02.07.2020 NX-Schematics & NX-Routing 1 · • The unique integration ... Teamcenter to SAP...
Transcript of 02.07.2020 NX-Schematics & NX-Routing 1 · • The unique integration ... Teamcenter to SAP...
02.07.2020 NX-Schematics & NX-Routing 1
Agenda
02.07.2020 NX-Schematics & NX-Routing 2
• Who am I (not so important)• Intro• The big picture of development• The environment and relationships• The Products• NX-Schematics & NX-Routing• The Customers• A small customer overview
• NX-Schematic• What is it• Where is it being used• The unique integration• How did this unique "market leading solution" come about• Reasons why you should use NX-Schematic • The logic
• NX-Routing• What is it• Where is it being used• Advantaged from NX-Routing together with NX-Schematic
• NX-Schematic & NX-Routing• TC Structure• The Process
• NX-Schematic is unique• Important for sales
• Live Presentation (also Films)• Create a Schemata «general process» (also Film)• Create a Routing from Schematic (also Film)• Create an associative Routing from Schematic (also Film)• ANT & TC Structures (also Films)
Who I am
2/07/2020 NX-Schematics & NX-Routing 3
Cad-OasEs Int. GmbHwww.oases.ch
Roland Hofmann
Lettenstrasse 7 - Postfach 446CH 6343 Rotkreuz ZG
NX / UNIGRAPHICS NX from A - Z NX Schematics NX Routing Mechanical NX Routing Electrical NX Large Assemblies
TEAMCENTER
More than 30 years of NX experience
• Ex employee of McDonnell Douglas / EDSvon McDonnell Douglas & EDS
• 10 Years EDS Distributor in Perth AUS
More than 20 years NX Schematics & NX Routing experience ( this is my world )
• Specialist in NX Schematics
• Specialist in NX Routing
• Projects and Customers around the Globe
Partner of:
Siemens SwitzerlandSiemens GermanySiemens ItalySiemens TurkeySiemens SingaporeSiemens IndiaSiemens Mexico
Part of LTX / Canada
The Big Development Picture
02.07.2020 NX-Schematics & NX-Routing 4
The Environment / The Partners
02.07.2020 NX-Schematics & NX-Routing 5
NX Schematics is an LTX product andmarketing and distributed only by Siemens
NX schematics is developed and supported by LTX Software Inc. & CAD-OasEs int. GmbH
LTX in 1992 was one of the first Alliance partner of Siemens
20 Jahre
Installation / Setup / Training Division
Partner of:
Siemens SwitzerlandSiemens GermanySiemens ItalySiemens TurkeySiemens SingaporeSiemens IndiaSiemens Mexico
The Products
2020-07-02
NX-Schematics & NX-Routing 6
NX schematics is developed and supported by LTX Canada & CAD-OasEs int. GmbH
NX routing is developed and supported by Siemens
Both NX Schematics and Routing are marketed by Siemens and can be purchased only through Siemens or their marketing partners.
Both products run under Siemens maintenance.
Aeronautical Customers
02.07.2020 NX-Schematics & NX-Routing 7
Space Customer
02.07.2020 NX-Schematics & NX-Routing 8
Military Customers
02.07.2020 NX-Schematics & NX-Routing 9
Household Customers
02.07.2020 NX-Schematics & NX-Routing 10
Deutschland / Frankreich / Spanien / IndienChina / Türkei / Russland / USA / SlowenienPolen
Bei BSH wird Mentor für den PCB Design Bereich gebraucht
Medical Customers
02.07.2020 NX-Schematics & NX-Routing 11
NX-Schematics – NX-Routing – TC – Agile – SAP
Durchgehender Prozess mit allem was benötigt wird.
Bei Agilent wird Mentor für den PCB Design Bereich gebraucht
Vehicle Building Customers
02.07.2020 NX-Schematics & NX-Routing 12
Vehicle Building Customers
02.07.2020 NX-Schematics & NX-Routing 13
Maritim Customers
02.07.2020 NX-Schematics & NX-Routing 14
Industrial Customers
02.07.2020 NX-Schematics & NX-Routing 15
NX-Schematics
02.07.2020 NX-Schematics & NX-Routing 16
NX
NX Routing
NX Schematics
CSVPLMXML
TeamcenterMicrosoft Office
Siemens Produkt
What can you do with NX-Schematics
7/2/2020 NX-Schematics & NX-Routing 17
Any electrical Schematic
Any Layout
Any hydraulic Schematic
Any mechanical Schematic
The Integration
7/2/2020 NX-Schematics & NX-Routing 18
Direct from Schematics
NX-Routing Electrical
NX-Routing Mechanical
How did this unique Solution started
7/2/2020 NX-Schematics & NX-Routing 19
The Programmers
The Practice
About 15 year ago if started the whole thing together with the programmers from LTX. Today we have solution that nobody else has (not even close to it). We keep are develop and enhance the system day by day based on the customers demand.
Why should you use Schematics ?
7/2/2020 NX-Schematics & NX-Routing 20
Every System has its place in the industry
The Question is:
1. Does everybody need a Rolls Royce ?
2. De we really need a Porsche Cayenne ?
3. Or would a simple BMW 3 Series do the job
Why should you use Schematics ?
02.07.2020 NX-Schematics & NX-Routing 21
Why should you use Schematics ?
02.07.2020 NX-Schematics & NX-Routing 22
Common sense
02.07.2020 NX-Schematics & NX-Routing 23
Why should you use Schematics ?
7/2/2020 NX-Schematics & NX-Routing 24
There was a statement from the CEO «Mr. Bubeck»by the Dornier company:
"In the entire design process, we have only 1 interface, Teamcenter to SAP "
otherwise we make everything from within one System.
Unfortunately nobody believed it, but it is the truth
One 3D model and multiple instance in TC and ERP
02.07.2020 NX-Schematics & NX-Routing 25
Each part has it's own material number on the assembly level which comes from Schematics
This material Number is then transferred to theTC instance attribute AIE_OCC_ID.
This approach can save hundreds of 3D models inTeamcenter, saving a huge amount of time and money.
ANT structures in the TC environment
02.07.2020 NX-Schematics & NX-Routing 26
We create full TC structure of parts that are in Schematics but are never placed inthe 3D routing.
Only 2D without 3D Routing(Native and TC)
3D Routing(Native and TC)
Save lists directly in TC
7/2/2020 NX-Schematics & NX-Routing 27
Press a Button drops list into Teamcenter
• BOM• Connection Lists
If NX is already in use, nothing in the PLM must be adapted to the environment. All your processes work without any adjustment
Why should you use Schematics ?
7/2/2020 NX-Schematics & NX-Routing 28
There are two methods to work within Schematics
Item 4711Item 4712
Item 4713
Multi UsersSingle User
Nothing extra is needed here. MPM is uses
Option & Variation "Simple Handling"
02.07.2020 NX-Schematics & NX-Routing 29NX-Schematics & NX-Routing
Complete definition "Everything"
The new MPM function in NX-Schematicsgives you everything you ever needed !
ANT / BOM Structure
02.07.2020 NX-Schematics & NX-Routing 30NX-Schematics & NX-Routing
No matter if you only do 2D schemes or your process goes right into the 3D routing and form board, you get a full ANT Bom structure at every level.
2D Schematics 3D Routing 2D Formboard
Why is "Schematics" your System
7/2/2020 NX-Schematics & NX-Routing 31
• Top E-CAD System with worlds best integration
• Best ROI
• No additional Database
• No additional Interface
• No Export / Import of Data
• Simple Handling
• Changes are easy in Schematics and Routing
• All within one system
• One Contac Person for all
• All direct in the PLM (Teamcenter)
• No changes of your existing process
• Get your needed functionality quick and easy
NX-Routing
7/2/2020 NX-Schematics & NX-Routing 32
Mechanical Routing
Electrical Routing
Where is NX Routing used
7/2/2020 NX-Schematics & NX-Routing 33
In all Industries
The Process
7/2/2020 NX-Schematics & NX-Routing 34
2D Schematics:
NX Schematics is the leading system.
That means, all you define here is valid in Routing
And can be used and outputed.
3D Routing:
3D Routing is easy and very fast directly
from Schematics.
Native
ItemsFull associative
Bidirectional Function
Important: The whole process is based on Data pull process.
No Export / Import of Data
The Process (what is possible in Schematics ?)
7/2/2020 NX-Schematics & NX-Routing 35
Terminals(Order)(No-Order)
Cavity Seals(Order)(No-Order)
Wire Seals
Solder Sleeve
Add ons
Plugs
Backshells
Cables
Wires
Cable/WireMarkings
Pig-TailJumper
The Process (what is possible in Schematics ?)
7/2/2020 NX-Schematics & NX-Routing 36
Any kind of device
Any kind if shielding
Quadrax Pin
The Process (what is possible in Schematics ?)
7/2/2020 NX-Schematics & NX-Routing 37
Cable Diameter
Cable Weight
MinimumBendRadius
Calculation of Length and Cut Length (Cable and Wires)
Calculate the Weight including:
• Terminals• Cavity Seal• Backshell
Feed back to Schematics
The Process (what is possible in Schematics ?)
7/2/2020 NX-Schematics & NX-Routing 38
Unconnected Terminal and Cavity Sealsare still in the BOM (if they need to be ordered) if they need to be ordered although NX only displays connections that are also connected
All Schematics Attributes of Devices, Cables, Wires, Terminals, Cavity Seal, Backshells, Cable Markers, etc. are handed over 1: 1 to the 3D connector models, cables and wires.
We produce accurate cables and harness structures in 3D routing, 1:1 as in the Schematics (not possible with * .hrn files)
The Process (what is possible in Schematics ?)
7/2/2020 NX-Schematics & NX-Routing 39
Bidirectional Connection
No ExportNo Import
You can check the 3D Routing wiring at any time against the schematics and vice-versa.
Schematics is the leading system.
Changes in the schematic can also be made in Routing, because of the direct connection.
The Process (what is possible in Schematics ?)
7/2/2020 NX-Schematics & NX-Routing 40
Harness Structure
(With User InputOr full automatic
Experience solves most of the Problems
?? Not possible
Teamcenter Structure
7/2/2020 NX-Schematics & NX-Routing 41
Elektro-Routing
Mechanical-Routing
Elektro-Routing MPM
Mechanical-Routing MPM
Damit werden auch die MPM Freigegeben
All data directly fromSchematics
The Process
02.07.2020 NX-Schematics & NX-Routing 42
Admin Training
NX-Schematics 3 DaysNX-Routing 2 Days
User Training(if a workable environment exists)
NX-Schematics 2 Days
User Knowledge / Know-HowNX-Gateway / NX-Drafting
NX-Routing 3 Days
User Knowledge / Know-HowNX-Gateway / NX-ModelingNX-Assemblies / NX-Drafting
To work efficient in the NX-Routing environmentThe handling of large assemblies is very important.
NX – Schematics is unique
02.07.2020 NX-Schematics & NX-Routing 43
In the area of electrical Schemata, NX-Schematic can do exactly the same (if not more) than the other database related E-Cad systems, but without an additional database and interface.
NX-Schematic talkes the same language like NX.
DatenbankSysteme
*.plmxl Data exchange*.hrn Data exchange
! NOT Bidirectional !
No Data exchange becauseWe are working within the sameenvironment talking the samelanguage
! Bidirectional !
The Sales and the Siemens SW rail
02.07.2020 NX-Schematics & NX-Routing 44
SI2800
If the customer wants Mentor Capital for 3D cabling then he should take mentor.
But if Mentor is too powerful and or too expensive to make his 3D cabling, you have two options.
NX30148NX30149NX30153NX30154NX30158NX30160NX33000
You know this Prices better thanAnybody else
Offer NX-Schematics and let the customer stay withinThe Siemens NX universe.
Or you allow him to purchase and use a competition product like
and he leaves the Siemens Product universe. (Not Integrated at all)
You know this Prices better thanAnybody else
The ANT and TC Structures
02.07.2020 NX-Schematics & NX-Routing 45
2D environment (TC)(without Routing)
3D environment (TC)(with Routing)
2D environment (Native)(without Routing)
3D environment (Native)(with Routing)
Online Presentation
02.07.2020 NX-Schematics & NX-Routing 46
Presentation on the System
The process from beginning:
1. Explanation of the Software and environment2. Create a small schematic3. Create the 3D Routing4. Change Schematic and Update Routing5. Bidirectional Data
The process with existing parts:
1. Attach Schematic Information2. Create stock3. Change Schematic and update Routing4. Bidirectional Data
1 2
Schematics Routing
Thank you very much
02.07.2020 NX-Schematics & NX-Routing 47
Q & A
02.07.2020 NX-Schematics & NX-Routing 48
Do you have any questions ?