06 08 06 Revised Fmc Poster
-
Upload
carlos-anez -
Category
Documents
-
view
51 -
download
1
Transcript of 06 08 06 Revised Fmc Poster
C-21 C-22 C-24 C-29
TC-2C TC-60 TC-60-WD
Conventional Wellhead Configuration Chart
BO-2 BO-10 A-3-EC A-5-EC A-4-D
Tubing Head Adapters
Tubing Hangers
Tubing Heads
Secondary Seals(optional)
Secondary Seals(optional)
Casing Hangers
Casing Heads
Bottom Prep Options
Base Plate Option
Casing Spools
Couplings
BO-2 BO-10
TC-1A
TC-ET
TC-1A-EMS TC-1A-EN TC-1A-ENS-DHCV TC-1A-ENS TC-1W
TCM-ET
Reducer BushingSlick FS
TC-60-ET TC-WD-ET
Product Specification Levels
No
No No No No
No No No
1 1 22 3
Yes Yes
Yes
Yes Yes
Yes
Yes
1
Yes Yes
NoNace?
High H2S?
Recommended PSL
Selection Chart for PSL — 5,000 psi
No
No No No No
No No No
2 2 3 3 3
Yes Yes
Yes
Yes Yes
Yes
YesYesYes
NoNace?
High H2S?
Gas Well?
Recommended PSL
Selection Chart for PSL — 10,000 psi
No
No No No No
No No No
3 3 3G 3G 3G 3G
3G
Yes Yes
Yes
Yes Yes
Yes
YesYesYes
NoNace?
High H2S?
Recommended PSL
Selection Chart for PSL — 15,000 psi
Reducer BushingS/OD - FS/ID
PI-Seal
C-21 C-22
C-22-EG C-29 C-29-ET
C-122 C-121S C-24 C-29 C-129 C-229
SBMS-II FX-RCMS
Reducer BushingSlick FS
Reducer BushingS/OD - FS/ID
PI-Seal SBMS-II FX-RCMS
C-29-ETC-22-EG C-29
Casing Hangers
API Reference ChartsMaterial
Class ApplicationBody, Bonnet, End,
& OutletPressure Controlling Parts,Stems, & Mandrel Hangers
AA
BB
CC
DD
EE
FF
HH
General Service
General Service
General Service
Sour Service
Sour Service
Sour Service
Sour Service
Carbon/Alloy Steel
Carbon/Alloy Steel
Stainless Steel
Carbon/Alloy Steel
Carbon/Alloy Steel
Stainless Steel
CRA’s
Carbon/Alloy Steel
Stainless Steel
Stainless Steel
Carbon/Alloy Steel
Stainless Steel
Stainless Steel
CRA’s
PR1
Hangers
Valves
PR2 PR2 (Annex F)
API 6A Testing Requirements
1 cycle fromminimum tomaximumrated load
3 cycles fromminimum tomaximumrated load
3 cycles from minimum tomaximum rated load; 3
temperature cycles on the sealsfrom top to bottom at high, low,
and ambient temperatures
200 open-close cycles at fulldifferential WP, including 160
cycles at ambient, 20 at themaximum temperature and 20 at the minimum temperature.
200 open-closecycles at
fulldifferential
WP
3 open-closecycles at
fulldifferential
WP
KLPRSTUVXY
-75º to 180º-50º to 180º-20º to 180º-40º to 120º
0 to 150º0 to 180º0 to 250º
35º to 250º0 to 350º0 to 650º
Temperature Class Temp (F)
Gas Well?
Gas Well?
Slip-on-Weld SliplocThreaded
B-1
TC-EC
B-2/P A-4A-4-M