01 Physical Principles
-
Upload
andrea-quattrone -
Category
Documents
-
view
20 -
download
1
description
Transcript of 01 Physical Principles
![Page 1: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/1.jpg)
POLYMER TECHNOLOGY AND SUSTAINABILITY AA2010-2011
Review of physical principles (solubility, diffusivity, wettability)
Principles of mixing
Degradation and stabilization
Classification of additives
Compounding of thermoplastics
Rubber technology (vulcanization, reinforcement)
Biodegradation and bioplastics
Polymer recycling
Life cycle assessment
![Page 2: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/2.jpg)
Polymer technology and sustainability
• Frontal lessons
• Exercitations (numerical exercises, experimental techniques with lab, case hystories)
• Seminars led by industrial experts
• Visit to an industrial plant (production of recycled PET nonwovens for roofing)
Final oral exam (in italian or english)
![Page 3: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/3.jpg)
Bibliography:
Copy of all the slides/presentations + (consultation only)
• H. Zweifel, Plastics Additives Handbook, Hanser, Munich 2001
• C. Rauwendaal, Polymer Mixing, Hanser, Munich 1998
• I. Manas-Zloczower, Z. Tadmor, Polymer Mixing and Compounding, Hanser, Munich
1994
• L. Mascia, The Role of Additives in Plastics, Arnold, London 1974
• H.H. Jellinek, Aspects of Degradation and Stabilization of Polymers, Elsevier,
Amsterdam 1978
• F. La Mantia, Handbook of Plastics Recycling, RAPRA, Shawbury 2002
![Page 4: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/4.jpg)
Introduction to the concept of “polymer formulation”
A polymer molecule becomes polymeric materials only when formulated (mixed) with suitable additives
Compounding is the term indicating the industrial process of mixing the raw polymers with additives
Additives are used for the following purposes:– To modify (improve) the material properties (durability, mechanical,
optical etc)– To improve processing– Cost reduction
Additives can be miscible (homogeneous, like stabilizers) as well as heterogeneous (like fillers and pigments)
![Page 5: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/5.jpg)
Classification of additives
Polymer modifiers and processing aids
see for ex. L. Mascia, The Role of Additives in Plastics, Hanser (1985)
1. Additives which assist processing
2. Additives which modify mechanical properties
3. Surface property modifiers
4. Optical properties modifiers
5. Anti-ageing additives
6. Others
![Page 6: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/6.jpg)
Examples of property modifiers (mechanical, electric conductivity, fire retardancy)
Function Structure
Fillers / reinforcing agents Oxides (glass, MgO, SiO2, Al2O3)Hydroxides (Al(OH)3)Salts (CaCO3, BaSO4, CaSO4, fosfati)Silicates (talc, mica, kaolin, clay)Metals
Organics Carbon-graphite, polymeric fibres
Plasticizers Esters, chlorinated paraffins, oxidized vegetal oils
Tougheners Rubbers (EPR, EPDM, NBR, NR, EVA)
Crosslinkers Peroxides, sulphur, silanes.
Fire retardants and smoke suppressants Sb2O3, chlorinated paraffins, Al(OH)3, Mg(OH)2, phosphates, brominted organics
Conductive c. black, graphite, metals
![Page 7: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/7.jpg)
Examples of processing aids and antiageing
Function Examples
Heat stabilizers Primary antioxidants (sterically hindered phenols), hydroperoxide decomposers (organophosphites, thioesters)
Lubricants Fatty acids and their derivatives, paraffin waxes, metallic soaps, ester and amide waxes, silicones, fluoropolymers
AntiagingAntioxidants Phenols, arylamines, phosphites
Metal deactivators Chelants
Photostabilizers Pigments (c. black, TiO2), UV adsorbers, radical scavengers (HALS)
Biocides Thiocompounds, organometallic compounds
![Page 8: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/8.jpg)
Function ExamplesSurface modifiersAntistatics Ethoxylated amines, ammonium salts, non-ionic
surfactants
Antifog Non-ionic surfactants
Antiwear Graphite, PTFE, MoS2
Adhesion promoters Silanes, block and grafted copolymers
Optical properties modifiersPigments
Soluble dyes
Nucleants
Inorganics: oxides (Ti, Fe, Cr), sulfides, chromatesOrganics: c. black, phtalocyanines, azo compounds etc.
Antraquinones, azo and bis-azo compounds
SiO2, talc, benzoates
Blowing agentsPhysical actionChemical action
Hydrocarbons, halocarbons, N2, CO2
NaHCO3, azocarbonamide etc.
![Page 9: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/9.jpg)
Physical principles
Solubility and compatibility
Solubility has a thermodynamic meaning and it involves molecular mixing and formation of single-phase systems.
Compatibility is a technological term which may involve formation of both single-phase and stable multi-phase systems (like most polymer compounds).
Solubility is influenced by m.w., chemical nature, additive amount, matrix morphology etc.
For binary systems at constant pressure we have:
∆Gm = ∆Hm – T ∆Sm
Solubility occurs when ∆Gm < 0.
∆Sm is always positive (mixing increases disorder)
![Page 10: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/10.jpg)
From classical thermodynamics we know:
∆Hm / Vtot = [(∆E1/V1)0.5 – (∆E2/V2)0.5]2 Φ1 Φ2 =(δ1 – δ2)2 Φ1 Φ2
∆Ei vaporization energies, Vi molar volumes, Φi volume fractions
∆Ei/Vi = cohesive energy density CED
(∆Ei/Vi)0.5 = δi solubility parameter
∆Hm is always positive or eventually = 0 (athermal mixing), therefore unfavourable for solubility
![Page 11: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/11.jpg)
Flory-Huggins theory (recall): 2D lattice model
1 = diluent and 2 = polymer
The lattice is made by N1 + xN2 dots
Φ1 = N1 V / (N1 V + x N2 V) = N1/(N1+xN2)
Φ2 = xN2 V / (N1 V + xN2 V) = xN2/(N1+xN2)
![Page 12: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/12.jpg)
The overall change in free energy upon mixing is
∆Gm = -T∆Smid + non ideal contribution
According to Boltzman we have
∆Smid = R lnΩ
with Ω = number of configurations accessibile to the system = No!/(N1!N2!)
We obtain
-T∆Smid = RT (N1 lnΦ1 + N2 lnΦ2)
![Page 13: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/13.jpg)
Interaction parameter χ, = interaction energy between chain segment and diluent (non ideal part, enthalpic contribution)
∆Hm = RTχN1Φ2
Therefore we obtain:
∆Gm/N = RT(Φ1 lnΦ1 + (Φ2/x) lnΦ2 + Φ1 Φ2 χ)
∆Gm / RT = N1 lnΦ1 + N2 lnΦ2 + N1 Φ2 χ
![Page 14: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/14.jpg)
Extension to the case of polymer blends (V/Vr is the number of lattice sites)
∆G’m / RT = (∆Gm / RT) (Vr/V) = ΦA/XA lnΦ1 + ΦB/XB lnΦ2 + ΦA ΦB χ
Mixing entropy tends to zero with increasing m.w.
χ varies from 0 (good miscibility) e 0.5 (theta temperature).
By comparing Flory-Huggins equation and solubility paramater we obtain
χ = V/(NRT) (δ1-δ2)2 = Vr/(RT) (δ1-δ2)2
V/N = molar volume of the solution
![Page 15: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/15.jpg)
Solubility parameter δ
The cohesive energy density is
CED = (∆Hvap – RT)/V
(∆E = ∆H –RT).
The solubility parameter is:
δ = CED0.5 in cal0.5/cm3/2 = 0.4888 MPa0.5
As a general rule materials with similar δ are mutually miscible (solubility).
![Page 16: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/16.jpg)
In case of polymers an experimental determination of δ is unfeasible (distillation).
Indirect methods:• Solubility tests• Swelling tests after crosslinking (better)
![Page 17: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/17.jpg)
Numerical methods (group contribution method, see B. Van
Krevelen, Properties of Polymers, Elsevier,1990):
δ= ΣFi/(Mi/ρ) = ΣFi/Vi
F = molar attraction constant for the solubility parameter
ρ= density.
Chemical group F, in (J.cm3)0.5.mol-1
CH3- 420
-CH2- 280
CH (tertiary) 140
C (quaternary) 0
-CH=CH- 444
-phenyl 1517
-NHCO- 1228
-NHCOO- 1483
-CO- 685
-COO- 512
![Page 18: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/18.jpg)
Hansen solubility parameters: there are various contributions (dispersive, polar, hydrogen bonding) of VdW forces to the overall CED, they must be treated separately.
δ2tot= δ2
d + δ2p + δ2
h
Hansen solubility parameters can be represented graphically in a 3D space
![Page 19: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/19.jpg)
R is the interaction radius of a given polymer; for each additive to be added we can calculate a R’ point
R’ = (2δd,p – 2δd,s)2 + (δp,p – δp,s)2 + (δh,p – δh,s)2
if R’/R < 1 solubility is predicted, this occurs when each ∆δi is < 25%.
![Page 20: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/20.jpg)
![Page 21: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/21.jpg)
![Page 22: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/22.jpg)
Polymer regular solutions theory applied to binary polymer/additive systems
Regular solutions = ∆H whatsoever, ∆S ideal.
∆Gm = ∆Hm – T∆Sm
If the additive are solid crystalline (i.e. stabilizers) with T < Tf, an additional term must be considered:
∆Gf = ∆Hf – T ∆Sf = ∆Hf (1-T/Tf)
since at equilibrium Tf = ∆Hf/∆Sf and ∆Sf = ∆Hf/Tf
![Page 23: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/23.jpg)
The solubility equation is given by the sum of three positive terms
-lnΦa = ∆Hf/RT (1 – T/Tf) + (1-Vp/Va) + χ
with Φa volume fraction of additive
1° term: dipends only on the solid character of the additive2° term: volume ratio (entropic non combinatorial)3° term: polymer-additive interaction parameter (enthalpic)
Solubility Φa will increase on decresing those 3 contributions.
![Page 24: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/24.jpg)
Temperature dependence of solubility (Van’t Hoff plot, assuming V indepedent over T)
-dlnΦa/d(1/T) ≅ ∆Hf/R + dχH/d(1/T) = ∆Hf/R + ∆Hm/R = ∆Hsol/R
Normally solubility increases with T
The experimental determination of additive solubility in apolymer matrix can be carried out putting in contact thetwo materials in form of thin films and measuring the time-dependent diffusion process
![Page 25: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/25.jpg)
Examples, Van’t Hoff plot for 3 stabilizers in PP (the slope is proportional to ∆Hsol) and solubility tables
![Page 26: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/26.jpg)
![Page 27: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/27.jpg)
![Page 28: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/28.jpg)
Physical state of additives in polymers:
Various cases are feasible as shown by phase diagrams
Horizontal line: temperature quenching after compounding
Curve A : the additive is always insoluble (es. fillers and pigments)Curve B: additive is always soluble (es. plasticizer)Curve C: solubility at high temperature with following phase separation when the
polymer is still molten (microparticle formation, they act as reservoirs)Curve D: solubility at high temperature with following phase separation only when the
polymer is already solid (metastabile states, blooming)
![Page 29: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/29.jpg)
Diffusion
Diffusion is a mass transfer driven by a concentration gradient.
It is important for the following features:
• mechanisms of loss of additives (leaching, blooming, food contamination etc)
• mechanism of action of some additives which need to move for being effective (i.e. stabilizers)
• formulation of barrier polymers (packaging)
![Page 30: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/30.jpg)
Hp: one molecule, monodirectional flow through a isotropic surface A
1° Fick’s law: Flux = J = 1/A dm/dt = - D (dC/dx) (J in kg/m2 s)
This is the law concerning steady diffusion (J constant with time)D = diffusion coefficient (in m2/s)The concentration gradient is given by
dC/dx = (CA-CB)/(xA-xB)
2° Fick’s law: dC/dt = D (d2C/dx2)
It can be applied for cases when both J and dC/dX can change over time.Only approximated solutions with known boundary conditions are feasible
![Page 31: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/31.jpg)
We can determine D by measuring the amount of additivepermeated into the polymer film Mt vs. time (sorption curves)
Mt / M∞ = K tn
1. case I, or fickian diffusion, with n = 0.5. The rate of diffusion is << polymer relaxation times.
2. case II, with n=1. The rate of diffusion is >> relaxation times (solvent stress crazing)
3. anomalous diffusion, with n comprised between 0.5 and 1.
In case of fickian diffusion (frequent) we draw the Mt-t1/2 curve
![Page 32: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/32.jpg)
Various anomalies are feasible
![Page 33: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/33.jpg)
Determination of D (simplified 2° Fick’s law solution): from theslope k of the initial part of the sorption curve (for M / M∞ < 0.4)
b = film thickness
M / M∞ = 4/b (D t/π)0.5
k = 4M∞/b (D/π)0.5
Determination of S (solubility coefficient): from the limiting, asymptotic value of the sorption curve
The permeability coefficient P will be given by
P = D· S
S is thermodynamic and will depend mainly on ∆δ
D is kinetic and will depend on free volume /Tg
![Page 34: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/34.jpg)
Morphology effect on D: diffusion involves only amorphous phases
Temperature effect:D = Do exp(-ED/RT)
![Page 35: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/35.jpg)
Effect of polymer type:
D = Do exp(-ED/RT) exp(-Bd/f)
f = fractional free volume of the polymer (related to T-Tg) Bd = volumetric parameter proper of the additive
![Page 36: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/36.jpg)
![Page 37: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/37.jpg)
Effect of molecular weight:
D = KM-a a = 1.5 – 2.5Increasing the m.w. of the additive means lower solubility but also less migration
![Page 38: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/38.jpg)
Wettability
The property is important for the following features:
• property modification: development of polimeric compounds with tailored surface properties – (lower wettability means hyprophobic treatmants, antistick-
release etc.)– (higher wettability means better inkability, adhesivity etc)
• processing aid: better wetting of solid additives (pigments) during mixing, work of adhesion etc.
![Page 39: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/39.jpg)
Wetting of a solid involves the displacement of air by the action of a liquid (like a molten polymer)
Surface = interphase between solid and gasInterface = interphase between solids and/or liquids
An interphase can be represented thermodynamically as the reversibile work dW spent to create it, as in the case of formation of a soap film
![Page 40: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/40.jpg)
Surface energy Γ
dW = Γ.l.dX
Γ = ∆Es/∆A (in J/m2)
∆Es = energy spent to increase the interfacial area of ∆A.
Surface tensioni s the tangential stress opposed by the liquid to the creation of a new surface (in N/m)
For liquid systems surface energy and surface tension are equivalent and the term are used interchangeably in polymer technology.
![Page 41: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/41.jpg)
Surface tension = the surface atoms are in an energetically anisotropic state and tend to return in the bulk putting the material in a state of tension.
The surface tension depend on the intensity of cohesive forces (polarity of material)
High surface tension solid = easy wettabilityLow surface tension solid = difficult wettability
Typical Γ for polymers 20-50 mN/mTypical Γ for ionic solids (fillers, pigments) >200 mN/m
![Page 42: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/42.jpg)
Surface tension of a solid can be estimated through measurements of contact angle θ.
Contact anglethe angle at which a liquid/vapor interface meets a solid surface
![Page 43: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/43.jpg)
Young equation (thermodynamic equilibrium, ideal case for rigid, homogenous and flat surfaces):
Γlv cos θ = Γsv – ΓslΓlv = surface tension of the liquid in equilibrium with vapour (known)Γsv = surface tension of the solid in eq. with vapour (unknown)Γsl = interfacial tension
Vectorial form of Young equation:
Better surface wetting for cos θ → 1, favored by high Γsv and low ΓlvComplete wetting when Γsv > Γsl + Γlv
vapour
liquid
solid
Γsv
θ Γsl
Γlv
![Page 44: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/44.jpg)
Critical surface tension of wetting Γc (Zisman) Estrapolation of Γ to zero angle (cos θ=1) from measurements with homologousseries of liquids
Note = the extrapolated value will depend on the choice of the solvent series
![Page 45: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/45.jpg)
It’s better to separate dispersive and polar contributions of surface tension.
Fowkes:
Γ = Γd + Γp + Γh + …
Owens-Wendt method: calculation of the interfacial tension Γsl according to a geometric mean approximation, to be used in the Young equation:
Γsl = Γsv + Γlv -2(Γsvd. Γlv
d)0.5 – 2(Γsvp. Γlv
p)0.5
Measurements with at least two liquids with known surface tension components are needed to solve the equation system, generally waterand diiodomethane are used.
The final result will be Γsv = Γsvd + Γsv
p , generally higher than Γc
![Page 46: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/46.jpg)
Polymer wettability depend on their polarity.Fluoropolymers show the least wettability values, while polymers with polar bonds (like polyamides) are those with highest surface tension
![Page 47: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/47.jpg)
Contact angle hysteresis
Real surfaces show difference in advancing and receding contact angle during dynamic experiments
Hysteresis is due to roughness and/or chemical heterogeneity.Time-dependent hysteresis is due to sorption or surface enrichment
of specific functional groups (see antifog additives).
![Page 48: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/48.jpg)
Work of adhesion
A good wetting is needed but not enough to achieve a efficient pigment/filler dispersion in a polymer compound. We need also avery high interfacial adhesion
Duprè equation (work of adhesion Wa)
Wa = Γ1 + Γ2 - Γ12 = Γsv - Γsl + Γlv
Young-Duprè equation:
Wa = Γlv (1 + cos θ)
Best adhesion is achieved for high surface tension liquids capable togive low contact angle with the surface
![Page 49: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/49.jpg)
How to estimate interfacial tension?
Γ12 = Γ1 + Γ2 -2Φ(Γ1 Γ2)0.5 ≅ (Γ10.5 – Γ2
0.5)2
with Wa = 2Φ(Γ1 Γ2)0.5
Φ = interaction parameter of Good-Girifalco→ 1 per materials with comparable polarity→ 0 for materials with different polarity
polarity = Γp / (Γp + Γd).
![Page 50: 01 Physical Principles](https://reader034.fdocuments.in/reader034/viewer/2022042616/55cf9d69550346d033ad839e/html5/thumbnails/50.jpg)
Example: dispersing agents/compatibilizers for polymer compounding
Several compatibilizers are also used to lower interfacial tension ion polymer blends.
method example
Functionalized polymers giving strong interactions/chemical bonds
PVC/NBR, PVC/MBSPA6/EPR-g-MA
Copolymer with miscible segmentEPDM/PMMA + EPDM-g-MAPS/EPDM + S-EB-SPVC/PS + PCL-b-PS
Copolymer with reactive groupsPA6,6/EPM + EPM-g-MAPA6/PP + PP-g-AA
Low molecular weight chemicalsPA6,6/PET + p-TSOHNR/PA6 + peroxides