSA Z245.20 Para
12.7.3.2.1:18
Polyethylene based Co-
Polymer
Adhesive,Polyethylene,Po
lypropylene Sheet or
Molded Material Sample
Specific Gravity ASTM D 792
Method A
Epoxy Powder
Chemical Testing
www.eiac.gov.aeP. O. Box Dubai 67
Office +97143027445 Fax +971433623812 of 4
Issue no.: 02 Valid to: 23-03-2023
Type of ActivityTest
Materials/Products Test Name Test Method
Accreditation Scope
Metallurgical Testing
099-LB-TEST
Welspun Middle East Pipes Coating, LLC.
2nd Industrial City, Street No-39
Dammam- Kingdom of Saudi Arabia
Date: 24-03-2020
Mechanical Testing Extruded Polyethylene or
Polypropylene sheet
Sample
Polypropylene Based Co-
Polymer
Adhesive,Polyethylene,Po
lypropylene Sheet or
Molded Material Sample
Melt Flow Rate Test ASTM D 1238
Procedure A:132
ISO 1133 Part 1
Polyethylene,Polypropyle
ne Sheet or Molded
Material Sample
Oxidative Induction Time ASTM D3895
ISO 11357 Part 6
Fusion bonded Epoxy
Coating
Cathodic Disbondment
Test
CAN CSA Z.245.20 Para
12.8:18
ISO 21809 Part 2
Method A:14
NACE SP-0394:13
Chemical Testing
www.eiac.gov.aeP. O. Box Dubai 67
Office +97143027445 Fax +971433623813 of 4
Issue no.: 02 Valid to: 23-03-2023
Type of ActivityTest
Materials/Products Test Name Test Method
Accreditation Scope
Metallurgical Testing
099-LB-TEST
Welspun Middle East Pipes Coating, LLC.
2nd Industrial City, Street No-39
Dammam- Kingdom of Saudi Arabia
Date: 24-03-2020
Mechanical Testing Extruded Polyethylene or
Polypropylene sheet
Sample
Chemical Testing 3Layer
Polyethylene/Polypropyle
ne Coating
Cathodic Disbondment
Test
DIN 30670 Annex C:12
Issue no. Date
2 24/03/2020
1 24/03/2017
Accreditation History
Renewal accreditation and first issuance under the name of
EIAC (which was formerly known as DAC)
Granted accreditation from Dubai Accreditation Center
'DAC'
Details
www.eiac.gov.aeP. O. Box Dubai 67
Office +97143027445 Fax +971433623814 of 4
