02_RADAR_TUTORIAL.pdf
-
Upload
marko-matic -
Category
Documents
-
view
223 -
download
0
Transcript of 02_RADAR_TUTORIAL.pdf
-
8/10/2019 02_RADAR_TUTORIAL.pdf
1/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 1
-
8/10/2019 02_RADAR_TUTORIAL.pdf
2/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 2
-
8/10/2019 02_RADAR_TUTORIAL.pdf
3/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 3
Open SolidWorks
$o to% Start > Programs > SolidWorks
Create a new part
&pen a new part with model unit' 'et to millimeter'.
$o to% File > New > Part
(elect the three plane' in t
he )eature tree and
ma*e them +i'ible by clic*ing on the gla''e'.
$o to% File > Save
$i+e thi' part the )ollowing name% Radar
-
8/10/2019 02_RADAR_TUTORIAL.pdf
4/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 4
Create a new sketc on te Rigt Plane
(elect the Rigt Planein the ,eature -anager
Clic* at the 2! Sketcicon to ma*e a new '*etch
raw the )our line' a' 'hown in the picture
/dd the dimen'ion' a' 'hown in the picture
-
8/10/2019 02_RADAR_TUTORIAL.pdf
5/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # "
Create an #$tr%de
$o to% &nsert > 'oss('ase > #$tr%de or clic* at the trude icon
Change the epth into 00 mm
Clic* &3
-
8/10/2019 02_RADAR_TUTORIAL.pdf
6/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # )
Create a Fillet
$o to% &nsert > Feat%res > Fillet(Ro%ndor clic* at the ,illet icon
Clic* at the two blue edge' a' 'hown in the picture
Change the adiu' into 45 mm
Clic* &3
-
8/10/2019 02_RADAR_TUTORIAL.pdf
7/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # *
Create anoter Fillet
$o to% &nsert > Feat%res > Fillet(Ro%ndor clic* at the ,illet icon
Clic* at the blue edge a' 'hown in the picture
Change the adiu' into 20 mm
Clic* &3
-
8/10/2019 02_RADAR_TUTORIAL.pdf
8/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # +
Create anoter Fillet
$o to% &nsert > Feat%res > Fillet(Ro%ndor clic* at the ,illet icon
Clic* at the blue edge a' 'hown in the picture
Change the adiu' into 60 mm
Clic* &3
-
8/10/2019 02_RADAR_TUTORIAL.pdf
9/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # ,
(elect the blue 'ur)ace and clic* at the 2! Sketcicon to ma*e a new '*etch
Clic* at the Normal -ooption to rotate the model normal to the 'elected 'ur)ace
O..set te edges o. te /l%e s%r.ace
(elect the blue 'ur)ace again
$o to -ools > Sketc -ools > O..set #ntitiesor clic* at the &))'et ntitie' icon
Change the O..set !istanceinto 6 mm
-a*e 'ure that the o))'et i' directed o%twards. 7) not8 clic* at the Reversebutton to change the direction.
Clic* &3
-
8/10/2019 02_RADAR_TUTORIAL.pdf
10/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 10
Create an #$tr%de
$o to% &nsert > 'oss('ase > #$tr%de or clic* at the trude icon
Change the epth into 10 mm
Clic* &3
-
8/10/2019 02_RADAR_TUTORIAL.pdf
11/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 11
(elect the blue 'ur)ace and clic* at the 2! Sketcicon to ma*e a new '*etch
Clic* at the Normal -ooption to rotate the model normal to the 'elected 'ur)ace
O..set te edges o. te /l%e s%r.ace
(elect the blue 'ur)ace again
$o to -ools > Sketc -ools > O..set #ntitiesor clic* at the &))'et ntitie' icon
Change the O..set !istanceinto 10 mm
-a*e 'ure that the o))'et i' directed inwards. 7) not8 clic* at the Reversebutton to change the direction.
Clic* &3
-
8/10/2019 02_RADAR_TUTORIAL.pdf
12/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 12
Click and dragyour cur'or o+er the '*etch to 'elect the o))'et
Clic* at the For constr%ctionoption to con+ert the o))'et line into a con'truction line
raw the circle a' 'hown in the picture
/dd the dimen'ion by clic*ing at the dimen'ion button
-
8/10/2019 02_RADAR_TUTORIAL.pdf
13/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 13
Create an #$tr%de
$o to% &nsert > 'oss('ase > #$tr%de or clic* at the trude icon
Change the epth into 6 mm
Clic* &3
-
8/10/2019 02_RADAR_TUTORIAL.pdf
14/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 14
Create a Fillet
$o to% &nsert > Feat%res > Fillet(Ro%ndor clic* at the ,illet icon
Clic* at the blue edge a' 'hown in the picture
Change the adiu' into 6 mm
Clic* &3
-
8/10/2019 02_RADAR_TUTORIAL.pdf
15/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 1"
(elect the blue 'ur)ace and clic* at the 2! Sketcicon to ma*e a new '*etch
Clic* at the Normal -ooption to rotate the model normal to the 'elected 'ur)ace
!raw a Polgon
$o to -ools > Sketc #ntities > Polgonor clic* at the "olygon icon
Change the Widtinto 689 mm
-
8/10/2019 02_RADAR_TUTORIAL.pdf
16/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 1)
Create an #$tr%ded C%t
$o to% &nsert > C%t > #$tr%deor clic* at the truded Cut icon
Change the epth into 1.9 mm
Clic* &3
-
8/10/2019 02_RADAR_TUTORIAL.pdf
17/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 1*
(elect the blue 'ur)ace and clic* at the 2! Sketcicon to ma*e a new '*etch
Clic* at the Normal -ooption to rotate the model normal to the 'elected 'ur)ace
!raw te tree points as sown in te pict%re
$o to -ools > Sketc -ools > Pointor clic* at the "oint icon
/dd the dimen'ion' by clic*ing at the dimen'ion button
Clic* &3
Clo'e the '*etch
-
8/10/2019 02_RADAR_TUTORIAL.pdf
18/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 1+
Create a Sketc !riven Pattern
$o to% &nsert > Pattern(irror > Sketc !riven Pattern or clic* at the (*etch ri+en "attern icon
e)erence (*etch % (elect (*etch9 a' re)erence '*etch
,eature' to "attern % :o'';trude68 ,illet48 Cut;trude2
Clic* &3
-
8/10/2019 02_RADAR_TUTORIAL.pdf
19/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 1,
Create a Fillet
$o to% &nsert > Feat%res > Fillet(Ro%ndor clic* at the ,illet icon
Clic* at the two blue edge' a' 'hown in the picture
Change the adiu' into 6 mm
Clic* &3
-
8/10/2019 02_RADAR_TUTORIAL.pdf
20/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 20
irror te radar
$o to &nsert > Pattern ( irror > irroror clic* at the -irror icon
(elect the ight "lane a' irror Face
(elect the 'odies to irroroption
Clic* at the blue body a' 'hown in the picture
nable the erge solidsoption
nable the 5nit S%r.acesoption
nable the Propagate vis%alpropertie'
Clic* &3
-
8/10/2019 02_RADAR_TUTORIAL.pdf
21/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 21
(elect the blue bottom 'ur)ace and clic* at the
2! Sketcicon to ma*e a new '*etch
Clic* at the Normal -ooption to rotate the
model normal to the 'elected plane
raw the circle a' 'hown in the picture
/dd the dimen'ion by clic*ing at the dimen'ion button
-
8/10/2019 02_RADAR_TUTORIAL.pdf
22/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 22
Create an #$tr%ded C%t
$o to% &nsert > C%t > #$tr%deor clic* at the truded Cut icon
Change the epth into 40 mm
Clic* &3
-
8/10/2019 02_RADAR_TUTORIAL.pdf
23/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 23
Create a Fillet
$o to% &nsert > Feat%res > Fillet(Ro%ndor clic* at the ,illet icon
Clic* at the two blue edge' a' 'hown in the picture
Change the adiu' into 6 mm
Clic* &3
-
8/10/2019 02_RADAR_TUTORIAL.pdf
24/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 24
Create a new 2! sketc on te /l%e s%r.ace o. te radar
(elect the blue 'ur)ace a' and clic* at the 2! Sketciconto ma*e a new '*etch
Clic* at the Normal -ooption to rotate and
-
8/10/2019 02_RADAR_TUTORIAL.pdf
25/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 2"
6dd a -e$t on te Radar
$o to -ools > Sketc #ntities > -e$tor clic* atthe Tet icon
Clic* at the horieight into 50 mm
Clic* &3
-
8/10/2019 02_RADAR_TUTORIAL.pdf
26/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 2)
Create Split 7ines o. te -e$t
$o to &nsert > C%rve > Split 7ineor clic* at the (plit Aine icon
(elect the Pro8ectionoption
(elect (*etch Bcurrent '*etch a' Sketc to Pro8ect
(elect the two blue 'ur)ace' a' Faces to Split
(elect the Single directionoption
Clic* &3
-
8/10/2019 02_RADAR_TUTORIAL.pdf
27/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 2*
Cange te color o. o%r radar
ight clic* at Radarin the )eature tree
Clic* at the appearance' icon
Clic* at adar
Change the color into white
Clic* &3
-
8/10/2019 02_RADAR_TUTORIAL.pdf
28/30
-
8/10/2019 02_RADAR_TUTORIAL.pdf
29/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 2,
9ide all planes and sketces
(a+e the )ile with the )ollowing name% Radar:sldprt
Well8 thatD' all8 youD+e ?u't )ini'hed the adar o) your own yacht. >ope you li*ed it.
Your (olidWor*' teacher8
Jan;Willem
P.S. Keep an eye at your mailbox because I will send you eBook #3 of this course in two more days.
-
8/10/2019 02_RADAR_TUTORIAL.pdf
30/30
Copyright 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks! "age # 30
In the next eBook you will learn how to setup the blueprints of your yacht in SolidWorks.