01320
-
Upload
jeffrey-carlo-viduya-agliam -
Category
Documents
-
view
217 -
download
0
Transcript of 01320
-
7/28/2019 01320
1/3
DIVISION 1 - GENERAL REQUIREMENTS
SECTION 01320 -CODES AND STANDARDS
PART 1 - GENERAL
1.01 Description
WORK Included : Throughout the Construction Drawings & Specifications Documents,reference is made to Codes and Standards which establish types of workmanship andquality of materials, and which establish methods for testing and reporting on thepertinent characteristics.
1. It is the CONTRACTORS responsibility to provide materials and workmanshipwhich meet or exceed the specifically named Code or Standards.
2. It is also the CONTRACTORS responsibility, when so required by the ContractDocuments, to deliver to the Company Representative all required proof that thematerials and workmanship, meet or exceed the requirements of the specifically
named Code and Standard. Such proof shall be in the form of a certified report oftests conducted by an approved testing agency.
1.02 QUALITY ASSURANCE
A. CONTRACTOR shall develop a QA/QC plan in accordance with SAUDI ARAMCOStandard, SAEP-1023 and be reviewed and approved by CompanyRepresentative.
B. Familiarity with pertinent Codes and Standards: In procuring all items used inthis WORK, it is the CONTRACTORS responsibility to verify the detailedrequirements of the specifically named Codes and Standards and to verify thatthe items procured for the use in this WORK, equal or exceed the specifiedrequirements.
C. Rejection of Non-Complying Items : Company Representative reserves the rightto reject items incorporated into the WORK which fail to meet the specifiedminimum requirements.
D. The latest issue of the Codes and Standards publications from theorganizations listed below form part of this Construction Specifications. Unlessotherwise stated in these Specifications, the CONTRACTOR shall be responsiblefor full compliance with these Codes and Standards even though they may notbe specifically referenced in each Division, Sections or Sub-Sections. Allconstruction shall comply with the applicable Codes and Standards SAUDI
ARAMCO Engineering Standards, Standard Drawings and Material SystemSpecifications.
SECTION 01320
CONSTRUCTION SPECIFICATIONS
SABG GIRLS ELEMENTARY SCHOOL AND
BOYS INTERMEDIATE SCHOOL
DOC 089/
090 A BE-3157561
of0
MUBARRAZ AND HOFUF 2050 3
-
7/28/2019 01320
2/3
AA Aluminum Association
AAMA Architectural Aluminum Manufacturers Association
AASHTO American Association of State Highway and TransportationOfficials.
ACI American Concrete Institute
AISC American Institute of Steel Construction.
ALSC American Lumber Standards Committee
ANSI American National Standards Institute.
APA American Plywood Association.
ASHRAE American Society of Heating, Refrigeration & A/C Engineers.
ASTM American Society for Testing and Materials
AWPI American Wood Preservative Institute
A W S American Welding Society.
AWWA American Water Works Association.
BHMA Builders Hardware Manufacturers Association.
CRSI Concrete Reinforcing Institute
EIMA Exterior Insulation Manufacturers Association
FM Factory Mutual.
I E S Illumination Engineers Society Lighting Handbook.
MOPTT Kingdom of Saudi Arabia Ministry of Post, Telegraph and TelephoneStandards.
NAAMM National Association Architectural Metal Manufacturers
NEMA National Electrical Manufacturer's Association
N E C National Electric Code.
NFPA National Fire Protection Association.
SECTION 01320
CONSTRUCTION SPECIFICATIONS
SABG GIRLS ELEMENTARY SCHOOL AND
BOYS INTERMEDIATE SCHOOL
DOC 089/
090 A BE-3157562
of0
MUBARRAZ AND HOFUF 2050 3
-
7/28/2019 01320
3/3
NWMA National Woodwork Manufacturers Association.
NWWDA National Wood Window and Door Association.
PCI Precast Concrete Institute.
SACSM SAUDI ARAMCO Construction Safety Manual
SAES SAUDI ARAMCO Engineering Standard
SAMCSRBC Saudi Arabian Ministry of Communications Standards for Roadand Bridge Construction.
SAMSS SAUDI ARAMCO Material System Specifications
SASO Saudi Arabian Standards Organization
SCECO Saudi Consolidated Electric Company Standards
SDI Steel Deck Institute
SMACNA Sheet Metal A/C Contractors National Association.
TCA Tile Council of America
U B C Uniform Building Code.
U L Underwriters Laboratories Inc.
U M C Uniform Mechanical Code.
U P C Uniform Plumbing Code.
USDC United States Department of Commerce
USPSC United States Product Safety Commission
WASA Water And Sewer Agency
STC Saudi Telecom Company
END OF SECTION
SECTION 01320
CONSTRUCTION SPECIFICATIONS
SABG GIRLS ELEMENTARY SCHOOL AND
BOYS INTERMEDIATE SCHOOL
DOC 089/
090 A BE-3157563
of0
MUBARRAZ AND HOFUF 2050 3