02 Electronix
-
Upload
goswamirishabh -
Category
Documents
-
view
217 -
download
0
Transcript of 02 Electronix
-
8/13/2019 02 Electronix
1/36
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
Electronics The basics of semiconductor physics
Prof. Marta Rencz, Gergely Nagy
BME DED
September 4, 2012
-
8/13/2019 02 Electronix
2/36
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
The basic properties of semiconductors
Semiconductors conductance is between that of conductorsand insulators.
They conduct current and have a negative thermalcoefficient (NTC), which means thattheir conductivitydecreases when temperature rises.
This is exactly the opposite behaviour of metals.
At the moment semiconductors are the basic materials ofelectronic devices.
-
8/13/2019 02 Electronix
3/36
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
The most important semiconductors
The most important semiconductors:Monocristalline or single-cristal materials:
Semiconductor elements: Si (silicon), Ge (germanium)They are used in integrated circuits and semiconducting devices.Compound semiconductors: GaAs (gallium arsenide), GaAsP(gallium arsenide phosphide)They are used to create LEDs.
Amorphous semiconductors: amorphous Si mainlyTFTs, solar cells are made of them.Organic semiconductors: OLEDs (Organic LEDs)
-
8/13/2019 02 Electronix
4/36
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
The band structure I.
The electrons energy is a quantized quantity there arecertain energy levels that are allowed for electrons, the rest ofthe levels are forbidden.
When electrons take part in a system (atom or a crystalline
consisting of many atoms), every electron has to be at adifferent level. The electrons take energy levels very close tothe allowed levels thus in large systems the electrons takeplace in energy bands that are seperated by band gaps.
The energy bands of electrons in alarge insulator/semiconductorstructure.
The bands are shown in grey, theband gaps are white.
S i d i i l Th b i f lid h i PN j i d di d C l l i i h di d
-
8/13/2019 02 Electronix
5/36
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
The band structure II.
Conductance band:electrons that can movefreely.
Valence band: electrons
that take part in bonds andthus are bound to atoms.
From the viewpoint of conductance the important bands:
The highest band that contains electrons (valence band).
The band above the valence band, which is almost empty(conductance band).
The band gap between them.
S i d ti t i l Th b i f lid t t h i PN j ti d di d C l l ti ith di d
-
8/13/2019 02 Electronix
6/36
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
Insulators and conductors
Conductors: the valence band and the conductance bandsoverlap.
Insulators and semiconductors: there are bandgaps thewidth of the bandgap (Wg) decides whether a material is aninsulator or a semiconductor.
Si (semiconductor): Wg = 1.12 eV
SiO2 (insulator): Wg = 4.3 eV
1 eV = 0.16 aJ = 0.161018 J
Semiconducting materials The basics of solid state physics PN junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
7/36
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
The charge carriers I.
Electrons: at the bottom of theconductance band,
Holes: at the top of the valence band ahole is an absence of electron.
Both electrons and holes take part inconductance!
Generation: happens when an electron gets to the
conductance band from the valence band.This means that two charge carriers are created: an electron in the conductance
band and a hole in the valence band.
Recombination: the opposite of generation when an
electron falls back to the valence band.
Semiconducting materials The basics of solid state physics PN junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
8/36
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
The charge carriers II.
Charge and mass of charge carriers
Electrons: have a negative charge and a positive mass.
Holes: have a positive charge and a positive mass (!).This can be explained in solid state physics were not going into such depth.
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
9/36
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
The crystal structure of silicon
3D crystal structure (diamond lattice) Simplified, 2D crystal structure
Silicon has four electrons that take part in the bond betweenits atoms.
Density: = 2.33 gcm3
Lattice constant: a = 0.543 nm
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
10/36
Semiconducting materials The basics of solid state physics PN junctions and diodes Calculations with diodes
The intrinsic silicon
If the temperature is above 0 K, someelectrons become thermally activatedand get into the conductance band.
Intrinsic charge carrier concentration
ni=pi= 1010
/cm3
ni: electron concentration (1/cm3)
pi: hole concentration (1/cm3)
The charge carrier density is very low: a cube with edgesof 10 m contains 10 electrons.
The crystalline is doped in order to increase the chargecarrier density.
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
11/36
g p y j
Doping
A small number ofatoms of a different kind is injectedinto the crystal structure.
This is done in a way that the dopants are placed on positionswhere normally Si atoms are located.
Typical doping density: 1015 1019/ cm3 this is indeeddoping and not alloying (the density is very low).The atom density of silicon is 51022/cm3, so a typical doping of1017/cm3
means that two atom is changed to a dopant out of every one million, which
leaves us with a purity of 99.9998 %.
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
12/36
g p y j
The n-type semiconductors
Donor dopants: dopants that inject atoms that have one extra
electrons at their valence band (P (phosporus), As (arsenic), Sb(antimony)).The extra electron is easier to raise into the conductance band, because it cannot take
part in a strong bond. Thus its energy level is in the band gap, close to the
conductance band.
Electronsare the majoritycharge carriersHolesare the minority charge
carriers
donor concentration: Ndelectron concentration: nn
hole concentration: pn
Concentrations in n-type Si
nn Nn
nn > pn
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
13/36
g y j
The p-type semiconductors
Acceptor dopants: dopants that inject atoms that have one lesselectrons at their valence band (B (boron), Al (aluminium), In(indium)).Less electrons result in extra holes, that are easier to bring down to the valence band,
because they cannot take part in a strong bond. Thus their energy level is in the
band gap, close to the valence band.
Electronsare the minoritycharge carriersHolesare the majority charge
carriers
acceptor concentration: Naelectron concentration: nphole concentration: pp
Concentrations in p-type Si
pp Nppp
> np
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
14/36
Drift current I.
When a semiconductor is placed into an electric field, theelectrons start to drift in the opposite direction of the field.
No external field External field is present
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
15/36
Drift current II.
Drift current is the movement of charge carriers due to anexternal electric field.
Drift velocity is the speed of the charge carriers in the driftcurrent:
Drift velocity
vd = n Evd =p E
wherevd: is the drift velocityn: is the mobility of electrons (Si: n= 1500
cm2
V s)
p: is the mobility of holes (Si: p = 475 cm2
V s)
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
16/36
Diffusion current
Diffusion current: is the movement of charge carriers due to aninhomogeneity in their density.The movement is due to thermally induced movement of the electrons that is always
present at temperatures above 0 K.
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
17/36
The pn-junction: a semiconductor diode I.
A pn-junction is a monocrystalline transitional area where ap-type and an n-type semiconductor is next to each other.
The diode is a device that consists of one single pn-junction.
The figure is distorted: the n-type layer is muchshallowerin reality.
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
18/36
The pn-junction: a semiconductor diode II.
We will be concerned withthe area at the center of thestructure(physical distortions at the borders result in specialeffects that were not dealing with).
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
19/36
Most important properties of the diode
When a forward voltage is applied to it, its current is an
exponential function of the voltage.I exp
VVT
Forward direction: the p side is at a higher potential.In the reverse direction its current is very low and is
independent of the voltage:I 1012 A/mm2
The current-voltage characteristic of the diode:
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
20/36
The electrostatic conditions in the pn-junction
The majority carriers at theproximity of the junction diffuseacross the junction to the otherside.This is because there are a lot of electrons on
the n side, and a lot of holes on the p, whileeach side has a very low density of the
minority charge carriers. There is a huge
gradient in the densisty of charge carriers.
This results in a depleted area / space charge region an
area at the junction which is empty of majority charge carriers.
The dopants left by their extra electrons/holes becomecharged ions that create an electric field, which preventsfurther diffusion by generating a drift current of minority
carriers in the opposite direction.
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
21/36
The operation of the diode
Equilibrium: the diffusion of the majority carriers is inequilibrium with the drift current of the minority carriers(I= 0).
Forward direction: the forward voltage lowers the electricfield of the dopant ions thus increasing the drift current of the
majority carriers (big IF).Reverse direction: the reverse voltage enlarges the electricfield of the dopant ions thus lowering the diffusion current ofthe majority carriers and increasing that of the minoritycarriers moved by the drift current (small IR).
-
8/13/2019 02 Electronix
22/36
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
23/36
The characteristic equation of a real diode
Due to secondary effects the equation in the forwarddirection:
I=I0
e
V
mVT 1
where m is the ideality factor (a.k.a. quality factor or
emission coefficient) it represents several secondary effectsand ranges from 1 to 2.
In the reverse direction: thereverse current of the diode startsto increase steeply with the voltageat the breakdown voltage (VBR).
If the the diodes current is limitedby external means, the breakdown
state does not harm the structure.
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
24/36
The application of the breakdown voltage
As a very small change in the reverse voltage results in a bigchange in the reverse current at the breakdown state, it canbe used to stabilize voltage.
The diode is placed in a negative feedback configuration.
Zener diode: special diode created to serve as a voltagestabiliser in the breakdown state.
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
25/36
The operating point of a diode I.
The characteristic equation of a diode gives all thevoltage-current pairs that a diode can have.
In operation the diode usually works at a certain operating
point, i.e. at one of the voltage-current pairs of its equation.This point isdetermined by the elements surrounding thedevice.
DC analysis: the calculations performed to find the DCoperating point of a non-linear device.
The quantities describing the DC operating point are usuallydenoted with capital letters (V, I).
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
26/36
The operating point of a diode II.
The KVL for the circuit is:
Vt=I Rt+ V
which gives the equation of a line:
I=Vt V
Rt
The line is called the load line it is the characteristicequation of the other element in the circuit (Rt) as a function
of the diodes voltage.
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
27/36
The operating point of a diode III.
The operating point (denoted with M in the figure) is atthe intersecion of the two functions.
If the graphical representation of the equations is given, this iseasy to find.
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
28/36
The approximation of the operating point I.
We take advantage of the fact that the exponential function isvery steep.
The diode is substituted:with a voltage source when it is switched on,with an open circuit when it is switched off.
The value of the voltage source (VD) can be looked up inthe datasheet of the diode (VD 0.7 V).
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
29/36
The approximation of the operating point II.
Weassume that the diode is switched
on.The terminals of the resistor:
left-hand side: supply voltage (Vs),right-hand side: the voltage of the diode(VD).
According to Ohms law:
I=Vs VD
Rl
IfVs= 5 V, VD = 0.7 V, Rl = 1 k then
I=5 0.7
103
= 4.3 mA.
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
30/36
Small-signal analysis I.
It is important to investigate what happens when there are
small changes in the input voltage e.g. when the supplyvoltage changes slightly during operation.
For small changes the exponential function can beapproximated with a linear equation around the operating
point.In terms of the electric model, this means that the diode issubstituted with its differential resistance.
The differential resistance
rd=V
I =
m VTI
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
31/36
Small-signal analysis II.
The differential resistance
rd=
V
I =
m VT
I
Iin the equation of the differential resistance is theoperating point current.
Thus the value of the differential resistance has a very strongdependence on the operating point.
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
-
8/13/2019 02 Electronix
32/36
The small-signal operation of diodes I.
Lets investigate what happens when small changes occur atthe equilibrium state.
Changes around the operating are usually denoted with lowercase letters.
Vs=Vs0+ vs sin(t)
If the changes are small, the diodes voltage and current aresinusoidal functions around the operating point.
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
Th ll l f d d II
-
8/13/2019 02 Electronix
33/36
The small-signal operation of diodes II.
The calculation is performed in three steps:1 the DC operating point is determined,2 the AC analysis is performed by substituting the non-linear
device with its small-signal model and calculating the effects ofthe changes on this model,
3 the two results are added.
DC analysis equilibrium AC analysis small changes
It is important that only small changes can be calculated thisway!
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
Th ll i l i f di d III
-
8/13/2019 02 Electronix
34/36
The small-signal operation of diodes III.
Thecalculation of the small signal operation:
The small-signal changes:
i= vs
Rl+ rd
andu= rd i= rd
Rl+ rdvt
IfRl = 1 k, Vt = 5 V and vt= 1 V:The differential resistance:
rd=VT
I =
26mV
4.3 mA= 6
The change (amplitude) of the diodes current:
i= 1
1.006k 1mA
the change (amplitude) of the diodes voltage:
= = Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
Th Z di d I
-
8/13/2019 02 Electronix
35/36
The Zener diodes I.
Supply voltages can be stabilized usingZener diodes.
Consider the circuit on the left.
Lets find the voltage and current of the Zener diode.Vin= 12 V, R= 150 and VBR = 3.3 V.
As the input voltage is larger than the breakdown voltage:the diode is in the breakdown state.
IVin VBR
R =
12 3.3
0.15 = 60 mA
Semiconducting materials The basics of solid state physics PN-junctions and diodes Calculations with diodes
Th Z di d II
-
8/13/2019 02 Electronix
36/36
The Zener diodes II.
How much does the output voltage change if the inputchanges by 1 V?
The differential resistance is: 3 .
vout=vin
rd
rd+ Rt =
3
153= 20 mV
Thus the change at the input is reduced to 1/50 of its value!