8/13/2019 09865998

1/3

DET NORSKE VERITAS AS, Veritasveien 1, NO-1322 Hvik, Norway, Tel.: +47 67 57 99 00, Fax: +47 67 57 99 11, Org.No. NO 945 748 931 MVA www.dnv.com

Form No.: TA1411a Issue: October2009 Page 1of 3

DET NORSKE VERITASTYPE APPROVAL CERTIFICATE

CERTIFICATE NO. S-6654

This is to certify that theGangway

with type designation(s)42,5 m Telesopic Gangway

Manufactured by

Marine Aluminium A/SHaugesund, Norway

is found to comply withISO 5488 Shipbuilding - Accommodation ladders

ISO 7061:1993(E) - Shipbuilding - Aluminium shore gangways for seagoing vesselsStandard for Certification No. 2.22 Lifting Appliances

ApplicationGangway for offshore use between vessel and offshore installation/mobil platform

Hvik, 2013-05-14for Det Norske Veritas AS

This Certificate is valid until2017-06-30

Aldo MatteucciHead of Section

DNV local office:Stord

Ole-Henrik AndressenSurveyor

This Certificate is subject to terms and conditions overleaf. Any significant change in d esign or construction may render this Certificate invalid.The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed.If any person suffers loss or damage which is proved to have been c aused by any negligent act or omission of Det Norske Veritas, then Det Norske Veritas shall pay compensation to suchperson for his proved direct loss or damage. However, the compensation shall n ot exceed an amount equal to ten times the fee charged for the service in question, provided that the maximumcompensation shall never exceed USD 2 million. In this provision "Det Norske Veritas" shall mean the Foundation Det Norske Veritas as well as a ll its subsidiaries, directors, officers,employees, agents and any other acting on behalf of Det Norske Veritas.

8/13/2019 09865998

2/3

Certificate No.: S-6654File No.: 686.36Job Id.: 262.1-011953-1

DET NORSKE VERITAS AS, Veritasveien 1, NO-1322 Hvik, Norway, Tel.: +47 67 57 99 00, Fax: +47 67 57 99 11, Org.No. NO 945 748 931 MVA www.dnv.com

Form No.: TA 1411a Issue: October 2009 Page 2 of 3

Product description42,5 m telescopic Aluminium GangwayMean length 36,5mMinimum length before emergency lift off 30,5 m-31,0 mMaximum length before emergency lift off 42,0 m-42,5 mMaximum length with maximum live load 41,0 mMaximum wind speed during lift off 36 m/sMaximum wind in parekd position 55 m/sMaximum opperational design load 4,0 kN/m

2live load, sum 188,1 kN

Pipes with water uppercord 0,34 kN/m2

Flexible pipe on the telescopic part of the gangway. 3,51kNAcess platform on the end 1 kNPipe connected at the end, concentrated load 2,0 kN

Application/Limitation

The structure calculaton is done according to DNVs Standard for Certification 2.22 Lifting Appliances, Oct. 2011 The hydraulic cylinders are understood to be used only to lift and lower the gangway without load, and is assumed

delivered with manufacturers certificate.

If a DNV product certificate is required, all materials shall be delivered with material certificates equal to minimum EN-10204:2005 3.1.

If a DNV product certificate is required, all welding to be carried out by qualified welders. Reference is given to DNVsStandard for Certification 2.22 Lifting Appliances, Oct. 2011.

If a DNV product certificate is required, the gangway is subject to testing according to ISO7061:1993(E) 8.3.2.

Connection and support to the ships structure is assumed covered by separate approval.

The gangway is assumed to be function and load tested after installation onboard.

Type Approval documentation

Drawing no. Rev. Title Status

1140371-002 02Structural design report for aluminium gangway andsteel tower

For Information

1140371-100 01 Telescopic Gangway - General Arrangement For Information

1140371-101 04 Telescopic Gangway - Fixed Part Type Approved

1140371-101-1 01 Telescopic Gangway - Fixed Part Details Type Approved

1140371-102 02 Telescopic Gangway - Outer part Type Approved

1140371-103 02 Inner End Telescope - Support Details Type Approved

1140371-105 02 Fixed Part Inner End Telescope - Support Details Type Approved

1140371-124 01 Telescopic Gangway Lifting Arrangement Type Approved

1140371-200 01Telescopic Gangway Steel Tower - GeneralArrangement

For Information

1140371-260 01 Telescopic Gangway Foundation Main Drawing Type Approved

1140371-261 01 Telescopic Gangway Foundation Beams Type Approved

1140371-262 01 Telescopic Gangway Foundation Vertical Plates Type Approved

1140371-262-01 - Prefab Sketch Type Approved

1140371-262-02 - Prefab Sketch Type Approved

1140371-264 01 Telescopic Gangway Foundation, Foundation Plan For Information

1140371-264-01 - Prefab Sketch Type Approved

1140371-264-02 - Prefab Sketch Type Approved

1140371-266 01 Telescopic Gangway Foundation Section B & C Type Approved

8/13/2019 09865998

3/3

Certificate No.: S-6654File No.: 686.36Job Id.: 262.1-011953-1

DET NORSKE VERITAS AS, Veritasveien 1, NO-1322 Hvik, Norway, Tel.: +47 67 57 99 00, Fax: +47 67 57 99 11, Org.No. NO 945 748 931 MVA www.dnv.com

Form No.: TA 1411a Issue: October 2009 Page 3 of 3

Tests carried outTypetesting not relevant.Before taken into use testing according to DNV Standard for Certification 2.22. the load shall be spread uniformely ref ISO 70618.3.3.

Marking of productThe gangway shall be marked as follows:- Manufacturer's name- Safe Working Load, SWL- Product certificate number- Reference to Type Approval number.

Marking of productFor retention of the Type Approval, a DNV Surveyor shall perform a survey every second year and before the expire date ofthe certificate to verify that the condition for the approval are complied with.