0671p VALSPAR - WATTYL painting€¦ · Web view · 2 days agofunctions of your word processing...
Transcript of 0671p VALSPAR - WATTYL painting€¦ · Web view · 2 days agofunctions of your word processing...
06 FINISH 0411 Waterproofing – external and tanking
0671P VALSPAR - WATTYL PAINTING
1 GENERAL
1.1 RESPONSIBILITIES
GeneralRequirement: Provide coating systems to substrates, as documented.
PerformanceRequirement: Provide WATTYL coating systems as follows:
- Consistent in colour, gloss level, texture and dry film thickness.
- Free of runs, sags, blisters, or other discontinuities.
- Paint systems which are fully opaque or at the documented level of opacity.
- Clear finishes at the level of transparency consistent with the product.
- Fully adhered.
- Resistant to environmental degradation within the manufacturer’s stated life span.
1.2 COMPANY CONTACTS
Wattyl technical contactsWebsite: www.wattyl.com.au/en/contact-us/index.html
1.3 CROSS REFERENCES
GeneralRequirement: Conform to the following:
- 0171 General requirements.
1.4 STANDARDS
PaintingGeneral: To the recommendations of those parts of AS/NZS 2311 referenced in this worksection.
1.5 MANUFACTURER'S DOCUMENTS
Technical manualsProduct Data Sheets: www.valsparprofessional.com/productfinder/
System Selector Wizard: www.valsparprofessional.com.au/valspec/
1.6 INTERPRETATION
DefinitionsGeneral: For the purposes of this worksection the definitions in AS/NZS 2310 and the following apply:
- Gloss: The optical property of a surface, characterised by its ability to reflect light specularly.
- Gloss unit: Numerical value for the amount of specular reflection relative to that of a standard surface under the same geometric conditions.
- Levels of gloss finish: When the specular direction is 60 degrees, surfaces with the following specular gloss reading is defined as follows:
. Full gloss: Over 85 gloss units.
. Gloss: Between 50 and 85 gloss units.
© NATSPEC (Apr 18) 1 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
. Semi-gloss: Between 20 and 50 gloss units.
. Low gloss (low sheen): Between 5 and 20 gloss units.
. Flat finish (matt): Up to 5 gloss units.
- Opacity: The ability of a paint or textured and membrane coating to obliterate the colour difference of a substrate.
- Paint or coating system: A product in liquid form, which when applied to a surface, forms a dry film having protective, decorative or other specific technical properties.
- Primer, prime coat: The first coat of a painting system that helps bind subsequent coats to the substrate and which may inhibit its deterioration.
- Sealer: A product used to seal substrates to prevent the following:
. Materials from bleeding through to the surface.
. Reaction of the substrate with incompatible top coats.
. Undue absorption of the following coat into the substrate.
- Substrate: The surface to which a material or product is applied.
- Undercoat: An intermediate coat formulated to prepare a primed surface or other prepared surface for the finishing coat.
1.7 SUBMISSIONS
Products and materialsGeneral: Submit the following at least 3 weeks before the paint is required:
- Paint brand name and product range quality statement.
- Safety data sheets (SDS) showing the health and safety precautions to be taken during application.
- The published recommendations for maintenance.
SamplesClear finish coatings: Submit samples of timber or timber veneer matching those to be used in the works as follows:
- Requirement: Label for identification and prepare, putty, stain, seal and coat in conformance with the documented system.
- Size: Large enough to be cut into 4 segments.
Opaque coatings: Submit labelled samples of each coating system, on representative substrates, showing surface preparation, colour, gloss level, texture, and physical properties.
Coated samples scheduleSubstrate Paint system Colour Sample size
SubcontractorsSpecialist applicators: Submit name and contact details of proposed specialist applicators.
Evidence of experience: [complete/delete]
Wet samplesGeneral: Submit two clearly labelled, 500 mL samples of each type of paint to be tested.
© NATSPEC (Apr 18) 2 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Wet samples schedulePaint type Colour
WarrantiesGeneral: Submit the coating manufacturer’s warranties as follows:
- [complete/delete]
1.8 INSPECTION
NoticeInspection: Give notice so that inspection may be made of the following:
- Painting stages:
. Completion of surface preparation.
. After application of final coat.
- Clear finishing stages:
. Before surface preparation of timber.
. Completion of surface preparation.
. After application of final coat.
- Fireshield coating stages:
. After application of Fireshield TimberClear 1FR.
. After application of Fireshield TimberClear 1FR Top coat.
2 PRODUCT
2.1 GENERAL
Product substitutionOther products: Conform to PRODUCTS, GENERAL, Substitutions in 0171 General requirements.
Storage and handlingGeneral: Store materials not in use in tightly covered containers in well-ventilated areas with temperatures maintained at the manufacturer’s recommendations.
Product identificationGeneral: Marked to show the following:
- Manufacturer’s identification.
- Product brand name.
- Product type.
- Quantity.
- Product reference code and batch number.
- Date of manufacture.
- Material composition and characteristics such as volatility, flash point, light fastness, colour and pattern.
© NATSPEC (Apr 18) 3 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
2.2 PAINTING MATERIALS
StandardsPaint types: Conform to the Australian Standard as referenced in the Wattyl paint type table.
Wattyl paint type tableGeneric paint type
Valspar product Technical Data Sheet (TDS)
Paint reference AS/NZS 2311 Table 4.2
Australian Standard
Flat latex: interior Interior Design i.d Contemporary Matt (Low VOC)
D4.54 B6 AS 3730.1
Interior Design i.d Ceiling White (Low VOC)
D4.58 AS 3730.1
Interior Design i.d Advanced Contemporary Matt (Low VOC, Anti-Bacterial & Anti-Mould)
D4.95 AS 3730.1
Solver Ultra Ceiling High Opacity White (Low VOC)
FC-4315.01 AS 3730.1
Solver Brite-Glo Scenic Flat Acrylic (Poster Black) & (Low VOC)
FC-4608.01
Solver Ultra Interior Matt Acrylic
FC-4365.01 AS 3730.1
Professional Choice Ceiling White (Low VOC)
D9.32 AS 3730.1
Permopave Non-Slip
D4.34
Rapidline TM13.30 AS 4049.3
Low sheen latex: interior
Interior Design i.d Luxury Low Sheen (Low VOC)
D4.17 B7 AS 3730.3
© NATSPEC (Apr 18) 4 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Generic paint type
Valspar product Technical Data Sheet (TDS)
Paint reference AS/NZS 2311 Table 4.2
Australian Standard
Interior Design i.d Advanced Luxury Low Sheen (Low VOC, Anti-Bacterial & Anti-Mould)
D4.93 AS 3730.3
Solver Ultra Clean Air Low Sheen Acrylic (Low VOC)
FC-4385.01 AS 3730.3
Solver Ultra Low Sheen Acrylic
FC-4375.01 AS 3730.3
Professional Choice Low Sheen Acrylic
D9.20 AS 3730.3
Satin latex: interior Interior Design i.d Silky Satin (Low VOC)
D4.18 B8 AS 3730.2
Interior Design i.d Advanced Silky Satin (Low VOC, Anti-Bacterial & Anti-Mould)
D4.94 AS 3730.2
Solver Ultra Interior Satin Acrylic
FC-4395.01 AS 3730.2
Professional Choice Satin Acrylic
D9.21 AS 3730.2
Aqua Trim Satin D4.65 AS 3730.2
Gloss latex: interior Aqua Trim Gloss D4.64 B9 AS 3730.12
Flat latex: exterior Solagard Masonry Matt
D4.41 B6 AS 3730.8
AS 3730.16
Duraguard Matt FC-4505.01 AS 3730.16
GranoShield Matt G2.27 AS/NZS 4548.1
© NATSPEC (Apr 18) 5 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Generic paint type
Valspar product Technical Data Sheet (TDS)
Paint reference AS/NZS 2311 Table 4.2
Australian Standard
Permopave Non-Slip
D4.34
Rapidline TM13.30 AS 4049.3
Low gloss latex: exterior
Solagard Low Sheen
D4.14 B7 AS 3730.8
Duraguard Low Sheen
FC-4290.01 AS 3730.16
GranoImpact G2.01 AS/NZS 4548.3
Weathergard Decking Paint
D5.53
Satin latex: exterior Solagard Satin D4.66 B8 AS/NZS 3750.9
Duraguard Satin FC-4520.01 AS 3730.16
GranoSkin Membrane
G2.14 AS/NZS 4548.3
Aqua Trim Satin D4.65 AS 3730.2
Gloss latex: exterior
Solagard Gloss D4.1 AS 3730.10
Duraguard Gloss FC-4750.01 AS 3730.16
Aqua Trim Gloss D4.65 B9 AS 3730.12
Satin latex interior trim
Aqua Trim Satin D4.65 AS 3730.2
Gloss latex interior trim
Aqua Trim Gloss D4.64 B42 AS 3730.12
Satin solvent-borne: interior
Solver Ultra Satin Enamel
FC-4212.01 B3 AS 3730.5
High gloss solvent-borne: interior
Ultra Premium High Gloss Enamel
D4.38 B5 AS 3730.6
Permopave Floor & Paving Paint
D4.08
© NATSPEC (Apr 18) 6 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Generic paint type
Valspar product Technical Data Sheet (TDS)
Paint reference AS/NZS 2311 Table 4.2
Australian Standard
High gloss solvent-borne: exterior
Solver Ultra High Gloss Enamel
FC-4220.01 B5 AS 3730.6, AS/NZS 3750.22
Killrust Epoxy Gloss Enamel
D4.59
Solver Roof & Structural Micaceous Paint
FC-4220.01
Permopave Floor & Paving Paint
D4.08
Wood primer, solvent-borne
Solver Ultra Fast Dry Undercoat
SU-4210.01 10 AS 3730.13
Solver Ultra All-Purpose Undercoat
SU-4206.01
Wood primer, latex AquaPrep Acrylic Timber Primer
D3.23 B10A AS 3730.17
Solver Ultra Primer Sealer Undercoat – PSU (Low VOC)
SU-4320.01 AS 3730.17
AS 3730.18
Concrete and masonry sealer, water borne
GranoPrime G1.02 B15
Concrete and masonry sealer, solvent borne
GranoPrime S G1.03 B15
Concrete, masonry, wallboard sealer/undercoat-latex, water borne
Interior Design Acrylic Sealer Undercoat (Low VOC)
D3.18 B16 AS 3730.18
Solver Ultra Acrylic Sealer Undercoat (ASU) (Low VOC)
SU-4325.01 AS 3730.18
Solver Preps Acrylic Plaster
SU-4360.02
© NATSPEC (Apr 18) 7 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Generic paint type
Valspar product Technical Data Sheet (TDS)
Paint reference AS/NZS 2311 Table 4.2
Australian Standard
Sealer (Low VOC)
Professional Choice Acrylic Sealer Undercoat (Low VOC)
D9.05 AS 3730.18
Concrete, masonry, wallboard sealer/undercoat-latex, solvent borne
Master Prep Pigmented Sealer
D3.21 B16 AS 3730.22
Undercoat, solvent-borne
Master Prep Multi Purpose Undercoat
D3.22 B17 AS 3730.14
Solver Ultra Fast Dry Undercoat
SU-4210.01
Solver Ultra All-Purpose Undercoat
SU-4206.01
Undercoat, latex: interior
AquaPrep Primer Sealer Undercoat (Low VOC)
D3.24 B17A AS 3730.18
Interior Design i.d Acrylic Sealer Undercoat (Low VOC)
D3.18 AS 3730.18
Solver Ultra Primer Sealer Undercoat – PSU (Low VOC)
SU-4320.01 AS 3730.17
AS 3730.18
Undercoat, latex: exterior
Interior Design i.d Acrylic Sealer Undercoat (Low VOC)
D3.18 B17A AS 3730.18
Solver Ultra Acrylic Sealer Undercoat (ASU) (Low VOC)
SU-4325.01 AS 3730.18
Solver Ultra Primer Sealer Undercoat –
SU-4320.01 AS 3730.17
© NATSPEC (Apr 18) 8 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Generic paint type
Valspar product Technical Data Sheet (TDS)
Paint reference AS/NZS 2311 Table 4.2
Australian Standard
PSU (Low VOC) AS 3730.18
Metal primer, water borne
Aqua Prep Galvanised Iron Primer
D3.26 AS 3730.15
Solver Preps Galva-Link
PR-4106.01 AS 3730.15
Metal primer, solvent borne
Killrust Etch Primer D2.08
Killrust Heavy Duty Primer
D2.11
Master Prep Metal Primer
D2.13
Solver Preps Zinc Phosphate Anti-Corrosive Metal Primer
PR-4120.01 AS/NZS 3750.19AS/NZS 3750.20
Clear varnish for timber floors, water borne (Low VOC): interior
ESTAPOL Water Based Speed Clear Gloss
D5.54
ESTAPOL Water Based Speed Clear Satin
D5.54
Clear varnish for timber trim, water borne (Low VOC): interior
ESTAPOL Water Based Xtra Clear Gloss
D5.58
ESTAPOL Water Based Xtra Clear Satin
D5.58
Two-pack clear gloss floor finish: interior
Estapol 7008 D5.07 B20 AS 3730.27
Clear varnish for timber trim: interior
ESTAPOL Moisture Cure Polyurethane High
D5.61
© NATSPEC (Apr 18) 9 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Generic paint type
Valspar product Technical Data Sheet (TDS)
Paint reference AS/NZS 2311 Table 4.2
Australian Standard
Gloss
Wood Stain for floors, water borne (Low VOC): interior
Colourwood flooring stain
D5.57
Wood Stain for trim, water borne (Low VOC): interior
Colourwood Water Based Stain and Varnish Gloss
D5.24
Transparent polyurethane varnish for timber decking & walls: exterior
Weathergard Decking 2-in-1 Stain & Varnish
D5.49
Decking paint for timber: exterior
Weathergard Decking Paint
D5.53
Transparent decking oil paint for timber: exterior
Weathergard Water-based Decking Oil
D5.52
Wattyl low VOC paint tableProduct Type Valspar products VOC gm/litre Tinted
Walls and ceilings – Interior Semi-Gloss
Interior Design Silky Satin < 1
Walls and ceilings – Interior Semi-Gloss
Interior Design i.d Advanced Silky Satin
< 1
Walls and ceilings – Interior Low Sheen
Interior Design Luxury Low Sheen
< 1
Walls and ceilings – Interior Low Sheen
Interior Design i.d Advanced Luxury Low Sheen
< 1
Walls and ceilings – Interior Low Sheen
Solver Ultra Interior Premium Clean Air Acrylic
< 3
Walls and ceilings Interior Flat-Washable
Interior Design i.d Contemporary Matt
< 1
© NATSPEC (Apr 18) 10 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Product Type Valspar products VOC gm/litre Tinted
Walls and ceilings Interior Flat-Washable
Interior Design i.d Advanced Contemporary Matt
< 1
Ceilings – Interior Flat Interior Design i.d Ceiling White < 1
Ceilings – Interior Flat Solver Ultra Ceiling Premium High Opacity White
< 3
Ceilings – Interior Flat Professional Choice Ceiling White
< 10
Trim – Interior Gloss Aqua Trim Gloss < 45
Trim – Interior Semi-gloss Aqua Trim Silky Satin < 74
Timber Primer Aqua Prep Acrylic Timber Primer < 30
Timber Primer Solver Ultra Primer Sealer Undercoat – PSU
< 20
Binding Primer Solver Preps Acrylic Plaster Sealer
< 5
Latex primer for galvanized iron and zincalume
AquaPrep Galvanised Iron Primer
< 10
Latex primer for galvanized iron and zincalume
Solver Preps Galva-Link < 60
Interior Latex Undercoat Interior Design Acrylic Sealer Undercoat
< 1
Interior Latex Undercoat Solver Ultra Acrylic Sealer Undercoat – ASU
< 45
Interior Latex Undercoat Solver Ultra Primer Sealer Undercoat – PSU
< 20
Interior Latex Undercoat Professional Choice Acrylic Sealer Undercoat – ASU
< 65
Interior Sealer Solver Ultra Acrylic Sealer Undercoat – ASU
< 45
Interior Sealer Solver Ultra Primer Sealer Undercoat – PSU
< 20
One pack performance coatings ESTAPOL Water Based Speed < 135
© NATSPEC (Apr 18) 11 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Product Type Valspar products VOC gm/litre Tinted
for floors Clear Gloss-Satin
One pack performance coatings for floors
ESTAPOL Water Based Xtra Clear Gloss-Satin
< 75
Trim – Exterior Gloss Solagard Gloss < 73
Trim – Exterior Low Sheen Solagard Low Sheen < 55
Trim – Exterior Semi Gloss Solagard Satin < 60
Exterior Latex Undercoat Solver Ultra Primer Sealer Undercoat – PSU
< 20
CombinationsGeneral: Do not combine products from different manufacturers in a system.
Clear timber finish systems: Provide only the combinations of putty, stain and sealer recommended by the manufacturer of the topcoats.
Putty and fillersMaterial: To the recommendations of the paint system manufacturer, suitable for the substrate and compatible with the primer.
TintingGeneral: Provide only products which are colour tinted by the manufacturer or supplier.
Toxic ingredientsGeneral: To the Poisons Standard March 2018 (including SUSMP 20) Part 2 Section 7.
3 EXECUTION
3.1 PREPARATION
Order of workOther trades: Before painting, complete the work of other trades as far as practicable within the area to be painted, except for the installation of fittings, floor sanding and laying flooring materials.
Clear finishes: Complete clear timber finishes before commencing opaque paint finishes in the same area.
ProtectionGeneral: Before painting, clean the area and protect it from dust contamination. Use drop sheets and masking agents to protect surfaces, including finished surfaces and adjacent finishes, during painting.
Fixtures and furniture: Remove door furniture, switch plates, light fittings and other fixtures before painting, and conform to the following:
- Labelling and storage: Attach labels or mark fixtures using a non-permanent method, identifying location and refixing instructions, if required. Store and protect against damage.
Difficult to remove fixtures: Where removal is impractical or difficult, apply surface protection before substrate preparation and painting.
© NATSPEC (Apr 18) 12 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Wet paint warningNotices: Place in a conspicuous location and do not remove until the paint is dry.
Substrate preparation – generallyGeneral: Prepare substrates to receive the painting systems.
Cleaning: Clean down the substrate surface. Do not cause damage to the substrate or the surroundings.
Filling: Fill cracks and holes with fillers, sealants, putties or grouting cements as appropriate for the finishing system and substrate, and sand smooth.
- Clear finish: Provide filler tinted to match the substrate.
Clear timber finish systems: Prepare the surface so that its attributes will show through the clear finish without blemishes, using methods including the following:
- Removal of bruises.
- Removal of discolourations, including staining by oil, grease and nailheads.
- Bleaching where necessary to match the timber colour sample.
- Puttying.
- Fine sanding, with the last abrasive no coarser than 220 grit, so that there are no scratches across the grain.
Treated surfaces: If surfaces have been treated with preservatives or fire retardants, make sure coating is compatible with the treatment and does not adversely affect its performance.
Unpainted surfacesStandard: To AS/NZS 2311 Section 3.
Previously painted surfacesCondition of substrate: [complete/delete]
Location of substrate in good condition: [complete/delete].
Location of substrate in poor condition: [complete/delete].
Preparation of a substrate in good condition: To AS/NZS 2311 clause 7.4.
Preparation of a substrate in poor condition: To AS/NZS 2311 clause 7.5.
Preparation of steel substrates with protective coatings: To AS 2312.1 Section 8 and AS 1627.1.
PVC-U: Clean with methylated spirit and a nylon scouring pad.
Wallcovering: Remove wallcovering and residual paste with clean water. Patch and repair substrate to a uniform surface before painting.
Lime wash paints: Remove by brushing with warm water.
Reconditioned damaged surfaces in galvanized steel: To AS/NZS 4680 Appendix E.
Cleaning external surfacesSound external surfaces other than timber: Remove dirt, grease, loose and foreign matter, efflorescence and mould by water blasting or steam cleaning without damaging the surface. Remove remaining loose material with appropriate hand tools. Use sanding blocks to preserve the arrises of masonry and stone details.
Efflorescence: Eliminate the source of salt and water before cleaning. Allow surface to dry for 15 to 30 days before repainting.
New masonry: Allow 30 days for the masonry to cure and pH level to stabilise before painting.
Particular preparation requirements schedule
© NATSPEC (Apr 18) 13 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Substrate Preparation method Applicable standard
3.2 PAINTING
Light levelsGeneral: ≥ 400 lux.
Substrate moisture contentRequirement: Use a moisture meter to demonstrate that the moisture content of the substrate is at or below the recommended maximum level for the type of paint and the substrate material.
Painting conditionsGeneral: Unless the paint is recommended for such conditions, do not paint under the following conditions:
- Dusty conditions.
- Relative humidity: > 85%.
- Surface temperature: < 10°C or > 35°C.
Priming before fixingGeneral: Apply one coat of wood primer, and 2 coats to end grain, to the back of the following before fixing in position:
- External fascia boards.
- Timber door and window frames.
- Bottoms of external doors.
- Associated trims and glazing beads.
- Timber board cladding.
SandingClear finishes: Sand the sealer using abrasives no coarser than 320 grit without cutting through the colour. Take special care with round surfaces and edges.
SprayingGeneral: If the paint application is by spraying, use conventional or airless equipment which conforms to the following:
- Satisfactorily atomises paint being applied.
- Does not require paint to be thinned beyond the maximum amount recommended by the manufacturer.
- Does not introduce oil, water or other contaminants into the applied paint.
Paint with known health hazards: Provide personal protection, masking, ventilating and screening facilities to AS/NZS 4114.1 and AS/NZS 4114.2.
RepairRequirement: Clean off marks, paint spots and stains progressively and restore damaged surfaces to their original condition.
Maintenance painting: To AS/NZS 2311 Section 8.
© NATSPEC (Apr 18) 14 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Repair of galvanizingCleaning: For galvanized surfaces which have been subsequently welded, power tool grind to remove all surface contaminants, including rust and weld splatter. Prime affected area immediately after cleaning.
Primer: Type 2 organic zinc-rich coating for the protection of steel to AS/NZS 3750.9.
TintingGeneral: Tint each coat of an opaque coating system so that each has a noticeably different tint from the preceding coat, except for top coats in systems with more than one top coat.
ServicesGeneral: Paint all new services and equipment, including those in plant rooms, if not embedded, except chromium, anodised aluminium, GRP, PVC-U, stainless steel, non-metallic flexible materials and normally lubricated machined surfaces.
Proprietary items: Repaint only if damaged.
WindowsOperation: Make sure opening windows function correctly before and after painting.
DoorsDrying: Maintain door leaf in the open position during drying. Do not allow door hardware or accessories to damage the door finish during the drying process.
3.3 COMPLETION
CleaningGeneral: On completion of painting, remove splatters by washing, scraping or other methods which do not scratch or damage adjacent finished surfaces.
Reinstatement: Repair, replace or refinish any damage, including works of other trades. Touch up new damaged decorative paintwork or misses only with the paint batch used in the original application.
Fixtures: Refix removed and undamaged fixture in the original location, make sure they are properly fitted and in proper working order.
Protection and maskingGeneral: Remove masking and protection coverings before paint has dried.
Disposal of paint and waste materials.Requirement: Conform to requirements of the local government authority.
4 SELECTIONS
4.1 PAINTING SYSTEMS
GeneralNumber of coats: Except where one or two coat systems are documented, each paint system consists of at least 3 coats.
Final coat selection: To the INTERIOR PAINTING SCHEDULE and the EXTERIOR PAINTING SCHEDULE.
Low VOC emitting paintsGeneral: Provide the VOC limits as documented in the Interior painting schedule and the Exterior painting schedule.
Previously painted surfacesStandard: To AS/NZS 2311 Tables 8.2 and 8.3.
Other requirements: Apply the following:
© NATSPEC (Apr 18) 15 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
- Sealer: [complete/delete]
- Undercoat: [complete/delete]
Specialised painting systemsStandard: To AS/NZS 2311 clause 5.2. Provide the following final coats:
- High build textured or membrane finishes for concrete and masonry: B38 using products conforming to the AS 4548 series.
- Two-pack gloss pigmented polyurethane: B44.
- Two-pack epoxy: B29.
- Two-pack water based epoxy: B29A.
4.2 COLOUR RANGE
Paint colours scheduleSubstrate Number of colours
4.3 INTERIOR PAINTING SCHEDULE
Ultra premium interior (Low VOC)Paint code Substrate Final coat Painting system Colour reference
Previously Painted Water Based Acrylic Finishes
Interior Design i.d Ceiling White
WAU1001.2
Paper-Faced Plasterboard
Interior Design i.d Ceiling White
WAU1001.4
Hard Set Plaster (Water-Based Primer)
Interior Design i.d Ceiling White
WAU1001.7.2
Brickwork Blockwork
Interior Design i.d Ceiling White
WAU1001.8
Off-Form Concrete (OFC)
Interior Design i.d Ceiling White
WAU1001.10
Fibre Cement Sheet (FCS)
Interior Design i.d Ceiling White
WAU1001.11
Previously Painted Water Based Acrylic Finishes
Interior Design i.d Contemporary Matt
WAU1002.2
© NATSPEC (Apr 18) 16 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint code Substrate Final coat Painting system Colour reference
Paper-Faced Plasterboard
Interior Design i.d Contemporary Matt
WAU1002.4
Hard Set Plaster (Water-Based Primer)
Interior Design i.d Contemporary Matt
WAU1002.7.2
Brickwork Blockwork
Interior Design i.d Contemporary Matt
WAU1002.8
Cement Render Interior Design i.d Contemporary Matt
WAU1002.9
Off-Form Concrete (OFC)
Interior Design i.d Contemporary Matt
WAU1002.10
Fibre Cement Sheet (FCS)
Interior Design i.d Contemporary Matt
WAU1002.11
Tilt-Up And Pre-Cast Concrete
Interior Design i.d Contemporary Matt
WAU1002.12
Previously Painted Water Based Acrylic Finishes
Interior Design i.d Luxury Low Sheen
WAU1003.2
Paper-Faced Plasterboard
Interior Design i.d Luxury Low Sheen
WAU1003.4
Timber Interior Design i.d Luxury Low Sheen
WAU1003.5
Hard Set Plaster (Water-Based Primer)
Interior Design i.d Luxury Low Sheen
WAU1003.7.2
Brickwork Blockwork
Interior Design i.d Luxury Low Sheen
WAU1003.8
Cement Render Interior Design i.d Luxury Low Sheen
WAU1003.9
Off-Form Concrete (OFC)
Interior Design i.d Luxury Low Sheen
WAU1003.10
Fibre Cement Sheet (FCS)
Interior Design i.d Luxury Low Sheen
WAU1003.11
© NATSPEC (Apr 18) 17 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint code Substrate Final coat Painting system Colour reference
Tilt-Up And Pre-Cast Concrete
Interior Design i.d Luxury Low Sheen
WAU1003.12
Previously Painted Water Based Acrylic Finishes
Interior Design i.d Silky Satin
WAU1004.2
Paper-Faced Plasterboard
Interior Design i.d Silky Satin
WAU1004.4
Timber Interior Design i.d Silky Satin
WAU1004.5
Hard Set Plaster (Water-Based Primer)
Interior Design i.d Silky Satin
WAU1004.7.2
Brickwork Blockwork
Interior Design i.d Silky Satin
WAU1004.8
Cement Render Interior Design i.d Silky Satin
WAU1004.9
Off-Form Concrete (OFC)
Interior Design i.d Silky Satin
WAU1004.10
Fibre Cement Sheet (FCS)
Interior Design i.d Silky Satin
WAU1004.11
Tilt-Up And Pre-Cast Concrete
Interior Design i.d Silky Satin
WAU1004.12
Ultra premium Interior (Low VOC) water based enamelPaint Code Substrate Final coat Painting system Colour reference
Shop primed steel Aqua Trim Silky Satin
WAU1026.3
Plasterboard Aqua Trim Silky Satin
WAU1026.4
Timber Aqua Trim Silky Satin
WAU1026.5
MDF Aqua Trim Silky WAU1026.6
© NATSPEC (Apr 18) 18 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint Code Substrate Final coat Painting system Colour reference
Satin
Galvanized steel Aqua Trim Silky Satin
WAU1026.13
Iron and steel Aqua Trim Silky Satin
WAU1026.16
Shop primed steel Aqua Trim Gloss WAU1027.3
Plasterboard Aqua Trim Gloss WAU1027.4
Timber Aqua Trim Gloss WAU1027.5
MDF Aqua Trim Gloss WAU1027.6
Galvanized steel Aqua Trim Gloss WAU1027.13
Iron and steel Aqua Trim Gloss WAU1027.16
Ultra premium interior (Low VOC, anti-bacterial & anti-mould)Paint code Substrate Final coat Painting system Colour reference
Previously Painted Water Based Acrylic Finishes
Interior Design i.d Advanced Contemporary Matt
WAU1005.2
Paper-Faced Plasterboard
Interior Design i.d Advanced Contemporary Matt
WAU1005.4
Hard Set Plaster Interior Design i.d Advanced Contemporary Matt
WAU1005.7
Hard Set Plaster (Water-Based Primer)
Interior Design i.d Advanced Contemporary Matt
WAU1005.7.2
Brickwork Blockwork
Interior Design i.d Advanced Contemporary Matt
WAU1005.8
Cement Render Interior Design i.d Advanced
WAU1005.8
© NATSPEC (Apr 18) 19 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint code Substrate Final coat Painting system Colour reference
Contemporary Matt
Off-Form Concrete (OFC)
Interior Design i.d Advanced Contemporary Matt
WAU1005.9
Fibre Cement Sheet (FCS)
Interior Design i.d Advanced Contemporary Matt
WAU1005.11
Tilt-Up And Pre-Cast Concrete
Interior Design i.d Advanced Contemporary Matt
WAU1005.12
Previously Painted Water Based Acrylic Finishes
Interior Design i.d Advanced Luxury Low Sheen
WAU1006.2
Paper-Faced Plasterboard
Interior Design i.d Advanced Luxury Low Sheen
WAU1006.4
Timber Interior Design i.d Advanced Luxury Low Sheen
WAU1006.5
Hard Set Plaster Interior Design i.d Advanced Luxury Low Sheen
WAU1006.7
Hard Set Plaster (Water-Based Primer)
Interior Design i.d Advanced Luxury Low Sheen
WAU1006.7.2
Brickwork Blockwork
Interior Design i.d Advanced Luxury Low Sheen
WAU1006.8
Cement Render Interior Design i.d Advanced Luxury Low Sheen
WAU1006.9
Off-Form Concrete (OFC)
Interior Design i.d Advanced Luxury Low Sheen
WAU1006.10
Fibre Cement Sheet (FCS)
Interior Design i.d Advanced Luxury
WAU1006.11
© NATSPEC (Apr 18) 20 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint code Substrate Final coat Painting system Colour reference
Low Sheen
Tilt-Up And Pre-Cast Concrete
Interior Design i.d Advanced Luxury Low Sheen
WAU1006.12
Previously Painted Water Based Acrylic Finishes
Interior Design i.d Advanced Silky Satin
WAU1007.2
Paper-Faced Plasterboard
Interior Design i.d Advanced Silky Satin
WAU1007.4
Timber Interior Design i.d Advanced Silky Satin
WAU1007.5
Hard Set Plaster Interior Design i.d Advanced Silky Satin
WAU1007.7
Hard Set Plaster (Water-Based Primer)
Interior Design i.d Advanced Silky Satin
WAU1007.7.2
Brickwork Blockwork
Interior Design i.d Advanced Silky Satin
WAU1007.8
Cement Render Interior Design i.d Advanced Silky Satin
WAU1007.9
Off-Form Concrete (OFC)
Interior Design i.d Advanced Silky Satin
WAU1007.10
Fibre Cement Sheet (FCS)
Interior Design i.d Advanced Silky Satin
WAU1007.11
Tilt-Up And Pre-Cast Concrete
Interior Design i.d Advanced Silky Satin
WAU1007.12
© NATSPEC (Apr 18) 21 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Ultra premium interiorPaint code
Ultra premium interior enamelPaint code Substrate Final coat Painting system Colour reference
Timber id Ultra Premium Satin Enamel
WAU1051.5
Timber id Ultra Premium High Gloss Enamel
WAU1052.5
MDF id Ultra Premium Satin Enamel
WAU1051.6
MDF id Ultra Premium High Gloss Enamel
WAU1052.6
Shop primed steel id Ultra Premium Satin Enamel
DS 030.11
Shop primed steel id Ultra Premium High Gloss Enamel
DS 035.11
Galvanized steel id Ultra Premium Satin Enamel
WAU1051.13
Galvanized steel id Ultra Premium High Gloss Enamel
WAU1052.13
Iron and steel id Ultra Premium Satin Enamel
WAU1051.16
Iron and steel id Ultra Premium High Gloss Enamel
WAU1052.16
Premium Interior painting low VOC
© NATSPEC (Apr 18) 22 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint code Substrate Final coat Painting system Colour reference
Previously Painted Water Based Acrylic Finishes
Solver Ultra Clean Air Low Sheen Acrylic
SAU2004.2
Paper-Faced Plasterboard
Solver Ultra Clean Air Low Sheen Acrylic
SAU2004.4
Timber Solver Ultra Clean Air Low Sheen Acrylic
SAU2004.5
Hard Set Plaster (Water-Based Primer)
Solver Ultra Clean Air Low Sheen Acrylic
SAU2004.7.2
Brickwork Blockwork
Solver Ultra Clean Air Low Sheen Acrylic
SAU2004.8
Cement Render Solver Ultra Clean Air Low Sheen Acrylic
SAU2004.9
Off-Form Concrete (OFC)
Solver Ultra Clean Air Low Sheen Acrylic
SAU2004.10
Fibre Cement Sheet (FCS)
Solver Ultra Clean Air Low Sheen Acrylic
SAU2004.11
Tilt-Up And Pre-Cast Concrete
Solver Ultra Clean Air Low Sheen Acrylic
SAU2004.12
Previously Painted Water Based Acrylic Finishes
Solver Ultra Ceiling High Opacity White
SAU2005.2
Paper-Faced Plasterboard
Solver Ultra Ceiling High Opacity White
SAU2005.4
Hard Set Plaster (Water-Based Primer)
Solver Ultra Ceiling High Opacity White
SAU2005.7.2
© NATSPEC (Apr 18) 23 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint code Substrate Final coat Painting system Colour reference
Brickwork Blockwork
Solver Ultra Ceiling High Opacity White
SAU2005.8
Off-Form Concrete (OFC)
Solver Ultra Ceiling High Opacity White
SAU2005.10
Fibre Cement Sheet (FCS)
Solver Ultra Ceiling High Opacity White
SAU2005.11
Fibre cement sheet Cement render Concrete
Solver Brite-Glo Scenic Flat Acrylic (Poster Black)
PS-620
Bondek® soffits (galvanized iron)
Solver Brite-Glo Scenic Flat Acrylic (Poster Black)
PS-619
Premium Interior paintingPaint code Substrate Final coat Painting system Colour reference
Previously Painted Water Based Acrylic Finishes
Solver Ultra Interior Matt Acrylic
SAU2001.2
Paper-Faced Plasterboard
Solver Ultra Interior Matt Acrylic
SAU2001.4
Hard Set Plaster Solver Ultra Interior Matt Acrylic
SAU2001.7
Brickwork Blockwork
Solver Ultra Interior Matt Acrylic
SAU2001.8
Cement Render Solver Ultra Interior Matt Acrylic
SAU2001.9
Off-Form Concrete (OFC)
Solver Ultra Interior Matt Acrylic
SAU2001.10
Fibre Cement Sheet (FCS)
Solver Ultra Interior Matt Acrylic
SAU2001.11
Tilt-Up And Pre-Cast Concrete
Solver Ultra Interior Matt Acrylic
SAU2001.12
© NATSPEC (Apr 18) 24 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint code Substrate Final coat Painting system Colour reference
Previously Painted Water Based Acrylic Finishes
Solver Ultra Low Sheen Acrylic
SAU2002.2
Paper-Faced Plasterboard
Solver Ultra Low Sheen Acrylic
SAU2002.4
Timber Solver Ultra Low Sheen Acrylic
SAU2002.5
Hard Set Plaster Solver Ultra Low Sheen Acrylic
SAU2002.7
Brickwork Blockwork
Solver Ultra Low Sheen Acrylic
SAU2002.8
Cement Render Solver Ultra Low Sheen Acrylic
SAU2002.9
Off-Form Concrete (OFC)
Solver Ultra Low Sheen Acrylic
SAU2002.10
Fibre Cement Sheet (FCS)
Solver Ultra Low Sheen Acrylic
SAU2002.11
Tilt-Up And Pre-Cast Concrete
Solver Ultra Low Sheen Acrylic
SAU2002.12
Previously Painted Water Based Acrylic Finishes
Solver Ultra Interior Satin Acrylic
SAU2003.2
Paper-Faced Plasterboard
Solver Ultra Interior Satin Acrylic
SAU2003.4
Timber Solver Ultra Interior Satin Acrylic
SAU2003.5
Hard Set Plaster Solver Ultra Interior Satin Acrylic
SAU2003.7
Brickwork Blockwork
Solver Ultra Interior Satin Acrylic
SAU2003.8
Cement Render Solver Ultra Interior Satin Acrylic
SAU2003.9
© NATSPEC (Apr 18) 25 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint code Substrate Final coat Painting system Colour reference
Off-Form Concrete (OFC)
Solver Ultra Interior Satin Acrylic
SAU2003.10
Fibre Cement Sheet (FCS)
Solver Ultra Interior Satin Acrylic
SAU2003.11
Tilt-Up And Pre-Cast Concrete
Solver Ultra Interior Satin Acrylic
SAU2003.12
Previously Painted Water Based Acrylic Finishes
Ultra Ceiling Toned White
SAU2006.2
Paper-Faced Plasterboard
Ultra Ceiling Toned White
SAU2006.4
Hard Set Plaster Ultra Ceiling Toned White
SAU2006.7
Off-Form Concrete (OFC)
Ultra Ceiling Toned White
SAU2006.10
Premium interior painting enamelPaint code
© NATSPEC (Apr 18) 26 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Trade interior painting low VOCPaint code Substrate Final coat Painting system Colour reference
Previously Painted Water Based Acrylic Finishes
Professional Choice Ceiling White
WAU1205.2
Paper-Faced Plasterboard
Professional Choice Ceiling White
WAU1205.4
Cement Render Professional Choice Ceiling White
WAU1205.9
Off-Form Concrete (OFC)
Professional Choice Ceiling White
WAU1205.10
Fibre Cement Sheet (FCS)
Professional Choice Ceiling White
WAU1205.11
Bondek® soffits (galvanized iron)
Professional Choice Ceiling White
WAU1205.13
Trade Interior paintingPaint code Substrate Final coat Painting system Colour reference
Previously Painted Water Based Acrylic Finishes
Professional Choice Low Sheen Acrylic
WAU1202.2
Paper-Faced Plasterboard
Professional Choice Low Sheen Acrylic
WAU1202.4
Brickwork Blockwork
Professional Choice Low Sheen Acrylic
WAU1202.8
Cement Render Professional Choice Low Sheen Acrylic
WAU1202.9
Off-Form Concrete (OFC)
Professional Choice Low Sheen
WAU1202.10
© NATSPEC (Apr 18) 27 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint code Substrate Final coat Painting system Colour reference
Acrylic
Fibre Cement Sheet (FCS)
Professional Choice Low Sheen Acrylic
WAU1202.11
Tilt-Up And Pre-Cast Concrete
Professional Choice Low Sheen Acrylic
WAU1202.12
Previously Painted Water Based Acrylic Finishes
Professional Choice Satin Acrylic
WAU1203.2
Paper-Faced Plasterboard
Professional Choice Satin Acrylic
WAU1203.4
Brickwork Blockwork
Professional Choice Satin Acrylic
WAU1203.8
Cement Render Professional Choice Satin Acrylic
WAU1203.9
Off-Form Concrete (OFC)
Professional Choice Satin Acrylic
WAU1203.10
Fibre Cement Sheet (FCS)
Professional Choice Satin Acrylic
WAU1203.11
Tilt-Up And Pre-Cast Concrete
Professional Choice Satin Acrylic
WAU1203.12
Trade interior painting enamelPaint code Substrate Final coat Painting system Colour reference
Timber Professional Choice Easy Flow Satin Enamel
WAU1207.5
© NATSPEC (Apr 18) 28 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint code Substrate Final coat Painting system Colour reference
Timber Professional Choice Easy Flow Gloss Enamel
WAU1208.5
Shop primed steel Professional Choice Easy Flow Satin Enamel
WAU1207.3
Shop primed steel Professional Choice Easy Flow Gloss Enamel
WAU1208.3
Galvanized steel Professional Choice Easy Flow Satin Enamel
WAU1207.13
Galvanized steel Professional Choice Easy Flow Gloss Enamel
WAU1208.13
Iron and steel Professional Choice Easy Flow Satin Enamel
WAU1207.16
Iron and steel Professional Choice Easy Flow Gloss Enamel
WAU1208.16
Premium Woodcare clear two pack polyurethane finishesPaint code Substrate Final coat Painting system Colour reference
Timber floors and trim
ESTAPOL 7008 WAU1126.5 Not applicable
Premium Woodcare clear polyurethane finishes low VOCPaint code Substrate Final coat Painting system Colour reference
Timber floors ESTAPOL Water Based Speed Clear Gloss
WAU1127.5 Not applicable
Timber floors ESTAPOL Water Based Speed Clear Satin
WAU1127.5 Not applicable
© NATSPEC (Apr 18) 29 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint code Substrate Final coat Painting system Colour reference
Timber trim ESTAPOL Water Based Xtra Clear Gloss
WAU1135.5 Not applicable
Timber trim ESTAPOL Water Based Xtra Clear Satin
WAU1135.5 Not applicable
Premium Woodcare clear varnish finishesPaint code Substrate Final coat Painting system Colour reference
Timber ESTAPOL Moisture Cure Polyurethane High Gloss
WAU1128.5 Not applicable
Premium Woodcare stain and clear timber floor finishes low VOCPaint code Substrate Final coat Painting system Stain colour
Timber ESTAPOL Water Based Speed Clear Gloss
WAU1132.5
Timber ESTAPOL Water Based Speed Clear Satin
WAU1132.5
Premium Woodcare stain and clear finishes low VOCPaint code Substrate Final coat Painting system Stain colour
Timber ESTAPOL Water Based Xtra Clear Gloss
WAU1135.5
Timber ESTAPOL Water Based Xtra Clear Satin
WAU1135.5
Two pack epoxy water based low VOCPaint code Substrate Final coat Painting system Colour reference
Concrete Wattyl EPINAMEL P32.04
© NATSPEC (Apr 18) 30 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint code Substrate Final coat Painting system Colour reference
CF720
Cement render Wattyl EPINAMEL CF720
P32.04
Two pack epoxyPaint code Substrate Final coat Painting system Colour reference
Concrete Wattyl EPINAMEL EB600
P31.01
Cement render Wattyl EPINAMEL EB600
P31.01
4.4 EXTERIOR PAINTING SCHEDULE
Ultra Premium exterior low VOCPaint code Substrate Final coat Painting system Colour reference
Previously Painted Water Based Acrylic Finishes
Solagard Masonry Matt
WAU1076.2
Brickwork Blockwork
Solagard Masonry Matt
WAU1076.8
Cement Render Solagard Masonry Matt
WAU1076.9
Off-Form Concrete (OFC)
Solagard Masonry Matt
WAU1076.10
Fibre Cement Sheet (FCS)
Solagard Masonry Matt
WAU1076.11
Tilt-Up And Pre-Cast Concrete
Solagard Masonry Matt
WAU1076.12
Galvanized Iron and Zincalume®
Solagard Masonry Matt
DS205.6
Bare Iron and Steel (not galvanized)
Solagard Masonry Matt
DS205.5
© NATSPEC (Apr 18) 31 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint code Substrate Final coat Painting system Colour reference
PVC Solagard Masonry Matt
DS205.8
Previously Painted Water Based Acrylic Finishes
Solagard Low Sheen
WAU1077.2
Timber Solagard Low Sheen
WAU1077.5
Brickwork Blockwork
Solagard Low Sheen
WAU1077.8
Cement Render Solagard Low Sheen
WAU1077.9
Off-Form Concrete (OFC)
Solagard Low Sheen
WAU1077.10
Fibre Cement Sheet (FCS)
Solagard Low Sheen
WAU1077.11
Tilt-Up And Pre-Cast Concrete
Solagard Low Sheen
WAU1077.12
Galvanized Iron and Zincalume®
Solagard Low Sheen
WAU1077.13
Bare Iron and Steel (not galvanized)
Solagard Low Sheen
WAU1077.16
PVC Solagard Low Sheen
WAU1077.17
Previously Painted Water Based Acrylic Finishes
Solagard Satin WAU1078.2
Timber Solagard Satin WAU1078.5
Brickwork Blockwork
Solagard Satin WAU1078.8
Cement Render Solagard Satin WAU1078.9
Off-Form Concrete (OFC)
Solagard Satin WAU1078.10
© NATSPEC (Apr 18) 32 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint code Substrate Final coat Painting system Colour reference
Fibre Cement Sheet (FCS)
Solagard Satin WAU1078.11
Tilt-Up And Pre-Cast Concrete
Solagard Satin WAU1078.12
Galvanized Iron and Zincalume®
Solagard Satin WAU1078.13
Bondek soffits (galvanized iron water based option)
Solagard Satin WAU1078.13
Bare Iron and Steel (not galvanized)
Solagard Satin WAU1078.16
PVC Solagard Satin WAU1078.17
Previously Painted Water Based Acrylic Finishes
Solagard Gloss WAU1079.2
Timber Solagard Gloss WAU1079.5
Brickwork Blockwork
Solagard Gloss WAU1079.8
Cement Render Solagard Gloss WAU1079.9
Off-Form Concrete (OFC)
Solagard Gloss WAU1079.10
Fibre Cement Sheet (FCS)
Solagard Gloss WAU1079.11
Tilt-Up And Pre-Cast Concrete
Solagard Gloss WAU1079.12
Galvanized Iron and Zincalume®
Solagard Gloss WAU1079.13
Bare Iron and Steel (not galvanized)
Solagard Gloss WAU1079.16
PVC Solagard Gloss WAU1079.17
© NATSPEC (Apr 18) 33 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint code Substrate Final coat Painting system Colour reference
Previously Painted Water Based Acrylic Finishes
Duraguard Matt SAU2101.2
Brickwork Blockwork
Duraguard Matt SAU2101.8
Cement Render Duraguard Matt SAU2101.9
Off-Form Concrete (OFC)
Duraguard Matt SAU2101.10
Fibre Cement Sheet (FCS)
Duraguard Matt SAU2101.11
Tilt-Up And Pre-Cast Concrete
Duraguard Matt SAU2101.12
Galvanized Iron and Zincalume®
Duraguard Matt SAU2101.13
Bare Iron and Steel (not galvanized)
Duraguard Matt SAU2101.16
PVC Duraguard Matt FC-4505.01
Previously Painted Water Based Acrylic Finishes
Duraguard Low Sheen
SAU2102.2
Timber Duraguard Low Sheen
SAU2102.5
Brickwork Blockwork
Duraguard Low Sheen
SAU2102.8
Cement Render Duraguard Low Sheen
SAU2102.9
Off-Form Concrete (OFC)
Duraguard Low Sheen
SAU2102.10
Fibre Cement Sheet (FCS)
Duraguard Low Sheen
SAU2102.11
Tilt-Up And Pre-Cast Concrete
Duraguard Low Sheen
SAU2102.12
© NATSPEC (Apr 18) 34 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint code Substrate Final coat Painting system Colour reference
Galvanized Iron and Zincalume®
Duraguard Low Sheen
SAU2102.13
Bare Iron and Steel (not galvanized)
Duraguard Low Sheen
SAU2102.16
PVC Duraguard Low Sheen
SAU2102.17
Previously Painted Water Based Acrylic Finishes
Duraguard Satin SAU2103.2
Timber Duraguard Satin SAU2103.5
Brickwork Blockwork
Duraguard Satin SAU2103.8
Cement Render Duraguard Satin SAU2103.9
Off-Form Concrete (OFC)
Duraguard Satin SAU2103.10
Fibre Cement Sheet (FCS)
Duraguard Satin SAU2103.11
Tilt-Up And Pre-Cast Concrete
Duraguard Satin SAU2103.12
Galvanized Iron and Zincalume®
Duraguard Satin SAU2103.13
Bare Iron and Steel (not galvanized)
Duraguard Satin SAU2103.16
PVC Duraguard Satin SAU2103.17
Previously Painted Water Based Acrylic Finishes
Duraguard Gloss SAU2104.2
Timber Duraguard Gloss SAU2104.5
Brickwork Blockwork
Duraguard Gloss SAU2104.8
Cement Render Duraguard Gloss SAU2104.9
© NATSPEC (Apr 18) 35 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint code Substrate Final coat Painting system Colour reference
Off-Form Concrete (OFC)
Duraguard Gloss SAU2104.10
Fibre Cement Sheet (FCS)
Duraguard Gloss SAU2104.11
Tilt-Up And Pre-Cast Concrete
Duraguard Gloss SAU2104.12
Galvanized Iron and Zincalume®
Duraguard Gloss SAU2104.13
Bare Iron and Steel (not galvanized)
Duraguard Gloss SAU2104.16
PVC Duraguard Gloss SAU2104.17
Elastomeric coating system - highest performancePaint code Substrate Final coat Painting system Colour reference
Cement render GranoSkin Membrane (Low Profile Finish)
GAU3020.9
Brick and blockwork
GranoSkin Membrane (Low Profile Finish)
GAU3020.8
Off-Form Concrete (OFC)
GranoSkin Membrane (Low Profile Finish)
GAU3020.10
Precast concrete Tilt-up concrete
GranoSkin Membrane (Low Profile Finish)
GAU3020.12
Elastomeric coating system - high performancePaint code Substrate Final coat Painting system Colour reference
Cement render GranoShield Matt (Low Profile Finish)
GAU3030.9
Brick and blockwork
GranoShield Matt (Low Profile Finish)
GAU3030.8
© NATSPEC (Apr 18) 36 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint code Substrate Final coat Painting system Colour reference
Off-Form Concrete (OFC)
GranoShield Matt (Low Profile Finish)
GAU3030.10
Precast concrete Tilt-up concrete
GranoShield Matt (Low Profile Finish)
GAU3030.12
Elastomeric coating systemPaint code Substrate Final coat Painting system Colour reference
Cement render GranoImpact (Low Profile Finish)
GAU3010.9
Brick and blockwork
GranoImpact (Low Profile Finish)
GAU3010.8
Off-Form Concrete (OFC)
GranoImpact (Low Profile Finish)
GAU3010.10
Precast concrete Tilt-up concrete
GranoImpact (Low Profile Finish)
GAU3010.12
Compressed fibre cement sheeting
GranoImpact (Low Profile Finish)
GAU3010.22
ExoTec CFC sheeting
GranoImpact (Low Profile Finish)
GAU3010.25
Elastomeric coating system – textured finishPaint code Substrate Final coat Painting system Colour reference
Off-Form Concrete (OFC)
GranoImpact (High Profile finish)
GAU3015.10
Precast concrete Tilt-up concrete
GranoImpact (High Profile finish)
GAU3015.12
Roll-on texture: High profile, smooth to coarse finishesCoating code Substrate Texture/
intermediate coat
Final coat Coating system
Colour reference
Brick and blockwork
GranoSahara Ripple
GranoImpact GAU3115.8
© NATSPEC (Apr 18) 37 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Coating code Substrate Texture/intermediate coat
Final coat Coating system
Colour reference
Cement render GranoSahara Ripple
GranoImpact GAU3115.9
Off Form Concrete (OFC)
GranoImpact High Profile
GranoImpact GAU3015.10
Off Form Concrete (OFC)
GranoSahara Ripple
GranoImpact GAU3115.10
Off Form Concrete (OFC)
GranoSoffit Texture
GAU3050.10
Off Form Concrete (OFC)
GranoRoll-on Smooth
GranoImpact GAU3141.10
Off Form Concrete (OFC)
GranoRoll-on Medium
GranoImpact GAU3151.10
Off Form Concrete (OFC)
GranoRoll-on Coarse
GranoImpact GAU3161.10
Precast concrete Tilt-up concrete
GranoImpact High Profile
GranoImpact GAU3015.12
Precast concrete Tilt-up concrete
GranoSahara Ripple
GranoImpact GAU3115.12
Precast concrete Tilt-up concrete
GranoRoll-on Smooth
GranoImpact GAU3141.12
Precast concrete Tilt-up concrete
GranoRoll-on Medium
GranoImpact GAU3151.12
Precast concrete Tilt-up concrete
GranoRoll-on Coarse
GranoImpact GAU3161.12
© NATSPEC (Apr 18) 38 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Ultra premium exterior (Low VOC) water based enamelPaint code
Ultra premium exterior enamelPaint code
Trade exterior painting enamelPaint code Substrate Final coat Painting system Colour reference
Timber Professional Choice Easy Flow Gloss Enamel
WAU1208.5
Shop primed steel Professional Choice Easy Flow Gloss Enamel
WAU1208.3
Galvanized steel Professional Choice Easy Flow Gloss Enamel
WAU1208.13
© NATSPEC (Apr 18) 39 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Paint code Substrate Final coat Painting system Colour reference
Iron and steel Professional Choice Easy Flow Gloss Enamel
WAU1208.16
Premium Woodcare exteriorPaint code Substrate Final coat Painting system Colour reference
Timber Weathergard Decking Water Based Stain
WAU1176.5
Timber Weathergard Decking Paint
WAU1177.5
Timber Weathergard Decking Oi
WAU1178.5
Timber Weathergard Water Based Decking Oi
WAU1179.5
Previously stained, oiled Timber
Weathergard Decking 2-in-1 Stain & Varnish
WAU1180.1
Timber Weathergard Decking 2-in-1 Stain & Varnish
WAU1180.5
Timber Weathergard Exterior Varnish
WAU1181.5
Paving paint water-based slip resistantPaint code Substrate Final coat Painting system Stain colour
Concrete Permopave Non-Slip
D4.34
Asphalt/bitumen Permopave Non-Slip
D4.34
Timber Permopave Non-Slip
D4.34
© NATSPEC (Apr 18) 40 "[Insert date]"
06 FINISH 0411 Waterproofing – external and tanking
Linemarking water-basedPaint code Substrate Final coat Painting system Colour reference
Concrete Rapidline TM 13.30
Asphalt/bitumen Rapidline TM 13.30
4.5 ADDITIONAL DATA
Paint system characteristics schedulePaint code Characteristic Requirements
© NATSPEC (Apr 18) 41 "[Insert date]"