08COM Prospekt GB
2
COM-1-7109-2013 GB Container mixer Type COM Ideal mixing quality for dry and moist materials at variable filling levels The COM container mixer is designed for flexible individual order production. The container mixer is particularly suitable if the weighing, mixing and filling steps each take place decoupled in separate rooms. While setup and cleaning takes place in one of the three rooms, production can continue in other areas. Mixtainers® serve as a mixing vessel. They are very precisely manufactu- red. A so-called Washtainer® may be docked for the purpose of automatic wet cleaning and drying. Liquid addition by means of a nozzle focused into the active area of the chopper Chopper to improve the mixing process by deagglomeration Dust collector on request Mixtainer® can be equipped with a lid (lid handling device available on request) SinConvex®-MultiPlane® spiral blade (patented) initiates a three- dimensional flow of the mixing goods; creating a spiral upward movement on the periphery and downward flow in the center. The machine provides very good mixing results; on request also very gently. Rotational washing nozzles are connected via sanitary flanges The mixing tool is driven und supported only from above patented COM 2000 for food flavourings Atex: If goods are dust explosive, tip speed is below 1 m/s! Three-dimensional rearrangement achieves ideal mixing quality
-
Upload
bessem-frija -
Category
Documents
-
view
216 -
download
1
Transcript of 08COM Prospekt GB
COM-
1-71
09-2
013 G
B
Container mixer Type COMIdeal mixing quality for dry and moist materials at variable filling levelsThe COM container mixer is designed for flexible individual order production. The container mixer is particularly suitable if the weighing, mixing and filling steps each take place decoupled in separate rooms. While setup and cleaning takes place in one of the three rooms, production can continue in other areas. Mixtainers® serve as a mixing vessel. They are very precisely manufactu-red. A so-called Washtainer® may be docked for the purpose of automatic wet cleaning and drying.
Liquid addition by means of a nozzle focused into the active
area of the chopper
Chopper to improve the mixing process by
deagglomeration
Dust collector on request
Mixtainer® can be equipped with a lid (lid handling device
available on request)
SinConvex®-MultiPlane® spiral blade (patented) initiates a three-
dimensional flow of the mixing goods; creating a spiral upward movement on the periphery and
downward flow in the center. The machine provides very good mixing results; on request also
very gently.
Rotational washing nozzles are connected via
sanitary flanges
The mixing tool is driven und supported only from above
patented
COM 2000 for food flavourings
Atex: If goods are
dust explosive,
tip speed is below 1 m/s!
Three-dimensional rearrangement achieves ideal mixing quality
amixon® GmbHHalberstädter Straße 5533106 PaderbornGermany
Phone: +49 (0) 5251 68 88 88 – 0Fax: +49 (0) 5251 68 88 88 – 999e-mail: [email protected] www.amixon.com
All components of the amixon®-mixers are made in Germany. The production of the machines takes place exclusively in the amixon®-factory in Paderborn, Germany.
© by amixon GmbH, Paderborn. Reprinting or transfer to electronic media only permitted after written approval. We reserve the right to make changes due to progress in process engineering and manufacturing technology.
amixo
n® pl
aces
spec
ial im
porta
nce o
n the
pilot
phas
e in t
he te
st ce
ntre.
Your
mixi
ng pr
oces
ses a
re si
mulat
ed he
re. T
his w
ay, w
e sup
port
you i
n you
r pro
duct
deve
lop-
ment
phas
e. am
ixon®
has a
main
test
cente
r in P
ader
born
(Ger
many
). Fu
rther
test
cente
rs ar
e situ
ated i
n Jap
an, T
haila
nd, In
dia an
d the
USA
.
