![Wing Loading: 5.8–6.4 oz/sq ft [17.7–19.5 g/dm2] 674 sq in ...manuals.hobbico.com/gpm/gpma1959-manual-v1_1.pdf · The Sophisticated Lady ARF requires a two-channel radio system](https://static.fdocuments.in/doc/165x107/5e786426fb81f035e80e6f6a/wing-loading-58a64-ozsq-ft-177a195-gdm2-674-sq-in-the-sophisticated.jpg)
0.40 cu.in. displacement 2-stroke€¦ · Wing Span Wing Area Flying Weight Fuselage Length 67 in /...
16
Wing Span Wing Area Flying Weight Fuselage Length 67 in / 1700mm 733 sq in / 47.3 sq dm 5.5-6.2 lbs / 2500-2800g 53 in / 1350mm Warning ! This model is not a toy. It is designed for maximum performance. Please seek advice if one is not familiar with this kind of engine powered precision model. Operating this model without prior preparation may cause injuries. Remember, safety is the most important thing. Always keep this instruction manual at hand for quick reference. 0.40 cu.in. displacement 2-stroke 0.52 cu.in. displacement 4-stroke -0.46 * Specifications are subject to change without notice.* Specifications E A D R - Y T - T S O O - F M L L Y A INSTRUCTION MANUAL Requires: 4-channel w/ standard servos radio 5 ALMOST-READY-TO-FLY (ARF) SERIES MADE IN CHINA FACTORY PRE-FABRICATED The World Models Manufacturing Co., Ltd. www.theworldmodels.com A113FPO25541103 The World Models Manufacturing Co., Ltd. www. theworldmodels . com The World Models Manufacturing Co., Ltd. www. theworldmodels . com The World Models Manufacturing Co., Ltd. www. theworldmodels . com The World Models Manufacturing Co., Ltd. www. theworldmodels . com The World Models Manufacturing Co., Ltd. www. theworldmodels . com The World Models Manufacturing Co., Ltd. www. theworldmodels . com The World Models Manufacturing Co., Ltd. www. theworldmodels . com The World Models Manufacturing Co., Ltd. www. theworldmodels . com The World Models Manufacturing Co., Ltd. www. theworldmodels . com The World Models Manufacturing Co., Ltd. www. theworldmodels . com The World Models Manufacturing Co., Ltd. www. theworldmodels . com The World Models Manufacturing Co., Ltd. www. theworldmodels . com The World Models Manufacturing Co., Ltd. www. theworldmodels . com The World Models Manufacturing Co., Ltd. www. theworldmodels . com The World Models Manufacturing Co., Ltd. www. theworldmodels . com The World Models Manufacturing Co., Ltd. www. theworldmodels . com The World Models Manufacturing Co., Ltd. www. theworldmodels . com The World Models Manufacturing Co., Ltd. www. theworldmodels . com
Transcript of 0.40 cu.in. displacement 2-stroke€¦ · Wing Span Wing Area Flying Weight Fuselage Length 67 in /...
Wing SpanWing AreaFlying WeightFuselage Length
67 in 1700mm733 sq in 473 sq dm55-62 lbs 2500-2800g53 in 1350mm
Warning This model is not a toy It is designed for maximum performance Please seek advice if one is not familiar with this kind
of engine powered precision model Operating this model without prior preparation may cause
injuries Remember safety is the most important thing Always keep this instruction manual at
hand for quick reference
040 cuin displacement 2-stroke052 cuin displacement 4-stroke
-046
Specifications are subject to change without notice
Specifications
E A DR- YT - TS OO - FM LL YA
INSTRUCTION MANUAL
Requires 4-channel w standard servosradio 5
ALMOST-READY-TO-FLY (ARF) SERIESMADE IN CHINA
FACTORY PRE-FABRICATEDThe World ModelsManufacturing Co Ltdwwwtheworldmodelscom
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
INDEX
BEFORE YOU BEGIN
PARTS LIST
ASSEMBLY
SAFETY PRECAUTIONS
P 1
P 2
P 3 - 11
P 11
BEFORE YOU BEGIN
Read through the manual before you begin so you will have an overall idea of what to do
Symbols used throughout this instruction manual comprise of the following -
Check all parts If you find any defective or missing parts contact your local dealer Please DRY FITand check for defects for all parts that will require CA or Epoxy for final assembly Any parts youfind to be defective after the gluing process may be difficult to remove for warranty replacement The manufacturer will replace any defective parts but will not extend to the parts that are good beforegluing to defective parts during assembly Warranty will not cover any parts modified by customer
1
2
3
P1
Do not overlook this symbol
Cut off shaded portionPeel off shaded portioncovering film
Pay close attention here
Pierce the shaded portioncovering film
Must be purchased separately
Drill holes with the specifieddiameter (here 3mm)
Ensure smooth non-bindingmovement while assembling
Apply instant glue(CAglue super glue)
Assemble left and rightsides the same way
Apply epoxy glue
Apply thread locker
Warning
3mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Parts List
P2
TOUGHLON STL100 WHITETOUGHLON 331 CUB YELLOWLIGHTEX SGX201 BLACKLIGHTEX SGX251 SKY BLUELIGHTEX SGX312 BRIGHTE REDLIGHTEX SGX331 CUB YELLOWLIGHTEX SGX350 CORSAIR BLUE
STL
COVERING
1 MAIN WING -- 1 pair
2 WING TUBE Oslash16x296mm -- 1 pc
3 SCREW PB2x16mm -- 4 pcs RING Oslash26mm -- 2 pcs CLEVIS (L) PL4112103 -- 4 pcs STRAPER (L) PL4112102 -- 3 pcs FUEL TUBE Oslash6x5mm -- 7 pcs HORN (L) PL4113101 -- 2 sets PUSHROD Oslash18x105mm w Threads (For Aileron) -- 2 pcs PUSHROD Oslash18x100mm (For Flap) -- 1 set PLYWOOD 3x10x21mm (For Aileron Servo) -- 2 pcs 4 FUSELAGE -- 1 pc STABILIZER amp ELEVATOR -- 1 set
5 SCREW PM3x50mm -- 1 pc SCREW PM3x45mm -- 1 pc WASHER d3xD12mm -- 2 pcs VERTICAL FIN amp RUDDER -- 1 set 6 TAIL LANDING GEAR -- 1 set SCREW PWA23x12mm -- 2 pcs PLATE 5x15mm -- 1 pc 7 FUEL TANK 380cc -- 1 set CABLE TIE (For Fuel Tank) 15x5x400mm -- 1 pc DOUBLE-SIDED TAPE 40x100mm -- 1 pc 8 ENGINE MOUNT PL5111030 -- 1 set SOCKET HEAD SCREW M3x25 -- 4 pcs WASHER d3xD7mm -- 4 pcs
9 FRONT LANDING GEAR -- 1 set FRONT WHEEL Oslash65mm -- 1 pc STEERING ARM Oslash41mm -- 1 set WOOD 6x6x18mm (For Front Landing Gear) -- 1 pc COLLAR Oslash41mm w set screw -- 4 sets 10 MAIN LANDING GEAR -- 1 set SCREW PA3x12mm -- 4 pcs PLATE 12x20mm -- 2 pcs
11 MAIN WHEEL Oslash65mm -- 2 pcs COLLAR Oslash41mm w set screw -- 4 sets
12 SOCKET HEAD SCREW M3x25mm -- 4 pcs WASHER d3xD7mm -- 8 pcs M3 NUT -- 8 pcs SPINNER Oslash57mm PL2111057 -- 1 set ALUMINUM PLATE 1mm -- 1 pc SCREW PM2x10mm -- 4 pcs WASHER d2xD5mm -- 4 pcs M2 NUT -- 4 pcs THROTTLE PUSHWIRE Oslash12x500mm -- 1 pc PLASTIC TUBE d2xD3x350mm -- 1 pc
13 SCREW PB2x12mm -- 2 pcs HORN (L) PL4113101 -- 1 set CLEVIS (L) PL4112103 -- 1 pc FUEL TUBE Oslash6x5mm -- 1 pc PUSHROD Oslash18x765mm w Threads (For Rudder) -- 1 pc
14 SCREW PB2x12mm -- 2 pcs HORN (L) PL4113101 -- 1 set CLEVIS (L) PL4112103 -- 1 pc FUEL TUBE Oslash6x5mm -- 1 pc PUSHROD Oslash18x755mm w Threads (For Elevator) -- 1 pc
15 LINKAGE CONNECTOR Oslash21mm -- 2 sets
16 PLYWOOD 3x40x87mm (For Throttle) -- 1 pc BALSA 7x7x40mm (For Throttle Servo Stand) --2 pcs FUEL TUBE Oslash6x5mm -- 2 pcs STRAPER (L) PL4112102 -- 2 pcs FRONT WHEEL PUSHWIRE Oslash12x450mm -- 1 pc PLASTIC TUBE d2xD3x380mm -- 1 pc PLYWOOD 3x854x95mm (For Fuselage) -- 1 pc PLYWOOD 3x10x21mm (For Fuselage Servo) -- 2 pcs BALSA 6x6x92mm (For Fuselage Servo Stand) -- 2 pcs
17 SPONGE 60x70x90mm -- 1 pc
18 SCREW HM4x30mm -- 2 pcs WASHER d4xD15mm -- 2 pcs PLYWOOD 2x25x115mm (Wing Protection) --1 pc
19 CANOPY -- 1 pc SILICON GROMMET d15xD65mm -- 4 pcs SCREW PWA23x8mm -- 4 pcs 20 DECALSA113FDEC -- 1 set
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P3
1
Aileron Servo3
Main Wing 2
Main Wing
Wing TubeOslash16x296mm
Completed
This step is for one-piece aileron You may follow step 3a if you want to use flaps
1mm
Ring
Plywood3 x 10 x 21mm
15mm
Pre-glued
Straper
Fuel TubeOslash6x5mm
Clevis
Ring
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Aileron amp Flap Servo3a
PB2x16mm Screw
Straper
PB 2x16mmFuel Tube
Oslash6x5mm
Clevis
Oslash18x105mmHorn
If you want to use flaps please follow this step
320mm
Completed
Peel off shaded portioncovering film
Completed
P4
320mm
15mm
15mm
15mm
Clevis
Ring
Straper
Fuel TubeOslash6x5mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P5
Stabilizer amp Elevator4
Bottom View
Vertical Fin amp Rudder5
Tail Landing Gear6If youthis step and 10B
want a tail dragger landing gear follow
PM3x45mm Screw
d3x12mm Washer
PM3x50mm Screw
1
1
2
d3x12mm Washer
PM3x45mm
PM3x50mm
PWA23x12mm ScrewPWA23x12mm
Plate 5x15mm
Use thread locker when tighteningscrews Dont use excessive forceas you are dealing with balsa
Pre-glued
Pre-glued
1mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P6
Front Landing Gear9
4 1 m m C o l l a r4
Engine Mount PL5111030
4
4
M3 x 25mm Socket Head Screw
d3x D7mm Washer
M3 x 25mmSocket Head Screw
d3 x D7mm
Blind nuts are off-centered to keep the spinner at the fuselage axis
Apply thread locker to screws
Engine Mount8
Fuel Tank7
Bottom View
3mm Set Screw
41mm Collar3mm Set Screw
Completed
Wheel Oslash65mm
3mm Set Screw
41mm Collar
Front View6x6x18mm Wood
If youthis step and 10A
want a tricycle landing gear follow
41mm Collar
1 2
3
CABLE TIE15x5x400mm
DOUBLE-SIDED TAPE 40x100mm
Fuel Tank
3
80cc
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P7
10
Engine12
Main Landing Gear
PA3x12mm Screw
11 Main Wheels
41mm Collar
3mm Set Screw
41mm Collar
104mm41in
SpinnerOslash57mm
Installed Engine Position
d3xD7mmWasher
d3xD7mmWasher
M3 Nut
Throttle PushwirePlastic tube
10A
10B
M3x25mm
Aluminum Plate 1mm
PM2x10mmd2xD5mm Washer
SpinnerOslash57mm
M2 NUT
Completed
PM2x10mm Screw
(Tail dragger landing gear)
(Tricycle landing gear)
M3x25mm Socket Head Screw
2mm
32mm
d2xD5mm Washer
d3xD7mm Washer
PA3x12mmPA3x12mm
For No10A
For No10B
Fr ont
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P8
PB2x12mm
Rudder PushrodOslash18x765mm
2mm
Horn
Bottom View
PB2x12mm
2mmHorn
Elevator PushrodOslash18x755mm
Rudder Pushrod13
Oslash1mm pilot holes for World Models horn are pre-drilled Please look for pin-hole marks at under side of control surfaces
Elevator Pushrod14
Oslash1mm pilot holes for World Models horn are pre-drilled Please look for pin-hole marks at under side of control surfaces
Servo Set15
3 x 3mm Set Screw
Linkage Connector
M2 Nut
2mm Washer
1
1
1
2
Please refer to attached sheet for linkage connector installation
Included with the radio Set
Throttl
e Pushwire
3x3mm Set Screw
Throttle Servo2mm
2mm Washer
M2 Nut
2mm Washer
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P9
18 Main Wing
d4xD15mm Washer
HM4x30mmd4xD15mm Washer
Wing Protection2x25x115mm
Install Sponge for inserting Battery and Receiver
PLYWOOD3x40x90mm
Throttle Servo
Elevator Servo
Elevator Pushrod
Rudder Pushrod
Rudder Servo
17 Radio Equipment
Throttle Pushwire
Fuel Tank380cc
Battery Receiver
SPONGE
Servos16
Front
PLYWOOD
3x40x87mmThrottle PushwireOslash12x500mmPlastic Tubed2xD3x380mm
BALSA7x7x40mm
Front Wheel Pushwire Oslash12x450mmPlastic Tube d2xD3x380mm
Fuel Tube Oslash6x5mm
Straper
Rudder Pushrod
Elevator Pushrod
BALSA7x7x40mm
3x854x95mm
PLYWOOD3x10x21mm
BALSA6x6x92mm
Charge ReceptaclesKP0041300
HM4x30mm Screw4mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P10
Wing Setting20
Canopy19
PWA23x8mm Screw
d15xD65mm Silicon Grommet
Silicon Grommetd15xD65mm
21 Control ThrowsRudder
Elevator
Flap
Aileron
21mm
6mm
21mm
14mm
14mm
6mm6mm
Adjust the control throws as shown in the diagram These throws are good for general flying You can adjust according to your personal preference
Adjust the wing and fuselage configuration asshown in the diagrams
1mm PWA23x8mm1mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P11
CG22
90mm354in CG
The ideal CG position is 90mm (354 in) behind the leading edge measured at where the wing meets the fuselage In order to obtain the CG specified add weight to the fuselage or move the battery position Check the CG before flying
First time flyer should never fly by himself herself Assistance from experienced flyer is absolutely necessary
Pre-flight adjustment must be done before flying it is very dangerous to fly a badly pre-adjusted aircraft
is specially designed to be powered by 2 46 or engine using a more powerful engine does not mean better performance In fact over powered engine may cause severe damage and injuries
Make sure the air field is spacious never fly the plane too close to people and never get too close to a running propeller
If you find wrinkles on the covering as a result of weather changes you can use hot iron to remove the wrinkles Please begin with lower temperature setting and gradually raise the temperature until the wrinkles are gone Too hot an iron may damage the covering Dont use hot iron near the seams or edges hot iron will
melt the glue and shrink the covering at the same time causing the seams to pull away
Check and re-tighten up all factory assembled screws use thread locker if necessary
c 040-0 4c 052
Important Safety Precautions
Warning
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
LINKAGE CONNECTOR
HW7111050 amp HW7111060
After fastening the round nut make sure that the linkage connector can rotate freely
Drill 2mm hole at servo hornInsert linkage connectorinto servo horn
Make sure shoulder ofscrew is cleared fromservo hornAdd washer to reduceplay if necessary
Shoulder
Tighten up the round nutagainst the shoulder ApplyCA or permanent threadlocker
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model including
product news and free upgrade parts when applicable Please fill in the following and send to
AirBorne Models 4749-K Bennett Drive Livermore CA 94551 USA
1 Name
2 Address
3 Phone E-mail
4 Model
Wing QC Fuselage QC(QC numbers are stamped on wing and fuselage)
5 Date of Purchase
6 Store Name
Please call AirBorne Models at 925 371 0922 for any assistance in filling this formThank you very much for purchasing our product
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Optional Parts
( ACCESSORIES)
180mm Extension For Park Flyer
KW0011800 180mm 1 set
Code No Size Package
Fuel Filler
PL8110030 15 x 22 x 49mm 1 x 1 pc
Code No Size Package
Charge Receptacles
KP0041300
Code No Size Package
Field Stand
MS9111430 600 x 240 x 310mm 1 pc
Code No Size Package
180mm Y-Cord For Park Flyer
KW0021800 180mm 1 pc
Code No Size Package
For park flyers of small electric models
Clevis Wrench
PL8210010 1 set
Code No Size Package
Small Clevis Large Clevis
Special tool for clevis installationSuitable for standard and small(EP) clevis
Standard ServoCode No SV4031
014 sec 60deg 60VTorque 32kgcm 448 oz - in 48V 41kgcm 574 oz - in 60VSize 406 x 20 x 37mm 160 x 079 x 146 inWeight 394 g 139 oz
Speed 017 sec 60deg 48V
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World Models
w w w t h e w o r l d m o d e l s c o mManufactur ing Co Ltd
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
- 页 1
- 页 2
- 页 3
- 页 4
- 页 5
- 页 6
- 页 7
- 页 8
- 页 9
- 页 10
- 页 11
- 页 12
- 页 13
- 页 14
- 页 15
- 页 16
-
INDEX
BEFORE YOU BEGIN
PARTS LIST
ASSEMBLY
SAFETY PRECAUTIONS
P 1
P 2
P 3 - 11
P 11
BEFORE YOU BEGIN
Read through the manual before you begin so you will have an overall idea of what to do
Symbols used throughout this instruction manual comprise of the following -
Check all parts If you find any defective or missing parts contact your local dealer Please DRY FITand check for defects for all parts that will require CA or Epoxy for final assembly Any parts youfind to be defective after the gluing process may be difficult to remove for warranty replacement The manufacturer will replace any defective parts but will not extend to the parts that are good beforegluing to defective parts during assembly Warranty will not cover any parts modified by customer
1
2
3
P1
Do not overlook this symbol
Cut off shaded portionPeel off shaded portioncovering film
Pay close attention here
Pierce the shaded portioncovering film
Must be purchased separately
Drill holes with the specifieddiameter (here 3mm)
Ensure smooth non-bindingmovement while assembling
Apply instant glue(CAglue super glue)
Assemble left and rightsides the same way
Apply epoxy glue
Apply thread locker
Warning
3mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Parts List
P2
TOUGHLON STL100 WHITETOUGHLON 331 CUB YELLOWLIGHTEX SGX201 BLACKLIGHTEX SGX251 SKY BLUELIGHTEX SGX312 BRIGHTE REDLIGHTEX SGX331 CUB YELLOWLIGHTEX SGX350 CORSAIR BLUE
STL
COVERING
1 MAIN WING -- 1 pair
2 WING TUBE Oslash16x296mm -- 1 pc
3 SCREW PB2x16mm -- 4 pcs RING Oslash26mm -- 2 pcs CLEVIS (L) PL4112103 -- 4 pcs STRAPER (L) PL4112102 -- 3 pcs FUEL TUBE Oslash6x5mm -- 7 pcs HORN (L) PL4113101 -- 2 sets PUSHROD Oslash18x105mm w Threads (For Aileron) -- 2 pcs PUSHROD Oslash18x100mm (For Flap) -- 1 set PLYWOOD 3x10x21mm (For Aileron Servo) -- 2 pcs 4 FUSELAGE -- 1 pc STABILIZER amp ELEVATOR -- 1 set
5 SCREW PM3x50mm -- 1 pc SCREW PM3x45mm -- 1 pc WASHER d3xD12mm -- 2 pcs VERTICAL FIN amp RUDDER -- 1 set 6 TAIL LANDING GEAR -- 1 set SCREW PWA23x12mm -- 2 pcs PLATE 5x15mm -- 1 pc 7 FUEL TANK 380cc -- 1 set CABLE TIE (For Fuel Tank) 15x5x400mm -- 1 pc DOUBLE-SIDED TAPE 40x100mm -- 1 pc 8 ENGINE MOUNT PL5111030 -- 1 set SOCKET HEAD SCREW M3x25 -- 4 pcs WASHER d3xD7mm -- 4 pcs
9 FRONT LANDING GEAR -- 1 set FRONT WHEEL Oslash65mm -- 1 pc STEERING ARM Oslash41mm -- 1 set WOOD 6x6x18mm (For Front Landing Gear) -- 1 pc COLLAR Oslash41mm w set screw -- 4 sets 10 MAIN LANDING GEAR -- 1 set SCREW PA3x12mm -- 4 pcs PLATE 12x20mm -- 2 pcs
11 MAIN WHEEL Oslash65mm -- 2 pcs COLLAR Oslash41mm w set screw -- 4 sets
12 SOCKET HEAD SCREW M3x25mm -- 4 pcs WASHER d3xD7mm -- 8 pcs M3 NUT -- 8 pcs SPINNER Oslash57mm PL2111057 -- 1 set ALUMINUM PLATE 1mm -- 1 pc SCREW PM2x10mm -- 4 pcs WASHER d2xD5mm -- 4 pcs M2 NUT -- 4 pcs THROTTLE PUSHWIRE Oslash12x500mm -- 1 pc PLASTIC TUBE d2xD3x350mm -- 1 pc
13 SCREW PB2x12mm -- 2 pcs HORN (L) PL4113101 -- 1 set CLEVIS (L) PL4112103 -- 1 pc FUEL TUBE Oslash6x5mm -- 1 pc PUSHROD Oslash18x765mm w Threads (For Rudder) -- 1 pc
14 SCREW PB2x12mm -- 2 pcs HORN (L) PL4113101 -- 1 set CLEVIS (L) PL4112103 -- 1 pc FUEL TUBE Oslash6x5mm -- 1 pc PUSHROD Oslash18x755mm w Threads (For Elevator) -- 1 pc
15 LINKAGE CONNECTOR Oslash21mm -- 2 sets
16 PLYWOOD 3x40x87mm (For Throttle) -- 1 pc BALSA 7x7x40mm (For Throttle Servo Stand) --2 pcs FUEL TUBE Oslash6x5mm -- 2 pcs STRAPER (L) PL4112102 -- 2 pcs FRONT WHEEL PUSHWIRE Oslash12x450mm -- 1 pc PLASTIC TUBE d2xD3x380mm -- 1 pc PLYWOOD 3x854x95mm (For Fuselage) -- 1 pc PLYWOOD 3x10x21mm (For Fuselage Servo) -- 2 pcs BALSA 6x6x92mm (For Fuselage Servo Stand) -- 2 pcs
17 SPONGE 60x70x90mm -- 1 pc
18 SCREW HM4x30mm -- 2 pcs WASHER d4xD15mm -- 2 pcs PLYWOOD 2x25x115mm (Wing Protection) --1 pc
19 CANOPY -- 1 pc SILICON GROMMET d15xD65mm -- 4 pcs SCREW PWA23x8mm -- 4 pcs 20 DECALSA113FDEC -- 1 set
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P3
1
Aileron Servo3
Main Wing 2
Main Wing
Wing TubeOslash16x296mm
Completed
This step is for one-piece aileron You may follow step 3a if you want to use flaps
1mm
Ring
Plywood3 x 10 x 21mm
15mm
Pre-glued
Straper
Fuel TubeOslash6x5mm
Clevis
Ring
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Aileron amp Flap Servo3a
PB2x16mm Screw
Straper
PB 2x16mmFuel Tube
Oslash6x5mm
Clevis
Oslash18x105mmHorn
If you want to use flaps please follow this step
320mm
Completed
Peel off shaded portioncovering film
Completed
P4
320mm
15mm
15mm
15mm
Clevis
Ring
Straper
Fuel TubeOslash6x5mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P5
Stabilizer amp Elevator4
Bottom View
Vertical Fin amp Rudder5
Tail Landing Gear6If youthis step and 10B
want a tail dragger landing gear follow
PM3x45mm Screw
d3x12mm Washer
PM3x50mm Screw
1
1
2
d3x12mm Washer
PM3x45mm
PM3x50mm
PWA23x12mm ScrewPWA23x12mm
Plate 5x15mm
Use thread locker when tighteningscrews Dont use excessive forceas you are dealing with balsa
Pre-glued
Pre-glued
1mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P6
Front Landing Gear9
4 1 m m C o l l a r4
Engine Mount PL5111030
4
4
M3 x 25mm Socket Head Screw
d3x D7mm Washer
M3 x 25mmSocket Head Screw
d3 x D7mm
Blind nuts are off-centered to keep the spinner at the fuselage axis
Apply thread locker to screws
Engine Mount8
Fuel Tank7
Bottom View
3mm Set Screw
41mm Collar3mm Set Screw
Completed
Wheel Oslash65mm
3mm Set Screw
41mm Collar
Front View6x6x18mm Wood
If youthis step and 10A
want a tricycle landing gear follow
41mm Collar
1 2
3
CABLE TIE15x5x400mm
DOUBLE-SIDED TAPE 40x100mm
Fuel Tank
3
80cc
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P7
10
Engine12
Main Landing Gear
PA3x12mm Screw
11 Main Wheels
41mm Collar
3mm Set Screw
41mm Collar
104mm41in
SpinnerOslash57mm
Installed Engine Position
d3xD7mmWasher
d3xD7mmWasher
M3 Nut
Throttle PushwirePlastic tube
10A
10B
M3x25mm
Aluminum Plate 1mm
PM2x10mmd2xD5mm Washer
SpinnerOslash57mm
M2 NUT
Completed
PM2x10mm Screw
(Tail dragger landing gear)
(Tricycle landing gear)
M3x25mm Socket Head Screw
2mm
32mm
d2xD5mm Washer
d3xD7mm Washer
PA3x12mmPA3x12mm
For No10A
For No10B
Fr ont
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P8
PB2x12mm
Rudder PushrodOslash18x765mm
2mm
Horn
Bottom View
PB2x12mm
2mmHorn
Elevator PushrodOslash18x755mm
Rudder Pushrod13
Oslash1mm pilot holes for World Models horn are pre-drilled Please look for pin-hole marks at under side of control surfaces
Elevator Pushrod14
Oslash1mm pilot holes for World Models horn are pre-drilled Please look for pin-hole marks at under side of control surfaces
Servo Set15
3 x 3mm Set Screw
Linkage Connector
M2 Nut
2mm Washer
1
1
1
2
Please refer to attached sheet for linkage connector installation
Included with the radio Set
Throttl
e Pushwire
3x3mm Set Screw
Throttle Servo2mm
2mm Washer
M2 Nut
2mm Washer
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P9
18 Main Wing
d4xD15mm Washer
HM4x30mmd4xD15mm Washer
Wing Protection2x25x115mm
Install Sponge for inserting Battery and Receiver
PLYWOOD3x40x90mm
Throttle Servo
Elevator Servo
Elevator Pushrod
Rudder Pushrod
Rudder Servo
17 Radio Equipment
Throttle Pushwire
Fuel Tank380cc
Battery Receiver
SPONGE
Servos16
Front
PLYWOOD
3x40x87mmThrottle PushwireOslash12x500mmPlastic Tubed2xD3x380mm
BALSA7x7x40mm
Front Wheel Pushwire Oslash12x450mmPlastic Tube d2xD3x380mm
Fuel Tube Oslash6x5mm
Straper
Rudder Pushrod
Elevator Pushrod
BALSA7x7x40mm
3x854x95mm
PLYWOOD3x10x21mm
BALSA6x6x92mm
Charge ReceptaclesKP0041300
HM4x30mm Screw4mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P10
Wing Setting20
Canopy19
PWA23x8mm Screw
d15xD65mm Silicon Grommet
Silicon Grommetd15xD65mm
21 Control ThrowsRudder
Elevator
Flap
Aileron
21mm
6mm
21mm
14mm
14mm
6mm6mm
Adjust the control throws as shown in the diagram These throws are good for general flying You can adjust according to your personal preference
Adjust the wing and fuselage configuration asshown in the diagrams
1mm PWA23x8mm1mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P11
CG22
90mm354in CG
The ideal CG position is 90mm (354 in) behind the leading edge measured at where the wing meets the fuselage In order to obtain the CG specified add weight to the fuselage or move the battery position Check the CG before flying
First time flyer should never fly by himself herself Assistance from experienced flyer is absolutely necessary
Pre-flight adjustment must be done before flying it is very dangerous to fly a badly pre-adjusted aircraft
is specially designed to be powered by 2 46 or engine using a more powerful engine does not mean better performance In fact over powered engine may cause severe damage and injuries
Make sure the air field is spacious never fly the plane too close to people and never get too close to a running propeller
If you find wrinkles on the covering as a result of weather changes you can use hot iron to remove the wrinkles Please begin with lower temperature setting and gradually raise the temperature until the wrinkles are gone Too hot an iron may damage the covering Dont use hot iron near the seams or edges hot iron will
melt the glue and shrink the covering at the same time causing the seams to pull away
Check and re-tighten up all factory assembled screws use thread locker if necessary
c 040-0 4c 052
Important Safety Precautions
Warning
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
LINKAGE CONNECTOR
HW7111050 amp HW7111060
After fastening the round nut make sure that the linkage connector can rotate freely
Drill 2mm hole at servo hornInsert linkage connectorinto servo horn
Make sure shoulder ofscrew is cleared fromservo hornAdd washer to reduceplay if necessary
Shoulder
Tighten up the round nutagainst the shoulder ApplyCA or permanent threadlocker
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model including
product news and free upgrade parts when applicable Please fill in the following and send to
AirBorne Models 4749-K Bennett Drive Livermore CA 94551 USA
1 Name
2 Address
3 Phone E-mail
4 Model
Wing QC Fuselage QC(QC numbers are stamped on wing and fuselage)
5 Date of Purchase
6 Store Name
Please call AirBorne Models at 925 371 0922 for any assistance in filling this formThank you very much for purchasing our product
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Optional Parts
( ACCESSORIES)
180mm Extension For Park Flyer
KW0011800 180mm 1 set
Code No Size Package
Fuel Filler
PL8110030 15 x 22 x 49mm 1 x 1 pc
Code No Size Package
Charge Receptacles
KP0041300
Code No Size Package
Field Stand
MS9111430 600 x 240 x 310mm 1 pc
Code No Size Package
180mm Y-Cord For Park Flyer
KW0021800 180mm 1 pc
Code No Size Package
For park flyers of small electric models
Clevis Wrench
PL8210010 1 set
Code No Size Package
Small Clevis Large Clevis
Special tool for clevis installationSuitable for standard and small(EP) clevis
Standard ServoCode No SV4031
014 sec 60deg 60VTorque 32kgcm 448 oz - in 48V 41kgcm 574 oz - in 60VSize 406 x 20 x 37mm 160 x 079 x 146 inWeight 394 g 139 oz
Speed 017 sec 60deg 48V
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World Models
w w w t h e w o r l d m o d e l s c o mManufactur ing Co Ltd
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
- 页 1
- 页 2
- 页 3
- 页 4
- 页 5
- 页 6
- 页 7
- 页 8
- 页 9
- 页 10
- 页 11
- 页 12
- 页 13
- 页 14
- 页 15
- 页 16
-
Parts List
P2
TOUGHLON STL100 WHITETOUGHLON 331 CUB YELLOWLIGHTEX SGX201 BLACKLIGHTEX SGX251 SKY BLUELIGHTEX SGX312 BRIGHTE REDLIGHTEX SGX331 CUB YELLOWLIGHTEX SGX350 CORSAIR BLUE
STL
COVERING
1 MAIN WING -- 1 pair
2 WING TUBE Oslash16x296mm -- 1 pc
3 SCREW PB2x16mm -- 4 pcs RING Oslash26mm -- 2 pcs CLEVIS (L) PL4112103 -- 4 pcs STRAPER (L) PL4112102 -- 3 pcs FUEL TUBE Oslash6x5mm -- 7 pcs HORN (L) PL4113101 -- 2 sets PUSHROD Oslash18x105mm w Threads (For Aileron) -- 2 pcs PUSHROD Oslash18x100mm (For Flap) -- 1 set PLYWOOD 3x10x21mm (For Aileron Servo) -- 2 pcs 4 FUSELAGE -- 1 pc STABILIZER amp ELEVATOR -- 1 set
5 SCREW PM3x50mm -- 1 pc SCREW PM3x45mm -- 1 pc WASHER d3xD12mm -- 2 pcs VERTICAL FIN amp RUDDER -- 1 set 6 TAIL LANDING GEAR -- 1 set SCREW PWA23x12mm -- 2 pcs PLATE 5x15mm -- 1 pc 7 FUEL TANK 380cc -- 1 set CABLE TIE (For Fuel Tank) 15x5x400mm -- 1 pc DOUBLE-SIDED TAPE 40x100mm -- 1 pc 8 ENGINE MOUNT PL5111030 -- 1 set SOCKET HEAD SCREW M3x25 -- 4 pcs WASHER d3xD7mm -- 4 pcs
9 FRONT LANDING GEAR -- 1 set FRONT WHEEL Oslash65mm -- 1 pc STEERING ARM Oslash41mm -- 1 set WOOD 6x6x18mm (For Front Landing Gear) -- 1 pc COLLAR Oslash41mm w set screw -- 4 sets 10 MAIN LANDING GEAR -- 1 set SCREW PA3x12mm -- 4 pcs PLATE 12x20mm -- 2 pcs
11 MAIN WHEEL Oslash65mm -- 2 pcs COLLAR Oslash41mm w set screw -- 4 sets
12 SOCKET HEAD SCREW M3x25mm -- 4 pcs WASHER d3xD7mm -- 8 pcs M3 NUT -- 8 pcs SPINNER Oslash57mm PL2111057 -- 1 set ALUMINUM PLATE 1mm -- 1 pc SCREW PM2x10mm -- 4 pcs WASHER d2xD5mm -- 4 pcs M2 NUT -- 4 pcs THROTTLE PUSHWIRE Oslash12x500mm -- 1 pc PLASTIC TUBE d2xD3x350mm -- 1 pc
13 SCREW PB2x12mm -- 2 pcs HORN (L) PL4113101 -- 1 set CLEVIS (L) PL4112103 -- 1 pc FUEL TUBE Oslash6x5mm -- 1 pc PUSHROD Oslash18x765mm w Threads (For Rudder) -- 1 pc
14 SCREW PB2x12mm -- 2 pcs HORN (L) PL4113101 -- 1 set CLEVIS (L) PL4112103 -- 1 pc FUEL TUBE Oslash6x5mm -- 1 pc PUSHROD Oslash18x755mm w Threads (For Elevator) -- 1 pc
15 LINKAGE CONNECTOR Oslash21mm -- 2 sets
16 PLYWOOD 3x40x87mm (For Throttle) -- 1 pc BALSA 7x7x40mm (For Throttle Servo Stand) --2 pcs FUEL TUBE Oslash6x5mm -- 2 pcs STRAPER (L) PL4112102 -- 2 pcs FRONT WHEEL PUSHWIRE Oslash12x450mm -- 1 pc PLASTIC TUBE d2xD3x380mm -- 1 pc PLYWOOD 3x854x95mm (For Fuselage) -- 1 pc PLYWOOD 3x10x21mm (For Fuselage Servo) -- 2 pcs BALSA 6x6x92mm (For Fuselage Servo Stand) -- 2 pcs
17 SPONGE 60x70x90mm -- 1 pc
18 SCREW HM4x30mm -- 2 pcs WASHER d4xD15mm -- 2 pcs PLYWOOD 2x25x115mm (Wing Protection) --1 pc
19 CANOPY -- 1 pc SILICON GROMMET d15xD65mm -- 4 pcs SCREW PWA23x8mm -- 4 pcs 20 DECALSA113FDEC -- 1 set
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P3
1
Aileron Servo3
Main Wing 2
Main Wing
Wing TubeOslash16x296mm
Completed
This step is for one-piece aileron You may follow step 3a if you want to use flaps
1mm
Ring
Plywood3 x 10 x 21mm
15mm
Pre-glued
Straper
Fuel TubeOslash6x5mm
Clevis
Ring
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Aileron amp Flap Servo3a
PB2x16mm Screw
Straper
PB 2x16mmFuel Tube
Oslash6x5mm
Clevis
Oslash18x105mmHorn
If you want to use flaps please follow this step
320mm
Completed
Peel off shaded portioncovering film
Completed
P4
320mm
15mm
15mm
15mm
Clevis
Ring
Straper
Fuel TubeOslash6x5mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P5
Stabilizer amp Elevator4
Bottom View
Vertical Fin amp Rudder5
Tail Landing Gear6If youthis step and 10B
want a tail dragger landing gear follow
PM3x45mm Screw
d3x12mm Washer
PM3x50mm Screw
1
1
2
d3x12mm Washer
PM3x45mm
PM3x50mm
PWA23x12mm ScrewPWA23x12mm
Plate 5x15mm
Use thread locker when tighteningscrews Dont use excessive forceas you are dealing with balsa
Pre-glued
Pre-glued
1mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P6
Front Landing Gear9
4 1 m m C o l l a r4
Engine Mount PL5111030
4
4
M3 x 25mm Socket Head Screw
d3x D7mm Washer
M3 x 25mmSocket Head Screw
d3 x D7mm
Blind nuts are off-centered to keep the spinner at the fuselage axis
Apply thread locker to screws
Engine Mount8
Fuel Tank7
Bottom View
3mm Set Screw
41mm Collar3mm Set Screw
Completed
Wheel Oslash65mm
3mm Set Screw
41mm Collar
Front View6x6x18mm Wood
If youthis step and 10A
want a tricycle landing gear follow
41mm Collar
1 2
3
CABLE TIE15x5x400mm
DOUBLE-SIDED TAPE 40x100mm
Fuel Tank
3
80cc
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P7
10
Engine12
Main Landing Gear
PA3x12mm Screw
11 Main Wheels
41mm Collar
3mm Set Screw
41mm Collar
104mm41in
SpinnerOslash57mm
Installed Engine Position
d3xD7mmWasher
d3xD7mmWasher
M3 Nut
Throttle PushwirePlastic tube
10A
10B
M3x25mm
Aluminum Plate 1mm
PM2x10mmd2xD5mm Washer
SpinnerOslash57mm
M2 NUT
Completed
PM2x10mm Screw
(Tail dragger landing gear)
(Tricycle landing gear)
M3x25mm Socket Head Screw
2mm
32mm
d2xD5mm Washer
d3xD7mm Washer
PA3x12mmPA3x12mm
For No10A
For No10B
Fr ont
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P8
PB2x12mm
Rudder PushrodOslash18x765mm
2mm
Horn
Bottom View
PB2x12mm
2mmHorn
Elevator PushrodOslash18x755mm
Rudder Pushrod13
Oslash1mm pilot holes for World Models horn are pre-drilled Please look for pin-hole marks at under side of control surfaces
Elevator Pushrod14
Oslash1mm pilot holes for World Models horn are pre-drilled Please look for pin-hole marks at under side of control surfaces
Servo Set15
3 x 3mm Set Screw
Linkage Connector
M2 Nut
2mm Washer
1
1
1
2
Please refer to attached sheet for linkage connector installation
Included with the radio Set
Throttl
e Pushwire
3x3mm Set Screw
Throttle Servo2mm
2mm Washer
M2 Nut
2mm Washer
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P9
18 Main Wing
d4xD15mm Washer
HM4x30mmd4xD15mm Washer
Wing Protection2x25x115mm
Install Sponge for inserting Battery and Receiver
PLYWOOD3x40x90mm
Throttle Servo
Elevator Servo
Elevator Pushrod
Rudder Pushrod
Rudder Servo
17 Radio Equipment
Throttle Pushwire
Fuel Tank380cc
Battery Receiver
SPONGE
Servos16
Front
PLYWOOD
3x40x87mmThrottle PushwireOslash12x500mmPlastic Tubed2xD3x380mm
BALSA7x7x40mm
Front Wheel Pushwire Oslash12x450mmPlastic Tube d2xD3x380mm
Fuel Tube Oslash6x5mm
Straper
Rudder Pushrod
Elevator Pushrod
BALSA7x7x40mm
3x854x95mm
PLYWOOD3x10x21mm
BALSA6x6x92mm
Charge ReceptaclesKP0041300
HM4x30mm Screw4mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P10
Wing Setting20
Canopy19
PWA23x8mm Screw
d15xD65mm Silicon Grommet
Silicon Grommetd15xD65mm
21 Control ThrowsRudder
Elevator
Flap
Aileron
21mm
6mm
21mm
14mm
14mm
6mm6mm
Adjust the control throws as shown in the diagram These throws are good for general flying You can adjust according to your personal preference
Adjust the wing and fuselage configuration asshown in the diagrams
1mm PWA23x8mm1mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P11
CG22
90mm354in CG
The ideal CG position is 90mm (354 in) behind the leading edge measured at where the wing meets the fuselage In order to obtain the CG specified add weight to the fuselage or move the battery position Check the CG before flying
First time flyer should never fly by himself herself Assistance from experienced flyer is absolutely necessary
Pre-flight adjustment must be done before flying it is very dangerous to fly a badly pre-adjusted aircraft
is specially designed to be powered by 2 46 or engine using a more powerful engine does not mean better performance In fact over powered engine may cause severe damage and injuries
Make sure the air field is spacious never fly the plane too close to people and never get too close to a running propeller
If you find wrinkles on the covering as a result of weather changes you can use hot iron to remove the wrinkles Please begin with lower temperature setting and gradually raise the temperature until the wrinkles are gone Too hot an iron may damage the covering Dont use hot iron near the seams or edges hot iron will
melt the glue and shrink the covering at the same time causing the seams to pull away
Check and re-tighten up all factory assembled screws use thread locker if necessary
c 040-0 4c 052
Important Safety Precautions
Warning
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
LINKAGE CONNECTOR
HW7111050 amp HW7111060
After fastening the round nut make sure that the linkage connector can rotate freely
Drill 2mm hole at servo hornInsert linkage connectorinto servo horn
Make sure shoulder ofscrew is cleared fromservo hornAdd washer to reduceplay if necessary
Shoulder
Tighten up the round nutagainst the shoulder ApplyCA or permanent threadlocker
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model including
product news and free upgrade parts when applicable Please fill in the following and send to
AirBorne Models 4749-K Bennett Drive Livermore CA 94551 USA
1 Name
2 Address
3 Phone E-mail
4 Model
Wing QC Fuselage QC(QC numbers are stamped on wing and fuselage)
5 Date of Purchase
6 Store Name
Please call AirBorne Models at 925 371 0922 for any assistance in filling this formThank you very much for purchasing our product
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Optional Parts
( ACCESSORIES)
180mm Extension For Park Flyer
KW0011800 180mm 1 set
Code No Size Package
Fuel Filler
PL8110030 15 x 22 x 49mm 1 x 1 pc
Code No Size Package
Charge Receptacles
KP0041300
Code No Size Package
Field Stand
MS9111430 600 x 240 x 310mm 1 pc
Code No Size Package
180mm Y-Cord For Park Flyer
KW0021800 180mm 1 pc
Code No Size Package
For park flyers of small electric models
Clevis Wrench
PL8210010 1 set
Code No Size Package
Small Clevis Large Clevis
Special tool for clevis installationSuitable for standard and small(EP) clevis
Standard ServoCode No SV4031
014 sec 60deg 60VTorque 32kgcm 448 oz - in 48V 41kgcm 574 oz - in 60VSize 406 x 20 x 37mm 160 x 079 x 146 inWeight 394 g 139 oz
Speed 017 sec 60deg 48V
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World Models
w w w t h e w o r l d m o d e l s c o mManufactur ing Co Ltd
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
- 页 1
- 页 2
- 页 3
- 页 4
- 页 5
- 页 6
- 页 7
- 页 8
- 页 9
- 页 10
- 页 11
- 页 12
- 页 13
- 页 14
- 页 15
- 页 16
-
P3
1
Aileron Servo3
Main Wing 2
Main Wing
Wing TubeOslash16x296mm
Completed
This step is for one-piece aileron You may follow step 3a if you want to use flaps
1mm
Ring
Plywood3 x 10 x 21mm
15mm
Pre-glued
Straper
Fuel TubeOslash6x5mm
Clevis
Ring
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Aileron amp Flap Servo3a
PB2x16mm Screw
Straper
PB 2x16mmFuel Tube
Oslash6x5mm
Clevis
Oslash18x105mmHorn
If you want to use flaps please follow this step
320mm
Completed
Peel off shaded portioncovering film
Completed
P4
320mm
15mm
15mm
15mm
Clevis
Ring
Straper
Fuel TubeOslash6x5mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P5
Stabilizer amp Elevator4
Bottom View
Vertical Fin amp Rudder5
Tail Landing Gear6If youthis step and 10B
want a tail dragger landing gear follow
PM3x45mm Screw
d3x12mm Washer
PM3x50mm Screw
1
1
2
d3x12mm Washer
PM3x45mm
PM3x50mm
PWA23x12mm ScrewPWA23x12mm
Plate 5x15mm
Use thread locker when tighteningscrews Dont use excessive forceas you are dealing with balsa
Pre-glued
Pre-glued
1mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P6
Front Landing Gear9
4 1 m m C o l l a r4
Engine Mount PL5111030
4
4
M3 x 25mm Socket Head Screw
d3x D7mm Washer
M3 x 25mmSocket Head Screw
d3 x D7mm
Blind nuts are off-centered to keep the spinner at the fuselage axis
Apply thread locker to screws
Engine Mount8
Fuel Tank7
Bottom View
3mm Set Screw
41mm Collar3mm Set Screw
Completed
Wheel Oslash65mm
3mm Set Screw
41mm Collar
Front View6x6x18mm Wood
If youthis step and 10A
want a tricycle landing gear follow
41mm Collar
1 2
3
CABLE TIE15x5x400mm
DOUBLE-SIDED TAPE 40x100mm
Fuel Tank
3
80cc
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P7
10
Engine12
Main Landing Gear
PA3x12mm Screw
11 Main Wheels
41mm Collar
3mm Set Screw
41mm Collar
104mm41in
SpinnerOslash57mm
Installed Engine Position
d3xD7mmWasher
d3xD7mmWasher
M3 Nut
Throttle PushwirePlastic tube
10A
10B
M3x25mm
Aluminum Plate 1mm
PM2x10mmd2xD5mm Washer
SpinnerOslash57mm
M2 NUT
Completed
PM2x10mm Screw
(Tail dragger landing gear)
(Tricycle landing gear)
M3x25mm Socket Head Screw
2mm
32mm
d2xD5mm Washer
d3xD7mm Washer
PA3x12mmPA3x12mm
For No10A
For No10B
Fr ont
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P8
PB2x12mm
Rudder PushrodOslash18x765mm
2mm
Horn
Bottom View
PB2x12mm
2mmHorn
Elevator PushrodOslash18x755mm
Rudder Pushrod13
Oslash1mm pilot holes for World Models horn are pre-drilled Please look for pin-hole marks at under side of control surfaces
Elevator Pushrod14
Oslash1mm pilot holes for World Models horn are pre-drilled Please look for pin-hole marks at under side of control surfaces
Servo Set15
3 x 3mm Set Screw
Linkage Connector
M2 Nut
2mm Washer
1
1
1
2
Please refer to attached sheet for linkage connector installation
Included with the radio Set
Throttl
e Pushwire
3x3mm Set Screw
Throttle Servo2mm
2mm Washer
M2 Nut
2mm Washer
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P9
18 Main Wing
d4xD15mm Washer
HM4x30mmd4xD15mm Washer
Wing Protection2x25x115mm
Install Sponge for inserting Battery and Receiver
PLYWOOD3x40x90mm
Throttle Servo
Elevator Servo
Elevator Pushrod
Rudder Pushrod
Rudder Servo
17 Radio Equipment
Throttle Pushwire
Fuel Tank380cc
Battery Receiver
SPONGE
Servos16
Front
PLYWOOD
3x40x87mmThrottle PushwireOslash12x500mmPlastic Tubed2xD3x380mm
BALSA7x7x40mm
Front Wheel Pushwire Oslash12x450mmPlastic Tube d2xD3x380mm
Fuel Tube Oslash6x5mm
Straper
Rudder Pushrod
Elevator Pushrod
BALSA7x7x40mm
3x854x95mm
PLYWOOD3x10x21mm
BALSA6x6x92mm
Charge ReceptaclesKP0041300
HM4x30mm Screw4mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P10
Wing Setting20
Canopy19
PWA23x8mm Screw
d15xD65mm Silicon Grommet
Silicon Grommetd15xD65mm
21 Control ThrowsRudder
Elevator
Flap
Aileron
21mm
6mm
21mm
14mm
14mm
6mm6mm
Adjust the control throws as shown in the diagram These throws are good for general flying You can adjust according to your personal preference
Adjust the wing and fuselage configuration asshown in the diagrams
1mm PWA23x8mm1mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P11
CG22
90mm354in CG
The ideal CG position is 90mm (354 in) behind the leading edge measured at where the wing meets the fuselage In order to obtain the CG specified add weight to the fuselage or move the battery position Check the CG before flying
First time flyer should never fly by himself herself Assistance from experienced flyer is absolutely necessary
Pre-flight adjustment must be done before flying it is very dangerous to fly a badly pre-adjusted aircraft
is specially designed to be powered by 2 46 or engine using a more powerful engine does not mean better performance In fact over powered engine may cause severe damage and injuries
Make sure the air field is spacious never fly the plane too close to people and never get too close to a running propeller
If you find wrinkles on the covering as a result of weather changes you can use hot iron to remove the wrinkles Please begin with lower temperature setting and gradually raise the temperature until the wrinkles are gone Too hot an iron may damage the covering Dont use hot iron near the seams or edges hot iron will
melt the glue and shrink the covering at the same time causing the seams to pull away
Check and re-tighten up all factory assembled screws use thread locker if necessary
c 040-0 4c 052
Important Safety Precautions
Warning
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
LINKAGE CONNECTOR
HW7111050 amp HW7111060
After fastening the round nut make sure that the linkage connector can rotate freely
Drill 2mm hole at servo hornInsert linkage connectorinto servo horn
Make sure shoulder ofscrew is cleared fromservo hornAdd washer to reduceplay if necessary
Shoulder
Tighten up the round nutagainst the shoulder ApplyCA or permanent threadlocker
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model including
product news and free upgrade parts when applicable Please fill in the following and send to
AirBorne Models 4749-K Bennett Drive Livermore CA 94551 USA
1 Name
2 Address
3 Phone E-mail
4 Model
Wing QC Fuselage QC(QC numbers are stamped on wing and fuselage)
5 Date of Purchase
6 Store Name
Please call AirBorne Models at 925 371 0922 for any assistance in filling this formThank you very much for purchasing our product
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Optional Parts
( ACCESSORIES)
180mm Extension For Park Flyer
KW0011800 180mm 1 set
Code No Size Package
Fuel Filler
PL8110030 15 x 22 x 49mm 1 x 1 pc
Code No Size Package
Charge Receptacles
KP0041300
Code No Size Package
Field Stand
MS9111430 600 x 240 x 310mm 1 pc
Code No Size Package
180mm Y-Cord For Park Flyer
KW0021800 180mm 1 pc
Code No Size Package
For park flyers of small electric models
Clevis Wrench
PL8210010 1 set
Code No Size Package
Small Clevis Large Clevis
Special tool for clevis installationSuitable for standard and small(EP) clevis
Standard ServoCode No SV4031
014 sec 60deg 60VTorque 32kgcm 448 oz - in 48V 41kgcm 574 oz - in 60VSize 406 x 20 x 37mm 160 x 079 x 146 inWeight 394 g 139 oz
Speed 017 sec 60deg 48V
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World Models
w w w t h e w o r l d m o d e l s c o mManufactur ing Co Ltd
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
- 页 1
- 页 2
- 页 3
- 页 4
- 页 5
- 页 6
- 页 7
- 页 8
- 页 9
- 页 10
- 页 11
- 页 12
- 页 13
- 页 14
- 页 15
- 页 16
-
Aileron amp Flap Servo3a
PB2x16mm Screw
Straper
PB 2x16mmFuel Tube
Oslash6x5mm
Clevis
Oslash18x105mmHorn
If you want to use flaps please follow this step
320mm
Completed
Peel off shaded portioncovering film
Completed
P4
320mm
15mm
15mm
15mm
Clevis
Ring
Straper
Fuel TubeOslash6x5mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P5
Stabilizer amp Elevator4
Bottom View
Vertical Fin amp Rudder5
Tail Landing Gear6If youthis step and 10B
want a tail dragger landing gear follow
PM3x45mm Screw
d3x12mm Washer
PM3x50mm Screw
1
1
2
d3x12mm Washer
PM3x45mm
PM3x50mm
PWA23x12mm ScrewPWA23x12mm
Plate 5x15mm
Use thread locker when tighteningscrews Dont use excessive forceas you are dealing with balsa
Pre-glued
Pre-glued
1mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P6
Front Landing Gear9
4 1 m m C o l l a r4
Engine Mount PL5111030
4
4
M3 x 25mm Socket Head Screw
d3x D7mm Washer
M3 x 25mmSocket Head Screw
d3 x D7mm
Blind nuts are off-centered to keep the spinner at the fuselage axis
Apply thread locker to screws
Engine Mount8
Fuel Tank7
Bottom View
3mm Set Screw
41mm Collar3mm Set Screw
Completed
Wheel Oslash65mm
3mm Set Screw
41mm Collar
Front View6x6x18mm Wood
If youthis step and 10A
want a tricycle landing gear follow
41mm Collar
1 2
3
CABLE TIE15x5x400mm
DOUBLE-SIDED TAPE 40x100mm
Fuel Tank
3
80cc
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P7
10
Engine12
Main Landing Gear
PA3x12mm Screw
11 Main Wheels
41mm Collar
3mm Set Screw
41mm Collar
104mm41in
SpinnerOslash57mm
Installed Engine Position
d3xD7mmWasher
d3xD7mmWasher
M3 Nut
Throttle PushwirePlastic tube
10A
10B
M3x25mm
Aluminum Plate 1mm
PM2x10mmd2xD5mm Washer
SpinnerOslash57mm
M2 NUT
Completed
PM2x10mm Screw
(Tail dragger landing gear)
(Tricycle landing gear)
M3x25mm Socket Head Screw
2mm
32mm
d2xD5mm Washer
d3xD7mm Washer
PA3x12mmPA3x12mm
For No10A
For No10B
Fr ont
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P8
PB2x12mm
Rudder PushrodOslash18x765mm
2mm
Horn
Bottom View
PB2x12mm
2mmHorn
Elevator PushrodOslash18x755mm
Rudder Pushrod13
Oslash1mm pilot holes for World Models horn are pre-drilled Please look for pin-hole marks at under side of control surfaces
Elevator Pushrod14
Oslash1mm pilot holes for World Models horn are pre-drilled Please look for pin-hole marks at under side of control surfaces
Servo Set15
3 x 3mm Set Screw
Linkage Connector
M2 Nut
2mm Washer
1
1
1
2
Please refer to attached sheet for linkage connector installation
Included with the radio Set
Throttl
e Pushwire
3x3mm Set Screw
Throttle Servo2mm
2mm Washer
M2 Nut
2mm Washer
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P9
18 Main Wing
d4xD15mm Washer
HM4x30mmd4xD15mm Washer
Wing Protection2x25x115mm
Install Sponge for inserting Battery and Receiver
PLYWOOD3x40x90mm
Throttle Servo
Elevator Servo
Elevator Pushrod
Rudder Pushrod
Rudder Servo
17 Radio Equipment
Throttle Pushwire
Fuel Tank380cc
Battery Receiver
SPONGE
Servos16
Front
PLYWOOD
3x40x87mmThrottle PushwireOslash12x500mmPlastic Tubed2xD3x380mm
BALSA7x7x40mm
Front Wheel Pushwire Oslash12x450mmPlastic Tube d2xD3x380mm
Fuel Tube Oslash6x5mm
Straper
Rudder Pushrod
Elevator Pushrod
BALSA7x7x40mm
3x854x95mm
PLYWOOD3x10x21mm
BALSA6x6x92mm
Charge ReceptaclesKP0041300
HM4x30mm Screw4mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P10
Wing Setting20
Canopy19
PWA23x8mm Screw
d15xD65mm Silicon Grommet
Silicon Grommetd15xD65mm
21 Control ThrowsRudder
Elevator
Flap
Aileron
21mm
6mm
21mm
14mm
14mm
6mm6mm
Adjust the control throws as shown in the diagram These throws are good for general flying You can adjust according to your personal preference
Adjust the wing and fuselage configuration asshown in the diagrams
1mm PWA23x8mm1mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P11
CG22
90mm354in CG
The ideal CG position is 90mm (354 in) behind the leading edge measured at where the wing meets the fuselage In order to obtain the CG specified add weight to the fuselage or move the battery position Check the CG before flying
First time flyer should never fly by himself herself Assistance from experienced flyer is absolutely necessary
Pre-flight adjustment must be done before flying it is very dangerous to fly a badly pre-adjusted aircraft
is specially designed to be powered by 2 46 or engine using a more powerful engine does not mean better performance In fact over powered engine may cause severe damage and injuries
Make sure the air field is spacious never fly the plane too close to people and never get too close to a running propeller
If you find wrinkles on the covering as a result of weather changes you can use hot iron to remove the wrinkles Please begin with lower temperature setting and gradually raise the temperature until the wrinkles are gone Too hot an iron may damage the covering Dont use hot iron near the seams or edges hot iron will
melt the glue and shrink the covering at the same time causing the seams to pull away
Check and re-tighten up all factory assembled screws use thread locker if necessary
c 040-0 4c 052
Important Safety Precautions
Warning
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
LINKAGE CONNECTOR
HW7111050 amp HW7111060
After fastening the round nut make sure that the linkage connector can rotate freely
Drill 2mm hole at servo hornInsert linkage connectorinto servo horn
Make sure shoulder ofscrew is cleared fromservo hornAdd washer to reduceplay if necessary
Shoulder
Tighten up the round nutagainst the shoulder ApplyCA or permanent threadlocker
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model including
product news and free upgrade parts when applicable Please fill in the following and send to
AirBorne Models 4749-K Bennett Drive Livermore CA 94551 USA
1 Name
2 Address
3 Phone E-mail
4 Model
Wing QC Fuselage QC(QC numbers are stamped on wing and fuselage)
5 Date of Purchase
6 Store Name
Please call AirBorne Models at 925 371 0922 for any assistance in filling this formThank you very much for purchasing our product
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Optional Parts
( ACCESSORIES)
180mm Extension For Park Flyer
KW0011800 180mm 1 set
Code No Size Package
Fuel Filler
PL8110030 15 x 22 x 49mm 1 x 1 pc
Code No Size Package
Charge Receptacles
KP0041300
Code No Size Package
Field Stand
MS9111430 600 x 240 x 310mm 1 pc
Code No Size Package
180mm Y-Cord For Park Flyer
KW0021800 180mm 1 pc
Code No Size Package
For park flyers of small electric models
Clevis Wrench
PL8210010 1 set
Code No Size Package
Small Clevis Large Clevis
Special tool for clevis installationSuitable for standard and small(EP) clevis
Standard ServoCode No SV4031
014 sec 60deg 60VTorque 32kgcm 448 oz - in 48V 41kgcm 574 oz - in 60VSize 406 x 20 x 37mm 160 x 079 x 146 inWeight 394 g 139 oz
Speed 017 sec 60deg 48V
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World Models
w w w t h e w o r l d m o d e l s c o mManufactur ing Co Ltd
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
- 页 1
- 页 2
- 页 3
- 页 4
- 页 5
- 页 6
- 页 7
- 页 8
- 页 9
- 页 10
- 页 11
- 页 12
- 页 13
- 页 14
- 页 15
- 页 16
-
P5
Stabilizer amp Elevator4
Bottom View
Vertical Fin amp Rudder5
Tail Landing Gear6If youthis step and 10B
want a tail dragger landing gear follow
PM3x45mm Screw
d3x12mm Washer
PM3x50mm Screw
1
1
2
d3x12mm Washer
PM3x45mm
PM3x50mm
PWA23x12mm ScrewPWA23x12mm
Plate 5x15mm
Use thread locker when tighteningscrews Dont use excessive forceas you are dealing with balsa
Pre-glued
Pre-glued
1mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P6
Front Landing Gear9
4 1 m m C o l l a r4
Engine Mount PL5111030
4
4
M3 x 25mm Socket Head Screw
d3x D7mm Washer
M3 x 25mmSocket Head Screw
d3 x D7mm
Blind nuts are off-centered to keep the spinner at the fuselage axis
Apply thread locker to screws
Engine Mount8
Fuel Tank7
Bottom View
3mm Set Screw
41mm Collar3mm Set Screw
Completed
Wheel Oslash65mm
3mm Set Screw
41mm Collar
Front View6x6x18mm Wood
If youthis step and 10A
want a tricycle landing gear follow
41mm Collar
1 2
3
CABLE TIE15x5x400mm
DOUBLE-SIDED TAPE 40x100mm
Fuel Tank
3
80cc
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P7
10
Engine12
Main Landing Gear
PA3x12mm Screw
11 Main Wheels
41mm Collar
3mm Set Screw
41mm Collar
104mm41in
SpinnerOslash57mm
Installed Engine Position
d3xD7mmWasher
d3xD7mmWasher
M3 Nut
Throttle PushwirePlastic tube
10A
10B
M3x25mm
Aluminum Plate 1mm
PM2x10mmd2xD5mm Washer
SpinnerOslash57mm
M2 NUT
Completed
PM2x10mm Screw
(Tail dragger landing gear)
(Tricycle landing gear)
M3x25mm Socket Head Screw
2mm
32mm
d2xD5mm Washer
d3xD7mm Washer
PA3x12mmPA3x12mm
For No10A
For No10B
Fr ont
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P8
PB2x12mm
Rudder PushrodOslash18x765mm
2mm
Horn
Bottom View
PB2x12mm
2mmHorn
Elevator PushrodOslash18x755mm
Rudder Pushrod13
Oslash1mm pilot holes for World Models horn are pre-drilled Please look for pin-hole marks at under side of control surfaces
Elevator Pushrod14
Oslash1mm pilot holes for World Models horn are pre-drilled Please look for pin-hole marks at under side of control surfaces
Servo Set15
3 x 3mm Set Screw
Linkage Connector
M2 Nut
2mm Washer
1
1
1
2
Please refer to attached sheet for linkage connector installation
Included with the radio Set
Throttl
e Pushwire
3x3mm Set Screw
Throttle Servo2mm
2mm Washer
M2 Nut
2mm Washer
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P9
18 Main Wing
d4xD15mm Washer
HM4x30mmd4xD15mm Washer
Wing Protection2x25x115mm
Install Sponge for inserting Battery and Receiver
PLYWOOD3x40x90mm
Throttle Servo
Elevator Servo
Elevator Pushrod
Rudder Pushrod
Rudder Servo
17 Radio Equipment
Throttle Pushwire
Fuel Tank380cc
Battery Receiver
SPONGE
Servos16
Front
PLYWOOD
3x40x87mmThrottle PushwireOslash12x500mmPlastic Tubed2xD3x380mm
BALSA7x7x40mm
Front Wheel Pushwire Oslash12x450mmPlastic Tube d2xD3x380mm
Fuel Tube Oslash6x5mm
Straper
Rudder Pushrod
Elevator Pushrod
BALSA7x7x40mm
3x854x95mm
PLYWOOD3x10x21mm
BALSA6x6x92mm
Charge ReceptaclesKP0041300
HM4x30mm Screw4mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P10
Wing Setting20
Canopy19
PWA23x8mm Screw
d15xD65mm Silicon Grommet
Silicon Grommetd15xD65mm
21 Control ThrowsRudder
Elevator
Flap
Aileron
21mm
6mm
21mm
14mm
14mm
6mm6mm
Adjust the control throws as shown in the diagram These throws are good for general flying You can adjust according to your personal preference
Adjust the wing and fuselage configuration asshown in the diagrams
1mm PWA23x8mm1mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P11
CG22
90mm354in CG
The ideal CG position is 90mm (354 in) behind the leading edge measured at where the wing meets the fuselage In order to obtain the CG specified add weight to the fuselage or move the battery position Check the CG before flying
First time flyer should never fly by himself herself Assistance from experienced flyer is absolutely necessary
Pre-flight adjustment must be done before flying it is very dangerous to fly a badly pre-adjusted aircraft
is specially designed to be powered by 2 46 or engine using a more powerful engine does not mean better performance In fact over powered engine may cause severe damage and injuries
Make sure the air field is spacious never fly the plane too close to people and never get too close to a running propeller
If you find wrinkles on the covering as a result of weather changes you can use hot iron to remove the wrinkles Please begin with lower temperature setting and gradually raise the temperature until the wrinkles are gone Too hot an iron may damage the covering Dont use hot iron near the seams or edges hot iron will
melt the glue and shrink the covering at the same time causing the seams to pull away
Check and re-tighten up all factory assembled screws use thread locker if necessary
c 040-0 4c 052
Important Safety Precautions
Warning
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
LINKAGE CONNECTOR
HW7111050 amp HW7111060
After fastening the round nut make sure that the linkage connector can rotate freely
Drill 2mm hole at servo hornInsert linkage connectorinto servo horn
Make sure shoulder ofscrew is cleared fromservo hornAdd washer to reduceplay if necessary
Shoulder
Tighten up the round nutagainst the shoulder ApplyCA or permanent threadlocker
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model including
product news and free upgrade parts when applicable Please fill in the following and send to
AirBorne Models 4749-K Bennett Drive Livermore CA 94551 USA
1 Name
2 Address
3 Phone E-mail
4 Model
Wing QC Fuselage QC(QC numbers are stamped on wing and fuselage)
5 Date of Purchase
6 Store Name
Please call AirBorne Models at 925 371 0922 for any assistance in filling this formThank you very much for purchasing our product
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Optional Parts
( ACCESSORIES)
180mm Extension For Park Flyer
KW0011800 180mm 1 set
Code No Size Package
Fuel Filler
PL8110030 15 x 22 x 49mm 1 x 1 pc
Code No Size Package
Charge Receptacles
KP0041300
Code No Size Package
Field Stand
MS9111430 600 x 240 x 310mm 1 pc
Code No Size Package
180mm Y-Cord For Park Flyer
KW0021800 180mm 1 pc
Code No Size Package
For park flyers of small electric models
Clevis Wrench
PL8210010 1 set
Code No Size Package
Small Clevis Large Clevis
Special tool for clevis installationSuitable for standard and small(EP) clevis
Standard ServoCode No SV4031
014 sec 60deg 60VTorque 32kgcm 448 oz - in 48V 41kgcm 574 oz - in 60VSize 406 x 20 x 37mm 160 x 079 x 146 inWeight 394 g 139 oz
Speed 017 sec 60deg 48V
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World Models
w w w t h e w o r l d m o d e l s c o mManufactur ing Co Ltd
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
- 页 1
- 页 2
- 页 3
- 页 4
- 页 5
- 页 6
- 页 7
- 页 8
- 页 9
- 页 10
- 页 11
- 页 12
- 页 13
- 页 14
- 页 15
- 页 16
-
P6
Front Landing Gear9
4 1 m m C o l l a r4
Engine Mount PL5111030
4
4
M3 x 25mm Socket Head Screw
d3x D7mm Washer
M3 x 25mmSocket Head Screw
d3 x D7mm
Blind nuts are off-centered to keep the spinner at the fuselage axis
Apply thread locker to screws
Engine Mount8
Fuel Tank7
Bottom View
3mm Set Screw
41mm Collar3mm Set Screw
Completed
Wheel Oslash65mm
3mm Set Screw
41mm Collar
Front View6x6x18mm Wood
If youthis step and 10A
want a tricycle landing gear follow
41mm Collar
1 2
3
CABLE TIE15x5x400mm
DOUBLE-SIDED TAPE 40x100mm
Fuel Tank
3
80cc
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P7
10
Engine12
Main Landing Gear
PA3x12mm Screw
11 Main Wheels
41mm Collar
3mm Set Screw
41mm Collar
104mm41in
SpinnerOslash57mm
Installed Engine Position
d3xD7mmWasher
d3xD7mmWasher
M3 Nut
Throttle PushwirePlastic tube
10A
10B
M3x25mm
Aluminum Plate 1mm
PM2x10mmd2xD5mm Washer
SpinnerOslash57mm
M2 NUT
Completed
PM2x10mm Screw
(Tail dragger landing gear)
(Tricycle landing gear)
M3x25mm Socket Head Screw
2mm
32mm
d2xD5mm Washer
d3xD7mm Washer
PA3x12mmPA3x12mm
For No10A
For No10B
Fr ont
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P8
PB2x12mm
Rudder PushrodOslash18x765mm
2mm
Horn
Bottom View
PB2x12mm
2mmHorn
Elevator PushrodOslash18x755mm
Rudder Pushrod13
Oslash1mm pilot holes for World Models horn are pre-drilled Please look for pin-hole marks at under side of control surfaces
Elevator Pushrod14
Oslash1mm pilot holes for World Models horn are pre-drilled Please look for pin-hole marks at under side of control surfaces
Servo Set15
3 x 3mm Set Screw
Linkage Connector
M2 Nut
2mm Washer
1
1
1
2
Please refer to attached sheet for linkage connector installation
Included with the radio Set
Throttl
e Pushwire
3x3mm Set Screw
Throttle Servo2mm
2mm Washer
M2 Nut
2mm Washer
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P9
18 Main Wing
d4xD15mm Washer
HM4x30mmd4xD15mm Washer
Wing Protection2x25x115mm
Install Sponge for inserting Battery and Receiver
PLYWOOD3x40x90mm
Throttle Servo
Elevator Servo
Elevator Pushrod
Rudder Pushrod
Rudder Servo
17 Radio Equipment
Throttle Pushwire
Fuel Tank380cc
Battery Receiver
SPONGE
Servos16
Front
PLYWOOD
3x40x87mmThrottle PushwireOslash12x500mmPlastic Tubed2xD3x380mm
BALSA7x7x40mm
Front Wheel Pushwire Oslash12x450mmPlastic Tube d2xD3x380mm
Fuel Tube Oslash6x5mm
Straper
Rudder Pushrod
Elevator Pushrod
BALSA7x7x40mm
3x854x95mm
PLYWOOD3x10x21mm
BALSA6x6x92mm
Charge ReceptaclesKP0041300
HM4x30mm Screw4mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P10
Wing Setting20
Canopy19
PWA23x8mm Screw
d15xD65mm Silicon Grommet
Silicon Grommetd15xD65mm
21 Control ThrowsRudder
Elevator
Flap
Aileron
21mm
6mm
21mm
14mm
14mm
6mm6mm
Adjust the control throws as shown in the diagram These throws are good for general flying You can adjust according to your personal preference
Adjust the wing and fuselage configuration asshown in the diagrams
1mm PWA23x8mm1mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P11
CG22
90mm354in CG
The ideal CG position is 90mm (354 in) behind the leading edge measured at where the wing meets the fuselage In order to obtain the CG specified add weight to the fuselage or move the battery position Check the CG before flying
First time flyer should never fly by himself herself Assistance from experienced flyer is absolutely necessary
Pre-flight adjustment must be done before flying it is very dangerous to fly a badly pre-adjusted aircraft
is specially designed to be powered by 2 46 or engine using a more powerful engine does not mean better performance In fact over powered engine may cause severe damage and injuries
Make sure the air field is spacious never fly the plane too close to people and never get too close to a running propeller
If you find wrinkles on the covering as a result of weather changes you can use hot iron to remove the wrinkles Please begin with lower temperature setting and gradually raise the temperature until the wrinkles are gone Too hot an iron may damage the covering Dont use hot iron near the seams or edges hot iron will
melt the glue and shrink the covering at the same time causing the seams to pull away
Check and re-tighten up all factory assembled screws use thread locker if necessary
c 040-0 4c 052
Important Safety Precautions
Warning
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
LINKAGE CONNECTOR
HW7111050 amp HW7111060
After fastening the round nut make sure that the linkage connector can rotate freely
Drill 2mm hole at servo hornInsert linkage connectorinto servo horn
Make sure shoulder ofscrew is cleared fromservo hornAdd washer to reduceplay if necessary
Shoulder
Tighten up the round nutagainst the shoulder ApplyCA or permanent threadlocker
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model including
product news and free upgrade parts when applicable Please fill in the following and send to
AirBorne Models 4749-K Bennett Drive Livermore CA 94551 USA
1 Name
2 Address
3 Phone E-mail
4 Model
Wing QC Fuselage QC(QC numbers are stamped on wing and fuselage)
5 Date of Purchase
6 Store Name
Please call AirBorne Models at 925 371 0922 for any assistance in filling this formThank you very much for purchasing our product
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Optional Parts
( ACCESSORIES)
180mm Extension For Park Flyer
KW0011800 180mm 1 set
Code No Size Package
Fuel Filler
PL8110030 15 x 22 x 49mm 1 x 1 pc
Code No Size Package
Charge Receptacles
KP0041300
Code No Size Package
Field Stand
MS9111430 600 x 240 x 310mm 1 pc
Code No Size Package
180mm Y-Cord For Park Flyer
KW0021800 180mm 1 pc
Code No Size Package
For park flyers of small electric models
Clevis Wrench
PL8210010 1 set
Code No Size Package
Small Clevis Large Clevis
Special tool for clevis installationSuitable for standard and small(EP) clevis
Standard ServoCode No SV4031
014 sec 60deg 60VTorque 32kgcm 448 oz - in 48V 41kgcm 574 oz - in 60VSize 406 x 20 x 37mm 160 x 079 x 146 inWeight 394 g 139 oz
Speed 017 sec 60deg 48V
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World Models
w w w t h e w o r l d m o d e l s c o mManufactur ing Co Ltd
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
- 页 1
- 页 2
- 页 3
- 页 4
- 页 5
- 页 6
- 页 7
- 页 8
- 页 9
- 页 10
- 页 11
- 页 12
- 页 13
- 页 14
- 页 15
- 页 16
-
P7
10
Engine12
Main Landing Gear
PA3x12mm Screw
11 Main Wheels
41mm Collar
3mm Set Screw
41mm Collar
104mm41in
SpinnerOslash57mm
Installed Engine Position
d3xD7mmWasher
d3xD7mmWasher
M3 Nut
Throttle PushwirePlastic tube
10A
10B
M3x25mm
Aluminum Plate 1mm
PM2x10mmd2xD5mm Washer
SpinnerOslash57mm
M2 NUT
Completed
PM2x10mm Screw
(Tail dragger landing gear)
(Tricycle landing gear)
M3x25mm Socket Head Screw
2mm
32mm
d2xD5mm Washer
d3xD7mm Washer
PA3x12mmPA3x12mm
For No10A
For No10B
Fr ont
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P8
PB2x12mm
Rudder PushrodOslash18x765mm
2mm
Horn
Bottom View
PB2x12mm
2mmHorn
Elevator PushrodOslash18x755mm
Rudder Pushrod13
Oslash1mm pilot holes for World Models horn are pre-drilled Please look for pin-hole marks at under side of control surfaces
Elevator Pushrod14
Oslash1mm pilot holes for World Models horn are pre-drilled Please look for pin-hole marks at under side of control surfaces
Servo Set15
3 x 3mm Set Screw
Linkage Connector
M2 Nut
2mm Washer
1
1
1
2
Please refer to attached sheet for linkage connector installation
Included with the radio Set
Throttl
e Pushwire
3x3mm Set Screw
Throttle Servo2mm
2mm Washer
M2 Nut
2mm Washer
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P9
18 Main Wing
d4xD15mm Washer
HM4x30mmd4xD15mm Washer
Wing Protection2x25x115mm
Install Sponge for inserting Battery and Receiver
PLYWOOD3x40x90mm
Throttle Servo
Elevator Servo
Elevator Pushrod
Rudder Pushrod
Rudder Servo
17 Radio Equipment
Throttle Pushwire
Fuel Tank380cc
Battery Receiver
SPONGE
Servos16
Front
PLYWOOD
3x40x87mmThrottle PushwireOslash12x500mmPlastic Tubed2xD3x380mm
BALSA7x7x40mm
Front Wheel Pushwire Oslash12x450mmPlastic Tube d2xD3x380mm
Fuel Tube Oslash6x5mm
Straper
Rudder Pushrod
Elevator Pushrod
BALSA7x7x40mm
3x854x95mm
PLYWOOD3x10x21mm
BALSA6x6x92mm
Charge ReceptaclesKP0041300
HM4x30mm Screw4mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P10
Wing Setting20
Canopy19
PWA23x8mm Screw
d15xD65mm Silicon Grommet
Silicon Grommetd15xD65mm
21 Control ThrowsRudder
Elevator
Flap
Aileron
21mm
6mm
21mm
14mm
14mm
6mm6mm
Adjust the control throws as shown in the diagram These throws are good for general flying You can adjust according to your personal preference
Adjust the wing and fuselage configuration asshown in the diagrams
1mm PWA23x8mm1mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P11
CG22
90mm354in CG
The ideal CG position is 90mm (354 in) behind the leading edge measured at where the wing meets the fuselage In order to obtain the CG specified add weight to the fuselage or move the battery position Check the CG before flying
First time flyer should never fly by himself herself Assistance from experienced flyer is absolutely necessary
Pre-flight adjustment must be done before flying it is very dangerous to fly a badly pre-adjusted aircraft
is specially designed to be powered by 2 46 or engine using a more powerful engine does not mean better performance In fact over powered engine may cause severe damage and injuries
Make sure the air field is spacious never fly the plane too close to people and never get too close to a running propeller
If you find wrinkles on the covering as a result of weather changes you can use hot iron to remove the wrinkles Please begin with lower temperature setting and gradually raise the temperature until the wrinkles are gone Too hot an iron may damage the covering Dont use hot iron near the seams or edges hot iron will
melt the glue and shrink the covering at the same time causing the seams to pull away
Check and re-tighten up all factory assembled screws use thread locker if necessary
c 040-0 4c 052
Important Safety Precautions
Warning
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
LINKAGE CONNECTOR
HW7111050 amp HW7111060
After fastening the round nut make sure that the linkage connector can rotate freely
Drill 2mm hole at servo hornInsert linkage connectorinto servo horn
Make sure shoulder ofscrew is cleared fromservo hornAdd washer to reduceplay if necessary
Shoulder
Tighten up the round nutagainst the shoulder ApplyCA or permanent threadlocker
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model including
product news and free upgrade parts when applicable Please fill in the following and send to
AirBorne Models 4749-K Bennett Drive Livermore CA 94551 USA
1 Name
2 Address
3 Phone E-mail
4 Model
Wing QC Fuselage QC(QC numbers are stamped on wing and fuselage)
5 Date of Purchase
6 Store Name
Please call AirBorne Models at 925 371 0922 for any assistance in filling this formThank you very much for purchasing our product
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Optional Parts
( ACCESSORIES)
180mm Extension For Park Flyer
KW0011800 180mm 1 set
Code No Size Package
Fuel Filler
PL8110030 15 x 22 x 49mm 1 x 1 pc
Code No Size Package
Charge Receptacles
KP0041300
Code No Size Package
Field Stand
MS9111430 600 x 240 x 310mm 1 pc
Code No Size Package
180mm Y-Cord For Park Flyer
KW0021800 180mm 1 pc
Code No Size Package
For park flyers of small electric models
Clevis Wrench
PL8210010 1 set
Code No Size Package
Small Clevis Large Clevis
Special tool for clevis installationSuitable for standard and small(EP) clevis
Standard ServoCode No SV4031
014 sec 60deg 60VTorque 32kgcm 448 oz - in 48V 41kgcm 574 oz - in 60VSize 406 x 20 x 37mm 160 x 079 x 146 inWeight 394 g 139 oz
Speed 017 sec 60deg 48V
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World Models
w w w t h e w o r l d m o d e l s c o mManufactur ing Co Ltd
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
- 页 1
- 页 2
- 页 3
- 页 4
- 页 5
- 页 6
- 页 7
- 页 8
- 页 9
- 页 10
- 页 11
- 页 12
- 页 13
- 页 14
- 页 15
- 页 16
-
P8
PB2x12mm
Rudder PushrodOslash18x765mm
2mm
Horn
Bottom View
PB2x12mm
2mmHorn
Elevator PushrodOslash18x755mm
Rudder Pushrod13
Oslash1mm pilot holes for World Models horn are pre-drilled Please look for pin-hole marks at under side of control surfaces
Elevator Pushrod14
Oslash1mm pilot holes for World Models horn are pre-drilled Please look for pin-hole marks at under side of control surfaces
Servo Set15
3 x 3mm Set Screw
Linkage Connector
M2 Nut
2mm Washer
1
1
1
2
Please refer to attached sheet for linkage connector installation
Included with the radio Set
Throttl
e Pushwire
3x3mm Set Screw
Throttle Servo2mm
2mm Washer
M2 Nut
2mm Washer
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P9
18 Main Wing
d4xD15mm Washer
HM4x30mmd4xD15mm Washer
Wing Protection2x25x115mm
Install Sponge for inserting Battery and Receiver
PLYWOOD3x40x90mm
Throttle Servo
Elevator Servo
Elevator Pushrod
Rudder Pushrod
Rudder Servo
17 Radio Equipment
Throttle Pushwire
Fuel Tank380cc
Battery Receiver
SPONGE
Servos16
Front
PLYWOOD
3x40x87mmThrottle PushwireOslash12x500mmPlastic Tubed2xD3x380mm
BALSA7x7x40mm
Front Wheel Pushwire Oslash12x450mmPlastic Tube d2xD3x380mm
Fuel Tube Oslash6x5mm
Straper
Rudder Pushrod
Elevator Pushrod
BALSA7x7x40mm
3x854x95mm
PLYWOOD3x10x21mm
BALSA6x6x92mm
Charge ReceptaclesKP0041300
HM4x30mm Screw4mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P10
Wing Setting20
Canopy19
PWA23x8mm Screw
d15xD65mm Silicon Grommet
Silicon Grommetd15xD65mm
21 Control ThrowsRudder
Elevator
Flap
Aileron
21mm
6mm
21mm
14mm
14mm
6mm6mm
Adjust the control throws as shown in the diagram These throws are good for general flying You can adjust according to your personal preference
Adjust the wing and fuselage configuration asshown in the diagrams
1mm PWA23x8mm1mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P11
CG22
90mm354in CG
The ideal CG position is 90mm (354 in) behind the leading edge measured at where the wing meets the fuselage In order to obtain the CG specified add weight to the fuselage or move the battery position Check the CG before flying
First time flyer should never fly by himself herself Assistance from experienced flyer is absolutely necessary
Pre-flight adjustment must be done before flying it is very dangerous to fly a badly pre-adjusted aircraft
is specially designed to be powered by 2 46 or engine using a more powerful engine does not mean better performance In fact over powered engine may cause severe damage and injuries
Make sure the air field is spacious never fly the plane too close to people and never get too close to a running propeller
If you find wrinkles on the covering as a result of weather changes you can use hot iron to remove the wrinkles Please begin with lower temperature setting and gradually raise the temperature until the wrinkles are gone Too hot an iron may damage the covering Dont use hot iron near the seams or edges hot iron will
melt the glue and shrink the covering at the same time causing the seams to pull away
Check and re-tighten up all factory assembled screws use thread locker if necessary
c 040-0 4c 052
Important Safety Precautions
Warning
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
LINKAGE CONNECTOR
HW7111050 amp HW7111060
After fastening the round nut make sure that the linkage connector can rotate freely
Drill 2mm hole at servo hornInsert linkage connectorinto servo horn
Make sure shoulder ofscrew is cleared fromservo hornAdd washer to reduceplay if necessary
Shoulder
Tighten up the round nutagainst the shoulder ApplyCA or permanent threadlocker
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model including
product news and free upgrade parts when applicable Please fill in the following and send to
AirBorne Models 4749-K Bennett Drive Livermore CA 94551 USA
1 Name
2 Address
3 Phone E-mail
4 Model
Wing QC Fuselage QC(QC numbers are stamped on wing and fuselage)
5 Date of Purchase
6 Store Name
Please call AirBorne Models at 925 371 0922 for any assistance in filling this formThank you very much for purchasing our product
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Optional Parts
( ACCESSORIES)
180mm Extension For Park Flyer
KW0011800 180mm 1 set
Code No Size Package
Fuel Filler
PL8110030 15 x 22 x 49mm 1 x 1 pc
Code No Size Package
Charge Receptacles
KP0041300
Code No Size Package
Field Stand
MS9111430 600 x 240 x 310mm 1 pc
Code No Size Package
180mm Y-Cord For Park Flyer
KW0021800 180mm 1 pc
Code No Size Package
For park flyers of small electric models
Clevis Wrench
PL8210010 1 set
Code No Size Package
Small Clevis Large Clevis
Special tool for clevis installationSuitable for standard and small(EP) clevis
Standard ServoCode No SV4031
014 sec 60deg 60VTorque 32kgcm 448 oz - in 48V 41kgcm 574 oz - in 60VSize 406 x 20 x 37mm 160 x 079 x 146 inWeight 394 g 139 oz
Speed 017 sec 60deg 48V
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World Models
w w w t h e w o r l d m o d e l s c o mManufactur ing Co Ltd
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
- 页 1
- 页 2
- 页 3
- 页 4
- 页 5
- 页 6
- 页 7
- 页 8
- 页 9
- 页 10
- 页 11
- 页 12
- 页 13
- 页 14
- 页 15
- 页 16
-
P9
18 Main Wing
d4xD15mm Washer
HM4x30mmd4xD15mm Washer
Wing Protection2x25x115mm
Install Sponge for inserting Battery and Receiver
PLYWOOD3x40x90mm
Throttle Servo
Elevator Servo
Elevator Pushrod
Rudder Pushrod
Rudder Servo
17 Radio Equipment
Throttle Pushwire
Fuel Tank380cc
Battery Receiver
SPONGE
Servos16
Front
PLYWOOD
3x40x87mmThrottle PushwireOslash12x500mmPlastic Tubed2xD3x380mm
BALSA7x7x40mm
Front Wheel Pushwire Oslash12x450mmPlastic Tube d2xD3x380mm
Fuel Tube Oslash6x5mm
Straper
Rudder Pushrod
Elevator Pushrod
BALSA7x7x40mm
3x854x95mm
PLYWOOD3x10x21mm
BALSA6x6x92mm
Charge ReceptaclesKP0041300
HM4x30mm Screw4mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P10
Wing Setting20
Canopy19
PWA23x8mm Screw
d15xD65mm Silicon Grommet
Silicon Grommetd15xD65mm
21 Control ThrowsRudder
Elevator
Flap
Aileron
21mm
6mm
21mm
14mm
14mm
6mm6mm
Adjust the control throws as shown in the diagram These throws are good for general flying You can adjust according to your personal preference
Adjust the wing and fuselage configuration asshown in the diagrams
1mm PWA23x8mm1mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P11
CG22
90mm354in CG
The ideal CG position is 90mm (354 in) behind the leading edge measured at where the wing meets the fuselage In order to obtain the CG specified add weight to the fuselage or move the battery position Check the CG before flying
First time flyer should never fly by himself herself Assistance from experienced flyer is absolutely necessary
Pre-flight adjustment must be done before flying it is very dangerous to fly a badly pre-adjusted aircraft
is specially designed to be powered by 2 46 or engine using a more powerful engine does not mean better performance In fact over powered engine may cause severe damage and injuries
Make sure the air field is spacious never fly the plane too close to people and never get too close to a running propeller
If you find wrinkles on the covering as a result of weather changes you can use hot iron to remove the wrinkles Please begin with lower temperature setting and gradually raise the temperature until the wrinkles are gone Too hot an iron may damage the covering Dont use hot iron near the seams or edges hot iron will
melt the glue and shrink the covering at the same time causing the seams to pull away
Check and re-tighten up all factory assembled screws use thread locker if necessary
c 040-0 4c 052
Important Safety Precautions
Warning
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
LINKAGE CONNECTOR
HW7111050 amp HW7111060
After fastening the round nut make sure that the linkage connector can rotate freely
Drill 2mm hole at servo hornInsert linkage connectorinto servo horn
Make sure shoulder ofscrew is cleared fromservo hornAdd washer to reduceplay if necessary
Shoulder
Tighten up the round nutagainst the shoulder ApplyCA or permanent threadlocker
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model including
product news and free upgrade parts when applicable Please fill in the following and send to
AirBorne Models 4749-K Bennett Drive Livermore CA 94551 USA
1 Name
2 Address
3 Phone E-mail
4 Model
Wing QC Fuselage QC(QC numbers are stamped on wing and fuselage)
5 Date of Purchase
6 Store Name
Please call AirBorne Models at 925 371 0922 for any assistance in filling this formThank you very much for purchasing our product
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Optional Parts
( ACCESSORIES)
180mm Extension For Park Flyer
KW0011800 180mm 1 set
Code No Size Package
Fuel Filler
PL8110030 15 x 22 x 49mm 1 x 1 pc
Code No Size Package
Charge Receptacles
KP0041300
Code No Size Package
Field Stand
MS9111430 600 x 240 x 310mm 1 pc
Code No Size Package
180mm Y-Cord For Park Flyer
KW0021800 180mm 1 pc
Code No Size Package
For park flyers of small electric models
Clevis Wrench
PL8210010 1 set
Code No Size Package
Small Clevis Large Clevis
Special tool for clevis installationSuitable for standard and small(EP) clevis
Standard ServoCode No SV4031
014 sec 60deg 60VTorque 32kgcm 448 oz - in 48V 41kgcm 574 oz - in 60VSize 406 x 20 x 37mm 160 x 079 x 146 inWeight 394 g 139 oz
Speed 017 sec 60deg 48V
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World Models
w w w t h e w o r l d m o d e l s c o mManufactur ing Co Ltd
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
- 页 1
- 页 2
- 页 3
- 页 4
- 页 5
- 页 6
- 页 7
- 页 8
- 页 9
- 页 10
- 页 11
- 页 12
- 页 13
- 页 14
- 页 15
- 页 16
-
P10
Wing Setting20
Canopy19
PWA23x8mm Screw
d15xD65mm Silicon Grommet
Silicon Grommetd15xD65mm
21 Control ThrowsRudder
Elevator
Flap
Aileron
21mm
6mm
21mm
14mm
14mm
6mm6mm
Adjust the control throws as shown in the diagram These throws are good for general flying You can adjust according to your personal preference
Adjust the wing and fuselage configuration asshown in the diagrams
1mm PWA23x8mm1mm
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
P11
CG22
90mm354in CG
The ideal CG position is 90mm (354 in) behind the leading edge measured at where the wing meets the fuselage In order to obtain the CG specified add weight to the fuselage or move the battery position Check the CG before flying
First time flyer should never fly by himself herself Assistance from experienced flyer is absolutely necessary
Pre-flight adjustment must be done before flying it is very dangerous to fly a badly pre-adjusted aircraft
is specially designed to be powered by 2 46 or engine using a more powerful engine does not mean better performance In fact over powered engine may cause severe damage and injuries
Make sure the air field is spacious never fly the plane too close to people and never get too close to a running propeller
If you find wrinkles on the covering as a result of weather changes you can use hot iron to remove the wrinkles Please begin with lower temperature setting and gradually raise the temperature until the wrinkles are gone Too hot an iron may damage the covering Dont use hot iron near the seams or edges hot iron will
melt the glue and shrink the covering at the same time causing the seams to pull away
Check and re-tighten up all factory assembled screws use thread locker if necessary
c 040-0 4c 052
Important Safety Precautions
Warning
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
LINKAGE CONNECTOR
HW7111050 amp HW7111060
After fastening the round nut make sure that the linkage connector can rotate freely
Drill 2mm hole at servo hornInsert linkage connectorinto servo horn
Make sure shoulder ofscrew is cleared fromservo hornAdd washer to reduceplay if necessary
Shoulder
Tighten up the round nutagainst the shoulder ApplyCA or permanent threadlocker
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model including
product news and free upgrade parts when applicable Please fill in the following and send to
AirBorne Models 4749-K Bennett Drive Livermore CA 94551 USA
1 Name
2 Address
3 Phone E-mail
4 Model
Wing QC Fuselage QC(QC numbers are stamped on wing and fuselage)
5 Date of Purchase
6 Store Name
Please call AirBorne Models at 925 371 0922 for any assistance in filling this formThank you very much for purchasing our product
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Optional Parts
( ACCESSORIES)
180mm Extension For Park Flyer
KW0011800 180mm 1 set
Code No Size Package
Fuel Filler
PL8110030 15 x 22 x 49mm 1 x 1 pc
Code No Size Package
Charge Receptacles
KP0041300
Code No Size Package
Field Stand
MS9111430 600 x 240 x 310mm 1 pc
Code No Size Package
180mm Y-Cord For Park Flyer
KW0021800 180mm 1 pc
Code No Size Package
For park flyers of small electric models
Clevis Wrench
PL8210010 1 set
Code No Size Package
Small Clevis Large Clevis
Special tool for clevis installationSuitable for standard and small(EP) clevis
Standard ServoCode No SV4031
014 sec 60deg 60VTorque 32kgcm 448 oz - in 48V 41kgcm 574 oz - in 60VSize 406 x 20 x 37mm 160 x 079 x 146 inWeight 394 g 139 oz
Speed 017 sec 60deg 48V
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World Models
w w w t h e w o r l d m o d e l s c o mManufactur ing Co Ltd
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
- 页 1
- 页 2
- 页 3
- 页 4
- 页 5
- 页 6
- 页 7
- 页 8
- 页 9
- 页 10
- 页 11
- 页 12
- 页 13
- 页 14
- 页 15
- 页 16
-
P11
CG22
90mm354in CG
The ideal CG position is 90mm (354 in) behind the leading edge measured at where the wing meets the fuselage In order to obtain the CG specified add weight to the fuselage or move the battery position Check the CG before flying
First time flyer should never fly by himself herself Assistance from experienced flyer is absolutely necessary
Pre-flight adjustment must be done before flying it is very dangerous to fly a badly pre-adjusted aircraft
is specially designed to be powered by 2 46 or engine using a more powerful engine does not mean better performance In fact over powered engine may cause severe damage and injuries
Make sure the air field is spacious never fly the plane too close to people and never get too close to a running propeller
If you find wrinkles on the covering as a result of weather changes you can use hot iron to remove the wrinkles Please begin with lower temperature setting and gradually raise the temperature until the wrinkles are gone Too hot an iron may damage the covering Dont use hot iron near the seams or edges hot iron will
melt the glue and shrink the covering at the same time causing the seams to pull away
Check and re-tighten up all factory assembled screws use thread locker if necessary
c 040-0 4c 052
Important Safety Precautions
Warning
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
LINKAGE CONNECTOR
HW7111050 amp HW7111060
After fastening the round nut make sure that the linkage connector can rotate freely
Drill 2mm hole at servo hornInsert linkage connectorinto servo horn
Make sure shoulder ofscrew is cleared fromservo hornAdd washer to reduceplay if necessary
Shoulder
Tighten up the round nutagainst the shoulder ApplyCA or permanent threadlocker
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model including
product news and free upgrade parts when applicable Please fill in the following and send to
AirBorne Models 4749-K Bennett Drive Livermore CA 94551 USA
1 Name
2 Address
3 Phone E-mail
4 Model
Wing QC Fuselage QC(QC numbers are stamped on wing and fuselage)
5 Date of Purchase
6 Store Name
Please call AirBorne Models at 925 371 0922 for any assistance in filling this formThank you very much for purchasing our product
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Optional Parts
( ACCESSORIES)
180mm Extension For Park Flyer
KW0011800 180mm 1 set
Code No Size Package
Fuel Filler
PL8110030 15 x 22 x 49mm 1 x 1 pc
Code No Size Package
Charge Receptacles
KP0041300
Code No Size Package
Field Stand
MS9111430 600 x 240 x 310mm 1 pc
Code No Size Package
180mm Y-Cord For Park Flyer
KW0021800 180mm 1 pc
Code No Size Package
For park flyers of small electric models
Clevis Wrench
PL8210010 1 set
Code No Size Package
Small Clevis Large Clevis
Special tool for clevis installationSuitable for standard and small(EP) clevis
Standard ServoCode No SV4031
014 sec 60deg 60VTorque 32kgcm 448 oz - in 48V 41kgcm 574 oz - in 60VSize 406 x 20 x 37mm 160 x 079 x 146 inWeight 394 g 139 oz
Speed 017 sec 60deg 48V
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World Models
w w w t h e w o r l d m o d e l s c o mManufactur ing Co Ltd
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
- 页 1
- 页 2
- 页 3
- 页 4
- 页 5
- 页 6
- 页 7
- 页 8
- 页 9
- 页 10
- 页 11
- 页 12
- 页 13
- 页 14
- 页 15
- 页 16
-
LINKAGE CONNECTOR
HW7111050 amp HW7111060
After fastening the round nut make sure that the linkage connector can rotate freely
Drill 2mm hole at servo hornInsert linkage connectorinto servo horn
Make sure shoulder ofscrew is cleared fromservo hornAdd washer to reduceplay if necessary
Shoulder
Tighten up the round nutagainst the shoulder ApplyCA or permanent threadlocker
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model including
product news and free upgrade parts when applicable Please fill in the following and send to
AirBorne Models 4749-K Bennett Drive Livermore CA 94551 USA
1 Name
2 Address
3 Phone E-mail
4 Model
Wing QC Fuselage QC(QC numbers are stamped on wing and fuselage)
5 Date of Purchase
6 Store Name
Please call AirBorne Models at 925 371 0922 for any assistance in filling this formThank you very much for purchasing our product
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Optional Parts
( ACCESSORIES)
180mm Extension For Park Flyer
KW0011800 180mm 1 set
Code No Size Package
Fuel Filler
PL8110030 15 x 22 x 49mm 1 x 1 pc
Code No Size Package
Charge Receptacles
KP0041300
Code No Size Package
Field Stand
MS9111430 600 x 240 x 310mm 1 pc
Code No Size Package
180mm Y-Cord For Park Flyer
KW0021800 180mm 1 pc
Code No Size Package
For park flyers of small electric models
Clevis Wrench
PL8210010 1 set
Code No Size Package
Small Clevis Large Clevis
Special tool for clevis installationSuitable for standard and small(EP) clevis
Standard ServoCode No SV4031
014 sec 60deg 60VTorque 32kgcm 448 oz - in 48V 41kgcm 574 oz - in 60VSize 406 x 20 x 37mm 160 x 079 x 146 inWeight 394 g 139 oz
Speed 017 sec 60deg 48V
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World Models
w w w t h e w o r l d m o d e l s c o mManufactur ing Co Ltd
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
- 页 1
- 页 2
- 页 3
- 页 4
- 页 5
- 页 6
- 页 7
- 页 8
- 页 9
- 页 10
- 页 11
- 页 12
- 页 13
- 页 14
- 页 15
- 页 16
-
Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model including
product news and free upgrade parts when applicable Please fill in the following and send to
AirBorne Models 4749-K Bennett Drive Livermore CA 94551 USA
1 Name
2 Address
3 Phone E-mail
4 Model
Wing QC Fuselage QC(QC numbers are stamped on wing and fuselage)
5 Date of Purchase
6 Store Name
Please call AirBorne Models at 925 371 0922 for any assistance in filling this formThank you very much for purchasing our product
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
Optional Parts
( ACCESSORIES)
180mm Extension For Park Flyer
KW0011800 180mm 1 set
Code No Size Package
Fuel Filler
PL8110030 15 x 22 x 49mm 1 x 1 pc
Code No Size Package
Charge Receptacles
KP0041300
Code No Size Package
Field Stand
MS9111430 600 x 240 x 310mm 1 pc
Code No Size Package
180mm Y-Cord For Park Flyer
KW0021800 180mm 1 pc
Code No Size Package
For park flyers of small electric models
Clevis Wrench
PL8210010 1 set
Code No Size Package
Small Clevis Large Clevis
Special tool for clevis installationSuitable for standard and small(EP) clevis
Standard ServoCode No SV4031
014 sec 60deg 60VTorque 32kgcm 448 oz - in 48V 41kgcm 574 oz - in 60VSize 406 x 20 x 37mm 160 x 079 x 146 inWeight 394 g 139 oz
Speed 017 sec 60deg 48V
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World Models
w w w t h e w o r l d m o d e l s c o mManufactur ing Co Ltd
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
- 页 1
- 页 2
- 页 3
- 页 4
- 页 5
- 页 6
- 页 7
- 页 8
- 页 9
- 页 10
- 页 11
- 页 12
- 页 13
- 页 14
- 页 15
- 页 16
-
Optional Parts
( ACCESSORIES)
180mm Extension For Park Flyer
KW0011800 180mm 1 set
Code No Size Package
Fuel Filler
PL8110030 15 x 22 x 49mm 1 x 1 pc
Code No Size Package
Charge Receptacles
KP0041300
Code No Size Package
Field Stand
MS9111430 600 x 240 x 310mm 1 pc
Code No Size Package
180mm Y-Cord For Park Flyer
KW0021800 180mm 1 pc
Code No Size Package
For park flyers of small electric models
Clevis Wrench
PL8210010 1 set
Code No Size Package
Small Clevis Large Clevis
Special tool for clevis installationSuitable for standard and small(EP) clevis
Standard ServoCode No SV4031
014 sec 60deg 60VTorque 32kgcm 448 oz - in 48V 41kgcm 574 oz - in 60VSize 406 x 20 x 37mm 160 x 079 x 146 inWeight 394 g 139 oz
Speed 017 sec 60deg 48V
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World Models
w w w t h e w o r l d m o d e l s c o mManufactur ing Co Ltd
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
- 页 1
- 页 2
- 页 3
- 页 4
- 页 5
- 页 6
- 页 7
- 页 8
- 页 9
- 页 10
- 页 11
- 页 12
- 页 13
- 页 14
- 页 15
- 页 16
-
The World Models
w w w t h e w o r l d m o d e l s c o mManufactur ing Co Ltd
A113FPO25541103
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
The World M
odels
Manufacturing Co Ltd
ww
w thew
orldmodels com
- 页 1
- 页 2
- 页 3
- 页 4
- 页 5
- 页 6
- 页 7
- 页 8
- 页 9
- 页 10
- 页 11
- 页 12
- 页 13
- 页 14
- 页 15
- 页 16
-
