054609 at G0 VAPA Product Catalog 2012 eBook

Voice Alarm & Public Address Systems

Product Catalog 2012Valid from April 2012

1

Content

General Hints

VARIODYN D1

Loudspeaker with EN 54-24 Certificate

Standard Loudspeaker

19" Rack

1

2

Digital Output Module (DOM)Loop Technology LIMPower AmplifierCall StationsMains Switching Unit (MSU)System Communication Unit (SCU)Universal Interface Module (UIM)

Additional Components / Audio DevicesPower SupplyAccessoriesConnection to Fire Detection TechnologyCable Overview

3

Wall Surface Mounted SpeakersHorn SpeakerSound Projector

4

Wall Surface Mounted SpeakersSound ProjectorHorn SpeakerSpherical SpeakerSlim Column SystemMusic Cabinet SpeakerAccessories

5

VARIODYN D1 Cabinet System – without Hinged FrameAccessories

2-4

5-42

8-910-1112-1516-24

252627

29-3132-3435-38

3940-42

43-54

48-5051-52

53

55-72

62-646566676869

70-71

73-80

76-7778-80

1

2

3

4

5

6

General Details

Ceiling Speakers

Ceiling Speakers

VARIODYN D1 Cabinet System – with Hinged Frame

6-7

44-47

56-61

74-75

1

Introduction General Information Representative Offices of Honeywell Life Safety Austria

34

2

Appendix6

Index

81-84

82-84Part Number Index 81

View Control Module (VCM) 28

www.hls-austria.com2

Dear business partner,

We are very proud to present to you, the new 2012 catalog for voice alarm and public address systems. It contains comprehensive documentation of all products required in order to realize your projects to highest possible standard compliance. It includes system equipment such as VARIODYN D1 amplifiers, power supplies, rack systems as well as loudspeakers and any accessories required to complete your project.

We are exceptionally pleased that not only does our product VARDIODYN D1 set the bar in industry techno-logy, but that it also meets and exceeds the industry’s highest safety and conformity standards. The fact that Honeywell Life Safety Austria is the first Austrian company to positively complete the system examination in accordance to ÖNORM F 3012, tested by the inspection authority for fire safety technology, is just one of many reasons to be proud of our product. Furthermore, Honeywell Life Safety Austria is also the first company in Austria to be audited and certified through the ÜBZERT of the BFBU according to ÖNORM F 3074!

Please feel free to browse and use our information offered online. On our website www.hls-austria.com you will find comprehensive resources for system construction and planning, all available in our large download area.

We are looking forward to continue successfully working with you in the future!

Your Honeywell Life Safety Austria Team

General Hints Foreword

Introduction

Filadelfie Building, Prague, Czech Republic • Civil Registry Office, Tyumen, Russia • Hilton Garden Inn Hotel, Sanliurfa, Turkey

3

Abbreviations

= List of contents which the part number includes

= Information, important notice such as special versions, dependencies etc.

= Packing unit

= Available as from...

IP type of protection

Example: IP64: Wire protection (as IP4) completely dust-proof - protected against splashing water - nearly leak-proof.

The type of protection indicates the suitability of electric operating materials (for example devices, lights and installation material) against solid foreign objects and for various ambient conditions.

Levels of protection for protection from touch and foreign bodies (1st digit)

Digit Protection from touch Protection from foreign bodies

0 No protection No protection

1 Protection from large-sized body parts Large foreign bodies (diameter 50 mm) (diameter from 50 mm)

2 Finger protection Medium-size foreign bodies (diameter 12 mm) (diameter from 12.5 mm))

3 Tools and wires Small foreign matter (diameter from 2.5) (diameter from 2.5 mm)

4 Tools and wires Grain-shaped foreign matter (diameter from 1 mm) (diameter from 1 mm)

5 (K) Wire protection (as IP 4) dust-protected Dust accumulation

6 (K) Wire protection (as IP 4) dust-proof No ingress of dust

Levels of protection for the protection from water (2nd digit)

Digit Protection from water

0 No protection

1 Protection from vertically dripping water

2 Protection from diagonally (15°) falling drip water

3 Protection from falling spray water up to 60°, against the vertical

4 Protected against splashing water

5 Protection from hose water (nozzle) from any angle

6 Protection from strong hose water (flooding)

7 Protection from temporary submersion

8 Protection from permanent submersion

1

2

3

4

5

6

1


Representative Offices of Honeywell Life Safety Austria

HeadquartersHoneywell Life Safety Austria GmbHLemböckgasse 491230 Vienna, AustriaPhone: +43 1 600 6030Fax: +43 1 600 6030-900E-mail: [email protected]: www.hls-austria.com

Czech Republic / SlovakiaRepresentative Office of Honeywell Life Safety Austria GmbHV Parku 2326/18148 00 Prague 4 - Chodov, Czech RepublicPhone: +420 242 442 280Fax: +420 242 442-119E-mail: [email protected]: www.hls-czech.com

PolandRepresentative Office of Honeywell Life Safety Austria GmbHUl.Marynarska 15, bud. New City02-674 Warsaw, PolandPhone: +48 22 313 09 70Fax: +48 22 313 09 79E-mail: [email protected]: www.hls-poland.com

RomaniaHoneywell Life Safety Romania S.R.L.Salcâmilor str. 2 bis305500 Lugoj, RomaniaPhone: +40 256 35 00 00Fax: +40 256 35 49 53E-mail: [email protected]: www.hls-romania.com

RussiaRepresentative Office of Honeywell Life Safety Austria GmbH8th floor, Kievskaya str., 7121059 Moscow, RussiaPhone: +7 495 231 26 92Fax: +7 495 795 08 81E-mail: [email protected]: www.hls-russia.com

UkraineRepresentative Office of Honeywell Life Safety Austria GmbHOffice Center „IRVA“, Block ARadyscheva str. 10/1403680 Kiev, UkrainePhone: +380 44 351 15 50Fax: +380 44 351 15 51E-mail: [email protected]: www.hls-russia.com

TurkeyRepresentative Office of Honeywell Life SafetyAustria GmbHBağdat Caddesi No: 418/A Akör Apt. D: 934740 Suadiye Kadıköy/Istanbul, TurkeyPhone: +90 216 410 61 41 Fax: +90 216 410 43 97E-mail: [email protected]: www.hls-turkey.com

Honeywell Life Safety Romania S.R.L.Floreasca Business Park169A Calea Floreasca, Building A, 2nd Floor, District 1014459 Bucharest, RomaniaPhone: +40 31 224 36 10Fax: +40 21 204 81 65E-mail: [email protected]: www.hls-romania.com

5

Digital Output Module (DOM)

Loop Technology LIM

Power Amplifier

Call Stations

Mains Switching Unit (MSU)

System Communication Unit (SCU)

Universal Interface Module (UIM)

Additional Components / Audio Devices

Power Supply

Accessories

Connection to Fire Detection Technology

Cable Overview

8-9

10-11

12-15

16-24

25

26

27

29-31

32-34

35-38

39

40-42

VARIODYN D1

1

2

3

4

5

6

General Details 6-7

2

View Control Module (VCM) 28


System VARIODYN®-3000System VARIODYN®-3000

FACPIQ8Control

SCU

Central Operator Terminal

Configurationvia Service PC

DCS15

DCSF7

UIM

UIM

CD Player

LAN TCP/IP

DOM Digital Output ModuleUIM Universal Interface ModuleFACP Fire Detector Control PanelDCS15 Digital Call StationSCU System Communication Unit

Power Amplifier

Serial essernet Interface

DAL (Digital Audio Link)Ethernet

Direct Connection

Serial Data Connectionessernet

PSU Batteries

PSU

DOM

VARIODYN D1

7

VARIODYN D1 General Details

Public address systems are used in all crowded public places such as subway stations, train stations, airports, shopping centers, stadiums and schools. In everyday operation, the system is used to provide information to the public, for advertising, and also for musical entertainment or for internal purposes such as communication with staff in extensive buil-ding complexes (paging and intercom service).

A system of this type is particularly significant during emergencies, when it is important to alert people audibly in a targeted manner. People can then be evacuated in an orderly fashion.

With VARIODYN D1, public address systems are for the first time connected to Local Area Networks (LAN) and Wide Area Networks (WAN). The systems are installed cost-effectively using standard Ethernet modules and prefabricated cabling. The modern, user-friendly configuration tools in VARIODYN D1 reduce training costs and familiarization times.

All the relevant VARIODYN D1 components are contained in the EN54-16 and VdS appro-vals, including accessories, network components and upright cabinets.

1

2

3

4

5

6

2


¬[B^§/33/FT, 583361.22.ES Digital Output Module DOM4-8

DOM is the central control element of VARIODYN D1. It has interfaces to all input/output assemblies, administers and monitors the loudspeaker circuits. For voice alarm systems as per DIN VDE 0833-4. Any complex system configuration can be implemented through the networking of multiple DOMs via the Ethernet. All power amplifiers are permanently moni-tored. In case a power amplifier is faulty, it can be replaced dynamically by a spare ampli-fier. The switchover is done automatically via the DOM. Loudspeaker cables are continually monitored for short-circuit, short-to-ground, interruption and impedance vari ation. Faulty loudspeaker areas are separated without reaction. A DOM contains storage capacity for preset announcements, which can be used for alarm texts and signals (escape alarm, caution signal) and warning signals (gongs). The volume of each source and ampli fier channel can be regulated. Other filters, e.g., parametric equalizers, high and low pass filters and delays, are also available. All disturbances are recognized within a few seconds in compliance with standards, displayed and logged. For special applications, e.g., tunnels, delays of up to 9.9 seconds can be programmed. The control unit DOM4-8 is equipped with 4 independent amplifier channels in order to operate 8 loudspeaker areas or 4 loud-speaker circuits in VARIODYN D1 Loop Technology. There is also the option of mixing loop and spur technology with a DOM.

VARIODYN D1 Digital Output Module (DOM)

Part of EN 54-16 approval 0786-CPD-20997

Approval: VdS

Accessories583451.21 Cable for rear panel of DOM4-8 cabinet583486 Cat 5 patch cable, 1 m yellow (Ethernet)583487 Cat 5 patch cable, 2 m yellow (Ethernet)583488 Cat 5 patch cable, 3 m yellow (Ethernet)583496 End of Line Module (EOL)581316 P4 Microphone for AVR583703 Mounting Kit 1583342 Loop Isolator Module

Technical DataAudio output:Output type symmetricallyNominal level 0 dBumax. Outputlevel < 6 dBuTransmission range 20 ... 20000 HzHarmonic distortion at nominal level

< 0.03 % @ 1 kHz

Signal/Noise ratio > 70 dB / 75 dB (A)Output impedance > 5 kΩ, < 500 pFSensor Input (AVC):Input type symmetricallyNominal level -51 dBuNominal level for emergency tele-phone station

0 dBu

Transmission range 100 ... 8000 HzHarmonic distortion at nominal level

< 0.02 % @ 1 kHz

Signal/Noise ratio > 60 dB / 65 dB (A)Load impedance typ. 200 ΩCommon technical data:Rated voltage 90 .. 264 V ACRated frequency 47 ... 440 HzEmergency power supply 24Power consumption 40 / 70 W (@230 V, w/o / with 4 x DAL)Contact load relay 100 V DC / 1 AAmbient temperature -5 °C ... 55 °CAir humidity 15 % ... 90 % (non condensing)Weight approx. 6.8 kgDimensions W: 483 mm H: 44 mm D: 345 mm (1 HE, 19")

Features

• Permitted as per EN 54-16• Compliant with IEC 60849• All functions of an alarm and evacuation system in

a 19"-module (DOM)• Networkable via Ethernet• Permanent monitoring of all functionally-relevant

system parts• Automatic and dynamic switching onto redundant

spare amplifier• Automatic loudspeaker regulation (ALR) also

during announcements• Remote monitoring and configuration via network

24 V DC power supply• Spur technology and/or loop technology in "VARI-

ODYN D1 Loop Technology"• Connection to a NTP server via Ethernet is

possible

11

9

¬[B_§/33/FT/ 583362.22.ES Digital Output Module DOM4-24

DOM is the central control element of VARIODYN D1. It has interfaces to allinput/output assemblies, and it administers and monitors the loudspeaker circuits. For voice alarm systems as per DIN VDE 0833-4.Any complex system configuration can be implemented through the networking of multiple DOMs via the Ethernet.All power amplifiers are permanently monitored. In case a power amplifier is faulty, it can be replaced dynamically by a spare amplifier. The switchover is done automatically via the DOM.Loudspeaker cables are continually monitored for short-circuit, short-to-ground, interrup-tion and impedance variation. Faulty loudspeaker areas are separated without reaction.A DOM contains storage capacity for preset announcements, which can be used for alarm texts and signals (escape alarm, caution signal) and warning signals (gongs). The volume of each source and amplifier channel can be regulated. Other filters, e.g., parametric equal-izers, high and low pass filters and delays, are also available. All disturbances are recog-nized within a few seconds in compliance with standards, displayed and logged. For special applications, e.g., tunnels, delays of up to 9.9 seconds can be programmed.The control unit DOM4-24 is equipped with 4 independent amplifier channels in order to operate 24 loudspeaker areas or 4 loudspeaker circuits in VARIODYN D1 Loop Technology. There is also the option of mixing loop and spur technology with a DOM.

VARIODYN D1 Digital Output Module (DOM)


Approval: VdS

Accessories583451.21 Cable for rear panel of DOM4-8 cabinet583486 Cat 5 patch cable, 1 m yellow (Ethernet)583487 Cat 5 patch cable, 2 m yellow (Ethernet)583488 Cat 5 patch cable, 3 m yellow (Ethernet)583496 End of Line Module (EOL)581316 P4 Microphone for AVR583703 Mounting Kit 1583342 Loop Isolator Module

Technical DataAudio output:Output type symmetricallyNominal level 0 dBumax. Outputlevel < 6 dBuTransmission range 20 ... 20000 HzHarmonic distortion at nominal level

< 0.03 % @ 1 kHz

Signal/Noise ratio > 70 dB / 75 dB (A)Output impedance > 5 kΩ, < 500 pFSensor Input (AVC):Input type symmetricallyNominal level -51 dBuNominal level for emergency tele-phone station

0 dBu

Transmission range 100 ... 8000 HzHarmonic distortion at nominal level

< 0.02 % @ 1 kHz

Signal/Noise ratio > 60 dB / 65 dB (A)Load impedance typ. 200 ΩCommon technical data:Rated voltage 90 .. 264 V ACRated frequency 47 ... 440 HzEmergency power supply 24Power consumption 50 / 80 W (@230 V, w/o / with 4 x DAL)Contact load relay 100 V DC / 1 AAmbient temperature -5 °C ... 55 °CAir humidity 15 % ... 90 % (non condensing)Weight approx. 6.8 kgDimensions W: 483 mm H: 44 mm D: 345 mm (1 HE, 19")

Features

• Permitted as per EN 54-16• Compliant with IEC 60849• All functions of an alarm and evacuation system in

a 19"-module (DOM)• Networkable via Ethernet• Permanent monitoring of all functionally-relevant

system parts• Automatic and dynamic switching onto redundant

spare amplifier• Automatic loudspeaker regulation (ALR) also

during announcements• Remote monitoring and configuration via network

24 V DC power supply• Spur technology and/or loop technology in "VARI-

ODYN D1 Loop Technology"• Connection to a NTP server via Ethernet is

possible

1

2

3

4

5

6

211


Loop Technology LIM

LIM

LIM LIM

LIMLIM

LIM

LIM

LIMLIM

LIM

LIM

BA 1

3 AB2 AB

BA 5 6 AB4 AB

Technology has developed rapidly in the area of electronics in recent years. This has opened up a host of new possibilities for optimizing existing technical solutions and developing new, innovative products. This trend can also be noted in the area of voice alarms.

Spur circuit versus loop wiring systemIn the past, 100 V loudspeaker lines were designed exclusively using spur technology. This led to a high risk of failure, because if one spur circuit was interrupted, all the loudspeakers after the wire break would fail. The entire spur circuit would go down in the case of a short circuit.

Minimizing the risk of failureTo minimize this risk of failure in the case of a wire break or short circuit, A/B wiring was used for a long time for based systems on DIN VDE 0833-4 (safety level 2 and 3). In the case of A/B wiring, half of the loudspeakers in a room are operated on different loudspeaker lines. This means that in the case of a basic line fault, such as a wire break or short circuit, half of the loudspeakers in the relevant area will still be in operation. If half of the loudspeakers fail and the alarms are therefore operating at half power, the sound level is reduced by 3 dB if the loudspeakers are arranged correctly. This level decrease is permitted in accordance with DIN VDE 0833-4 standards.

VARIODYN D1 loop technology is a new technology for optimizing the reliability of the loudspeaker connection.With this new type of technology, a wire-break and short-circuit-resistant loop is constructed, similar to the case of fire detection technology.

One of the first systems on the marketVARIODYN D1 is one of the first voice alarm systems on the market to have this loop wiring system technology. This new technology is based on the proven DOM4-8 which is used for creating up to 4 wire-break and short-circuit-resistant loops. On each of these 4 loops, up to 64 loop isolator modules can be used. Impedance monitoring is used in terms of monitoring technology, which, unlike other solutions, does not require coupling capacitors in the loudspeakers. The loop isolator modules monitor the loudspeaker loop in connection with the DOM and isolate the faulty piece of wire from the loop in the case of a short circuit. This means that if each loudspeaker is equipped with a loop isolator module, 100% system reliability is ensured in the case of a basic line fault.

The main advantages of this loop technology are as follows:• 100% system reliability when each loudspeaker is provided with a loop isolator module • A/B wiring can be replaced easily• E30 wiring not necessary in all cases• Considerable cost savings for wiring and installation• Second loudspeaker not necessary in small rooms

Due to the many advantages and high system reliability, it seems that VARIODYN D1 loop technology will establish itself as the industry leader in the medium and long term in the area of voice alarms just like in fire detection technology.

VA/PASpeaker loop

DOM

Loop Isolator Modul Loop Isolator Modul

Loop Isolator Modul

E 30 cable area AE 30 cable area BStandard cable area AStandard cable area B

VARIODYN D1 Loop Technology LIM

11

¬[BKO 583342 Loop Isolator Module (LIM)

Loop-isolator module for designing a short-circuit and open-circuit tolerant 100-V loud speaker loop in VARIODYN D1 Loop Technology. The modules monitor current on the loudspeaker circuits and cut off the defective conductive parts from the loudspeaker circuit in case of overcurrent due to a short-circuit, for example. Line disturbances are displayed on the DOM and VCM. Each module has a total of three bipolar clamps for connecting the loop and the loudspeaker. Wires with a diameter up to 2.5 mm² in diameter can be connected to the clamps. There is an optical display of the operating status on the module. The loop-isolator module is in a stable, compact IP-66 body with lots of wiring space and can thus also be installed in projects with difficult environmental conditions, e.g. industry.

VARIODYN D1 Loop Technology LIM

Features

• Fully-redundant 100-V loop technology• Extensive topologies are possible• Tolerant to short and open circuits• As per EN 54-17• Large savings potential with cabling and installa-

tion

1

2

3

4

5

6

2

Available for Q3 / 2012

11


¬[#7§/520 580222.41 Power Amplifier 2XH500

UsageThe power amplifiers have two independent amplifier channels and are compatible with the VARIODYN D1 system. The power amplifiers are controlled and monitored by VARIODYN D1 DOM4-8 / DOM4-24 control units.

LF /Control InputThe two low frequency inputs and the control input are connected by cable (Part No. 583491) to the VARIODYN D1 DOM module.

100 V OutputsSymmetrical ungrounded 100 V outputs are available on the “OUTPUT 100V” terminal strip. The 100 V outputs of the two double amplifiers are connected via cable (Part No. 583477.21) to the VARIODYN D1 DOM module. Once a cooling element reaches a critical temperature, the load for this channel is disconnected by relays and is once again connected by relays upon reaching a secure temperature.

Power Connection, Battery ConnectionAn IEC connector for power connection as well as a power fuse can be found on the back of the amplifier. The power cable is supplied. The power amplifier may only be operated via a three-wire AC power cable with a non-fused ground conductor.The 24 V emergency power supply is connected to a designated 2-pin terminal.

VARIODYN D1 Power Amplifier


Approval: VdS

Accessories583491 DOM-XV cable for amplifier audio inputs and remote connection583476.21 XV DOM cable for amplifier audio outputs (for 1 amplifier)583477.21 XV DOM cable for amplifier audio outputs (for 2 amplifiers)583703 Mounting Kit 1

Technical DataRated voltage 230 V ACRated frequency 50 ... 60 Hz (+10% / -5%)Rated current 9.9 APower consumption standby ca. 0 VA (power disconnected)Power output 2 x 500 W (sin)Emergency power supply 24Technology Klasse HTransmission range 20 ... 22000 HzLoad impedance > 10 kΩ (symmetrically)Channel separation > 75 dBHarmonic distortion at nominal level

< 0.05 % @ 1 kHz

Ambient temperature -5 °C ... 55 °CStorage temperature -10 °C ... 55 °CAir humidity 40 ... 90 %Color gray, similar to RAL 7016Weight approx. 17 kgDimensions W: 484 mm H: 88 mm D: 382 mm (2 HE, 19")

Features

• Complies with IEC BS EN 60268-3, 55013 and 55020 standards

• Power amplifier, 2-channel, class H, 100 V outputs

• 24 V DC emergency power supply• Control and monitoring via DOM• Integrated electronic protection against thermal

overloading and short-circuit at the output• Temperature controlled fans

Connections• Combined LF /Control input• Two-channel 100 V output• Power supply connection• 24 V DC emergency power input

Indicators• POWER• SIGNAL• CLIP• ERROR• AC POWER• DC POWER

Delivery time on request.

1

13

¬[#-§/32m

¬[#.§/32p

580212.21

580213.21

Power Amplifier 2XV200


UsagePower amplifier with two independent amplifier channels and 100 V toroidal core - output transformers. Compatible to the VARIODYN D1 system.The power amplifiers are controlled and monitored by the VARIODYN D1 DOM4-8 or DOM4-24 modules.

LF / Control InputThe two low frequency inputs and the control input are connected by cable (Part No. 583491) to the VARIODYN D1 DOM module.

100-V-OutputsSymmetrical ungrounded 100 V outputs are available on the “OUTPUT 100 V” terminal strip. The 100 V outputs of the two double amplifiers are connected via cable (Part No. 583477.21) to the VARIODYN D1 DOM module. Once a cooling element reaches a critical temperature, the load for this channel is disconnected by relays and is once again connected by relays upon reaching a secure temperature.

Power ConnectionAn IEC connector for power connection as well as a power fuse can be found on the back of the amplifier. The power cable is supplied. The power amplifier may only be operated via a three-wire AC power cable with a non-fused ground conductor.

Same as 580212.21 but 2 x 300 W.


Accessories583471.21 VARIODYN D1 DOM - XV amplifier input cable583476.21 VARIODYN D1 DOM - XV amplifier output cable583422 VARIODYN D1 RC 22 auxiliary cable583703 Mounting Kit 1

Technical DataRated voltage 230 V ACRated frequency 50 ... 60 Hz (+10% / -5%)Rated current 5.2 APower consumption standby ca. 0 VA (power disconnected)Power output 2 x 200 W (sin)Technology Klasse ABTransmission range 50 ... 22000 HzInput level 6 dBu (at max. output level 100V)Load impedance > 20 kΩ (symmetrically)Channel separation > 75 dBHarmonic distortion at nominal level

< 0.08 % @ 1 kHz

Ambient temperature -5 °C ... 55 °CStorage temperature -10 °C ... 55 °CColor grey, similar to RAL 7016Weight approx. 17 kgDimensions W: 483 mm H: 88 mm D: 400 mm (2 HE, 19")

Technical DataRated current 6.1 APower consumption standby ca. 0 VA (power disconnected)Power output 2 x 300 W (sin)Technology Klasse ABLoad impedance > 20 kΩ (symmetrically)Weight approx. 19 kg

Features

• Integrated electronic protection against thermal overloading and short-circuiting at the output

• Temperature regulated fans• Complies with IEC BS EN 60268-3, 55013, 55020

standards• Control and monitoring via DOM

Connections• Combined LF / Control input• Two-channel 100 V output• Power connection

Displays (per channel)• Green POWER LED• Yellow FAULT LED• Green SIGNAL LED• Red CLIP LED

1

2

3

4

5

6

2

Please note that this power amplifier can only be used with a 230 V voltage supply. 24 V DC emergency power supply is not possible.




1

1

1

1


¬[#/§/32s

¬[#@W

580214.21

580231


Power Amplifier 2XD250

Same as 580212.21 but 2 x 500 W.







Approval: VdS


Technical DataRated current 9.9 APower consumption standby ca. 0 VA (power disconnected)Power output 2 x 500 W (sin)Technology Klasse ABLoad impedance > 20 kΩ (symmetrically)Weight approx. 21 kg

Technical DataRated voltage 230 V ACRated frequency 50 ... 60 HzRated current 2.8 APower output 2 x 250 W (sin, @ 40 Ω)Emergency power supply 24Technology Klasse DTransmission range 50 ... 22000 HzInput level 0 dBuLoad impedance > 20 kΩ (symmetrically)Harmonic distortion at nominal level

< 0.3 % @ 1 kHz

Efficiency > 80 % (at max. level)Ambient temperature -5 °C ... 55 °CStorage temperature -10 °C ... 55 °CAir humidity < 93 % (non-condensing)

max 93%Weight approx. 16.5 kgDimensions W: 482 mm H: 89 mm D: 402 mm (2 HE, 19")

Features


• Class D double amplifier with high efficiency• Self-monitoring and self-test via microcontrollers• Protected against overload and short-circuits• Protected against overheating• Cooling via regulated fan• Monitoring via VARIODYN D1 DOM• 24 V DC emergency power supply

General Indicators• Mains Voltage (green LED)• CPU Status (green LED)• Collective Fault (yellow LED)• 24 V Emergency Power Supply (yellow LED)

Indicators per Amplifier Channel• Operation (green LED)• Amplifier Channel Status (green LED)• Amplifier Channel Fault (yellow LED)• Clip indicator (yellow LED)



1

1

1

1

15

¬[#AZ 580232 Power Amplifier 2XD400







Approval: VdS


Technical DataRated voltage 230 V ACRated frequency 50 ... 60 HzRated current 4.5 APower output 2 x 400 W (sin, @ 25 Ω)Emergency power supply 24Technology Klasse DTransmission range 50 ... 22000 HzInput level 0 dBuLoad impedance > 20 kΩ (symmetrically)Harmonic distortion at nominal level

< 0.3 % @ 1 kHz

Efficiency > 80 % (at max. level)Ambient temperature -5 °C ... 55 °CStorage temperature -10 °C ... 55 °CAir humidity < 93 % (non-condensing)

max 93%Weight approx. 19 kgDimensions W: 482 mm H: 89 mm D: 402 mm (2 HE, 19")

Features


• Class D double amplifier with high efficiency• Self-monitoring and self-test via microcontrollers• Protected against overload and short-circuits• Protected against overheating• Cooling via regulated fan• Monitoring via VARIODYN D1 DOM• 24 V DC emergency power supply

General Indicators• Mains Voltage (green LED)• CPU Status (green LED)• Collective Fault (yellow LED)• 24 V Emergency Power Supply (yellow LED)

Indicators per Amplifier Channel• Operation (green LED)• Amplifier Channel Status (green LED)• Amplifier Channel Fault (yellow LED)• Clip indicator (yellow LED)

1

2

3

4

5

6

211


¬[B"§/32#Digital Call Stations

583301.21 Digital Call Station DCS15

The Digital Call Station DCS15 is used to select loudspeaker circuits as well as for the issuing of voice announcements and of various tones and/or alarms. It is equipped with 12 freely configurable keys, 13 LEDs and a swan neck microphone. The communication unit can be connected to a free DOM (Digital Output Module) DAL bus (Digital Audio Link) via a standard Cat 5 cable. All audio signals as well as all control signals are transferred digitally.

Up to four digital call stations can be connected to one DOM. Every digital call station can simultaneously produce and receive different voice signal through-connections and control signals within the system. One digital call station can be relocated by up to 300 m via a Cat 5 cable (expansion up to 2,000 m possible using fiber optic cabling) and can be expanded with up to six DKM18 digital key modules; this increases the total number of available keys and LEDs to 120 per communication unit. The function of the microphone in the digital call station is permanently monitored acoustically. The DCS15 furthermore provides an external audio input and output which can be used to connect audio devices such as CD players or tape decks.

VARIODYN D1 Call Stations


Approval: VdS

Accessories583306.21 Digital Key Module DKM18583311 Keyboard Cover for VARIODYN D1 DCS Communication Unit583316.21 Fiber Optic Converter Switchboard583317.21 Fiber Optic Converter Communication Unit583315.02 Power Supply for Fiber Optic Converter583307 Wall Jack AB583300.ES Adhesive Label for DCS "ESSER by Honeywell"583318 Replacement Keycaps (packages of 12 pieces)

Technical DataAudio output:Nominal level 0 dBumax. Outputlevel < 6 dBuTransmission range 20 ... 22000 HzHarmonic distortion at nominal level

< 0.1 % @ 1 kHz

Signal/Noise ratio > 85 dBOutput impedance 180 ΩNominal level 0 dBuTransmission range 20 ... 22000 HzHarmonic distortion at nominal level

< 0.1 %

Signal/Noise ratio > 95 dBCommon technical data:Microphone Elektret, cardoid characteristicSwan-neck 300 mmTransmission range 100 ... 15000 HzLoudspeaker 1 WSample rate 48 kHzAD/DA converter 24 BitCurrent consumption < 70 mAAmbient temperature -5 °C ... 55 °CAir humidity 15 % ... 90 % (non-condensing)Color black, similar to RAL 9005 (side frames)

gray, similar to RAL 7037 (middle body)Weight approx. 1.6 kgDimensions W: 123 mm H: 71 mm D: 180 mm

Features

• Cost-saving Cat 5 cabling• Elektret swan-neck microphone with cardioid

characteristic• Permanent monitoring of microphone and the line

to the connected interface module• Broadband loudspeaker for microphone monit-

oring, monitoring of announcements and for intercom operation

• 24-bit AD/DA transformer• Additional audio input/output (DCS15) e.g. for

audio devices such as CD players• Intercom function with other communication units

possible via built-in loudspeaker• 12 freely configurable keys

The digital call stations can be flush mounted onto the surface of a table. A table mounting kit is required for this.A transparent keyboard cover is available in order to provide protection against unintentional keystrokes. This way, pressing keys is only possible with the cover open. Each cover can protect three horizontally arranged keys.

A 3 m long Cat 5 cable for connection of the digital communication unit to a wall jack is included with delivery.

1

17

¬[B#§/32&

¬[B'§/322

583302.21

583306.21

Digital Call Station DCS2

Digital Key Module DKM18

Same as 583301.21 but with one freely configurable key, two LEDs, one microphone and a loudspeaker.

Digital Key Module DKM18 with 18 freely configurable keys and 18 LEDs.Up to 6 of these DKM18 key modules can be connected to one DCS15 and/or DCS2. Thus communication units with up to 120 keys and 120 LEDs are possible.




Approval:

Approval:

VdS

VdS

Technical DataDimensions W: 123 mm H: 71 mm D: 180 mm

Features

• EN 54-16 certified

Features


1

2

3

4

5

6

2


1

1


¬[B$§/32)Fire Control PA Panel

583303.21 Digital Fire Control PA Panel DCSF12

The Digital Fire Control PA Panel DCSF12 allows for the selection of loudspeaker circuits, transmission of voice announcements as well as of various tones and alarms. The commu-nication unit is connected to a free DAL-bus (Digital Audio Link) on the DOMs (Digital Output Modules) via a standard CAT 5 cable. All control signals as well as all audio signals are transmitted digitally. The communication unit has 12 freely configurable keys, 13 LEDs and a manual microphone with a built-in loudspeaker. Up to four digital communication units can be connected to one DOM. Every digital communication unit can simultaneously produce and receive different voice signal through-connections and control signals within the system. A digital communication unit can be relocated by up to 300 m via a Cat 5 cable (expansion up to 2,000 m possible using fiber optic cabling) and can be expanded with up to six DKM18 digital key modules; this increases the total number of available keys and LEDs to 120 per communication unit.

The inaudible monitoring frequencies sent by the loudspeaker are continuously picked up by the microphone. Any interruption will lead to an error message.



Approval: VdS

Accessories583306.21 Digital Key Module DKM18583311 Keyboard Cover for VARIODYN D1 DCS Communication Unit583312 Installation Kit for Communication Unit DCS onto table VARIODYN D1, 19 inch583316.21 Fiber Optics Conversion for OIM Control Unit VARIODYN D1583317.21 Fiber Optics for Digital Communication Units DCS VARIODYN D1583315.02 Power Supply for Fiber Optics Converter DCS O VARIODYN D1583307 Wall Jack for VARIODYN D1 DCS Communication Unit583300.ES Adhesive Label for DCS "ESSER by Honeywell"583318 Replacement Keycaps (package of 12 pieces)584961 Housing for one FW - Callstation DCSF584962 Housing for two FW - Callstations DCSF

Technical DataMicrophone Elektret, cardoid characteristicTransmission range 200 ... 12500 HzLoudspeaker 1 WSample rate 48 kHzAD/DA converter 24 BitCurrent consumption < 150 mAAmbient temperature -5 °C ... 55 °CAir humidity 15 % ... 90 %Color black, similar to RAL 9005 (side frames)

grey, similar to RAL 7037 (middle body)Weight approx. 1.6 kgDimensions W: 134 mm H: 40 mm D: 196 mm

Features

• Manual microphone with built-in loudspeaker and acoustic microphone monitoring

• Permanent monitoring of the line to the following interface module

• 24-bit AD/DA converter• 12 freely configurable keys

A transparent keyboard cover is available in order to provide protection against unintentional keystrokes. This way, pressing keys is only possible with the cover open. Each cover can protect three horizontally arranged keys.


1

116

40

174

196

134

1

19

¬[B%§/32,

¬[B&§/32/

583304.21

583305.21

Digital Fire Control PA Panel DCSF1

Fire Control PA Panel DCSF 7

Same as 583303.21 but with one freely configurable key, two LEDs and a manual micro-phone with built-in loudspeaker.

The digital fire brigade call station DCSF7 serves to dial and start pre-configured alarm text messages and to broadcast freely spoken voice announcements by the fire brigade.One fire brigade call station (FWS) needs to be installed mandatorily as per ÖNORM F 3033 with all electro-acoustic emergency systems (ENS) as per TRVB S 158 in Austria.The digital fire brigade call station DCSF7 is used along with ENS VARIODYN D1 and contains the hand-held microphone with talk button, operation/display elements and an in- built loudspeaker for acoustic microphone monitoring and the acoustic error message to be broadcast.DCSF7 is connected to VARIODYN D1 via a free DAL bus of the Digital Output Module (DOM) using a standard Cat5 cable. Both the transfer of all audio and control signals and the power supply of the call station is ensured via the DAL bus and permanently moni-tored.Any number of DCSF7 digital fire brigade call stations can be operated with the VARI-ODYN D1. Thus, in case of evacuation, optimized evacuation of the building is guaran teed, even from different places. These transfers are subject to the necessary priorities and inter-locking in ÖNORM F 3033 and TRVB S 158.The product is authorized with the designation "fire brigade call station DCSF7 as per ÖNORM F 3033 2005" This approval is certified by a test certificate.A DCSF7 can be broadcast with a Cat5 cable up to 300 m from an ENZ. The distance to the ENZ can be increased to 2,000 m by using optimum fiber-optic cabling.




Approval:

Approval:

VdS

VdS

Accessories583709 Dummy Plate

Accessories583316.21 Fiber Optic Converter Switchboard583317.21 Fiber Optic Converter Communication Unit583300.ES Adhesive Label for DCS "ESSER by Honeywell"583318 Replacement Keycaps (package of 12 pieces)

Technical DataOperating voltage 24 V DCMicrophone Manual microphone, cardoid characteristic,

Push-To-Talk (PTT) buttonTransmission range 200 ... 12500 HzLoudspeaker 1 WSample rate 48 kHzAD/DA converter 24 BitCurrent consumption < 150 mAAmbient temperature -5 °C ... 55 °CAir humidity 15 % ... 90 %Color red, similar to RAL 3000 (housing)

white, similar to RAL 9002 (key pad)Weight approx. 2 kgDimensions W: 200 mm H: 300 mm D: 55 mm

Features


Features

• Permitted as per EN 54-16• Five freely-programmable buttons for alarms• One freely configurable button for the all-clear

signal• One button for resetting/acoustics• Three integrated LED display elements (Operation,

Fault, Occupied)• Hand-held microphone with cardioid character-

istics and PTT talk button• Optional fiber optic connection for distances of up

to 2000 m• Display window and seal as per EN 54-11• Corresponds to and is tested positively by the test

center for fire protection technology PSBT as per ÖNORM F 3033 Test number: FT 14/830/03/08 – sl. no. 442.03

• Optimally tailored to the requirements of the fire brigade

• Lockable metal body

1

2

3

4

5

6

2


1

1

1


¬[R]>

¬[R^A

584960

584961

FIOS Mounting Kit for Fire Department Digital Call Station DCSF 1/ 12

Housing for one Fire Department Digital Call Station DCSF

For mounting the digital call stations DCSF1 and DCSF12 into the fire information and operating system FIOS.

Wall housing made of sheet steel for installation of one DCSF12 or DCSF1 fire department digital call unit in the original housing.


Technical DataColor blackDimensions W: 240 mm H: 170 mm D: 47 mm

Technical DataType of protection IP30Color red, similar to RAL 3000Weight approx. 4.8 kgDimensions W: 350 mm H: 265 mm D: 100 mm

Features

• Powder-coated in red, similar to RAL 3000• Door with 180 x 120 mm viewing window with

acrylic glass cover• Prepared for installation of the fire department

lock• Internal mounting plate for installation of the

digital call station• 2 cable entries on the housing rear wall• 2 cable entries each on the top and bottom of the

housing• One mounting bracket for fiber-optic cable

converter 583317.21 in the housing

Housing including additions with 4 screws for installation of the digital call station.

1

1

21

¬[R_D584962 Housing for two Fire Department Digital Call Stations DCSF

Wall housing made of sheet steel for installation of two DCSF12 or DCSF1 fire department digital call units in the original housing.


Technical DataType of protection IP30Color red, similar to RAL 3000Weight approx. 8.4 kgDimensions W: 350 mm H: 500 mm D: 100 mm

Features

• Powder-coated in red, similar to RAL 3000• Door with two 180 x 120 mm viewing windows

with acrylic glass cover• Prepared for installation of the fire department

lock• 2 internal mounting plates for installation of the

digital call stations• 4 cable entries on the housing rear wall• 2 cable entries each on the top and bottom of the

housing• Two mounting brackets for fiber-optic cable

converter 583317.21 in the housing• Option for installing one DCSF and one DKM18

digital call station using mounting kit 583312

1

2

3

4

5

6

2

Housing including additions with 8 screws for installation of the digital call stations.

1


The DIGISystem M is a universal digital call station system for loudspeaker systems. Up to 40 call stations can be connected in parallel, while using just one AF input. Different processor-controlled functions can be assigned to the buttons, depending on the type. The user can easily adapt them to the system in question by removing several diodes or jumpers. The central control unit for the public address system does not need a receiver. The AF output should run to a UIM line input and the switching outputs to UIM contact inputs. Control line 9 is designed to trigger this function with minimum delay in order to prevent mechanical interference noise when the buttons are pressed.The digital call stations are suitable for use in department stores, courthouses, furniture stores, DIY stores, etc.

These digital call stations are NOT approved for safety-relevant announcements, e.g. fire alarms and evacuation.

¬[^#v

¬[^$y

¬[^%|

586102

586103

586104

Table Call Station with DIGIM1 Pregong System

Table Call Station with DIGIM4 Pregong System

Flush-mounted Box for DIGI System Table Call Station DIGIST09

Table call station with DIGI M1 pregong system in an attractive housing. One labelable button with LED indicator for button monitoring and occupied/operating/gong display. Processor control with programming via diodes. Integrated limiter and special circuit for elimination of switch-on noise. Integral +6 dB AF amplifier with volume control.Distinctive, short pregong with controls for volume and pitch. Parallel connection of up to 40 digital call stations via line JY(ST)Y6(4)x2x0.8(0.6). 3-meter connection cable with 9- pin D-Sub connector. Cardioid gooseneck microphone in electret capacitor technology.

Table call station with DIGI M4 pregong system in an attractive housing. Four labelable buttons with LED indicator for button monitoring and occupied/operating/gong display. Processor control with programming via diodes. Integrated limiter and special circuit for elimination of switch-on noise. Integral +6 dB AF amplifier with volume control.Distinctive, short pregong with controls for volume and pitch.Parallel connection of up to 40 digital call stations via line JY(ST)Y6(4)x2x0.8(0.6). 3- meter connection cable with 9-pin D-Sub connector. Cardioid gooseneck microphone in electret capacitor technology.

Flush-mounted box for DIGI system table call stations with lockable 9-pin D-Sub socket including EMI/RFI filter. Quick connection via screw terminals. The socket outlet is option-ally available as vertical or inclined at 30°. Complete with single frame suitable for GIRA System 55 switch range, pure white. On-wall mounting also possible using surface–mou nted housing (Part No.: 581329).


Call Station for Non-Safety-Relevant Applications

Technical DataOperating voltage 24 V DCCurrent consumption @ 24 V DC approx. 24 mAHousing ABS light grayDimensions L: 250 mm W: 125 mm H: 30 mm D: 150 mm

Technical DataOperating voltage 24 V DCCurrent consumption @ 24 V DC approx. 30 mAHousing ABS light grayDimensions L: 250 mm W: 125 mm H: 30 mm D: 150 mm

1

1

1

23

¬[B1§/32P

¬[B2§/32S

¬[B0§/13H

Accessories for Call Stations

583316.21

583317.21

583315.02

Fiber Optic Conversion for Control Unit

Fiber Optic Conversion for Digital Communication Units DCS

Power Supply for Fiber Optics Converter

Is connected in the control unit per Communication Unit DCS and/or UIM (only VARI-ODYN D1) via Cat 5 cable (max. 10 m length). This facilitates a range of up to 2,000 m. A range of up to 300 m is possible using Cat 5. The converter is supplied with power via the DAL Bus.

Is connected to the Digital Communication Unit DCS and/or UIM via Cat 5 cable (max. 10 m length). This facilitates a range of up to 2,000 m. A range of up to 300 m is possible using Cat 5. For security-relevant installations, the voltage supply has to be provided via the voice alarm system‘s 24 V DC emergency power supply.

Power supply for Fiber Optics converters 583316.21 or 583317.21.




Approval:

Approval:

VdS

VdS

VA/PASpeaker loop

DOM

Loop isolator module Loop isolator module

Loop isolator module

Accessories583315.02 Power Supply for Fiber Optics Converter

Technical DataWavelength 1308 nmRange < 2000 mFO-Connector Duplex SCDimensions W: 115 mm H: 55 mm D: 25 mm

Technical DataOperating voltage 24 V DCCurrent consumption @ 24 V DC approx. 500 mAWavelength 1308 nmRange < 2000 mFO-Connector Duplex SCDimensions W: 115 mm H: 55 mm D: 25 mm

Features


Features


1

2

3

4

5

6

2

1

1

1


¬[B!§/FTK

¬[B(M

¬[B,Y

¬[B-\

¬[B3n

583300.ES

583307

583311

583312

583318

Adhesive Label for DCS "ESSER by Honeywell"

Wall Jack for Communication Unit DCS

Keyboard Cover for VARIODYN D1 DCS Communication Unit

Installation Kit for Communication Unit DCS

Key Cap

Label for the Stations of the DCS series and DCSF with the inscription "ESSER by Honey-well."

Wall jack for connection of a DCS or DCSF series communication unit.

A transparent keyboard cover is available in order to provide protection against uninten-tional keystrokes. This way, pressing keys is only possible with the cover open. Each cover can protect three horizontally arranged keys of a digital communication unit or a digital key module.

Installation kit for DCS15, DCS2 or DKM18.

Transparent keyboard covers for DCS, DCSF and DKM call stations.


Accessories583709 Dummy plate 4 HE


10 pieces

12 pieces

1

1

1

1

1

25

¬[Bh§/32' 583371.21 Mains Switching Unit (MSU)

The Mains Switching Unit MSU serves to protect the power supply of all VARIODYN D1 components which are built into a switchboard. It also provides a plug to connect a service PC for local and network-wide servicing purposes.

Each of the up to three phases can be loaded with max. 18 A. The excess current switch automatically releases the excess current but can also be used to manually switch the voltage supply.

The operating conditions are indicated by green operating lights. The switch setting can be evaluated via auxiliary contacts.A frontal 230 V low power socket and an RJ45 socket are available for service PC connection.

VARIODYN D1 Mains Switching Unit (MSU)


Approval: VdS

Accessories583703 Mounting Kit 1

MAIN

Sm

ax.

3 x 18

A

CONT

ACTS

ETHERNET

max. 250V / 4A AUX L1 AUX L2 AUX L3

L1 L2 L3 N PE F1/L1 F1/N F1/PE F2/L2 F2/N F2/PE F3/L3 F3/N F3/PE

0 1 0 1 0 1

MSU

VAR

IOD

YN D

1F1 F2 F3POWER / F1ETHERNET

0 1 0 1 0 1

F1 F2 F3

Ethernetprogramming port

Ethernetconnection to the DOM

230 V-primary low receptacle,for example, service PC power supply

Phase 1 18 A Phase 2 18 A Phase 3 18 A

MSU rear view and front view

Technical DataThermal Protection:Rated current 18 AOperating life 10.000 cyclesShutdown 1-poleAuxiliary Contacts:Type Changeover contactContact load AC 250 V, max. 4 AContact load DC 24 V, max 4 ACommon technical data:Ambient temperature -5 °C ... 55 °CAir humidity 15 % ... 90 %Weight approx. 4.2 kgDimensions W: 483 mm H: 44 mm D: 345 mm (1 HE, 19")

Features

• Three 18 A excess current switches with control contacts and control indicator light

• Low power connection and Ethernet connection to connect a service PC for maintenance purposes

• Three connections for auxiliary changeover contact per excess current switch

• Up to four devices can be connected to each excess current switch

1

2

3

4

5

6

211


¬[Br§/33L 583381.22 System Communication Unit (SCU)

The System Communication Unit SCU serves as digital audio memory for the VARIODYN D1 public address system. It is possible to record and playback multiple audio data streams simultaneously.

Connected to other VARIODYN D1 modules via Ethernet and is constantly monitored. Audio memory (the availability of which is critical) for alarms and evacuation announce-ments occurs according to IEC EN 60849 on non-volatile flash-memory. Memory capacity is approx. two hours.

Other audio files such as announcements, signals or advertisements are pre-stored on a hard drive. The memory capacity is approx. 1000 hours.

The SCU can also be used to log and record announcements. These are also saved on the hard drive and are backed up with date, time and activation details. The automatic temporary storage allows previously undeliverable announcements to be played once the desired target is free.

Connections• Ethernet connection 100 Mbit/s• Power connection• 24 V DC emergency power input

Indicators• POWER LED, HARD DISK LED• ERROR LED, STAND-ALONE LED

VARIODYN D1 System Communication Unit (SCU)


Approval: VdS

Accessories583486 Cat 5 Patch Cable, 1 m yellow (ETH)583487 Cat 5 Patch Cable, 2 m yellow (ETH)583488 Cat 5 Patch Cable, 3 m yellow (ETH)583703 Mounting Kit 1

Technical DataEmergency power supply:Current consumption 1.33 ARated voltage 24 V DCPower consumption 32 WCommon technical data:Rated voltage 90 ... 265 V ACRated frequency 47 ... 63 HzRated current 0.5 A @ 230 V ACFlash memory approx. 2 hHard drive capacity approx. 1000 hAmbient temperature -5 °C ... 55 °CAir humidity 15 % ... 90 %Color grey, similar to RAL 7016Weight approx. 3 kgDimensions W: 483 mm H: 44 mm D: 360 mm (1 HU, 19")

Features

• Digital audio memory for VARIODYN D1 alarm and evacuation system

• Networkable via Ethernet• Audio memory in compliance with all alarm and

evacuation standards• Can be used to log and record announcements

Automatic temporary storage and playback of interrupted messages

• 24 V DC emergency power supply

1

27

¬[B@§/32 583331.21 Universal Interface Module (UIM)

The Universal Interface Module UIM serves as an interface module of the VARIODYN D1 public address systems, connecting two analog audio inputs, two analog audio outputs as well as 48 control contacts. Monitoring for short circuiting and interruptions can be activ-ated for eight control contacts.The UIM can be connected to the VARIODYN D1 DOM module via the DAL databus.

The UIM digitalizes two analog audio inputs, from for example a CD player, security system, etc., and transfers the digitalized audio data to the VARIODYN D1 DOM module via the DAL databus. Two outputs are available as analog audio sources in order for example to forward all played messages to an external device. The 48 contacts can be configured as either contact inputs or outputs. Thus the public address system can be controlled extern-ally and information regarding the status of the public address system can be made avail-able.

VARIODYN D1 Universal Interface Module (UIM)


Approval: VdS

Accessories583401.21 Control Cable 12 for UIM583481 Patch Cables Cat 5, 1 m blue (DAL)583482 Patch Cables Cat 5, 2 m blue (DAL)583483 Patch Cables Cat 5, 3 m blue (DAL)583703 Mounting Kit 1

UIM

VARI

ODY

N D1

Signal POWERERROR

48 control contacts 2 x audio OUT 2 x audio IN DAL bus

UIM rear view and front view

Technical DataAudio output:Nominal level 0 dBuTransmission range 20 ... 22000 HzHarmonic distortion at nominal level

< 0.05 %

Output impedance 200 Ω / 200 Ω (XLR / Cinch, potential free)Audioinput:Nominal level 0 dBuTransmission range 20 ... 22000 HzHarmonic distortion at nominal level

< 0.05 %

Load impedance 100 kΩ / 1 kΩ (XLR / Cinch, potentialfrei)Common technical data:Current consumption @ 24 V DC < 150 mAInputs max. 36 V DCOutputs 36 V DC / 50 mAAmbient temperature -5 °C ... 55 °CAir humidity 15 % ... 90 %Weight approx. 3.6 kgDimensions W: 483 mm H: 44 mm D: 345 mm (1 HE, 19")

Features

• Conforms to IEC 60849/VDE 0828• Two analog floating audio inputs/outputs• 48 contacts as inputs and/or outputs, freely

programmable• Digital Audio Link (DAL) to DOM• Connection of diverse disciplines possible via UIM

1

2

3

4

5

6

211


¬[BTj

¬[BA1

583351

583332

View Control Module (VCM)

Overvoltage Protection Module for UIM Contacts

The VCM module (View Control Module) was added to the VARIODYN D1 system in accordance with the requirements for EN 54-16 approval. It enables the standardized display of collective messages and has a 5-button operator control panel. At least one VCM is required for EN 54-16 systems.

If several upright cabinets are set up directly side-by-side in a room and form a single system, one VCM module per room is sufficient. Remotely positioned cabinets require a separate VCM module each. The VCM module is connected directly to a UIM and 24 V DC.

The max. 3 DOMs in the cabinet in which the VCM module is located are also connected to three separate VCM module inputs. All other DOMs are linked via Ethernet. The VCM module can be programmed easily and conveniently using a macro in the “Designer” programming software.

The UIM has 48 contact inputs and outputs. These inputs and outputs are divided into 4 blocks with 12 inputs/outputs on each block.On EN 54-16-compliant systems, the overvoltage protection module 583332 must be used for connecting wires going to external contacts that are longer than 3 m. The overvoltage protection module provides protection for 12 inputs and outputs (i.e. 1 block). It is used instead of signal cable 12 (Part No. 583401.21). It is supplied with its own connection cable.

VARIODYN D1 View Control Module (VCM)



Approval:

Approval:

VdS

VdS

Technical DataCurrent consumption @ 24 V DC approx. 10 mA

1

1

29

¬[BJ§/324

¬[-*)

¬[%#k

583341.21

581237

580402

Contact Interface Module (CIM)

Tuner / CD / MP3 Player MP02

5-Disc CD Changer DN-C200P

The Contact Interface Module (CIM) is used as a VARIODYN D1 system interface for the connection of 8 control contacts. These 8 control contacts can be configured either as inputs or outputs. When used as inputs, four of the eight contacts can be programmed to monitor lines. A 3 m long Cat 5 cable for connecting CIM to the TWI-input of the DOM is included with delivery.

The tuner / CD / MP3 Player combination MP02 also includes a Flashdisk reading device. The player can also be operated using the supplied remote control. The 2 audio outputs facilitate the simultaneous playback of both sources.

The DN-C200P is a five disc carousel model with CD and CDR, MP3 and WMA compatib-ility, infra red control and random, program and repeat playback modes. Offering improved reliability over cartridge systems, the DN-C200P is ideal for long-term installation into retail and leisure environments. A 19”/3HU Rack mount kit is supplied.

VARIODYN D1 Additional Components / Audio Devices


Approval: VdS

Technical DataInputs max. 36 VOutputs 36 V DC / 50 mAAmbient temperature -5 °C ... 55 °CAir humidity 15 % ... 90 %Weight approx. 310 gDimensions W: 105 mm H: 40 mm D: 105 mm

Technical DataFrequency range 87.5 ... 108 MHzSignal-to-noise ratio > 60 dBHarmonic distortion at the nominal level

< 0.8 %

Channel separation > 30 dBTransmission range 100 ... 10000 HzOutput voltage 1.2 V DC ± 2 dBTransmission range 20 ... 20000 HzHarmonic distortion at nominal level

< 0.1 %

Common technical data:Rated voltage 230 V ACPower consumption 50 WInputs FM 75 Ω, USB-Port, SD-PortOutputs 1 x CinchWeight approx. 3.5 kgDimensions W: 482 mm H: 44 mm D: 250 mm (1 HE)

Technical DataHarmonic distortion at the nominal level

< 0 %

Channel separation > 98 dBRated voltage 230 V ACPower consumption 15 WWeight approx. 6.3 kgDimensions W: 434 mm H: 120 mm D: 400 mm

Features

• Input and output contacts freely programmable / 4 can be monitored

• Cat 5 cabling to DOM• Mounting via DIN rails possible• Connection of different disciplines via CIM

possible

Features

• Usable media sizes: 12cm and 8cm Audio Compact Discs

1

2

3

4

5

6

21

1

1


¬[-N.

¬[.UE

¬[.VH

¬[.WK

581245

581352

581353

581354

Power Amplifier 4x120 W / 100 V

MMA 240 Mixing Amplifier

FM / AM / USB / SD Player

FM / AM / CD Player

Four channel installation amplifier with 120 W rated power per channel. A4 x 120 is reliable and can work under hard conditions. Balanced inputs via Phoenix connectors, gain control, LED indicators and variable speed fan cooling system, 24 V DC power supply.Optimized for public address but with adapted system cables also full with all functions of VARIODYN D1 compatible!

Five zone mixing amplifier with 240W rated output power. The device is designed for back-ground music and public address broadcast for up to five different zones. One slot for interchangeable music source modules, 6 Mic/Line inputs, gain control, paging micro-phone input, chime function, phantom power, priority inputs, graphic equalizer, five zone selector.

FM/AM/USB/SD radio tuner and player, designed to play compressed audio files. Volume control, equalizer, mute function, input source selection, repeat, random functions.For MMA 240 Mixing amplifier (581352) only!

FM/AM/CD radio tuner and CD player supporting compressed audio files and CD-R, CD- RW disc formats. For MMA 5-zone amplifiers only.



< 1 %

Channel separation > 86 dBRated voltage 230 V ACPower consumption 1280 WWeight approx. 23.8 kgDimensions W: 132 mm H: 425 mm D: 445 mm


< 0.5 %

Channel separation > 90 dBTransmission range 50 ... 15000 HzRated voltage 230 V ACPower consumption 280 WWeight approx. 9.7 kgDimensions W: 420 mm H: 88 mm D: 320 mm

Technical DataOperating voltage 12 V DCCurrent consumption 0.5 AHarmonic distortion at the nominal level

< 0.1 %

Channel separation > 70 dBTransmission range 87.5 ... 108 Hz

Technical DataFrequency range 87.5 ... 108 MHzChannel separation > 60 dBTransmission range 20 ... 20000 Hz

1

1

1

1

31

¬[.XN

¬[.YQ

¬[.ZT

581355

581356

581357

TALK ST Table Stand

TALK C1 Condenser Microphone

TALK D Dynamic Microphone

Microphone stands for XLR gooseneck microphones (TALK C1 or TALK D) with on/off switch.Connector:Microphone input: 3-pin female XLRCable:3-pin male XLRCharacteristics:Plug-in metal desk stand with on/off switch for microphones with XLRM connectors

Condenser gooseneck microphone with a built-in phantom power adapter. It can be used with TALK ST stands for fixed installation as desktop microphone. XLR connector is integ-rated into the metal body. Supplied with windscreen.

Dynamic gooseneck microphone with robust body and steel grill capsule basket. Designed for paging purposes. It can be used with TALK ST stands for fixed installation as desktop microphone. XLR connector is integrated into the metal body. Supplied with windscreen.


Technical DataColor blackWeight approx. 0.9 kgDimensions W: 45 mm H: 110 mm D: 140 mm

Technical DataTransmission range 50 ... 18000 HzColor blackWeight approx. 115 gDimensions L: 456 mm

Technical DataTransmission range 150 ... 12000 HzColor blackWeight approx. 176 gDimensions L: 425 mm

1

2

3

4

5

6

2

Zum Anschluss an den MMA 240 Mischverstärker (581352) muss entweder ein XLR-Kabel, 1 m (583489) oder ein XLR-Kabel, 10 m (583490) bestellt werden!

1

1

1


¬[25§/WEd

¬[26W

581720.VD

581721

Emergency Power Supply 24 V / 100 A

Emergency Power Supply 24 V / 150 A

Emergency power manager for emergency power supply of ENS (Electro-acoustic Emer-gency Warning Systems) / VAS (Voice Alarm Systems) / VA (Voice Alarm) applications in compliance with the TRVB 158 S and/or VDE 0833-4 and EN 60849. This emergency power manager is approved according to EN 54-4/A2. (VARIODYN D1 Design)

Emergency power manager for emergency power supply of ENS (Electro-acoustic Emer-gency Warning Systems) / VAS (Voice Alarm Systems) / VA (Voice Alarm) applications in compliance with the TRVB 158 S and/or VDE 0833-4 and EN 60849. This emergency power manager is approved according to EN 54-4/A2. (VARIODYN D1 Design)

VARIODYN D1 Power Supply

We have updated our system design and emergency power supplies to the current state of standardization in this new edition of our “Voice Alarm Systems” catalog. The following emergency power supply is certified in compliance with the EN 54-4 (A2) standard which is stipulated as of August 2009 for voice alarm system emergency power supplies. Battery capacities and the number devices for the operation of a voice alarm system depend on the required delay time, the required performance, and the alarm time, among other things. To help you both easily and efficiently guarantee optimal distribution of the emergency power supply, our “VARIODYN D1 emergency power supply calculation tool” is ready for you to download in the service area of our website.

Approval: EN 54-4/A2Part of EN 54-16 approval 0786-CPD-20997

Accessories581730 Battery for Emergency Power Supply 12 V / 105 Ah581730 Battery for Emergency Power Supply 12 V / 150 Ah

Accessories581730 Battery for Emergency Power Supply 12 V / 105 Ah581730 Battery for Emergency Power Supply 12 V / 150 Ah

Technical DataRated voltage 230 V ACRated frequency 50 ... 60 HzOutput voltage 24 V DCOutput current max.100 AAmbient temperature -5 °C ... 45 °C (at 100 % load)Storage temperature -25 °C ... 85 °CWeight approx. 10 kgCE certificate 0333-CPD-075243Dimensions W: 483 mm H: 133 mm D: 395 mm (3 HE, 19")

Technical DataRated voltage 230 V ACRated frequency 50 ... 60 HzOutput voltage 24 V DCOutput current max.150 AAmbient temperature -5 °C ... 45 °C (at 100 % load)Storage temperature -25 °C ... 85 °CWeight approx. 6 kgCE certificate 0333-CPD-075381Dimensions W: 483 mm H: 88 mm D: 395 mm (2 HE, 19")

Features

• Permanent monitoring of fuses• Monitoring of the battery charging current• Monitoring of the battery charge status• LED indicators for power supply, battery, output• Temperature sensor• Floating contacts for power supply, battery, output

Features

• Emergency power supply in the 2 HE body• 3 individually secured exits for control devices

(DOM)• 6 individually secured high-performance outputs

for power amplifiers• Authorization as per EN 54-4 (A2)• LED displays for network, battery, users• Potential-free contacts for transmissions of fault

messages• Battery capacity up to 2 x 12 V/225 Ah• Maximum output current in case of power failure

150 A

2 accumulators of the same type are required per emergency power supply

Entry requested in EN 54-16 and VdS authorization of the VARIODYN D1.

Available for Q2 / 2012

1

1

33

¬qw8/

¬[2?r

805683

581730

External Power Supply DCU 2403

Battery for Emergency Power Supply 12 V / 105 Ah

External power supply in a compact metal housing for up to two 12 V/ 24 Ah batteries. This power supply facilitates an uninterruptable supply of power. Integration into the esserbus/ esserbus-PLus optional via optional adapter card (Part No. 805684) and esserbus Trans-ponder (Part No. 808613.10).

Four floating relay outputs are available for the transmission of disturbances (power failure, ground fault, battery failure and collective fault). External LED display for operation and collective fault on the lockable front door, internal LEDs for detailed recognition of emergency power operation, individual monitoring of battery failure and ground fault.

Emergency battery (AGM) for usage in emergency power supply of ENS/VAS/VA applica-tions.


Approval: VdS, EN54-4

Accessories808613.10 esserbus transponder 4 IN / 2 OUT

Technical DataRated voltage 230 V ACRated frequency 50 ... 60 HzOutput voltage 12 V DC oder 24 V DC; ± 1 % (temperature controlled)Output current 6 A @ 12 V DC / 3 A @ 24 V DCBattery capacity max. 48 Ah @ 12 V DC / max. 24 Ah @ 24 V DCContact load relay max. 125 V / 1,5 A / 60 VAAmbient temperature -5 °C ... 40 °CStorage temperature -20 °C ... 45 °CType of protection IP30Housing sheet steelColor gray, similar to RAL 7035Weight approx. 23 kg incl. batteries each 12 V DC / 24 AhCE certificate 0786-CPD-20935Dimensions W: 310 mm H: 410 mm D: 211 mm

Technical DataWeight approx. 32.5 kgDimensions W: 502 mm H: 111 mm D: 236 mm

Features

• Reversible output voltage 12 V DC or 24 V DC• Output current 6 A at 12 V DC or 3 A 24 V DC• Simple integration into esserbus/ esserbus-PLus• Internal service LED displays• Four floating relay outputs• Monitoring of mains voltage with selectable delay

time• Individual battery monitoring for emergency

power operation• Disengagable ground fault monitoring• Front door with cover contact

Features

• Optimized for usage in 19" cabinets• Front terminal

1

2

3

4

5

6

2

Batteries used in the power supply must be tested and VdS approved. Batteries of the same age from the same manufacturer coming from the same production batch must be used when connecting batteries in parallel. Furthermore, regulations as per DIN VDE 0833-1 have to be adhered to.

Ready-made cables for connecting 12 V/ 24 Ah SB batteriesHousing lock with keyAccessory pack (contains: dummy cover, insert jumper for device fuses, jumper for adjusting output voltage)

1

1


¬[2@u

¬"q'o

581731

018006

Battery for Emergency Power Supply 12 V / 150 Ah

Battery 12 V DC / 24 Ah

Emergency battery (AGM) for usage in emergency power supply of ENS/VAS/VA applica-tions.


Technical DataWeight approx. 49.5 kgDimensions W: 552 mm H: 110 mm D: 288 mm

Features

• Optimized for usage in 19" cabinets• Front terminal

2 x Fast-On Adapters from M6 to 6.3 mm each 2 x M5 hexagon head cap screws, washers and snap rings.

1

35

¬[.1@

¬[.5L

¬[.>g

¬[C£%

581316

581320

581329

583496

Microphone P4 for AVR

Flush-Mounted XLR Panel Jack

Surface-Mounted Box

End-of-Line Module

Microphone for usage of the AVR (Automatic Volume Regulation) functionality of the DOM. The microphone is installed in the area concerned and connected to the corresponding DOM input via the XLR terminal box (Part No. 581320).

Flush-mounted box with 3-pin / GIRA System 55 XLR panel jack.

Surface-mounted box for Part Nos. 581320 to 581323 / GIRA System 55

End-of -ine module for terminating VARIODYN D1 voice alarm system loudspeaker lines for standardized monitoring if more than 20 loudspeakers are connected per line. The module is connected at the line end, following the last loudspeaker.

Independent of number and performance of connected loudspeakers.

VARIODYN D1 Accessories


Approval: VdS

Accessories581329 Surface-Mounted Box

Technical DataTransmission range 20 ... 16000 HzSensitivity 2.5 mVSound level max. 157 dBImpedance 2000 ΩWeight approx. 400 g

Technical DataColor pure white / silk-mat


Features

• Standardized monitoring• Terminating device for 100 V loudspeaker line

using 2-wire technology• Different connection options for optimal line adap-

tation (3 connections)• The module is sealed and thus has optimal mois-

ture protection

1

2

3

4

5

6

2

Delivery time on request

1

1

1

1


¬[Bw§/32T

¬[Bx§/32W

¬[Bx

583386.21

583387.21

583390

TWI - RS 232 Adapter

Time Control Module GPS (TCM GPS)

Master Clock SC 98.47 pro

The TWI-RS232 Adapter is used for the conversion of the TWI buses to RS232. Used for specific maintenance purposes and connection of an external system (e.g. ESSER IQ8 Co ntrol).The TWI-RS232 Adapter is connected either directly to the DOM or via the supplied Cat 5 cable (depending on the hardware).

This module is meant for the time synchronization of a VARIODYN D1 alarm/evacuation system via GPS (Global Positioning System). The exact time is then transmitted to all other networked DOMs via one DOM which is time-synchronized with the TCM GPS. This facili-tates precisely timed, automated announcements (e.g. the recess bell in schools) timed volume adjustment (e.g. night-mode in railway stations) or simply just precisely-timed documentation of announcements or trouble alarms.

ConnectionThe module is either connected directly to the I2C interface via a standard CAT5 cable (max. 10m) or connected to the 9pin Sub-D jack of a DOM with the included adapter cable.

MonitoringBoth disconnections of the module as well as of the satellite reception is recorded.

Master clock for timer control in the VARIODYN D1 system. The master clock is connected to the VARIODYN System via a UIM (Part No. 583331.21). A DCF77 time synchronization of the master clock can be carried out using the Wireless Receiver (Part No. 583391).

Switching Control / Signal Clock• 4 switching and/or signal circuits• Day, week and year settings• 300 units of memory• Switching functions, ON, OFF, or Pulse• Shortest switching distance of 1 minute (and/or 1 sec. with pulse)• Switching capacity of 10 A per channel• Manual switching override• Adjustable switching times• Block formation of weekdays and switching functions• Programmable without mains connection (via keyboard or with data key)• PC programmable option




Approval:

Approval:

VdS

VdS


Features


Features

• Module for time synchronization of the entire VARIODYN D1 system

• Connection to an arbitrary DOM in the system is possible

• Time synchronization via GPS signal• Connection to the system via prefabricated cable

(included)

Features

• For approx. 40 slave clocks (24 V DC, 300 mA, pole changing)

• Slave clock line protected against short-circuiting• Automatic setting of slave clocks• Slave clock line follow-up device with voltage

recovery (automatic setting of slave clock time)• Fully automatic daylight saving time change with

60 additional pulses and/or pulse suppression• Monitoring of slave clock line and error indication

in display• PIN encryption security• Illuminated display• “Data key” function “DCF” function

Prefabricated cable included.

1

1

1

1

37

¬[B|

¬[B~

583391

583392

Wireless Receiver FU 20.00 pro

FO Switch for Ethernet Ring, multimode

DCF77 Wireless Receiver for connection to the Master Clock (Part No. 583390). Up to 10 master clocks can be connected in parallel.

The DCF77 signal is sent from Mainflingen (near Frankfurt on the Main). Under normal conditions, the signal range of the FU 20.00 pro receiver is approx. 1500 kilometers.

The fiber optic switch is used for the creation of an Ethernet network in loop design. Due to the loop structure the network is fully redundant since the other side of the loop can be used for communication in the case of a fiber optic fiber break. Furthermore each switch is equipped with two operating voltage inputs (24 V DC) and a relay for the forwarding of fault messages. Suitable for multimode fibers 50/125 µm and 62.5 / 125 µm.



Approval: VdS

*In the case of a fiber break the system functionality is preserved and a fault is reported.

Optical Fiber LAN

Guaranteed data transfer also in the case of wire breakage*

Intact networkFaulty data transmission

Technical DataOperating voltage 12 ... 48 V DCPower consumption 6 WData transmission speed 14880 / 148800 bps (Ethernet / Fast Ethernet)Transmission distance max. 2 km (LWL)Ambient temperature 0 °C ... 60 °CType of protection IP30Dimensions W: 54 mm H: 135 mm D: 105 mm

Features

• Reception of the DCF77 telegram• Time and date are automatically fed into the timer

switches• Daylight savings time adaptation via the DCF tele-

gram• Control light flashes when receiving• Easy mounting, case is rotatable in the mounting

bracket• Feed line: 2-wire, no shielding, selectable cross-

section• Max. line length of 200 m between FU 20.00 pro

and SC 98.47 pro

Features

• Authorization EN 54-16• 6 Ethernet connections• One relay for the forwarding of fault messages

contact load 24 V DC / 1 A• 2 duplex SC FO connections

Standards• IEEE 802.3 10Base-T• IEEE 802.3u 100Base-TX/FX• IEEE 802.1p Priority Support• IEEE 802.1d Spanning Tree Protocol• IEEE 802.1w Rapid Spanning Tree• IEEE 802.1q VLAN Tagging

1

2

3

4

5

6

21

1


¬[B~£

¬[^06

583393

586115

FO Switch for Ethernet Ring, single mode

Doormaster Smart PAL Telephone Interface

Entry requested in EN 54-16 and VdS authorization of the voice alarm system VARI-ODYN D1.

The Doormaster Smart PAL telephone interface is used for recording announcements via an analog telephone system into the VARIODYN D1 voice alarm system. Up to 4 different call circuits or areas can be addressed via the telephone system. For this purpose, 1 + 4 control contacts are available for switching on and/or area selection.The telephone interface is connected to VARIODYN D1 via control inputs and an audio input of UIM 583331.21. The 12-V operating voltage can be generated from the 24-V emer-gency power supply with the voltage converter 781336 available in the voice alarm system. The voltage converter can be assembled in the body 788603 on the C-track in the standing cabinet.Programming is done with MFV post-dialing; the device can also be administered remotely in this manner.


Technical DataOperating voltage 12 ... 48 V DCTransmission distance max. 30 km (LWL)Ambient temperature 0 °C ... 60 °C

Technical DataOperating voltage 12 V DCCurrent consumption @ 12 V DC approx. 100 mAContact load relay 24 V DC/0,5 A (relay 1/2)

24 V DC/1 A (relay 3/4)Ambient temperature -5 °C ... 45 °CFixation mounting railDimensions W: 52 mm H: 89 mm D: 57 mm

Features

• Authorization EN 54-16• 6 Ethernet connections• One relay for the forwarding of fault messages

contact load 24 V DC / 1 A• 2 duplex SC FO connections

1

1

39

¬oQYD

¬n8wk

¬ow'a

¬oQI§/21V

¬oQJ§/21Y

784856

772386

788606

784840.10

784841.10

Serial essernet Interface EDP, bidirectional

Interface Module RS232/V24

Housing Kit

essernet Module 62.5kBd

essernet Module 500kBd

As 784855 but bidirectional with remote control options e.g. for the connection to a BMS building management system.

For the serial essernet interface for a max. length of 15 m.

Housing for the serial essernet interface.

Network interface module for up to 16 network users (e.g. panels respectively SEI). Protocol: similar to DIN 19245 - 1 (Profibus). Topology: loop structure, short circuit and open circuit resistant.

Network interface module same as 784840 essernet loop module, but for a maximum of 31 network users (e.g. panels respectively SEI).

VARIODYN D1 Connection to Fire Detection Technology

Only a TWI RS 232 adapter (Part No. 583386.21) is required for the VARIODYN D1 when connecting it to an essernet-compatible fire alarm system, such as from the IQ8Control and FlexES control series.

You can see below the components necessary for the fire alarm system regarding such a connection.

Connection of a fire detector control unit to a VARIODYN D1 system

Accessories788606 Housing kit772386 Interface-module RS 232/V24772387 Interface-module TTY/CL 20mA784840 essernet micromodule784841 essernet micromodule 500kBd

1

2

3

4

5

6

2

A fully redundant data connection can also be established. For this, at least two DOM and two SEI are necessary.

The essernet micromodule and the interface module are not included and must be ordered sepa-rately, depending on the type of essernet and the serial transmission mode.

1

1

1

1

1

1

1

1


¬[C"§/32%

¬[C7§/32d

¬[CT§/32T

¬[CU§/32W

¬[Cm§/328

¬[Cn§/32;

¬[Ch§/32)

583401.21

583422.21

583451.21

583452.21

583476.21

583477.21

583471.21

Control Cable 12 for UIM

Backup Cable RC 22

Cable for Cabinet Rear Panel DOM4-8

Cable for Cabinet Rear Panel DOM4-24

Output Cable Amplifier - DOM

Output Cable 2 Amplifiers - DOM

Input Cable DOM (G1) - XV Amplifier (G1)

Prefabricated cabling from 12 control contacts of the UIM to the cabinet rear panel; up to 4 pieces connectable per UIM.

Prefabricated cabling of 2 auxiliary channels to 4 bearer channels

Prefabricated cabling of the 100 V-outputs of the DOM4-8 to the cabinet rear panel; 1 piece is connectable per DOM4-8. Also suitable for the cabling of the switch contacts of the DOM4-x to the cabinet rear panel.

Prefabricated cabling of the 100 V outputs of the DOM4-24 to the cabinet rear panel; up to 4 pieces connectable per DOM4-24.

Prefabricated cabling of power amplifiers, 2 channels (max. 100 V) to the DOM.

Prefabricated cabling of power amplifiers, 4 channels (max. 100 V) to the DOM.

Prefabricated cabling from DOM to power output amplifier, 2 channels (LF, control)

VARIODYN D1 Cable Overview

1

1

1

1

1

1

1

41

¬[Ci§/32,

¬[Cj§/32/

¬[Cr_

¬[Csb

¬[Cte

¬[Cwn

¬[Cxq

¬[Cyt

¬[Czw

¬[Cz

¬[C|

583472.21

583473.21

583481

583482

583483

583486

583487

583488

583489

583490

583491

Input Cable DOM (G1) - Amplifier (as of G2)

Input Cable DOM (as of G2) - Amplifier (G1)

Cat 5 Patch Cable, 1 m blue (DAL)



Cat 5 Patch Cable, 1 m yellow (Ethernet)



XLR Cable, Plug - Socket, 1 m

XLR Cable, Plug - Socket, 10 m

Input Cable DOM Amplifier, 0.5 m green

Cable for connecting older 1st generation devices with the current 2nd generation models.

Cable for connecting older 1st generation devices with the current 2nd generation models.

Audio connection line with XLR plug and XLR socket, e.g. for connecting an external audio device to the UIM.

Audio connection line with XLR plug and XLR socket, e.g. for connecting an external audio device to the UIM.

Prefabricated cable from the DOM to the 2-channel power amplifier.


1

2

3

4

5

6

21

1

1

1

1

1

1

1

1

1

1


¬[C¢583492 Audio Connection Line, 1.8 m

Audio cable, stereo cinch.


1

43

Wall Surface Mounted Speakers

Horn Speaker

Sound Projector

48-50

51-52

53

Loudspeaker with EN 54-24 Certificate

1

2

3

4

5

6

Ceiling Speakers 44-47

3


¬[9!&

¬[9")

582400

582401

Recessed Ceiling Loudspeaker DL 06-130/T-EN54


Modern ceiling installation loudspeaker in plastic-coated metal design (RAL 9010) with high efficiency and moisture-proof broadband loudspeaker chassis, certified as per EN 54- 24.DL 06-130/T-EN 54 (130 mm chassis) has a maximum power of 6 W and can be modified to 3 W or 1.5 W if required. Spring clamps with cropped leg spring, increased clamp force and shortened tension distance allow you to assemble it quickly and easily. A smart inner ring mounting prevents the grille from collapsing even under high load due to environ-mental influences. For additional safety, this EN 54-24 ceiling installation loudspeaker is equipped with a ceramic clamp and thermal fuse, and fitted with a fire dome. It has a PG16 cable outlet and blind cover. The fire dome prevents the suction action of the chimney effect with suspended ceilings in case of fire, after some of the loudspeaker membrane has been burnt through.

Modern ceiling installation loudspeaker in plastic-coated metal design (RAL 9010) with high efficiency and moisture-proof broadband loudspeaker chassis, certified as per EN 54- 24.DL 06-165/T-EN 54 (165 mm chassis) has a maximum power of 6 W and can be modified to 3 W or 1.5 W if required. Spring clamps with cropped leg spring, increased clamp force and shortened tension distance allow you to assemble it quickly and easily. A smart inner ring mounting prevents the grille from collapsing even under high load due to environ-mental influences. For additional safety, this EN 54-24 ceiling installation loudspeaker is equipped with a ceramic clamp and thermal fuse, and fitted with a fire dome. It has a PG16 cable outlet and blind cover. The fire dome prevents the suction action of the chimney effect with suspended ceilings in case of fire, after some of the loudspeaker membrane has been burnt through.

Loudspeaker with EN 54-24 Certificate Ceiling Speakers

Technical DataLoading capacity 6 WTransformer power taps 6 / 3 / 1,5 WSPL Pmax / 1 m 101.3 dBSPL 1 W / 1 m 93.5 dBTransmission range 333 ... 18900 HzDispersion angle 180° (H), 180° (V)Ambient temperature -20 °C ... 80 °CColor white, similar to RAL 9010Weight approx. 1 kgCeiling opening (Ø min.) 166 mmDimensions Ø: 180 mm D: 135 mm

Technical DataLoading capacity 6 WTransformer power taps 6 / 3 / 1,5 WSPL Pmax / 1 m 101.7 dBSPL 1 W / 1 m 93.9 dBTransmission range 351 ... 23500 HzDispersion angle 180° (H), 180° (V)Ambient temperature -20 °C ... 80 °CColor white, similar to RAL 9010Weight approx. 1.3 kgCeiling opening (Ø min.) 197 mmDimensions Ø: 220 mm D: 120 mm



1

1

180mm

110mm

135mm

162 mm

124 mm

140 mm

220mm

120mm

93mm

193 mm152 mm

120 mm

45

¬[9#,

¬[9$/

582402

582403



Modern ceiling installation loudspeaker in plastic-coated metal design (RAL 9010) with high efficiency and moisture-proof broadband loudspeaker chassis, certified as per EN 54- 24.DL 10-200/T-EN 54 (200 mm chassis) has a maximum power of 10 W and can be modified to 6 W, 3 W or 1.5 W if required. Spring clamps with cropped leg spring, increased clamp force and shortened tension distance allow you to assemble it quickly and easily. A smart inner ring mounting prevents the grille from collapsing even under high load due to envir-onmental influences.For additional safety, this EN 54-24 ceiling installation loudspeaker is equipped with a ceramic clamp and thermal fuse, and fitted with a fire dome. It has a PG16 cable outlet and blind cover. The fire dome prevents the suction action of the chimney effect with suspended ceilings in case of fire, after some of the loudspeaker membrane has been burnt through.

Modern ceiling installation loudspeaker in plastic-coated metal design (RAL 9010) with high efficiency and moisture-proof broadband loudspeaker chassis, certified as per EN 54- 24.DL 20-130/T-EN 54 (130 mm chassis) has a maximum power of 20 W and can be modified to 15 W, 10 W or 5 W if required. Spring clamps with cropped leg spring, increased clamp force and shortened tension distance allow you to assemble it quickly and easily. A smart inner ring mounting prevents the grille from collapsing even under high load due to envir-onmental influences.For additional safety, this EN 54-24 ceiling installation loudspeaker is equipped with a ceramic clamp and thermal fuse, and fitted with a fire dome. It has a PG16 cable outlet and blind cover. The fire dome prevents the suction action of the chimney effect with suspended ceilings in case of fire, after some of the loudspeaker membrane has been burnt through.


Technical DataLoading capacity 10 WTransformer power taps 10 / 6 / 3 / 1,5 WSPL Pmax / 1 m 106.9 dBSPL 1 W / 1 m 96.9 dBTransmission range 230 ... 20200 HzDispersion angle 178° (H), 178° (V)Ambient temperature -20 °C ... 80 °CColor white, similar to RAL 9010Weight approx. 2.1 kgCeiling opening (Ø min.) 238 mmDimensions Ø: 267 mm D: 217 mm

Technical DataLoading capacity 20 WTransformer power taps 20 / 15 / 10 / 5 WSPL Pmax / 1 m 105.9 dBSPL 1 W / 1 m 92.9 dBTransmission range 323 ... 23400 HzDispersion angle 178° (H), 178° (V)Ambient temperature -20 °C ... 80 °CColor white, similar to RAL 9010Weight approx. 1.8 kgCeiling opening (Ø min.) 166 mmDimensions Ø: 180 mm D: 135 mm

1

2

3

4

5

6

3



1

1

268mm

217mm

188mm

234 mm197mm

120 mm

180mm

166mm140

mm

162 mm140 mm

124 mm


¬[9%2

¬[9&5

582404

582405

Recessed Ceiling Loudspeaker DL 10-165/T plus-EN54

Recessed Ceiling Loudspeaker DL 20-200/T plus-EN54

High-quality 2-way ceiling installation loudspeaker in plastic-coated metal design (RAL 9010) with excellent sound quality. This EN 54-24 certified loudspeaker is optimally protected against humidity by a moisture-proof chassis.DL 10-165/T plus-EN 54 (165 mm chassis) has a maximum power of 10 W and can be modified to 6 W, 3 W or 1.5 W if required. It is best suited for demanding audio system projects like bistros, restaurants, hotels and many other facilities of public life. Spring clamps with cropped leg spring, increased clamp force and shortened tension distance allow you to assemble it quickly and easily.For additional safety, the loudspeaker is equipped with a ceramic clamp and thermal fuse. A fire dome completes the safety equipment of this loudspeaker. It has a PG16 cable outlet and blind cover. The fire dome prevents the suction action of the chimney effect with suspended ceilings in case of fire, after some of the loudspeaker membrane has been burnt through.

High-quality 2-way ceiling installation loudspeaker in plastic-coated metal design (RAL 9010) with excellent sound quality. This EN 54-24 certified loudspeaker is optimally protected against humidity by a moisture-proof chassis.DL 20-200/T plus-EN 54 (200 mm chassis) has a maximum power of 20 W and can be modified to 15 W, 10 W or 5 W if required. It is best suited for demanding audio system projects like bistros, restaurants, hotels and many other facilities of public life. Spring clamps with cropped leg spring, increased clamp force and shortened tension distance allow you to assemble it quickly and easily.For additional safety, the loudspeaker is equipped with a ceramic clamp and thermal fuse. A fire dome completes the safety equipment of this loudspeaker. It has a PG16 cable outlet and blind cover. The fire dome prevents the suction action of the chimney effect with suspended ceilings in case of fire, after some of the loudspeaker membrane has been burnt through.


Technical DataLoading capacity 10 WTransformer power taps 10 / 6 / 3 / 1,5 WSPL Pmax / 1 m 97.7 dBSPL 1 W / 1 m 87.7 dBTransmission range 249 ... 23500 HzDispersion angle 180° (H), 180° (V)Ambient temperature -20 °C ... 80 °CColor white, similar to RAL 9010Weight approx. 1.66 kgCeiling opening (Ø min.) 197 mmDimensions Ø: 220 mm D: 160 mm

Technical DataLoading capacity 20 WTransformer power taps 20 / 15 / 10 / 5 WSPL Pmax / 1 m 102 dBSPL 1 W / 1 m 89 dBTransmission range 220 ... 22000 HzDispersion angle 180° (H), 180° (V)Ambient temperature -20 °C ... 80 °CColor white, similar to RAL 9010Weight approx. 2.6 kgCeiling opening (Ø min.) 238 mmDimensions Ø: 268 mm D: 217 mm



1

1

220mm

120mm

93mm

193 mm152 mm

120 mm

268mm

217mm

188mm

234 mm197mm

120 mm

47

¬[9'8582406 Recessed Ceiling Loudspeaker DL-AB 06-200/T-EN54

The A/B line ceiling installation loudspeaker for voice alarms is certified as per EN 54-24 and offers maximum safety for voice alarm projects.The DL-AB 06- 200/T-EN 54 is equipped with two mutually independent chassis's and two 100 Volt output transformers and enables cost-effective supply via two separate (A/B) lines. In case one line fails, the area can continue to be ensonified due to the loudspeaker redundance. Both the A and B lines are available for each installation position, which thus provides redundance.The ceiling installation loudspeaker DL-AB 06-200/T-EN 54, made up of power-coated metal (in RAL 9010) has 2 x 6 W power, can be modified to 2 x 3 W or 2 x 1.5 W and is equipped with a fire dome. It has a PG16 cable outlet and blind cover.The fire dome prevents the suction action of the chimney effect with suspended ceilings in case of fire, after some of the loudspeaker membrane has been burnt through. The product standard IP54, 24 guarantees operational safety even under difficult ambient conditions. Both A/B line loudspeakers are respectively equipped with 2 integrated ceramic clamps and 2 thermal fuses. The chassis's are protected durably against the action of moisture.


Technical DataLoading capacity 12 WTransformer power taps 2x6 / 3 / 1,5 WSPL Pmax / 1 m 100.2 dBSPL 1 W / 1 m 92.4 dBSPL Pmax / 1m (Double) 103.3 dBSPL 1 W / 1 m (Double) 95.5 dBDispersion angle 145° (H), 145° (V)Ambient temperature -20 °C ... 70 °CColor white, similar to RAL 9010Weight approx. 2.02 kgCeiling opening (Ø min.) 238 mmDimensions Ø: 268 mm D: 100 mm

1

2

3

4

5

6

3


1

268mm

217mm

188mm

234 mm197mm

120 mm


¬[95b

¬[96e

582420

582421

Wall Surface Mount Speaker WA 06-165/T-EN54

Wall Surface Mount Speaker WA 06-165/T Metal-EN54

Wall Surface-Mount Speaker EWA 06-165/T with high-quality 165 mm broadband loud-speaker chassis with softline design.

The wall surface-mount speaker with high density MDF wood casing for low resonance sound is very versatile in use, for example for providing PA services in government build-ings, schools or hospitals. The proven spring-loaded snap lock on the back panel guaran-tees quick wall mounting.

WA-06-165/T Metal EN 54 is a vandal-proof wall-mounted loudspeaker designed entirely in metal with a maximum power of 6 W. It can be modified to 3 W or 1.5 W if required. Very good speech intelligibility is ensured by the 165 mm broadband chassis. The corrosion- resistant powder-coating (RAL 9010) ensures durable protection against environmental influences. The loudspeaker is equipped with an integrated ceramic clamp and thermal fuse. In addition, the loudspeaker chassis's are protected against the action of moisture.

Loudspeaker with EN 54-24 Certificate Wall Surface Mounted Speakers

In comparison to the first edition of our “Voice Alarm” catalogue we have significantly expanded and optimized our portfolio of loudspeakers. You will find all the relevant tech-nical data in this chapter so that you can optimally and efficiently use these loudspeakers in your projects. Moreover, a planning handbook is available for you for download in the service area of our homepage. This handbook contains comprehensive calculation prin-ciples, planning examples, value tables and comments/tips on the standards and guidelines currently valid.

Technical DataLoading capacity 6 WTransformer power taps 6 / 3 / 1,5 WSPL Pmax / 1 m 102.4 dBSPL 1 W / 1 m 94.6 dBTransmission range 178 ... 13900 HzDispersion angle 180° (H), 180° (V)Ambient temperature -20 °C ... 80 °CType of protection IP54Color white, similar to RAL 9010Weight approx. 1.95 kgDimensions W: 252 mm H: 192 mm D: 80 mm

Technical DataLoading capacity 6 WTransformer power taps 6 / 3 / 1,5 WSPL Pmax / 1 m 101.5 dBSPL 1 W / 1 m 93.7 dBTransmission range 111 ... 19000 HzDispersion angle 180° (H), 180° (V)Ambient temperature -20 °C ... 80 °CColor white, similar to RAL 9010Weight approx. 2.45 kgDimensions W: 257 mm H: 192 mm D: 80 mm



1

1

192mm

82mm252 mm

192mm

80mm257 mm

49

¬[97h

¬[98k

582422

582423

Wall Surface Mount Speaker WA-AB 06-100/T-EN54

Wall Surface Mount Speaker DL-A 10-165/T-EN54

The A/B line wall-mounted loudspeaker for voice alarms is certified as per EN 54-24 and offers maximum safety for voice alarm projects.The WA-AB 06- 100/T-EN 54 is equipped with two mutually independent chassis's and two 100 Volt output transformers. It enables the cost-effective power supply of the two sepa-rate (A/B) lines. In case one line fails, the area can continue to be ensonified due to the loudspeaker redundance. Both the A and B lines are available for each installation position, which thus provides redundance. The wall-mounted loudspeaker WA-AB 06-100/T-EN 54 has 2 x 6 W power and can be modified to 2 x 3 W or 2 x 1.5 W. The high-density MDF wooden body (white) ensures low-resonance sound, the simple assembly is done via screw connectors with the rear panel. It has a PG16 cable outlet and blind cover. The product standard IP54, 24 guarantees operational safety even under difficult ambient conditions. Both A/B line loudspeakers are respectively equipped with 2 integrated ceramic clamps and 2 thermal fuses. The chassis's are protected durably against the action of moisture.

Surface mount loudspeaker made of powder-coated metal in white with high efficacy and a high-quality 165 mm broad band loudspeaker chassis.

The EDL-A 10-165/T can be installed on ceilings and walls where flush mounting is not possible. Flat and elegant design for unobtrusive installations which can be realized without bothersome “extruding lips” thanks to the hidden mounting bracket.


Technical DataLoading capacity 12 WTransformer power taps 2x6 / 3 / 1,5 WSPL Pmax / 1 m 100.8 dBSPL 1 W / 1 m 93 dBSPL Pmax / 1m (Double) 103.6 dBSPL 1 W / 1 m (Double) 95.8 dBDispersion angle 150° (H), 150° (V)Ambient temperature -20 °C ... 70 °CType of protection IP54Color white, similar to RAL 9010Weight approx. 2.3 kgDimensions W: 252 mm H: 192 mm D: 82 mm

Technical DataLoading capacity 10 WTransformer power taps 10 / 6 / 3 / 1,5 WSPL Pmax / 1 m 103.8 dBSPL 1 W / 1 m 93.8 dBTransmission range 290 ... 23400 HzDispersion angle 180° (H), 180° (V)Ambient temperature -20 °C ... 150 °CColor white, similar to RAL 9010Weight approx. 1.23 kgDimensions Ø: 170 mm D: 75 mm

1

2

3

4

5

6

3



1

1

192mm

82mm252 mm

170mm

75mm


¬[99n

¬[9:q

582424

582425

Wall Surface Mount Speaker DL-A 10-200/T-EN54

Wall Flush Mount Speaker WU 06-165/T-EN54



The white WU 06-165/T EN has been especially developed for flush-mounted installations. The stable, rectangular flush-mounted wall loudspeaker with stable lattice grille made of steel plates is also attractive due to its decent Softline Look. It has a maximum power of 6 W, and can be modified to 3 W or 1.5 W if required. A high-quality 165 mm broadband loudspeaker chassis ensures balanced sound dynamics.The loudspeaker is protected against dust and other environmental influences by an impact-resistant, ABS flush-mounted black plastic body. The loudspeaker is equipped with an integrated ceramic clamp and thermal fuse. In addition, the loudspeaker chassis's are protected against the action of moisture.


Technical DataLoading capacity 10 WTransformer power taps 10 / 6 / 3 / 1,5 WSPL Pmax / 1 m 106.6 dBSPL 1 W / 1 m 96.6 dBTransmission range 275 ... 19100 HzDispersion angle 180°Ambient temperature -20 °C ... 80 °CColor white, similar to RAL 9010Weight approx. 1.69 kgDimensions Ø: 210 mm D: 75.5 mm

Technical DataLoading capacity 6 WTransformer power taps 6 / 3 / 1,5 WSPL Pmax / 1 m 101.6 dBSPL 1 W / 1 m 93.8 dBTransmission range 325 ... 23500 HzDispersion angle 180° (H), 180° (V)Ambient temperature -20 °C ... 80 °CColor white, similar to RAL 9010Weight approx. 1.3 kgDimensions W: 255 mm H: 195 mm D: 88 mm



1

1

210mm

75,5mm

195mm

88mm

255 mm

51

¬[9?¢

¬[9@¥

582430

582431

Horn Loudspeaker DK 10/T EN54


The horn loudspeaker, DK 10/T-EN 54, certified as per EN 54-24, offers high acoustic pres-sure and durable weather resistance, ideal for industrial use. The high protection class IP66 ensures operational safety even under very difficult conditions. For more safety, the loudspeaker is additionally equipped with a ceramic clamp and thermal fuse. The impact- resistant ABS body as per UL94V0 ensures durable stability. Delivered along with a U- shaped, universal rust-free bracket for flexible assembly. The flexible power modification can easily be done on the back of the loudspeaker, 10 W, 5 W, 2.5 W, 1.25 W. The DK 10/ T-EN 54 is also suitable for use in outdoor areas.

The horn loudspeaker, DK 15/T-EN 54, certified as per EN 54-24, offers high acoustic pres-sure and durable weather resistance, ideal for industrial use. The high protection class IP66 ensures operational safety even under very difficult conditions. For more safety, the loudspeaker is additionally equipped with a ceramic clamp and thermal fuse. The impact- resistant ABS body as per UL94V0 ensures durable stability. Delivered along with a U- shaped, universal rust-free bracket for flexible assembly. The flexible power modification can easily be done on the back of the loudspeaker, 15 W, 7.5 W, 3.75 W, 1.87 W. The DK 15/T-EN 54 is also suitable for use in outdoor areas.

Loudspeaker with EN 54-24 Certificate Horn Speaker

Technical DataLoading capacity 10 WTransformer power taps 10 / 5 / 2,5 / 1,25 W (20)SPL Pmax / 1 m 108 dBSPL 1 W / 1 m 98 dBTransmission range 418 ... 12400 HzDispersion angle 140° (H), 140° (V)Ambient temperature -40 °C ... 85 °CType of protection IP66Color gray, similar to RAL 7035Weight approx. 1.4 kgDimensions Ø: 142 mm D: 210 mm

Technical DataLoading capacity 15 WTransformer power taps 10 / 7,5 / 3,75 / 1,87 W (20)SPL Pmax / 1 m 112.3 dBSPL 1 W / 1 m 100.5 dBTransmission range 454 ... 10400 HzDispersion angle 140° (H), 140° (V)Ambient temperature -40 °C ... 85 °CType of protection IP66Color gray, similar to RAL 7035Weight approx. 1.9 kgDimensions Ø: 208.5 mm D: 271.5 mm

1

2

3

4

5

6

3



1

1

141,5mm

128mm

207,5mm

208,5mm

128mm

271mm


¬[9A¨

¬[9B"

582432

582433


Horn Loudspeaker DK-MH 30/T plus-EN54

The horn loudspeaker, DK 30/T-EN 54, certified as per EN 54-24, offers high acoustic pres-sure and durable weather resistance, ideal for industrial use. The high protection class IP66 ensures operational safety even under very difficult conditions. For more safety, the loudspeaker is additionally equipped with a ceramic clamp and thermal fuse. The impact- resistant ABS body as per UL94V0 ensures durable stability. Delivered along with a U- shaped, universal rust-free bracket for flexible assembly. The flexible power modification can easily be done on the back of the loudspeaker, 30 W, 20 W, 10 W, 5 W. The DK 30/T-EN 54 is also suitable for use in outdoor areas.

The 2-way music horn DK-MH 30/T plus-EN 54 with impact-resistant ABS light gray body (similar to RAL 7035) and protection class IP66 enhances the horn series for voice alarms. For more safety, the loudspeaker is additionally equipped with a thermal fuse. Enormous acoustic pressure and very good music quality are persuasive features, as well as the simple and flexible assembly for the rust-free universal aluminum bracket. The flexible power modification can easily be done at the rear of the loudspeaker, 30 W, 15 W, 7.5 W, 3.75 W. The DK MH30/T plus-EN 54 is also suitable for use in outdoor areas.

Loudspeaker with EN 54-24 Certificate Horn Speaker

Technical DataLoading capacity 30 WTransformer power taps 30 / 20 / 10 / 5 W (20)SPL Pmax / 1 m 117.1 dBSPL 1 W / 1 m 102.3 dBTransmission range 410 ... 10200 HzDispersion angle 130° (H), 130° (V)Ambient temperature -40 °C ... 85 °CType of protection IP66Color gray, similar to RAL 7035Weight approx. 2.6 kgDimensions Ø: 238 mm D: 302 mm

Technical DataLoading capacity 30 WTransformer power taps 30 / 15 / 7,5 / 3,75 WSPL Pmax / 1 m 113.4 dBSPL 1 W / 1 m 98.6 dBTransmission range 222 ... 23000 HzDispersion angle 75° (H), 110° (V)Ambient temperature -40 °C ... 85 °CColor white, similar to RAL 9010Weight approx. 4.5 kgDimensions W: 370 mm H: 255 mm D: 291 mm



1

1

238mm

128mm

302mm

255mm

120mm

291mm

370 mm

53

¬[9I7

¬[9J:

582440

582441

Sound Projector DA-S 10-130/T EN54

Sound Projector DA-S 20-130/T EN54

The DA-S 10-130/T-EN 54 sound projector with a 130-mm broadband loudspeaker chassis has high stability, is high-performance and certified as per EN 54-24. Due to its good speech intelligibility, this sound projector is especially suitable for applications in corridors and work floors. Equipped with ceramic clamps and thermal fuse, the sound projectors meet the highest safety requirements. The sound projector has a maximum power of 10 W and can also be modified to 6 W, 3 W and 1.5 W. The chassis's of the sound projectors are best protected against humidity due to their special construction choice of material and production details. The DA-S sound projector with IP65 are completely made of robust aluminum and additionally plastic-coated with RAL 9010. Corrosion can thus not occur. Optionally, you can get a mast bracket (581281) for the DA-S 10-130/T-EN 54 for a mast diameter of about 200 mm.

The DA-S 20-130/T-EN 54 sound projector with a 130-mm broadband loudspeaker chassis has high stability, is high-performance and certified as per EN 54-24. Due to its good speech intelligibility, this sound projector is especially suitable for applications in corridors and work floors. Equipped with ceramic clamps and thermal fuse, the sound projectors meet the highest safety requirements. The sound projector has a maximum power of 20 W and can also be modified to 15 W, 10 W and 5 W. The chassis's of the sound projectors are best protected against humidity due to their special construction choice of material and production details. The DA-S sound projector with IP65 are completely made of robust aluminum and additionally plastic-coated with RAL 9010. Corrosion can thus not occur. Optionally, you can get a mast bracket (581281) for the DA-S 20-130/T-EN 54 for a mast diameter of about 200 mm.

Loudspeaker with EN 54-24 Certificate Soundprojector

Technical DataLoading capacity 10 WTransformer power taps 10 / 6 / 3 / 1,5 WSPL Pmax / 1 m 101.2 dBSPL 1 W / 1 m 91.2 dBTransmission range 143 ... 18800 HzDispersion angle 360° (H), 360° (V)Ambient temperature -40 °C ... 100 °CType of protection IP65Color white, similar to RAL 9010Weight approx. 3.1 kgDimensions Ø: 167 mm D: 163 mm

Technical DataLoading capacity 20 WTransformer power taps 20 / 15 / 10 / 5 WSPL Pmax / 1 m 105.1 dBSPL 1 W / 1 m 92.1 dBTransmission range 146 ... 22200 HzDispersion angle 360° (H), 360° (V)Ambient temperature -40 °C ... 100 °CType of protection IP65Color white, similar to RAL 9010Weight approx. 3.15 kgDimensions Ø: 167 mm D: 163 mm

1

2

3

4

5

6

3


1

1

167mm

163mm

167mm

163mm


Notes

55

Wall Surface Mounted Speakers

Sound Projector

Horn Speaker

Spherical Speaker

Slim Column System

Music Cabinet Speaker

Accessories

62-64

65

66

67

68

69

70-71

Standard Loudspeaker

1

2

3

4

5

6

Ceiling Speakers 56-61

4


¬[-&¦

¬[-+,

¬[-,/

581205

581210

581211

Recessed Ceiling Loudspeaker MC 4TA

Recessed Ceiling Loudspeaker PC 3, 6 W

Recessed Ceiling Loudspeaker PC 5T, 10 W

Metal ceiling loudspeaker with integrated 100 V transformer in white. The MC 4T is perfect for recessed mounting. Mounts easily and almost invisibly.

Designed for quick and easy installation, recessed in hanging ceilings or panels, the MC series is ideal for background music and announcements.

Plastic ceiling loudspeaker with integrated 100 V transformer, metallic lattice, double conical, fire dome in white. The PC 3 is perfectly adjusted for recessed, almost invisible and easy mounting.

Designed for quick and easy installation, recessed in hanging ceilings or panels, the PC series is ideal for background music and announcements. Equipped with a transformer for systems with constant voltage.

Plastic ceiling loudspeaker with integrated 100 V transformer and metallic lattice. The PC 5T is perfect for recessed mounting. Mounts easily and almost invisibly.


Standard Loudspeaker Ceiling Speakers

Technical DataLoading capacity 6 WTransformer power taps 6 / 3 / 1,5 WSPL Pmax / 1 m 97 dBSPL 1 W / 1 m 90 dBTransmission range 110 ... 17000 HzImpedance 8 ΩDispersion angle 180 ° (H) x 180° (V)Material metalColor whiteWeight approx. 0.7 kgDimensions Ø: 180 mm D: 50 mm

Technical DataLoading capacity 6 WTransformer power taps 100 V/6-3-1,5 WSPL Pmax / 1 m 91 dBSPL 1 W / 1 m 81 dBTransmission range 150 ... 20000 HzImpedance 8 ΩDispersion angle 180° (H) x 180° (V)Material ABS plastic housing, stainless steel U bracket & hardwareColor whiteWeight approx. 0.6 kgDimensions Ø: 115 mm D: 85 mm

Technical DataLoading capacity 10 WTransformer power taps 100 V/10-5-2,5-1,25 WSPL Pmax / 1 m 98 dBSPL 1 W / 1 m 88 dBTransmission range 90 ... 20000 HzDispersion angle 120° konischMaterial plasticColor whiteWeight approx. 1.1 kgDimensions Ø: 190 mm D: 70 mm


1

1

1

180mm

155mm

50mm max. 21 mm

190mm

170mm

70mm

57

¬[--2

¬[-7P

581212

581222

Recessed Ceiling Loudspeaker PC 8T, 20 W

Recessed Ceiling Loudspeaker EVAC 5, 6 W – with Fire Dome

Plastic ceiling loudspeaker with integrated 100 V transformer and metallic lattice. The PC 5T is perfect for recessed mounting. Mounts easily and almost invisibly.


Metal cover loudspeaker with integrated 100 V transformer, metallic lattice and fire dome.

Designed for quick and easy installation, recessed in hanging ceilings or panels, the EVAC series is ideal for background music and announcements.

With the integrated ceramic terminal and thermal fuse this loudspeaker is in compliance with EN 60849 and is suitable for ENS/VAS/VA applications.


Technical DataLoading capacity 20 WTransformer power taps 100 V/20-10-5-2,5 WSPL Pmax / 1 m 101 dBSPL 1 W / 1 m 88 dBTransmission range 80 ... 20000 HzDispersion angle 120° konischMaterial plasticColor whiteWeight approx. 2.1 kgDimensions Ø: 245 mm D: 95 mm

Technical DataLoading capacity 6 WTransformer power taps 100 V/6-3-1,5-0,75-0,25 WSPL Pmax / 1 m 106 dBSPL 1 W / 1 m 93 dBTransmission range 240 ... 20000 HzDispersion angle 180° conicalMaterial steelColor white, similar to RAL 9016

black, similar to RAL 9005 (fire dome)Weight approx. 1.3 kgDimensions Ø: 185 mm D: 118 mm

1

2

3

4

5

6

4



1

1

245mm

225mm

95mm

185mm

165mm

118mm


¬[-8S

¬[-J"

581223

581241

Recessed Ceiling Loudspeaker EVAC 6, 10 W - with Fire Dome

Ceiling Loudspeaker EVAC 50X

Metal recessed ceiling loudspeaker with fire dome, 100 V transformer, frame and metallic lattice in white.

Designed for quick and easy installation, recessed in hanging ceilings or panels, the EVAC series is ideal for background music and announcements.

With the integrated ceramic terminal and thermal fuse this loudspeaker is in compliance with the EN 60849 and is suitable for ENS/VAS/VA applications.

Metal ceiling loudspeaker with built-in 100-V-transformer with power taps, metal grill, steel fire housing and 5" (127 mm) full range speaker. Designed to be mounted in false ceilings or panels. EVAC 5 equipped with ceramic wire terminal and thermal fuse and is designed for use in a voice alarm applications for clear and intelligible speech announcements and background music. Fully compliant to EN60849.


Technical DataLoading capacity 10 WTransformer power taps 100 V/10-5-2,5 WSPL Pmax / 1 m 102 dBSPL 1 W / 1 m 93 dBTransmission range 150 ... 20000 HzDispersion angle 180° conicalMaterial metalColor white

orange, similar to RAL 2008 (fire dome)Weight approx. 1.43 kgDimensions Ø: 200 mm D: 101 mm

Technical DataLoading capacity 6 WTransformer power taps 100 V/6-3-1,5-0,75-0,25 WSPL Pmax / 1 m 102 dBSPL 1 W / 1 m 92 dBTransmission range 150 ... 18000 HzDispersion angle 180° (H) x 180° (V)Material metalColor white, similar to RAL 9016

orange, similar to RAL 2008 (fire dome)Weight approx. 1.32 kgDimensions Ø: 180 mm D: 121 mm



1

1

200mm

175mm

82,5mm

101mm

180mm

160mm

130mm

59

¬[-R:

¬[-WI

¬[-YO

581249

581254

581256

Ceiling Loudspeaker MC 5

Ceiling Loudspeaker EDL 06-165/T

Ceiling Loudspeaker EDLBW 06-165/T, impact-resistant

High sensitivity full range ceiling loudspeakers. Light paper diaphragm and high efficiency magnet are the reason of high performance in middle sound frequency. MC 4TA is desi-gned to use in public address systems. Good choice for background music systems in large buildings.

The metal bayonet recessed ceiling loudspeaker with a 165 mm broadband loudspeaker chassis and high efficacy offers excellent sound for all applications. Spring-loaded snap lock with cranked leg spring, clamping strength and shorter tension interval facilitate fast and simple mounting. Flush installation is thus possible with suspended ceilings.

Same as Part No. 581254 but impact-resistant and therefore especially suitable for schools and gyms. The white lattice front is made of sheet steel and is extremely robust.


Accessories581255 Fire Dome (EF 165) for Recessed Ceiling Loudspeakers Part No. 581254

Technical DataLoading capacity 10 WTransformer power taps 100 V/10-5-2,5 WSPL Pmax / 1 m 113 dBSPL 1 W / 1 m 94 dBTransmission range 100 ... 17000 HzDispersion angle 180° conicalMaterial metalColor white, similar to RAL 9016Weight approx. 0.75 kgDimensions Ø: 200 mm D: 54 mm

Technical DataLoading capacity 6 WTransformer power taps 6 / 3 / 1,5 WSPL Pmax / 1 m 105.7 dBSPL 1 W / 1 m 97.9 dBTransmission range 100 ... 16000 HzDispersion angle 180°Color white, similar to RAL 9010Weight approx. 1.3 kgDimensions Ø: 220 mm D: 100 mm

Technical DataLoading capacity 6 WTransformer power taps 6 / 3 / 1,5 WSPL Pmax / 1 m 105.7 dBSPL 1 W / 1 m 97.9 dBTransmission range 100 ... 16000 HzDispersion angle 180°Color white, similar to RAL 9010Weight approx. 1.3 kgDimensions Ø: 220 mm D: 100 mm

1

2

3

4

5

6

4


1

1

180mm

155mm

50mm

220mm

168mm

197mm100

mm33 mm

70 mm 90 mm

73mm


¬[-XL

¬[-s6

581255

581282

Fire Dome (EF 165) for Ceiling Loudspeakers Part No. 581254

Ceiling Loudspeaker EDL 10-165/T

Fire Dome (EF 165) for recessed ceiling loudspeakers (Part No. 581254) for increasing level of passive safety. The fire dome prevents suction in the chimney effect present with suspended ceilings should a fire occur after a possible blowing out of the loudspeaker membrane.

The Bayonet Recessed Ceiling Loudspeaker with a 165 mm broadband loudspeaker chassis and high efficacy offers excellent sound for all applications. Spring-loaded snap lock with cranked leg spring, increased clamping strength and shorter tension interval make mounting fast and easy. Flush installation is possible even with suspended ceilings.


Technical DataColor blackWeight approx. 0.35 kgDimensions Ø: 162 mm D: 61 mm

Technical DataLoading capacity 10 WTransformer power taps 10 / 6 / 3 / 1,5 WSPL Pmax / 1 m 107.5 dBSPL 1 W / 1 m 97.5 dBTransmission range 100 ... 17000 HzDispersion angle 177°Color white, similar to RAL 9010Weight approx. 1.35 kgDimensions Ø: 220 mm D: 100 mm

The fire dome is not suitable as a concrete built-in dome.



1

1

162mm

61mm

12,5 mm Ø

152 mm

120mm

220mm

168mm

197mm100

mm33 mm

70 mm 90 mm

73mm

61

¬[-t9

¬[-u<

581283

581284

Ceiling Loudspeaker EDL 10-165/T plus / 2-ways System

Ceiling Loudspeaker EDL 20-200/T plus / 2-way System

The Bayonet Recessed Ceiling Loudspeaker made of powder-coated metal in white (RAL 9010) offers excellent sound thanks to modern 2-way technology and its impressively small built-in depth.

Spring-loaded snap lock with cranked leg spring, increased clamping strength and shorter tension interval facilitate fast and easy mounting. Flush installation is possible even with suspended ceilings.

The Bayonet Recessed Ceiling Loudspeaker made of powder-coated metal in white (RAL 9010) offers excellent sound thanks to modern 2-way technology and its impressively small built-in depth.

Spring-loaded snap lock with cranked leg spring, increased clamping strength and shorter tension interval facilitate fast and easy mounting. Flush installation is possible even with suspended ceilings.


Technical DataLoading capacity 10 WTransformer power taps 10 / 6 / 3 / 1,5 WSPL Pmax / 1 m 104 dBSPL 1 W / 1 m 94 dBTransmission range 63 ... 20000 HzDispersion angle 180°Color white. similar to RAL 9010Weight approx. 1.66 kgDimensions Ø: 220 mm D: 119 mm

Technical DataLoading capacity 20 WTransformer power taps 20 / 15 / 10 / 5 WSPL Pmax / 1 m 110.8 dBSPL 1 W / 1 m 98 dBTransmission range 80 ... 14300 HzDispersion angle 180°Color white. similar to RAL 9010Weight approx. 2.24 kgDimensions Ø: 267 mm D: 100 mm

1

2

3

4

5

6

4



1

1

220mm

168mm

200mm

100mm

33 mm120 mm90 mm

73mm

267mm

212mm

238 mm349 mm

103mm 100 mm


¬[-5J

¬[-6M

¬[-=b

581220

581221

581228

Wall Surface Mount Speaker W10, 10 W, white

Wall Surface Mount Speaker W3, 3 W, white

Wall Surface Mount Speaker iSpeak 6

Loudspeaker plastic housing with integrated 100 V transformer and metallic lattice, avail-able in white or papyrus white. The full-range W3 is tailored to the small budget.

Designed for easy mounting on any flat surface. Equipped with a transformer for systems with constant voltage.

Loudspeaker plastic housing with integrated 100 V transformer and metallic lattice, avail-able in white or papyrus white. The full-range W3 is tailored to the small budget.

Designed for easy mounting on any flat surface. Equipped with a transformer for systems with constant voltage.

Plastic wall speaker with integrated 100 V transformer. The loudspeaker is designed to be easily mounted on any flat surface.

Standard Loudspeaker Wall Surface Mounted Speakers

Technical DataLoading capacity 10 WTransformer power taps 10 W – 5 W – 2,5 WSPL Pmax / 1 m 101 dBSPL 1 W / 1 m 87 dBTransmission range 200 ... 15000 HzDispersion angle 180° (H) x 180° (V)Material ABS plastic housingColor white, similar to RAL 9016Weight approx. 900 gDimensions W: 180 mm H: 230 mm D: 100 mm (housing)

Ø: 130 mm (full range) / Chassis

Technical DataLoading capacity 3 WTransformer power taps 3 W – 1,5 W – 0,75 WSPL Pmax / 1 m 93 dBSPL 1 W / 1 m 84 dBTransmission range 200 ... 15000 HzDispersion angle 180° (H) x 180° (V)Material ABS plastic housingColor white, similar to RAL 9016Weight approx. 900 gDimensions W: 180 mm H: 230 mm D: 100 mm (housing)

Ø: 130 mm (full range) / Chassis

Technical DataLoading capacity 6 WTransformer power taps 6 W - 3 WSPL Pmax / 1 m 99 dBSPL 1 W / 1 m 92 dBTransmission range 130 ... 17000 HzDispersion angle 180° (H) x 140° (V)Material ABS plastic housing / steelColor white, similar to RAL 9018Weight approx. 1 kgDimensions W: 166 mm H: 267 mm D: 80 mm

1

1

1

185mm

90mm

190 mm

185mm

90mm

190 mm

63

¬[-UC

¬[-VF

581252

581253

Wall Surface Mount Speaker EWA06-165/T, white

Wall Surface Mount Speaker EWA BW 06-165/T, white - impact-resistant

Wall Surface-Mount Speaker EWA 06-165/T with high-quality 165 mm broadband loud-speaker chassis with softline design.

The wall surface-mount speaker with high density MDF wood casing for low resonance sound is very versatile in use, for example for providing PA services in government build-ings, schools or hospitals. The proven spring-loaded snap lock on the back panel guaran-tees quick wall mounting.

Same as 581252 but impact-resistant and therefore especially suitable for schools and gyms. The white lattice front is made of sheet steel and is extremely robust.


Technical DataLoading capacity 6 WTransformer power taps 6 / 3 / 1,5 WSPL Pmax / 1 m 105.3 dBSPL 1 W / 1 m 97.5 dBTransmission range 125 ... 15000 HzDispersion angle 180°Color white, similar to RAL 9010Weight approx. 1.8 kgDimensions W: 252 mm H: 192 mm D: 82 mm

Technical DataLoading capacity 6 WTransformer power taps 6 / 3 / 1,5 WSPL Pmax / 1 m 105.3 dBSPL 1 W / 1 m 97.5 dBTransmission range 125 ... 15000 HzDispersion angle 180°Color white, similar to RAL 9010Weight approx. 1.8 kgDimensions W: 252 mm H: 192 mm D: 82 mm

1

2

3

4

5

6

4


1

1

192mm

82mm252 mm

192mm

82mm252 mm


¬[-ZR 581257 Wall / Ceiling Loudspeaker EDL A 10-165/T, round




Technical DataTransformer power taps 10 / 6 / 3 / 1,5 WSPL Pmax / 1 m 114.6 dBSPL 1 W / 1 m 98.8 dBTransmission range 300 ... 18000 HzDispersion angle 180°Color white, similar to RAL 9010Weight approx. 1.23 kgDimensions Ø: 170 mm D: 75 mm

Features

• Vandal-proof


1

170mm

75mm

65

¬[-@k

¬[-An

581231

581232

Sound Projector SPM 20, 20 W

Sound Projector SP 10, 10 W

Same as 581232, but 20 W.

This projector loudspeaker is characterized by a large sound and its high sound quality in the reproduction of both music and voice.

The SP10 consists of high-quality plastics, manufactured with aluminum bracket. Due to its IP 55 protection it can be used in almost any commercial or industrial environment: Supermarkets, public swimming pools, warehouses, factories, railway stations, parking lots etc.

Standard Loudspeaker Sound Projector

Technical DataLoading capacity 20 WTransformer power taps 20 W - 10 W – 5 WSPL Pmax / 1 m 105 dBSPL 1 W / 1 m 92 dBTransmission range 130 ... 15000 HzDispersion angle 140° konischMaterial Aluminium, stainless steel bracketColor papyrus whiteWeight approx. 2.2 kgDimensions Ø: 138 mm D: 205 mm (Gehäuse)

Technical DataLoading capacity 10 WTransformer power taps 10 / 5 / 2,5 WSPL Pmax / 1 m 101 dBSPL 1 W / 1 m 91 dBTransmission range 130 ... 15000 HzDispersion angle 130° conicalType of protection IP55Material ABS, stainless steel bracketColor white, similar to RAL 9016Weight approx. 1.6 kgDimensions Ø: 138 mm D: 205 mm

1

2

3

4

5

6

4



1

1

138mm

205mm


¬[-#

¬[-$~

¬[-r3

581202

581203

581281

Horn Loudspeaker HQ15, 15 W, IP66

Horn Loudspeaker HQ30, 30 W, IP66

Mast Holder EMB 200

Water-proof ABS plastic horn speaker with integrated 100 V transformer. Ideal for both clear playing of voice messages as well as background music.

Water-proof ABS plastic horn speaker with integrated 100 V transformer. Ideal for both clear playing of voice messages as well as background music.

Our mounting solution is made of powder-coated steel and includes mounting clamps. It guarantees for a lasting hold of the pressure chamber loudspeakers and sound projectors on masts even in ‘difficult’ surroundings.

The mast holder is suitable for a wide selection of venues such as stadiums, industrial plants, exhibitions etc.

Standard Loudspeaker Horn Speaker

Technical DataLoading capacity 15 WTransformer power taps 15 / 7,5 WSPL Pmax / 1 m 117 dBSPL 1 W / 1 m 105 dBTransmission range 400 ... 5000 HzDispersion angle 140° (H), 90° (V)Type of protection IP66Material plastic, aluminium U bracketColor white, similar to RAL 9010Weight approx. 1.4 kgDimensions W: 222 mm H: 280 mm D: 205 mm

Technical DataLoading capacity 30 WTransformer power taps 30 / 15 WSPL Pmax / 1 m 120 dBSPL 1 W / 1 m 105 dBTransmission range 400 ... 6000 HzDispersion angle 140° (H), 90° (V)Type of protection IP66Material plastic, aluminium U bracketColor white, similar to RAL 9010Weight approx. 1.8 kgDimensions W: 285 mm H: 162 mm D: 232 mm

Technical DataMaterial steelColor silver, similar to RAL 9006Weight approx. 460 gDimensions H: 200 mm

Suitable only for Part Nos. 581287, 581288 and 581258.




1

1

1

162mm

222mm

232mm

205mm

285mm

280mm

67

¬[-0; 581215 Plastic Spherical Loudspeakers SL20M, 20 W, white

Spherical loudspeaker with real surround sound. A 360° horizontal and 140° vertical sound emission results in almost total coverage. Excellent emission, a steady frequency response and good efficiency make this loudspeaker the answer to many acoustics problems.

Ideal for fitting large areas for sound, such as warehouses, entrance halls or factories. Can be used for both voice as well as music.

Standard Loudspeaker Spherical Speaker

Technical DataLoading capacity 20 WTransformer power taps 20 / 10 / 5 WSPL Pmax / 1 m 112 dBSPL 1 W / 1 m 93 dBTransmission range 180 ... 20000 HzDispersion angle 160°Color whiteWeight approx. 1.7 kgConnection lead max. 2 mDimensions Ø: 210 mm

1

2

3

4

5

6

4


1

210m

m


¬[-"x

¬[-Ct

581201

581234

Sound Column COM 20, 20 W

Sound Column COM 40, 40 W

Water-proof column loudspeaker for outdoor usage. Large frequency range and high sens-itivity make the speaker suitable for announcements and/or background music in large areas.

The COM 20 is usually used anywhere where high resistance to environmental influences is needed, such as railway stations, churches, factories, storage depots and outdoor parking lots.

Water-proof column loudspeaker for outdoor usage. Large frequency range and high sens-itivity make the speaker suitable for announcements and/or background music in large areas.

The COM 40 is usually used anywhere where high resistance to environmental influences is needed, such as railway stations, churches, factories, storage depots and outdoor parking lots.

Standard Loudspeaker Slim Column System

Technical DataLoading capacity 20 WTransformer power taps 20 / 10 WSPL Pmax / 1 m 105 dBSPL 1 W / 1 m 92 dBTransmission range 100 ... 15000 HzDispersion angle 180° (H), 150° (V)Type of protection IP54Material aluminiumColor grey, similar to RAL 7038Weight approx. 2.9 kgDimensions W: 151 mm H: 378 mm D: 125 mm

Technical DataLoading capacity 40 WTransformer power taps 40 / 20 WSPL Pmax / 1 m 110 dBSPL 1 W / 1 m 94 dBTransmission range 100 ... 15000 HzDispersion angle 180° (H), 150° (V)Type of protection IP54Material aluminiumColor grey, similar to RAL 7038Weight approx. 4.7 kgDimensions W: 151 mm H: 618 mm D: 125 mm



1

1

69

¬[-1>

¬[-3D

581216

581218

Loudspeaker Box VIVA-3 302 WT, 15 W, white

Loudspeaker Box VIVA-3 502 WT, 25 W, white

2-way encased loudspeaker with wall-mounting bracket and integrated 100 V transformer. The VIVA-3 series is perfectly suitable for background music.The 80 mm Mica Cone Rubber Edge Woofer, the 13 mm Mylar Dome Tweeter and the U- shaped wall-mounting bracket (included) contribute to the unbelievable popularity of this series among all of our customers. It also is equipped with a rotating logo which self- adjusts according to the mounting position.

Same as 581216, but 25 W.

Standard Loudspeaker Music Cabinet Speaker

Technical DataLoading capacity 15 WTransformer power taps 15 W – 7.5 W – 3 W – 8 OhmSPL Pmax / 1 m 102 dBSPL 1 W / 1 m 87 dBTransmission range 150 ... 20000 HzDispersion angle 170° (H), 180° (V)Material ABS plastic housing, stainless steel U bracket & hardwareColor whiteWeight approx. 1.5 kg

Technical DataLoading capacity 25 WTransformer power taps 25 W – 15 W – 5 W – 8 OhmSPL Pmax / 1 m 108.7 dBSPL 1 W / 1 m 91 dBTransmission range 70 ... 20000 HzDispersion angle 180° (H), 155° (V)Material ABS plastic housing, stainless steel U bracket & hardwareColor whiteWeight approx. 2.8 kg

1

2

3

4

5

6

4



1

1


¬[-G¢

¬[-H¥

¬[-I¨

¬[-wB

¬[.6O

581238

581239

581240

581286

581321

Flush-Mounted Volume Controller, 5 W



Ceramic Terminal and Thermal Fuse


Flush-Mounted Volume Controller 5 watts, with compulsory relay (24 V DC).



A 3-pin ceramic terminal and a thermal fuse (activation temperature 240°C) provide the necessary protection in order to prevent short-circuiting of the loudspeaker in case of fire and to avoid further damages.

Flush-Mounted Volume Controller 6 watts, with compulsory relay (24 V DC). Fail to save series in which the relay is active during normal operation. GIRA System 55 pure white semi-matt.

Standard Loudspeaker Accessories


Please use a pattress box with a minimum depth of 61 mm.






1

1

1

1

71

¬[.7R

¬[.8U

¬[.>g

581322

581323

581329



Surface-Mounted Box



Surface-mounted box for Part Nos. 581320 to 581323 / GIRA System 55

Standard Loudspeaker Accessories




1

2

3

4

5

6

4






1

1

1


Notes

73

VARIODYN D1 Cabinet System – without Hinged FrameAccessoires

76-77

78-80

19" Rack

1

2

3

4

5

6

VARIODYN D1 Cabinet System – with Hinged Frame

74-75

5


¬[R!X

¬[R!§/S"

¬[R"[

¬[R"§/S%

¬[R#^

¬[R#§/S(

584900

584900.R

584901

584901.R

584902

584902.R

Upright Cabinet with Hinged Frame, 24 HU

Upright Cabinet with Hinged Frame 24 HU, assembled

Upright Cabinet with Hinged Frame, 40 HU

Upright Cabinet with Hinged Frame, 40 HU, assembled

Upright Cabinet with Hinged Frame, 24 HU, 600 mm deep

Upright Cabinet with Hinged Frame, 24 HU, 600 mm deep, assembled

Same as 584900 but includes assembly of the voice alarm components and incidentals.



19" Rack VARIODYN D1 Cabinet System – with Hinged Frame

Delivery contains the basic cabinet elements. All further elements such as doors, side panels, base panels etc. are ordered separately as accessories. Supported by an integrated pivot ball, the cabinet can be opened and closed easily for installation and service even with the fully loaded hinged frame.

The heavy weight of the components such as power output amplifier and UPS was taken into consideration during the development of the VARIODYN D1 Cabinet System and there-fore the carrying capacity of the hinged frame was radically increased.The slight self-weight lowers the transport costs and makes mounting easier.

Approval: G 210122

Accessories584756 Unit tray 3HE/350584757 Unit tray 3HE/500584759 Solid door fan cut-out - alu AKA584760 Acrylic plastic door fan cut-out. AKA584754 Slide-in rail 300

Technical DataMaximum weight load 250 kgType of protection IP 40Color grey, similar to RAL 7035

Technical DataWeight approx. 140 kgInstallation depth 450 mmDimensions W: 800 mm H: 1400 mm D: 800 mm (H: incl. 100 mm base)



Features

• Dismantles completely• Easily replaceable swing frame and door

1

Cables not included in prices!



75

¬[R$a

¬[R$§/S+

¬[R60

¬[R73

Accessories VARIODYN D1 Cabinet System – with Hinged Frame

584903

584903.R

584921

584922

Upright Cabinet with Hinged Frame, 40 HU, 600 mm deep

Upright Cabinet with Hinged Frame, 40 HU, 600 mm deep, assembled

Angled Sliding Rail Set for Hinge Frames, 250 mm deep

Cable Clamping Rail Set, 2 HU


For additional mounting of two stacked power output amplifiers.

19" Rack VARIODYN D1 Cabinet System – with Hinged Frame


1

2

3

4

5

6

5


1

1


¬[R+v

¬[R+§/S@

¬[R,y

¬[R,§/SC

584910

584910.R

584911

584911.R

Upright Cabinet without Hinged Frame, 26 HU

Upright Cabinet without Hinged Frame, 26 HU, assembled

Upright Cabinet without Hinged Frame, 42 HU

Upright Cabinet without Hinged Frame, 42 HU, assembled



19" Rack VARIODYN D1 Cabinet System – without Hinged Frame

The advantage of this cabinet systems lies in the space savings and the manifold configur-ation possibilities in combination with accessibility from the front and the back. Due to the permanently fixed 19” guide rails a significantly higher weight load is possible. Delivery contains the basic elements of the rack.All further elements such as doors, side panels, base panels etc. are ordered separately as accessories. This cabinet system is additionally equipped for a second mounting level which allows for the mounting of components to the front and the back of the cabinet, taking the depth of the components into consideration.The high weight of the components such as power output amplifier and UPS was taken into consideration during the development of the VARIODYN D1 Cabinet System. The slight self-weight lowers the transport costs and makes mounting easier.

Approval: G 210122

Accessories584756 Unit tray 3HE/350584757 Unit tray 3HE/500584759 Solid alu doors fan cut-out AKA584755 Slide-in angle 45*45584760 Acrylic plastic door fan cut-out AKA

Technical DataMaximale Belastung 400 kgType of protection IP 40Color grey, similar to RAL 7035Weight approx. 6200 g

Technical DataWeight approx. 120 kgDimensions W: 800 mm H: 1400 mm D: 800 mm (H: incl. 100 mm base

Technical DataWeight approx. 150 kgDimensions W: 800 mm H: 2100 mm D: 800 mm (H: incl. 100 mm base)

Features

• Replaceable door stop• Dismantles completely

1



77

¬[R86

¬[R;?

¬[R>H

¬[R?K

¬[RBT

584923

584926

584929

584930

584933

Runner, 800 mm

19" Cabinet Light 230V / 11 W

Mounting Chassis Set with Lateral Electrical Perforation

L-Form Cable Binding Strip for Cabinets, 800 mm deep

Wheels for Upright Cabinet with Brake

Sliding rail for supporting heavy (>10 kg) 19" components in upright cabinets.

• 230 V/11 W with mains switch and integrated socket• Optional mounting on cabinet profile or on the 19" plane.• Mounting height 1HU• Includes 3.0 m connection line

19" Rack VARIODYN D1 Cabinet System – without Hinged Frame

Accessories VARIODYN D1Cabinet System – without Hinged Frame

Technical DataLoad capacity 70 kgDimensions H: 70 mm (gesamt)

1

2

3

4

5

6

5

1

Only for upright cabinets without hinged frames (Part No. 584910).

4 pieces

1

1

1


¬[R@N

¬[R:<

¬[RAQ

¬[RF`

¬[RGc

584931

584925

584932

584937

584938

19" 8-way Socket Strip with Switch

Door Contact Switch with Connection Cable for Light

Fan Cartridge, Roof Installation

Document Compartment, 2 HU, RAL 7035

Compartment Floor, 2 HU, RAL 7035

• 16 A/250 V AC• With 8 sockets, 35º rotation• Connection line L= 2 m• Protection against accidental switching• Universal mounting option• Protective contact system CEE7/III

With connecting cable for cabinet light and Wieland plug ST 17/2, completely wired and connection-ready, with mounting material.

Compartment floor for front installation.

19" Rack Accessories

Technical DataMaterial sheet steel 1.5 mColor grey, similar to RAL 7035Dimensions W: 405 mm H: 88 mm D: 75 mm (2 HE, 19")

Technical DataMaterial sheet steel 1.5 mColor grey, similar to RAL 7035Dimensions H: 88 mm D: 250 mm (2 HE)

Includes mounting material.

Includes mounting material.

1

1

1

1

1

Fan cartridge with two fans and thermostat.

Document compartment with cylinder lock and fully extendable telescopic rails, front mounting.

79

¬[RHf

¬[RIi

¬[RKo

¬[F$I

¬[F%L

¬[F&O

¬[F'R

¬[F(U

584939

584940

584942

583703

583704

583705

583706

583707

Connector Set

Equipotential Bonding System

Document Pocket for 19" Upright Cabinet

Mounting Kit 1

Dummy Plate, 1 HU

Dummy Plate, 2 HU

Dummy Plate, 3 HU

Dummy Plate, 4 HU

For connecting cabinets.

Equipotential bonding system with sealable protective cover in compliance with VDE 0609.

Connection options:1 x circular conductor RD 8-10 mm1 x flat-band with width of up to 30 mm or circular conductor RD 8-10 mm7 x single or multistrand conductor up to 25 mm² or fine-wire conductor up to 16 mm²

Document pocket for storing system documentation such as plans, logs, etc. in the upright cabinet.

Cover plate in VARIODYN D1 Design with a height unit to cover free installation space in the standing cabinet.

Cover plate in VARIODYN D1 Design with two height units to cover free installation space in the standing cabinet.

Cover plate in VARIODYN D1 Design with three height units to cover free installation space in the standing cabinet.

Cover plate in VARIODYN D1 Design with four height units to cover free installation space in the standing cabinet.


1

2

3

4

5

6

5

Set (4 pieces) with mounting material.

Each contains 24 cage nuts, screws and washers.

1

1

1

1

1

1

1


¬[F)X

¬[F*[

¬[F+^

¬[RNx

583708

583709

583710

584945

Ventilation Plate, 1 HU

Dummy Plate, 4 HU

Dummy Plate DCSF and DKM, 4 HU

Rollsocket for Rack 800 x 800

Ventilation panel in VARIODYN D1 Design with a height unit to cover free installation space in the standing cabinet.

Dummy plate for installing a fire department digital call station DCSF12 or DCSF1 in the upright cabinet. The dummy plate has a height of 4 HU and features a cut-out for the digital call station and holes for the fastening screws. The fastening screws are supplied.

Cover plate to install 2 DCSF12 or DCSF1 fire brigade call stations in the standing cabinet. The cover plate has a height of 4 HU and 2 sections for the call stations or DKM18. For installing a DKM18 digital button module, the installation kit 583312 and a standard RJ11 cable are required.

Heavy-duty roller base for supporting a standing cabinet without pivoting frame 584910 or 584911. The roller device consists two heavy-duty rails with rollers, which are screwed on the right and left under the standing cabinet. Because of the required stability increases the depth of the cabinet on 120 cm.


Technical DataColor gray, similar to RAL 7035Load capacity 450 kgWeight approx. 11 kg (per rail)Dimensions L: 1200 mm W: 100 mm H: 200 mm (incl. roller, per rail)

Two heavy-duty rails with rollers

1

1

1

1

1

1

81

Part Number Index

Part No. Part No. Part No. Part No.Page Page Page Page 1

2

3

4

5

66

018006 34580212.21 13580214.21 14580222.41 12580231 14580232 15580402 29581201 68581202 66581203 66581205 56581210 56581211 56581212 57581215 67581216 69581218 69581220 62581221 62581222 57581223 58581228 62581231 65581232 65581234 68581237 29581238 70581239 70581240 70581241 58581245 30581249 59581252 63581253 63581254 59581255 60581256 59581257 64581281 66581282 60581283 61581284 61581286 70581316 35

581320 35581321 70581322 71581323 71581329 35, 71581352 30581353 30581354 30581355 31581356 31581357 31581720.VD 32581721 32581730 33581731 34582400 44582401 44582402 45582403 45582404 46582405 46582406 47582420 48582421 48582422 49582424 50582425 50582430 51582431 51582432 52582433 52582440 53582441 53583300.ES 24583301.21 16583302.21 17583303.21 18583304.21 19583305.21 19583306.21 17583307 24583311 24583312 24583315.02 23

583316.21 23583317.21 23583318 24583331.21 27583332 28583341.21 29583342 11583351 28583361.22.ES 8583362.22.ES 9583371.21 25583381.22 26583386.21 36583387.21 36583390 36583391 37583392 37583393 38583401.21 40583422.21 40583451.21 40583452.21 40583471.21 40583472.21 41583473.21 41583476.21 40583477.21 40583481 41583482 41583483 41583486 41583487 41583488 41583489 41583490 41583491 41583492 42583496 35583703 79583704 79583705 79583706 79583707 79583708 80

583709 80583710 80584900 74584900.R 74584901 74584901.R 74584902 74584902.R 74584903 75584903.R 75584910 76584910.R 76584911 76584911.R 76584921 75584922 75584923 77584925 78584926 77584929 77584930 77584931 78584932 78584933 77584937 78584938 78584939 79584940 79584942 79584945 80584960 20584961 20584962 21586102 22586103 22586104 22586115 38772386 39784840.10 39784841.10 39784856 39788606 39805683 33


Index

Keyword KeywordPage Page

AAdhesive Label for DCS "ESSER by Honeywell" 24Angled Sliding Rail Set for Hinge Frames, 250 mm deep 75Audio Connection Line, 1.8 m 42

BBackup Cable RC 22 40Battery 12 V DC / 24 Ah 34Battery for Emergency Power Supply 12 V / 105 Ah 33Battery for Emergency Power Supply 12 V / 150 Ah 34

CCabinet Light 230V / 11 W 77Cable Clamping Rail Set, 2 HU 75Cable for Cabinet Rear Panel DOM4-8 40Cable for Cabinet Rear Panel DOM4-24 40Cat 5 Patch Cable, 1 m blue (DAL) 41Cat 5 Patch Cable, 1 m yellow (Ethernet) 41Cat 5 Patch Cable, 2 m blue (DAL) 41Cat 5 Patch Cable, 2 m yellow (Ethernet) 41Cat 5 Patch Cable, 3 m blue (DAL) 41Cat 5 Patch Cable, 3 m yellow (Ethernet) 41CD Changer DN-C200P 29Ceiling Loudspeaker EDL 06-165/T 59Ceiling Loudspeaker EDL 10-165/T 60Ceiling Loudspeaker EDL 10-165/T plus / 2-ways System 61Ceiling Loudspeaker EDL 20-200/T plus / 2-way System 61Ceiling Loudspeaker EDLBW 06-165/T, impact- resistant 59Ceiling Loudspeaker EVAC 50X 58Ceiling Loudspeaker MC 5 59Ceramic Terminal and Thermal Fuse 70Compartment Floor, 2 HU, RAL 7035 78Connector Set 79Contact Interface Module (CIM) 29Control Cable 12 for UIM 40

DDigital Call Station DCS2 17Digital Call Station DCS15 16Digital Fire Control PA Panel DCSF1 19Digital Fire Control PA Panel DCSF12 18Digital Key Module DKM18 17Digital Output Module DOM4-8 8Digital Output Module DOM4-24 9Document Compartment, 2 HU, RAL 7035 78Document Pocket for 19" Upright Cabinet 79Door Contact Switch with Connection Cable for Light 78

Doormaster Smart PAL Telephone Interface 38Dummy Plate, 1 HU 79Dummy Plate, 2 HU 79Dummy Plate, 3 HU 79Dummy Plate, 4 HU 79, 80Dummy Plate DCSF and DKM, 4 HU 80

EEmergency Power Supply 24 V / 100 A 32Emergency Power Supply 24 V / 150 A 32End-of-Line Module 35Equipotential Bonding System 79essernet Module 62.5kBd 39essernet Module 500kBd 39External Power Supply DCU 2403 33

FFan Cartridge, Roof Installation 78Fiber Optic Conversion for Control Unit 23Fiber Optic Conversion for Digital Communication Units DCS 23FIOS Mounting Kit for Fire Department Digital Call Station DCSF 1/12 20Fire Control PA Panel DCSF 7 19Fire Dome (EF 165) for Ceiling Loudspeakers Part No. 581254 60Flush-mounted Box for DIGI System Table Call Station DIGIST09 22Flush-Mounted Volume Controller, 5 W 70Flush-Mounted Volume Controller, 6 W 70Flush-Mounted Volume Controller, 12 W 71Flush-Mounted Volume Controller, 30 W 70Flush-Mounted Volume Controller, 50 W 71Flush-Mounted Volume Controller, 60 W 70Flush-Mounted XLR Panel Jack 35FM / AM / CD Player 30FM / AM / USB / SD Player 30FO Switch for Ethernet Ring, multimode 37FO Switch for Ethernet Ring, single mode 38

HHorn Loudspeaker DK 10/T EN54 51Horn Loudspeaker DK 15/T EN54 51Horn Loudspeaker DK 30/T EN54 52Horn Loudspeaker DK-MH 30/T plus-EN54 52Horn Loudspeaker HQ15, 15 W, IP66 66Horn Loudspeaker HQ30, 30 W, IP66 66Housing for one Fire Department Digital Call Station DCSF 20Housing for two Fire Department Digital Call Stations DCSF 21Housing Kit 39

83

Index

Keyword KeywordPage Page 1

2

3

4

5

66

IInput Cable DOM Amplifier, 0.5 m green 41Input Cable DOM (as of G2) - Amplifier (G1) 41Input Cable DOM (G1) - Amplifier (as of G2) 41Input Cable DOM (G1) - XV Amplifier (G1) 40Installation Kit for Communication Unit DCS 24Interface Module RS232/V24 39

KKeyboard Cover for VARIODYN D1 DCS Communica-tion Unit 24Key Cap 24

LL-Form Cable Binding Strip for Cabinets, 800 mm deep 77Loop Isolator Module (LIM) 11Loudspeaker Box VIVA-3 302 WT, 15 W, white 69Loudspeaker Box VIVA-3 502 WT, 25 W, white 69

MMains Switching Unit (MSU) 25Master Clock SC 98.47 pro 36Mast Holder EMB 200 66Microphone P4 for AVR 35MMA 240 Mixing Amplifier 30Mounting Chassis Set with Lateral Electrical Perforation 77Mounting Kit 1 79

OOutput Cable 2 Amplifiers - DOM 40Output Cable Amplifier - DOM 40Overvoltage Protection Module for UIM Contacts 28

PPlastic Spherical Loudspeakers SL20M, 20 W, white 67Power Amplifier 2XD250 14Power Amplifier 2XD400 15Power Amplifier 2XH500 12Power Amplifier 2XV200 13Power Amplifier 2XV500 14Power Amplifier 4x120 W / 100 V 30Power Supply for Fiber Optics Converter 23

RRecessed Ceiling Loudspeaker DL 06-130/T-EN54 44Recessed Ceiling Loudspeaker DL 06-165/T-EN54 44Recessed Ceiling Loudspeaker DL 10-165/T plus- EN54 46Recessed Ceiling Loudspeaker DL 10-200/T-EN54 45Recessed Ceiling Loudspeaker DL 20-130/T-EN54 45

Recessed Ceiling Loudspeaker DL 20-200/T plus- EN54 46Recessed Ceiling Loudspeaker DL-AB 06-200/T-EN54 47Recessed Ceiling Loudspeaker EVAC 5, 6 W – with Fire Dome 57Recessed Ceiling Loudspeaker EVAC 6, 10 W - with Fire Dome 58Recessed Ceiling Loudspeaker MC 4TA 56Recessed Ceiling Loudspeaker PC 3, 6 W 56Recessed Ceiling Loudspeaker PC 5T, 10 W 56Recessed Ceiling Loudspeaker PC 8T, 20 W 57Rollsocket for Rack 800 x 800 80Runner, 800 mm 77

SSerial essernet Interface EDP, bidirectional 39Socket Strip with Switch 78Sound Column COM 20, 20 W 68Sound Column COM 40, 40 W 68Sound Projector DA-S 10-130/T EN54 53Sound Projector DA-S 20-130/T EN54 53Sound Projector SP 10, 10 W 65Sound Projector SPM 20, 20 W 65Surface-Mounted Box 35, 71System Communication Unit (SCU) 26

TTable Call Station with DIGIM1 Pregong System 22Table Call Station with DIGIM4 Pregong System 22TALK C1 Condenser Microphone 31TALK D Dynamic Microphone 31TALK ST Table Stand 31Time Control Module GPS (TCM GPS) 36Tuner / CD / MP3 Player MP02 29TWI - RS 232 Adapter 36

UUniversal Interface Module (UIM) 27Upright Cabinet with Hinged Frame, 24 HU 74Upright Cabinet with Hinged Frame, 24 HU, 600 mm deep 74Upright Cabinet with Hinged Frame, 24 HU, 600 mm deep, assembled 74Upright Cabinet with Hinged Frame 24 HU, assembled 74Upright Cabinet with Hinged Frame, 40 HU 74Upright Cabinet with Hinged Frame, 40 HU, 600 mm deep 75Upright Cabinet with Hinged Frame, 40 HU, 600 mm deep, assembled 75


Index

Keyword Page

Upright Cabinet with Hinged Frame, 40 HU, assembled 74Upright Cabinet without Hinged Frame, 26 HU 76Upright Cabinet without Hinged Frame, 26 HU, assembled 76Upright Cabinet without Hinged Frame, 42 HU 76Upright Cabinet without Hinged Frame, 42 HU, assembled 76

VVentilation Plate, 1 HU 80View Control Module (VCM) 28

WWall / Ceiling Loudspeaker EDL A 10-165/T, round 64Wall Flush Mount Speaker WU 06-165/T-EN54 50Wall Jack for Communication Unit DCS 24Wall Surface Mount Speaker DL-A 10-165/T-EN54 49Wall Surface Mount Speaker DL-A 10-200/T-EN54 50Wall Surface Mount Speaker EWA06-165/T, white 63Wall Surface Mount Speaker EWA BW 06-165/T, white - impact-resistant 63Wall Surface Mount Speaker iSpeak 6 62Wall Surface Mount Speaker W3, 3 W, white 62Wall Surface Mount Speaker W10, 10 W, white 62Wall Surface Mount Speaker WA 06-165/T-EN54 48Wall Surface Mount Speaker WA 06-165/T Metal- EN54 48Wall Surface Mount Speaker WA-AB 06-100/T-EN54 49Wheels for Upright Cabinet with Brake 77Wireless Receiver FU 20.00 pro 37

XXLR Cable, Plug - Socket, 1 m 41XLR Cable, Plug - Socket, 10 m 41

Honeywell Life Safety Austria GmbHLemböckgasse 49, 1230 Vienna, AustriaPhone: +43 1 600 60 30 Part No. 054609.AT.G0Fax: +43 1 600 60 30-900 April 2012Internet: www.hls-austria.com Subject to change without noticeE-mail: [email protected] ©2012 Honeywell International Inc.

054609 at G0 VAPA Product Catalog 2012 eBook

Documents

Transcript of 054609 at G0 VAPA Product Catalog 2012 eBook